Publikationen von IAM-KWT

Fabrication of porous YSZ/NiO anodes for solid oxide fuel cells by freeze-tape-casting
Assis da Rocha, B.; Silva Rocha, A. M. da; Furlan, K. P.; Gómez González, S. Y.; Hotza, D.
2026. Journal of the European Ceramic Society, 46 (5), Art.-Nr. 117997. doi:10.1016/j.jeurceramsoc.2025.117997

Characterization of high-temperature compressive behaviour of field-assisted sintered niobium-alumina refractory composites
Günay, G.; Kallien, G.; Kraft, B.; Wagner, S.; Schell, K. G.; Heilmaier, M.; Biermann, H.; Weidner, A.
2026. Ceramics International, 52 (13), 21484–21496. doi:10.1016/j.ceramint.2026.03.228

Untersuchung elektromechanischer Mechanismen in ferroelektrischen Bariumtitanat-Keramiken. Dissertation
Lemos da Silva, L.
2026, April 21. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000192436

Benchmarking convective heat transfer in laminar pipe flow
Epp, F.; Reder, M.; Prajapati, N.; Nestler, B.
2026

Interphase-engineering by atomic layer deposition of nacre-inspired alumina composites
Nisar, T.; James, N. T.; Maragno, L. G.; Chevallier, E.; Gomes, D. R.; Okotete, E.; Lee, S.; Kirchlechner, C.; Furlan, K. P.
2026. Composites Communications, 62, 102697. doi:10.1016/j.coco.2025.102697

Obituary for Dr-Ing. Theo Fett (1943–2026)
Hoffmann, M. J.
2026. Journal of the European Ceramic Society, 46 (11), Artikel Nr. 118320. doi:10.1016/j.jeurceramsoc.2026.118320

Metal oxide heterostructures as multifunctional electrode materials for battery-type supercapacitors and oxygen evolution reactions
Ashfaq, U.; Hussain, M. N.; Naveed, A.; Tariq, I.; Mansoor, M. A.; Yaşar, S.; Nisar, T.; Wagner, V.; Badshah, A.; Haider, A.
2026. Nanoscale Advances, 8, 2985–2995. doi:10.1039/D5NA01181G

High-resolution analysis of ordered and disordered isoporous 3D nanostructures using PXCT
Hindenlang, B.; Jimenez, A. E.; Krekeler, T.; Ritter, M.; Diaz, A.; Holler, M.; Häntsch, Y.; Furlan, K. P.; Zeller-Plumhoff, B.
2026. Discover Nano, 21 (1), 46. doi:10.1186/s11671-026-04435-7

Fabrication of iron-based multiporous structures by combining in-situ reduction with sintering
Deschamps, I.; Schaefer, D. A.; Mocellin, I. C. M.; Sergeev, D.; Bouzbib, M.; Klein, A. N.; Bendo, T.; Furlan, K. P.
2026. Journal of Materials Research and Technology, 4844–4853. doi:10.1016/j.jmrt.2026.01.223

Sinter-based perovskites for energy-related applications
Hedrich, C.; Besegatto, S. V.; González, S. Y. G.; Furlan, K. P.
2026. Journal of the European Ceramic Society, 46 (1), 117741. doi:10.1016/j.jeurceramsoc.2025.117741

Facile Sol–Gel Synthesis of Graphene-Supported FeNi Nanocatalysts for Enhanced Oxygen Evolution Reaction
Doumbi, R. T.; Neto, J. M. D.; Morais, A. de; Freitas, A. M. D.; Bohn, F.; Furlan, K. P.; Hotza, D.; Martínez-Huitle, C. A.; Correa, M. A.
2025. ACS Omega, 10 (42), 50431–50444. doi:10.1021/acsomega.5c07875

Photovoltaic properties of BiI 3 with copper interstitials
Datta, R.; Herfert, K. T.; Többens, D. M.; Tischler, P.; Peterlechner, M.; Breitung, B.; Habrik, M.; Bruder, J.; Lemmer, U.; Schorr, S.; Colsmann, A.; Röhm, H.
2025. EES Solar, 1 (5), 881–886. doi:10.1039/D5EL00108K

How surface treatment of porous copper samples dictates dry friction and wear
Lung, R.; Schell, K. G.; Greiner, C.
2025. Materials & Design, 258, 114584. doi:10.1016/j.matdes.2025.114584

Optimizing NMP-Slurry Gelation in High-Solid Content Systems for NMC622 Electrodes: Advances in Roll-to-Roll Processes and Electrochemical Efficiency. Dissertation
Colombo, F.
2025, September 10. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000184615

Bleifreie Bariumtitanat-basierte PTC-Keramiken: Herstellung, Charakterisierung und mikrostrukturelle Optimierung. Dissertation
Subotić, S.
2025, September 3. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000184418

Lanthanide and Actinide‐Centered Polyoxo‐Noble‐Metalate‐Based Metal−Organic Frameworks
Bhattacharya, S.; Sarkar, A.; Zewdie, T. A.; George, A. J.; Dawoud, S.; Nisar, T.; Schürmann, C. J.; Wagner, V.; Ruhlmann, L.; Kortz, U.
2025. Chemistry – An Asian Journal, 20 (18), e00737. doi:10.1002/asia.202500737

Application of Oxidation Protective Coatings on Diboride Based Ultra-High Temperature Ceramics: Fundamental Studies on the Oxidation Behavior. Dissertation
Förster, J. E.
2025, August 26. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000184192

Facile Spin-Coated MoS 2 Thin Films from a Single-Source Precursor for HER Activity
Nisar, T.; Asghar, M. A.; Siddique, A. N.; Haider, A.; Pagnan Furlan, K.; Wagner, V.
2025. ACS Applied Energy Materials, 8 (13), 9497–9505. doi:10.1021/acsaem.5c00619

A comparative study of structural, mechanical, and thermal shock properties in ZrB-BC-SiC-LaB functionally graded and non-graded composites
Naik, A. K.; Kallien, G.; Schell, G.; Patel, M.; Laha, T.; Roy, S.
2025. Journal of Alloys and Compounds, 1036, 182159. doi:10.1016/j.jallcom.2025.182159

Herstellung und Charakterisierung von glaslotbasierten Fügungen von Metall-Keramik-Schicht-Verbunden für SOFC-Anwendungen. Dissertation
Walter, T. M.
2025, Mai 15. Karlsruher Institut für Technologie (KIT)

Influence of swelling stresses on the shift of Raman vibration peaks
Schell, K. G.; Bucharsky, C.; Wagner, S.; Fett, T.
2025. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000181119

Enhanced Coupling Between Soft Ferromagnetism and Displacive Ferroelectricity in the Pb‐Site Modified PbFeNbO
Park, J.-H.; Cho, J.-H.; Lee, N. J.; Lee, H.-J.; Lee, J.-H.; Lee, G.-J.; Marlton, F. P.; Suzuki, M.; Hinterstein, M.; Oh, Y. S.; Choi, J.-W.; Hwang, G.-T.; Lee, J. H.; Kim, S.; Kim, K. H.; Jo, W.
2025. Advanced Electronic Materials, 11 (2), Art.-Nr.: 2400370. doi:10.1002/aelm.202400370

