Home | english  | Impressum | Datenschutz | Sitemap | KIT

Dr. Daniel Weygand

Akad. Oberrat
Raum: 106
Tel.: +49 721 608-48508
Fax: +49 721 608-44364
Daniel WeygandMug6∂kit edu

Geb. 30.48



Veröffentlichungen


2020
Recrystallisation towards a single texture component in heavily cold rolled tungsten (W) sheets and its impact on micromechanics.
Reiser, J.; Bonnekoh, C.; Karcher, T.; Pfleging, W.; Weygand, D.; Hoffmann, A.
2020. International journal of refractory metals & hard materials, 86, Article: 105084. doi:10.1016/j.ijrmhm.2019.105084
2019
Dislocation multiplication by cross-slip and glissile reaction in a dislocation based continuum formulation of crystal plasticity.
Sudmanns, M.; Stricker, M.; Weygand, D.; Hochrainer, T.; Schulz, K.
2019. Journal of the mechanics and physics of solids, 132, 103695
A gradient plasticity creep model accounting for slip transfer/activation at interfaces evaluated for the intermetallic NiAl-9Mo.
Albiez, J.; Erdle, H.; Weygand, D.; Böhlke, T.
2019. International journal of plasticity, 113, 291–311. doi:10.1016/j.ijplas.2018.10.006
DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale.
Roters, F.; Diehl, M.; Shanthraj, P.; Eisenlohr, P.; Reuber, C.; Wong, S. L.; Maiti, T.; Ebrahimi, A.; Hochrainer, T.; Fabritius, H.-O.; Nikolov, S.; Friák, M.; Fujita, N.; Grilli, N.; Janssens, K. G. F.; Jia, N.; Kok, P. J. J.; Ma, D.; Meier, F.; Werner, E.; Stricker, M.; Weygand, D.; Raabe, D.
2019. Computational materials science, 158, 420–478. doi:10.1016/j.commatsci.2018.04.030
The brittle-to-ductile transition in cold rolled tungsten plates: Impact of crystallographic texture, grain size and dislocation density on the transition temperature.
Bonnekoh, C.; Jäntsch, U.; Hoffmann, J.; Leiste, H.; Hartmaier, A.; Weygand, D.; Hoffmann, A.; Reiser, J.
2019. International journal of refractory metals & hard materials, 78, 146–163. doi:10.1016/j.ijrmhm.2018.09.010
2018
Discrete dislocation dynamics study of dislocation microstructure during cyclic loading.
El-Achkar, T.; Weygand, D.
2018. Fatigue of Materials at Very High Numbers of Loading Cycles. Ed.: H.-J. Christ, 395–416, Springer Fachmedien Wiesbaden, Wiesbaden. doi:10.1007/978-3-658-24531-3_18
Dislocation multiplication in stage II deformation of fcc multi-slip single crystals.
Stricker, M.; Sudmanns, M.; Schulz, K.; Hochrainer, T.; Weygand, D.
2018. Journal of the mechanics and physics of solids, 119, 319–333. doi:10.1016/j.jmps.2018.07.003
Discrete Dislocation Dynamics simulations of dislocation transport during sliding.
Gagel, J.; Weygand, D.; Gumbsch, P.
2018. Acta materialia, 156, 215–227. doi:10.1016/j.actamat.2018.06.002
2017
Characterization of Structural Irreversibilities of Low-Amplitude Fatigue using Discrete Dislocation Dynamics.
El-Achkar, T.; Weygand, D.
2017, Juli 5. 7th International Conference on Very High Cycle Fatigue (VHCF 2017), Dresden, Deutschland, 3.–5. Juli 2017
Irreversibility of dislocation motion under cyclic loading due to strain gradients.
Stricker, M.; Weygand, D.; Gumbsch, P.
2017. Scripta materialia, 129, 69–73. doi:10.1016/j.scriptamat.2016.10.029
2016
Non-quadratic defect energy: A comparison of gradient plasticity simulations to discrete dislocation dynamics results.
Bayerschen, E.; Stricker, M.; Weygand, D.; Böhlke, T.
2016. Proceedings in applied mathematics and mechanics, 16, 301–302. doi:10.1002/pamm.201610139
Validation of the applicability of a creep model for directionally solidified eutectics with a lamellar microstructure.
Albiez, J.; Sprenger, I.; Weygand, D.; Heilmaier, M.; Böhlke, T.
2016. Proceedings in applied mathematics and mechanics, 16, 297–298. doi:10.1002/pamm.201610137
Physically motivated model for creep of directionally solidified eutectics evaluated for the intermetallic NiAl-9Mo.
Albiez, J.; Sprenger, I.; Seemüller, C.; Weygand, D.; Heilmaier, M.; Böhlke, T.
