Forschung - Publikationen

2021

A two-dimensional phase-field study on dendritic growth competition under convective conditions.
Laxmipathy, V. P.; Wang, F.; Selzer, M.; Nestler, B.
2021. Computational materials science, 186, Art.-Nr.: 109964. doi:10.1016/j.commatsci.2020.109964

2020

Bad Nodes Considered Harmful: How to Find and Fix the Problem.
Seiz, M.; Hötzer, J.; Hierl, H.; Andersson, S.; Nestler, B.
2020. Sustained Simulation Performance 2018 and 2019 – Proceedings of the Joint Workshops on Sustained Simulation Performance, University of Stuttgart (HLRS) and Tohoku University, 2018 and 2019. Ed.: M. Resch, 123–130, Springer International Publishing, Cham. doi:10.1007/978-3-030-39181-2_11

Extreme Scale Phase-Field Simulation of Sintering Processes.
Hierl, H.; Hötzer, J.; Seiz, M.; Reiter, A.; Nestler, B.
2020. 2019 IEEE/ACM 10th Workshop on Latest Advances in Scalable Algorithms for Large-Scale Systems (ScalA), Denver, CO, USA, 18-18 Nov. 2019, 25–32, IEEE, Piscataway (NJ). doi:10.1109/ScalA49573.2019.00009

Computational modeling of syntaxial overgrowth cementation and fracture propagation in sedimentary rocks. Dissertation.
Prajapati, N.
2020, August 27. Karlsruhe. doi:10.5445/IR/1000122917

Skalenübergreifende Analyse makroporöser Membranen im Kontext digitaler Zwillinge. Dissertation.
Altschuh, P.
2020, August 26. Karlsruhe. doi:10.5445/IR/1000122904

Characterization of the Microstructure After Composite Peening of Aluminum.
Seitz, M.; Dürrschnabel, M.; Kauffmann, A.; Kurpiers, C.; Greiner, C.; Weidenmann, K. A.
2020. Advanced engineering materials. doi:10.1002/adem.202000575

Distinguishing interstitial and substitutional diffusion in grand-potential based phase-field model.
Kubendran Amos, P. G.; Nestler, B.
2020. Materialia, 12, Art. Nr.: 100820. doi:10.1016/j.mtla.2020.100820

Data-driven exploration and continuum modeling of dislocation networks.
Sudmanns, M.; Bach, J.; Weygand, D.; Schulz, K.
2020. Modelling and simulation in materials science and engineering, 28 (6), Art. Nr.: 065001. doi:10.1088/1361-651X/ab97ef

Automated Quantitative Analyses of Fatigue-Induced Surface Damage by Deep Learning.
Thomas, A.; Durmaz, A. R.; Straub, T.; Eberl, C.
2020. Materials, 13 (15), Article: 3298. doi:10.3390/ma13153298

Development of synthetic open porous structures for improved heat transfer.
August, A.; Jamshidi, F.; Kneer, A.; Wolf, R. H.; Wirtz, M.; Nestler, B.
2020. International journal of heat and mass transfer, 159, Article No.120071. doi:10.1016/j.ijheatmasstransfer.2020.120071

Influence of topological structure and chemical segregation on the thermal and mechanical properties of Pd–Si nanoglasses.
Nandam, S. H.; Adjaoud, O.; Schwaiger, R.; Ivanisenko, Y.; Chellali, M. R.; Wang, D.; Albe, K.; Hahn, H.
2020. Acta materialia, 193, 252–260. doi:10.1016/j.actamat.2020.03.021

Tribological performance and microstructural evolution of α-brass alloys as a function of zinc concentration.
Liu, Z.; Messer-Hannemann, P.; Laube, S.; Greiner, C.
2020. Friction. doi:10.1007/s40544-019-0345-8

Einfluss laserinduzierter Veränderungen der lokalen Materialchemie auf das tribologische Verhalten von Ti6Al4V. Dissertation.
Kümmel, D.
2020, Juni 26. Karlsruhe. doi:10.5445/IR/1000120420

Elementare Ermüdungsmechanismen in Metallen zur Lebensdauervorhersage mittels Versetzungsdynamiksimulation. Dissertation.
El-Achkar, T.
2020, Juni 18. Karlsruhe. doi:10.5445/IR/1000120240

Microstructural changes in CoCrFeMnNi under mild tribological load.
Dollmann, A.; Kauffmann, A.; Heilmaier, M.; Haug, C.; Greiner, C.
2020. Journal of materials science, 55 (26), 12353–12372. doi:10.1007/s10853-020-04806-0

Morphological stability of rod-shaped continuous phases.
Wang, F.; Tschukin, O.; Leisner, T.; Zhang, H.; Nestler, B.; Selzer, M.; Cadilha Marques, G.; Aghassi-Hagmann, J.
2020. Acta materialia, 192, 20–29. doi:10.1016/j.actamat.2020.04.028

Model-free Adaptive Optimal Control of Episodic Fixed-horizon Manufacturing Processes Using Reinforcement Learning.
Dornheim, J.; Link, N.; Gumbsch, P.
2020. International journal of control, automation, and systems, 18 (5). doi:10.1007/s12555-019-0120-7

Weakly supervised one shot segmentation.
Raza, H.; Ravanbakhsh, M.; Klein, T.; Nabi, M.
2020. 2019 IEEE/CVF International Conference on Computer Vision Workshop (ICCVW), 1401–1406, IEEE, Piscataway (NJ). doi:10.1109/ICCVW.2019.00176

Modellierung mehrkomponentiger Materialsysteme für die Phasenfeldmethode und Analyse der simulierten Mikrostrukturen. Dissertation.
Kellner, M.
2020, Mai 20. Karlsruhe. doi:10.5445/IR/1000119330

Surface engineering of a titanium alloy for tribological applications by nanosecond-pulsed laser.
Kümmel, D.; Linsler, D.; Schneider, R.; Schneider, J.
2020. Tribology international, 150, Article no: 106376. doi:10.1016/j.triboint.2020.106376

Brittle anisotropic fracture propagation in quartz sandstone: insights from phase-field simulations.
Prajapati, N.; Herrmann, C.; Späth, M.; Schneider, D.; Selzer, M.; Nestler, B.
2020. Computational geosciences, 24, 1361–1376. doi:10.1007/s10596-020-09956-3

On counting cells in open pore foams.
August, A.; Nestler, B.
2020. Engineering Research Express, 2 (2), Art. Nr.: 025029. doi:10.1088/2631-8695/ab8c94

Nondestructive evaluation of 3D microstructure evolution in strontium titanate.
Trenkle, A.; Syha, M.; Rheinheimer, W.; Callahan, P. G.; Nguyen, L.; Ludwig, W.; Lenthe, W.; Echlin, M. P.; Pollock, T. M.; Weygand, D.; Graef, M.; Hoffmann, M. J.; Gumbsch, P.
2020. Journal of applied crystallography, 53, 349–359. doi:10.1107/S160057672000093X

Numerical and Experimental Characterization of Elastic Properties of a Novel, Highly Homogeneous Interpenetrating Metal Ceramic Composite.
Horny, D.; Schukraft, J.; Weidenmann, K. A.; Schulz, K.
2020. Advanced engineering materials. doi:10.1002/adem.201901556

Analysis of single crystalline microwires under torsion using a dislocation-based continuum formulation.
Zoller, K.; Schulz, K.
2020. Acta materialia, 191, 198–210. doi:10.1016/j.actamat.2020.03.057

Pattern formation during deformation of metallic nanolaminates.
Gola, A.; Schwaiger, R.; Gumbsch, P.; Pastewka, L.
2020. Physical review materials, 4 (1), Art.-Nr. 013603. doi:10.1103/PhysRevMaterials.4.013603

A continuum damage mechanics model for fatigue and degradation of fiber reinforced materials.
Hohe, J.; Gall, M.; Fliegener, S.; Hamid, Z. M. A.
2020. Journal of composite materials. doi:10.1177/0021998320904142

Synergistic effects of antiwear and friction modifier additives.
Eickworth, J.; Aydin, E.; Dienwiebel, M.; Rühle, T.; Wilke, P.; Umbach, T. R.
2020. Industrial lubrication & tribology. doi:10.1108/ILT-07-2019-0293

A phase-field study on polymerization-induced phase separation occasioned by diffusion and capillary flow—a mechanism for the formation of porous microstructures in membranes.
Wang, F.; Ratke, L.; Zhang, H.; Altschuh, P.; Nestler, B.
2020. Journal of sol gel science and technology, 94 (1). doi:10.1007/s10971-020-05238-7

Morphological characterization and photocatalytic efficiency measurements of pure silica transparent open‐cell sponges coated with TiO₂.
Löffler, F. B.; Altermann, F. J.; Bucharsky, E. C.; Schell, K. G.; Vera, M. L.; Traid, H.; Dwojak, A.; Litter, M. I.
2020. International journal of applied ceramic technology, 17 (4), 1930–1939. doi:10.1111/ijac.13504

Discrete and continuum modelling of size effects in architectured unstable metamaterials.
Findeisen, C.; Forest, S.; Hohe, J.; Gumbsch, P.
2020. Continuum mechanics and thermodynamics, 32 (2). doi:10.1007/s00161-020-00870-8

Chemomechanische Modellierung der Wärmebehandlung von Stählen mit der Phasenfeldmethode. Dissertation.
Schoof, E.
2020, April 1. Karlsruhe. doi:10.5445/IR/1000117917

Fundamentals of lubricated friction in deep drawing of zinc coated sheet metal considering contacting surface morphology and chemistry. Dissertation.
Rakotomahefa, M.
2020, März 19. Karlsruhe. doi:10.5445/IR/1000117585

Influence of stress-free transformation strain on the autocatalytic growth of bainite: A multiphase-field analysis.
Schoof, E.; Kubendran Amos, P. G.; Schneider, D.; Nestler, B.
2020. Materialia, 9, Article: 100620. doi:10.1016/j.mtla.2020.100620

Interface tracking characteristics of color-gradient lattice Boltzmann model for immiscible fluids.
Subhedar, A.; Reiter, A.; Selzer, M.; Varnik, F.; Nestler, B.
2020. Physical review / E, 101 (1), Article: 013313. doi:10.1103/PhysRevE.101.013313

Early deformation mechanisms in the shear affected region underneath a copper sliding contact.
Haug, C.; Ruebeling, F.; Kashiwar, A.; Gumbsch, P.; Kübel, C.; Greiner, C.
2020. Nature Communications, 11 (1), Art.-Nr. 839. doi:10.1038/s41467-020-14640-2

Effect of Environment on Microstructure Evolution and Friction of Au–Ni Multilayers.
Cihan, E.; Jungjohann, K.; Argibay, N.; Chandross, M.; Dienwiebel, M.
2020. Tribology letters, 68 (1), Art. Nr.: 30. doi:10.1007/s11249-019-1245-9

About the surface area to volume relations of open cell foams.
August, A.; Nestler, B.
2020. Engineering Research Express, 2 (1), Article No.015021. doi:10.1088/2631-8695/ab6ac6

Microstructural coarsening of multicomponent multiphase polycrystalline materials. Dissertation.
Perumal, R.
2020. Karlsruhe. doi:10.5445/IR/1000105110

The non-steady-state growth of divergent pearlite in Fe–C–Mn steels: a phase-field investigation [in press].
Mushongera, L. T.; Amos, P. G. K.; Schoof, E.; Kumar, P.; Nestler, B.
2020. Journal of materials science. doi:10.1007/s10853-019-04307-9

Limitations of preserving volume in Allen-Cahn framework for microstructural analysis.
Kubendran Amos, P. G.; Schoof, E.; Santoki, J.; Schneider, D.; Nestler, B.
2020. Computational materials science, 173, Article No.109388. doi:10.1016/j.commatsci.2019.109388

Entwicklung einer Kontinuumsbeschreibung für die Versetzungsmobilität in Versetzungsnetzwerken. Dissertation.
Sudmanns, M.
2020. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000100534

Phase-field study of eutectic colony formation in NiAl-34Cr.
Kellner, M.; Hötzer, J.; Schoof, E.; Nestler, B.
2020. Acta materialia, 182, 267–277. doi:10.1016/j.actamat.2019.10.028

Recrystallisation towards a single texture component in heavily cold rolled tungsten (W) sheets and its impact on micromechanics.
Reiser, J.; Bonnekoh, C.; Karcher, T.; Pfleging, W.; Weygand, D.; Hoffmann, A.
2020. International journal of refractory metals & hard materials, 86, Article: 105084. doi:10.1016/j.ijrmhm.2019.105084

A Stochastic Study of Flow Anisotropy and Channelling in Open Rough Fractures.
Marchand, S.; Mersch, O.; Selzer, M.; Nitschke, F.; Schoenball, M.; Schmittbuhl, J.; Nestler, B.; Kohl, T.
2020. Rock mechanics and rock engineering, 53, 233–249. doi:10.1007/s00603-019-01907-4

2019

Application of Gaussian process autoregressive models for capturing the time evolution of microstructure statistics from phase-field simulations for sintering of polycrystalline ceramics.
Yabansu, Y. C.; Rehn, V.; Hötzer, J.; Nestler, B.; Kalidindi, S. R.
2019. Modelling and simulation in materials science and engineering, 27 (8), Art.-Nr. 084006. doi:10.1088/1361-651X/ab413e

Influence of melt convection on the morphological evolution of seaweed structures: Insights from phase-field simulations.
Pavan Laxmipathy, V.; Wang, F.; Selzer, M.; Nestler, B.; Ankit, K.
2019. Computational materials science, 170, Art.-Nr. 109196. doi:10.1016/j.commatsci.2019.109196

Structural and elastic properties of amorphous carbon from simulated quenching at low rates.
Jana, R.; Savio, D.; Deringer, V. L.; Pastewka, L.
2019. Modelling and simulation in materials science and engineering, 27 (8), Art.-Nr. 085009. doi:10.1088/1361-651X/ab45da

Dislocation multiplication by cross-slip and glissile reaction in a dislocation based continuum formulation of crystal plasticity.
Sudmanns, M.; Stricker, M.; Weygand, D.; Hochrainer, T.; Schulz, K.
2019. Journal of the mechanics and physics of solids, 132, Art. Nr.: 103695. doi:10.1016/j.jmps.2019.103695

Correction to: Fatigue assessment of the welded joints containing process relevant imperfections.
Javaheri, E.; Hemmesi, K.; Tempel, P.; Fenzl, R.; Farajian, M.
2019. Welding in the world, 63 (6), 1903. doi:10.1007/s40194-019-00782-5

Phase-Field Study of Electromigration-Induced Shape Evolution of a Transgranular Finger-Like Slit.
Santoki, J.; Mukherjee, A.; Schneider, D.; Selzer, M.; Nestler, B.
2019. Journal of electronic materials, 48 (1), 182–193. doi:10.1007/s11664-018-6619-5

Code generation for massively parallel phase-field simulations.
Bauer, M.; Hötzer, J.; Ernst, D.; Hammer, J.; Seiz, M.; Hierl, H.; Hönig, J.; Köstler, H.; Wellein, G.; Nestler, B.; Rüde, U.
2019. SC ’19: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis, Art.-Nr.: a59, ACM, New York (NY). doi:10.1145/3295500.3356186

Probabilistic fracture mechanics framework including crack nucleation of rotor forging flaws.
Radaelli, F.; Kadau, K.; Amann, C.; Gumbsch, P.
2019. ASME Turbo Expo 2019 : Turbomachinery Technical Conference and Exposition, Phoenix, AZ, June 17-21, 2019, American Society of Mechanical Engineers (ASME), New York (NY). doi:10.1115/GT2019-90418

