2005
Title Author Source

, J. Herz, N. Huber, J. Schneider, K.–H. Zum Gahr

Proceedings Kolloquium Mikroproduktion, Aachen, Germany March 2 - 3, 2005, p. 143 - 150. (in german)

Proceedings World Tribology Congress III, Washington, USA, Sept. 12 - 16, 2005, on CD

Micro-Engineering in Metals and Ceramics Design Part II, Volume Ed.: D. Löhe, J. H. Haußelt (Advanced Micro and Nano Systems Vol. 4, Ed.: H. Baltes, O. Brand, G. K. Fedder, C. Hierold, J. G. Korvink and O. Tabata), Wiley-VCH Verlag GmbH, Weinheim, Germany, 2005 (ISBN 3-527-31493-8)

A. Hartmaier and P. Gumbsch Physical Review B 71, 024108 (2005), 1-11
A. Walcker, D. Weygand, O. Kraft Mat. Sci. Eng A (2005) 397-400

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 51-56

Fraunhofer IRB Verlag: Aktuelle Trends in der Softwareforschung, ISBN 3-8167-6955-1, (2005) 307-310

Fraunhofer IRB Verlag: Aktuelle Trends in der Softwareforschung, ISBN 3-8167-6955-1, (2005) 239-258

C. Elsässer and P. Gumbsch Physik Journal 4 (2005) Nr. 1, 23-28

Acta Biomaterialia, 1 (6), 705-716 (2005)

C. Mattheck, K. Bethge, I. Tesari, M. Scherrer, O. Kraft

Der Konstrukteur, 6, S.58-60, Juni 2005

C. Mattheck, R. Kappel, K. Bethge, O. Kraft

Konstruktionspraxis Spezial II-2005, S. 50-52

C. Rudhart, P. Gumbsch, H.-R. Trebin

Phil. Mag. 85 (2005) 3259-3272

D. Nguyen-Manh, M. J. Cawkwell, R. Groger, M. Mrovec, R. Porizek, D. G. Pettifor, V. Vitek Materials Science and Engineering A 400-401, 68 (2005)
D. Weygand, P. Gumbsch Mat. Sci. Eng A (2005) 158-161
E. Bitzek and P. Gumbsch Materials Science & Engineering A 400-401 (2005), pp. 40-44

E. Tyulyukovskiy, N. Huber, O. Kraft

Materialwissenschaft und Wekstofftechnik 2005, No 3/4, S157-162, 2005

F. Rösch, C. Rudhart, J. Roth, H.-R. Trebin, P. Gumbsch

Phys. Rev. B 72 (2005) 014128

G.P. Zhang, C.A. Volkert, R. Schwaiger, E. Arzt, O. Kraft

Journal of Materials Research 20, 1, 2005, 201-207, 2005

J. Büttner, N. Huber, M. Bruns, O. Kraft

IEEE Transactions on Device and Materials Reliability, Vol. 4, No. 3, 549-555, 2004

J. Kotschenreuther, L. Delonnoy, T. Hochrainer, M. Weber, J. Schmidt, J. Fleischer, V. Schulze, D. Löhe, und P. Gumbsch F. Vollertsen, Hrsg., Prozessskalierung, S. 219-240, Bremen, D, 2005. BIAS-Verlag

L. Delonnoy, T. Hochrainer, V. Schulze, D. Löhe, P. Gumbsch

Zeitschrift für Metallkunde 96/7 (2005) 761-769

Review of Scientific Instruments 76, 043704 (2005)

M. E. Kassner, S. Nemat-Nasser, Z. Suo, G. Bao, J. C. Barbour, L. C. Brinson, H. Espinosa, H. Gao, S. Granick, P. Gumbsch, K-S. Kim, W. Knauss, L. Kubin, J. Langer, B. C. Larson, L. Mahadevan, A. Majumdar, S. Torquato, and F. van Swol Mechanics of Materials 37 (2005), 231-259
M. Moseler, H. Riedel, P. Gumbsch, J. Stäring, and B. Mehlig Physical Review Letter 94, 165503 (2005), 1-4
M. Moseler, P. Gumbsch, C. Casiraghi, A. C. Ferrari, and J. Robertson Science, 309 (2005), pp. 1545-1548

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 124-130

M. Vogel, O. Kraft, E. Arzt

Metallurgical Transaction A 36, 1713-1719, 2005

M.J. Cawkwell, M. Mrovec, D. Nguyen-Manh, D.G. Pettifor, V. Vitek Integrative and Interdisciplinary Aspects of Intermetallics, Mater. Res. Soc. Symp. Proc. 842, S6.2 (2005)

Surface Science 576, Seiten 197-211 (2005)

Proceedings 11th International Conference on Fracture, Paper No. 5700, Turin, March 20 - 25 2005, on CD

P. Gumbsch Handbook of Materials Modeling, edited by S. Yip, Springer Verlag, Netherlands (2005), pp. 2713-2718

S. Roudi, H. Riesch-Oppermann, O. Kraft

Materialwissenschaft und Wekstofftechnik, No 3/4, S. 171-176, 2005

Physical Review E 71, 065101R (2005)

T. Fett,O. Kraft, D. Munz

Materialwissenschaft und Werkstofftechnik, 36, S.163-170, 2005

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 161-169

T. Hochrainer, L. Delonnoy, J. Kotschenreuther, V. Schulze, D. Löhe, P. Gumbsch und J. Fleischer Proc. of 8th CIRP International Workshop on Modeling of Machining Operations, S. 123-130, Chemnitz, D, 2005
T. Kraft, H. Riedel, and P. Gumbsch 16th international Plansee Seminar, Powder Metallurgical High Performance Materials, Conference Proceedings, edited by Günter Kneringer, Peter Rödhammer and Heiko Wildner, Plansee Holding AG, Reutte, Tyrol, Austria (2005), Volume 2, pp. 9-23

V. Hegadekatte, N. Huber, O. Kraft

Proceedings 1st Vienna International Conference on Micro- and Nano-Technology, Vienna, Austria, March 9 - 11, 2005, p. 181 - 190

V. Hegadekatte, N. Huber, O. Kraft

Modelling and Simulation in Materials Science and Engineering 13, 57-75, 2005

Y. Umeno, A. Kushima, T. Kitamura, P. Gumbsch, J. Li

Physical Review B 72 (2005) 165431, 1-7