2016. Acta materialia, 110, 377–385. doi:10.1016/j.actamat.2016.02.024
Formation of extended prismatic dislocation structures under indentation.
Gagel, J.; Weygand, D.; Gumbsch, P.
2016. Acta Materialia, 111 (1), 399–406. doi:10.1016/j.actamat.2016.04.002
2015
Equivalent plastic strain gradient plasticity with grain boundary hardening and comparison to discrete dislocation dynamics.
Bayerschen, E.; Stricker, M.; Wulfinghoff, S.; Weygand, D.; Böhlke, T.
2015. Proceedings of the Royal Society of London / A, 471 (2184), Art.Nr.:20150388. doi:10.1098/rspa.2015.0388
Stress and strain fluctuations in plastic deformation of crystals with disordered microstructure.
Kapetanou, O.; Weygand, D.; Zaiser, M.
2015. Journal of Statistical Mechanics: Theory and Experiment, (8), P08009. doi:10.1088/1742-5468/2015/08/P08009
Multiscale Simulation of Plasticity in bcc Metals.
Weygand, D.; Mrovec, M.; Hochrainer, T.; Gumbsch, P.
2015. Annual Review of Materials Research, 45 (1), 369–390. doi:10.1146/annurev-matsci-070214-020852
On slip transmission and grain boundary yielding.
Stricker, M.; Gagel, J.; Schmitt, S.; Schulz, K.; Weygand, D.; Gumbsch, P.
2015. Meccanica, 51 (2), 271–278. doi:10.1007/s11012-015-0192-2
2014
Internal length scale and grain boundary yield strength in gradient models of polycrystal plasticity: How do they relate to the dislocation microstructure?.
Zhang, X.; Aifantis, K. E.; Senger, J.; Weygand, D.; Zaiser, M.
2014. Journal of materials research, 29 (18), 2116–2128. doi:10.1557/jmr.2014.234
Origin of anomalous slip in tungsten.
Marichal, C.; Srivastava, K.; Weygand, D.; Van Petegem, S.; Grolimund, D.; Gumbsch, P.; Van Swygenhoven, H.
2014. Physical Review Letters, 113 (2), 025501. doi:10.1103/PhysRevLett.113.025501
Dislocation junctions as indicators of elementary slip planes in body-centered cubic metals.
Srivastava, K.; Weygand, D.; Gumbsch, P.
2014. Journal of Materials Science, 49 (20), 7333–7337. doi:10.1007/s10853-014-8447-1
Analysis of dislocation pile-ups using a dislocation-based continuum theory.
Schulz, K.; Dickel, D.; Schmitt, S.; Sandfeld, S.; Weygand, D.; Gumbsch, P.
2014. Modelling and Simulation in Materials Science and Engineering, 22 (2), 025008. doi:10.1088/0965-0393/22/2/025008
2013
Combining x-ray diffraction contrast tomography and mesoscale grain growth simulations in strontium titanate: An integrated approach for the investigation of microstructure evolution.
Syha, M.; Bäurer, M.; Rheinheimer, W.; Ludwig, W.; Lauridsen, E. M.; Weygand, D.; Gumbsch, P.
2013. Ceramic Engineering and Science Proceedings, 33 (10), 127–137
Three dimensional X-ray diffraction contrast tomography reconstruction of polycrystalline strontium titanate during sintering and electron backscatter diffraction validation.
Syha, M.; Rheinheimer, W.; Loedermann, B.; Graff, A.; Trenkle, A.; Baeurer, M.; Weygand, D.; Ludwig, W.; Gumbsch, P.
2013. Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME) : TMS ICME - manufacturing, design, materials ; held July 7 - 11, 2013 at Salt Lake Marriott Downtown at City Creek, Salt Lake City, Utah. Ed.: M. Li, 259–264, Wiley, Weinheim
Average yielding and weakest link statistics in micron-scale plasticity.
Ispánovity, P. D.; Hegyi, Á.; Groma, I.; Györgyi, G.; Ratter, K.; Weygand, D.
2013. Acta Materialia, 61, 6234–6245. doi:10.1016/j.actamat.2013.07.007
Validation of three-dimensional diffraction contrast tomography reconstructions by means of electron backscatter diffraction characterization.
Syha, M.; Trenkle, A.; Lödermann, B.; Graff, A.; Ludwig, W.; Weygand, D.; Gumbsch, P.
2013. Journal of Applied Crystallography, 46, 1145–1150. doi:10.1107/S002188981301580X
Ermüdungsmechanismen von Al und Cu (-Legierungen) in kleinen Volumina im VHCF-Bereich mittels Simulation und neuartiger uni- und multiaxialer Mikro-Ermüdungsversuche.
Eberl, C.; Weygand, D.; Senger, J.; Srivastava, K.; Straub, T.
