Publikationen 2017

Between Scylla and Charybdis: Balancing Among Structural Stability and Energy Density of Layered NCM Cathode Materials for Advanced Lithium-Ion Batteries.
de Biasi, L.; Kondrakov, A. O.; Geßwein, H.; Brezesinski, T.; Hartmann, P.; Janek, J.
2017. The journal of physical chemistry <Washington, DC> / C, 121 (47), 26163–26171. doi:10.1021/acs.jpcc.7b06363

Shape-controlled synthesis of hierarchically layered lithium transition-metal oxide cathode materials by shear exfoliation in continuous stirred-tank reactors.
Hua, W.; Wu, Z.; Chen, M.; Knapp, M.; Guo, X.; Indris, S.; Binder, J. R.; Bramnik, N. N.; Zhong, B.; Guo, H.; Chou, S.; Kang, Y.-M.; Ehrenberg, H.
2017. Journal of materials chemistry / A, 5 (48), 25391–25400. doi:10.1039/C7TA08073E

New insights into phosphate based materials for the immobilisation of actinides.
Neumeier, S.; Arinicheva, Y.; Ji, Y.; Heuser, J. M.; Kowalski, P. M.; Kegler, P.; Schlenz, H.; Bosbach, D.; Deissmann, G.
2017. Radiochimica acta, 105 (11), 961–984. doi:10.1515/ract-2017-2819

OLED Luminaires : Device Arrays with 99.6% Geometric Fill Factor Structured by Femtosecond Laser Ablation.
García, J. F.; Höfle, S.; Zhang, M.; Dlugosch, J.; Friedrich, T.; Wagner, S.; Colsmann, A.
2017. ACS applied materials & interfaces, 9 (43), 37898–37904. doi:10.1021/acsami.7b12356

Effect of moisture in sweep gas on chemical compatibility between ceramic breeder and EUROFER97.
Mukai, K.; Gonzalez, M.; Knitter, R.
2017. Fusion engineering and design, 125, 154–159. doi:10.1016/j.fusengdes.2017.10.001

Charge Transfer-Induced Lattice Collapse in Ni-Rich NCM Cathode Materials during Delithiation.
Kondrakov, A. O.; Geßwein, H.; Galdina, K.; De Biasi, L.; Meded, V.; Filatova, E. O.; Schumacher, G.; Wenzel, W.; Hartmann, P.; Brezesinski, T.; Janek, J.
2017. The journal of physical chemistry <Washington, DC> / C, 121 (44), 24381–24388. doi:10.1021/acs.jpcc.7b06598

Micron‐Sized Pored Membranes Based on Polyvinylidene Difluoride Hexafluoropropylene Prepared by Phase Inversion Techniques.
Hofmann, A.; Thißen, E.; Migeot Matthias; Bohn, N.; Dietrich, S.; Hanemann, T.
2017. Polymers, 9 (10), 489/1–12. doi:10.3390/polym9100489

Failure behavior of high performance porcelain insulators = Versagensverhalten von Hochspannungs-Tonerde-Porzellanisolatoren.
Hettich, P.; Schell, K. G.; Oberacker, R.; Bucharsky, E. C.; Schulte-Fischedick, J.; Hoffmann, M. J.
2017. Materialwissenschaft und Werkstofftechnik, 48 (8), 792–796. doi:10.1002/mawe.201700034

LiCaFeF₆ : A zero-strain cathode material for use in Li-ion batteries.
Biasi, L. de; Lieser, G.; Dräger, C.; Indris, S.; Rana, J.; Schumacher, G.; Mönig, R.; Ehrenberg, H.; Binder, J. R.; Geßwein, H.
2017. Journal of power sources, 362, 192–201. doi:10.1016/j.jpowsour.2017.07.007

Cutting edge of R&D in solid tritium breeder materials. Towards the ’solid’ blankets.
Hoshino, T.; Mukai, K.; Kolb, M. H. H.; Knitter, R.
2017. Journal of plasma and fusion research, 93 (2), 83–90

Thermal evolution of polar nanoregions identified by the relaxation time of electric modulus in the Bi${}_{1/2}$Na${}_{1/2}$TiO${}_3$ system.
Liu, L.; Ma, X.; Knapp, M.; Ehrenberg, H.; Peng, B.; Fang, L.; Hinterstein, M.
2017. epl, 118 (4), Art. Nr. 47001. doi:10.1209/0295-5075/118/47001

