heilmaier

Prof. Dr.-Ing. Martin Heilmaier

  • Karlsruher Institut für Technologie (KIT)
    Institut für Angewandte Materialien - Werkstoffkunde (IAM-WK)
    Campus Süd
    Engelbert-Arnold-Straße 4
    76131 Karlsruhe

    Gebäude 10.91

     

Topics

  • Mechanical behavior of metallic materials under monotonic and cyclic loading conditions

  • Strengthening and creep mechanisms in metallic materials and intermetallic compounds

  • Plasticity and strength of nanocrystalline and amorphous metals

  • Alloy development and characterisation of oxidation resistant, high strength refractory silicide alloys

  • Directional solidification of high temperature structural materials

  • Powder metallurgical manufacturing of nanocluster steels and Al-alloys

Curriculum Vitae

since 11/2011 Full Professor, Chair Materials Science & Engineering at the Institute for Applied Materials (IAM), Karlsruhe Institute of Technology (KIT)
06/2010 - 11/2011 Vice President responsible for research and the promotion of early career scientists, including postdoctoral fellows and assistant professors, TU Darmstadt, Germany
11/2008 - 11/2011 Full Professor, Chair Physical Metallurgy, TU Darmstadt, Germany
2006 - 2008 Vice President responsible for academic affairs, Otto-von-Guericke-University Magdeburg
2005 - 2006 Vice-Dean for academic affairs of the Department of Mechanical Engineering, Otto-von-Guericke-University Magdeburg
10/2002 - 10/2008 Full Professor, Chair of Materials Testing at the Institute for Materials & Joining Technology, Otto-von-Guericke-University Magdeburg, Germany. Head of the Institute between 2005 and 2008
2001 - 2002 Team Leader Research & Development of Refractory metals, Technology Center, Plansee SE, Reutte/Tyrolia, Austria
1994 - 2001 Head of Research Group “Mechanical Properties” at the Institute for Metallic Materials, Institute for Solid State and Materials Research Dresden (IFW Dresden), Germany
1988 - 1994 Research Assistant at the Chair "Allgemeine Werkstoffeigenschaften", Institut for Materials Science, Universität Erlangen-Nürnberg, Germany, Dr.-Ing. (1992) on "Creep and Creep Rupture Behaviour of ODS Nickelbase Superalloys" (equivalent to PhD)
1981 - 1987 Study of Materials Science at the Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; final degree “Diplom-Ingenieur” (equivalent to Master of Science)
16.02.1962 born in Erlangen, Germany
  married, 4 children

Awards and Reviewing

  • Georg-Sachs-Preis 1999, Deutsche Gesellschaft für Materialkunde, Frankfurt
  • Preis des Fachschaftsrates Maschinenbau der Otto-von-Guericke Universität Magdeburg for best education summer term 2005, winter term 2005/2006, summer term 2006 and summer term SS 2007
  • Key reader and member of the Board of Review of Metall. Mater. Trans. A since 2005
  • member of the Apparateausschusses of the Deutsche Forschungsgemeinschaft since 2010
  • Reviewing for Deutsche Forschungsgemeinschaft, Alexander-von-Humboldt-Stiftung, National Science Foundation (USA)

Scientific societies and committee activities

  • Deutsche Gesellschaft für Materialkunde, Frankfurt:
    • 4/1999-9/2002 head of the team ''Mechanisches Werkstoffverhalten bei hoher Temperatur''
    • since 2006 member of the Preiskuratoriums II, since 2011 head of the PK II
    • 2007 - 2010 head of DGM Ausbildungsausschusses
    • since 2007 co-opted member of the board Vorstandes
  • The Minerals, Metals & Materials Society (TMS), Warrendale, Pennsylvania
  • Materials Research Society (MRS, Warrendale, Pennsylvania
  • symposium organizer Materials Week 2002, Werkstoffwoche 2004, München
  • symposium organizer ''Plasticity of Emerging Materials for Structural Applications at Ultra-High  Temperatures'', Plasticity 2008, Hawai
  • symposium organizer MSE 2008, Nürnberg
  • National Organizing Committee of ICSMA 15, Dresden, August 2009

Scientific work abroad

04/1998 - 03/1999 "Visiting Academic" as a postdoctoral fellow of the Feodor-Lynen program of the Alexander von Humboldt-Stiftung at the Department of Mechanical and Materials Engineering (Prof. J. Estrin), University of Western Australia, Perth, Australia
07/2000 - 10/2000 "Visiting Professor" at the Department of Chemical Engineering and Materials Science (Prof. J.C. Gibeling), University of California Davis, California
07/2004 - 08/2004 "Visiting Professor" at the Department of Mechanical Engineering (Prof. R. A. Varin), University of Waterloo, Ontario, Canada
11/2007 Fellow of the Japan Society for the Promotion of Science: "FY2007 JSPS Invitation Fellowship Program for Research in Japan (Short Term)"
08/2014 "Visiting Professor" at the Department of Chemical Engineering, Materials Science and Biomedical Engineering (Prof. J.C. Earthman), University of California Irvine, California