2013. Berichtskolloquium des DFG-Schwerpunktprogramms 1466, Siegen, 4.-5.Juni 2013
Dislocation motion in tungsten: Atomistic input to Discrete Dislocation simulations.
Srivastava, K.; Gröger, R.; Weygand, D.; Gumbsch, P.
2013. International Journal of Plasticity, 47 (August), 126–142. doi:10.1016/j.ijplas.2013.01.014
Ermüdungsmechanismen von Al und Cu (-Legierungen) in kleinen Volumina im VHCF-Bereich mittels Simulation und neuartiger uni- und multiaxialer Mikro-Ermüdungsversuche.
Eberl, C.; Weygand, D.; Senger, J.; Srivastava, K.; Straub, T.
2013. Begutachtungskolloquium des DFG-Schwerpunktprogramms 1466, Bonn, 17. Januar 2013
Ermüdungsmechanismen von Al und Cu(-Legierungen) in kleinen Volumina im VHCF-Bereich mittels Simulation und neuartiger uni- und multiaxialer Mikro-Ermüdungsversuche.
Straub, T.; Senger, J.; Srivastava, K.; Eberl, C.; Weygand, D.
2013. Begutachtungskolloquium des DFG-Schwerpunktprogramms 1466, Bonn, 17. Januar 2013
Deformation and fracture of solids: tough nuts at atomic and continuum scales.
Gumbsch, P.; Mrovec, M.; Srivastava, K.; Weygand, D.
2013. Frühjahrstagung DPG, Sektion Kondensierte Materie, Symp.Computational Challengesin Scale-Bridging Modeling of Materials, Regensburg, 10.-15. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), SYMM 1.2
2012
Interface orientation distribution during grain growth in bulk SrTiO 3 measured by means of 3D X-ray diffraction contrast tomography.
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E. M.; Ludwig, W.; Weygand, D.; Gumbsch, P.
2012. Three-dimensional tomography of materials : November 28 - December 3, 2011, Boston, Massachusetts, USA ; [Symposium PP, Three-Dimensional Tomography of Materials ; held at 2011 MRS fall meeting]. Ed.: C. Larabell, 58–62, Cambridge Univ. Pr., New York (NY). doi:10.1557/opl.2012.831
Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography.
Syha, M.; Rheinheimer, W.; Baurer, M.; Lauridsen, E. M.; Ludwig, W.; Weygand, D.; Gumbsch, P.
2012. Scripta Materialia, 66 (1), 1–4. doi:10.1016/j.scriptamat.2011.08.005
Conditions for the Occurence of Abnormal Grain Growth studied by a 3D Vertex Dynamics Model.
Syha, M.; Weygand, D.
2012. Recrystallization and grain growth IV: Selected, peer reviewed papers from the Fourth International Conference on Recrystallization and Grain Growth (ReX & GG 2010), Sheffield, UK, July 4 - 9, 2010. Ed.: E. J. Palmiere, 563–567, Trans Tech Publ., Durnten-Zurich. doi:10.4028/www.scientific.net/MSF.715-716.563
Lifetime and crack initiation of fcc materials in small scale under multiaxial cyclic loading in the very high cycle fatigue regime.
Straub, T.; Kennerknecht, T.; Berwind, M. F.; Lapusta, Y.; Eberl, C.; Senger, J.; Weygand, D.
2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
2011
Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer sized specimens.
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.
2011. Acta materialia, 59 (8), 2937–2947. doi:10.1016/j.actamat.2011.01.034
Impact of gamma’ particles coarsening on the critical resolved shear stress of nickel-base superalloys with low aluminium and/or titanium content.
Ispanovity, P.; Bako, B.; Weygand, D.; Hoffelner, W.; Samaras, M.
2011. Journal of Nuclear Materials, 416 (1-2), 55–59. doi:10.1016/j.jnucmat.2010.11.051
Continuum modeling of dislocation plasticity: Theory, numerical implementation and comparison to discrete dislocation simulations.
Gumbsch, P.; Sandfeld, S.; Senger, J.; Weygand, D.; Hochrainer, T.
2011. Advances in Heterogeneous Material Mechanics 2011: Proceedings of the Third International Conference on Heterogeneous Material Mechanics, Shanghai, China, May 22-26, 2011. Ed.: J. Fan, 7–15, Destech Publications, Lancaster (PA)
Dislocation microstructure evolution in cyclically twisted microsamples : a discrete dislocation dynamics simulation.
Senger, J.; Weygand, D.; Kraft, O.; Gumbsch, P.
