Home | english  | Impressum | Datenschutz | Sitemap | KIT
gibmeier

Dr.-Ing. Jens Gibmeier

Abteilungsleiter, Strahlenschutzbeauftragter
Struktur und Spannungsanalyse
Gruppe: SuS
Raum: 028, Geb. 10.91
Tel.: +49 721 608 42675
Fax: +49 721 608 48044
jens gibmeierVul5∂kit edu

Geb. 10.91



Hier finden Sie die Abteilung Struktur und Spannungsanalyse.

Lebenslauf

  akademischer Oberrat und Leiter der Abteilung "Struktur- und Spannungsanalyse"
seit 02/2013 KIT Associate Fellow
seit 05/2008 wiss. Angestellter am Institut für Werkstoffkunde I (IWK I) der Universität Karlsruhe (TH)
2006 – 2008 wissenschaftlicher Mitarbeiter am Hahn-Meitner-Institut Berlin, c/o Bessy II, Strahlrohrbetreuer Materialforschungsbeamline EDDI
2004 Promotion zum Dr.-Ing. an der Fakultät für Maschinenbau der Universität Kassel über das Thema: Zum Einfluss von Last- und Eigenspannungen auf die Ergebnisse instrumentierter Eindringhärteprüfungen (Doktorvater: Prof. Dr.-Ing. B. Scholtes)
1999 – 2005 wissenschaftlicher Mitarbeiter am Institut für Werkstofftechnik - FG Metallische Werkstoffe - an der Universität Kassel
1999 Diplomarbeit II, Thema: Predicting thermal residual stresses in functionally graded WC-Co with a gradient in Co content using FEM (ANSYS) - Comparison with experimental results (Bearbeitung des Diplomthemas II an der Universität von Linköping, Schweden)
1998 Diplomarbeit I, Thema: Untersuchung plastischer Dehnungsanteile bei der Bohrlochmethode - FEM-Modellierung experimentell ermittelter Dehnungsverläufe
1991 - 1999 Studium Maschinenbau, Fakultät für Maschinenbau – Institut für Werkstofftechnik -an der Universität Kassel

Forschungsfelder

 

  • Ermittlung und Bewertung von Eigenspannungen in Strukturwerkstoffen und maschinenbaulichen Bauteilen
  • In-situ Ermittlung von mechanischen Spannungen in heterogenen Werkstoffen mit Diffraktionsmethoden unter mechanischer und thermischer Beanspruchung
  • In-situ Charakterisierung der Umwandlungskinetik und der Entwicklung mechanischer Spannungen beim Schweißen und beim Laserstrahlhärten mittels Synchrotron-Röntgenbeugung
  • Weiterentwicklung von mechanischen Methoden zur Eigenspannungsanalytik
  • Entwicklung/Etablierung eines Aufbaus für Phasenkontrast-CT an einer Laborquelle

Veröffentlichungen


Non-destructive Neutron Surface Residual Stress Analysis.
Rebelo Kornmeier, J.; Hofmann, M.; Gan, W. M.; Gibmeier, J.; Saroun, J.
2019. Journal of nondestructive evaluation, 38 (3), Art.-Nr.: 79. doi:10.1007/s10921-019-0617-2
Fast neutron surface strain scanning with high spatial resolution.
Rebelo Kornmeier, J.; Hofmann, M.; Luzin, V.; Gibmeier, J.; Saroun, J.
2019. Materials characterization, 154, 53–60. doi:10.1016/j.matchar.2019.05.031
Electrocautery Damage Can Reduce Implant Fatigue Strength – Cases and in Vitro Investigation.
Sonntag, R.; Gibmeier, J.; Pulvermacher, S.; Mueller, U.; Eckert, J.; Braun, S.; Reichkendler, M.; Kretzer, J. P.
2019. The journal of bone & joint surgery / A, 101 (10), 868–878. doi:10.2106/JBJS.18.00259
20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification.
Gruber, D. P.; Kiefer, D.; Rössler, R.; Beckmann, F.; Tkadletz, M.; Klünsner, T.; Czettl, C.; Keckes, J.; Gibmeier, J.
2019. International journal of refractory metals & hard materials, 82, 121–128. doi:10.1016/j.ijrmhm.2019.04.004
Internal load transfer in an interpenetrating metal/ceramic composite material studied using energy dispersive synchrotron X-ray diffraction.