Publications


2024
Strength of Disordered and Ordered Al‐containing Refractory High Entropy Alloys
Laube, S.; Winkens, G.; Kauffmann, A.; Li, J.; Kirchlechner, C.; Heilmaier, M.
2024. Advanced Engineering Materials. doi:10.1002/adem.202301797
Unveiling the Intricacies of a Ductile‐Phase Toughened Intermetallic: An In‐depth Exploration of a Eutectic Mo‐Si‐Ti Alloy and its Mechanical Behavior
Vikram, R. J.; Aramanda, S. K.; Schliephake, D.; Kauffmann, A.; Choudhury, A.; Heilmaier, M.; Suwas, S.
2024. Advanced Engineering Materials. doi:10.1002/adem.202301843
Unique Yttria Nanoparticle Strengthening in an Inconel 718 Superalloy Fabricated by Additive Manufacturing
Dai, S.; Zhu, J.; Yan, X.; Wu, S.; Liu, Y.; Gao, X.; Fraser, H.; Hodgson, P.; Zhu, Y.; Heilmaier, M.; Huang, A.
2024. Advanced Materials Technologies, 9 (3), Art.-Nr.: 2301421. doi:10.1002/admt.202301421
Aluminide diffusion coatings for improving the pesting behavior of refractory metals
Beck, K.; Ulrich, A. S.; Czerny, A. K.; White, E. M. H.; Heilmaier, M.; Galetz, M. C.
2024. Surface and Coatings Technology, 476, Art.-Nr.: 130205. doi:10.1016/j.surfcoat.2023.130205
On the inherent strength of Cr23C6 with the complex face-centered cubic D84 structure
Kishida, K.; Ito, M.; Inui, H.; Heilmaier, M.; Eggeler, G.
2024. Acta Materialia, 263, Art.-Nr.: 119518. doi:10.1016/j.actamat.2023.119518
2023
Influence of the oxidation on the optical properties of Mo-Si-Ti, Ta-Mo-Cr-Al and Ta-Mo-Cr-Ti-Al alloys
Charpentier, L.; Kauffmann, A.; Bêche, E.; Escape, C.; Laube, S.; Schliephake, D.; Esvan, J.; Gorr, B.; Soum-Glaude, A.; Heilmaier, M.
2023. Materials Today Communications, 37, Art.-Nr.: 107056. doi:10.1016/j.mtcomm.2023.107056
Plastic deformation of single crystals of the equiatomic Cr-Fe-Co-Ni medium entropy alloy – A comparison with Cr-Mn-Fe-Co-Ni and Cr-Co-Ni alloys
Li, L.; Chen, Z.; Yuge, K.; Kishida, K.; Inui, H.; Heilmaier, M.; George, E. P.
2023. International Journal of Plasticity, 169, Art.-Nr.: 103732. doi:10.1016/j.ijplas.2023.103732
The effect of carbides on the creep performance of Hastelloy X fabricated by laser powder bed fusion
Wu, S.; Dai, S. B.; Heilmaier, M.; Peng, H. Z.; Zhang, G. H.; Huang, S.; Zhang, X. J.; Tian, Y.; Zhu, Y. M.; Huang, A. J.
2023. Materials Science and Engineering: A, 875, Arktl.Nr.: 145116. doi:10.1016/j.msea.2023.145116
Temporal sequence of deformation twinning in CoCrNi under tribological load
Dollmann, A.; Rau, J. S.; Bieber, B.; Mantha, L.; Kübel, C.; Kauffmann, A.; Tirunilai, A. S.; Heilmaier, M.; Greiner, C.
2023. Scripta Materialia, 229, Art.-Nr.: 115378. doi:10.1016/j.scriptamat.2023.115378
Formation of rutile (Cr,Ta,Ti)O₂ oxides during oxidation of refractory high entropy alloys in Ta-Mo-Cr-Ti-Al system
Schellert, S.; Weber, M.; Christ, H. J.; Wiktor, C.; Butz, B.; Galetz, M. C.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Gorr, B.
2023. Corrosion Science, 211, Art.Nr. 110885. doi:10.1016/j.corsci.2022.110885
Revisiting analytic shear-lag models for predicting creep in composite materials
Dyck, A.; Wicht, D.; Kauffmann, A.; Heilmaier, M.; Böhlke, T.
2023. Scripta Materialia, 224, Article no: 115142. doi:10.1016/j.scriptamat.2022.115142
Softening by spinodal decomposition in Au–Cu–Ni–Pd–Pt high-entropy alloys
Drescher, S.; Seils, S.; Pohl, D.; Rellinghaus, B.; Kauffmann, A.; Heilmaier, M.; Freudenberger, J.
2023. Materials Science and Engineering: A, 887, Art.-Nr.: 145772. doi:10.1016/j.msea.2023.145772
Chromium Diffusion Coatings for Mo-Based Silicides to Improve Their Oxidation Resistance
Beck, K.; Hinrichs, F.; Oskay, C.; Ulrich, A. S.; Heilmaier, M.; Galetz, M. C.
2023. Coatings, 13 (10), 1712. doi:10.3390/coatings13101712
Phase-Field Simulation of the Microstructure Evolution in the Eutectic Alloy NiAl-31Cr-3Mo
Kellner, M.; Schulz, C.; Kauffmann, A.; Heilmaier, M.; Nestler, B.
2023. Crystals, 13 (7), Article no: 1046. doi:10.3390/cryst13071046
Microstructure and mechanical properties of a precipitation‐strengthened Fe‐Al‐Nb alloy
Nizamoglu, S.; Gedsun, A.; Kauffmann, A.; Ghosh, M.; Michels, H.; Groten, T.; Schulz, C.; Breuner, C.; Seils, S.; Schliephake, D.; Laube, S.; Palm, M.; Heilmaier, M.
2023. Advanced Engineering Materials. doi:10.1002/adem.202300148
The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys
Winkens, G.; Kauffmann, A.; Herrmann, J.; Czerny, A. K.; Obert, S.; Seils, S.; Boll, T.; Baruffi, C.; Rao, Y.; Curtin, W. A.; Schwaiger, R.; Heilmaier, M.
2023. Communications Materials, 4 (1), 26. doi:10.1038/s43246-023-00353-8
The Piezoresponse in WO₃ Thin Films Due to N₂-Filled Nanovoids Enrichment by Atom Probe Tomography
Pineda-Domínguez, P. M.; Boll, T.; Nogan, J.; Heilmaier, M.; Hurtado-Macías, A.; Ramos, M.
2023. Materials, 16 (4), Art.-Nr.: 1387. doi:10.3390/ma16041387
Nanoscale oxide formation at α‐Al₂O₃–Nb interfaces
Eusterholz, M. K.; Boll, T.; Ott, V.; Stüber, M.; Lu, Y.; Gebauer, J.; Ulrich, S.; Kauffmann, A.; Heilmaier, M.
2023. Advanced Engineering Materials, 25 (14), Art.-Nr.: 2201441. doi:10.1002/adem.202201441
2022
Solid solution strengthening in medium- to high-entropy alloys
Freudenberger, J.; Thiel, F.; Utt, D.; Albe, K.; Kauffmann, A.; Seils, S.; Heilmaier, M.
2022. Materials Science and Engineering: A, 861, 144271. doi:10.1016/j.msea.2022.144271
Phase continuity, brittle to ductile transition temperature and creep behavior of a eutectic Mo‐20Si‐52.8Ti alloy
Tirunilai, A. S.; Hinrichs, F.; Schliephake, D.; Engstler, M.; Mücklich, F.; Obert, S.; Winkens, G.; Kauffmann, A.; Heilmaier, M.
2022. Advanced Engineering Materials, 24 (11), Art.Nr. 2200918. doi:10.1002/adem.202200918
Improving the intermediate- and high-temperature strength of L1-Co(Al,W) by Ni and Ta additions
Chen, Z.; Kishida, K.; Inui, H.; Heilmaier, M.; Glatzel, U.; Eggeler, G.
2022. Acta Materialia, 238, Art.-Nr.: 118224. doi:10.1016/j.actamat.2022.118224
A novel nitridation- and pesting-resistant Cr-Si-Mo alloy
Hinrichs, F.; Kauffmann, A.; Tirunilai, A. S.; Schliephake, D.; Beichert, B.; Winkens, G.; Beck, K.; Ulrich, A. S.; Galetz, M. C.; Long, Z.; Thota, H.; Eggeler, Y.; Pundt, A.; Heilmaier, M.
2022. Corrosion Science, 207, Art.-Nr.: 110566. doi:10.1016/j.corsci.2022.110566
Effect of heat treatment on the electrical and mechanical properties of a Cu–Ni–Si cast alloy
Atapek, Ş. H.; von Klinski-Wetzel, K.; Heilmaier, M.
2022. Materialpruefung/Materials Testing, 64 (8), 1103–1111. doi:10.1515/mt-2022-0022
Interface reactions of magnetron sputtered Si-based dual layer coating systems as oxidation protection for Mo-Si-Ti alloys
Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Schulz, U.
2022. Surface and Coatings Technology, 444, 128620. doi:10.1016/j.surfcoat.2022.128620
Plastic deformation of bulk and micropillar single crystals of Mo₅Si₃ with the tetragonal D8 structure
Kishida, K.; Chen, Z.; Matsunoshita, H.; Maruyama, T.; Fukuyama, T.; Sasai, Y.; Inui, H.; Heilmaier, M.
2022. International Journal of Plasticity, 155, Art.-Nr. 103339. doi:10.1016/j.ijplas.2022.103339
On the formation of nanocrystalline aluminides during high pressure torsion of Al/Ni alternating foils and post-processing multilayer reaction
Ivanisenko, Y.; Mazilkin, A.; Gallino, I.; Riegler, S. S.; Doyle, S.; Kilmametov, A.; Fabrichnaya, O.; Heilmaier, M.
2022. Journal of alloys and compounds, 905, Art. Nr.: 164201. doi:10.1016/j.jallcom.2022.164201
On the impact of the mesostructure on the creep response of cellular NiAl-Mo eutectics
Wicht, D.; Kauffmann, A.; Schneider, M.; Heilmaier, M.; Böhlke, T.
2022. Acta materialia, 226, Art.-Nr. 117626. doi:10.1016/j.actamat.2022.117626
Micro-mechanical deformation behavior of CoCrFeMnNi high-entropy alloy
Lu, K.; Chauhan, A.; Litvinov, D.; Tirunilai, A. S.; Freudenberger, J.; Kauffmann, A.; Heilmaier, M.; Aktaa, J.
2022. Journal of materials science & technology, 100, 237–245. doi:10.1016/j.jmst.2021.04.079
Materials properties characterization in the most extreme environments
Schreiber, D. K.; Schwaiger, R.; Heilmaier, M.; McCormack, S. J.
2022. MRS Bulletin, 47 (11), 1128–1142. doi:10.1557/s43577-022-00441-z
Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Laube, S.; Kauffmann, A.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y. M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2022. Science and Technology of Advanced Materials, 23 (1), 692–706. doi:10.1080/14686996.2022.2132118
Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios
Dollmann, A.; Kauffmann, A.; Heilmaier, M.; Srinivasan Tirunilai, A.; Mantha, L. S.; Kübel, C.; Eder, S. J.; Schneider, J.; Greiner, C.
2022. Journal of Materials Science, 57, 17448–17461. doi:10.1007/s10853-022-07661-3
Coarse‐Grained Refractory Composite Castables Based on Alumina and Niobium
Zienert, T.; Endler, D.; Hubálková, J.; Gehre, P.; Eusterholz, M.; Boll, T.; Heilmaier, M.; Günay, G.; Weidner, A.; Biermann, H.; Kraft, B.; Wagner, S.; Aneziris, C. G.
2022. Advanced Engineering Materials, 24 (8), Art.-Nr.: 2200296. doi:10.1002/adem.202200296
Simultaneous Twinning and Microband-Induced Plasticity of a Compositionally Complex Alloy with Interstitial Carbon at Cryogenic Temperatures
Tirunilai, A. S.; Osmundsen, R.; Baker, I.; Chen, H.; Weiss, K.-P.; Heilmaier, M.; Kauffmann, A.
2022. High Entropy Alloys & Materials. doi:10.1007/s44210-022-00001-9
High‐temperature ternary oxide phases in Ta/Nb‐Alumina composite materials
Eusterholz, M. K.; Boll, T.; Gebauer, J.; Weidner, A.; Kauffmann, A.; Franke, P.; Seifert, H.-J.; Biermann, H.; Aneziris, C.; Heilmaier, M.
2022. Advanced Engineering Materials, 24 (8), Art.-Nr.: 2200161. doi:10.1002/adem.202200161
Role of orientation relationship for the formation of morphology and preferred orientation in NiAl-(Cr,Mo) during directional solidification
Schulz, C.; Kauffmann, A.; Laube, S.; Kellner, M.; Nestler, B.; Heilmaier, M.
2022. Acta Materialia, 231, Art.Nr. 117857. doi:10.1016/j.actamat.2022.117857
Revealing the Role of Cross Slip for Serrated Plastic Deformation in Concentrated Solid Solutions at Cryogenic Temperatures
Tirunilai, A. S.; Weiss, K.-P.; Freudenberger, J.; Heilmaier, M.; Kauffmann, A.
2022. Metals, 12 (3), 514. doi:10.3390/met12030514
Correction to: The electronic states of ITO–MoS: Experiment and theory
López‑Galán, O. A.; Ramos, M.; Nogan, J.; Ávila‑García, A.; Boll, T.; Heilmaier, M.
2022. MRS communications, 12 (2), 283–283. doi:10.1557/s43579-022-00151-2
The electronic states of ITO–MoS₂: Experiment and theory
López-Galán, O. A.; Ramos, M.; Nogan, J.; Ávila-García, A.; Boll, T.; Heilmaier, M.
2022. MRS communications, 12, 137–144. doi:10.1557/s43579-021-00126-9
2021
Grain boundary engineering and its implications on corrosion behaviour of equiatomic CoCrFeMnNi high entropy alloy
Thota, H.; Jeyaraam, R.; Bairi, L. R.; Tirunilai, A. S.; Kauffmann, A.; Freudenberger, J.; Heilmaier, M.; Mandal, S.; Vadlamani, S. S.
2021. Journal of alloys and compounds, 888, Art.-Nr.: 161500. doi:10.1016/j.jallcom.2021.161500
Development of actual powder layer height depending on nominal layer thicknesses and selection of laser parameters