2011. Modelling and simulation in materials science and engineering, 19 (7), Art.Nr. 074004. doi:10.1088/0965-0393/19/7/074004
2010
Evolution of mechanical response and dislocation microstructures in small-scale specimens under slightly different loading conditions.
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.
2010. Philosophical Magazine, 90 (5), 617–628. doi:10.1080/14786430903213353
Cyclic response of copper single crystal micro-beams.
Kiener, D.; Motz, C.; Grosinger, W.; Weygand, D.; Pippan, R.
2010. Scripta Materialia, 63 (5), 500–503. doi:10.1016/j.scriptamat.2010.05.014
Plasticity in Confined Dimensions.
Kraft, O.; Gruber, P. A.; Mönig, R.; Weygand, D.
2010. Annual Review of Materials Research, 40, 293–317. doi:10.1146/annurev-matsci-082908-145409
Dislocation - grain boundary interaction in <111> textured thin metal films.
Bachurin, D. V.; Weygand, D.; Gumbsch, P.
2010. Acta Materialia, 58 (16), 5232–5241. doi:10.1016/j.actamat.2010.05.037
Submicron Plasticity: Yield Stress, Dislocation Avalanches, and Velocity Distribution.
Ispánovity, P. D.; Groma, I.; Györgyi, G.; Csikor, F. F.; Weygand, D.
2010. Physical Review Letters, 105 (8), 085503/1–4. doi:10.1103/PhysRevLett.105.085503
Modeling grain growth and related phenomena with vertex dynamics.
Lépinoux, J.; Weygand, D.; Verdier, M.
2010. Comptes Rendus Physique, 11 (3-4), 265–273. doi:10.1016/j.crhy.2010.07.015
Comparing grain growth experiments and simulations in 3D in N.
Syha, M.; Bäurer, M.; Hoffmann, M. J.; Lauridsen, E. M.; Ludwig, W.; Weygand, D.; Gumbsch, P.
2010. Challenges in materials science and possibilities in 3D and 4D characterization techniques - Proceedings of the 31st Risø International Symposium on Materials Science, Roskilde, Denmark, 6 - 10 September 2010. Ed.: N. Hansen, Risø National Laboratory for Sustainable Energy, Roskilde
A generalized vertex dynamics model for grain growth in three dimensions.
Syha, M.; Weygand, D.
2010. Modelling and Simulation in Materials Science and Engineering, 18 (1), 015010/1–19. doi:10.1088/0965-0393/18/1/015010
Atomistic simulation of dislocation-void interactions under cyclic loading.
Cheng, Y.; Bitzek, E.; Weygand, D.; Gumbsch, P.
2010. Modelling and Simulation in Materials Science and Engineering, 18 (2), 025006/1–11. doi:10.1088/0965-0393/18/2/025006
2009
Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity.
Motz, C.; Weygand, D.; Senger, J.; Gumbsch, P.
2009. Acta Materialia, 57 (6), 1744–1754
Grain growth anomaly on strontium titanate.
Bäurer, M.; Weygand, D.; Gumbsch, P.
2009. Scripta materialia, 61 (6), 584–587
Atomistic simulation of a dislocation shear loop interacting with grain boundaries in nanocrystalline aluminium.
Bitzek, E.; Brandl, C.; Weygand, D.; Derlet, P. M.; Van Swygenhoven, H.
2009. Modelling and Simulation in Materials Science and Engineering, 17 (5), 055008/1–8
Simulation of small-angle tilt grain boundaries and their response to stress.
Cheng, Y.; Weygand, D.; Gumbsch, P.
2009. Computational Materials Science, 45 (3), 783–787
The influence of Helium bubbles on the critical resolved shear stress of dispersion strengthened alloys.
Bako, B.; Samaras, M.; Weygand, D.; Chen, J.; Gumbsch, P.; Hoffelner, W.
2009. Journal of Nuclear Materials, 386-388, 112–114
Depinning transition of a dislocation line in ferritic oxide strengthened steels.
Bakó, B.; Zaiser, M.; Weygand, D.; Samaras, M.; Hoffelner, W.
2009. Journal of Nuclear Materials, 385 (2), 284–287
Comparison of mechanical behaviour of thin film simulated by discrete dislocation dynamics and continuum crystal plasticity.
Siska, F.; Weygand, D.; Forest, S.; Gumbsch, P.
2009. Computational Materials Science, 45 (3), 793–799
Discrete dislocation dynamics simulation and continuum modeling of plastic boundary layers in tricrystal micropillars.
Aifantis, K. E.; Senger, J.; Weygand, D.; Zaiser, M.