Solid solution strengthening and deformation behavior of single-phase Cu-base alloys under tribological load.
Laube, S.; Kauffmann, A.; Ruebeling, F.; Freudenberger, J.; Heilmaier, M.; Greiner, C.
2019. Acta materialia. doi:10.1016/j.actamat.2019.12.005

Fatigue assessment of the welded joints containing process relevant imperfections.
Javaheri, E.; Hemmesi, K.; Tempel, P.; Farajian, M.
2019. Welding in the world, 63 (2), 249–261. doi:10.1007/s40194-018-00676-y

On the Characterization and Modeling of Interfaces in Fiber Reinforced Polymer Structures. Dissertation.
Schober, M.
2019. Karlsruhe. doi:10.5445/IR/1000100455

Droplets on chemically patterned surface: A local free-energy minima analysis.
Wu, Y.; Wang, F.; Selzer, M.; Nestler, B.
2019. Physical review / E, 100 (4), Article No.041102. doi:10.1103/PhysRevE.100.041102

A bottom-up continuum approach of crystal plasticity for the analysis of fcc microwires under torsion [in press].
Zoller, K.; Schulz, K.
2019. Proceedings in applied mathematics and mechanics, 19 (1)

Entwicklung einer Kontinuumsbeschreibung für die Versetzungsmobilität in Versetzungsnetzwerken. Dissertation.
Sudmanns, M.
2019. Karlsruhe. doi:10.5445/IR/1000100071

Role of conductivity on the electromigration-induced morphological evolution of inclusions in {110}-oriented single crystal metallic thin films.
Santoki, J.; Mukherjee, A.; Schneider, D.; Nestler, B.
2019. Journal of applied physics, 126 (16), Article No.165305. doi:10.1063/1.5119714

Understanding the influence of neighbours on the spheroidization of finite 3-dimensional rods in a lamellar arrangement: Insights from phase-field simulations.
Mittnacht, T.; Amos, P. G. K.; Schneider, D.; Nestler, B.
2019. Proceedings of the 1st International Conference on Numerical Modelling in Engineering : NME 2018, 28-29 August 2018, Ghent, Belgium. Ed.: M. Abdel Wahab, 290–299, Springer, Singapore. doi:10.1007/978-981-13-2273-0_23

Structure evolution in tribological interfaces studied by multilayer model alloys. Dissertation.
Cihan, E.
2019. Karlsruhe. doi:10.5445/IR/1000099513

Tailoring the characteristic length scale of 3D chiral mechanical metamaterials.
Ziemke, P.; Frenzel, T.; Wegener, M.; Gumbsch, P.
2019. Extreme mechanics letters, 32, Article no: 100553. doi:10.1016/j.eml.2019.100553

Glass formation by severe plastic deformation of crystalline Cu|Zr nano-layers.
Li, S.; Pastewka, L.; Gumbsch, P.
2019. Acta materialia, 165, 577–586. doi:10.1016/j.actamat.2018.11.045

Post-buckling and dynamic response of angled struts in elastic lattices.
Wehmeyer, S.; Zok, F. W.; Eberl, C.; Gumbsch, P.; Cohen, N.; McMeeking, R. M.; Begley, M. R.
2019. Journal of the mechanics and physics of solids, 133, 103693. doi:10.1016/j.jmps.2019.103693

Phase-field investigation on the growth orientation angle of aluminum carbide with a needle-like structure at the surface of graphite particles.
Cai, Y.; Wang, F.; Selzer, M.; Nestler, B.
2019. Modelling and simulation in materials science and engineering, 27 (6), Art.-Nr.: 065010. doi:10.1088/1361-651X/ab2351

Comparison of K-doped and pure cold-rolled tungsten sheets: As-rolled condition and recrystallization behaviour after isochronal annealing at different temperatures.
Lied, P.; Bonnekoh, C.; Pantleon, W.; Stricker, M.; Hoffmann, A.; Reiser, J.
2019. International journal of refractory metals & hard materials, 85, 105047. doi:10.1016/j.ijrmhm.2019.105047

Reaction and characterisation of a two-stage thermoset using molecular dynamics.
Schwab, F. K.; Denniston, C.
2019. Polymer chemistry, 10 (32), 4413–4427. doi:10.1039/c9py00521h

Data-driven crack assessment based on surface measurements.
Schulz, K.; Kreis, S.; Trittenbach, H.; Böhm, K.
2019. Engineering fracture mechanics, 218, Article no: 106552. doi:10.1016/j.engfracmech.2019.106552

Message from the Editorial Chairman.
Dienwiebel, M.
2019. Wear, (Part A), 426–427. doi:10.1016/j.wear.2019.04.010

Progress Report on Phase Separation in Polymer Solutions.
Wang, F.; Altschuh, P.; Ratke, L.; Zhang, H.; Selzer, M.; Nestler, B.
2019. Advanced materials, 1806733. doi:10.1002/adma.201806733

Solids Under Extreme Shear: Friction-Mediated Subsurface Structural Transformations.
Greiner, C.; Gagel, J.; Gumbsch, P.
2019. Advanced materials, 31 (26), Art.Nr.: 1806705. doi:10.1002/adma.201806705

Curing Simulations of a Fibre-Reinforced Thermoset on a Micro- and Nano-Scale. Dissertation.
Schwab, F. K.
2019. Karlsruhe. doi:10.5445/IR/1000096963

Surface flaws control strain localization in the deformation of Cu|Au nanolaminate pillars.
Gola, A.; Zhang, G.-P.; Pastewka, L.; Schwaiger, R.
2019. MRS communications, 9 (3), 1067–1071. doi:10.1557/mrc.2019.93

Theoretical and numerical investigations of rod growth of an Ni–Zr eutectic alloy.
Enugala, S. N.; Kellner, M.; Kobold, R.; Hötzer, J.; Kolbe, M.; Nestler, B.; Herlach, D.
2019. Journal of materials science, 54 (19), 12605–12622. doi:10.1007/s10853-019-03802-3

New Twists of 3D Chiral Metamaterials.
Fernandez-Corbaton, I.; Rockstuhl, C.; Ziemke, P.; Gumbsch, P.; Albiez, A.; Schwaiger, R.; Frenzel, T.; Kadic, M.; Wegener, M.
2019. Advanced materials, 31 (26), Article No.1807742. doi:10.1002/adma.201807742

Die tribologischen Eigenschaften Silicium-basierter Keramiken in Isooctan unter Berücksichtigung der Umgebungsatmosphäre. Dissertation.
Schreiber, P. J.
2019. Karlsruhe. doi:10.5445/IR/1000096643

Electric field-induced directed assembly of diblock copolymers and grain boundary grooving in metal interconnects. Dissertation.
Mukherjee, A.
2019. Karlsruhe. doi:10.5445/IR/1000096625

Formation of the third bodies of steel sliding against brass under lubricated conditions.
Liu, L.; Sheng, Y.; Liu, M.; Dienwiebel, M.; Zhang, Z.; Dastan, D.
2019. Tribology international, 140, Article no: 105727. doi:10.1016/j.triboint.2019.04.011

Investigation of Equilibrium Droplet Shapes on Chemically Striped Patterned Surfaces Using Phase-Field Method.
Wu, Y.; Wang, F.; Selzer, M.; Nestler, B.
2019. Langmuir, 35 (25), 8500–8516. doi:10.1021/acs.langmuir.9b01362

Mesoscale Simulation of Dislocation Microstructures at Internal Interfaces.
Schulz, K.; Sudmanns, M.
2019. High Performance Computing in Science and Engineering’18 : Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2018. Ed.: W.E. Nagel, 115–129, Springer, Cham. doi:10.1007/978-3-030-13325-2_7

A mesoscale continuum approach of dislocation dynamics and the approximation by a Runge-Kutta discontinuous Galerkin method.
Schulz, K.; Wagner, L.; Wieners, C.
2019. International journal of plasticity, 120, 248–261. doi:10.1016/j.ijplas.2019.05.003

Investigation of the microstructure adjustment by velocity variations during the directional solidification of Al-Ag-Cu with the phase-field method.
Hötzer, J.; Kellner, M.; Kunz, W.; Nestler, B.
2019. Joint 5th International Conference on Advances in Solidification Processes (ICASP-5) & 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5) 17–21 June 2019, Salzburg, Austria, Article No.012007, Institute of Physics Publishing. doi:10.1088/1757-899X/529/1/012007

Impact of in situ nanomechanics on physical metallurgy.
Kacher, J.; Kirchlechner, C.; Michler, J.; Polatidis, E.; Schwaiger, R.; Van Swygenhoven, H.; Taheri, M.; Legros, M.
2019. MRS bulletin, 44 (6), 465–470. doi:10.1557/mrs.2019.124

Insights into tribology from in situ nanoscale experiments.
Jacobs, T. D. B.; Greiner, C.; Wahl, K. J.; Carpick, R. W.
2019. MRS bulletin, 44 (6), 478–486. doi:10.1557/mrs.2019.122

Low friction of metallic multilayers by formation of a shear-induced alloy.
Cihan, E.; Störmer, H.; Leiste, H.; Stüber, M.; Dienwiebel, M.
2019. Scientific reports, 9 (1), 9480. doi:10.1038/s41598-019-45734-7

Phase-field study of grain growth in porous polycrystals.
Rehn, V.; Hötzer, J.; Rheinheimer, W.; Seiz, M.; Serr, C.; Nestler, B.
2019. Acta materialia, 174, 439–449. doi:10.1016/j.actamat.2019.05.059

Scratching Cu|Au nanolaminates.
Gola, A.; Pastewka, L.
2019. Lubricants, 7 (5), Art. Nr.: 44. doi:10.3390/lubricants7050044

Multiphase-Field Modeling and Simulation of Martensitic Phase Transformation in Heterogeneous Materials.
Schoof, E.; Herrmann, C.; Schneider, D.; Hötzer, J.; Nestler, B.
2019. High Performance Computing in Science and Engineering ’18. Ed.: W. Nagel, 475–488, Springer International Publishing, Cham, CH. doi:10.1007/978-3-030-13325-2_30

Understanding the volume-diffusion governed shape-instabilities in metallic systems. Dissertation.
Kubendran Amos, P. G.
2019. Karlsruhe. doi:10.5445/IR/1000095355

Non-Arrhenius grain growth in strontium titanate: Quantification of bimodal grain growth.
Rheinheimer, W.; Schoof, E.; Selzer, M.; Nestler, B.; Hoffmann, M. J.
2019. Acta materialia, 174, 105–115. doi:10.1016/j.actamat.2019.05.040

Phase-field study on the growth of magnesium silicide occasioned by reactive diffusion on the surface of Si-foams.
Wang, F.; Altschuh, P.; Matz, A. M.; Heimann, J.; Matz, B. S.; Nestler, B.; Jost, N.
2019. Acta materialia, 170, 138–154. doi:10.1016/j.actamat.2019.03.008

Analysis of dislocation microstructure characteristics of surface grains under cyclic loading by discrete dislocation dynamics.
El Achkar, T.; Weygand, D.
2019. Modelling and simulation in materials science and engineering. doi:10.1088/1361-651X/ab1b7c

A gradient plasticity creep model accounting for slip transfer/activation at interfaces evaluated for the intermetallic NiAl-9Mo.
Albiez, J.; Erdle, H.; Weygand, D.; Böhlke, T.
2019. International journal of plasticity, 113, 291–311. doi:10.1016/j.ijplas.2018.10.006

Auswirkungen von Dehnrate und lokaler Temperaturentwicklung auf das Crashverhalten langfaser-verstärkter Thermoplaste. Dissertation.
Lienhard, J.
2019. Fraunhofer Verlag, Stuttgart

DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale.
Roters, F.; Diehl, M.; Shanthraj, P.; Eisenlohr, P.; Reuber, C.; Wong, S. L.; Maiti, T.; Ebrahimi, A.; Hochrainer, T.; Fabritius, H.-O.; Nikolov, S.; Friák, M.; Fujita, N.; Grilli, N.; Janssens, K. G. F.; Jia, N.; Kok, P. J. J.; Ma, D.; Meier, F.; Werner, E.; Stricker, M.; Weygand, D.; Raabe, D.
2019. Computational materials science, 158, 420–478. doi:10.1016/j.commatsci.2018.04.030

Mikrostrukturentwicklung unter reversierender Reibbelastung bei variierender elastischer und plastischer Dehnung. Dissertation.
Becker, S.
2019. Karlsruhe. doi:10.5445/IR/1000093966

Modern Times need Enlightened Innovation and Sophisticated Materials.
Kneer, A.; Wirtz, M.; Yurtsever-Kneer, S.; Barbe, S.; August, A.
2019. Galvanotechnik, 2019 (4), 712–719

Carbon Nanofibers: Locally Controlled Growth of Individual Lambda-Shaped Carbon Nanofibers.
Lutz, C.; Bog, U.; Loritz, T.; Syurik, J.; Malik, S.; Kumar, C. N. S.; Kübel, C.; Bruns, M.; Greiner, C.; Hirtz, M.; Hölscher, H.
2019. Small, 15 (7), 1970036. doi:10.1002/smll.201970036

Extension of Jackson-Hunt analysis for curved solid-liquid interfaces.
Nani, E. S.; Nestler, B.
2019. Journal of crystal growth, 512, 230–240. doi:10.1016/j.jcrysgro.2019.01.025

Physikalisch basierte mehrskalige Simulation der additiv gefertigten Nickel-Legierung Inconel 718. Dissertation.
Maiwald-Immer, T.
2019. KIT, Karlsruhe. doi:10.5445/IR/1000091992

Atomistic insights into lubricated tungsten/diamond sliding contacts.
Romero, P. A.; Mayrhofer, L.; Stoyanov, P.; Merz, R.; Kopnarski, M.; Dienwiebel, M.; Moseler, M.
2019. Frontiers in mechanical engineering. doi:10.3389/fmech.2019.00006

Tribological behavior of nanosecond-laser surface textured Ti6Al4V.
Kümmel, D.; Hamann-Schroer, M.; Hetzner, H.; Schneider, J.
2019. Wear, 422-423, 261–268. doi:10.1016/j.wear.2019.01.079

Liquid superlubricity obtained for self-mated silicon carbide in nonaqueous low-viscosity fluid.
Schreiber, P. J.; Schneider, J.
2019. Tribology international, 134, 7–14. doi:10.1016/j.triboint.2019.01.031

Deformation of metallic multilayers: an atomistic study of the relationship between structure and deformation mechanisms. Dissertation.
Gola, A.
2019. KIT, Karlsruhe. doi:10.5445/IR/1000091026

On the multiphase-field modeling of martensitic phase transformation in dual-phase steel using J2-viscoplasticity.
Schoof, E.; Herrmann, C.; Streichhan, N.; Selzer, M.; Schneider, D.; Nestler, B.
2019. Modelling and simulation in materials science and engineering, 27 (2), 025010. doi:10.1088/1361-651X/aaf980

Evolution of the True Contact Area of Laser Textured Tungsten Under Dry Sliding Conditions.
Lechthaler, B.; Ochs, G.; Mücklich, F.; Dienwiebel, M.
2019. Frontiers in mechanical engineering, 5, Article no 3. doi:10.3389/fmech.2019.00003