Behaviour of advanced tritium breeder pebbles under simultaneous action of accelerated electrons and high temperature.
Zarins, A.; Leys, O.; Kizane, G.; Supe, A.; Baumane, L.; Gonzalez, M.; Correcher, V.; Boronat, C.; Zolotarjovs, A.; Knitter, R.
2017. Fusion engineering and design, 121, 167–173. doi:10.1016/j.fusengdes.2017.06.033

Nonlinear mechanical behaviour of Ba0.5Sr0.5Co0.8Fe0.2O3 − δ and in situ stress dependent synchrotron X-ray diffraction study.
Geiger, P. T.; Clemens, O.; Khansur, N. H.; Hinterstein, M.; Sahini, M. G.; Grande, T.; Tung, P.; Daniels, J. E.; Webber, K. G.
2017. Solid state ionics, 300, 106–113. doi:10.1016/j.ssi.2016.11.027

Electric-Field-Induced Phase Transition in Mn-Doped (K0.48Na0.48Li0.04)NbO3 Lead-Free Ceramics.
Mgbemere, H. E.; Schneider, G. A.; Schmitt, L.; Hinterstein, M.
2017. Journal of ceramic science and technology, 8 (1), 45–52. doi:10.4416/JCST2016-00074

Diffusion of water in silica glass in the absence of stresses.
Wiederhorn, S. M.; Rizzi, G.; Wagner, S.; Hoffmann, M. J.; Fett, T.
2017. Journal of the American Ceramic Society, 100 (9), 3895–3902. doi:10.1111/jace.14937

Identification of residual stress layers at glass surfaces via crack terminating angles.
Schell, K. G.; Wagner, S.; Hettich, P.; Fett, T.; Rizzi, G.; Hoffmann, M. J.
2017. Journal of the American Ceramic Society, 100 (9), 4173–4179. doi:10.1111/jace.14964

Tracing the oxygen isotope composition of the upper Earth’s atmosphere using cosmic spherules.
Pack, A.; Höweling, A.; Hezel, D. C.; Stefanak, M. T.; Beck, A.-K.; Peters, S. T. M.; Sengupta, S.; Herwartz, D.; Folco, L.
2017. Nature Communications, 8, Art. Nr.: 15702. doi:10.1038/ncomms15702

Präparation weichmagnetischer Kompositwerkstoffe für strukturelle und mikromechanische Untersuchungen [Preparing Soft Magnetic Composites for Structural and Micromechanical Investigations].
Schwark, T.; Müller, M.; Mine, Y.; Kreuter, T.; Kraft, O.; Schwaiger, R.
2017. Practical Metallography : Praktische Metallographie, 54 (6), 366–387. doi:10.3139/147.110424

Ferroelectric domains in methylammonium lead iodide perovskite thin-films.
Röhm, H.; Leonhard, T.; Hoffmann, M. J.; Colsmann, A.
2017. Energy & environmental science, 10 (4), 950–955. doi:10.1039/C7EE00420F

Implementation of Ba${}_{0.6}$Sr${}_{0.4}$TiO₃-ZnO-B₂O₃ based tunable microwave phase shifters in LTCC technology.
Kohler, C.; Nikfalazar, M.; Heunisch, A.; Schulz, B.; Mikolajek, M.; Rabe, T.; Jakoby, R.; Binder, J. R.
2017. International journal of applied ceramic technology, 14 (4), 574–582. doi:10.1111/ijac.12687

Two-Dimensional Beam-Steering Phased-Array Antenna With Compact Tunable Phase Shifter Based on BST Thick Films.
Nikfalazar, M.; Sazegar, M.; Mehmood, A.; Wiens, A.; Friederich, A.; Maune, H.; Binder, J. R.; Jakoby, R.
2017. IEEE antennas and wireless propagation letters, 16, 585–588. doi:10.1109/LAWP.2016.2591078

Tritium adsorption/release behaviour of advanced EU breeder pebbles.
Kolb, M. H. H.; Rolli, R.; Knitter, R.
2017. Journal of nuclear materials, 489, 229–235. doi:10.1016/j.jnucmat.2017.03.051

Three-dimensional printing of transparent fused silica glass.
Kotz, F.; Arnold, K.; Bauer, W.; Schild, D.; Keller, N.; Sachsenheimer, K.; Nargang, T. M.; Richter, C.; Helmer, D.; Rapp, B. E.
2017. Nature <London>, 544 (7650), 337–339. doi:10.1038/nature22061

Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds.
Dai, W.; Pupeschi, S.; Hanaor, D.; Gan, Y.
2017. Fusion engineering and design, 118, 45–51. doi:10.1016/j.fusengdes.2017.03.073