Towards a fully differentiable digital twin for solar cells
Schubert, M. L.; Metni, H.; Fischbach, J. D.; Zerulla, B.; Krstić, M.; Paetzold, U. W.; Orooji, S.; Ronsin, O. J. J.; Ameslon, Y.; Harting, J.; Kirchartz, T.; Ravishankar, S.; Dreessen, C.; Kim, E.; Sprau, C.; Hussein, M.; Colsmann, A.; Forberich, K.; Jäger, K.; Friederich, P.; Rockstuhl, C.
2025. arxiv. doi:10.48550/arXiv.2512.02904

Impact of surface treatments on the photocatalytic performance of anodic aluminum oxide templates
Hedrich, C.; Petit, R. R.; Minjauw, M. M.; Burson, A. R.; Haugg, S.; Furlan, K. P.; Detavernier, C.; Dendooven, J.; Blick, R. H.; Zierold, R.
2025. Scientific Reports, 15 (1), 15030. doi:10.1038/s41598-025-98635-3

Bleifreie, oxidische Perowskite für die Photovoltaik. Dissertation
Braun, M.
2025. KIT Scientific Publishing. doi:10.5445/KSP/1000178040

A review on additive manufacturing of piezoelectric ceramics: From feedstock development to properties of sintered parts
Bhandari, S.; Vajpayee, G.; da Silva, L. L.; Hinterstein, M.; Franchin, G.; Colombo, P.
2025. Materials Science and Engineering: R: Reports, 162, Art.-Nr.: 100877. doi:10.1016/j.mser.2024.100877

Interpretation of decreasing peak-shift for Raman-peaks in silica
Schell, K. G.; Bucharsky, C.; Wagner, S.; Fett, T.
2024. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000177467

Stress-dependent vibration peaks in glass - Literature results
Schell, K. G.; Bucharsky, C.; Wagner, S.; Fett, T.
2024. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000176085

Optimierung des phenolharzbasierten LSI-Verfahrens zur Herstellung von SiC/SiC-Werkstoffen für Turbinenanwendungen. Dissertation
Süß, F.
2024, Oktober 25. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000175556

Lebensdaueranalyse von Tonerdeporzellan-Langstabisolatoren. Dissertation
Hettich, P.
2024, Oktober 16. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000174692

A contribution to stress-dependent vibration peaks : - Asymmetric stretching mode - Uniaxial loading
Schell, K. G.; Bucharsky, C.; Wagner, S.; Fett, T.
2024. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000174374

Bleifreie, oxidische Perowskite für die Photovoltaik. Dissertation
Braun, M.
2024, Juli 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000172075

Herstellung und Charakterisierung von Nb- und Ta-Al₂O₃-Verbundwerkstoffen für Hochtemperaturanwendungen. Dissertation
Kraft, B.
2024, Juli 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000172080

Transporteigenschaften hierarchisch strukturierter Elektroden für Lithium- und Natrium-Ionen-Batterien. Dissertation
Schneider, L.
2024, Juni 24. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000171736

Dry Manufacturing of Lithium-ion Battery Cathodes by Direct Powder Compaction in a Two-roll Calender. Dissertation
Gyulai, A.
2024, Mai 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000170189

Two‐Photon Polymerization of Nanocomposites for Additive Manufacturing of Transparent Magnesium Aluminate Spinel Ceramics
Prediger, R.; Sriyotha, N.; Schell, K. G.; Kluck, S.; Hambitzer, L.; Kotz-Helmer, F.
2024. Advanced Science, 11 (20), Art.-Nr.: 2307175. doi:10.1002/advs.202307175

Tests on silica for specimens without pre-existing stresses
Schell, G.; Bucharsky, C.; Fett, T.; Rizzi, G.; Wagner, S.
2024. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000169720

Multiscale Investigation of Sodium‐Ion Battery Anodes: Analytical Techniques and Applications
Schäfer, D.; Hankins, K.; Allion, M.; Krewer, U.; Karcher, F.; Derr, L.; Schuster, R.; Maibach, J.; Mück, S.; Kramer, D.; Mönig, R.; Jeschull, F.; Daboss, S.; Philipp, T.; Neusser, G.; Romer, J.; Palanisamy, K.; Kranz, C.; Buchner, F.; Behm, R. J.; Ahmadian, A.; Kübel, C.; Mohammad, I.; Samoson, A.; Witter, R.; Smarsly, B.; Rohnke, M.
2024. Advanced Energy Materials, 14 (15), Art.-Nr.: 2302830. doi:10.1002/aenm.202302830

High-resolution structuring of transparent spinel ceramics
Prediger, R.; Mader, M.; Schell, K. G.; Kluck, S.; Hambitzer, L.; Luitz, M.; Rapp, B. E.; Kotz-Helmer, F.
2024. B. L. Gray, B. E. Rapp & C. Dalton (Hrsg.), Microfluidics, BioMEMS, and Medical Microsystems XXII. Ed.: B.L. Gray, 14, SPIE. doi:10.1117/12.3002243

Conductivity and Electrochemistry of Hierarchically Structured Layered Oxides and Electrodes for Na-Ion Batteries. Dissertation
Schmidt, M.
2024, Februar 28. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000168461

Lichtabsorption und photovoltaischer Effekt in ferroelektrischem Bismutferrit. Dissertation
Petrick, S.
2024, Februar 1. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167924

ANDeS: An automated nanoliter droplet selection and collection device
Urrutia Gómez, J. E.; Faraj, R. E. K. E.; Braun, M.; Levkin, P. A.; Popova, A. A.
2024. SLAS Technology, 29 (1), Art.-Nr.: 100118. doi:10.1016/j.slast.2023.11.002

Einfluss verschiedener Herstellungsparameter auf mikrostrukturelle und elektrische Eigenschaften von BT-BNT. Dissertation
Lippmann, D.
2024, Januar 30. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000165903

Herstellung und Charakterisierung von Nb- und Ta-Al₂O₃-Verbundwerkstoffen für Hochtemperaturanwendungen. Dissertation
Kraft, B.
2024. doi:10.5445/KSP/1000172951

Disulfide‐Bridged Dynamic Covalent Triazine Polymer Thin Films by Interface Polymerization: High Refractive Index with Excellent Optical Transparency
Begum, S.; Kutonova, K.; Mauri, A.; Koenig, M.; Chan, K. C.; Sprau, C.; Dolle, C.; Trouillet, V.; Hassan, Z.; Leonhard, T.; Heißler, S.; Eggeler, Y. M.; Wenzel, W.; Kozlowska, M.; Bräse, S.
2024. Advanced Functional Materials, 34 (20), Art.-Nr.: 2303929. doi:10.1002/adfm.202303929

A reason for the occurrence of mass-transfer coefficients at silica surfaces
Schell, G.; Bucharsky, C.; Wagner, S.; Fett, T.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000165730

Kornwachstum von Strontiumtitanat sowie Titandioxid im elektrischen Feld. Dissertation
Preusker, J.
2023, Dezember 1. Karlsruher Institut für Technologie (KIT)