Roy, S.; Gibmeier, J.; Schell, K. G.; Bucharsky, E. C.; Weidenmann, K. A.; Wanner, A.; Hoffmann, M. J.
2019. Materials science and engineering / A, 753, 247–252. doi:10.1016/j.msea.2019.03.049
Phase-specific residual stresses induced by deep drawing of lean duplex steel: measurement vs. simulation.
Simon, N.; Erdle, H.; Walzer, S.; Gibmeier, J.; Böhlke, T.; Liewald, M.
2019. Production engineering, 13 (2), 227–237. doi:10.1007/s11740-019-00877-4
In situ analysis of the strain evolution during welding using low transformation temperature filler materials.
Dixneit, J.; Vollert, F.; Kromm, A.; Gibmeier, J.; Hannemann, A.; Fischer, T.; Kannengiesser, T.
2019. Science and technology of welding and joining, 24 (3), 243–255. doi:10.1080/13621718.2018.1525150
Experimental and Simulative Studies on Residual Stress Formation for Laser-Beam Surface Hardening.
Kiefer, D.; Schüssler, P.; Mühl, F.; Gibmeier, J.
2019. HTM - journal of heat treatment and materials, 74 (1), 23–35. doi:10.3139/105.110374
Two-scale simulation of the hot stamping process based on a Hashin–Shtrikman type mean field model.
Neumann, R.; Schuster, S.; Gibmeier, J.; Böhlke, T.
2019. Journal of materials processing technology, 267, 124–140. doi:10.1016/j.jmatprotec.2018.11.013
Study of stability of microstructure and residual strain after thermal loading of plasma sprayed YSZ by through surface neutron scanning.
Gibmeier, J.; Back, H. C.; Mutter, M.; Vollert, F.; Rebelo-Kornmeier, J.; Mücke, R.; Vaßen, R.
2018. Physica / B, 551, 69–78. doi:10.1016/j.physb.2017.12.014
Treatment of spatial resolution effects in neutron residual strain scanning.
Šaroun, J.; Rebelo-Kornmeier, J.; Gibmeier, J.; Hofmann, M.
2018. Physica / B, 551, 468–471. doi:10.1016/j.physb.2018.01.013
In-Situ Synchrotron X-Ray Diffraction Studies in the Chip Formation Zone During Orthogonal Metal Cutting.
Gibmeier, J.; Kiefer, D.; Hofsaess, R.; Schell, N.
2018. Residual Stresses, 11. September 2018. Ed.: M. Seefeldt, 39–44, Materials Research Forum LLC, Millersville (PA). doi:10.21741/9781945291890-7
Neutron Strain Scanning of Duplex Steel Subjected to 4-Point-Bending with Particular Regard to the Strain Free Lattice Parameter D0.
Pulvermacher, S.; Gibmeier, J.; Šaroun, J.; Rebelo Kornmeier, J.; Vollert, F.; Pirling, T.
2018. Residual Stresses, 11. September 2018. Ed.: M. Seefeldt, 15–20, Materials Research Forum LLC, Millersville (PA). doi:10.21741/9781945291890-3
Vacuum plasma spraying of functionally graded tungsten/EUROFER97 coatings for fusion applications.
Vaßen, R.; Rauwald, K.-H.; Guillon, O.; Aktaa, J.; Weber, T.; Back, H. C.; Qu, D.; Gibmeier, J.
2018. Fusion engineering and design, 133, 148–156. doi:10.1016/j.fusengdes.2018.06.006
Experimental and numerical analyses of residual stresses induced by tube drawing.
Vollert, F.; Lüchinger, M.; Schuster, S.; Simon, N.; Gibmeier, J.; Kern, K.; Schreiner, M.; Tillmann, W.
2018. The journal of strain analysis for engineering design, 53 (5), 364–375. doi:10.1177/0309324718770339
Reliable Residual Stress Analysis for Thin Metal Sheets by Incremental Hole Drilling [jn press].
Simon, N.; Mrotzek, T.; Gibmeier, J.
2018. Materials Performance and Characterization, 7 (4). doi:10.1520/MPC20170111
Influence of coating thickness on residual stress and adhesion-strength of cold-sprayed Inconel 718 coatings.