A scalable and extensible checkpointing scheme for massively parallel simulations.
Kohl, N.; Hötzer, J.; Schornbaum, F.; Bauer, M.; Godenschwager, C.; Köstler, H.; Nestler, B.; Rüde, U.
2019. The international journal of high performance computing applications, 33 (4), 571–589. doi:10.1177/1094342018767736

Phase-field analysis of quenching and partitioning in a polycrystalline Fe-C system under constrained-carbon equilibrium condition.
Kubendran Amos, P. G.; Schoof, E.; Streichan, N.; Schneider, D.; Nestler, B.
2019. Computational materials science, 159, 281–296. doi:10.1016/j.commatsci.2018.12.023

A bionic approach for heat generation and latent heat storage inspired by the polar bear.
August, A.; Kneer, A.; Reiter, A.; Wirtz, M.; Sarsour, J.; Stegmaier, T.; Barbe, S.; Gresser, G. T.; Nestler, B.
2019. Energy, 168, 1017–1030. doi:10.1016/j.energy.2018.11.143

Concurrent grain growth and coarsening of two-phase microstructures; large scale phase-field study.
Perumal, R.; Selzer, M.; Nestler, B.
2019. Computational materials science, 159, 160–176. doi:10.1016/j.commatsci.2018.12.017

Untersuchung von charakteristischen Versetzungsstrukturen und Versetzungstransportprozessen in Reibkontakten mit Versetzungsdynamik-Simulationen. Dissertation.
Gagel, J.
2019. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000088231

A mechanism-based homogenization of a dislocation source model for bending.
Schmitt, S.; Stricker, M.; Gumbsch, P.; Schulz, K.
2019. Acta materialia, 164, 663–672. doi:10.1016/j.actamat.2018.11.013

Charakterisierung und Modellierung von instabilen Metamaterialien. Dissertation.
Findeisen, C.
2019. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000087932

Phase-field simulation of solid state sintering.
Hötzer, J.; Seiz, M.; Kellner, M.; Rheinheimer, W.; Nestler, B.
2019. Acta materialia, 164, 184–195. doi:10.1016/j.actamat.2018.10.021

The brittle-to-ductile transition in cold rolled tungsten plates: Impact of crystallographic texture, grain size and dislocation density on the transition temperature.
Bonnekoh, C.; Jäntsch, U.; Hoffmann, J.; Leiste, H.; Hartmaier, A.; Weygand, D.; Hoffmann, A.; Reiser, J.
2019. International journal of refractory metals & hard materials, 78, 146–163. doi:10.1016/j.ijrmhm.2018.09.010

2018

Surface texturing of TiAl6V4 using cutting tools in reverse.
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia manufacturing, 18, 97–103. doi:10.1016/j.promfg.2018.11.013

Influence of cutting edge asymmetry on grain refinement of Ti6Al4V.
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia CIRP, 71, 232–237. doi:10.1016/j.procir.2018.05.065

Bestimmung der plastischen Anisotropie von Blechwerkstoffen durch ortsaufgelöste Simulationen auf Gefügeebene. Dissertation.
Pagenkopf, J.
2018. Fraunhofer Verlag, Stuttgart

Towards Simulation-Data Science : A Case Study on Material Failures.
Trittenbach, H.; Gauch, M.; Böhm, K.; Schulz, K.
2018. IEEE 5th International Conference on Data Science and Advanced Analytics (DSAA), Turin, Italy, 1-3 Oct. 2018, 450–459, IEEE, Piscataway (NJ). doi:10.1109/DSAA.2018.00058

Glassomer-Processing Fused Silica Glass Like a Polymer.
Kotz, F.; Schneider, N.; Striegel, A.; Wolfschläger, A.; Keller, N.; Worgull, M.; Bauer, W.; Schild, D.; Milich, M.; Greiner, C.; Helmer, D.; Rapp, B. E.
2018. Advanced materials, 30 (22), 1707100. doi:10.1002/adma.201707100

Shear melting of silicon and diamond and the disappearance of the polyamorphic transition under shear.
Moras, G.; Klemenz, A.; Reichenbach, T.; Gola, A.; Uetsuka, H.; Moseler, M.; Pastewka, L.
2018. Physical review materials, 2 (8), Art. Nr.: 083601. doi:10.1103/PhysRevMaterials.2.083601

lnfluence of fluid flow on morphological evolution of seaweed structures: A phase-field model [in press].
Veluvali, P. L.; Wang, F.; Selzer, M.; Ankit, K.; Nestler, B.
2018. Computational materials science

Multiphase-field model of small strain elasto-plasticity according to the mechanical jump conditions.
Herrmann, C.; Schoof, E.; Schneider, D.; Schwab, F.; Reiter, A.; Selzer, M.; Nestler, B.
2018. Computational mechanics, 62 (6), 1399–1412. doi:10.1007/s00466-018-1570-0

Three-Dimensional Phase-Field Investigation of Pore Space Cementation and Permeability in Quartz Sandstone.
Prajapati, N.; Selzer, M.; Nestler, B.; Busch, B.; Hilgers, C.; Ankit, K.
2018. Journal of geophysical research / Solid earth, 123 (8), 6378–6396. doi:10.1029/2018JB015618

Phasenfeldmodellierung und Simulation des Benetzungsverhaltens von Flüssigkeiten auf festen Oberflächen. Dissertation.
Ben Said, M.
2018. KIT, Karlsruhe. doi:10.5445/IR/1000088551

Simulation of the Effect of Ultrasound on the Dislocation Structure of Deformed Polycrystals.
Murzaev, R. T.; Bachurin, D. V.; Nazarov, A. A.
2018. The physics of metals and metallography, 119 (10), 993–1003. doi:10.1134/S0031918X18100101

Discrete dislocation dynamics study of dislocation microstructure during cyclic loading.
El-Achkar, T.; Weygand, D.
2018. Fatigue of Materials at Very High Numbers of Loading Cycles. Ed.: H.-J. Christ, 395–416, Springer Fachmedien Wiesbaden, Wiesbaden. doi:10.1007/978-3-658-24531-3_18

Modellierung des mechanischen Verhaltens von Stanznietklebverbindungen mit Berücksichtigung der Prozesssimulation. Dissertation.
Bier, M.
2018. Fraunhofer Verlag, Stuttgart

On the transferability of probabilistic fracture mechanics results for scaled 50 Hz and 60 Hz heavy duty gas turbine rotor disks.
Amann, C.; Kadau, K.; Gumbsch, P.
2018. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018; Oslo; Norway; 11 June 2018 through 15 June 2018, ASME, New York City (NY). doi:10.1115/GT2018-75561

Mechanisms of pearlite spheroidization: Insights from 3D phase-field simulations.
Amos, P. G. K.; Bhattacharya, A.; Nestler, B.; Ankit, K.
2018. Acta materialia, 161, 400–411. doi:10.1016/j.actamat.2018.09.043

Friction reduction through biologically inspired scale-like laser surface textures.
Schneider, J.; Djamiykov, V.; Greiner, C.
2018. Beilstein journal of nanotechnology, 9, 2561–2572. doi:10.3762/bjnano.9.238

Amorphous nickel nanophases inducing ferromagnetism in equiatomic Ni–Ti alloy.
Chellali, M. R.; Nandam, S. H.; Li, S.; Fawey, M. H.; Moreno-Pineda, E.; Velasco, L.; Boll, T.; Pastewka, L.; Kruk, R.; Gumbsch, P.; Hahn, H.
2018. Acta materialia, 161, 47–53. doi:10.1016/j.actamat.2018.09.019

Characterization of the microscopic tribological properties of sandfish (Scincus scincus) scales by atomic force microscopy.
Wu, W.; Lutz, C.; Mersch, S.; Thelen, R.; Greiner, C.; Gomard, G.; Hölscher, H.
2018. Beilstein journal of nanotechnology, 9, 2618–2627. doi:10.3762/bjnano.9.243

In Situ Digital Holography for 3D Topography Analysis of Tribological Experiments.
Martin Dienwiebel; Pantcho Stoyanov.
2018. Advanced Analytical Methods in Tribology, 289–305, Springer, Cham

Advanced Analytical Methods in Tribology.
Dienwiebel, M.; De Barros Bouchet, M.-I. (Hrsg.).
2018. Springer, Cham. doi:10.1007/978-3-319-99897-8

Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper.
Chen, X.; Schneider, R.; Gumbsch, P.; Greiner, C.
2018. Acta materialia, 161, 138–149. doi:10.1016/j.actamat.2018.09.016

Phase-field study of surface irregularities of a cathode particle during intercalation.
Santoki, J.; Schneider, D.; Selzer, M.; Wang, F.; Kamlah, M.; Nestler, B.
2018. Modelling and simulation in materials science and engineering, 26 (6), 065013. doi:10.1088/1361-651X/aad20a

Analyzing the cooperative growth of intermetallic phases with a curved solidification front.
Nani, E.; Nestler, B.; Ankit, K.
2018. Acta materialia, 159, 135–149. doi:10.1016/j.actamat.2018.08.017

On the globularization of the shapes associated with alpha-precipitate of two phase titanium alloys: Insights from phase-field simulations.
Kubendran Amos, P. G.; Schoof, E.; Schneider, D.; Nestler, B.
2018. Acta materialia, 159, 51–64. doi:10.1016/j.actamat.2018.08.009

Microstructure evolution under tribological loading and its elementary mechanisms. Dissertation.
Liu, Z.
2018. KIT, Karlsruhe. doi:10.5445/IR/1000085322

Characterization of a macro porous polymer membrane at micron-scale by Confocal-Laser-Scanning Microscopy and 3D image analysis.
Ley, A.; Altschuh, P.; Thom, V.; Selzer, M.; Nestler, B.; Vana, P.
2018. Journal of membrane science, 564, 543–551. doi:10.1016/j.memsci.2018.07.062

Chemo-elastic phase-field simulation of the cooperative growth of mutually-accommodating Widmanstätten plates.
Kubendran Amos, P. G.; Schoof, E.; Schneider, D.; Nestler, B.
2018. Journal of alloys and compounds, 767, 1141–1154. doi:10.1016/j.jallcom.2018.07.138

Graph-based investigation of three-dimensional microstructure rearrangement during ternary eutectic directional solidification of Al-Ag-Cu.
Steinmetz, P.; Hötzer, J.; Dennstedt, A.; Serr, C.; Nestler, B.; Genau, A.
2018. Journal of crystal growth, 498, 230–243. doi:10.1016/j.jcrysgro.2018.06.028

Dislocation multiplication in stage II deformation of fcc multi-slip single crystals.
Stricker, M.; Sudmanns, M.; Schulz, K.; Hochrainer, T.; Weygand, D.
2018. Journal of the mechanics and physics of solids, 119, 319–333. doi:10.1016/j.jmps.2018.07.003

An elasto-chemical phase-field model for isotropic solids.
Tschukin, O.; Schneider, D.; Nestler, B.
2018. European journal of mechanics / A, 73, 181–191. doi:10.1016/j.euromechsol.2018.06.014

Tribology of Wire Arc Spray Coatings under the Influence of Regenerative Fuels.
Böttcher, R.; Winkler, H.-J.; Dienwiebel, M.; Scherge, M.
2018. Lubricants, 6 (3), 60. doi:10.3390/lubricants6030060

Tribological Effects in and by Metal Cutting.
Segebade, E.; Schneider, J.; Schulze, V.
2018. 8th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation, ICTMP 2018; Elsinore; Denmark; 24 June 2018 through 26 June 2018. Ed.: N. Bay, 3–24, Trans Tech Publications Ltd, Zürich. doi:10.4028/www.scientific.net/KEM.767.3

Nanocomposites: Glassomer-Processing Fused Silica Glass Like a Polymer (Adv. Mater. 22/2018).
Kotz, F.; Schneider, N.; Striegel, A.; Wolfschläger, A.; Keller, N.; Worgull, M.; Bauer, W.; Schild, D.; Milich, M.; Greiner, C.; Helmer, D.; Rapp, B. E.
2018. Advanced materials, 30 (22), 1870151. doi:10.1002/adma.201870151

Discrete Dislocation Dynamics simulations of dislocation transport during sliding.
Gagel, J.; Weygand, D.; Gumbsch, P.
2018. Acta materialia, 156, 215–227. doi:10.1016/j.actamat.2018.06.002

Effective Thermal Conductivity of Composite Materials Based on Open Cell Foams.
August, A.; Reiter, A.; Kneer, A.; Selzer, M.; Nestler, B.
2018. Heat and Mass Transfer Research Journal, 2 (1), 33–45

Computergestütztes Design gradierter Metallschäume.
August, A.; Kneer, A.; Nestler, B.
2018. Forschung aktuell, 2018 (März), 56–58

Quantitative Comparison of Ternary Eutectic Phase-Field Simulations with Analytical 3D Jackson–Hunt Approaches.
Steinmetz, P.; Kellner, M.; Hötzer, J.; Nestler, B.
2018. Metallurgical and materials transactions / B, 49 (1), 213–224. doi:10.1007/s11663-017-1142-2

Phase-field analysis of volume-diffusion controlled shape-instabilities in metallic systems-II: Finite 3-dimensional rods.
Kubendran Amos, P. G.; Mushongera, L. T.; Mittnacht, T.; Nestler, B.
2018. Computational materials science, 144, 374–385. doi:10.1016/j.commatsci.2017.12.046

Phase-field analysis of volume-diffusion controlled shape-instabilities in metallic systems-I: 2-Dimensional plate-like structures.
Kubendran Amos, P. G.; Mushongera, L. T.; Nestler, B.
2018. Computational materials science, 144, 363–373. doi:10.1016/j.commatsci.2017.12.045

Multiphase-field modeling of martensitic phase transformation in a dual-phase microstructure.
Schoof, E.; Schneider, D.; Streichhan, N.; Mittnacht, T.; Selzer, M.; Nestler, B.
2018. International journal of solids and structures, 134, 181–194. doi:10.1016/j.ijsolstr.2017.10.032

Modeling fracture cementation processes in calcite limestone: a phase-field study.
Prajapati, N.; Selzer, M.; Nestler, B.; Busch, B.; Hilgers, C.
2018. Geothermal Energy, 6 (1), 7. doi:10.1186/s40517-018-0093-4

Phase-field modeling of reactive wetting and growth of the intermetallic Al2 Au phase in the Al-Au system.
Wang, F.; Reiter, A.; Kellner, M.; Brillo, J.; Selzer, M.; Nestler, B.
2018. Acta materialia, 146, 106–118. doi:10.1016/j.actamat.2017.12.015

Stages in the tribologically-induced oxidation of high-purity copper.
Liu, Z.; Patzig, C.; Selle, S.; Höche, T.; Gumbsch, P.; Greiner, C.
2018. Scripta materialia, 153, 114–117. doi:10.1016/j.scriptamat.2018.05.008

Plastic flow and dislocation strengthening in a dislocation density based formulation of plasticity.
Sudmanns, M.; Gumbsch, P.; Schulz, K.
2018. Computational materials science, 151, 317–327. doi:10.1016/j.commatsci.2018.04.065

The origin of surface microstructure evolution in sliding friction.
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P.
2018. Scripta materialia, 153, 63–67. doi:10.1016/j.scriptamat.2018.04.048

Phase-field study of dynamic velocity variations during directional solidification of eutectic NiAl-34Cr.
Kellner, M.; Kunz, W.; Steinmetz, P.; Hötzer, J.; Nestler, B.
2018. Computational materials science, 145, 291–305. doi:10.1016/j.commatsci.2017.12.053