Steel ceramic composite anodes based on recycled MgO–C lining bricks for applications in cryolite/aluminum melts
Yaroshevskyi, S.; Weigelt С.; Malczyk, P.; Roungos, V.; Hubalkova, J.; Zienert, T.; Kraft, B.; Wagner, S.; Aneziris, C. G.
2023. Open Ceramics, 16, Art.Nr.: 100458. doi:10.1016/j.oceram.2023.100458

Untersuchung und Strukturierung des keramischen Kompositsystems Bariumstrontiumtitanat und Magnesiumborat. Dissertation
Häuser, K.
2023, November 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000164194/v2

Oxidische Keramiken als Elektrolyte für Festkörperbatterien. Dissertation
Schiffmann, N.
2023, September 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000161892

Impact of AC and DC Electric Fields on the Microstructure Evolution in Strontium Titanate
Preusker, J.-H.; Hoffmann, M. J.; Rheinheimer, W.
2023. Advanced Engineering Materials, 25 (18). doi:10.1002/adem.202201848

Mass-transfer coefficient for water at silica surfaces: Effect of surface dissolution?
Schell, G.; Bucharsky, C.; Fett, T.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000161875

In situ neutron diffraction for analysing complex coarse-grained functional materials
Hinterstein, M.; Lemos da Silva, L.; Knapp, M.; Schoekel, A.; Etter, M.; Studer, A.; Brand, H.
2023. Journal of Applied Crystallography, 56 (4), 1242 – 1251. doi:10.1107/S1600576723005940

Perovskite/metal (BiNaTiO-BaTiO/Ag) lead-free composite ceramics featuring enhanced depolarization temperature
Luo, H.; Tang, S.; Sun, Z.; Zhang, Y.; Yao, Y.; Zheng, H.; Yang, J.; Ren, Y.; Tang, M.; Huang, H.; Liu, H.; Hinterstein, M.; Chen, J.
2023. Acta Materialia, 254, Art.-Nr.: 119024. doi:10.1016/j.actamat.2023.119024

Dilute iron‐doped polycrystalline strontium titanate: Tracking iron valence and local interactions
Knight, M.; Reimanis, I.; Meyer, A.; Preusker, J.-H.; Rheinheimer, W.
2023. Journal of the American Ceramic Society, 106 (8), 4740–4751. doi:10.1111/jace.19111

Microstructure – Mechanical Property Relationship in Pristine and Aged Forsterite as a New Support Material for Solid Oxide Fuel Cells
Grudenik, M.; Kaya, P.; Meffert, M.; Gerthsen, D.; Lupetin, P.; Hoffmann, M. J.; Knoblauch, V.
2023. Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada, 29 (Supplement_1), 1452 – 1453. doi:10.1093/micmic/ozad067.746

Festigkeits- und bruchmechanische Untersuchungen einer hochtemperaturbelasteten Forsterit-Keramik für die Anwendung in Festoxidbrennstoffzellen (SOFC). Dissertation
Grudenik, M.
2023, Juli 3. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000160033

Electric field-induced two-step phase transformation and its contribution to the electromechanical strain in lead-free relaxor-based ceramics
Yang, H.; Zhao, J.; Zhuang, J.; Hinterstein, M.; Ren, W.; Ye, Z.-G.; Zhang, N.
2023. Journal of the European Ceramic Society, 43 (8), 3289–3296. doi:10.1016/j.jeurceramsoc.2023.02.027

Entwicklung keramischer Vergussmassen mit Alkoxysilanen zur Steigerung der Haftfestigkeit. Dissertation
Kohler, T.
2023, Juni 6. KIT Scientific Publishing. doi:10.5445/KSP/1000156532

Texture-based ferroelectric hardening in -based piezoceramics
Bremecker, D.; Wohninsland, A.; Teuber, S.; Lalitha, K. V.; Hinterstein, M.; Rödel, J.
2023. Physical Review Materials, 7 (6), Art.Nr.: 064407. doi:10.1103/PhysRevMaterials.7.064407

Green batteries for clean skies: Sustainability assessment of lithium‐sulfur all‐solid‐state batteries for electric aircraft
Barke, A.; Cistjakov, W.; Steckermeier, D.; Thies, C.; Popien, J.-L.; Michalowski, P.; Pinheiro Melo, S.; Cerdas, F.; Herrmann, C.; Krewer, U.; Kwade, A.; Spengler, T. S.
2023. Journal of Industrial Ecology, 27 (3), 795–810. doi:10.1111/jiec.13345

Investigation of the electrochemical electrolyte decomposition in lithium-ion pouch cells by liquid chromatography and gas chromatography. Dissertation
Stockhausen, J. R.
2023, Mai 25. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000158906

Structural insights into electric field induced polarization and strain responses in K Na Nb O modified morphotropic phase boundary compositions of Na Bi Ti O -based lead-free piezoelectrics
Das Adhikary, G.; Jafo Muleta, G.; Abebe Tina, G.; Sharma, D.; Mahale, B.; Silva, L. L. da; Hinterstein, M.; Senyshyn, A.; Ranjan, R.
2023. Physical Review B, 107 (13), Art.-Nr.: 134108. doi:10.1103/PhysRevB.107.134108

Interpretation of irregular water profiles at silica surfaces
Bucharsky, C.; Schell, G.; Fett, T.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000157958

Grain growth and segregation in Fe-doped SrTiO: Experimental evidence for solute drag
Zahler, M. P.; Kraschewski, S. M.; Störmer, H.; Gerthsen, D.; Bäurer, M.; Rheinheimer, W.
2023. Journal of the European Ceramic Society, 43 (4), 1613–1624. doi:10.1016/j.jeurceramsoc.2022.11.074

Defect redistribution along grain boundaries in SrTiO by externally applied electric fields
Qu, B.; Eiteneer, D.; Hughes, L. A.; Preusker, J.-H.; Wood, J.; Rheinheimer, W.; Hoffmann, M. J.; van Benthem, K.
2023. Journal of the European Ceramic Society, 43 (4), 1625–1632. doi:10.1016/j.jeurceramsoc.2022.11.028

Stroboscopic in situ neutron diffraction approach to elucidate the kinetics of strain mechanisms in ferroelectric materials
Hinterstein, M.; Lemos da Silva, L.; Vajpayee, G.; Lee, K.-Y.; Studer, A.
2023. Physical Review Materials, 7 (3), Art.-Nr.: 034406. doi:10.1103/PhysRevMaterials.7.034406

Evaluation of water profiles at silica surfaces at 23°C, 100°C and 200°C by Zouine et al
Schell, G.; Bucharsky, C.; Fett, T.
2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000156999

Model-based insights into the decarbonation dynamics of anion-exchange membranes
Kubannek, F.; Zhegur-Khais, A.; Li, S.; Dekel, D. R.; Krewer, U.
2023. Chemical Engineering Journal, 459, Art.-Nr.: 141534. doi:10.1016/j.cej.2023.141534

A 3D computational method for determination of pores per inch (PPI) of porous structures
Jamshidi, F.; Kunz, W.; Altschuh, P.; Lu, T.; Laqua, M.; August, A.; Löffler, F.; Selzer, M.; Nestler, B.
2023. Materials Today Communications, 34, Art.-Nr.: 105413. doi:10.1016/j.mtcomm.2023.105413