Jansen, D.; Hanemann, T.; Radek, M.; Rota, A.; Schröpfer, J.; Heilmaier, M.
2021. Journal of materials processing technology, 298, Art.-Nr.: 117305. doi:10.1016/j.jmatprotec.2021.117305
Microstructure and mechanical properties of high-Mn-ODS steels
Seils, S.; Kauffmann, A.; Delis, W.; Boll, T.; Heilmaier, M.
2021. Materials science and engineering / A, 825, Art.-Nr. 141859. doi:10.1016/j.msea.2021.141859
Oxidation mechanism of refractory high entropy alloys Ta-Mo-Cr-Ti-Al with varying Ta content
Schellert, S.; Gorr, B.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Christ, H. J.
2021. Corrosion science, 192, Article no: 109861. doi:10.1016/j.corsci.2021.109861
Quantitative Phase Prediction in Dual-Phase High-Entropy Alloys: Computationally Aided Parametric Approach
Singh Negi, A.; Sourav, A.; Heilmaier, M.; Biswas, S.; Thangaraju, S.
2021. Physica Status Solidi (B) Basic Research, 258 (6), Art. Nr.: 2100106. doi:10.1002/pssb.202100106
Microcantilever Fracture Tests on Eutectic NiAl‐Cr(Mo) in‐situ Composites
Gabel, S.; Giese, S.; Merle, B.; Sprenger, I.; Heilmaier, M.; Neumeier, S.; Bitzek, E.; Göken, M.
2021. Advanced engineering materials, 23 (6), Art.-Nr. 202001464. doi:10.1002/adem.202001464
Oxidation Resistance, Creep Strength and Room-Temperature Fracture Toughness of Mo–28Ti–14Si–6C–6B Alloy
Hatakeyama, T.; Kauffmann, A.; Obert, S.; Gombola, C.; Heilmaier, M.; Yoshimi, K.
2021. Materialia, 16, Art.Nr. 101108. doi:10.1016/j.mtla.2021.101108
Mo-Silicide Alloys for High-Temperature Structural Applications
Perepezko, J. H.; Krüger, M.; Heilmaier, M.
2021. Materials Performance and Characterization, 10 (2), Article: 20200183. doi:10.1520/MPC20200183
Flexible Powder Production for Additive Manufacturing of Refractory Metal-Based Alloys
Hinrichs, F.; Kauffmann, A.; Schliephake, D.; Seils, S.; Obert, S.; Ratschbacher, K.; Allen, M.; Pundt, A.; Heilmaier, M.
2021. Metals, 11 (11), Article no: 1723. doi:10.3390/met11111723
Microstructure tailoring of Al-containing compositionally complex alloys by controlling the sequence of precipitation and ordering
Laube, S.; Schellert, S.; Srinivasan Tirunilai, A.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Acta Materialia, 218, Article no: 117217. doi:10.1016/j.actamat.2021.117217
Influence of Shot Peening on the Isothermal Fatigue Behavior of the Gamma Titanium Aluminide Ti-48Al-2Cr-2Nb at 750 °C
Breuner, C.; Guth, S.; Gall, E.; Swadźba, R.; Gibmeier, J.; Heilmaier, M.
2021. Metals, 11 (7), Art.-Nr.: 1083. doi:10.3390/met11071083
The Effect of Al on the Formation of a CrTaO₄ Layer in Refractory High Entropy Alloys Ta-Mo-Cr-Ti-xAl
Schellert, S.; Gorr, B.; Christ, H.-J.; Pritzel, C.; Laube, S.; Kauffmann, A.; Heilmaier, M.
2021. Oxidation of metals, 96, 333–345. doi:10.1007/s11085-021-10046-7
Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading
Lu, K.; Chauhan, A.; Tirunilai, A. S.; Freudenberger, J.; Kauffmann, A.; Heilmaier, M.; Aktaa, J.
2021. Acta materialia, 215, Art.-Nr.: 117089. doi:10.1016/j.actamat.2021.117089
Current Status of Research on the Oxidation Behavior of Refractory High Entropy Alloys
Gorr, B.; Schellert, S.; Müller, F.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Advanced engineering materials, 23 (5), Art.-Nr.: 2001047. doi:10.1002/adem.202001047
Influence of Temperature and Plastic Strain on Deformation Mechanisms and Kink Band Formation in Homogenized HfNbTaTiZr
Chen, H.; Hanemann, T.; Seils, S.; Schliephake, D.; Tirunilai, A. S.; Heilmaier, M.; Weiss, K.-P.; Kauffmann, A.
2021. Crystals, 11 (2), 81. doi:10.3390/cryst11020081
The Creep and Oxidation Behaviour of Pesting-Resistant -Containing Eutectic-Eutectoid Mo-Si-Ti Alloys
Obert, S.; Kauffmann, A.; Pretzler, R.; Schliephake, D.; Hinrichs, F.; Heilmaier, M.
2021. Metals, 11 (1), Art.-Nr.: 169. doi:10.3390/met11010169
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi
Lu, K.; Chauhan, A.; Walter, M.; Tirunilai, A. S.; Schneider, M.; Laplanche, G.; Freudenberger, J.; Kauffmann, A.; Heilmaier, M.; Aktaa, J.
2021. Scripta materialia, 194, Art.-Nr.: 113667. doi:10.1016/j.scriptamat.2020.113667
Microstructural and Chemical Constitution of the Oxide Scale formed on a Pesting-Resistant Mo-Si-Ti Alloy
Obert, S.; Kauffmann, A.; Seils, S.; Boll, T.; Kauffmann-Weiss, S.; Chen, H.; Anton, R.; Heilmaier, M.
2021. Corrosion science, 178, Art.-Nr. 109081. doi:10.1016/j.corsci.2020.109081
2020
Dimensionless Enthalpy as Characteristic Factor for Process Control in Laser Powder Bed Fusion
Hanemann, T.; Seyfert, C.; Holfelder, P.; Rota, A.; Heilmaier, M.
2020. Journal of Laser Micro/Nanoengineering, 15 (3), 257–266. doi:10.2961/jlmn.2020.03.2017
Origins of strength and plasticity in the precious metal based High-Entropy Alloy AuCuNiPdPt
Thiel, F.; Geissler, D.; Nielsch, K.; Kauffmann, A.; Seils, S.; Heilmaier, M.; Utt, D.; Albe, K.; Motylenko, M.; Rafaja, D.; Freudenberger, J.
2020. Acta materialia, 185, 400–411. doi:10.1016/j.actamat.2019.12.020
Formation of complex intermetallic phases in novel refractory high-entropy alloys NbMoCrTiAl and TaMoCrTiAl: Thermodynamic assessment and experimental validation
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Laube, S.; Heilmaier, M.
2020. Journal of alloys and compounds, 842, Article no: 155726. doi:10.1016/j.jallcom.2020.155726
Dislocation-based Serrated Plastic Flow of High Entropy Alloys at Cryogenic Temperatures
Tirunilai, A. S.; Hanemann, T.; Weiss, K.-P.; Freudenberger, J.; Heilmaier, M.; Kauffmann, A.
2020. Acta materialia, 200, 980–991. doi:10.1016/j.actamat.2020.09.052
A zone melting device for the in situ observation of directional solidification using high-energy synchrotron x rays editors-pick
Gombola, C.; Hasemann, G.; Kauffmann, A.; Sprenger, I.; Laube, S.; Schmitt, A.; Gang, F.; Bolbut, V.; Oehring, M.; Blankenburg, M.; Schell, N.; Staron, P.; Pyczak, F.; Krüger, M.; Heilmaier, M.
2020. Review of scientific instruments, 91 (9), Art.Nr. 093901. doi:10.1063/5.0019020
Effect of Y Additions on the Oxidation Behaviour of Novel Refractory High-Entropy Alloy NbMoCrTiAl at 1000 °C in Air
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Oxidation of metals, 94 (1-2), 147–163. doi:10.1007/s11085-020-09983-6
High-temperature low cycle fatigue behavior of an equiatomic CoCrFeMnNi high-entropy alloy
Lu, K.; Chauhan, A.; Litvinov, D.; Walter, M.; Tirunilai, A. S.; Freudenberger, J.; Kauffmann, A.; Heilmaier, M.; Aktaa, J.
2020. Materials science and engineering / A, 791, Article: 139781. doi:10.1016/j.msea.2020.139781
Challenges and Perspectives of the Phase Formation of Internally Oxidized PIT-Type Conductors
Buehler, C.; Holzapfel, B.; Sailer, B.; Wanior, M.; Abaecherli, V.; Thoener, M.; Schlenga, K.; Kauffmann-WEISS, S.; Haenisch, J.; Heilmaier, M.
2020. IEEE transactions on applied superconductivity, 30 (4), Article: 6000805. doi:10.1109/TASC.2020.2969906
Creep of an oxidation resistant coated Mo-9Si-8B alloy
Gombola, C.; Schliephake, D.; Heilmaier, M.; Perepezko, J. H.
2020. Intermetallics, 120, 106743. doi:10.1016/j.intermet.2020.106743
Breakdown of Varvenne scaling in (AuNiPdPt) Cu high-entropy alloys
Thiel, F.; Utt, D.; Kauffmann, A.; Nielsch, K.; Albe, K.; Heilmaier, M.; Freudenberger, J.
2020. Scripta materialia, 181, 15–18. doi:10.1016/j.scriptamat.2020.02.007
Temperature dependent strengthening contributions in austenitic and ferritic ODS steels
Seils, S.; Kauffmann, A.; Hinrichs, F.; Schliephake, D.; Boll, T.; Heilmaier, M.
2020. Materials science and engineering / A, 786, Article: 139452. doi:10.1016/j.msea.2020.139452
Solid solution strengthening and deformation behavior of single-phase Cu-base alloys under tribological load
Laube, S.; Kauffmann, A.; Ruebeling, F.; Freudenberger, J.; Heilmaier, M.; Greiner, C.
2020. Acta materialia, 185, 300–308. doi:10.1016/j.actamat.2019.12.005
Characterisation of the oxidation and creep behaviour of novel Mo-Si-Ti alloys
Obert, S.; Kauffmann, A.; Heilmaier, M.
2020. Acta materialia, 184, 132–142. doi:10.1016/j.actamat.2019.11.045
In Situ Thermal-Stage Fitted-STEM Characterization of Spherical-Shaped Co/MoS Nanoparticles for Conversion of Heavy Crude Oils
Ramos, M.; Galindo-Hernández, F.; Torres, B.; Domínguez-Esquivel, J. M.; Heilmaier, M.
2020. Catalysts, 10 (11), Art.-Nr.: 1239. doi:10.3390/catal10111239
A New Method for Determining the Brittle-to-Ductile Transition Temperature of a TiAl Intermetallic
Nizamoglu, S.; Lang, K.-H.; Guth, S.; Heilmaier, M.
2020. Metals, 10 (11), Article no: 1550. doi:10.3390/met10111550
Microstructural Investigations of Novel High Temperature Alloys Based on NiAl-(Cr,Mo)
Gombola, C.; Kauffmann, A.; Geramifard, G.; Blankenburg, M.; Heilmaier, M.
2020. Metals, 10 (7), Art. Nr.: 961. doi:10.3390/met10070961
On the chemical and microstructural requirements for the pesting-resistance of Mo-Si-Ti alloys
Obert, S.; Kauffmann, A.; Seils, S.; Schellert, S.; Weber, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of materials research and technology, 9 (4), 8556–8567. doi:10.1016/j.jmrt.2020.06.002
Microstructural changes in CoCrFeMnNi under mild tribological load
Dollmann, A.; Kauffmann, A.; Heilmaier, M.; Haug, C.; Greiner, C.
2020. Journal of materials science, 55 (26), 12353–12372. doi:10.1007/s10853-020-04806-0
Effect of Water Vapor on the Oxidation Behavior of the Eutectic High‐Temperature Alloy Mo‐20Si‐52.8Ti
Weber, M.; Gorr, B.; Christ, H.-J.; Obert, S.; Kauffmann, A.; Heilmaier, M.
2020. Advanced engineering materials, 22 (7), Art. Nr.: 2000219. doi:10.1002/adem.202000219
Magnetron sputtered silicon coatings as oxidation protection for Mo‐based alloys
Anton, R.; Laska, N.; Schulz, U.; Obert, S.; Heilmaier, M.
2020. Advanced engineering materials, 22 (7), Article Nr.: 2000218. doi:10.1002/adem.202000218
Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
Tirunilai, A. S.; Hanemann, T.; Reinhart, C.; Tschan, V.; Weiss, K.-P.; Laplanche, G.; Freudenberger, J.; Heilmaier, M.; Kauffmann, A.
2020. Materials science and engineering / A, 783, Art. Nr.: 139290. doi:10.1016/j.msea.2020.139290
A new strategy to intrinsically protect refractory metal based alloys at ultra high temperatures
Gorr, B.; Müller, F.; Schellert, S.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Corrosion science, 166, Art. Nr.: 108475. doi:10.1016/j.corsci.2020.108475
Controlling crystallographic ordering in Mo–Cr–Ti–Al high entropy alloys to enhance ductility
Laube, S.; Chen, H.; Kauffmann, A.; Schellert, S.; Müller, F.; Gorr, B.; Müller, J.; Butz, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of alloys and compounds, 823, Article No.153805. doi:10.1016/j.jallcom.2020.153805
2019
Study of indium tin oxide–MoS interface by atom probe tomography
Ramos, M.; Nogan, J.; Boll, T.; Kauffmann-Weiss, S.; Rodriguez-Gonzalez, C. A.; Enriquez-Carrejo, J. L.; Heilmaier, M.
2019. MRS communications, 9 (4), 1261–1266. doi:10.1557/mrc.2019.150
Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta-Nb-Mo-Cr-Ti-Al
Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C. H.; Harding, I.; Kumar, K. S.; Szabo, D. V.; Schlabach, S.; Kauffmann-Weiss, S.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Acta materialia, 176, 123–133. doi:10.1016/j.actamat.2019.07.001
On the oxidation mechanism of refractory high entropy alloys
Müller, F.; Gorr, B.; Christ, H.-J.; Müller, J.; Butz, B.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2019. Corrosion science, 159, Article: 108161. doi:10.1016/j.corsci.2019.108161
Influence of SiC/Silica and Carbon/Silica Interfaces on the High‐Temperature Creep of Silicon Oxycarbide‐Based Glass Ceramics : A Case Study
Stabler, C.; Schliephake, D.; Heilmaier, M.; Rouxel, T.; Kleebe, H.-J.; Narisawa, M.; Riedel, R.; Ionescu, E.
2019. Advanced engineering materials, 21 (6), Art. Nr.: 1800596. doi:10.1002/adem.201800596
In-situ alloying of AlSi10Mg+Si using Selective Laser Melting to control the coefficient of thermal expansion
Hanemann, T.; Carter, L. N.; Habschied, M.; Adkins, N. J. E.; Attallah, M. M.; Heilmaier, M.
2019. Journal of alloys and compounds, 795, 8–18. doi:10.1016/j.jallcom.2019.04.260
Microstructural evolution during creep of lamellar eutectoid and off-eutectoid FeAl/FeAl2 alloys
Schmitt, A.; Kumar, K. S.; Kauffmann, A.; Heilmaier, M.
2019. Intermetallics, 107, 116–125. doi:10.1016/j.intermet.2019.01.015
Aluminide Coatings on Mo-Si-B-Ti-Fe Alloy
Walsh, Z.; Kasnakjian, S.; Gallegos, L.; Patil, D.; Ravi, V.; Shliephake, D.; Heilmaier, M.
2019. International Corrosion Conference series, March, Art.-Nr. 13501
Precipitation behaviour and mechanical properties of a novel AlMoTaTi complex concentrated alloy
Schliephake, D.; Medvedev, A. E.; Imran, M. K.; Obert, S.; Fabijanic, D.; Heilmaier, M.; Molotnikov, A.; Wu, X.
2019. Scripta materialia, 173, 16–20. doi:10.1016/j.scriptamat.2019.07.033
Constitution, oxidation and creep of eutectic and eutectoid Mo-Si-Ti alloys
Schliephake, D.; Kauffmann, A.; Cong, X.; Gombola, C.; Azim, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Intermetallics, 104, 133–142. doi:10.1016/j.intermet.2018.10.028
High-pressure torsion driven mechanical alloying of CoCrFeMnNi high entropy alloy
Kilmametov, A.; Kulagin, R.; Mazilkin, A.; Seils, S.; Boll, T.; Heilmaier, M.; Hahn, H.
2019. Scripta materialia, 158, 29–33. doi:10.1016/j.scriptamat.2018.08.031
2018
Contribution of Lattice Distortion to Solid Solution Strengthening in a Series of Refractory High Entropy Alloys
Chen, H.; Kauffmann, A.; Laube, S.; Choi, I.-C.; Schwaiger, R.; Huang, Y.; Lichtenberg, K.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2018. Metallurgical and materials transactions / A, 49 (3), 772–781. doi:10.1007/s11661-017-4386-1
Phase Evolution in and Creep Properties of Nb-Rich Nb-Si-Cr Eutectics
Gang, F.; Kauffmann, A.; Heilmaier, M.
2018. Metallurgical and materials transactions / A, 49 (3), 763–771. doi:10.1007/s11661-017-4367-4
Optical and Electrical Investigation of High-Current Arcing Modes and Correlation with Contact Microstructure after Single Current Interruption
Feilbach, A.; Hinrichsen, V.; Hauf, U.; Heilmaier, M.; Boening, M.; Müller, F. E. H.
2018. Proceedings of the 28th International Symposium on Discharges and Electrical Insulation in Vacuum: Greifswald, Germany, 23rd-28th September 2018. Volume 2., 169–172, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/DEIV.2018.8537042
Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy
Gorr, B.; Mueller, F.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Schweiger, R.; Szabo, D. V.; Heilmaier, M.
2018. TMS 2018. 147th Annual Meeting & Exhibition Supplemental Proceedings (TMS), 647–659, Springer. doi:10.1007/978-3-319-72526-0_61
Peculiarities of deformation of CoCrFeMnNi at cryogenic temperatures
Tirunilai, A. S.; Sas, J.; Weiss, K.-P.; Chen, H.; Szabo, D. V.; Schlabach, S.; Haas, S.; Geissler, D.; Freudenberger, J.; Heilmaier, M.; Kauffmann, A.
2018. Journal of materials research, 1–14. doi:10.1557/jmr.2018.252
2017
Tensile creep of miniaturized specimens
Luan, L.; Riesch-Oppermann, H.; Heilmaier, M.
2017. Journal of materials research, 32 (24), 4563–4572. doi:10.1557/jmr.2017.414
Microstructure Formation and Resistivity Change in CuCr during Rapid Solidification
Hauf, U.; Kauffmann, A.; Kauffmann-Weiss, S.; Feilbach, A.; Boening, M.; Mueller, F. E. H.; Hinrichsen, V.; Heilmaier, M.
2017. Metals, 7 (11), Art.Nr. 478. doi:10.3390/met7110478
Creep of binary Fe-Al alloys with ultrafine lamellar microstructures
Schmitt, A.; Kumar, S. K.; Kauffmann, A.; Li, X.; Stein, F.; Heilmaier, M.
2017. Intermetallics, 90, 180–187. doi:10.1016/j.intermet.2017.07.016
The effect of the ternary elements B, Ti, Cr, Cu, and Mo on fully lamellar FeAl + FeAl2 alloys
Li, X.; Schmitt, A.; Heilmaier, M.; Stein, F.
2017. Journal of alloys and compounds, 722, 219–228. doi:10.1016/j.jallcom.2017.06.106
Combinatorial exploration of the high entropy alloy system Co-Cr-Fe-Mn-Ni
Kauffmann, A.; Stüber, M.; Leiste, H.; Ulrich, S.; Schlabach, S.; Szabo, D. V.; Seils, S.; Gorr, B.; Chen, H.; Seifert, H.-J.; Heilmaier, M.
2017. Surface and coatings technology, 325, 174–180. doi:10.1016/j.surfcoat.2017.06.041
Optimisation of selective laser melting parameters for the Ni-based superalloy IN-738 LC using Doehlert’s design
Perevoshchikova, N.; Rigaud, J.; Sha, Y.; Heilmaier, M.; Finnin, B.; Labelle, E.; Wu, X.
2017. Rapid prototyping journal, 23 (5), 881–892. doi:10.1108/RPJ-04-2016-0063
Effect of Ti addition on the thermal expansion anisotropy of Mo₅Si₃
Azim, M. A.; Christ, H.-J.; Gorr, B.; Kowald, T.; Lenchuk, O.; Albe, K.; Heilmaier, M.
2017. Acta materialia, 132, 25–34. doi:10.1016/j.actamat.2017.02.066
High-Resolution Studies on Nanoscaled Ni/YSZ Anodes
Szász, J.; Seils, S.; Klotz, D.; Störmer, H.; Heilmaier, M.; Gerthsen, D.; Yokokawa, H.; Ivers-Tiffée, E.
2017. Chemistry of materials, 29 (12), 5113–5123. doi:10.1021/acs.chemmater.7b00360
Coarsening kinetics of lamellar microstructures : Experiments and simulations on a fully-lamellar Fe-Al in situ composite
Li, X.; Bottler, F.; Spatschek, R.; Schmitt, A.; Heilmaier, M.; Stein, F.
2017. Acta materialia, 127, 230–243. doi:10.1016/j.actamat.2017.01.041
Phase-field simulation of the microstructure evolution in the eutectic NiAl-34Cr system
Kellner, M.; Sprenger, I.; Steinmetz, P.; Hötzer, J.; Nestler, B.; Heilmaier, M.
2017. Computational materials science, 128, 379–387. doi:10.1016/j.commatsci.2016.11.049
Interdependency of test environment and current breaking capacity of a model vacuum switch
Feilbach, A.; Menne, H.; Hinrichsen, V.; Hauf, U.; Heilmaier, M.; Böning, M.; Müller, F. E. H.
2017. Proceedings of the 63rd IEEE Holm Conference on Electrical Contacts, Denver, Colorado, USA, 10th - 13th September 2017, 258–263, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/HOLM.2017.8088097
Effect of microalloying with silicon on high temperature oxidation resistance of novel refractory high-entropy alloy Ta-Mo-Cr-Ti-Al
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Materials at high temperatures, 35 (1-3), 168–176. doi:10.1080/09603409.2017.1389115
Effect of Ti content and nitrogen on the high-temperature oxidation behavior of (Mo,Ti)5Si3
Azim, M. A.; Gorr, B.; Christ, H.-J.; Lenchuk, O.; Albe, K.; Schliephake, D.; Heilmaier, M.
2017. Intermetallics, 90, 103–112. doi:10.1016/j.intermet.2017.05.023
Characterization of Oxidation Kinetics of Mo-Si-B-Based Materials
Azim, M. A.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Koch, U.; Engelhard, M.
2017. Oxidation of metals, 87 (1-2), 89–108. doi:10.1007/s11085-016-9659-3
Face Centred Cubic Multi-Component Equiatomic Solid Solutions in the Au-Cu-Ni-Pd-Pt System
Freudenberger, J.; Rafaja, D.; Geissler, D.; Giebeler, L.; Ullrich, C.; Kauffmann, A.; Heilmaier, M.; Nielsch, K.
2017. Metals, 7 (4), Art. Nr.: 135. doi:10.3390/met7040135
Enhanced Oxidation Resistance of Mo-Si-B-Ti Alloys by Pack Cementation
Schliephake, D.; Gombola, C.; Kauffmann, A.; Heilmaier, M.; Perepezko, J. H.
2017. Oxidation of metals, 88 (SI, 3-4), 267–277. doi:10.1007/s11085-017-9730-8
High-Temperature Oxidation Behavior of Refractory High-Entropy Alloys : Effect of Alloy Composition
Gorr, B.; Müller, F.; Azim, M.; Christ, H.-J.; Müller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Oxidation of metals, 88 (3-4), 339–349. doi:10.1007/s11085-016-9696-y
2016
Nanostructure evolution in ODS steels under ion irradiation
Rogozhkin, S.; Bogachev, A.; Korchuganova, O.; Nikitin, A.; Orlov, N.; Aleev, A.; Zaluzhnyi, A.; Kozodaev, M.; Kulevoy, T.; Chalykh, B.; Lindau, R.; Hoffmann, J.; Möslang, A.; Vladimirov, P.; Klimenkov, M.; Heilmaier, M.; Wagner, J.; Seils, S.
2016. Nuclear materials and energy, 9, 66–74. doi:10.1016/j.nme.2016.06.011
High-temperature creep behavior of a SiOC glass ceramic free of segregated carbon
Stabler, C.; Roth, F.; Narisawa, M.; Schliephake, D.; Heilmaier, M.; Lauterbach, S.; Kleebe, H.-J.; Riedel, R.; Ionescu, E.
2016. Journal of the European Ceramic Society, 36 (15), 3747–3753. doi:10.1016/j.jeurceramsoc.2016.04.015
Validation of the applicability of a creep model for directionally solidified eutectics with a lamellar microstructure
Albiez, J.; Sprenger, I.; Weygand, D.; Heilmaier, M.; Böhlke, T.
2016. Proceedings in applied mathematics and mechanics, 16 (1), 297–298. doi:10.1002/pamm.201610137
Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting
Tomus, D.; Tian, Y.; Rometsch, P. A.; Heilmaier, M.; Wu, X.
2016. Materials science and engineering / A, 667, 42–53. doi:10.1016/j.msea.2016.04.086
Physically motivated model for creep of directionally solidified eutectics evaluated for the intermetallic NiAl-9Mo
Albiez, J.; Sprenger, I.; Seemüller, C.; Weygand, D.; Heilmaier, M.; Böhlke, T.
2016. Acta materialia, 110, 377–385. doi:10.1016/j.actamat.2016.02.024
Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al
Chen, H.; Kauffmann, A.; Gorr, B.; Schliephake, D.; Seemüller, C.; Wagner, J. N.; Christ, H.-J.; Heilmaier, M.
2016. Journal of alloys and compounds, 661, 206–215. doi:10.1016/j.jallcom.2015.11.050
Effect of strain-rate on the deformation response of D0₃-ordered Fe₃Al
Janda, D.; Ghassemi-Armaki, H.; Bruder, E.; Hockauf, M.; Heilmaier, M.; Kumar, K. S.
2016. Acta materialia, 103, 909–918. doi:10.1016/j.actamat.2015.11.002
MIM for HT turbine parts : Gas-atomized versus mechanically milled Nb-si alloy powder
Mulser, M.; Hartwig, T.; Seemüller, C.; Heilmaier, M.; Adkins, N.; Wickins, M.
2016. World Powder Metallurgy 2016 Congress and Exhibition, Hamburg, Germany, 9th - 13th October 2016, European Powder Metallurgy Association (EPMA)
Investigation of current breaking capacity of vacuum interrupters with focus on contact material properties with the help of a reference model vacuum circuit breaker
Feilbach, A.; Hauf, U.; Böning, M.; Hinrichsen, V.; Heilmaier, M.; Müller, F. E. H.
2016. 27th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Suzhou, China, 18–23 September 2016. Ed.: R. Boxman, 1–4, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/DEIV.2016.7748691
The Al-Rich Part of the Fe-Al Phase Diagram
Li, X.; Scherf, A.; Heilmaier, M.; Stein, F.