Evaporation rate analysis of capillaries with polygonal cross-section.
Schweigler, K. M.; Seifritz, S.; Selzer, M.; Nestler, B.
2018. International journal of heat and mass transfer, 121, 943–951. doi:10.1016/j.ijheatmasstransfer.2017.12.090

Numerical and experimental investigation of texture shape and position in the macroscopic contact.
Codrignani, A.; Frohnapfel, B.; Magagnato, F.; Schreiber, P.; Schneider, J.; Gumbsch, P.
2018. Tribology international, 122, 46–57. doi:10.1016/j.triboint.2018.02.001

Entwicklung einer versetzungsbasierten Kontinuumstheorie mittels mechanismusbasierter Homogenisierung. Dissertation.
Schmitt, S. S.
2018. KIT, Karlsruhe. doi:10.5445/IR/1000083074

Perspectives on material modelling: Porous and particle-based microstructures.
Nestler, B.; August, A.; Selzer, M.; Hötzer, J.; Kellner, M.; Prajapati, N.; Rehn, V.; Seiz, M.
2018. Ceramic applications, 6 (1), 73–77

Correction to: Small strain multiphase-field model accounting for configurational forces and mechanical jump conditions.
Schneider, D.; Schoof, E.; Tschukin, O.; Reiter, A.; Herrmann, C.; Schwab, F.; Selzer, M.; Nestler, B.
2018. Computational mechanics, 61 (3), 297. doi:10.1007/s00466-017-1485-1

Friction and Wear Reduction in Copper with a Gradient Nano-grained Surface Layer.
Chen, X.; Han, Z.; Lu, K.
2018. ACS applied materials & interfaces, 10 (16), 13829–13838. doi:10.1021/acsami.8b01205

Phase-field simulations of pearlitic divergence in Fe-C-Mn steels.
Mushongera, L. T.; Amos, P. G. K.; Nestler, B.; Ankit, K.
2018. Acta materialia, 150, 78–87. doi:10.1016/j.actamat.2018.02.059

Electromigration-Induced Surface Drift and Slit Propagation in Polycrystalline Interconnects : Insights from Phase-Field Simulations.
Mukherjee, A.; Ankit, K.; Selzer, M.; Nestler, B.
2018. Physical review applied, 9 (4), Art.Nr. 044004. doi:10.1103/PhysRevApplied.9.044004

Atomic-scale simulation of structure and mechanical properties of Cu $_{1 - x}$ Ag $_{x}$ |Ni multilayer systems.
Gola, A.; Gumbsch, P.; Pastewka, L.
2018. Acta materialia, 150, 236–247. doi:10.1016/j.actamat.2018.02.046

Crystal-melt interface mobility in bcc Fe: Linking molecular dynamics to phase-field and phase-field crystal modeling.
Guerdane, M.; Berghoff, M.
2018. Physical review / B, 97 (14), 144105. doi:10.1103/PhysRevB.97.144105

Massively Parallel Stencil Code Solver with Autonomous Adaptive Block Distribution.
Berghoff, M.; Kondov, I.; Hötzer, J.
2018. IEEE transactions on parallel and distributed systems, 29 (10), 2282–2296. doi:10.1109/TPDS.2018.2819672

The parallel multi-physics phase-field framework PACE3D.
Hötzer, J.; Reiter, A.; Hierl, H.; Steinmetz, P.; Selzer, M.; Nestler, B.
2018. Journal of computational science, 26, 1–12. doi:10.1016/j.jocs.2018.02.011

Molecular probes reveal deviations from Amontons’ law in multi-asperity frictional contacts.
Weber, B.; Suhina, T.; Junge, T.; Pastewka, L.; Brouwer, A. M.; Bonn, D.
2018. Nature Communications, 9 (1), Art.Nr. 888. doi:10.1038/s41467-018-02981-y

Phase-field study of the transient phenomena induced by ’abnormally’ large grains during 2-dimensional isotropic grain growth.
Perumal, R.; Kubendran Amos, P. G.; Selzer, M.; Nestler, B.
2018. Computational materials science, 147, 227–237. doi:10.1016/j.commatsci.2018.02.028

Study of pattern selection in 3D phase-field simulations during the directional solidification of ternary eutectic Al-Ag-Cu.
Steinmetz, P.; Hötzer, J.; Kellner, M.; Genau, A.; Nestler, B.
2018. Computational materials science, 148, 131–140. doi:10.1016/j.commatsci.2018.02.040

Contact mechanics of graphene-covered metal surfaces.
Klemenz, A.; Gola, A.; Moseler, M.; Pastewka, L.
2018. Applied physics letters, 112 (6), Art. Nr.: 061601. doi:10.1063/1.5006770

Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern. Dissertation.
Hartweg, M.
2018. Fraunhofer Verlag, Stuttgart

Verformung, Schädigung und Mikrostrukturentwicklung der Legierung Alloy 800H unter Ermüdungsbean-spruchung bei hohen Temperaturen. Dissertation.
Hübsch, O.
2018. Fraunhofer Verlag, Stuttgart

Discrete-Continuum Transition: A Discussion of the Continuum Limit.
Schulz, K.; Schmitt, S.
2018. Technische Mechanik, 38 (1), 126–134. doi:10.24352/UB.OVGU-2018-012

Experimental Investigations on Pressure Loss and Heat Transfer of Two-Phase Carbon Dioxide Flow in a Horizontal Circular Pipe of 0.4 mm Diameter.
Kneer, A.; Wirtz, M.; Laufer, T.; Nestler, B.; Barbe, S.
2018. International journal of heat and mass transfer, 119, 828–840. doi:10.1016/j.ijheatmasstransfer.2017.11.146

Small strain multiphase-field model accounting for configurational forces and mechanical jump conditions.
Schneider, D.; Schoof, E.; Tschukin, O.; Reiter, A.; Herrmann, C.; Schwab, F.; Selzer, M.; Nestler, B.
2018. Computational mechanics, 61 (3), 277–295. doi:10.1007/s00466-017-1458-4

2017

A mechanism-based homogenization strategy for the determination of flow stress and strain hardening.
Schulz, K.; Sudmanns, M.
2017. Proceedings in applied mathematics and mechanics, 17 (1), 107–110. doi:10.1002/pamm.201710031

A fully-printed, BST MIM varactor for low ISM-band matching networks up to 1000 W.
Kienemund, D.; Fink, T.; Abrecht, M.; Bigler, W.; Binder, J. R.; Jakoby, R.; Maune, H.
2017. 2017 47th European Microwave Conference (EuMC), Nuremberg, 10–12 October 2017, 1001–1004, IEEE, Piscataway (NJ). doi:10.23919/EuMC.2017.8231015

Discussion of crack initiation in metal matrix composites.
Sudmanns, M.; Schulz, K.
2017. Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Stuttgart, Germany, 11th - 13th October 2017. Ed.: M. von Scheven, 296–299, Institute for Structural Mechanics, University of Stuttgart

Data-driven crack assessment.
Schulz, K.; Verrier, V.; Kreis, S.
2017. Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Stuttgart, Germany, 11th - 13th October 2017. Ed.: M. von Scheven, 292–295, Institute for Structural Mechanics, University of Stuttgart

Application of the critical plane approach to the torsional fatigue assessment of welds considering the effect of residual stresses.
Hemmesi, K.; Farajian, M.; Fatemi, A.
2017. International journal of fatigue, 101 (Part 2), 271–281. doi:10.1016/j.ijfatigue.2017.01.023

Anatomizing deformation mechanisms in nanocrystalline Pd90Au10.
Grewer, M.; Braun, C.; Deckarm, M. J.; Lohmiller, J.; Gruber, P. A.; Honkimäki, V.; Birringer, R.
2017. Mechanics of materials, 114, 254–267. doi:10.1016/j.mechmat.2017.08.010

Morphological Characterization of the Self-Assembly of Virus Movement Proteins into Nanotubes in the Absence of Virus Particles.
Schwan, S.; Ludtka, C.; Friedmann, A.; Cismak, A.; Berthold, L.; Goehre, F.; Kiesow, A.; Heilmann, A.
2017. Advanced biosystems, 1 (12), 1700113. doi:10.1002/adbi.201700113

Analyse geometrieabhängiger Verdunstungsraten in ungesättigter, konvektionsfreier Atmosphäre. Dissertation.
Schweigler, K. M.
2017. KIT, Karlsruhe. doi:10.5445/IR/1000077924

The Running-in Tribological Behavior of Pb-Free Brass and Its Effect on Microstructural Evolution.
Liu, L.; Zhang, Z.; Dienwiebel, M.
2017. Tribology letters, 65 (4), Art.Nr.: 160. doi:10.1007/s11249-017-0943-4

Transparent, abrasion-insensitive superhydrophobic coatings for real-world applications.
Helmer, D.; Keller, N.; Kotz, F.; Stolz, F.; Greiner, C.; Nargang, T. M.; Sachsenheimer, K.; Rapp, B. E.
2017. Scientific reports, 7 (1), Art.Nr. 15078. doi:10.1038/s41598-017-15287-8

Concepts of modeling surface energy anisotropy in phase-field approaches.
Tschukin, O.; Silberzahn, A.; Selzer, M.; Amos, P. G. K.; Schneider, D.; Nestler, B.
2017. Geothermal Energy, 5 (1), Art.Nr. 19. doi:10.1186/s40517-017-0077-9

Laser textured surfaces for mixed lubrication: Influence of aspect ratio, textured area and dimple arrangement.
Schneider, J.; Braun, D. A.; Greiner, C.
2017. Lubricants, 5 (3), Art. Nr.: 32. doi:10.3390/lubricants5030032

Phase-field study on the formation of first-neighbour topological clusters during the isotropic grain growth.
Perumal, R.; Kubendran Amos, P. G.; Selzer, M.; Nestler, B.
2017. Computational materials science, 140, 209–223. doi:10.1016/j.commatsci.2017.08.043

Meeting the Contact-Mechanics Challenge.
Müser, M. H.; Dapp, W. B.; Bugnicourt, R.; Sainsot, P.; Lesaffre, N.; Lubrecht, T. A.; Persson, B. N. J.; Harris, K.; Bennett, A.; Schulze, K.; Rohde, S.; Ifju, P.; Sawyer, W. G.; Angelini, T.; Ashtari Esfahani, H.; Kadkhodaei, M.; Akbarzadeh, S.; Wu, J.-J.; Vorlaufer, G.; Vernes, A.; Solhjoo, S.; Vakis, A. I.; Jackson, R. L.; Xu, Y.; Streator, J.; Rostami, A.; Dini, D.; Medina, S.; Carbone, G.; Bottiglione, F.; Afferrante, L.; Monti, J.; Pastewka, L.; Robbins, M. O.; Greenwood, J. A.
2017. Tribology letters, 65 (4), Art. Nr.: 118. doi:10.1007/s11249-017-0900-2

Computational modeling of calcite cementation in saline limestone aquifers : a phase-field study.
Prajapati, N.; Selzer, M.; Nestler, B.
2017. Geothermal Energy, 5 (1), Art. Nr.: 15. doi:10.1186/s40517-017-0072-1

Phasenfeldsimulationen zur Mikrostrukturentwicklung während des Sinterprozesses.
Hölzer, J.; Kellner, M.; Rehn, V.; Seiz, M.; Nestler, B.
2017. Forschung aktuell, 8–12

Numerical and experimental investigations on the growth of the intermetallic Mg₂Si phase in Mg infiltrated Si-foams.
Wang, F.; Matz, A. M.; Tschukin, O.; Heimann, J.; Mocker, B. S.; Nestler, B.; Jost, N.
2017. Advanced engineering materials, 19 (10), Art.Nr. 1700063. doi:10.1002/adem.201700063

Influence of growth velocity variations on the pattern formation during the directional solidification of ternary eutectic Al-Ag-Cu.
Hötzer, J.; Steinmetz, P.; Dennstedt, A.; Genau, A.; Kellner, M.; Sargin, I.; Nestler, B.
2017. Acta materialia, 136, 335–346. doi:10.1016/j.actamat.2017.07.007

Phase-field study on the effects of process and material parameters on the tilt angle during directional solidification of ternary eutectics.
Dargahi Noubary, K.; Kellner, M.; Steinmetz, P.; Hötzer, J.; Nestler, B.
2017. Computational materials science, 138, 403–411. doi:10.1016/j.commatsci.2017.07.006

Simulation der martensitischen Transformation in polykristallinen Gefügen mit der Phasenfeldmethode.
Schoof, E.; Streichhan, N.; Schneider, D.; Selzer, M.; Nestler, B.
2017. Forschung aktuell, 13–16

Magische Schäume.
August, A.; Matz, A. M.; Mocker, B. S.; Heimann, J.; Nestler, B.; Jost, N.; Krug, P.
2017. Horizonte, 49, 3–5

Phase-Field Modelling of Welding and of Elasticity-Dependent Phase Transformations. Dissertation.
Tschukin, O.
2017. KIT, Karlsruhe. doi:10.5445/IR/1000072502

Dislocation-density based description of the deformation of a composite material.
Schulz, K.; Sudmanns, M.; Gumbsch, P.
2017. Modelling and simulation in materials science and engineering, 25 (6), 064003. doi:10.1088/1361-651X/aa7a88

Interfacial free energy anisotropy driven faceting of precipitates.
Roy, A.; Nani, E. S.; Lahiri, A.; Gururajan, M. P.
2017. The philosophical magazine, 1–31. doi:10.1080/14786435.2017.1348633

Massiv-parallele und großskalige Phasenfeldsimulationen zur Untersuchung der Mikrostrukturentwicklung. Dissertation.
Hötzer, J.
2017. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000071870

Influence of grain boundary structure and topology on the plastic deformation of nanocrystalline aluminum as studied by atomistic simulations.
Prakash, A.; Weygand, D.; Bitzek, E.
2017. International journal of plasticity, 97, 107–125. doi:10.1016/j.ijplas.2017.05.011

Data science approaches for microstructure quantification and feature identification in porous membranes.
Altschuh, P.; Yabansu, Y. C.; Hötzer, J.; Selzer, M.; Nestler, B.; Kalidindi, S. R.
2017. Journal of membrane science, 540, 88–97. doi:10.1016/j.memsci.2017.06.020

Probabilistic Fracture Mechanics of Forged Rotor Disks. Dissertation.
Amann, C.
2017. KIT, Karlsruhe. doi:10.5445/IR/1000071647

Simulation der bei der gerichteten Erstarrung ternärer Eutektika entstehenden Mikrostruktur mit der Phasenfeldmethode. Dissertation.
Steinmetz, P.
2017. KIT, Karlsruhe. doi:10.5445/IR/1000071640

The atomic simulation environment - A Python library for working with atoms.
Hjorth Larsen, A.; JØrgen Mortensen, J.; Blomqvist, J.; Castelli, I. E.; Christensen, R.; Dułak, M.; Friis, J.; Groves, M. N.; Hammer, B.; Hargus, C.; Hermes, E. D.; Jennings, P. C.; Bjerre Jensen, P.; Kermode, J.; Kitchin, J. R.; Leonhard Kolsbjerg, E.; Kubal, J.; Kaasbjerg, K.; Lysgaard, S.; Bergmann Maronsson, J.; Maxson, T.; Olsen, T.; Pastewka, L.; Peterson, A.; Rostgaard, C.; SchiØtz, J.; Schütt, O.; Strange, M.; Thygesen, K. S.; Vegge, T.; Vilhelmsen, L.; Walter, M.; Zeng, Z.; Jacobsen, K. W.
2017. Journal of physics / Condensed matter, 29 (27), Art. Nr.: 273002. doi:10.1088/1361-648X/aa680e