Field assisted sintering of Ta–AlO composite materials and investigation of electrical conductivity
Kraft, B.; Wagner, S.; Schell, K. G.; Hoffmann, M. J.
2023. Open Ceramics, 13, Art.-Nr.: 100319. doi:10.1016/j.oceram.2022.100319

Mikrostrukturelle Entwicklung in perowskitischen Systemen unter besonderer Berücksichtigung defektchemischer Einflüsse. Dissertation
Altermann, F. J.
2023, Februar 7. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000153926

Polyindole Embedded Nickel/Zinc Oxide Nanocomposites for High-Performance Energy Storage Applications
Humayun, H.; Begum, B.; Bilal, S.; Shah, A. ul H. A.; Röse, P.
2023. Nanomaterials, 13 (3), Art.-Nr.: 618. doi:10.3390/nano13030618

Entwicklung offenporöser und komplexer Strukturen aus Siliziumdioxid mit dem Replika-Verfahren und der Stereolithographie. Dissertation
Löffler, F. B.
2023, Januar 27. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000155175

Electromagnetic modeling of tunability of Barium Strontium Titanate and Magnesium Borate composites
Agrawal, P.; Matic, S.; Häuser, K.; Binder, J. R.; Maune, H.; Polat, E.; Jakoby, R.
2023. Ceramics International, 10 S. doi:10.1016/j.ceramint.2022.09.202

Oxide ceramic electrolytes for all-solid-state lithium batteries – cost-cutting cell design and environmental impact
Schreiber, A.; Rosen, M.; Waetzig, K.; Nikolowski, K.; Schiffmann, N.; Wiggers, H.; Küpers, M.; Fattakhova-Rohlfing, D.; Kuckshinrichs, W.; Guillon, O.; Finsterbusch, M.
2023. Green Chemistry, 25 (1), 399–414. doi:10.1039/d2gc03368b

Bestimmung der Diffusionskoeffizienten einer Batterieelektrode mittels modellgestützter GITT-Analyse. Masterarbeit
Vielsäcker, E.
2023. Karlsruher Institut für Technologie (KIT)

Impact of electrolyte impurities and SEI composition on battery safety
Baakes, F.; Witt, D.; Krewer, U.
2023. Chemical Science, 14 (47), 13783–13798. doi:10.1039/d3sc04186g

Entwicklung und Charakterisierung von Siliziumnitrid-/Siliziumkarbidkompositen für den Einsatz in tribologisch hochbeanspruchten Gleitsystemen. Dissertation
Zielonka, P. S.
2023. doi:10.5445/KSP/1000153717

Mass transfer coefficient for silica in liquid water at 200°C
Schell, G.; Fett, T.; Bucharsky, C.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000153328

Grain Boundary Grooving by Surface Diffusion in Nickel Bicrystals
Haremski, P.; Epple, L.; Wieler, M.; Lupetin, P.; Klinger, L.; Rabkin, E.; Hoffmann, M. J.
2022. Acta Materialia, 241, Art.Nr. 118334. doi:10.1016/j.actamat.2022.118334

Deciphering the phase transition-induced ultrahigh piezoresponse in (K,Na)NbO-based piezoceramics
Zhang, M.-H.; Shen, C.; Zhao, C.; Dai, M.; Yao, F.-Z.; Wu, B.; Ma, J.; Nan, H.; Wang, D.; Yuan, Q.; da Silva, L. L.; Fulanović, L.; Schökel, A.; Liu, P.; Zhang, H.; Li, J.-F.; Zhang, N.; Wang, K.; Rödel, J.; Hinterstein, M.
2022. Nature Communications, 13 (1), Art.Nr. 3434. doi:10.1038/s41467-022-31158-x

Injection Molding of Magnesium Aluminate Spinel Nanocomposites for High‐Throughput Manufacturing of Transparent Ceramics
Mader, M.; Prediger, R.; Schell, K. G.; Schmidt, G.; Dorn, A.; Dorn, A.; Jenne, S.; Kluck, S.; Hambitzer, L.; Luitz, M.; Luitz, M.; Schwarz, C.; Milich, M.; Greiner, C.
2022. Advanced Science, 9 (31), Art.Nr. 2204385. doi:10.1002/advs.202204385

Microkinetic Barriers of the Oxygen Evolution on the Oxides of Iridium, Ruthenium and their Binary Mixtures
Geppert, J.; Röse, P.; Pauer, S.; Krewer, U.
2022. ChemElectroChem, 9 (20), Art.Nr. e202200481. doi:10.1002/celc.202200481

Heating up the OER: Investigation of IrO₂ OER Catalysts as Function of Potential and Temperature
Czioska, S.; Ehelebe, K.; Geppert, J.; Escalera-López, D.; Boubnov, A.; Saraçi, E.; Mayerhöfer, B.; Krewer, U.; Cherevko, S.; Grunwaldt, J.-D.
2022. ChemElectroChem, 9 (19), e202200514. doi:10.1002/celc.202200514

Surface Properties of Graphite for Efficient Electrocatalysis of Vanadium Redox Reactions. Dissertation
Radinger, H.
2022, Oktober 4. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000150874

Sol–gel encapsulation for power electronics utilizing 3-Glycidyloxypropyltriethoxysilane and 3-Mercaptopropyltrimethoxysilane
Kohler, T.; Hejtmann, G.; Henneck, S.; Schubert, M.; Guyenot, M.
2022. Journal of Sol-Gel Science and Technology, 103 (3), 832–842. doi:10.1007/s10971-022-05894-x

Ultrasonic study of the elastic properties of functionally graded and equivalent monolithic composites
Nazeer, M.; Jana, P.; Oza, M. J.; Schell, K. G.; Bucharsky, E. C.; Laha, T.; Roy, S.
2022. Materials Letters, 323, Art.-Nr.: 132594. doi:10.1016/j.matlet.2022.132594

