- Thermodynamic assessment of the Cr-Ti and first assessment of the Al-Cr-Ti systems.
Cupid, D.M.; Kriegel, M.J.; Fabrichnaya, O.; Ebrahimi, F.; Seifert, H.J., Intermetallics, 19 (2011) S. 1222-1235
- Effect of different laser intensity profiles on laser brazed ceramic-steel joints.
Südmeyer, I.; Rohde, M.; Besser, H, Proceedings of SPIE (2011) San Fransisco, USA
- Thermodynamic assessment of the Al-Mo system and of the Ti-Al-Mo system from 0 to 20 at.% Ti.
Cupid, D.M.; Fabrichnaya, F.; Ebrahimi, F.; Seifert, H.J., Intermetallics, 18 (2010) S. 1185-1196
- Interlaboratory test on thermophysical properties on ITER grade heat sink material CuCrZn.
Pintsuk, G.; Blumm, J.; Rohde, M., et al., Int. J. Thermophysics, 31 (2010) 2147-2158
- Laser micro-welding of aluminium alloys: Experimental and numerical modelling.
Rohde, M.; Markert, C.; Pfleging, W., Int. J. Adv. Manuf. Technol., 50 (2010) 207-215
- On the shear strength of laser brazed SiC-steel joints: Effects of braze metal fillers and surface patterning.
Südmeyer, I.; Hettesheimer, T.; Rohde, M., Ceramics International, 36 (2010) 1083-1090
-
Thermodynamic re-assessment of the Ti-Al-Nb system.
Cupid, D.M.; Fabrichnaya, O.; Rios, O.; Ebrahimi, F.; Seifert, H.J., Int. J. Mater. Res., 100 (2009) S. 218-233
-
Thermal conductivity of sintered Lithium orthosilicate compacts.
Löbbecke, B.; Knitter, R.; Rohde, M.; Reimann, J., J. Nucl. Mat., 386-388 (2009) 1068-1070
- Joining of alumina and steel by a laser supported brazing process.
Rohde, M.; Südmeyer, I.; Urbanek, A.; Torge, M., Ceramics International, 35(2009) S. 333-37
- Preparation and characterization of ceramics laser alloyed with WO3 and CuO nanopowders.
Schreck, S.; Rohde, M., Microelectronics Journal, 40 (2009) S. 681-686
- Modelling of laser surface alloying and dispersing of ceramics.
Rohde, M.; Dimitrowa, D., Laser and Photonics Reviews, 2 (2008) 290-298
-
Thermodynamic calculations and phase stabilities in the Y-Si-C-O system.
Cupid, D.M.; Seifert, H.J., J. Phase Equilib., 28 (2007) S. 90-100
-
Thermodynamic aspects of liquid phase sintering of SiC using Al2O3 and Y2O3.
Cupid, D.M.; Fabrichnaya, O.; Seifert, H.J., Int. J. Mater. Res., 98 (2007) S. 976-986
-
Thermophysical properties of ceramic substrates with modified surfaces.
Rohde, M., Int. J. Thermophysics, 28 (2007) 1621-1627
-
Intercomparison of thermophysical measurements on austenitic steel.
Rudtsch, S.; Ebert, H.-P.; Rohde, M. et al., Int. J. Thermophysics, 26 (2005) 856-867
-
Expansion of solidified lead bismuth eutectic.
Glasbrenner, H.; Gröschel, F.; Grimmer, H.; Patorski, J.; Rohde, M., J. Nucl. Mat., 342 (2005) 341-348
-
Writing conducting lines into alumina ceramics by a laser dispersing process.
Baldus, O.; Schreck S., Rohde M., J. Europ. Ceram Soc., 24 (2004) 3759-3767
-
Experimental and numerical investigations of heat and mass transport in laser induced modification of ceramic surfaces.
Duitsch, U.; Schreck, S.; Rohde, M., Int. J. Thermophysics, 24 (2003) 1 - 4
-
Reduction of thermal conductivity in thin films and microstructures.
Rohde, M., Journal of Wide Bandgap Materials, 7 (2000) 283 – 293