Effect of capillarity on the breakup of liquid jets, interfacial wave and motion of droplets in immiscible liquids. Dissertation.
Wang, F.
2017. KIT, Karlsruhe. doi:10.5445/IR/1000071294

Analysis of the running-in of thermal spray coatings by time-dependent stribeck maps.
Linsler, D.; Kümmel, D.; Nold, E.; Dienwiebel, M.
2017. Wear, 376-377 (Part B), 1467–1474. doi:10.1016/j.wear.2017.02.026

Präparation weichmagnetischer Kompositwerkstoffe für strukturelle und mikromechanische Untersuchungen [Preparing Soft Magnetic Composites for Structural and Micromechanical Investigations].
Schwark, T.; Müller, M.; Mine, Y.; Kreuter, T.; Kraft, O.; Schwaiger, R.
2017. Practical Metallography : Praktische Metallographie, 54 (6), 366–387. doi:10.3139/147.110424

Numerical studies of welding residual stresses in tubular joints and experimental validations by means of x-ray and neutron diffraction analysis.
Hemmesi, K.; Farajian, M.; Boin, M.
2017. Materials and design, 126, 339–350. doi:10.1016/j.matdes.2017.03.088

Damage inititation and evolution in silicon nitride under cyclic and rolling contact. Dissertation.
Raga, R.
2017. Fraunhofer, Stuttgart

Untersuchung tribologischer Systeme mit Y-TZP-Keramiken. Dissertation.
Schröder, C.
2017. Fraunhofer, Stuttgart

Massiv-parallele und großskalige Phasenfeldsimulationen zur Untersuchung der Mikrostrukturentwicklung. Dissertation.
Hötzer, J.
2017. KIT, Karlsruhe. doi:10.5445/IR/1000069984

The interface in molybdenum-copper-composites used for thermal management applications.
Seiss, M.; Mrotzek, T.; Jäntsch, U.; Klimenkov, M.; Reiser, J.; Knabl, W.
2017. 33rd Annual Semiconductor Thermal Measurement and Management Symposium, SEMI-THERM 2017, Double Tree Hotel San Jose, United States, 13. - 17. März 2017, 246–251, IEEE Computer Society, Los Almitos (CA). doi:10.1109/SEMI-THERM.2017.7896937

Microstructure, mechanical properties and friction behavior of magnetron-sputtered V-C coatings.
Stoyanov, P.; Schneider, J.; Rinke, M.; Ulrich, S.; Nold, E.; Dienwiebel, M.; Stüber, M.
2017. Surface and coatings technology, 321, 366–377. doi:10.1016/j.surfcoat.2017.04.050

Mikrowellenplasmagestützte Prozessentwicklung zur Herstellung von Funktionsgradientenhartmetallen für die CVD-Diamantbeschichtung. Dissertation.
Mee, M.
2017. Shaker Verlag, Aachen

On the stress calculation within phase-field approaches : a model for finite deformations.
Schneider, D.; Schwab, F.; Schoof, E.; Reiter, A.; Herrmann, C.; Selzer, M.; Böhlke, T.; Nestler, B.
2017. Computational mechanics, 60 (2), 203–217. doi:10.1007/s00466-017-1401-8

Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen. Dissertation.
Stricker, M.
2017. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000068883

Vorhersage der Kantenrissbildung beim Warmbandwalzen schwer umformbarer Nickelbasislegierungen: Experimente, Modellbildung und Simulation. Dissertation.
Maas, P.
2017. Fraunhofer, Stuttgart

Characteristics of mechanical metamaterials based on buckling elements.
Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P.
2017. Journal of the mechanics and physics of solids, 102, 151–164. doi:10.1016/j.jmps.2017.02.011

Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen. Dissertation.
Stricker, M.
2017. KIT, Karlsruhe. doi:10.5445/IR/1000067987

Entwicklung und Anwendung von SPH-Simulationsverfahren zur Untersuchung der Anisotropieentstehung beim Foliengießen. Dissertation.
Polfer, P.
2017. Fraunhofer, Stuttgart

Development of Bond-Order Potentials for BCC Transition Metals.
Vitek, V.; Lin, Y. S.; Mrovec, M.
2017. 8th International Conference on Materials Structure and Micromechanics of Fracture, MSMF8, Brno, Czech Republic, 27. - 29. July 2016, 3–10, TTP, Zurich, Enfield, NH. doi:10.4028/www.scientific.net/SSP.258.3

Main-Group Halide Semiconductors Derived from Perovskite: Distinguishing Chemical, Structural, and Electronic Aspects.
Fabini, D. H.; Labram, J. G.; Lehner, A. J.; Bechtel, J. S.; Evans, H. A.; Van der Ven, A.; Wudl, F.; Chabinyc, M. L.; Seshadri, R.
2017. Inorganic chemistry, 56 (1), 11–25. doi:10.1021/acs.inorgchem.6b01539

Self-diffusion in intermetallic AlAu4: Molecular dynamics study down to temperatures relevant to wire bonding.
Guerdane, M.
2017. Computational materials science, 129, 13–23. doi:10.1016/j.commatsci.2016.11.012

Phase-field simulation of the microstructure evolution in the eutectic NiAl-34Cr system.
Kellner, M.; Sprenger, I.; Steinmetz, P.; Hötzer, J.; Nestler, B.; Heilmaier, M.
2017. Computational materials science, 128, 379–387. doi:10.1016/j.commatsci.2016.11.049

Integrated Research as Key to the Development of a Sustainable Geothermal Energy Technology.
Meller, C.; Bremer, J.; Ankit, K.; Baur, S.; Bergfeldt, T.; Blum, P.; Canic, T.; Eiche, E.; Gaucher, E.; Hagenmeyer, V.; Heberling, F.; Held, S.; Herfurth, S.; Isele, J.; Kling, T.; Kuhn, D.; Mayer, D.; Müller, B.; Nestler, B.; Neumann, T.; Nitschke, F.; Nothstein, A.; Nusiaputra, Y.; Orywall, P.; Peters, M.; Sahara, D.; Schäfer, T.; Schill, E.; Schilling, F.; Schröder, E.; Selzer, M.; Stoll, M.; Wiemer, H.-J.; Wolf, S.; Zimmermann, M.; Kohl, T.
2017. Energy technology, 5 (7), 965–1006. doi:10.1002/ente.201600579

Phase-field simulations of multi-component solidification and coarsening based on thermodynamic datasets. Dissertation.
Schulz, S.
2017. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000063920

Extraction of reduced-order process-structure linkages from phase-field simulations.
Yabansu, Y. C.; Steinmetz, P.; Hötzer, J.; Kalidindi, S. R.; Nestler, B.
2017. Acta materialia, 124, 182–194. doi:10.1016/j.actamat.2016.10.071

Irreversibility of dislocation motion under cyclic loading due to strain gradients.
Stricker, M.; Weygand, D.; Gumbsch, P.
2017. Scripta materialia, 129, 69–73. doi:10.1016/j.scriptamat.2016.10.029

Materials response to glancing incidence femtosecond laser ablation.
Echlin, M. P.; Titus, M. S.; Straw, M.; Gumbsch, P.; Pollock, T. M.
2017. Acta materialia, 124, 37–46. doi:10.1016/j.actamat.2016.10.055

Phase-field simulations of curvature-induced cascading of Widmanstätten-ferrite plates.
Bhattacharya, A.; Ankit, K.; Nestler, B.
2017. Acta materialia, 123, 317–328. doi:10.1016/j.actamat.2016.10.035

Experimental and numerical investigation of drop evaporation depending on the shape of the liquid/gas interface.
Schweigler, K. M.; Ben Said, M.; Seifritz, S.; Selzer, M.; Nestler, B.
2017. International journal of heat and mass transfer, 105, 655–663. doi:10.1016/j.ijheatmasstransfer.2016.10.033

Surface rippling during solidification of binary polycrystalline alloy : Insights from 3-D phase-field simulations.
Ankit, K.; Xing, H.; Selzer, M.; Nestler, B.; Glicksman, M. E.
2017. Journal of Crystal Growth, 457, 52–59. doi:10.1016/j.jcrysgro.2016.05.033

2016

Application of Large-Scale Phase-Field Simulations in the Context of High-Performance Computing.
Hötzer, J.; Jainta, M.; Ben Said, M.; Steinmetz, P.; Berghoff, M.; Nestler, B.
2016. High Performance Computing in Science and Engineering ’15: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2015. Ed.: W. Nagel, 659–674, Springer International Publishing, Berlin. doi:10.1007/978-3-319-24633-8_42

Generierung von dreidimensionalen Pulverstrukturen.
Hölzer, J.; Serr, C.; Nestler, B.
2016. Forschung aktuell, 32–35

Evolution von Mikroporen in Kristallen mit hexagonaler Gitteranisotropie.
Schneider, D.; Langerome, B.; Selzer, M.; Reiter, A.; Nestler, B.
2016. Forschung aktuell, 36–38

Multiscale simulations on the coarsening of Cu-rich precipitates in α-Fe using kinetic monte carlo, molecular dynamics, and phase-field simulations.
Molnar, D.; Mukherjee, R.; Choudhury, A.; Mora, A.; Binkele, P.; Selzer, M.; Nestler, B.; Schmauder, S.
2016. Multiscale Materials Modeling : Approaches to Full Multiscaling. Ed.: S. Schmauder, 15–36, De Gruyter, Berlin. doi:10.1515/9783110412451-004

Miniaturisierung? Ja, bitte!.
Piotter, V.; Eberl, C.; Kraft, O.
2016. Forschung, 41 (3), 24–27. doi:10.1002/fors.201690036

Geothermal heat in a heat pump use.
Pavlova, A.; Hansen, J.; Obermeyer, H.; Pavlova, I.
2016. IOP conference series / Earth and environmental science, 43, Art.Nr. 012025. doi:10.1088/1755-1315/43/1/012025

Zum Einfluss struktureller Eigenschaften auf das tribologische und rheologische Verhalten geschmierter Reibkontakte am Beispiel von ionischen Flüssigkeiten. Dissertation.
Dold, C.
2016. KIT, Karlsruhe. doi:10.5445/IR/1000067368

Corrigendum to “In situ TEM study of twin boundary migration in sub-micron Be fibers” [Acta Mater. 96 (2015) 57–65].
Mompiou, F.; Legros, M.; Ensslen, C.; Kraft, O.
2016. Acta materialia, 109, 406–407. doi:10.1016/j.actamat.2016.02.055

Phasenfeldmodellierung mechanisch getriebener Grenzflächenbewegungen in mehrphasigen Systemen. Dissertation.
Schneider, D.
2016. KIT, Karlsruhe. doi:10.5445/IR/1000066948

A mesoscale approach for dislocation density motion using a Runge-Kutta discontinuous Galerkin method.
Schulz, K.; Wagner, L.; Wieners, C.
2016. Proceedings in applied mathematics and mechanics, 16 (1), 403–404. doi:10.1002/pamm.201610190

Study of complex microstructure evolution in ternary eutectic alloys with massive parallel large-scale phasefield simulations.
Hötzer, J.; Jainta, M.; Bauer, M.; Steinmetz, P.; Kellner, M.; Köstler, H.; Rüde, U.; Nestler, B.
2016. High performance computing in science and engineering, Garching/Munich 2016. Ed.: S. Wagner, 194–195, Bayerische Akademie der Wissenschaften, München

Tribological Performance of Aligned Silicon Nitride Ceramics under Isooctane-Lubricated Oscillating Sliding Conditions.
Schneider, J.; Miranzo, P.; Isabel Osendi, M.; Belmonte, M.
2016. Journal of the American Ceramic Society, 99 (1), 241–248. doi:10.1111/jace.13805

Simulation von Laserschweißprozessen zur Bewertung der wasserstoffbeeinflussten Kaltrissneigung hochfester Stähle. Dissertation.
Schweizer, F.
2016. KIT, Karlsruhe. doi:10.5445/IR/1000063625

Mikrostruktur- und mechanismusbasierte Werkstoffmodelle zur Beschreibung des Deformations- und Lebensdauerverhaltens von thermomechanisch beanspruchten Graugusswerkstoffen. Dissertation.
Metzger, M.
2016. Fraunhofer, Stuttgart

Detachment of nanowires driven by capillarity.
Wang, F.; Nestler, B.
2016. Scripta materialia, 113, 167–170. doi:10.1016/j.scriptamat.2015.11.002

Analytics for microstructure datasets produced by phase-field simulations.
Steinmetz, P.; Yabansu, Y. C.; Hötzer, J.; Jainta, M.; Nestler, B.; Kalidindi, S. R.
2016. Acta materialia, 103, 192–203. doi:10.1016/j.actamat.2015.09.047

Calibration of a multi-phase field model with quantitative angle measurement.
Hötzer, J.; Tschukin, O.; Ben Said, M.; Berghoff, M.; Jainta, M.; Barthelemy, G.; Smorchkov, N.; Schneider, D.; Selzer, M.; Nestler, B.
2016. Journal of materials science, 51 (4), 1788–1797. doi:10.1007/s10853-015-9542-7

Microstructures in a ternary eutectic alloy : devising metrics based on neighbourhood relationships.
Dennstedt, A.; Choudhury, A.; Ratke, L.; Nestler, B.
2016. IOP conference series / Materials science and engineering, 117, Art.Nr. 012025. doi:10.1088/1757-899X/117/1/012025

Large-scale phase-field simulations of ternary eutectic microstructure evolution.
Steinmetz, P.; Hötzer, J.; Kellner, M.; Dennstedt, A.; Nestler, B.
2016. Computational materials science, 117, 205–214. doi:10.1016/j.commatsci.2016.02.001

Phase-field simulations of spiral growth during directional ternary eutectic solidification.
Hötzer, J.; Steinmetz, P.; Jainta, M.; Schulz, S.; Kellner, M.; Nestler, B.; Genau, A.; Dennstedt, A.; Bauer, M.; Köstler, H.; Rüde, U.
2016. Acta materialia, 106, 249–259. doi:10.1016/j.actamat.2015.12.052

A general approximation of the exponential Cauchy-Born hypothesis to model arbitrarily shaped shell-like nanostructures within continuum mechanics.
Findeisen, C.; Wackerfuß, J.
2016. International journal for numerical methods in engineering, 105 (10), 747–780. doi:10.1002/nme.4992

Influence of substrate interaction and confinement on electric-field-induced transition in symmetric block-copolymer thin films.
Mukherjee, A.; Mukherjee, R.; Ankit, K.; Bhattacharya, A.; Nestler, B.
2016. Physical review / E, 93 (3), Art.Nr.: 032504. doi:10.1103/PhysRevE.93.032504

Mesoskopischer Ansatz zur Festigkeitsberechnung von Bremsscheiben. Dissertation.
Schmid, S.
2016. KIT, Karlsruhe. doi:10.5445/IR/1000062541

The role of dislocation pile-up in flow stress determination and strain hardening.
Zhu, Y.; Xiang, Y.; Schulz, K.
2016. Scripta materialia, 116, 53–56. doi:10.1016/j.scriptamat.2016.01.025

Importance of inclusion of the effect of s electrons into bond-order potentials for transition bcc metals with d-band mediated bonding.
Lin, Y.-S.; Mrovec, M.; Vitek, V.
2016. Modelling and simulation in materials science and engineering, 24 (8), Art. Nr.: 085001. doi:10.1088/0965-0393/24/8/085001