2016. Journal of phase equilibria and diffusion, 37 (2), 162–173. doi:10.1007/s11669-015-0446-7
Investigation of the heat affected volume of CuCr contact material for vacuum interrupters
Hauf, U.; Feilbach, A.; Böning, M.; Heilmaier, M.; Hinrichsen, V.; Müller, F. E. H.
2016. 27th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Suzhou, China, 18-23 Sept. 2016, 1–4, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/DEIV.2016.7748695
Synthesis and high-temperature creep behavior of a SiLuOC-based glass-ceramic
Stabler, C.; Seemüller, C.; Choudhary, A.; Heilmaier, M.; Lauterbach, S.; Kleebe, H.-J.; Ionescu, E.
2016. Journal of the Ceramic Society of Japan, 124 (10), 1006–1012. doi:10.2109/jcersj2.16101
High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb-20Mo-20Cr-20Ti-20Al with and without Si addition
Gorr, B.; Mueller, F.; Christ, H.-J.; Mueller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2016. Journal of alloys and compounds, 688, Part B, 468–477. doi:10.1016/j.jallcom.2016.07.219
Orientation relationship of eutectoid FeAl and FeAl₂
Scherf, A.; Kauffmann, A.; Kauffmann-Weiss, S.; Scherer, T.; Li, X.; Stein, F.; Heilmaier, M.
2016. Journal of applied crystallography, 49 (2), 442–449. doi:10.1107/S1600576716000911
Microstructure Evolution in a New Refractory High-Entropy Alloy W-Mo-Cr-Ti-Al
Gorr, B.; Azim, M.; Christ, H.-J.; Chen, H.; Szabo, D. V.; Kauffmann, A.; Heilmaier, M.
2016. Metallurgical and Materials Transactions A, 47, 961–970. doi:10.1007/s11661-015-3246-0
2015
One-dimensional simulation of the creep behavior of directionally solidified NiAl-9Mo
Albiez, J.; Sprenger, I.; Heilmaier, M.; Böhlke, T.
2015. Proceedings in applied mathematics and mechanics, 15 (1), 269–270. doi:10.1002/pamm.201510125
Oxidation behavior of pack-cemented Si-B oxidation protection coatings for Mo-Si-B alloys at 1300°C
Lange, A.; Heilmaier, M.; Sossamann, T. A.; Perepezko, J. H.
2015. Surface and coatings technology, 266, 57–63. doi:10.1016/j.surfcoat.2015.02.015
Microstructure and Phase Transformation Temperatures of Two-Phase FeAl (B2) + FeAl2 Alloys
Li, X.; Palm, M.; Scherf, A.; Janda, D.; Heilmaier, M.; Stein, F.
2015. Advanced structural and functional intermetallic-based alloys : November 30 - December 5, 2014, Boston, Massachusetts, USA ; [Symposium YY: Advanced Structural and Functional Intermetallic-Based Alloys ; held at the 2014 MRS fall meeting] . Ed.: I. Baker, 55–60, Materials Research Society. doi:10.1557/opl.2014.965
Mechanisms of oxide scale formation on yttrium-alloyed Mo-Si-B containing fine-grained microstructure
Majumdar, S.; Dönges, B.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
2015. Corrosion science, 90, 76–88. doi:10.1016/j.corsci.2014.09.017
Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys
Gorr, B.; Azim, M.; Christ, H.-J.; Mueller, T.; Schliephake, D.; Heilmaier, M.
2015. Journal of alloys and compounds, 624, 270–278. doi:10.1016/j.jallcom.2014.11.012
The influence of microstructural features on the electrical conductivity of solid phase sintered CuCr composites
Klinski-Wetzel, K. von; Kowanda, C.; Heilmaier, M.; Mueller, F. E. H.
2015. Journal of alloys and compounds, 631, 237–247. doi:10.1016/j.jallcom.2014.12.249
Experimental and Numerical Investigation on the Phase Separation Affected by Cooling Rates and Marangoni Convection in Cu-Cr Alloys
Wang, F.; Klinski-Wetzel, K. von; Mukherjee, R.; Nestler, B.; Heilmaier, M.
2015. Metallurgical and materials transactions / A, 46 (4), 1756–1766. doi:10.1007/s11661-015-2745-3
Oxidation Behavior of Binary Aluminium-Rich Fe-Al Alloys with a Fine-Scaled, Lamellar Microstructure
Scherf, A.; Janda, D.; Baghaie Yazdi, M.; Li, X.; Stein, F.; Heilmaier, M.
2015. Oxidation of metals, 83 (5-6), 559–574. doi:10.1007/s11085-015-9535-6
Magnetron Sputtered Mo(Six,Al[1-x])2 Oxidation Protection Coatings for Mo-Si-B Alloys
Lange, A.; Braun, R.; Heilmaier, M.
2015. Oxidation of Metals, 84 (1-2), 91–104. doi:10.1007/s11085-015-9545-4
Creep Resistance and Oxidation Behavior of Novel Mo-Si-B-Ti Alloys
Azim, M. A.; Schliephake, D.; Hochmuth, C.; Gorr, B.; Christ, H.-J.; Glatzel, U.; Heilmaier, M.
2015. JOM, 67 (11), 2621–2628. doi:10.1007/s11837-015-1560-z
Influence of Vanadium on the Oxidation Resistance of the Intermetallic Phase Nb5Si3
Gang, F.; Klinski-Wetzel, K. von; Wagner, J. N.; Heilmaier, M.
2015. Oxidation of metals, 83 (1-2), 119–132. doi:10.1007/s11085-014-9510-7
2014
High-temperature oxidation behavior of Mo-Si-B-based and Co-Re-Cr-based alloys
Gorr, B.; Wang, L.; Burk, S.; Azim, M.; Majumdar, S.; Christ, H.-J.; Mukherji, D.; Rösler, J.; Schliephake, D.; Heilmaier, M.
2014. Intermetallics, 48, 34–43. doi:10.1016/j.intermet.2013.10.008
Correlation between microstructure and properties of fine grained Mo-Mo3Si-Mo5SiB2 alloys
Krüger, M.; Jain, P.; Kumar, K. S.; Heilmaier, M.
2014. Intermetallics, 48, 10–18. doi:10.1016/j.intermet.2013.10.025
Influence of zirconium content on microstructure and creep properties of Mo-9Si-8B alloys
Hochmuth, C.; Schliephake, D.; Völkl, R.; Heilmaier, M.; Glatzel, U.
2014. Intermetallics, 48, 3–9. doi:10.1016/j.intermet.2013.08.017
Influence of the processing technique on the properties of Nb-Si intermetallic composites for high temperature applications processed by MIM and HIP
Mulser, M.; Hartwig, T.; Seemüller, C.; Heilmaier, M.; Adkins, N.; Wickins, M.
2014. Advances in powder metallurgy & particulate Materials - 2014 : proceedings of the 2014 International Conference on Powder Metallurgy & Particulate Materials sponsored by the Metal Powder Industries Federation, May 18 - 22, Orlando, FL. Ed.: R.A. Chernenkoff, 04/8–04/16, Metal Powder Industries Federation
Hall-Petch Breakdown at Elevated Temperatures
Schneibel, J. H.; Heilmaier, M.
2014. Materials transactions, 55 (1), 44–51. doi:10.2320/matertrans.MA201309
High-Temperature Creep and Oxidation Behavior of Mo-Si-B Alloys with High Ti Contents
Schliephake, D.; Azim, M.; Klinski-Wetzel, K. von; Gorr, B.; Christ, H.-J.; Bei, H.; George, E. P.; Heilmaier, M.
2014. Metallurgical and materials transactions / A, 45 (3), 1102–1111. doi:10.1007/s11661-013-1944-z
Influence of Powder Metallurgical Processing Routes on Phase Formations in a Multicomponent NbSi-Alloy
Seemüller, C.; Hartwig, T.; Mulser, M.; Adkins, N.; Wickins, M.; Heilmaier, M.
2014. JOM, 66 (9), 1900–1907. doi:10.1007/s11837-014-1096-7
High-Temperature Creep Behavior of SiOC Glass-Ceramics: Influence of Network Carbon Versus Segregated Carbon
Ionescu, E.; Balan, C.; Kleebe, H.-J.; Müller, M. M.; Guillon, O.; Schliephake, D.; Heilmaier, M.; Riedel, R.
2014. Journal of the American Ceramic Society, 97 (12), 3935–3942. doi:10.1111/jace.13206
2013
Influence of microstructure and processing on mechanical properties of advanced Nb-silicide alloys
Seemüller, C.; Heilmaier, M.; Hartwig, T.; Mulser, M.; Adkins, N.; Wickins, M.
2013. MRS online proceedings library, 1516, 317–322. doi:10.1557/opl.2012.1655
Effect of Ti (Macro-) Alloying on the High-Temperature Oxidation Behavior of Ternary Mo–Si–B Alloys at 820–1,300 °C
Azimovna Azim, M.; Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Bornemann, R.; Bolívar, P. H.
2013. Oxidation of metals, 80 (3-4), 231–242. doi:10.1007/s11085-013-9375-1
A Study on Effect of Reactive and Rare Earth Element Additions on the Oxidation Behavior of Mo–Si–B System
Majumdar, S.; Burk, S.; Schliephake, D.; Krüger, M.; Christ, H.-J.; Heilmaier, M.
2013. Oxidation of metals, 80 (3-4), 219–230. doi:10.1007/s11085-013-9374-2
The effect of micro-alloying with Zr and Nb on the oxidation behavior of Fe₃Al and FeAl alloys
Janda, D.; Fietze, H.; Galetz, M. C.; Heilmaier, M.
2013. Intermetallics, 41, 51–57. doi:10.1016/j.intermet.2013.04.016
Microstructural and micro-mechanical properties of Mo-Si-B alloyed with Y and La
Majumdar, S.; Kumar, A.; Schliephake, D.; Christ, H.-J.; Jing, X.; Heilmaier, M.
2013. Materials science and engineering / A, 573 (June), 257–263. doi:10.1016/j.msea.2013.02.053
Effect of Yttrium Alloying on Intermediate to High-Temperature Oxidation Behavior of Mo-Si-B Alloys
Majumdar, S.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2013. Metallurgical and materials transactions / A, 44 (5), 2243–2257. doi:10.1007/s11661-012-1589-3
Influence of fiber alignment on creep in directionally solidified NiAl-10Mo in-situ composites
Seemüller, C.; Heilmaier, M.; Haenschke, T.; Bei, H.; Dlouhy, A.; George, E. P.
2013. Intermetallics, 35 (April), 110–115. doi:10.1016/j.intermet.2012.12.007
Effect of Phase Architecture on the Thermal Expansion Behavior of Interpenetrating Metal/Ceramic Composites
Roy, S.; Albrecht, P.; Przybilla, L.; Weidenmann, K. A.; Heilmaier, M.; Wanner, A.
2013. Processing and Properties of Advanced Ceramics and Composites V, 33–43, John Wiley and Sons. doi:10.1002/9781118744109.ch4
Microstructural features of switched Cu-Cr surface melt layers
Klinski-Wetzel, K. von; Kowanda, C.; Rettenmaier, T.; Heilmaier, M.; Hinrichsen, V.; Mueller, F. E. H.
2013. 18th Plansee Seminar, 3-7 June 2013 [Konferenz]
Effects of Zr Additions on the Microstructure and the Mechanical Behavior of PM Mo-Si-B Alloys
Krüger, M.; Schliephake, D.; Jain, P.; Kumar, K. S.; Schuhmacher, G.; Heilmaier, M.
2013. JOM, 65 (2), 301–306. doi:10.1007/s11837-012-0475-1
2012
Parameters influencing the electrical conductivity of CuCr alloys
Klinski-Wetzel, K. von; Kowanda, C.; Böning, M.; Heilmaier, M.; Müller, F. E. H.
2012. 25th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV’12), Tomsk, Russia, September 2-7, 2012, 392–395, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/DEIV.2012.6412536
On the Estimation of True Hall-Petch Constants and Their Role on the Superposition Law Exponent in Al Alloys
Thangaraju, S.; Heilmaier, M.; Murty, B. S.; Vadlamani, S. S.
2012. Advanced Engineering Materials, 14 (10), 892–897. doi:10.1002/adem.201200114
Effects of boron addition on microstructure and mechanical properties of Co-Re based high temperature alloys
Mukherji, D.; Rösler, J.; Krüger, M.; Heilmaier, M.; Bölitz, M.-C.; Völkl, R.; Glatzel, U.; Szentmiklosi, L.
2012. Scripta Materialia, 66 (1), 60–63. doi:10.1016/j.scriptamat.2011.10.007
High-temperature oxidation behaviour of a single phase (Mo,Ti)5Si3 (Mo-Si-Ti) alloy
Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Hochmuth, C.; Glatzel, U.
2012. Scripta Materialia, 66 (5), 223–226. doi:10.1016/j.scriptamat.2011.10.042
Two strain hardening mechanisms in nanocrystalline austenitic steel - An in-situ synchrotron X-Ray diffraction study
Schloth, P.; Weisser, M. A.; Swygenhoven, H. van; Van Petegem, S.; Susila, P.; Subramanya Sarma, V.; Murty, B. S.; Lauterbach, S.; Heilmaier, M.
2012. Scripta Materialia, 66 (9), 690–693. doi:10.1016/j.scriptamat.2012.01.021
Potential of mechanical surface treatment for mould and die production
Groche, P.; Engels, M.; Steitz, M.; Müller, C.; Scheil, J.; Heilmaier, M.
2012. International Journal of Materials Research, 103 (6), 783–789. doi:10.3139/146.110778
2011
Fatigue resistance of Fe3Al-based alloys
Gang, F.; Krüger, M.; Laskowsky, A.; Rühe, H.; Schneibel, J. H.; Heilmaier, M.