2009. IOP Conference Series: Materials Science and Engineering, 3 (1), 012025/1–6
Grain growth in Damascene interconnects.
Weygand, D.; Verdier, M.; Lepinoux, J.
2009. Modelling and Simulation in Materials Science and Engineering, 17 (6), 064005/1–11
Grain growth anomaly in strontium titanate.
Hoffmann, M. J.; Baurer, M.; Weygand, D.; Gumbsch, P.
2009. Scripta Materialia, 61 (6), 584–587
Evolution of identical initial dislocation microstructures under different loading conditions simulated with 3-D discrete dislocation dynamics.
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.
2009. Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Discrete dislocation dynamics study of the influence of boundary conditions in micro-samples.
Senger, J.; Weygand, D.; Kraft, O.; Gumbsch, P.
2009. Frühjahrstagung DPG, Fachverband Metall- und Materialphysik, Dresden, 22.-27.März 2009 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.44(2009) MM 4.4
2008
On the range of 3D dislocation pair correlations.
Csikor, F. F.; Groma, I.; Hochrainer, T.; Weygand, D.; Zaiser, M.
2008. Continuum models and discrete systems (CMDS 11): Proceedings of the International Symposium, Paris, July 30th - August 3rd 2007. Ed.: D. Jeulin, 271–276, Mines Paris ParisTech, Paris
Finite element simulations of the cyclic elastoplastic behaviour of copper thin films.
Siska, F.; Forest, S.; Gumbsch, P.; Weygand, D.
2008. Modelling and simulation in materials science and engineering, 15 (1), 217–238
Grain growth mechanisms in Bounded Geometries.
Weygand, D.; Verdier, M.; Lepinoux, J.
2008. Proceedings of the Fourth International Conference on Multiscale Materials Modeling, Tallahassee, Florida, United States, 27-31 October 2008. Ed.: A. El-Azab, Department of Scientific Computing, Tallahassee
Atomistic modeling of the interaction between dislocation and vacancy in tungsten.
Chen, Z.; Mrovec, M.; Weygand, D.; Gumbsch, P.
2008. Proceedings of the Fourth International Conference on Multiscale Materials Modeling, Tallahassee, Florida, United States, 27-31 October 2008. Ed.: A. El-Azab, 631–635, Department of Scientific Computing, Tallahassee
Discrete dislocation simulations of the plasticity of micro-pillars under uniaxial loading.
Senger, J.; Weygand, D.; Gumbsch, P.; Kraft, O.
2008. Scripta Materialia, 58 (7), 587–590. doi:10.1016/j.scriptamat.2007.11.031
Micro-bending tests: A comparison between three-dimensional discrete dislocation dynamics simulations and experiments.
Motz, C.; Weygand, D.; Senger, J.; Gumbsch, P.
2008. Acta Materialia, 56 (9), 1942–1955
Dislocation depinning transition in a dispersion-strengthened steel.
Bako, B.; Weygand, D.; Samaras, M.; Hoffelner, W.; Zaiser, M.
2008. Physical Review B, 78 (14), 144104/1–5
High Performance computing and discrete dislocation dynamics: Plasticity of micrometer sized specimens.
Weygand, D.; Senger, J.; Motz, C.; Augustin, W.; Heuveline, V.; Gumbsch, P.
2008. High Performance Computing in Science and Engineering ’08. Ed.: W.E. Nagel, 507–523, Springer, Berlin
Cyclic deformation and fatigue in confined dimensions.
Kraft, O.; Wang, D.; Senger, J.; Weygand, D.; Volkert, C. A.
2008. 14th International Symp.on Plasticity & its Current Applications (Plasticity 2008), Kona, Hawaii, January 3-8, 2008 Vortr.: Washington State University, Pullman, Wash., 26.Juli 2008
2007
Discrete dislocation dynamics simulations of dislocation interactions with Y2O3 particles in PM2000 single crystals.
Bakó, B.; Weygand, D.; Samaras, M.; Chen, J.; Pouchon, M. A.; Gumbsch, P.; Hoffelner, W.
2007. The philosophical magazine, 87 (24), 3645–3656
Dislocation Avalanches, Strain Bursts, and the Problem of Plastic Forming at the Micrometer Scale.
Csikor, F. F.; Motz, C.; Weygand, D.; Zaiser, M.; Zapperi, S.
2007. Science, 318 (5848), 251–254. doi:10.1126/science.1143719
Size effects in fatigue of metallic materials.