The evolving quality of frictional contact with graphene.
Li, S.; Li, Q.; Carpick, R. W.; Gumbsch, P.; Liu, X. Z.; Ding, X.; Sun, J.; Li, J.
2016. Nature <London> (0028-0836, 1476-4687), 539 (7630), 541–545. doi:10.1038/nature20135

Hydrogenated vacancies lock dislocations in aluminium.
Xie, D.; Li, S.; Li, M.; Wang, Z.; Gumbsch, P.; Sun, J.; Ma, E.; Li, J.; Shan, Z.
2016. Nature Communications, 7, 13341. doi:10.1038/ncomms13341

Modellierung des Verformungs- und Versagensverhaltens punktgeschweißter Mischverbindungen zwischen mikrolegierten und pressgehärteten Stählen. Dissertation.
Burget, S.
2016. Fraunhofer, Stuttgart

Heat propagation in computer designed and real metal foam structures.
August, A.; Matz, A. M.; Nestler, B.; Jost, N.
2016. Multidiscipline modeling in materials and structures, 12 (4). doi:10.1108/MMMS-03-2016-0012

Applications of the phase-field method for the solidification of microstructures in multi-component systems.
Hötzer, J.; Kellner, M.; Steinmetz, P.; Nestler, B.
2016. Journal of the Indian Institute of Science, 96 (3), 235–256

Mikrostruktursimulationen zur Ermittlung von Materialeigenschaften für Blechwerkstoffe und Anwendung in der Umformsimulation. Dissertation.
Baiker, M.
2016. Fraunhofer, Stuttgart

Electric-field-induced lamellar to hexagonally perforated lamellar transition in diblock copolymer thin films: Kinetic pathways.
Mukherjee, A.; Ankit, K.; Reiter, A.; Selzer, M.; Nestler, B.
2016. Physical chemistry, chemical physics, 18 (36), 25609–25620. doi:10.1039/c6cp04903f

Ultrasound influence on behavior of disordered dislocation systems in a crystal with non-equilibrium grain boundaries.
Bachurin, D. V.; Murzaev, R. T.; Baimova, J. A.; Samigullina, A. A.; Krylova, K. A.
2016. Letters on Materials, 6 (3), 183–188. doi:10.22226/2410-3535-2016-3-183-188

Combining in situ and online approaches to monitor interfacial processes in lubricated sliding contacts.
Stoyanov, P.; Shockley, J. M.; Dienwiebel, M.; Chromik, R. R.
2016. MRS communications, 6 (3), 301–308. doi:10.1557/mrc.2016.35

Sequence of Stages in the Microstructure Evolution in Copper under Mild Reciprocating Tribological Loading.
Greiner, C.; Liu, Z.; Strassberger, L.; Gumbsch, P.
2016. ACS applied materials & interfaces, 8 (24), 15809–15819. doi:10.1021/acsami.6b04035

Molecular Dynamic Simulation of Collision-Induced Third-Body Formation in Hydrogen-Free Diamond-Like Carbon Asperities.
Lautz, J. von; Pastewka, L.; Gumbsch, P.; Moseler, M.
2016. Tribology letters, 63 (2), 1–9. doi:10.1007/s11249-016-0712-9

A reciprocating optical in situ tribometer with high-speed data acquisition.
Becker, S.; Popp, U.; Greiner, C.
2016. Review of scientific instruments, 87 (8), 085101. doi:10.1063/1.4959883

Phase-Field Modeling of Grain-Boundary Grooving Under Electromigration.
Mukherjee, A.; Ankit, K.; Mukherjee, R.; Nestler, B.
2016. Journal of electronic materials, 45 (12), 6233–6246. doi:10.1007/s11664-016-4848-z

First principles characterisation of brittle transgranular fracture of titanium hydrides.
Olsson, P. A. T.; Mrovec, M.; Kroon, M.
2016. Acta materialia, 118, 362–373. doi:10.1016/j.actamat.2016.07.037

Offset-corrected Δ -Kohn-Sham scheme for semiempirical prediction of absolute x-ray photoelectron energies in molecules and solids.
Walter, M.; Moseler, M.; Pastewka, L.
2016. Physical review / B, 94 (4), Art.Nr.:041112. doi:10.1103/PhysRevB.94.041112

Flexoelectricity and the polarity of complex ferroelastic twin patterns.
Salje, E. K. H.; Li, S.; Stengel, M.; Gumbsch, P.; Ding, X.
2016. Physical review / B, 94 (2), 024114. doi:10.1103/PhysRevB.94.024114

Haften wie ein Gecko.
Greiner, C.; Hölscher, H.
2016. Physik in unserer Zeit, 47 (3), 116–122. doi:10.1002/piuz.201601422

3D Synchrotron Imaging of a Directionally Solidified Ternary Eutectic.
Dennstedt, A.; Helfen, L.; Steinmetz, P.; Nestler, B.; Ratke, L.
2016. Metallurgical and materials transactions / A, 47 (3), 981–984. doi:10.1007/s11661-015-3294-5

Comparison of analytical methods for the consideration of thermal stresses in the engineering failure assessment.
Dittmann, F.; Varfolomeev, I.
2016. 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy, 2974–2981, Curran, Red Hook, NY. doi:10.1016/j.prostr.2016.06.372

Physically motivated model for creep of directionally solidified eutectics evaluated for the intermetallic NiAl-9Mo.
Albiez, J.; Sprenger, I.; Seemüller, C.; Weygand, D.; Heilmaier, M.; Böhlke, T.
2016. Acta materialia, 110, 377–385. doi:10.1016/j.actamat.2016.02.024

Structural lubricity under ambient conditions.
Cihan, E.; Ipek, S.; Durgun, E.; Baykara, M. Z.
2016. Nature Communications, 7, Art.Nr.: 12055. doi:10.1038/ncomms12055

First-principles investigation of hydrogen interaction with TiC precipitates in α-Fe.
Di Stefano, D.; Nazarov, R.; Hickel, T.; Neugebauer, J.; Mrovec, M.; Elsässer, C.
2016. Physical Review B - Condensed Matter and Materials Physics, 93 (18), 184108/1–14. doi:10.1103/PhysRevB.93.184108

Ultrahigh Tensile Strength Nanowires with a Ni/Ni-Au Multilayer Nanocrystalline Structure.
An, B.; Jeon, I.; Seo, J.; Ahn, J.; Kraft, O.; Choi, I.; Kim, Y.
2016. Nano letters, 16 (6), 3500–3506. doi:10.1021/acs.nanolett.6b00275

Phase-field modeling of crack propagation in multiphase Systems.
Schneider, D.; Schoof, E.; Huang, Y.; Selzer, M.; Nestler, B.
2016. Computer methods in applied mechanics and engineering, 312, 186–195. doi:10.1016/j.cma.2016.04.009

Modeling of crack propagation on a mesoscopic length scale.
Nestler, B.; Schneider, D. M.; Schoof, E.; Huang, Y.; Selzer, M.
2016. GAMM-Mitteilungen, 39 (1), 78–91. doi:10.1002/gamm.201610005

Numerical and experimental description of the welding residual stress field in tubular joints for fatigue assessment.
Hemmesi, K.; Farajian, M.; Siegele, D.
2016. Welding in the World, 60 (4), 741–748. doi:10.1007/s40194-016-0328-6

Chronology of the microstructure evolution for pearlitic steel under unidirectional tribological loading.
Wolff, K.; Liu, Z.; Braun, D.; Schneider, J.; Greiner, C.
2016. Tribology international, 102, 540–545. doi:10.1016/j.triboint.2016.06.016

Bond-order potential for magnetic body-centered-cubic iron and its transferability.
Lin, Y.; Mrověc, M.; Vitek, V.
2016. Physical Review B, 93 (21), 214107. doi:10.1103/PhysRevB.93.214107

Phase-field simulations of multi-component solidification and coarsening based on thermodynamic datasets. Dissertation.
Schulz, S.
2016. KIT, Karlsruhe. doi:10.5445/IR/1000056199

Einlaufverhalten einer untereutektischen AlSi-Legierung unter Berücksichtigung des Randzonengefüges. Dissertation.
Linsler, D.
2016. KIT, Karlsruhe. doi:10.5445/IR/1000056144

Liquid Glass: A Facile Soft Replication Method for Structuring Glass.
Kotz, F.; Plewa, K.; Bauer, W.; Schneider, N.; Keller, N.; Nargang, T.; Helmer, D.; Sachsenheimer, K.; Schäfer, M.; Worgull, M.; Greiner, C.; Richter, C.; Rapp, B.
2016. Advanced materials, 28 (23), 4646–4650. doi:10.1002/adma.201506089

The creep behavior of long fiber reinforced thermoplastics examined by microstructural simulations.
Fliegener, S.; Hohe, J.; Gumbsch, P.
2016. Composites science and technology, 131, 1–11. doi:10.1016/j.compscitech.2016.05.006

A multiscale approach for thermomechanical simulations of loading courses in cast iron brake discs.
Schmid, S.; Schneider, D. M.; Herrmann, C.; Selzer, M.; Nestler, B.
2016. International Journal for Multiscale Computational Engineering, 14 (1), 25–43. doi:10.1615/IntJMultCompEng.2015014764

Contact area of rough spheres : Large scale simulations and simple scaling laws.
Pastewka, L.; Robbins, M. O.
2016. Applied physics letters, 108 (22), Art. Nr. 221601. doi:10.1063/1.4950802

In Situ Formation of Nanohybrid Shish-Kebabs during Electrospinning for the Creation of Hierarchical Shish-Kebab Structures.
Arras, M. M. L.; Jana, R.; Mühlstädt, M.; Maenz, S.; Andrews, J.; Su, Z.; Grasl, C.; Jandt, K. D.
2016. Macromolecules, 49 (9), 3550–3558. doi:10.1021/acs.macromol.6b00153

Phase-field study of the pattern formation in Al-Ag-Cu under the influence of the melt concentration.
Steinmetz, P.; Kellner, M.; Hötzer, J.; Dennstedt, A.; Nestler, B.
2016. Computational Materials Science, 121, 6–13. doi:10.1016/j.commatsci.2016.04.025

Tailored Buckling Microlattices as Reusable Light-Weight Shock Absorbers.
Frenzel, T.; Findeisen, C.; Kadic, M.; Gumbsch, P.; Wegener, M.
2016. Advanced materials, 28 (28), 5865–5870. doi:10.1002/adma.201600610

Formation of extended prismatic dislocation structures under indentation.
Gagel, J.; Weygand, D.; Gumbsch, P.
2016. Acta Materialia, 111 (1), 399–406. doi:10.1016/j.actamat.2016.04.002

Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts.
Savio, D.; Pastewka, L.; Gumbsch, P.
2016. Science Advances, 2 (3), e1501585. doi:10.1126/sciadv.1501585

Activation and mechanochemical breaking of C−C bonds initiate wear of diamond (110) surfaces in contact with silica.
Peguiron, A.; Moras, G.; Walter, M.; Uetsuka, H.; Pastewka, L.; Moseler, M.
2016. Carbon, 98, 474–483. doi:10.1016/j.carbon.2015.10.098

Elasticity limits structural superlubricity in large contacts.
Sharp, T. A.; Pastewka, L.; Robbins, M. O.
2016. Physical Review B - Condensed Matter and Materials Physics, 93 (12), Article Nr. 121402. doi:10.1103/PhysRevB.93.121402

Reibung unter Zugzwang.
Pastewka, L.
2016. Physik-Journal, 15 (3), 16–17

Fertigungstechnische und tribologische Wirkmechanismen beim Polymerläppen am Beispiel der Werkstoffpaarung einer Nockenwellenlagerung. Dissertation.
Weyhmüller, T.
2016. KIT, Karlsruhe. doi:10.5445/IR/1000053542

Phase-field study of pore-grain boundary interaction.
Hötzer, J.; Rehn, V.; Rheinheimer, W.; Hoffmann, M. J.; Nestler, B.
2016. Journal of the Ceramic Society of Japan, 124 (4), 329–339. doi:10.2109/jcersj2.15266

Modellierung von Anisotropieentwicklung und Rissausbreitung beim Sintern dünner keramischer Schichten. Dissertation.
Rasp, T.
2016. Fraunhofer, Stuttgart

Phase-field modeling of microstructural pattern formation in alloys and geological veins. Dissertation.
Ankit, K.
2016. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000052440

2015

Considering user’s impact in validation activities - An approach for the determination of requirements.
Pinner, T.; Jost, F.; Schmid, D.; Albers, A.
2015. 20th International Conference on Engineering Design, ICED 2015, Bovisa Campus of Politecnico di MilanoMilan, Italy, 27 - 30 July, 2015, 51–62, The Design Society, Glasgow

Discussion of the Evolution of Micro Cracks by Characterization and Modelling of Metal Matrix Composites Reinforced by Metallic Glass Particles.
Schulz, K.; Lichtenberg, K.; Weidenmann, K. A.
2015. Proceedings to the 20th International Conference on Composite Materials, 19-24 July 2015, Copenhagen, Denmark, 1–12, http://www.iccm-central.org/

Die Elite der Maschinenbauer. Professorin Britta Nestler forscht am KIT.
Nestler, B.
2015. Stadtgespräche aus Karlsruhe. Hrsg.: M. Kehle, 119–124, Gmeiner, Meßkirch

Charakterisierung mehrkomponentiger Materialstrukturen durch den Einsatz von Höchstleistungsrechnern und Data Mining Konzepte.
Steinmetz, P.; Hötzer, J.; Nestler, B.
2015. Ingenieur-Spiegel, (3)

Die Vielfalt der Musterbildung in Metallen - Großskalige Phasenfeldsimulationen zur gerichteten Erstarrung ternärer eutektischer Systeme.
Hötzer, J.; Jainta, M.; Steinmetz, P.; Dennstedt, A.; Nestler, B.
2015. Horizonte, 45, 10–13

Elasto-plastic phase-field model accounting for mechanical jump conditions during solid-state phase transformations.
Schneider, D.; Tschukin, O.; Choudhury, A.; Selzer, M.; Nestler, B.
2015. Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM), Whistler, Canada, 28th June - 3rd July 2015. Ed.: M. Militzer, 899–900, PTM, Whistler (British Columbia)

Large scale phase-field simulations of directional ternary eutectic solidification.
Hötzer, J.; Jainta, M.; Steinmetz, P.; Nestler, B.; Dennstedt, A.; Genau, A.; Bauer, M.; Köstler, H.; Rüde, U.
2015. Acta materialia, 93, 194–204. doi:10.1016/j.actamat.2015.03.051

Underdamped capillary wave caused by solutal Marangoni convection in immiscible liquids.
Wang, F.; Ben Said, M.; Selzer, M.; Nestler, B.
2015. Journal of materials science, 51 (4), 1820–1828. doi:10.1007/s10853-015-9600-1

Compound Droplets on Fibers.
Weyer, F.; Ben Said, M.; Hötzer, J.; Berghoff, M.; Dreesen, L.; Nestler, B.; Vandewalle, N.
2015. Langmuir, 31 (28), 7799–7805. doi:10.1021/acs.langmuir.5b01391

Phase-Field Model for Mixed-Mode of Growth Applied to Austenite to Ferrite Transformation.
Bhattacharya, A.; Upadhyay, C. S.; Sangal, S.
2015. Metallurgical and materials transactions / A, 46 (2), 926–936. doi:10.1007/s11661-014-2665-7