2011. Intermetallic-based alloys for structural and functional applications : symposium held november 29 - december 3, Boston, Massachussetts, U.S.A.; [Symposium N, "Intermetallic-Based Alloys for Structural and Functional Applications" held ... at the 2010 MRS Fall Meeting]. Ed.: M. Palm, 59–64, Materials Research Society. doi:10.1557/opl.2011.26
Microstructural and mechanical properties of ternary Mo-Si-B alloys resulting from different processing routes
Krüger, M.; Heilmaier, M.; Shyrska, V.; Loboda, P. I.
2011. Intermetallic-based alloys for structural and functional applications : symposium held november 29 - december 3, Boston, Massachussetts, U.S.A.; [Symposium N, "Intermetallic-Based Alloys for Structural and Functional Applications" held ... at the 2010 MRS Fall Meeting]. Ed.: M. Palm, 361–366, Materials Research Society. doi:10.1557/opl.2011.188
Temperature dependence of the strength of fine- and ultrafine-grained materials
Schneibel, J. H.; Heilmaier, M.; Hasemann, G.; Shanmugasundaram, T.
2011. Acta Materialia, 59 (3), 1300–1308. doi:10.1016/j.actamat.2010.10.062
Phase Continuity in High Temperature Mo-Si-B Alloys: A FIB-Tomography Study
Hassomeris, O.; Schumacher, G.; Krüger, M.; Heilmaier, M.; Banhart, J.
2011. Intermetallics, 19 (4), 470–475
Modification of Mo-Si alloy microstructure by small additions of Zr
Mousa, M.; Wanderka, N.; Timpel, M.; Singh, S.; Krüger, M.; Heilmaier, M.; Banhart, J.
2011. Ultramicroscopy, 111 (6), 706–710
Effect of yttria particle size on the microstructure and compression creep properties of nanostructured oxide dispersion strengthened ferritic (Fe-12Cr-2W-0.5Y2O3) alloy
Susila, P.; Sturm, D.; Heilmaier, M.; Murty, B. S.; Subramanya Sarma, V.
2011. Materials Science and Engineering A: Properties, Microstructure and Processing, 528 (13-14), 4579–4584. doi:10.1016/j.msea.2011.02.078
Thermal stability of vacuum hot pressed nanostructured Al-Cu alloys
Shanmugasundaram, T.; Heilmaier, M.; Murty, B. S.; Subramanya Sarma, V.
2011. Materials Science Forum, 690, 234–237. doi:10.4028/www.scientific.net/MSF.690.234
Oxidation behaviour of Mo-Si-B-(X) alloys: Macro- and Microalloying (X= Cr, Zr, La2O3)
Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
2011. JOM: The Journal of the Minerals, Metals & Materials Society, 63 (12), 32–36
2010
Tracking of RRR value and microstructure in high purity niobium along the production chain from the ingot to the finished cavity
Janda, D.; Heilmaier, M.; Singer, G. X.; Singer, W.; Simader, W.; Grill, R.
2010. 1st International Particle Accelerator Conference, IPAC 2010; Kyoto; Japan; 23 May 2010 through 28 May 2010, 435–437, ACFA
Influence of processing on the microstructure and mechanical behaviour of Mo-Si-B alloys
Krüger, M.; Saage, H.; Heilmaier, M.; Böning, M.; Kestler, H.
2010. 15th International Conference on the Strength of Materials (ICSMA), Dresden, Germany, 16.-21. August 2009. Ed.: W. Skrotzki, 374–377, Curran
Compression creep studies of mechanically alloyed nanostructured Fe-12Cr-2W-0.25Y2O3 ODS alloy
Susila, P.; Sturm, D.; Heilmaier, M.; Murty, B. S.; Subramanya Sarma, V.
2010. 15th International Conference on the Strength of Materials (ICSMA), Dresden, Germany, 16.-21. August 2009. Ed.: W. Skrotzki, 386–389, Curran
Synthesis and characterization of fibre-reinforced microstructures in NiAl-Mo(Cr)
Haenschke, T.; Heilmaier, M.; George, E. P.; Bei, H.; Krüger, M.
2010. 15th International Conference on the Strength of Materials (ICSMA), Dresden, Germany, 16.-21. August 2009. Ed.: W. Skrotzki, 278–281, Curran
High temperature creep behaviour of Al-rich Ti-Al alloys
Sturm, D.; Heilmaier, M.; Saage, H.; Paninski, M.; Schmitz, G. J.; Drevermann, A.; Palm, M.; Stein, F.; Engberding, N.; Kelm, K.; Irsen, S.
2010. 15th International Conference on the Strength of Materials (ICSMA), Dresden, Germany, 16.-21. August 2009. Ed.: W. Skrotzki, 362–365, Curran
Creep strength of a binary Al62Ti38 alloy
Sturm, D.; Heilmaier, M.; Saage, H.; Aguilar, J.; Schmitz, G. .. J.; Drevermann, A.; Palm, M.; Stein, F.; Engberding, N.; Kelm, K.; Irsen, S.
2010. International Journal of Materials Research, 101 (5), 676–679. doi:10.3139/146.110321
L21-ordered Fe-Al-Ti alloys
Krein, R.; Friak, M.; Neugebauer, J.; Palm, M.; Heilmaier, M.
2010. Intermetallics, 18 (7), 1360–1364. doi:10.1016/j.intermet.2009.12.036
Low cycle fatigue of Fe3Al-based iron aluminide with and without Cr
Schneibel, J. H.; Rühe, H.; Heilmaier, M.; Saage, H.; Goncharenko, M.; Loboda, P.
2010. Intermetallics, 18 (7), 1369–1374. doi:10.1016/j.intermet.2010.03.013
On the Hall-Petch Relationship in a Nanostructured Al-Cu Alloy
Shanmugasundaram, T.; Heilmaier, M.; Murty, B. S.; Subramanya Sarma, V.
2010. Materials Science and Engineering A, 527 (29-30), 7821–7825. doi:10.1016/j.msea.2010.08.070
2009
Current Status of Mo-Si-B Silicide Alloys for Ultra-high Temperature Applications
Heilmaier, M.; Saage, H.; Krüger, M.; Jehanno, P.; Böning, M.; Kestler, H.
2009. Advanced intermetallic-based alloys for extreme environment and energy applications: Symposium, Boston, Massachussetts, December 1-4, 2008. Ed.: M. Palm, 1128-U07–07, MRS
Creep and oxidation resistance of refractory metal silicide based materials
Drawin, S.; Heilmaier, M.; Jéhanno, P.; Hu, D.; Belaygue, P.; Tsakiropoulos, P.; Vilasi, M.
2009. 17th International Plansee Seminar 2009: International Conference on High Performance P/M Materials, Reutte, Austria, 25-29 May 2009; Vol. 4, 33/1–10, Reutte
Influence of processing on the microstructure and mechanical properties of Mo-Si-B alloys
Krüger, M.; Saage, H.; Heilmaier, M.; Jéhanno, P.; Böning, M.; Kestler, H.; Shyrska, V.; Dudka, A.; Loboda, P.
2009. 17th International Plansee Seminar 2009: International Conference on High Performance P/M Materials, Reutte, Austria, 25-29 May 2009; Vol. 4, 80/1–9, Reutte
High temperature strength and failure of the Nickelbase superalloy PM 3030
Nganbe, M.; Heilmaier, M.
2009. International Journal of Plasticity, 25 (5), 822–837
Creep strength of centrifugally cast Al-rich TiAl alloys
Sturm, D.; Heilmaier, M.; Saage, H.; Paninski, M.; Schmitz, G. J.; Drevermann, A.; Palm, M.; Stein, F.; Engberding, N.; Kelm, K.; Irsen, S.
2009. Materials Science and Engineering A, 510-511, 373–379
Microstructures of Co-Re-Cr, Mo-Si and Mo-Si-B high temperature alloys
Depka, T.; Somsen, C.; Eggeler, G.; Mukherji, D.; Rösler, J.; Krüger, M.; Saage, H.; Heilmaier, M.
2009. Materials Science and Engineering A, 510-511, 337–341
Recent advances in the development of mechanically alloyed Mo silicide alloys
Heilmaier, M.; Krüger, M.; Saage, H.
2009. Materials Science Forum (MSF), 633-634, 549–558
Ductilization of Mo-Si solid solutions manufactured by powder metallurgy
Saage, H.; Krüger, M.; Sturm, D.; Heilmaier, M.; Schneibel, J. H.; George, E.; L.Heatherly; Somsen, C.; Eggeler, G.; Yang, Y.
2009. Acta Materialia, 57 (13), 3895–3901
Metallic materials for structural applications beyond nickel-based superalloys
Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
2009. JOM: The Journal of the Minerals, Metals & Materials Society, 61 (7), 61–67
Ultrafine-grained nanocluster-strengthened alloys with unusually high creep strength
Schneibel, J. H.; Liu, C. T.; Miller, M. K.; Mills, M. J.; Sarosi, P.; Heilmaier, M.; Sturm, D.
2009. Scripta Materialia, 61 (8), 793–796
Characterisation of microstructures, mechanical properties, and oxidation behaviour of coherent A2 + L21 (B2) Fe-Al-Ti
Krein, R.; Palm, M.; Heilmaier, M.
2009. Journal of Materials Research (JMR), 24 (11), 3412–3421
Creep Behavior and Damage of Ni-Base Superalloys PM 1000 and PM 3030
Nganbe, M.; Heilmaier, M.
2009. Metallurgical and Materials Transactions A, 40 (12), 2971–2979
Microstructure and mechanical properties of nanostructured Al-4Cu alloy produced by mechanical alloying and vacuum hot pressing
Shanmugasundaram, T.; Heilmaier, M.; Murty, B. S.; Subramanya Sarma, V.
2009. Metallurgical and Materials Transactions A, 40 (12), 2798–2801
2008
Superplasticity of multiphase Mo-Si-B alloys
Heilmaier, M.; Saage, H.; Jéhanno, P.; Böning, M.; Kestler, H.
2008. Mechanics & mechanisms of finite plastic deformation: The 14th International Symposium on Plasticity & its Current Applications, Kona, Hawaii, January 3-8, 2008; 1 CD-Rom. Ed.: A. S. Khan, 184–186, Neat Press
High temperature strength and failure of the Ni-base Superalloy PM 3030
Nganbe, M.; Heilmaier, M.
2008. Mechanics & mechanisms of finite plastic deformation: The 14th International Symposium on Plasticity & its Current Applications, Kona, Hawaii, January 3-8, 2008; 1 CD-Rom. Ed.: A.S. Khan, 151–153, Neat Press
Enhanced plasticity of mechanically alloyed Mo-based materials for high temperature applications
Krüger, M.; Saage, H.; Heilmaier, M.; Jéhanno, P.; Böning, M.
2008. Mechanics & mechanisms of finite plastic deformation: The 14th International Symposium on Plasticity & its Current Applications, Kona, Hawaii, January 3-8, 2008; 1 CD-Rom. Ed.: A.S. Khan, 193–195, Neat Press
Microstructure and mechanical properties of ultra fine grained Cu-Zn and Cu-Al alloys produced by cryorolling and annealing
Subramanya Sarma, V.; Sivaprasad, K.; Sturm, D.; Heilmaier, M.
2008. Materials Science and Engineering A, 489 (1-2), 253–258
High strength bulk nanostructured 2219, Al alloy produced by high energy ball milling and hot pressing
Shanmugasundaram, T.; Subramanya Sarma, V.; Murty, B. S.; Heilmaier, M.
2008. Materials Science Forum (MSF), 584-586, 97–101
Mechanically alloyed Mo-Si-B alloys with a continuous alpha-Mo matrix and improved mechanical properties
Krüger, M.; Franz, S.; Saage, H.; Heilmaier, M.; Schneibel, J. H.; Jéhanno, P.; Böning, M.; Kestler, H.
2008. Intermetallics, 16 (7), 933–941
Molybdenum alloys for high temperature applications in air
Jéhanno, P.; Böning, M.; Kestler, H.; Heilmaier, M.; Saage, H.; Krüger, M.
2008. Powder Metallurgy, 51 (2), 99–102
2007
Impact of additional gamma’ strengthening on the strength and fatigue behavior of oxide dispersion strengthened Ni-base superalloys
Nganbe, M.; Heilmaier, M.; Schaper, M.
2007. MS&T 2007: Proceedings from the Materials Science & Technology Conference "Exploring structure, processing and applications across multiple material systems", Detroit, Michigan, September 16-20, 2007; 1 CD-Rom, 251–262, ASM International
High temperature deformation behavior of a mechanically alloyed Mo-silicide alloy
Heilmaier, M.; Saage, H.; Jéhanno, P.; Böning, M.; Freudenberger, J.
2007. Advanced intermetallic-based alloys: Symposium, Boston, Massachusetts, November 27-30, 2006. Ed.: J. Wiezorek, 309–314, Materials Research Society
Current status and future trends of Mo-based silicide alloys for ultrahigh temperature applications
Heilmaier, M.; Saage, H.; Krüger, M.; Jehanno, P.; Böning, M.; Kestler, H.; Drawin, S.
2007. Current topics on high temperature materials: Memorial Symposium for the 50th Anniversary of the 123rd Committee on Heat-Resisting Materials and Alloys, 245–259, Japan Society for the Promotion of Science (JSPS)
