T. Böhlke, K. Jöchen, O. Kraft, D. Löhe, V. Schulze:
Elastic properties of polycrystalline microcomponents
Mechanics of Materials 42 (2010) S. 11 - 23
Material parameter identification of interpenetrating metal-ceramic composites
Key Engineering Materials Vols. 417-418 (2010) S. 53 - 56
V. Kostov, J. Gibmeier, S. Doyle, A. Wanner:
Real time monitoring of the strain evolution during rapid heat treatment of steel samples by means of synchrotron X-ray diffraction
Materials Science Forum Vols. 638-642 (2010) S. 2423 - 2428
H. Autenrieth, M. Weber, M. Deuchert, V. Schulze:
Investigation of the surface characteristics for the micro-cutting process with finite element simulation
Materials Science Forum Vols. 638-642 (2010) S. 2531 - 2536
Minimum-weight materials selection for limited available space
Materials and Design 31 (2010) S. 2834 - 2839
M. Müller, J. Rögner, B. Okolo, W. Bauer, R. Knitter:
Processing of micro-components made of sintered reaction-bonded silicon nitride (SRBSN). Part 2: Sintering behaviour and micro-mechanical properties
Ceramics International 36 (2010) S. 707 - 717
B. Okolo, J. Rögner, E. Kerscher, T. Beck, V. Schulze, A. Wanner, D. Löhe:
Size Effects in Aluminium Bronze Cast Specimens
Smart Sytems Integration and Reliability - Honorary volume on the occasion of Herbert Reichl’s birthday (2010) S. 740 - 747
J. Rögner, B. Okolo, J. Schneider, K.-H. Lang, A. Wanner, V. Schulze:
Charakterisierung und Prüfung von Mikrobauteilen
4. Kolloquium Mikropoduktion (2009) S. 105 - 110
F. A. Çetinel, M. Müller, J. Rögner, W. Bauer, J. Hausselt:
Influence of dispersant on rheology of zirconia-paraffin feedstocks and mechanical properties of micro parts fabricated via LPIM
34th International Conference on Advanced Ceramics & Composites (2010) S. 1-13
M. Zimmermann, V. Schulze, J. Hoffmeister:
Finite element modelling of coverage effects during shot peening of IN718
Int. J. Mat. Res. (Formerly Z. Metallkd.) 101 (2010) S. 951 - 962
T. Schwind, S. Fünfschilling, E. Kerscher, K.-H. Lang, R. Oberacker,
M.J. Hoffmann, T. Fett:
Failure of Alumina in Torsion Tests
Advanced Engineering Materials 2010, 12, No.9, S. 942-947
M. Zimmermann, M. Klemenz, V. Schulze:
International Journal of Computational Materials Science and Surface Engineering 3 (2010) 289–310
S. Dietrich, J. Kuppinger, P. Elsner, K. Weidenmann:
Mechanical properties of compound extruded aircraft stringer profiles under cyclic loading
Adv. Eng. Mater., 12 [7] 2010, S. 584-586
M. Marré, C. Weddeling, T. Hammers, M. Merzkirch, J. Rautenberg, E. Tekkaya, V. Schulze, D. Biermann, A. Zabel:
Innovative joining methods for lightweight designs, Part II, In: Aluminium, International Journal for Industry, Research and Application, [3] 2010, S. 55-59
S. Huber, M. Ruhstorfer, T. Hammers, M. Kronthaler, M.F. Zaeh, V. Schulze:
Innovative joining methods for lightweight designs, Part I
Aluminium, International Journal for Industry, Research and Application, [1/2] 2010, S. 78-83
S. Roy, J. Gibmeier, V. Kostov, K.A. Weidenmann, A. Nagel, A. Wanner
Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure
D. Gelmedin, K.-H. Lang:
Fatigue Behaviour of IN713 under LCF-, HCF-and superimposed LCF/HCF- loading
Procedia Engineering 2 (2010) 1343-1352
J. Kuppinger, K. Weidenmann, M. Kordick, F. Wafzig, F. Henning, P. Elsner:
Influence of fibre length and concentration on the mechanical properties of long glass fibre reinforced polyurethane, Journal of Plastics Technology 5 (2010), S. 205-227
J.-M. Gebert, B. Reznik, R. Piat, B. Viering, K.A. Weidenmann, A. Wanner, O. Deutschmann:
Elastic constants of high-texture pyrolytic carbon measured by ultrasound phase spectroscopy, Carbon; 48 (12) (2010), S. 3635-3658
V. Schulze, C. Becke, K.A. Weidenmann, S. Dietrich:
Machining Strategies for Hole Making in Composites with Minimal Workpiece Damage by Directing the Process Forces Inwards, Journal of Materials Processing Technology (2010)
B. Brylka, F. Fritzen,T. Böhlke, K.A. Weidenmann.:
Study of Experimental Methods for Interface Problems Based on Virtual Testing. PAMM - Proc. Appl. Math. Mech. 10 (2010), S. 109 – 110
R. Piat, S. Dietrich, J.-M. Gebert, G. Stasiuk, K.A. Weidenmann, A. Wanner, T. Böhlke, B. Drach, I. Tsukrov, A. Bussiba:
Micromechanical Modeling of CFCs Using Different Pore Approximations. In Ed: Krenkel W., Lamon J.: High Temperature Ceramic Materials and Composites, AVISO Verlagsgesellschaft mbH, Berlin, Germany (2010), S. 590-597
K.A. Weidenmann; E. Kerscher; M. Merzkirch:
In Situ Damage Detection With Acoustic Emission Analysis During Cyclic Loading of Wire Reinforced EN AW-6082, Advanced Engineering Materials, 12 [7] (2010), S. 637-640
T. Kannengießer, A. Kromm, J. Gibmeier, M. Rethmeier:
In-situ-Analyse der Phasenumwandlungskinetik während des Schweißens
MP Materials Testing 52 (2010) 4, S. 204 – 210
M. Schwenk, J. Hoffmeister, C. Krause, V. Schulze:
Experimental and numerical investigation of surface induction hardening within the framework of process chain simulation
Heat Processing (8) Issue 4 (2010) S. 1 - 5
Damage evolution and domain-level anisotropy in metal/ceramic composites exhibiting lamellar microstructures.
Acta Materialia 58 (2010) 2300–2312
N. Eswara Prasad, D. Vogt, T. Bidlingmaier, A. Wanner, E. Arzt
Low cycle fatigue and creep–fatigue interaction in short fibre reinforced aluminium alloy composite.
Materials Science and Technology 26, 1363-1372 (2010)
R. Piat, T. Bohlke, O. Deutschmann, S. Dietrich, B. Drach, J.-M. Gebert, T. Gross, A. Li, B. Reznik, G. Stasiuk, I. Tsukrov, A.Wanner
Numerical Studies of the Influence of the Porosity on Macroscopic Elastic Properties of Carbon/Carbon Composites.
Proc. Appl. Math. Mech. 10, 719–720 (2010)
A. Kromm, T. Kannengiesser, J. Gibmeier:
In-situ observation of phase transformations during welding of low transforamtion temperature filler material
Materials Science Forum Vol. 638-642 (2010) S. 3769 - 3774