Chemical compatibility study between ceramic breeder and EUROFER97 steel for HCPB-DEMO blanket.
Mukai, K.; Sanchez, F.; Knitter, R.
2017. Journal of nuclear materials, 488, 196–203. doi:10.1016/j.jnucmat.2017.03.018

Effective thermal conductivity of advanced ceramic breeder pebble beds.
Pupeschi, S.; Knitter, R.; Kamlah, M.
2017. Fusion engineering and design, 116, 73–80. doi:10.1016/j.fusengdes.2017.01.026

Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries.
Kondrakov, A. O.; Schmidt, A.; Xu, J.; Geßwein, H.; Mönig, R.; Hartmann, P.; Sommer, H.; Brezesinski, T.; Janek, J.
2017. The journal of physical chemistry <Washington, DC> / C, 121 (6), 3286–3294. doi:10.1021/acs.jpcc.6b12885

Investigation of the wetting behavior of Na and Na alloys on uncoated and coated Na-β”-alumina at temperatures below 150 °C.
Ahlbrecht, K.; Bucharsky, C.; Holzapfel, M.; Tübke, J.; Hoffmann, M. J.
2017. Ionics, 23 (5), 1319–1327. doi:10.1007/s11581-017-2017-x

Influence of synthesis, dopants and cycling conditions on the cycling stability of doped LiNi0.5Mn1.5O4 spinels.
Höweling, A.; Stoll, A.; Schmidt, D. O.; Geßwein, H.; Simon, U.; Binder, J. R.
2017. Journal of the Electrochemical Society, 164 (1), A6349-A6358. doi:10.1149/2.0521701jes

Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities.
Zariņš, A.; Valtenbergs, O.; Ķizane, G.; Supe, A.; Tamulevičius, S.; Andrulevičius, M.; Pajuste, E.; Baumane, L.; Leys, O.; Kolb, M. H. H.; Knitter, R.
2017. Fusion engineering and design, 124, 934–939. doi:10.1016/j.fusengdes.2017.01.008

Double layer electrical conductivity as a stability criterion for concentrated colloidal suspensions.
Cruz, R. C. D.; Segadães, A. M.; Oberacker, R.; Hoffmann, M. J.
2017. Colloids and surfaces / A, 520, 9–16. doi:10.1016/j.colsurfa.2017.01.059

CAD-assisted modeling of high dielectric contrast composite materials.
Wiens, A.; Kohler, C.; Hansli, M.; Schuessler, M.; Jost, M.; Maune, H.; Binder, J. R.; Jakoby, R.
2017. Journal of the European Ceramic Society, 37, 1487–1494. doi:10.1016/j.jeurceramsoc.2016.10.032

Li₄SiO₄ based breeder ceramics with Li₂TiO₃, LiAlO₂ and LiₓLayTiO₃ additions, part I: Fabrication.
Kolb, M. H. H.; Mukai, K.; Knitter, R.; Hoshino, T.
2017. Fusion engineering and design, 115, 39–48. doi:10.1016/j.fusengdes.2016.12.033

Li₄SiO₄ based breeder ceramics with Li₂TiO₃, LiAlO₂ and LiₓLaYTiO₃ additions, part II: Pebble properties.
Kolb, M. H. H.; Knitter, R.; Hoshino, T.
2017. Fusion engineering and design, 115, 6–16. doi:10.1016/j.fusengdes.2016.12.038

A comparison of power controlled flash sintering and conventional sintering of strontium titanate.
Lemke, F.; Rheinheimer, W.; Hoffmann, M. J.
2017. Scripta materialia, 130, 187–190. doi:10.1016/j.scriptamat.2016.12.008

Investigation of binder distribution in graphite anodes for lithium-ion batteries.
Müller, M.; Pfaffmann, L.; Jaiser, S.; Baunach, M.; Trouillet, V.; Scheiba, F.; Scharfer, P.; Schabel, W.; Bauer, W.
2017. Journal of power sources, 340, 1–5. doi:10.1016/j.jpowsour.2016.11.051

Microstructure and mechanical properties of Li0.33La0.567TiO3.
Schell, K. G.; Lemke, F.; Bucharsky, E. C.; Hintennach, A.; Hoffmann, M. J.
2017. Journal of materials science, 52 (4), 2232–2240. doi:10.1007/s10853-016-0516-1

The equilibrium crystal shape of strontium titanate: Impact of donor doping.
Rheinheimer, W.; Altermann, F. J.; Hoffmann, M. J.
2017. Scripta materialia, 127, 118–121. doi:10.1016/j.scriptamat.2016.09.017