Quality control of mass-produced GEM detectors for the CMS GE1/1 muon upgrade
Abbas, M.; Abbrescia, M.; Abdalla, H.; Abdelalim, A.; AbuZeid, S.; Agapitos, A.; Ahmad, A.; Ahmed, A.; Ahmed, W.; Aimè, C.; Aruta, C.; Asghar, I.; Aspell, P.; Avila, C.; Babbar, J.; Ban, Y.; Band, R.; Bansal, S.; Benussi, L.; Beyrouthy, T.; Bhatnagar, V.; Bianco, M.; Bianco, S.; Black, K.; Borgonovi, L.; Bouhali, O.; Braghieri, A.; Braibant, S.; Butalla, S. D.; Calzaferri, S.; Caponero, M.; Carlson, J.; Cassese, F.; Cavallo, N.; Chauhan, S. S.; Colafranceschi, S.; Colaleo, A.; Collins, J.; Garcia, A. C.; Dalchenko, M.; De Iorio, A.; De Lentdecker, G.; Olio, D. D.; De Robertis, G.; Dharmaratna, W.; Dildick, S.; Dorney, B.; Erbacher, R.; Fabozzi, F.; Fallavollita, F.; Ferraro, A.; Fiorina, D.; Fontanesi, E.; Franco, M.; Galloni, C.; Giacomelli, P.; Gigli, S.; Gilmore, J.; Gola, M.; Gruchala, M.; Gutierrez, A.; Hakkarainen, T.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Huang, T.; Iaydjiev, P.; Irshad, A.; Iorio, A.; Ivone, F.; Jang, W.; Jaramillo, J.; Juodagalvis, A.; Juska, E.; Kailasapathy, B.; Kamon, T.; Kang, Y.; Karchin, P.; Kaur, A.; Kaur, H.; Keller, H.; Kim, H.; Kim, J.; Kim, S.; Ko, B.; Kumar, A.; Kumar, S.; Lacalamita, N.; Lee, J. S. H.; Levin, A.; Li, Q.; Licciulli, F.; Lista, L.; Liyanage, K.; Loddo, F.; Luhach, M.; Maggi, M.; Maghrbi, Y.; Majumdar, N.; Malagalage, K.; Malhotra, S.; Martiradonna, S.; McLean, C.; Merlin, J.; Misheva, M.; Mocellin, G.; Moureaux, L.; Muhammad, A.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveira, R.; Paolucci, P.; Park, I. C.; Passamonti, L.; Passeggio, G.; Peck, A.; Pellecchia, A.; Perera, N.; Petre, L.; Petrow, H.; Piccolo, D.; Pierluigi, D.; Rahmani, M.; Ramirez, F.; Ranieri, A.; Rashevski, G.; Regnery, B.; Ressegotti, M.; Riccardi, C.; Rodozov, M.; Romano, E.; Roskas, C.; Rossi, B.; Rout, P.; Ruiz, J. D.; Russo, A.; Safonov, A.; Sahota, A. K.; Saltzberg, D.; Saviano, G.; Shah, A.; Sharma, A.; Sharma, R.; Sheokand, T.; Shopova, M.; Simone, F. M.; Singh, J.; Sonnadara, U.; Stamerra, A.; Starling, E.; Stone, B.; Sturdy, J.; Sultanov, G.; Szillasi, Z.; Teague, D.; Teyssier, D.; Tuuva, T.; Tytgat, M.; Vai, I.; Vanegas, N.; Venditti, R.; Verwilligen, P.; Vetens, W.; Virdi, A. K.; Vitulo, P.; Wajid, A.; Wang, D.; Wang, K.; Watson, I. J.; Wickramage, N.; Wickramarathna, D. D. C.; Yang, S.; Yang, U.; Yang, Y.; Yongho, J.; Yoon, I.; You, Z.; Yu, I.; Zaleski, S.
2022. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 1034, Art.-Nr.: 166716. doi:10.1016/j.nima.2022.166716

Mass Transfer of Water at Silica Surfaces - Extension of the data base to lower temperatures
Fett, T.; Schell, K. G.; Bucharsky, C.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000148030

Zeitabhängige Untersuchung der bleifreien Piezokeramik (1-x)BiNaTiO-xBaTiO mit in situ Röntgenbeugung. Dissertation
Lee, K.-Y.
2022, Mai 17. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000146274

Assessment of Core-Shell and Agglomerate Particle Design for All-Solid-State Batteries
Cistjakov, W.; Laue, V.; Röder, F.; Krewer, U.
2022. Journal of The Electrochemical Society, 169 (5), Art.-Nr.: 050510. doi:10.1149/1945-7111/ac67f8

Detection of hydrogen as impurity in liquid lithium: An electrochemical hydrogen-sensor for IFMIF-DONES
Holstein, N.; Krauss, W.; Nitti, F. S.
2022. Fusion Engineering and Design, 178, Art.Nr. 113085. doi:10.1016/j.fusengdes.2022.113085

Structure and relaxor ferroelectric behavior of the novel tungsten bronze type ceramic SrBiTiNbO
He, Q.; Schmid, S.; Chen, X.; Peng, B.; Li, C.; Hu, C.; Liu, L.; Hinterstein, M.
2022. Journal of Applied Physics, 131 (16), Art.-Nr.: 164102. doi:10.1063/5.0084417

Interface effects in solid electrolytes for Li-ion batteries. Dissertation
Luo, X.
2022, April 13. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000144708

Untersuchung von Nichtsilbermaterialien als Füllstoff für gesinterte Silberverbindungen für SiC-Leistungshalbleiteranwendungen. Dissertation
Stenzel, D. B.
2022, März 18. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000143579

Unveiling the interaction of reactions and phase transition during thermal abuse of Li-ion batteries
Baakes, F.; Lüthe, M.; Gerasimov, M.; Laue, V.; Röder, F.; Balbuena, P. B.; Krewer, U.
2022. Journal of Power Sources, 522, Art.-Nr.: 230881. doi:10.1016/j.jpowsour.2021.230881

Study of the elastic properties and thermal shock behavior of Al–SiC-graphite hybrid composites fabricated by spark plasma sintering
Jana, P.; Oza, M. J.; Schell, K. G.; Bucharsky, E. C.; Laha, T.; Roy, S.
2022. Ceramics International, 48 (4), 5386–5396. doi:10.1016/j.ceramint.2021.11.082

Crack-Tip Shielding by Swelling in Silica Proved from Measurement of Crack-Terminating Angles in DCDC-Tests
Hettich, P.; Schell, K. G.; Bucharsky, E. C.; Rizzi, G.; Wagner, S.; Fett, T.
2022. Glass Physics and Chemistry, 48, 30–34. doi:10.1134/S1087659622010060

Ferroelectricity and Crystal Phases in Mixed‐Cation Lead Iodide Perovskite Solar Cells
Schulz, A. D.; Schmitt, M. O.; Braun, M.; Colsmann, A.; Hinterstein, M.; Röhm, H.
2022. Solar RRL, 6 (12), Art.-Nr.: 2200808. doi:10.1002/solr.202200808

Mass transfer coefficients for water at silica surfaces evaluated on the basis of literature data
Fett, T.; Schell, G.; Bucharsky, C.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000151960

Interpretation of silica-disk-tests including the effect of limited mass transfer at the surface
Fett, T.; Schell, G.; Bucharsky, C.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000150433

Distribution of equilibrium constant k and hydroxyl S in silica surface layers
Fett, T.; Schell, G.; Bucharsky, C.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000149972

Identifying Anode and Cathode Contributions in Li-Ion Full-Cell Impedance Spectra
Heinrich, M.; Wolff, N.; Seitz, S.; Krewer, U.
2022. Batteries, 8 (5), Art.-Nr.: 40. doi:10.3390/batteries8050040

Coarse‐Grained Refractory Composite Castables Based on Alumina and Niobium
Zienert, T.; Endler, D.; Hubálková, J.; Gehre, P.; Eusterholz, M.; Boll, T.; Heilmaier, M.; Günay, G.; Weidner, A.; Biermann, H.; Kraft, B.; Wagner, S.; Aneziris, C. G.
2022. Advanced Engineering Materials, 24 (8), Art.-Nr.: 2200296. doi:10.1002/adem.202200296