Singh, R.; Schruefer, S.; Wilson, S.; Gibmeier, J.; Vassen, R.
2018. Surface and coatings technology, 350, 64–73. doi:10.1016/j.surfcoat.2018.06.080
Fast Temporal and Spatial Resolved Stress Analysis at Laser Surface Line Hardening of Steel AISI 4140.
Kiefer, D.; Gibmeier, J.; Beckmann, F.
2018. MECA SENS 2017 - 9th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation, Skukuza, South Africa, 19-21. September 2017. Ed.: D. Marais, 91–96, Materials Research Forum LLC, Millersville (PA). doi:10.21741/9781945291678-14
Effect of Residual Stress Relaxation due to Sample Extraction on the Detectability of Hot Crack Networks in LTT Welds by means of μCT.
Vollert, F.; Dixneit, J.; Gibmeier, J.
2018. 9th International Conference on mechanical Stress Evaluation by Neutron and Synchrotron Radiation (MECA SENS), Skukuza Rest Camp, Kruger National Park, South Africa, 19 - 21 September 2017. Ed.: D. Marais, 85–90, Materials Research Forum LLC, Millersville (PA). doi:10.21741/9781945291678-13
Two-Dimensional Residual Stress Mapping of Multilayer LTT Weld Joints Using the Contour Method.
Vollert, F.; Gibmeier, J.; Rebelo-Kornmeier, J.; Dixneit, J.; Pirling, T.
2018. Materials Performance and Characterization, 7 (4). doi:10.1520/MPC20170110
Process dependent porosity and the influence of shot peening on porosity morphology regarding selective laser melted AlSi10Mg parts.
Damon, J.; Dietrich, S.; Vollert, F.; Gibmeier, J.; Schulze, V.
2018. Additive manufacturing, 20, 77–89. doi:10.1016/j.addma.2018.01.001
Residual Stress Depth Distributions for Atmospheric Plasma Sprayed MnCoFeO Spinel Layers on Crofer Steel Substrate.
Vaßen, R.; Mücke, R.; Gibmeier, J.; Back, H. C.; Mutter, M.
2017. Materials science forum, 905, 174–181. doi:10.4028/www.scientific.net/MSF.905.174
In Situ EDXRD Study of MAG-Welding Using LTT Weld Filler Materials under Structural Restraint.
Buslaps, T.; Gibmeier, J.; Kromm, A.; Kannengiesser, T.; Vollert, F.; Dixneit, J.
2017. Materials science forum, 905 (107-113). doi:10.4028/www.scientific.net/MSF.905.107
Residual stresses of LTT welds in large-scale components.
Dixneit, J.; Kromm, A.; Boin, M.; Wimpory, R. C.; Kannengiesser, T.; Gibmeier, J.; Schroepfer, D.
2017. Welding in the world, 61 (6), 1089–1097. doi:10.1007/s40194-017-0502-5
Qualification of the stream finishing process for surface modification.
Schulze, V.; Gibmeier, J.; Kacaras, A.
2017. CIRP annals, manufacturing technology, 66 (1), 523–526. doi:10.1016/j.cirp.2017.04.079
Eigenspannungszustände atmosphärisch plasmagespritzter Schichten.
Mutter, M.; Mauer, G.; Mücke, R.; Vaßen, R.; Back, H. C.; Gibmeier, J.
2017. Thermal spray bulletin, 69, 52–60
Influence of shot peening on the mechanical properties of bulk amorphous Vitreloy 105*.
Grell, D.; Gibmeier, J.; Dietrich, S.; Silze, F.; Böhme, L.; Schulze, V.; Kühn, U.; Kerscher, E.
2017. Surface engineering, 33 (9), 721–730. doi:10.1080/02670844.2017.1282712
Consideration of Tool Chamfer for Realistic Application of the Incremental Hole-Drilling Method.
Simon, N.; Gibmeier, J.
2017. Residual Stresses 2016 - ICRS-10. Ed.: T. Holden, 473–478, Materials Research Forum LLC., Millersville (PA). doi:10.21741/9781945291173-80
In-situ Monitoring of Laser Surface Line Hardening by Means of Synchrotron X-Ray Diffraction.
Kiefer, D.; Gibmeier, J.; Beckmann, F.; Wilde, F.