Casting and Properties of Al-rich Ti-Al alloys
Paninski, M.; Schmitz, G. J.; Palm, M.; Stein, F.; Heilmaier, M.; Drevermann, A.; Engberding, N.; Saage, H.; Sturm, D.
2007. Ti-2007: science and technology. Proceedings of the 11th World Conference on Titanium (JIMIC 5), Kyoto, Japan, June 3-7, 2007; Vol. 2. Ed.: M. Niinomi, 1059–1062, Japan Institute of Metals
The influence of silicon on the strength and fracture toughness of molybdenum
Sturm, D.; Heilmaier, M.; Schneibel, J. H.; Jéhanno, P.; Skrotzki, B.; Saage, H.
2007. Materials Science and Engineering A, 463 (1-2), 107–114
Assessment of the high temperature deformation behavior of molybdenum silicide alloys
Jéhanno, P.; Heilmaier, M.; Saage, H.; Böning, M.; Kestler, H.
2007. Materials Science and Engineering A, 463 (1-2), 216–223
Characterization of the Microstructure of Al-rich TiAl-Alloys by Combined TEM Imaging Techniques
Kelm, K.; Irsen, S.; Paninski, M.; A. Drevermann; Schmitz, G. J.; Palm, M.; Stein, F.; Heilmaier, M.; Engberding, N.; Saage, H.; Sturm, D.
2007. Microscopy and Microanalysis, 13 (S03), 294–295
2006
Superplasticity of a refractory multiphase Mo-Si-B alloy
Jéhanno, P.; Heilmaier, M.; Saage, H.; Heyse, H.; Böning, M.; Kestler, H.; Schneibel, J. H.
2006. Scripta Materialia, 55 (6), 525–528
Ductility and impact resistance of powder-metallurgical molybdenum-rhenium alloys
Leichtfried, G.; Heilmaier, M.; Schneibel, J. H.
2006. Metallurgical and Materials Transactions A, 37 (10), 2955–2961
Assessment of the creep behaviour of a die-cast AlSi6Cu4-T6 alloy
Dehler, A.; Knirsch, S.; Srivastava, V.; Saage, H.; Heilmaier, M.
2006. International Journal of Materials Research, 97 (12), 1697–1705
2005
Strengthening mechanisms in mechanically alloyed nanostructured ODS metals
Heilmaier, M.; Saage, H.; Eckert, J.; Kudashov, D.; Martin, U.
2005. Dislocations, plasticity and metal forming: Proceedings of the Eleventh International Symposium on Plasticity and its Current Applications (PLASTICITY’05). Ed.: A. S. Khan, 481–483, Neat Press
Mechanical Behavior of Zr--Based Bulk Metallic Glasses: Processing for Properties
Heilmaier, M.
2005. Processing and fabrication of advanced materials XIII: Proceedings of the International Conference, Singapore, December 6 - 8, 2004. Vol. 2. Ed.: M. Gupta, 592–611, Stallion Press
High Temperature Deformation Mechanisms of Molybdenum Silicides with Molybdenum and Intermetallic Matrix
Jéhanno, P.; Heilmaier, M.; Saage, H.; Böning, M.; Venskutonis, A.; Knabl, W.
2005. Powder metallurgical high performance materials: Proceedings of the 16. International Plansee Seminar 2005, Reutte, Austria, May 30- June 03, 2005. Ed.: G. Kneringer, 841–855, Plansee Holding
Untersuchung der Partikelgrößenverteilung in oxiddispersionsverfestigten intermetallischen Legierungen mittels FIB
Saage, H.; Heilmaier, M.
2005. Fortschritte in der Metallographie: Vortragstexte der 39. Metallographie-Tagung, Erlangen, 14.-16. September 2005. Hrsg.: M. Göken, 255–260, Werkstoff-Informationsges
Assessment of a powder metallurgical (PM) processing route for refractory metal silicide alloys
Jéhanno, P.; Heilmaier, M.; Kestler, H.; Böning, M.; Venskutonis, A.; Bewlay, B.; Jackson, M.
2005. Metallurgical and Materials Transactions A, 36 (3), 515–523
On the Orowan stress in intermetallic ODS alloys and its superposition with grain size and solid solution hardening
Saage, H.; Heilmaier, M.; Eckert, J.
2005. Zeitschrift für Metallkunde, 96 (7), 801–804
Dependence of mechanical strength on grain structure in the gamma’ and oxide dispersion-strengthened nickelbase superalloy PM 3030
Nganbe, M.; Heilmaier, M.; Schultz, L.
2005. Zeitschrift für Metallkunde, 96 (6), 625–631
Elevated Temperature Deformation Behavior of Zr-Based Bulk Metallic Glasses
Heilmaier, M.; Eckert, J.
2005. Advanced Engineering Materials, 7 (9), 833–841
2004
Superplasticity in Zr-based bulk metallic glasses: a critical overview
Heilmaier, M.; Leonhard, A.
2004. Advances in superplasticity and superplastic forming: Proceedings of a symposium, Charlotte, North Carolina, USA, March 14-18, 2004. Ed.: E. M. Taleff, 233–244, TMS
A critical assessment of high temperature creep and fatigue of ODS Ni-base superalloys
Heilmaier, M.; Saage, H.; Nganbe, M.
2004. Processing and fabrication of advanced materials XII: Proceedings of the International Symposium, Pittsburgh, Pennsylvania, October 13-15, 2003. Ed.: T. S. Srivatsan, 199–218, ASM International
Novel dispersion strengthened metals by mechanical alloying
Martin, U.; Heilmaier, M.
2004. Advanced Engineering Materials, 6 (7), 515–520
Characterization of an industrially processed Mo-based silicide alloy
Jéhanno, P.; Heilmaier, M.; Kestler, H.
2004. Intermetallics, 12 (7-9), 1005–1009
Modelling of particle strengthening in the gamma’ and oxide dispersion strengthened nickelbase superalloy PM3030
Nganbe, M.; Heilmaier, M.
2004. Materials Science and Engineering A, 387-389, 609–612
Microstructure and Room Temperature Hardening Mechanisms of Ultra-Fine-Grained (UFG) ODS - Copper prepared by Mechanical Alloying (Cryomilling)
Kudashov, D. V.; Baum, H.; Martin, U.; Heilmaier, M.; Oettel, H.
2004. Materials Science and Engineering A, 387-389, 768–771
Creep behaviour of ultrafine - grained (UFG) ODS - Copper prepared by mechanical alloying (Cryomilling)
Kudashov, D. V.; Martin, U.; Heilmaier, M.; Oettel, H.
2004. Materials Science and Engineering A, 387-389, 639–642
2003
Free Volume Evolution in Bulk Metallic Glass during High Temperature Creep
Daniel, B. S. S.; Heilmaier, M.; Bartusch, B.; Kanzow, J.; Günther-Schade, K.; Rätzke, K.; Eckert, J.; Faupel, F.
2003. Supercooled liquids, glass transition and bulk metallic glasses: Symposium, Boston, Massachusetts, December 2 - 6, 2002. Ed.: T. Egami, 293–298, Materials Research Society
Supersaturated Solid Solution of Niobium in Copper by Mechanical Alloying
Botcharova, E.; Drew, G.; Heilmaier, M.; Schultz, L.; Kudashow, D.; Martin, U.
2003. Journal of Alloys and Compounds, 351 (1-2), 119–125
Creep properties of boron-doped dual-phase Ti-rich L12-based trialuminide intermetallics
Heilmaier, M.; Handtrack, D.; Varin, R. A.
2003. Scripta Materialia, 48 (10), 1409–1414
Oxide dispersion strengthened silver: manufacturing and properties
Grundmann, U.; Heilmaier, M.; Martin, U.; Oettel, H.; Schultz, L.
2003. Zeitschrift für Metallkunde, 94 (5), 587–592
2002
Novel oxide dispersion strengthened alloys produced by mechanical milling
Heilmaier, M.; Grundmann, U.; Saage, H.; Eckert, J.
2002. Processing and fabrication of advanced materials X: Proceedings of the International Symposium, Indianapolis, Indiana, November 5-8, 2001. Ed.: T. S. Srivatsan, 241–253, ASM International
Fatigue Life and Fatigue Crack Growth of ODS Nickel-Base Superalloy PM 1000
Schaper, M.; Böhm, A.; Heilmaier, M.; Klauss, H.-J.; Nganbe, M.
2002. Fatigue 2002: Proceedings of the Eighth International Fatigue Congress, Stockholm, Sweden, June 3-7, 2002; Vol. 5. Ed.: A. F. Blom, 3455–3462, EMAS
High-strength, high-nitrogen stainless steel-copper composite wires for conductors in pulsed high-field magnets
Grünberger, W.; Heilmaier, M.; Schultz, L.
2002. Materials Letters, 52 (3), 154–158
Superposition of Grain Size and Dispersion Strengthening in ODS L12-(Al,Cr)3Ti
Heilmaier, M.; Saage, H.; Mirpuri, K. J.; Eckert, J.; Schultz, L.; Singh, P.
2002. Materials Science and Engineering A, 329-331, 106–111
Microstructure and mechanical properties of Cu-Ag microcomposite wires for pulsed high-field magnets
Grünberger, W.; Heilmaier, M.; Schultz, L.
2002. Zeitschrift für Metallkunde, 93 (1), 58–65
Thermal Relaxation and High-Temperature Creep of Zr55Cu30Al10Ni5 Bulk Metallic Glass
Daniel, B. S. S.; Reger-Leonhard, A.; Heilmaier, M.; Eckert, J.; Schultz, L.
2002. Mechanics of Time-Dependent Materials, 6 (2), 193–206
A Unified Description of Creep in Pure and Dispersion Strengthened Copper
Heilmaier, M.; Kestler, H.; Gibeling, J. C.
2002. Zeitschrift für Metallkunde, 93 (7), 666–671
Fatigue behavior of duplex treated TiCxN1-x and Ti1-xAlxN hard coating steel compounds
Jaeger, G.; Endler, I.; Bartsch, K.; Heilmaier, M.; Leonhardt, A.
2002. Surface and Coatings Technology, 150 (2-3), 282–289
2001
On the high-temperature creep and relaxation behavior of Zr-based bulk metallic glasses
Daniel, B. S. S.; Heilmaier, M.; Reger-Leonhard, A.; Eckert, J.; Schultz, L.
2001. Supercooled liquid, bulk glassy, and nanocrystalline states of alloys: Symposium, Boston, Massachusetts, November 27-30, 2000. Ed.: A. Inoue, L10.7.1–6, Materials Research Society
Fatigue life and fatigue crack growth of the ODS nickel-base superalloy PM 1000
Schaper, M.; Böhm, A.; Heilmaier, M.; Klauss, H.-J.; Nganbe, M.
2001. Proceedings of the 15th International Plansee Seminar 2001 "Powder metallurgical high performance materials", Reutte, May 2001. Ed.: G. Kneringer, 94–108, Plansee Holding AG
Predicting the Mechanical Response of Cu-Based Micro- and Macrocomposites
Heilmaier, M.; Grünberger, W.; Gibeling, J. C.; Schultz, L.
2001. Modelling the performance of engineering structural materials II: Proceedings of a Symposium of the TMS fall meeting 2001, Indianapolis, Indiana, November 4-8, 2001. Ed.: D. R. Lesuer, 31–42, TMS
Mechanical alloying of ODS-Copper
Kudashov, D.; Heilmaier, M.; Martin, U.; Oettel, H.
2001. Proceedings of PM 2001 Congress & Exhibition, Acropolis Convention Centre, Nice, France, October 22-24, 2001; 1 CD-Rom, 20–25, European Powder Metallurgy Association (EPMA)
Development of high strength and high-conductivity conductor materials for pulsed high field magnets at Dresden
Grünberger, W.; Heilmaier, M.; Schultz, L.
2001. Physica B: Condensed Matter, 294-295, 643–647
Bulk nanostructured multicomponent alloys
Eckert, J.; Reger-Leonhard, A.; Weiss, B.; Heilmaier, M.; Schultz, L.
2001. Advanced Engineering Materials, 3 (1-2), 41–47
Nanostructured materials in multicomponent alloy systems
Eckert, J.; Reger-Leonhard, A.; Weiss, B.; Heilmaier, M.
2001. Materials Science and Engineering A, 301 (1), 1–11
High-strength pearlitic steel-copper composite wires for conductors in pulsed high-field magnets
Grünberger, W.; Heilmaier, M.; Schultz, L.
2001. Materials Science and Engineering A, 303 (1-2), 127–133
Bulk nanostructured Zr-based multiphase alloys with high strength and good ductility
Eckert, J.; Kühn, U.; Mattern, N.; Reger-Leonhard, A.; Heilmaier, M.
2001. Scripta Materialia, 44 (8-9), 1587–1590
Deformation behavior of Zr-based metallic glasses
Heilmaier, M.
2001. Journal of Materials Processing Technology, 117 (3), 374–380
Plastic anisotropy of textured ODS nickel-base alloy PM 1000
Heilmaier, M.; Nganbe, M.; Beckers, B.; Brokmeier, H.-G.; Tamm, R.; Oertel, C.-G.; Skrotzki, W.
2001. Materials Science and Engineering A, 319-321, 290–293
Order strengthening in the cast nickel-based superalloy IN 100 at room temperature
Heilmaier, M.; Leetz, U.; Reppich, B.
2001. Materials Science and Engineering A, 319-321, 375–378
2000
On the creep and superplastic behavior of the ODS nickel-based superalloy PM 3030
Heilmaier, M.; Nganbe, M.; Müller, F. E. H.