Diffuse interface method for fluid flow and heat transfer in cellular solids.
Ettrich, J.; Nestler, B.
2015. Advances in engineering software, 87, 1–12. doi:10.1016/j.advengsoft.2015.04.012

Reduced tight-binding models for elemental Si and N, and ordered binary Si-N systems.
Gehrmann, J.; Pettifor, D. G.; Kolmogorov, A. N.; Reese, M.; Mrovec, M.; Elsaesser, C.; Drautz, R.
2015. Physical review / B, 91 (5), Art. Nr.: 054109. doi:10.1103/PhysRevB.91.054109

Small-Scale Multiaxial Setup for Damage Detection Into the Very High Cycle Fatigue Regime.
Straub, T.; Berwind, M. F.; Kennerknecht, T.; Lapusta, Y.; Eberl, C.
2015. Experimental mechanics, 55 (7), 1285–1299. doi:10.1007/s11340-015-0027-z

First-principles investigation of hydrogen trapping and diffusion at grain boundaries in nickel.
Di Stefano, D.; Mrovec, M.; Elsässer, C.
2015. Acta materialia, 98, 306–312. doi:10.1016/j.actamat.2015.07.031

A method for coupling the phase-field model based on a grand-potential formalism to thermodynamic databases.
Choudhury, A.; Kellner, M.; Nestler, B.
2015. Current opinion in solid state & materials science, 19 (5), 287–300. doi:10.1016/j.cossms.2015.03.003

Complex Nanotwin Substructure of an Asymmetric Sigma 9 Tilt Grain Boundary in a Silicon Polycrystal.
Stoffers, A.; Ziebarth, B.; Barthel, J.; Cojocaru-Mirédin, O.; Elsässer, C.; Raabe, D.
2015. Physical review letters, 115 (23), Art.Nr.:235502. doi:10.1103/PhysRevLett.115.235502

Theoretical and experimental study of the core structure and mobility of dislocations and their influence on the ferroelectric polarization in perovskite KNbO3.
Hirel, P.; Mark, A. F.; Castillo-Rodriguez, M.; Sigle, W.; Mrovec, M.; Elsässer, C.
2015. Physical review / B, 92 (21), Art.Nr.:214101. doi:10.1103/PhysRevB.92.214101

Equivalent plastic strain gradient plasticity with grain boundary hardening and comparison to discrete dislocation dynamics.
Bayerschen, E.; Stricker, M.; Wulfinghoff, S.; Weygand, D.; Böhlke, T.
2015. Proceedings of the Royal Society of London / A, 471 (2184), Art.Nr.:20150388. doi:10.1098/rspa.2015.0388

Influence of subsurface plastic deformation on the running-in behavior of a hypoeutectic AlSi alloy.
Linsler, D.; Schröckert, F.; Scherge, M.
2015. Tribology International, 100, 224–230. doi:10.1016/j.triboint.2016.01.033

Massively parallel phase-field simulations for ternary eutectic directional solidification.
Bauer, M.; Hötzer, J.; Jainta, M.; Steinmetz, P.; Berghoff, M.; Schornbaum, F.; Godenschwager, C.; Köstler, H.; Nestler, B.; Rüde, U.
2015. International Conference for High Performance Computing, Networking, Storage and Analysis, SC 2015; Austin; United States; 15 November 2015 through 20 November 2015, Art.Nr.: 8, ACM, New York (NY). doi:10.1145/2807591.2807662

Optimum dimple diameter for friction reduction with laser surface texturing: the effect of velocity gradient.
Greiner, C.; Merz, T.; Braun, D.; Codrignani, A.; Magagnato, F.
2015. Surface topography, 3 (4). doi:10.1088/2051-672X/3/4/044001

Internal stresses in a homogenized representation of dislocation microstructures.
Schmitt, S.; Gumbsch, P.; Schulz, K.
2015. Journal of the Mechanics and Physics of Solids, 84, 528–544. doi:10.1016/j.jmps.2015.08.012

Dislocation multiplication mechanisms – Glissile junctions and their role on the plastic deformation at the microscale.
Stricker, M.; Weygand, D.
2015. Acta Materialia, 99, 130–139. doi:10.1016/j.actamat.2015.07.073

Stress and strain fluctuations in plastic deformation of crystals with disordered microstructure.
Kapetanou, O.; Weygand, D.; Zaiser, M.
2015. Journal of Statistical Mechanics: Theory and Experiment, (8), P08009. doi:10.1088/1742-5468/2015/08/P08009

Lithium Ion Conduction in LiTi₂(PO₄)₃ and Related Compounds Based on the NASICON Structure: A First-Principles Study.
Lang, B.; Ziebarth, B.; Elsässer, C.
2015. Chemistry of Materials, 27 (14), 5040–5048. doi:10.1021/acs.chemmater.5b01582

Microscale study of frictional properties of graphene in ultra high vacuum.
Marchetto, D.; Feser, T.; Dienwiebel, M.
2015. Friction, 3 (2), 161–169. doi:10.1007/s40544-015-0080-8

The structure of tribolayers at the commutator and brush interface: A case study of failed and non-failed DC motors.
Fakih, B.; Dienwiebel, M.
2015. Tribology International, 92, 21–28. doi:10.1016/j.triboint.2015.05.008

Interstitial iron impurities at cores of dissociated dislocations in silicon.
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B, 92, 195308. doi:10.1103/PhysRevB.92.195308

The interaction of dislocations and hydrogen-vacancy complexes and its importance for deformation-induced proto nano-voids formation in α-Fe.
Li, S.; Li, Y.; Lo, Y.-C.; Neeraj, T.; Srinivasan, R.; Ding, X.; Sun, J.; Qi, L.; Gumbsch, P.; Li, J.
2015. International Journal of Plasticity, 74, 175–191. doi:10.1016/j.ijplas.2015.05.017

Influence of dislocation strain fields on the diffusion of interstitial iron impurities in silicon.
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B, 92, 115309. doi:10.1103/PhysRevB.92.115309

Dislocation injection in strontium titanate by femtosecond laser pulses.
Titus, M. S.; Echlin, M. P.; Gumbsch, P.; Pollock, T. M.
2015. Journal of Applied Physics, 118 (7), 075901. doi:10.1063/1.4928772

Multiscale Simulation of Plasticity in bcc Metals.
Weygand, D.; Mrovec, M.; Hochrainer, T.; Gumbsch, P.
2015. Annual Review of Materials Research, 45 (1), 369–390. doi:10.1146/annurev-matsci-070214-020852

Polar twin boundaries and nonconventional ferroelectric switching.
Salje, E. K. H.; Li, S.; Zhao, Z.; Gumbsch, P.; Ding, X.
2015. Applied Physics Letters, 106 (21), 212907. doi:10.1063/1.4922036

Verbesserung lokaler Spaltbruchmodelle unter Berücksichtigung mikromechanischer Vorgänge. Dissertation.
Hardenacke, V.
2015. KIT, Karlsruhe. doi:10.5445/IR/1000051105

Micromechanical finite element modeling of long fiber reinforced thermoplastics. Dissertation.
Fliegener, S.
2015. KIT, Karlsruhe. doi:10.5445/IR/1000051015

PECVD Prozessüberwachung - Wiederholbare Nutzung technischer Plasmen. Dissertation.
Grotjahn, T.
2015. Fraunhofer, Stuttgart

Einfluss der tribochemischen Schmierstoffoxidation auf die wasserstoffinduzierte Wälzkontaktermüdung. Dissertation.
Kürten, D. R.
2015. Fraunhofer, Stuttgart. doi:10.5445/IR/1000050971

Phase field crystal modeling of ternary solidification microstructures.
Berghoff, M.; Nestler, B.
2015. Computational condensed matter, 4, 46–58. doi:10.1016/j.cocom.2015.08.002

Experimental and Numerical Investigation on the Phase Separation Affected by Cooling Rates and Marangoni Convection in Cu-Cr Alloys.
Wang, F.; Klinski-Wetzel, K. von; Mukherjee, R.; Nestler, B.; Heilmaier, M.
2015. Metallurgical and materials transactions / A, 46 (4), 1756–1766. doi:10.1007/s11661-015-2745-3

A phase-field study on the formation of the intermetallic Al2Au phase in the Al-Au system.
Wang, F.; Nestler, B.
2015. Acta materialia, 95 (2), 65–73. doi:10.1016/j.actamat.2015.05.002

On the motion of droplets driven by solutal Marangoni convection in alloy systems with a miscibility gap.
Wang, F.; Selzer, M.; Nestler, B.
2015. Physica D: Nonlinear Phenomena, 307, 82–96. doi:10.1016/j.physd.2015.06.001

Low Speed Crack Propagation via Kink Formation and Advance on the Silicon (110) Cleavage Plane.
Kermode, J. R.; Gleizer, A.; Kovel, G.; Pastewka, L.; Csányi, G.; Sherman, D.; De Vita, A.
2015. Physical Review Letters, 115 (3), Art.Nr. 135501. doi:10.1103/PhysRevLett.115.135501

Microstructural evolution in bitaxial crack-seal veins: A phase-field study.
Ankit, K.; Urai, J. L.; Nestler, B.
2015. Journal of geophysical research / Solid earth, 120 (5), 3096–3118. doi:10.1002/2015JB011934

Phase‐field Modeling of Fracture Cementation Processes in 3‐D.
Ankit, K.; Selzer, M.; Hilgers, C.; Nestler, B.
2015. Journal of Petroleum Science Research, 4 (2), 79–96. doi:10.12783/jpsr.2015.0402.04

Deviations from cooperative growth mode during eutectoid transformation: Mechanisms of polycrystalline eutectoid evolution in Fe-C steels.
Ankit, K.; Mukherjee, R.; Nestler, B.
2015. Acta Materialia, 97, 316–324. doi:10.1016/j.actamat.2015.06.050

Evolution of mixed cementite morphologies during non-cooperative eutectoid transformation in Fe-C steels.
Ankit, K.; Mittnacht, T.; Mukherjee, R.; Nestler, B.
2015. Computational materials science, 108, 342–347. doi:10.1016/j.commatsci.2015.03.002

Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets.
Lenthe, W. C.; Echlin, M. P.; Trenkle, A.; Syha, M.; Gumbsch, P.; Pollock, T. M.
2015. Journal of Applied Crystallography, 48 (4), 1034–1046. doi:10.1107/S1600576715009231

Dynamische Lastverteilung auf einem HPC Framework mit nachrichtenbasierter Kommunikation.
Heisler, C.; Hötzer, J.; Maier, M.; Reiter, A.; Selzer, M.; Nestler, B.
2015. Forschung aktuell, 2015, 16–18

Modellierung und Simulation der Starrkörperbewegung in Rückschlagventilen.
Jainta, M.; Reiter, A.; August, A.; Moik, F.; Nestler, B.
2015. Forschung aktuell, 2015, 13–15

Sonnenbäder am Nordpol: Das Eisbär-Prinzip für Gebäude.
August, A.; Nestler, B.; Kneer, A.
2015. Horizonte : Forschung an Fachhochschulen in Baden-Württemberg, (45), 68

Small strain elasto-plastic multiphase-field model.
Schneider, D.; Schmid, S.; Selzer, M.; Boehlke, T.; Nestler, B.
2015. Computational Mechanics, 55 (1), 27–35. doi:10.1007/s00466-014-1080-7

Phase-field elasticity model based on mechanical jump conditions.
Schneider, D.; Tschukin, O.; Choudhury, A.; Selzer, M.; Böhlke, T.; Nestler, B.
2015. Computational mechanics, 55 (5), 887–901. doi:10.1007/s00466-015-1141-6

Zur Tribologie von strukturierten Skibelägen auf Eis und Schnee. Dissertation.
Böttcher, R.
2015. KIT, Karlsruhe

Entwicklung und Anwendung von Methoden zur Simulation des Trocknens von Suspensionen. Dissertation.
Breinlinger, T.
2015. Fraunhofer, Stuttgart

Größeneffekte bei strukturierten tribologischen Wirkflächen. Dissertation.
Braun, D.
2015. KIT, Karlsruhe. doi:10.5445/IR/1000048548

Skalenübergreifende Modellierung und Optimierung vom atomistischen kristallinen Phasenfeldmodell bis zur mesoskopischen Phasenfeldmethode. Dissertation.
Berghoff, M.
2015. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000048186

Interstitial iron impurities at grain boundaries in silicon: A first-principles study.
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B - Condensed Matter and Materials Physics, 91 (3). doi:10.1103/PhysRevB.91.035309

Atomistic aspects of fracture.
Bitzek, E.; Kermode, J. R.; Gumbsch, P.
2015. International Journal of Fracture. doi:10.1007/s10704-015-9988-2

Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating.
De Barros Bouchet, M. I.; Matta, C.; Vacher, B.; Le-Mogne, T.; Martin, J. M.; Von Lautz, J.; Ma, T.; Pastewka, L.; Otschik, J.; Gumbsch, P.; Moseler, M.
2015. Carbon, 87 (C), 317–329. doi:10.1016/j.carbon.2015.02.041

Atomistically enabled nonsingular anisotropic elastic representation of near-core dislocation stress fields in a-iron.
Seif, D.; Po, G.; Mrovec, M.; Lazar, M.; Elsässer, C.; Gumbsch, P.
2015. Physical Review B - Condensed Matter and Materials Physics, 91 (18), 184102. doi:10.1103/PhysRevB.91.184102

On slip transmission and grain boundary yielding.
Stricker, M.; Gagel, J.; Schmitt, S.; Schulz, K.; Weygand, D.; Gumbsch, P.
2015. Meccanica, 51 (2), 271–278. doi:10.1007/s11012-015-0192-2

Prediction of heat conduction in open-cell foams via the diffuse interface representation of the phase-field method.
August, A.; Ettrich, J.; Rölle, M.; Schmid, S.; Berghoff, M.; Selzer, M.; Nestler, B.
2015. International Journal of Heat and Mass Transfer, 84, 800–808. doi:10.1016/j.ijheatmasstransfer.2015.01.052

Phase-field simulations of large-scale microstructures by integrated parallel algorithms.
Hötzer, J.; Jainta, M.; Vondrous, A.; Ettrich, J.; August, A.; Stubenvoll, D.; Reichardt, M.; Selzer, M.; Nestler, B.
2015. High Performance Computing in Science and Engineering ’14 : Transactions of the High Performance Computing Center, Stuttgart (HLRS), 2014. Hrsg.: W. E. Nagel, 629–644, Springer, Cham. doi:10.1007/978-3-319-10810-0_41

Combined crystal plasticity and phase-field method for recrystallization in a process chain of sheet metal production.
Vondrous, A.; Bienger, P.; Schreijäg, S.; Selzer, M.; Schneider, D.; Nestler, B.; Helm, D.; Mönig, R.
2015. Computational mechanics, 55 (2), 439–452. doi:10.1007/s00466-014-1115-0

Einlaufverhalten von geschmierten Stahl-Stahl-Paarungen unter Berücksichtigung der Mikrostruktur. Dissertation.
Brink, A.
2015. KIT, Karlsruhe. doi:10.5445/IR/1000046413

Surface Softening in Metal - Ceramic Sliding Contacts: An Experimental and Numerical Investigation.
Stoyanov, P.; Merz, R.; Romero, P.; Wählisch, F. C.; Abad, O. T.; Gralla, R.; Stemmer, P.; Kopnarski, M.; Moseler, M.; Bennewitz, R.; Dienwiebel, M.
2015. ACS nano, 9 (2), 1478–1491. doi:10.1021/nn505968m