2016. Materials research proceedings, 2, 467–472. doi:10.21741/9781945291173-79
Influence of Heat Control on Residual Stresses in Low Transformation Temperature (LTT) Large Scale Welds.
Dixneit, J.; Kromm, A.; Boin, M.; Kannengiesser, T.; Gibmeier, J.
2017. Materials research proceedings, 2, 223–228. doi:10.21741/9781945291173-38
Local Residual Stress Analysis on Deep Drawn Cups by Means of the Incremental Hole-Drilling Method.
Schuster, S.; Pagenkopf, J.; Gibmeier, J.
2017. Materials research proceedings, 2, 187–192. doi:10.21741/9781945291173-32
Residual Stress States After Piezo Peening Treatment at Cryogenic and Elevated Temperatures Predicted by FEM Using Suitable Material Models.
Klumpp, A.; Tamam, M.; Lienert, F.; Dietrich, S.; Gibmeier, J.; Schulze, V.
2016. Materials research proceedings, 175–180. doi:10.21741/9781945291173-30
Development of Functionally Graded Tungsten/EUROFER Coating System for First Wall Application.
Qu, D. D.; Basuki, W. W.; Gibmeier, J.; Vaßen, R.; Aktaa, J.
2015. Fusion science and technology, 68 (3), 578–581. doi:10.13182/FST15-113
Finite Element Modeling for the Structural Analysis of Al-Cu Laser Beam Welding.
Hartel, U.; Ilin, A.; Bantel, C.; Gibmeier, J.; Michailov, V.
2016. Physics procedia, 83, 1404–1414. doi:10.1016/j.phpro.2016.08.147
Local Residual Stress Depth Distribution in the Inner Gearing of a Case Hardened Sliding Collar.
Rebelo-Kornmeier, J.; Gibmeier, J.; Strauss, T.
2017. Thermec 2016. International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, Graz, Austria , May 29 - June 3, 2016, 601–606, Trans Tech Publications, Zürich. doi:10.4028/www.scientific.net/MSF.879.601
Effect of multiple passes treatment in waterjet peening on fatigue performance.
Azharia, A.; Schindler, C.; Godard, C.; Gibmeier, J.; Kerscher, E.
2016. Applied surface science, Volume 388, Part A, 468–474. doi:10.1016/j.apsusc.2015.11.195
Einfluss von LTT-Decklagen auf die Mikrostruktur- und Härteentwicklung von Mehr­­lagen­schweißungen.
Walter, V.; Ohl, H.; Vollert, F.; Dixneit, J.; Gibmeier, J.
2016. Praktische Metallographie Sonderband
In-situ load analysis in multi-run welding using LTT filler materials.
Dixneit, J.; Kromm, A.; Hannemann, A.; Friedersdorf, P.; Kannengiesser, T.; Gibmeier, J.
2016. Welding in the world, 60 (6), 1159–1168. doi:10.1007/s40194-016-0373-1
Spatially resolved temporal stress evolution during laser surface spot hardening of steel.
Kostov, V.; Gibmeier, J.; Wanner, A.
2017. Journal of materials processing technology, 239, 326–335. doi:10.1016/j.jmatprotec.2016.08.035
Stress formation within the first layer in plasma sprayed coatings.
Mutter, M.; Mauer, G.; Mücke, R.; Vaßen, R.; Back, H. C.; Gibmeier, J.
2015. International Thermal Spray Conference & Exposition (ITSC 2015) : Long Beach, California, USA, 11 - 14 May 2015. Vol. 2. Ed.: A. Agarwal, 669–672, Curran, Red Hook (NY)
Investigations on the Initial Stress Evolution During Atmospheric Plasma Spraying of YSZ by In Situ Curvature Measurement.
Mutter, M.; Mauer, G.; Mücke, R.; Vaßen, R.; Back, H. C.; Gibmeier, J.
2016. Journal of Thermal Spray Technology, 25 (4), 672–683. doi:10.1007/s11666-016-0398-4
Stereologische Analyse der Mikrostruktur von sinterreaktionsgebundenen Si3N4 Mikroproben.
Maisenbacher, J.; Ohl, A.; Müller, M.; Rögner, J.; Gibmeier, J.
2015. Praktische Metallographie / Sonderbände, 47, 251–256
Grating Based Differential Phase Contrast Imaging of an Interpenetrating AlSi12/Al2O3 Metal Matrix Composite.
