Home | deutsch  | Legals | Data Protection | Sitemap | KIT
2005
Title Author Source

Fraunhofer IRB Verlag: Aktuelle Trends in der Softwareforschung, ISBN 3-8167-6955-1, (2005) 307-310

Fraunhofer IRB Verlag: Aktuelle Trends in der Softwareforschung, ISBN 3-8167-6955-1, (2005) 239-258

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 51-56

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 124-130

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 161-169

Acta Biomaterialia, 1 (6), 705-716 (2005)

D. Nguyen-Manh, M. J. Cawkwell, R. Groger, M. Mrovec, R. Porizek, D. G. Pettifor, V. Vitek Materials Science and Engineering A 400-401, 68 (2005)
M.J. Cawkwell, M. Mrovec, D. Nguyen-Manh, D.G. Pettifor, V. Vitek Integrative and Interdisciplinary Aspects of Intermetallics, Mater. Res. Soc. Symp. Proc. 842, S6.2 (2005)

, J. Herz, N. Huber, J. Schneider, K.–H. Zum Gahr

Proceedings Kolloquium Mikroproduktion, Aachen, Germany March 2 - 3, 2005, p. 143 - 150. (in german)

V. Hegadekatte, N. Huber, O. Kraft

Proceedings 1st Vienna International Conference on Micro- and Nano-Technology, Vienna, Austria, March 9 - 11, 2005, p. 181 - 190

Surface Science 576, Seiten 197-211 (2005)

Review of Scientific Instruments 76, 043704 (2005)

Physical Review E 71, 065101R (2005)

Proceedings 11th International Conference on Fracture, Paper No. 5700, Turin, March 20 - 25 2005, on CD

Proceedings World Tribology Congress III, Washington, USA, Sept. 12 - 16, 2005, on CD

Micro-Engineering in Metals and Ceramics Design Part II, Volume Ed.: D. Löhe, J. H. Haußelt (Advanced Micro and Nano Systems Vol. 4, Ed.: H. Baltes, O. Brand, G. K. Fedder, C. Hierold, J. G. Korvink and O. Tabata), Wiley-VCH Verlag GmbH, Weinheim, Germany, 2005 (ISBN 3-527-31493-8)

E. Bitzek and P. Gumbsch Materials Science & Engineering A 400-401 (2005), pp. 40-44

J. Büttner, N. Huber, M. Bruns, O. Kraft

IEEE Transactions on Device and Materials Reliability, Vol. 4, No. 3, 549-555, 2004

L. Delonnoy, T. Hochrainer, V. Schulze, D. Löhe, P. Gumbsch

Zeitschrift für Metallkunde 96/7 (2005) 761-769

C. Elsässer and P. Gumbsch Physik Journal 4 (2005) Nr. 1, 23-28

T. Fett,O. Kraft, D. Munz

Materialwissenschaft und Werkstofftechnik, 36, S.163-170, 2005

P. Gumbsch Handbook of Materials Modeling, edited by S. Yip, Springer Verlag, Netherlands (2005), pp. 2713-2718
A. Hartmaier and P. Gumbsch Physical Review B 71, 024108 (2005), 1-11

V. Hegadekatte, N. Huber, O. Kraft

Modelling and Simulation in Materials Science and Engineering 13, 57-75, 2005

T. Hochrainer, L. Delonnoy, J. Kotschenreuther, V. Schulze, D. Löhe, P. Gumbsch und J. Fleischer Proc. of 8th CIRP International Workshop on Modeling of Machining Operations, S. 123-130, Chemnitz, D, 2005
M. E. Kassner, S. Nemat-Nasser, Z. Suo, G. Bao, J. C. Barbour, L. C. Brinson, H. Espinosa, H. Gao, S. Granick, P. Gumbsch, K-S. Kim, W. Knauss, L. Kubin, J. Langer, B. C. Larson, L. Mahadevan, A. Majumdar, S. Torquato, and F. van Swol Mechanics of Materials 37 (2005), 231-259
J. Kotschenreuther, L. Delonnoy, T. Hochrainer, M. Weber, J. Schmidt, J. Fleischer, V. Schulze, D. Löhe, und P. Gumbsch F. Vollertsen, Hrsg., Prozessskalierung, S. 219-240, Bremen, D, 2005. BIAS-Verlag
T. Kraft, H. Riedel, and P. Gumbsch 16th international Plansee Seminar, Powder Metallurgical High Performance Materials, Conference Proceedings, edited by Günter Kneringer, Peter Rödhammer and Heiko Wildner, Plansee Holding AG, Reutte, Tyrol, Austria (2005), Volume 2, pp. 9-23

C. Mattheck, K. Bethge, I. Tesari, M. Scherrer, O. Kraft

Der Konstrukteur, 6, S.58-60, Juni 2005

C. Mattheck, R. Kappel, K. Bethge, O. Kraft

Konstruktionspraxis Spezial II-2005, S. 50-52

M. Moseler, P. Gumbsch, C. Casiraghi, A. C. Ferrari, and J. Robertson Science, 309 (2005), pp. 1545-1548
M. Moseler, H. Riedel, P. Gumbsch, J. Stäring, and B. Mehlig Physical Review Letter 94, 165503 (2005), 1-4

F. Rösch, C. Rudhart, J. Roth, H.-R. Trebin, P. Gumbsch

Phys. Rev. B 72 (2005) 014128

S. Roudi, H. Riesch-Oppermann, O. Kraft

Materialwissenschaft und Wekstofftechnik, No 3/4, S. 171-176, 2005

C. Rudhart, P. Gumbsch, H.-R. Trebin

Phil. Mag. 85 (2005) 3259-3272

E. Tyulyukovskiy, N. Huber, O. Kraft

Materialwissenschaft und Wekstofftechnik 2005, No 3/4, S157-162, 2005

Y. Umeno, A. Kushima, T. Kitamura, P. Gumbsch, J. Li

Physical Review B 72 (2005) 165431, 1-7

M. Vogel, O. Kraft, E. Arzt

Metallurgical Transaction A 36, 1713-1719, 2005

A. Walcker, D. Weygand, O. Kraft Mat. Sci. Eng A (2005) 397-400
D. Weygand, P. Gumbsch Mat. Sci. Eng A (2005) 158-161

G.P. Zhang, C.A. Volkert, R. Schwaiger, E. Arzt, O. Kraft

Journal of Materials Research 20, 1, 2005, 201-207, 2005