Field‐Assisted Sintering of Nb–AlO Composite Materials and Investigation of Electrical Conductivity
Kraft, B.; Wagner, S.; Schell, K. G.; Hoffmann, M. J.
2022. Advanced Engineering Materials, 24 (8), Art.-Nr.: 2200063. doi:10.1002/adem.202200063

Analysis of Lithium‐Ion Battery State and Degradation via Physicochemical Cell and SEI Modeling
Witt, D.; Röder, F.; Krewer, U.
2022. Batteries and Supercaps, 5 (7), e202200067. doi:10.1002/batt.202200067

Validation of the swelling formalism via evaluation of bending moments from literature: Comparison of theoretical predictions and measurements
Schell, K. G.; Fett, T.; Bucharsky, C.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000146825

Model-Based Design of High Energy All-Solid-State Li Batteries with Hybrid Electrolytes
Toghyani, S.; Baakes, F.; Zhang, N.; Kühnelt, H.; Cistjakov, W.; Krewer, U.
2022. Journal of The Electrochemical Society, 169 (4), Art. Nr.: 040550. doi:10.1149/1945-7111/ac653b

Machine Learning Assisted Design of Experiments for Solid State Electrolyte Lithium Aluminum Titanium Phosphate
Zhao, Y.; Schiffmann, N.; Koeppe, A.; Brandt, N.; Bucharsky, E. C.; Schell, K. G.; Selzer, M.; Nestler, B.
2022. Frontiers in Materials, 9, Art.-Nr.: 821817. doi:10.3389/fmats.2022.821817

Digitalization Platform for Mechanistic Modeling of Battery Cell Production
Thomitzek, M.; Schmidt, O.; Ventura Silva, G.; Karaki, H.; Lippke, M.; Krewer, U.; Schröder, D.; Kwade, A.; Herrmann, C.
2022. Sustainability (Switzerland), 14 (3), Art.-Nr.: 1530. doi:10.3390/su14031530

A robust methanol concentration sensing technique in direct methanol fuel cells and stacks using cell dynamics
Na, Y.; Khadke, P.; Glüsen, A.; Kimiaie, N.; Müller, M.; Krewer, U.
2022. International Journal of Hydrogen Energy, 47 (9), 6237–6246. doi:10.1016/j.ijhydene.2021.11.249

Consequences of hydroxyl generation by the silica/water reaction - Part II: Global and local Swelling - Part III: Damage and Young’s Modulus
Fett, T.; Schell, K. G.; Bucharsky, E. C.; Rizzi, G.; Wagner, S.; Hoffmann, M. J.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000141423

Sn-Pb Mixed Perovskites with Fullerene-Derivative Interlayers for Efficient Four-Terminal All-Perovskite Tandem Solar Cells
Hu, H.; Moghadamzadeh, S.; Azmi, R.; Li, Y.; Kaiser, M.; Fischer, J. C.; Jin, Q.; Maibach, J.; Hossain, I. M.; Paetzold, U. W.; Abdollahi Nejand, B.
2022. Advanced Functional Materials, 32 (12), Art.-Nr.: 2107650. doi:10.1002/adfm.202107650

Revealing intrinsic and extrinsic piezoelectric contributions in phase coexistence system of PbTiO-BiScO [揭示相共存体系PbTiO-BiScO中内在和外在压电贡献]
Sun, S.; Liu, H.; Ren, Y.; Hinterstein, M.; Chen, J.
2022. Science China Materials, 65, 170–178. doi:10.1007/s40843-021-1736-3

Consequences of hydroxyl generation by the silica/water reaction - Part I: Diffusion and Swelling
Fett, T.; Schell, K. G.; Bucharsky, E. C.; Rizzi, G.; Hettich, P.; Wagner, S.; Hoffmann, M. J.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000136481

Herstellung dünner Folien aus Lithium-Lanthan-Titanat zur Anwendung als Festkörperelektrolyt. Dissertation
Schröckert, F.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000105152

Anomalous Subcritical Crack Growth in Silica
Fett, T.; Schell, K. G.; Bucharsky, E. C.; Hoffmann, M. J.
2021. Glass physics and chemistry, 47 (6), 581–589. doi:10.1134/S1087659621060092

Sintering behavior and electrical properties of the paraelectric/dielectric composite system BST/MBO
Häuser, K.; Azmi, R.; Agrawal, P.; Jakoby, R.; Maune, H.; Hoffmann, M. J.; Binder, J. R.
2021. Journal of the European Ceramic Society, 41 (14), 7022–7028. doi:10.1016/j.jeurceramsoc.2021.07.008

Entwicklung von Siebdruckpasten zur Herstellung von Glaslotfügungen für die Festoxidbrennstoffzelle. Dissertation
Dittrich, S.
2021, Oktober 28. KIT Scientific Publishing. doi:10.5445/KSP/1000134615

Synthesis of niobium-alumina composite aggregates and their application in coarse-grained refractory ceramic-metal castables
Zienert, T.; Endler, D.; Hubálková, J.; Günay, G.; Weidner, A.; Biermann, H.; Kraft, B.; Wagner, S.; Aneziris, C. G.
2021. Materials, 14 (21), Art.Nr. 6453. doi:10.3390/ma14216453

Evolution of ferroelectric domains in methylammonium lead iodide and correlation with the performance of perovskite solar cells
Leonhard, T.; Röhm, H.; Altermann, F. J.; Hoffmann, M. J.; Colsmann, A.
2021. Journal of materials chemistry / A, 9 (38), 21845–21858. doi:10.1039/d1ta06290e

Microstructure and precipitation behavior of advanced RAFM steels for high-temperature applications on fusion reactors
Fernández, P.; Hoffmann, J.; Rieth, M.; Gómez-Herrero, A.
2021. Materials Characterization, 180, Art.-Nr.: 111443. doi:10.1016/j.matchar.2021.111443

Crack-tip models by Irwin and Dugdale for hydroxyl-damaged crack-tip zones
Fett, T.; Schell, K. G.; Bucharsky, C.
2021. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000137859

Increased Ir–Ir Interaction in Iridium Oxide during the Oxygen Evolution Reaction at High Potentials Probed by Operando Spectroscopy
Czioska, S.; Boubnov, A.; Escalera-López, D.; Geppert, J.; Zagalskaya, A.; Röse, P.; Saraçi, E.; Alexandrov, V.; Krewer, U.; Cherevko, S.; Grunwaldt, J.-D.
2021. ACS catalysis, 11 (15), 10043–10057. doi:10.1021/acscatal.1c02074

A thermal grooving study of relative grain boundary energies of nickel in polycrystalline Ni and in a Ni/YSZ anode measured by atomic force microscopy
Haremski, P.; Epple, L.; Wieler, M.; Lupetin, P.; Thelen, R.; Hoffmann, M. J.
2021. Acta materialia, 214, Art. Nr.: 116936. doi:10.1016/j.actamat.2021.116936

Relaxation of stresses in glass surface regions by subcritical crack growth
Fett, T.; Schell, K. G.; Bucharsky, C.; Rizzi, G.
2021. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000135923

Verbesserung des Eigenschaftsspektrums maßgeschneiderter SMC-Werkstoffe. Dissertation
Schuller, D.
2021, Juni 24. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000134054