Maisenbacher, J.; Prade, F.; Gibmeier, J.; Pfeiffer, F.
2015. Proceedings. ICTMS 2015, 2nd International Conference on Tomography of Materials and Structures, June 29th – July 3rd, 2015, Québec, Canada, 83, INRS-ETE, Québec
Stress formation within the first layer in plasma sprayed coatings.
Mutter, M.; Mauer, G.; Mücke, R.; Vassen, R.; Back, H. C.; Gibmeier, J.
2015. Thermal Spray 2015: Proceedings from the International Thermal Spray Conference, May 11–14, 2015, Long Beach, California, USA, 669–672
Fatigue Performance of Medical Ti6Al4V Alloy after Mechanical Surface Treatments.
Sonntag, R.; Reinders, J.; Gibmeier, J.; Kretzer, J. P.
2015. PLoS one, 10 (3), Art.Nr. e0121963. doi:10.1371/journal.pone.0121963
Time-Resolved X-Ray Diffraction Stress Analysis during Laser Surface Hardening of Steel - Impact of the maximum process temperature.
Kostov, V.; Gibmeier, J.; Wanner, A.
2014. HTM - journal of heat treatment and materials, 69 (6), 360–367. doi:10.3139/105.110241
Locally resolved stress and strain analysis of sinter-joined micro valves using synchrotron X-ray diffraction and conical slit apertures.
Maisenbacher, J.; Gibmeier, J.; Klimscha, K.; Fischer, T.; Staron, P.
2015. Microsystem technologies, 21 (8), 1787–1795. doi:10.1007/s00542-014-2285-6
Detaillierte Mikrostrukturanalyse stark verformter ferritisch-perlitischer Gefüge.
Kümmel, J.; Ohl, A.; Müller, E.; Schneider, R.; Gibmeier, J.
2014. Fortschritte in der Metallographie - Berichte der 14. Internationalen Metallographie-Tagung, Leoben, Österreich, 17.-19. September 2014, 95–100, Werkstoff-Informationsgesellschaft, Frankfurt
Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation.
Kümmel, J.; Braun, D.; Gibmeier, J.; Schneider, J.; Greiner, C.; Schulze, V.; Wanner, A.
2015. Journal of Materials Processing Technology, 215, 62–70. doi:10.1016/j.jmatprotec.2014.07.032
Effect of built-up edge formation on residual stresses induced by dry cutting of normalized steel.
Kümmel, J.; Gibmeier, J.; Schulze, V.; Wanner, A.
2014. Advanced materials research, 996, 603–608. doi:10.4028/www.scientific.net/AMR.996.603
Effect of preloading on local residual stresses induced by laser surface hardening of steel.
Kostov, V.; Gibmeier, J.; Lichtenberg, K.; Wanner, A.
2014. Advanced materials research, 996, 562–567. doi:10.4028/www.scientific.net/AMR.996.562
Incremental hole-drilling method vs. thin components: A simple correction approach.
Held, E.; Schuster, S.; Gibmeier, J.
2014. Advanced materials research, 996, 283–288. doi:10.4028/www.scientific.net/AMR.996.283
Real time monitoring of phase transformation and strain evolution in LTT weld filler material using EDXRD.
Gibmeier, J.; Held, E.; Altenkirch, J.; Kromm, A.; Kannengiesser, T.; Buslaps, T.
2014. Journal of Materials Processing Technology, 214 (11), 2739–2747. doi:10.1016/j.jmatprotec.2014.06.008
Metal-ceramic-composite casting of complex micro components.
Buqezi-Ahmeti, D.; Maisenbacher, J.; Gibmeier, J.; Hanemann, T.
2013. Microsystem Technologies, 19 (2), 159–165. doi:10.1007/s00542-012-1624-8
Fatigue strengthening of an orthopedic Ti6Al4V alloy: what is the potential of a final shot peening process?.
Sonntag, R.; Reinders, J.; Gibmeier, J.; Kretzer, J. P.
2013. Biomaterials and Medical Tribology. Ed.: J Paulo Davim, Kapitel 4, Woodhead Publishing, Cambridge
Numerical study of internal load transfer in metal/ceramic composites based on freeze-cast ceramic preforms and experimental validation.