2000. Deformation, processing, and properties of structural materials: Proceedings of the Honorary Symposium for Oleg D. Sherby held at the 2000 TMS Annual Meeting, Nashville, Tennessee, March 14-16, 2000. Ed.: E. M. Taleff, 287–298, TMS
The effect of strain rate and temperature on the LCF behavior of the ODS nickel-base superalloy PM 1000
Heilmaier, M.; Nganbe, M.; Müller, F. E. H.; Schultz, L.
2000. Superalloys 2000: Proceedings of the 9. International Symposium on Superalloys, Seven Springs, PA., September 17-21, 2000. Ed.: T. M. Pollock, 593–600, TMS
Cyclic stress-strain response of the ODS nickel-base, superalloy PM 1000 under variable amplitude loading at high temperatures
Heilmaier, M.; Maier, H. J.; Nganbe, M.; Müller, F. E. H.; Jung, A.; Christ, H.-J.
2000. Materials Science and Engineering A, 281 (1-2), 37–44
Monotonic and cyclic high temperature deformation behavior of the ODS nickel-base superalloy PM 1000
Müller, F. E. H.; Nganbe, M.; Klauss, H.-J.; Heilmaier, M.
2000. Journal of advanced materials, 32 (1), 9–20
Newtonian flow of Zr55Cu30Al10Ni5 bulk metallic glassy alloys
Reger-Leonhard, A.; Heilmaier, M.; Eckert, J.
2000. Scripta Materialia, 43 (5), 459–464
High-temperature deformation behaviour of PM 2000 single crystals
Heilmaier, M.; Wunder, J.; Lee, J.-H.; Reppich, B.; Löw, U.
2000. Advanced Engineering Materials, 2 (6), 363–366
The synthesis and properties of Zr-based metallic glasses and glass-matrix composites
Heilmaier, M.; Eckert, J.
2000. JOM: The Journal of the Minerals, Metals & Materials Society, 52 (7), 43–47
Glass transition, viscosity of the supercooled liquid and crystallization behavior of Zr-Al-Cu-Ni-Fe metallic glasses
Eckert, J.; Kübler, A.; Reger-Leonhard, A.; Gebert, A.; Heilmaier, M.
2000. Materials Transactions, JIM, 41 (11), 1415–1422
A new method of determining strength and fracture toughness of thin hard coatings
Jaeger, G.; Endler, I.; Heilmaier, M.; Bartsch, K.; Leonhardt, A.
2000. Thin Solid Films, 377-378, 382–388
1999
Creep behavior of bulk amorphous and nanocrystalline Zr-base alloys
Leonhard, A.; Heilmaier, M.; Eckert, J.; Schultz, L.
1999. Creep behavior of advanced materials for the 21st century: Proceedings of the Symposium held at the 1999 TMS Annual Meeting, San Diego, California, February 28 - March 4, 1999. Ed.: R. S. Mishra, 41–50, TMS
Creep behavior of novel oxide-dispersion strengthened chromium based alloys
Janousek, M.; Heilmaier, M.; Köck, W.; Singer, R. F.
1999. Creep behavior of advanced materials for the 21st century: Proceedings of the Symposium held at the 1999 TMS Annual Meeting, San Diego, California, February 28 - March 4, 1999. Ed.: R. S. Mishra, 311–320, TMS
Particle threshold stresses in high temperature yielding and creep: a critical review
Heilmaier, M.; Reppich, B.
1999. Creep behavior of advanced materials for the 21st century: Proceedings of the Symposium held at the 1999 TMS Annual Meeting, San Diego, California, February 28 - March 4, 1999. Ed.: R. S. Mishra, 267–281, TMS
Microstructural evolution during mechanical milling and consolidation of ODS L12 -(Al,Cr)3Ti
Saage, H.; Heilmaier, M.; Eckert, J.; Schultz, L.
1999. High-temperature ordered intermetallic alloys VIII: Symposium, Boston, Massachusetts, November 30 - December 3, 1998. Ed.: E. P. George, Materials Research Society
Microstructural modelling of the creep behaviour of an ODS nickelbase alloy: dislocation motion versus void growth
Eisenmeier, G.; Heilmaier, M.; Reppich, B.
1999. Deformation induced microstructures analysis and relation to properties: Proceedings of the 20th Risø International Symposium on Materials Science, Roskilde, Denmark, 6 - 10 September 1999. Ed.: J. B. Bilde-Sørensen, 321–326, Riso National Laboratory
Deformation behavior of bulk amorphous Zr-Base alloys
Leonhard, A.; Heilmaier, M.; Eckert, J.; Schultz, L.
1999. Bulk metallic glasses: Symposium, Boston, Massachusetts, December 1-3, 1998. Ed.: W.L. Johnson, 137–142, Materials Research Society
Deformation behaviour of particle-strengthened alloys: a Voronoi mesh approach
Estrin, Y.; Arndt, S.; Heilmaier, M.; Bréchet, Y.
1999. Acta Materialia, 47 (2), 595–606
The role of grain structure in the creep and fatigue of ni-based superalloy PM 1000
Heilmaier, M.; Müller, F. E. H.
1999. JOM: The Journal of the Minerals, Metals & Materials Society, 51 (4), 23–27
Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio
Estrin, Y.; Heilmaier, M.; Drew, G.
1999. Materials Science and Engineering A, 272 (1), 163–173
1998
Manufacturing of oxide-dispersion-strengthened silver by mechanical alloying
Grundmann, U.; Heilmaier, M.; Schultz, L.
1998. Proceedings of the 1998 Powder Metallurgy World Congress & Exhibition, Granada, Spain, October 18 - 22, 1998; Vol. 3, 555–560, European Powder Metallurgy Ass
A microstructural model for primary and steady-state creep of particle strengthened superalloys
Heilmaier, M.
1998. Modeling the mechanical response of structural materials: Proceedings of a TMS Symposium, San Antonio, Texas, February 15-19, 1998. Ed.: E. M. Taleff, 137–144, TMS
A microstructurally based explanation for the high temperature LCF behaviour of the ODS nickel-base alloy PM 1000
Heilmaier, M.; Müller, F. E. H.
1998. Low cycle fatigue and elasto-plastic behaviour of materials: Fourth International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Garmisch-Partenkirchen, Germany, September 7-11, 1998. Ed.: K. T. Rie, 629–634, Elsevier
The influence of texture on the creep behaviour of the ods nickel-base alloy pm 1000
Heilmaier, M.; Müller, F. E. H.; Eisenmeier, G.; Reppich, B.
1998. Scripta Materialia, 39 (10), 1365–1370
Effect of crystalline precipitations on the mechanical behavior of bulk glass forming Zr-based alloys
Leonhard, A.; Xing, L. Q.; Heilmaier, M.; Gebert, A.; Eckert, J.; Schultz, L.
1998. Nanostructured Materials, 10 (5), 805–817
1997
Assessing the HAI-model and the composite model of high temperature creep for a solid solution nickel-base alloy
Heilmaier, M.; Reppich, B.
1997. Creep and fracture of engineering materials and structures: Proceedings of the 7. International Conferenc, Irvine, August 10-15, 1997. Ed.: J. C. Earthman, 39–48, TMS
High temperature deformation behaviour of the ODS nickel-base superalloy PM 1000
Heilmaier, M.; Müller, F. E. H.; Schultz, L.
1997. Plansee Proceedings / 14th International Plansee Seminar ’97, Reutte, Tirol, Austria, May 12-16, 1997. Ed.: G. Kneringer, 844–856, Plansee AG
Modelling the tertiary creep behaviour of an oxide dispersion strengthened nickel based alloy
Müller, F. E. H.; Heilmaier, M.; Schultz, L.
1997. Computational Materials Science, 9 (1-2), 85–91
Eine neue Methode zur Festigkeits- und Zähigkeitsbestimmung von dünnen Schichten
Jaeger, G.; Heilmaier, M.; Schaper, M.
1997. Materialwissenschaft und Werkstofftechnik, 28 (3), 124–130
High temperature deformation behaviour of mechanically alloyed microcrystalline ODS silver
Grundmann, U.; Heilmaier, M.; Schultz, L.
1997. Scripta Materialia, 37 (1), 103–109
On the microstructural origin of primary creep in nickel-base superalloys
Heilmaier, M.; Reppich, B.
1997. Materials Science and Engineering A, 234-236, 501–504
Deformation behaviour of oxide-dispersion-strengthened silver
Grundmann, U.; Gerner, M.; Heilmaier, M.; Martin, U.; Schultz, L.; Oettel, H.
1997. Materials Science and Engineering A, 234-236, 505–508
The influence of texture and grain structure on the high temperature low-cycle fatigue behaviour of the ODS nickel-based superalloy PM 1000
Müller, F. E. H.; Heilmaier, M.; Schultz, L.
1997. Materials Science and Engineering A, 234-236, 509–512
Formation of ODS L12-(Al,Cr)3Ti by mechanical alloying
Heilmaier, M.; Saage, H.; Eckert, J.
1997. Materials Science and Engineering A, 239-240, 652–657
1996
High temperature creep of microcrystalline TiC dispersion strengthened copper alloys
Weißgärber, T.; Sauer, C.; Püsche, W.; Müller, F. E. H.; Heilmaier, M.; Kieback, B. F.
1996. Deformation and fracture in structural PM materials: Proceedings of the International Conference, High Tatras, Slovakia, October 13-16, 1996; Vol. 2. Ed.: L. Parilák, 163–174, IMR-SAS Kosice
Influence of grain morphology and texture on the high temperature deformation behaviour of the ODS nickel-base superalloy PM1000
Müller, F. E. H.; Heilmaier, M.
1996. Deformation and fracture in structural PM materials: Proceedings of the International Conference, High Tatras, Slovakia, October 13-16, 1996; Vol. 2. Ed.: L. Parilák, 151–162, IMR-SAS Kosice
Creep lifetime prediction of oxide-dispersion-strengthened nickel-base superalloys: A micromechanically based approach
Heilmaier, M.; Reppich, B.
1996. Metallurgical and Materials Transactions A, 27 (12), 3861–3870
Application of the HAI-model to the creep behaviour of particle hardened nickel-base superalloys
Heilmaier, M.; Böhm, U.; Wunder, J.; Reppich, B.
1996. Computational Materials Science, 7 (1-2), 159–166
1995
Modelling the elevated temperature deformation of the oxide dispersion strengthened superalloy MA 754
Heilmaier, M.; Böhm, U.; Wunder, J.; Reppich, B.
1995. Euro PM ’95: Proceedings of the European Conference on Advanced PM Materials, Birmingham, October 23-25, 1995, 294–301, European Powder Metallurgy Association (EPMA)
1994
Micromechanical mdelling of the creep behaviour of superalloys. Part I: Single phase material
Heilmaier, M.; Wetzel, K.; Reppich, B.
1994. Strength of materials: fundamental physical aspects of the strength of crystalline materials. Proceedings of the 10th International Conference, Sendai, Japan, August 21-26, 1994. Ed.: H. Oikawa, 563–566, The Japan Institute of Metals
Micromechanical modelling of the creep behaviour of superalloys. Part II: Particle strengthened material
Heilmaier, M.; Wetzel, K.; Wunder, J.; Reppich, B.
1994. Strength of materials: fundamental physical aspects of the strength of crystalline materials. Proceedings of the 10th International Conference, Sendai, Japan, August 21-26, 1994. Ed.: H. Oikawa, 567–570, The Japan Institute of Metals
1993
Anomalous creep behaviour of the ODS nickelbase superalloy MA 754
Heilmaier, M.; Reppich, B.
1993. Creep and fracture of engineering materials and structures: Proceedings of the 5. International Conference, Swansea, UK, March 28 - April 2, 1993. Ed.: B. Wilshire, 231–244, Institute of Materials
1991
Verification of a microstructural concept for creep and creep rupture life time of ODS platinum based alloys
Reppich, B.; Heilmaier, M.; Schmidt, H.; Schossig, C.
1991. Strength of metals and alloys: Proceedings of the 9th International Conference on the Strength of Metals and Alloys, Haifa, Israel, July 14-19, 1991; Vol. 1. Ed.: D. G. Brandon, 405–412, Freund
1990
Microstructural modelling of the creep behaviour of particle-strengthened superalloys
Reppich, B.; Heilmaier, M.; Liebig, K.; Schumann, G.; Stein, K. D.; Woller, T.
1990. Steel research, 61 (6), 251–257
1988
Determination of the grain boundary diffusion coefficient of oxygen in Cr2O3
Sockel, H. G.; Saal, B.; Heilmaier, M.
1988. Surface and Interface Analysis, 12 (10), 531–533