Correction to: Upscaling of LATP synthesis: Stoichiometric screening of phase purity and microstructure to ionic conductivity maps
Schiffmann, N.; Bucharsky, E. C.; Schell, K. G.; Fritsch, C. A.; Knapp, M.; Hoffmann, M. J.
2021. Ionics, 27 (6), 2747. doi:10.1007/s11581-021-04005-0

Revealing the degree and impact of inhomogeneous electrolyte distributions on silver based gas diffusion electrodes
Röhe, M.; Franzen, D.; Kubannek, F.; Ellendorff, B.; Turek, T.; Krewer, U.
2021. Electrochimica Acta, 389, Art.-Nr.: 138693. doi:10.1016/j.electacta.2021.138693

Identifying the oxygen evolution mechanism by microkinetic modelling of cyclic voltammograms
Geppert, J.; Kubannek, F.; Röse, P.; Krewer, U.
2021. Electrochimica Acta, 380, Art.-Nr.: 137902. doi:10.1016/j.electacta.2021.137902

Design, Manufacturing, and Numerical Simulation of a Tube-in-Tube High-Temperature Heat Exchanger with Microstructures to Enhance Heat Transfer
Hurtado Rivera, A. C.; Löffler, F. B.; Burchasky, E. C.; Schell, K. G.; Thompson, E. S.; Nestle, N.; Schreyer, H.; Korvink, J. G.; Brandner, J. J.
2021. Chemical engineering transactions, 86, 1195–1200. doi:10.3303/CET2186200

Understanding the solid electrolyte Li6PS5CL and its reaction to contact with lithium metal under cyclic load. Dissertation
Schlenker, R.
2021, April 20. Karlsruher Institut für Technologie (KIT)

Identifying the oxygen evolution mechanism by microkinetic modelling of cyclic voltammograms
Geppert, J.; Kubannek, F.; Röse, P.; Krewer, U.
2021, April. 29th Topical Meeting of the International Society of Electrochemistry (2021), Online, 18.–21. April 2021

Development of Ultra High Temperature Matrix Composites using a Reactive Melt Infiltration Process. Dissertation
Kütemeyer, M.
2021, März 23. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000130618

Revealing the complex sulfur reduction mechanism using cyclic voltammetry simulation
Schön, P.; Krewer, U.
2021. Electrochimica Acta, 373, Art.-Nr.: 137523. doi:10.1016/j.electacta.2020.137523

Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties
Oza, M. J.; Schell, K. G.; Bucharsky, E. C.; Laha, T.; Roy, S.
2021. Materials science and engineering / A, 805, Art. Nr.: 140625. doi:10.1016/j.msea.2020.140625

Processing and properties of translucent bismuth sodium titanate ceramics
Seifert, D. U.; Li, L.; Lee, K.-Y.; Hoffmann, M. J.; Sinclair, D. C.; Hinterstein, M.
2021. Journal of the European Ceramic Society, 41 (2), 1221–1229. doi:10.1016/j.jeurceramsoc.2020.10.009

Diffusionseigenschaften von Nickel in einer Festoxid-Brennstoffzelle. Dissertation
Haremski, P.
2021, Januar 7. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000127826

Uncovering the symmetry of the induced ferroelectric phase transformation in polycrystalline barium titanate
Lemos Da Silva, L.; Lee, K.-Y.; Petrick, S.; Etter, M.; Schökel, A.; Chaves, C. G.; Oliveira Da Silva, N.; Lalitha, K. V.; Picht, G.; Hoffmann, M. J.; Hinterstein, M.
2021. Journal of Applied Physics, 130 (23), Art.-Nr. 234101. doi:10.1063/5.0068703

Effect of varying Bi content on the temperature-dependent mechanical, dielectric, and structural properties of nominal NaBiTiO
Gadelmawla, A.; Riess, K.; Birkenstock, J.; Hinterstein, M.; Webber, K. G.; Khansur, N. H.
2021. Journal of Applied Physics, 130 (18), Art.Nr. 185106. doi:10.1063/5.0070594

Diffusionseigenschaften von Nickel in einer Festoxid-Brennstoffzelle. Dissertation
Haremski, P.
2021. KIT Scientific Publishing. doi:10.5445/KSP/1000136273

Averaged stress intensity factors for semi-elliptical surface cracks
Schell, K. G.; Bucharsky, C.; Rizzi, G.; Fett, T.
2021. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000134323

Dielectric Relaxation and Magnetic Structure of A-Site-Ordered Perovskite Oxide Semiconductor CaCuFeTaO
Deng, J.; Han, F.; Schwarz, B.; Knapp, M.; Ehrenberg, H.; Hua, W.; Hinterstein, M.; Li, G.; He, Y.; Wang, J.; Yuan, Y.; Liu, L.
2021. Inorganic Chemistry, 60 (10), 6999–7007. doi:10.1021/acs.inorgchem.0c03229

Indentation events during surface machining - Compilation of local stress intensity factors
Fett, T.; Schell, K. G.; Bucharsky, C.
2021. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000132696

Upscaling of LATP synthesis: Stoichiometric screening of phase purity and microstructure to ionic conductivity maps
Schiffmann, N.; Bucharsky, E. C.; Schell, K. G.; Fritsch, C. A.; Knapp, M.; Hoffmann, M. J.
2021. Ionics, 27 (5), 2017–2025. doi:10.1007/s11581-021-03961-x

Mechanical investigation of glass ceramic brazed ceramic and steel composites
Walter, T. M.; Bucharsky, E. C.; Schell, K. G.; Hoffmann, M. J.
2021. International journal of applied glass science, 12 (1), 175–182. doi:10.1111/ijag.15822

Grain size effects in donor doped lead zirconate titanate ceramics
Picht, G.; Khansur, N. H.; Webber, K. G.; Kungl, H.; Hoffmann, M. J.; Hinterstein, M.
2020. Journal of applied physics, 128 (21), Art. Nr.: 214105. doi:10.1063/5.0029659

The mechanism of grain growth at general grain boundaries in SrTiO3
Sternlicht, H.; Rheinheimer, W.; Mehlmann, A.; Rothschild, A.; Hoffmann, M. J.; Kaplan, W. D.
2020. Scripta materialia, 188, 206–211. doi:10.1016/j.scriptamat.2020.07.015

Development of silica based organic slurries for stereolithographic printing process
Löffler, F. B.; Bucharsky, E. C.; Schell, K. G.; Heißler, S.; Hoffmann, M. J.
2020. Journal of the European Ceramic Society, 40 (13), 4556–4561. doi:10.1016/j.jeurceramsoc.2020.05.023

Molar volume of SiOH estimated from swelling strains
Fett, T.; Schell, K. G.; Wiederhorn, S. M.
2020. International journal of applied glass science, 11 (4), 608–611. doi:10.1111/ijag.13564

Damage by Hydroxyl Generation in Silica
Schell, K. G.; Fett, T.; Bucharsky, E. C.; Hoffmann, M. J.; Wiederhorn, S. M.
2020. Glass physics and chemistry, 46 (5), 424–428. doi:10.1134/S1087659620050077