Sinchuk, Y.; Roy, S.; Gibmeier, J.; Piat, R.; Wanner, A.
2013. Materials Science and Engineering A, 585, 10–16. doi:10.1016/j.msea.2013.07.022
Ortsaufgelöste Eigenspannungsanalyse an Mikroverbundgussproben.
Maisenbacher, J.; Buqezi-Ahmeti, D.; Gibmeier, J.; Donges, J.; Hanemann, T.
2013. 6. Kolloquium Mikroproduktion : Braunschweig 8. Oktober 2013 / [IPROM]. Hrsg.: R. Tutsch, B12, Shaker, Aachen
Residual stress analysis of thick film systems by the incremental hole-drilling method.
Held, E.; Gibmeier, J.
2014. HTM - journal of heat treatment and materials, 69 (2), 71–79. doi:10.3139/105.110216
X-ray tensor tomography.
Malecki, A.; Potdevin, G.; Biernath, T.; Eggl, E.; Willer, K.; Lasser, T.; Maisenbacher, J.; Gibmeier, J.; Wanner, A.; Pfeiffer, F.
2014. epl, 105 (3), 38002. doi:10.1209/0295-5075/105/38002
Optimization of a multi-channel parabolic guide for the material science diffractometer STRESS-SPEC at FRM II.
Kornmeier, J. R.; Ostermann, A.; Hofmann, M.; Gibmeier, J.
2014. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 736, 150–155. doi:10.1016/j.nima.2013.10.058
Laser surface hardening of steel: Effect of process atmosphere on the microstructure and residual stresses.
Kostov, V.; Gibmeier, J.; Wanner, A.
2014. 6th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, MECA SENS VI 2011; Hamburg; Germany; 7 September 2011 - 9 September 2011. Ed.: H.G. Brokmeier, 149–153, Trans Tech Publications, Durnten. doi:10.4028/www.scientific.net/MSF.772.149
Load partitioning study in a 3D interpenetrating AlSi12/Al2O3 metal/ceramic composite.
Roy, S.; Gibmeier, J.; Kostov, V.; Weidenmann, K. A.; Nagel, A.; Wanner, A.
2014. Mechanical stress evaluation by neutrons and synchrotron radiation VI : selected, peer reviewed papers from the 6th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS VI 2011), September 7-9, 2011, Hamburg, Germany. Ed.: H.G. Brokmeier, 103–107, Trans Tech Publications, Durnten. doi:10.4028/www.scientific.net/MSF.772.103
Residual stress in steel fusion welds joined using low transformation temperature (LTT) filler material.
Gibmeier, J.; Obelode, E.; Altenkirch, J.; Kromm, A.; Kannengießer, T.
2014. International Conference on Residual Stresses 9 (ICRS 9) : selected, peer reviewed papers from the 9th International Conference on residual Stresses (ICRS 9), October 7-9, 2012, Garmisch-Partenkirchen, Germany. Ed.: S.J.B Kurz, 620–627, Trans Tech Publ., Durnten-Zurich. doi:10.4028/www.scientific.net/MSF.768-769.620
Neutron residual strain surface scans - Experimental results and Monte Carlo simulations.
Kornmeier, J. R.; Saroun, J.; Gibmeier, J.; Hofmann, M.
2014. International Conference on Residual Stresses 9 (ICRS 9) : selected, peer reviewed papers from the 9th International Conference on residual Stresses (ICRS 9), October 7-9, 2012, Garmisch-Partenkirchen, Germany. Ed.: S.J.B Kurz, 52–59, Trans Tech Publications Inc., Dürnten. doi:10.4028/www.scientific.net/MSF.768-769.52
Effect of built-up edges and transfer layers on the wear state during dry cutting of steel with cemented carbide tools.
Kümmel, J.; Gibmeier, J.; Müller, E.; Schneider, R.; Schulze, V.; Wanner, A.
2013. Proceedings. WTC V. 5th World Tribology Congress, Torino, September 8-13, 2013
High Speed Broaching of Case Hardening Steel SAE 5120.
Schulze, V.; Meier, H.; Strauss, T.; Gibmeier, J.
2012. Procedia CIRP, 1 (2012), 431–436. doi:10.1016/j.procir.2012.04.077
Mechanical properties of innovative metal/ceramic composites based on freeze-cast ceramic preforms.
