Preparation of multiple-cation alpha-SiAlON ceramics containing lanthanum
- Author: Mandal, H.; Hoffmann, M. J.
- Source: JOURNAL OF THE AMERICAN CERAMIC SOCIETY 82 (1999), 1, 229–232
- Preparation of multiple-cation alpha-SiAlON ceramics containing lanthanum.
Until recently, it was accepted that Ce3+ cations, with an ionic radius (r) of 1.03 Angstrom, were too large to form an alpha-SiAlON structure. However, more-recent studies have shown that cerium cations can be incorporated into alpha-SiAlON via quenching at a rate of 600 degrees C/min, after sintering at 1800 degrees C. Thus far, no alpha-SiAlON formation has been observed for La3+ cations with r = 1.06 Angstrom. In the present work, the possibility of having the La3+ species as a dopant cation in alpha-SiAlON has been investigated by using La2O3 alone or in equimolar mixtures with CaO or Yb2O3. The resulting materials have been heat-treated at a temperature of 1450 degrees C for up to 720 h to devitrify the grain-boundary glass into crystalline phases and also to observe the alpha --> beta SiAlON transformation. X-ray diffractometry on samples that were densified with single cations revealed that the La3+ cation alone does not form an alpha-SiAlON; rather, it forms the N-phase (La3Si8O4N11) with a beta-SiAlON phase. In the case of multiple cations, alpha-SiAlON was observed only as a matrix phase. Energy-dispersive X-ray measurements have proven that La3+ cations can be accommodated into the alpha-SiAlON structure and this structure also does not transform to beta-SiAlON at lower temperatures.