Wang, D.; Volkert, C.; Weygand, D.; Kraft, O.
2007. Size-dependent Materials Behaviour : Challenges in Miniaturisation and Experimental Characterisation ; SizeDepEn Workshop, Freiburg, March 15-16, 2007
Plasticity of thin polycrystalline metallic films: a discrete dislocation dynamics approach.
Senger, J.; Weygand, D.; Kraft, O.; Gumbsch, P.
2007. 71.Jahrestagung der Deutschen Physikalischen Gesellschaft und DPG Frühjahrstagung des Arbeitskreises Festkörperphysik, Fachverband Metall- und Materialphysik, Regensburg, 26.-30.März 2007 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.42(2007) MM 8.5
Investigation of the size dependent plasticity of micro-pillars by discrete dislocation dynamics.
Weygand, D.; Senger, J.; Kraft, O.; Gumbsch, P.
2007. 71.Jahrestagung der Deutschen Physikalischen Gesellschaft und DPG Frühjahrstagung des Arbeitskreises Festkörperphysik, Fachverband Metall- und Materialphysik, Regensburg, 26.-30.März 2007 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.42(2007) MM 2.5
Fatigue at the sub-micron and nano-scale.
Kraft, O.; Wang, D.; Weygand, D.; Volkert, C. A.
2007. 136th Annual Meeting and Exhibition of the Minerals, Metals and Materials Society (TMS 2007), Orlando, Fla., February 25 - March 1, 2007
2006
Size Effect in the Plastic response of sub-micrometer sized pillars: A three dimensional discrete dislocation dynamics study.
Weygand, D.
2006. Proceedings of MMM - Third International Conference Multiscale Materials Modeling, Freiburg, Germany, September 18 - 22, 2006. Ed.: P. Gumbsch, 244–248, Fraunhofer IRB Verl., Stuttgart
Size effects on deformation and fatigue of thin films and small structures: experiments and dislocation dynamics simulation.
Kraft, O.; Wang, D.; Eve, S.; Poignant, M.; Schwaiger, R.; Volkert, C.; Weygand, D.
2006. Vortr.: Chinese Academy of Science, Shenyang, ??. September 2006
Three dimensional discrete dislocation dynamics simulations on the deformation mechanisms in sub-micrometer sized pillars.
Weygand, D.; Poignant, M.; Kraft, O.; Gumbsch, P.
2006. 12th Internat.Symp.on Plasticity, Halifax, CDN, July 17-22, 2006
2005
Study of dislocation reactions and rearrangements under different loading conditions.
Weygand, D.; Gumbsch, P.
2005. Materials Science and Engineering: A, 400-401, 158–161
Inertial effects on dislocation damping under cyclic loading with ultra-high frequencies.
Walcker, A.; Weygand, D.; Kraft, O.
2005. Materials Science and Engineering: A, 400-401, 397–400. doi:10.1016/j.msea.2005.03.060
Inertial effects on dislocation damping under cyclic loading with ultra-high frequencies.
Walcker, A.; Weygand, D.; Kraft, O.
2005. Dislocation 2004 : Internat.Conf.on the Fundamentals of Plastic Deformation, La Colle-sur-Loup, F, September 13-17, 2004
2004
On the Nucleation of Abnormal Grain Growth: a 2D Vertex Simulation.
Weygand, D.; Lépinoux, J.; Bréchet, Y.
2004. Recrystallization and grain growth - Proceedings of the Second Joint International Conference on Recrystallization and Grain Growth, Annecy, France, 30th August - 3rd September 2004. Ed.: B. Bacroix, 1123–1126, Trans Tech Publ., Uetikon-Zürich
Simulating the topology of recrystallisation in stabilized ferritic stainless steels.
Sinclair, C. W.; Weygand, D.; Lépinoux, J.; Bréchet, Y.
2004. Recrystallization and grain growth - Proceedings of the Second Joint International Conference on Recrystallization and Grain Growth, Annecy, France, 30th August - 3rd September 2004. Ed.: B. Bacroix, 671–676, Trans Tech Publ., Uetikon-Zürich
Atomistic Study of Edge Dislocations in FCC Metals: Drag and Inertial Effects.
Bitzek, E.; Weygand, D.; Gumbsch, P.
2004. IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength: proceedings of the IUTAM symposium held in Osaka, Japan, 6 - 11 July 2003. Ed.: H. Kitagawa, 45–57, Kluwer Acad. Publ., Dordrecht
Veröffentlichungen
Titel Autor Quelle

Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME), edited by M. Li, C. Campbell, K. Thornton, E. Holm, P.
Gumbsch, John Willey & Sons, Inc., Hoboken, New Jersey, USA, 2013, pp 259-264

IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength (2003)

Modelling and Simulation in Materials Science and Engineering, 18, 1, 015010 (2010)

Phil Mag B. 78, Seiten 329-352 (1998)

Adv. Eng. Mater. 3, 67 (2001)

Modelling and Simulation in Materials Science and Engineering, 22(2) (2014), 025008

Acta Materialia, 59, (2011), 2937-2947

Mod. Sim. Mat. Sci. Eng. 10, 437 (2002)

Mesoscopic Dynamics of Fracture Process and Materials Strength, edited by H. Kitagawa and Y. Shibutani, (Kluwer Academic Publishers, Dordrecht, 2004), 45-57 (2004)

Proceeding if 4th Int. Conf. On multiscale materials modeling, ISBN 9780615247816, 631 (2008)

Modelling and Simulation in Materials Science and Engineering, 17, 055008 (2009)

Modelling and Simulation in Materials Science and Engineering, 18, (2010), 025006 1-11

 Acta Materialia, 61, (2013), 6234-6245 

Phil. Mag. B 75, Seiten 937-949 (1997)

NATO Summer school on cellular structures, editor N. Rivier J.F. Sadoc. (1997)

Acta Materialia, 61, (2013), 5664-5673

Proceedings of the 31st. Risø International Symposium on Materials Science (Technical University of Denmark, 2010), 138-140, ISSN 090079

Computational Materials Science, 45, 793 (2009)

Materials Science Forum,
Band 715, Seiten 563-567 (2012)

Proceedings of the 3rd International Conference on Heterogeneous Material Mechanics (ICHMM-2011) (DEStech Publications, 2011), 7-15

