2005
Title Author Source
T. Kraft, H. Riedel, and P. Gumbsch 16th international Plansee Seminar, Powder Metallurgical High Performance Materials, Conference Proceedings, edited by Günter Kneringer, Peter Rödhammer and Heiko Wildner, Plansee Holding AG, Reutte, Tyrol, Austria (2005), Volume 2, pp. 9-23

Acta Biomaterialia, 1 (6), 705-716 (2005)

C. Mattheck, K. Bethge, I. Tesari, M. Scherrer, O. Kraft

Der Konstrukteur, 6, S.58-60, Juni 2005

J. Kotschenreuther, L. Delonnoy, T. Hochrainer, M. Weber, J. Schmidt, J. Fleischer, V. Schulze, D. Löhe, und P. Gumbsch F. Vollertsen, Hrsg., Prozessskalierung, S. 219-240, Bremen, D, 2005. BIAS-Verlag

Fraunhofer IRB Verlag: Aktuelle Trends in der Softwareforschung, ISBN 3-8167-6955-1, (2005) 239-258

Fraunhofer IRB Verlag: Aktuelle Trends in der Softwareforschung, ISBN 3-8167-6955-1, (2005) 307-310

P. Gumbsch Handbook of Materials Modeling, edited by S. Yip, Springer Verlag, Netherlands (2005), pp. 2713-2718

J. Büttner, N. Huber, M. Bruns, O. Kraft

IEEE Transactions on Device and Materials Reliability, Vol. 4, No. 3, 549-555, 2004

M.J. Cawkwell, M. Mrovec, D. Nguyen-Manh, D.G. Pettifor, V. Vitek Integrative and Interdisciplinary Aspects of Intermetallics, Mater. Res. Soc. Symp. Proc. 842, S6.2 (2005)

G.P. Zhang, C.A. Volkert, R. Schwaiger, E. Arzt, O. Kraft

Journal of Materials Research 20, 1, 2005, 201-207, 2005

C. Mattheck, R. Kappel, K. Bethge, O. Kraft

Konstruktionspraxis Spezial II-2005, S. 50-52

D. Weygand, P. Gumbsch Mat. Sci. Eng A (2005) 158-161
A. Walcker, D. Weygand, O. Kraft Mat. Sci. Eng A (2005) 397-400
E. Bitzek and P. Gumbsch Materials Science & Engineering A 400-401 (2005), pp. 40-44
D. Nguyen-Manh, M. J. Cawkwell, R. Groger, M. Mrovec, R. Porizek, D. G. Pettifor, V. Vitek Materials Science and Engineering A 400-401, 68 (2005)

E. Tyulyukovskiy, N. Huber, O. Kraft

Materialwissenschaft und Wekstofftechnik 2005, No 3/4, S157-162, 2005

S. Roudi, H. Riesch-Oppermann, O. Kraft

Materialwissenschaft und Wekstofftechnik, No 3/4, S. 171-176, 2005

T. Fett,O. Kraft, D. Munz

Materialwissenschaft und Werkstofftechnik, 36, S.163-170, 2005

M. E. Kassner, S. Nemat-Nasser, Z. Suo, G. Bao, J. C. Barbour, L. C. Brinson, H. Espinosa, H. Gao, S. Granick, P. Gumbsch, K-S. Kim, W. Knauss, L. Kubin, J. Langer, B. C. Larson, L. Mahadevan, A. Majumdar, S. Torquato, and F. van Swol Mechanics of Materials 37 (2005), 231-259

M. Vogel, O. Kraft, E. Arzt

Metallurgical Transaction A 36, 1713-1719, 2005

Micro-Engineering in Metals and Ceramics Design Part II, Volume Ed.: D. Löhe, J. H. Haußelt (Advanced Micro and Nano Systems Vol. 4, Ed.: H. Baltes, O. Brand, G. K. Fedder, C. Hierold, J. G. Korvink and O. Tabata), Wiley-VCH Verlag GmbH, Weinheim, Germany, 2005 (ISBN 3-527-31493-8)

V. Hegadekatte, N. Huber, O. Kraft

Modelling and Simulation in Materials Science and Engineering 13, 57-75, 2005

C. Rudhart, P. Gumbsch, H.-R. Trebin

Phil. Mag. 85 (2005) 3259-3272

F. Rösch, C. Rudhart, J. Roth, H.-R. Trebin, P. Gumbsch

Phys. Rev. B 72 (2005) 014128

A. Hartmaier and P. Gumbsch Physical Review B 71, 024108 (2005), 1-11

Y. Umeno, A. Kushima, T. Kitamura, P. Gumbsch, J. Li

Physical Review B 72 (2005) 165431, 1-7

Physical Review E 71, 065101R (2005)

M. Moseler, H. Riedel, P. Gumbsch, J. Stäring, and B. Mehlig Physical Review Letter 94, 165503 (2005), 1-4
C. Elsässer and P. Gumbsch Physik Journal 4 (2005) Nr. 1, 23-28
T. Hochrainer, L. Delonnoy, J. Kotschenreuther, V. Schulze, D. Löhe, P. Gumbsch und J. Fleischer Proc. of 8th CIRP International Workshop on Modeling of Machining Operations, S. 123-130, Chemnitz, D, 2005

Proceedings 11th International Conference on Fracture, Paper No. 5700, Turin, March 20 - 25 2005, on CD

V. Hegadekatte, N. Huber, O. Kraft

Proceedings 1st Vienna International Conference on Micro- and Nano-Technology, Vienna, Austria, March 9 - 11, 2005, p. 181 - 190

, J. Herz, N. Huber, J. Schneider, K.–H. Zum Gahr

Proceedings Kolloquium Mikroproduktion, Aachen, Germany March 2 - 3, 2005, p. 143 - 150. (in german)

Proceedings World Tribology Congress III, Washington, USA, Sept. 12 - 16, 2005, on CD

Review of Scientific Instruments 76, 043704 (2005)

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 124-130

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 161-169

SCS Publishing House e. V.: Frontiers in Simulation, ISBN 3-936150-41-9, (2005) 51-56

M. Moseler, P. Gumbsch, C. Casiraghi, A. C. Ferrari, and J. Robertson Science, 309 (2005), pp. 1545-1548

Surface Science 576, Seiten 197-211 (2005)

L. Delonnoy, T. Hochrainer, V. Schulze, D. Löhe, P. Gumbsch

Zeitschrift für Metallkunde 96/7 (2005) 761-769