Micro- and Nanotribology of Graphene.
Dienwiebel, M.; Bennewitz, R.
2015. Fundamentals of Friction and Wear on the Nanoscale, 453–460, Springer, Berlin. doi:10.1007/978-3-319-10560-4_20

Untersuchung des Verschleißverhaltens von keramischen Schneidstoffen im trockenen Gleitreibungskontakt mit Nickelbasislegierungen. Dissertation.
Renz, A.
2015. Fraunhofer, Stuttgart

Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation.
Kümmel, J.; Braun, D.; Gibmeier, J.; Schneider, J.; Greiner, C.; Schulze, V.; Wanner, A.
2015. Journal of Materials Processing Technology, 215, 62–70. doi:10.1016/j.jmatprotec.2014.07.032

2014

Mechanics and Dislocation Structures at the Micro-Scale: Insights on Dislocation Multiplication Mechanisms from Discrete Dislocation Dynamics Simulations.
Weygand, D.
2014. MRS online proceedings library, 1651, mrsf13–1651-kk07. doi:10.1557/opl.2014.362

Internal length scale and grain boundary yield strength in gradient models of polycrystal plasticity: How do they relate to the dislocation microstructure?.
Zhang, X.; Aifantis, K. E.; Senger, J.; Weygand, D.; Zaiser, M.
2014. Journal of materials research, 29 (18), 2116–2128. doi:10.1557/jmr.2014.234

Packungsalgorithmen zur Generierung granularer Partikelstrukturen für die Simulation von Sinterprozessen.
Hötzer, J.; Rölle, M.; Nestler, B.
2014. Forschung aktuell, 2014, 57–60

Molecular Dynamics virtual testing of thermally aged Fe–Cu microstructures obtained from multiscale simulations.
Molnar, D.; Binkele, P.; Mora, A.; Mukherjee, R.; Nestler, B.; Schmauder, S.
2014. Computational materials science, 81, 466–470. doi:10.1016/j.commatsci.2013.08.057

Growth rate distributions for regular two-dimensional grains with Read–Shockley grain boundary energy.
Vondrous, A.; Reichardt, M.; Nestler, B.
2014. Modelling and simulation in materials science and engineering, 22 (2), 025014. doi:10.1088/0965-0393/22/2/025014

Reliability characterization of a soot particle sensor: Analysis of stress- and electromigration in thin-film platinum.
Rusanov, R.; Graf, J.; Rank, H.; Fuchs, T.; Mueller-Fiedler, R.; Kraft, O.
2014. 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2014); Cannes, France, April 1 - 4, 2014, Art.Nr.: 7056639, IEEE, Piscataway (NJ). doi:10.1109/DTIP.2014.7056639

Taming the Untamable - The Art and Science of Diamond Polishing.
Moseler, M.; Pastewka, L.; Hird, J.
2014. Comprehensive hard materials / ed.in chief: V.K. Sarin. Vol. 3: Super hard materials. Ed.: Ch. E. Nebel, 81–98, Elsevier, Amsterdam. doi:10.1016/B978-0-08-096527-7.00042-8

Contact between rough surfaces and a criterion for macroscopic adhesion.
Pastewka, L.; Robbins, M. O.
2014. Proceedings of the National Academy of Sciences of the United States of America, 111 (9), 3298–3303. doi:10.1073/pnas.1320846111

Wear, Plasticity, and Rehybridization in Tetrahedral Amorphous Carbon.
Kunze, T.; Posselt, M.; Gemming, S.; Seifert, G.; Konicek, A. R.; Carpick, R. W.; Pastewka, L.; Moseler, M.
2014. Tribology Letters, 53 (1), 119–126. doi:10.1007/s11249-013-0250-7

Atomistic simulation of the deformation of nanocrystalline palladium: the effect of voids.
Bachurin, D.; Gumbsch, P.
2014. Modelling and Simulation in Materials Science and Engineering, 22 (2), 025011. doi:10.1088/0965-0393/22/2/025011

Non-Destructive Evaluation of 3D Microstructure Evolution during Sintering of Strontium Titanate.
Gumbsch, P.; Syha, M.; Lödermann, B.; Trenkle, A.; Graff, A.
2014. International Journal of Advanced Microscopy and Theoretical Calculations. Special issue: Proceedings of the 4th International Symposium on Advanced Microscopy and Theoretical Calculations (AMTC4). Ed.: T. Hirayama, 80–81, Japan Fine Ceramics Center, Nagoya

Contact Splitting and the Effect of Dimple Depth on Static Friction of Textured Surfaces.
Greiner, C.; Schäfer, M.; Popp, U.; Gumbsch, P.
2014. ACS Applied Materials & Interfaces, 6 (11), 7986–7990. doi:10.1021/am500879m

Praxisnahe Versagensbeschreibung bei der Umformung von Feinblechen.
Merklein, M.; Gröbel, D. G.; Gumbsch, P.; Butz, A.; Helm, D.
2014. EFB-Verlag, Hannover

3D microstructure modeling of long fiber reinforced thermoplastics.
Fliegener, S.; Luke, M.; Gumbsch, P.
2014. Composites Science and Technology, 104, 136–145. doi:10.1016/j.compscitech.2014.09.009

Phase-field modeling of diffusion coupled crack propagation processes.
Schneider, D.; Selzer, M.; Bette, J.; Rementeria, I.; Vondrous, A.; Hoffmann, M. J.; Nestler, B.
2014. Advanced Engineering Materials, 16 (2), 142–146. doi:10.1002/adem.201300073

Atomic scale mechanisms of friction reduction and wear protection by graphene.
Klemenz, A.; Pastewka, L.; Balakrishna, S. G.; Caron, A.; Bennewitz, R.; Moseler, M.
2014. Nano Letters, 14 (12), 7145–7152. doi:10.1021/nl5037403

Surface passivation and boundary lubrication of self-mated tetrahedral amorphous carbon asperities under extreme tribological conditions.
Romero, P. A.; Pastewka, L.; von Lautz, J.; Moseler, M.
2014. Friction, 2 (2), 193–208. doi:10.1007/s40544-014-0057-z

Deviations from cooperative growth mode during eutectoid transformation: Insights from a phase-field approach.
Ankit, K.; Mukherjee, R.; Mittnacht, T.; Nestler, B.
2014. Acta Materialia, 81, 204–210. doi:10.1016/j.actamat.2014.08.015

Virtuelle Material- und Prozessentwicklung am Beispiel der Konstrukturausbildung in Schweißnähten.
Nestler, B.; Tschukin, O.; Jainta, M.; Daubermann, M.; Selzer, M.; Widak, V.; Hoffmann, J.; Rieth, M.
2014. Forschungsreport für den Maschinenbau in Baden-Württemberg, 2014, 56–58

Three-dimensional phase-field study of crack-seal microstructures - insights from innovative post-processing techniques.
Ankit, K.; Selzer, M.; Nestler, B.
2014. Geoscientific model development discussions, 7, 631–658. doi:10.5194/gmdd-7-631-2014

Metallische Schneeflocken.
Wesner, E.; August, A.; Nestler, B.
2014. Horizonte : Forschung an Fachhochschulen in Baden-Württemberg, (43), 29–31

Modelling of transient heat conduction with diffuse interface methods.
Ettrich, J.; Choudhury, A.; Tschukin, O.; Schoof, E.; August, A.; Nestler, B.
2014. Modelling and simulation in materials science and engineering, 22 (8), Art.Nr. 085006/1–29. doi:10.1088/0965-0393/22/8/085006

Mechanische und Strömungsmechanische Topologieoptimierung mit der Phasenfeldmethode. Dissertation.
Selzer, M.
2014. KIT, Karlsruhe. doi:10.5445/IR/1000049243

Carbon nanotubes/silicon nitride nanocomposites for gasoline lubricated high pressure pumps.
Pfister, C.; Schneider, J.; Miranzo, P.; Osendi, M. I.; Belmonte, M.
2014. Composites / B, 64, 168–174. doi:10.1016/j.compositesb.2014.04.017

Robust and wear resistant in-situ carbon nanotube/Si3N 4 nanocomposites with a high loading of nanotubes.
Gonzalez-Julian, J.; Datye, A.; Wu, K.-H.; Schneider, J.; Belmonte, M.
2014. Carbon, 72, 338–347. doi:10.1016/j.carbon.2014.02.014

Efficiency of laser surface texturing in the reduction of friction under mixed lubrication.
Braun, D.; Greiner, C.; Schneider, J.; Gumbsch, P.
2014. Tribology International, 77, 142–147. doi:10.1016/j.triboint.2014.04.012

Origin of anomalous slip in tungsten.
Marichal, C.; Srivastava, K.; Weygand, D.; Van Petegem, S.; Grolimund, D.; Gumbsch, P.; Van Swygenhoven, H.
2014. Physical Review Letters, 113 (2), 025501. doi:10.1103/PhysRevLett.113.025501

Dislocation junctions as indicators of elementary slip planes in body-centered cubic metals.
Srivastava, K.; Weygand, D.; Gumbsch, P.
2014. Journal of Materials Science, 49 (20), 7333–7337. doi:10.1007/s10853-014-8447-1

Lithium diffusion in the spinel phase Li4Ti5O12 and in the rocksalt phase Li7Ti5O12 of lithium titanate from first principles.
Ziebarth, B.; Klinsmann, M.; Eckl, T.; Elsässer, C.
2014. Physical Review B, 89 (17), 174301. doi:10.1103/PhysRevB.89.174301

Potential-induced degradation in solar cells: Electronic structure and diffusion mechanism of sodium in stacking faults of silicon.
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
2014. Journal of applied physics, 116 (9), 093510. doi:10.1063/1.4894007

Dipole formation and yielding in a two-dimensional continuum dislocation model.
Dickel, D.; Schulz, K.; Schmitt, S.; Gumbsch, P.
2014. Physical Review B, 90 (9, Art.094118), 1–8. doi:10.1103/PhysRevB.90.094118

Origins of Folding Instabilities on Polycrystalline Metal Surfaces.
Beckmann, N.; Romero, P. A.; Linsler, D.; Dienwiebel, M.; Stolz, U.; Moseler, M.; Gumbsch, P.
2014. Applied physics reviews, 2 (6), Art.Nr.: 064004. doi:10.1103/PhysRevApplied.2.064004

Numerical study on solutal Marangoni instability in finite systems with a miscibility gap.
Wang, F.; Mukherjee, R.; Selzer, M.; Nestler, B.
2014. Physics of fluids, 26 (12), Art.Nr. 1.4902355. doi:10.1063/1.4902355

Electron microscopic evidence for a tribologically induced phase transformation as the origin of wear in diamond.
Zhang, X.; Schneider, R.; Müller, E.; Mee, M.; Meier, S.; Gumbsch, P.; Gerthsen, D.
2014. Journal of Applied Physics, 115 (6), 063508. doi:10.1063/1.4865742

Pentamode metamaterials with independently tailored bulk modulus and mass density.
Kadic, M.; Bückmann, T.; Schittny, R.; Gumbsch, P.; Wegener, M.
2014. Physical Review Applied, 2 (5), 054007/1–7. doi:10.1103/PhysRevApplied.2.054007

TEM and STEM/EELS Studies of Diamond-Like Carbon (DLC) Films and Diamond Films. Dissertation.
Zhang, X.
2014. KIT, Karlsruhe. doi:10.5445/IR/1000044927

In situ tensile testing of nanoscale Cu/Nb multiliayers.
Lohmiller, J.; Polyakov, M. N.; Hodge, A. M.; Doyle, S.; Gruber, P. A.
2014. ANKA User Reports 2012/2013, 90–91, KIT, Karlsruhe

Grain growth behavior and efficient large scale simulations of recrystallization with the phase-field method. Dissertation.
Vondrous, A.
2014. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000043520

KIT Data Manager: The Repository Architecture Enabling Cross-Disciplinary Research.
Jejkal, T.; Vondrous, A.; Kopmann, A.; Stotzka, R.; Hartmann, V.
2014. Large-Scale Data Management and Analysis (LSDMA) - Big Data in Science. Hrsg.: Ch. Jung, 9–11, KIT, Karlsruhe

Numerische Untersuchung des Wärmeübertragungsverhaltens in unterschiedlichen porösen Medien. Dissertation.
Kneer, A.
2014. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000042451

Atomistically-informed discrete dislocation dynamics modeling of plastic flow in body-centered cubic metals. Dissertation.
Srivastava, K.
2014. KIT, Karlsruhe. doi:10.5445/IR/1000042367

Microstructure evolution in strontium titanate Investigated by means of grain growth simulations and x-ray diffraction contrast tomography experiments. Dissertation.
Syha, M.
2014. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000042175

Fluid Flow and Heat Transfer in Cellular Solids. Dissertation.
Ettrich, J.
2014. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000042041

A Continuum Formulation of Stress Correlations of Dislocations in Two Dimensions.
Dickel, D.; Schulz, K.; Schmitt, S.; Gumbsch, P.
2014. Technische Mechanik, 34 (3-4), 205–212

Untersuchungen zum Einlaufverhalten binärer alpha-Messinglegierungen unter Ölschmierung in Abhängigkeit des Zinkgehaltes. Dissertation.
Feser, T.
2014. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000041146

Reducing the computational effort of optimal process controllers for continuous state spaces by using incremental learning and post-decision state formulations.
Senn, M.; Link, N.; Pollak, J.; Lee, J. H.
2014. Journal of Process Control, 24 (3), 133–143. doi:10.1016/j.jprocont.2014.01.002

Analysis of dislocation pile-ups using a dislocation-based continuum theory.
Schulz, K.; Dickel, D.; Schmitt, S.; Sandfeld, S.; Weygand, D.; Gumbsch, P.
2014. Modelling and Simulation in Materials Science and Engineering, 22 (2), 025008. doi:10.1088/0965-0393/22/2/025008

Scale-bridging phase-field simulations of microstructure responses on nucleation in metals and colloids.
Berghoff, M.; Nestler, B.
2014. European physical journal special topics, 223 (3), 409–419. doi:10.1140/epjst/e2014-02099-8

A Phase-Field Approach for Wetting Phenomena of Multiphase Droplets on Solid Surfaces.
Ben Said, M.; Selzer, M.; Nestler, B.; Braun, D.; Greiner, C.; Garcke, H.
2014. Langmuir, 30 (14), 4033–4039. doi:10.1021/la500312q

Nanoscale sliding friction phenomena at the interface of diamond-like carbon and tungsten.
Stoyanov, P.; Romero, P. A.; Merz, R.; Kopnarski, M.; Stricker, M.; Stemmer, P.; Dienwiebel, M.; Moseler, M.
2014. Acta Materialia, 67, 395–408. doi:10.1016/j.actamat.2013.12.029

Free energy of melts and intermetallic compounds of binary alloys determined by a molecular dynamics approach.
Guerdane, M.
2014. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 89 (2), 023308. doi:10.1103/PhysRevE.89.023308

Continuum dislocation dynamics: Towards a physical theory of crystal plasticity.
Hochrainer, T.; Sandfeld, S.; Zaiser, M.; Gumbsch, P.
2014. Journal of the Mechanics and Physics of Solids, 63 (1), 167–178. doi:10.1016/j.jmps.2013.09.012

Parallel computing for phase-field models.
Vondrous, A.; Selzer, M.; Hötzer, J.; Nestler, B.
2014. The international journal of high performance computing applications, 28 (1), 61–72. doi:10.1177/1094342013490972