American Institute of Physics. AIP Conference Proceedings, Volume 1143, pp. 135-150 USA (2009)

Scipta Materialia 63, 500-503 (2010)

Journal of Nuclear Materials, 385, 284 (2009)

IOP Conference Series: Materials Science and Engineering, 012025 (2009)

 

WCCM V - Fifth World Congress on Computational Mechanics, On-line publication (ISBN 3-9501554-0-6) Paper-ID: 81259 (2002)

Philosophical Magazine, 87, 3645-3656 (2007)

Mat. Sci. Eng. A 309-310, 420 (2001)

Scripta Materialia, 58,  587 (2008)

Acta Materialia, 58, (2010), 5232-5241

Science 318, 251 (2007)

Phys. Rev. B, 78, 144104 (2008)

in Advances in mechanical behaviour, plasticity and damage, eds.: D. Miannay, P. Costa, D. Francois, A. Pineau, Proceeding of EUROMAT 2000 Topical, Tours, France, 293 (2000)

Journal of Materials Science 49 (2014), 7333-7337

Modelling and Simulation in Materials Science and Engineering, 19, (2011), 074004 1-16

International Journal of Plasticity, 47, (2013), 126–142

Advanced Engineering Materials, 3, 587-589 (2001)

Mod. Sim. Mat. Sci. Eng. 15, 217 (2007)

Scripta Mater, 61, 584 (2009)

Mod. Sim. Mat. Sci. Eng., 17, 064005 (2009)

Proceeding if 4th Int. Conf. On multiscale materials modeling, ISBN 9780615247816, 395 (2008)

High Performance Computing in Science and Engineering '08, Springer, 2009, Wolfgang E. Nagel, Dietmar B. Kröner, Michael M. Resch, 507-523 (2009)

J. of Nuclear Materials (2011)

Materials Science and Engineering A, 400-401, 397-400 (2005)

Acta Materialia 46, 6559 (1998)

Mat. Sci. Eng. A 292, 34 (2000)

Acta Materialia, 57, 1744-1754 (2009)

Phil. Mag. Lett. 73, Seiten 187–192 (1996)

Interface Science 9, 311 (2001)

Acta Materialia, 56, 1942 (2008)

Comptes Rendus Physique, 11, 265-273 (2010)

Mat. Sci. Eng A 234-236,  485 (1997)

Proceedings of ReX & GG 2 Annecy, France, Mater. Sci. Forum Vols. 467-470, 1123-1126 (2004)

Phil. Mag. B 80, 1987 (2000)

in Proceedings of the 11th International Symposium on Continuum Models and Discrete Systems, Dominique Jeulin and Samuel Forest (eds.), Mines ParisTech Les Presses, Paris, Seiten 271-276 (2007)

Physical Review Letters 113 (2014), 025501

Proceedings of Third International Conference on Grain Growth. ICGG-3 / Weiland, H. Adams, B.L.; Rollett, A.D.. - Warrendale, PA, USA, USA: TMS - Miner. Metals & Mater. Soc., xvii+727 p.201 (1998)

Annual Review of  Materials Research, Vol. 40, 293-317 (2010)

Interface Science 7, 285 (1999)

Proceedings of ReX & GG 2 Annecy, France, Mater. Sci. Forum Vols. 467-470, 671-676 (2004)

Computational Materials Science, 45, 783 (2009)

Proceedings of 3rd International Conference on Multiscale materials Modeling 244 (2006)

in Technical Proceedings of the 2002 International Conference on Computational Nanoscience, 271 (2002)

Phil. Mag. Lett. 76, Seiten 133-138 (1997)

Materials Science and Engineering A, 400-401, 158-161 (2005)

Phys. Rev. Lett., 085503, 105 (2010)

ICFRM-13 conference, Journal of Nuclear Materials, 386-388, 1 (2009)

ICFRM-13 conference, Journal of Nuclear Materials, 386-388, 112 (2009)

Phil. Mag. B 79, 703 (1999)

Mat. Sci. Eng A, 188, Seiten 483-484 (2008)

Scripta Materialia, 66, (2012), 1-4

Journal of Applied Crystallography, 46, (2013), 1145-1150

Acta Materialia 47, 961 (1999)