Siddhartha, R.; Gibmeier, J.; Weidenmann, K. A.; Wanner, A.
2012. Materials Challenges and Testing for Supply of Energy and Resources. Ed.: T. Böllinghaus, 213–220, Springer, Berlin. doi:10.1007/978-3-642-23348-7_19
In-situ-Analyse der Phasenumwandlungskinetik während des Schweißens.
Kannengießer, T.; Kromm, A.; Gibmeier, J.; Rehtmeier, M.
2010. Materials Testing, 52 (4), 204–210. doi:10.3139/120.110122
Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure.
Roy, S.; Gibmeier, J.; Kostov, V.; Weidenmann, K. A.; Nagel, A.; Wanner, A.
2011. Acta Materialia, 59 (4), 1424–1435. doi:10.1016/j.actamat.2010.11.004
Metallographische Charakterisierung metallischer Gläser.
Rögner, J.; Ohl, A.; Gibmeier, J.; Schulze, V.; Kerscher, E.
2011. Fortschritte in der Metallographie. Vortragstexte der 45. Metallographie-Tagung, Karlsruhe, 14.-16. September 2011. Hrsg.: A. Wanner, 37–42, Deutsche Gesellschaft für Materialkunde, Frankfurt (Main)
Minimization of spurious strains by using a Si bent-perfect-crystal monochromator: neutron surface strain scanning of a shot-peened sample.
Rebelo-Kornmeier, J.; Gibmeier, J.; Hofmann, M.
2011. Measurement Science and Technology, 22 (6), 065705/1–9. doi:10.1088/0957-0233/22/6/065705
EDXRD for real time observation of a gas tungsten arc welding process.
Altenkirch, J.; Gibmeier, J.; Buslaps, T.; Honkimäki, V.
2011. Materials Science Forum, 706-709, 1655–1660. doi:10.4028/www.scientific.net/MSF.706-709.1655
Time- and temperature-resolved synchrotron X-ray diffraction: observation of phase transformation and strain evolution in novel low temperature transformation weld filler materials.
Altenkirch, J.; Gibmeier, J.; Kostov, V.; Kromm, A.; Kannengiesser, T.; Doyle, S.; Wanner, A.
2011. The journal of strain analysis for engineering design, 46 (7), 563–579. doi:10.1177/0309324711413190
Internal load transfer and damage evolution in a 3D interpenetrating metal/ceramic composite.
Roy, S.; Gibmeier, J.; Kostov, V.; Weidenmann, K. A.; Nagel, A.; Wanner, A.
2012. Materials Science and Engineering A, 551, 272–279. doi:10.1016/j.msea.2012.05.016
Fast in situ phase and stress analysis during laser surface treatment: A synchrotron x-ray diffraction approach.
Kostov, V.; Gibmeier, J.; Wilde, F.; Staron, P.; Rössler, R.; Wanner, A.
2012. AIP Review of Scientific Instruments, 83 (11), 115101/1–11. doi:10.1063/1.4764532
Local residual stress distribution at the tooth root surface of a broached steel component.
Strauß, T.; Meier, H.; Gibmeier, J.; Schulze, V.; Wanner, A.
2012. Materials Science Forum, 706-709 (2012), 1731–1736. doi:10.4028/www.scientific.net/MSF.706-709.1731
Inelastic behavior of the single domain of metal-ceramic composites with lamellar microstructure.
Sinchuk, Y.; Piat, R.; Roy, S.; Gibmeier, J.; Wanner, A.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 285–286. doi:10.1002/pamm.201110134
In situ study of structural integrity of low transformation temperature (LTT)-welds.
Altenkirch, J.; Gibmeier, J.; Kromm, A.; Kannengiesser, T.; Nitschke-Pagel, T.; Hofmann, M.
2011. Materials Science and Engineering: A, 528 (16 - 17), 5566–5575. doi:10.1016/j.msea.2011.03.091
Local analysis of process induced residual stress distributions for complex geometries - example: internal gearing of a gearshift sleeve.
Strauß, T.; Gibmeier, J.; Wanner, A.
2012. Proceedings of the Summer School 2011. Graduate School 1483. Process Chains in Production: Interaction, Modelling and Assessment of Process Zones. Ed.: R. Pabst, 33–36, KIT Scientific Publishing, Karlsruhe