Entwicklung von keramischen SiC/SiC-Verbundwerkstoffen mit Tyranno SA3 Fasern auf Basis des PIP- und LSI-Verfahrens. Dissertation
Mainzer, B.
2020, Mai 20. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000119437

Ru-/Ti-substituierter LNMO-Spinell als positives Elektrodenmaterial für Li-Ionen-Batterien – Degradationsprozesse und ergänzende Strukturaufklärung. Dissertation
Stoll, A. C.
2020, Mai 8. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000119070

The complex structural mechanisms behind strain curves in bismuth sodium titanate–barium titanate
Lee, K.-Y.; Shi, X.; Kumar, N.; Hoffman, M.; Etter, M.; Winter, J.; Lemos da Silva, L.; Seifert, D.; Hinterstein, M.
2020. Applied physics letters, 116 (18), Art. Nr.: 182902. doi:10.1063/5.0005401

Development and characterization of inks for screen printing of glass solders for SOFCs
Dittrich, S.; Reitz, E.; Schell, K. G.; Bucharsky, E. C.; Hoffmann, M. J.
2020. International journal of applied ceramic technology, 17 (3), 1304–1313. doi:10.1111/ijac.13461

Veränderung des weichmagnetischen Verhaltens von Fe-Si Elektroblech unter mechanisch-zyklischer Langzeitbeanspruchung. Dissertation
Zuber, R.
2020, April 7. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000118101

Ferroelectric Poling of Methylammonium Lead Iodide Thin Films
Röhm, H.; Leonhard, T.; Hoffmann, M. J.; Colsmann, A.
2020. Advanced functional materials, 30 (5), Art.Nr. 908657. doi:10.1002/adfm.201908657

The Sign of the Reaction Volume for the Water/Silica Reaction
Schell, K. G.; Bucharsky, E. C.; Fett, T.
2020. Glass physics and chemistry, 46 (1), 49–52. doi:10.1134/S1087659620010149

Effect of torsion loading on swelling in silica
Schell, K. G.; Bucharsky, C.; Fett, T.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000125229

Analysis of corrosion damage by Proctor et al
Schell, K. G.; Fett, T.; Bucharsky, C.; Rizzi, G.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000124594

Evaluation of crack profiles by Bando et al. - Application of COD-results from FE computations
Fett. T.; Schell, K. G.; Bucharsky, C.; Rizzi, G.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000123936

Crack-flank displacements for cracks with zones of reduced Young’s modulus
Rizzi, G.; Fett, T.; Schell, K. G.; Bucharsky, C.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000123333

Heart-shaped crack-tip zones - Effect of the zone length
Schell, K. G.; Bucharsky, C.; Rizzi, G.; Fett, T.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000122362

v-K-data for silica from lifetime measurements under step-shaped loading history
Fuller, E.; Fett, T.; Schell, K. G.; Hoffmann, M. J.; Wiederhorn, S. M.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000121100

Spontaneous ferroelectric order in lead-free relaxor N a B iTi O-based composites
K. V., L.; Hinterstein, M.; Lee, K.-Y.; Yang, T.; Chen, L.-Q.; Groszewicz, P. B.; Koruza, J.; Rödel, J.
2020. Physical review / B, 101 (17), Art.Nr. 174108. doi:10.1103/PhysRevB.101.174108

v-K-data for silica from interrupted lifetime measurements
Sglavo, V.; Fett. T.; Schell, K. G.; Hoffmann, M. J.; Wiederhorn, S. M.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000120054

Practical high-performance lead-free piezoelectrics: Structural flexibility beyond utilizing multiphase coexistence
Liu, Q.; Zhang, Y.; Gao, J.; Zhou, Z.; Yang, D.; Lee, K.-Y.; Studer, A.; Hinterstein, M.; Wang, K.; Zhang, X.; Li, L.; Li, J.-F.
2020. National Science Review, 7 (2), 355–365. doi:10.1093/nsr/nwz167

FE-Study on heart-shaped crack-tip zones
Rizzi, G.; Schell, K. G.; Bucharsky, C.; Fett, T.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000119395

Anomalous subcritical crack growth in silica
Fett. T.; Bucharsky, C.; Schell, K. G.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000119386

Interpreting rheology and electrical conductivity: It all boils down to which particle size
Cruz, R. C. D.; Segadães, A. M.; Mantas, P. Q.; Oberacker, R.; Hoffmann, M. J.
2020. Journal of colloid and interface science, 574, 97–109. doi:10.1016/j.jcis.2020.04.046

Electric-Field-Induced Phase Transformation and Frequency-Dependent Behavior of Bismuth Sodium Titanate–Barium Titanate
Lee, K.-Y.; Shi, X.; Kumar, N.; Hoffman, M.; Etter, M.; Checchia, S.; Winter, J.; Lemos da Silva, L.; Seifert, D.; Hinterstein, M.
2020. Materials, 13 (5), Article no: 1054. doi:10.3390/ma13051054

Comparison of Materialographic Preparation Methods for Nickel Bicrystals to be used in Thermal Grooving Experiments
Haremski, P.; Täffner, U.; Wührl, I.; Streeb, M.; Libuda, J.; Brettschneider, A.; Hoffmann, M. J.
2020. Practical metallography, 57 (1), 31–47. doi:10.3139/147.110615

Nondestructive evaluation of 3D microstructure evolution in strontium titanate
Trenkle, A.; Syha, M.; Rheinheimer, W.; Callahan, P. G.; Nguyen, L.; Ludwig, W.; Lenthe, W.; Echlin, M. P.; Pollock, T. M.; Weygand, D.; Graef, M.; Hoffmann, M. J.; Gumbsch, P.
2020. Journal of applied crystallography, 53, 349–359. doi:10.1107/S160057672000093X

Maximum shielding stress intensity factors in silica
Schell, K. G.; Bucharsky, C.; Rizzi, G.; Fett, T.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000117527

Crack-tip shielding in silica at room temperature
Fett, T.; Schell, K. G.; Bucharsky, C.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000105065

Neue Environmental Barrier Coatings für SiC/SiC-Faserverbundwerkstoffe durch PVD-Technologien. Dissertation
Leisner, V.
2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000104903

Zero stress aging in notched multi‐component glass fibers
Van Sant, J.; Diercks, D.; Fett, T.; Reimanis, I. E.
2019. Journal of the American Ceramic Society, 102 (11), 6552–6563. doi:10.1111/jace.16507

On the ferroelectricity of CH3NH3PbI3 perovskites
Schulz, A. D.; Röhm, H.; Leonhard, T.; Wagner, S.; Hoffmann, M. J.; Colsmann, A.
2019. Nature materials, 18 (10), 1050. doi:10.1038/s41563-019-0480-7

Antiferroelectric Pnma phase: the missing element to understand morphotropic phase boundary lead-free Na1/2Bi1/2TiO3-based piezoceramics
Hinterstein, M.; Haines, J.; Hansen, T.; Hermet, P.; Rouquette, J.
2019. Acta crystallographica / A, 75, Art. Nr.: e268. doi:10.1107/S205327331909288X

Non-Arrhenius grain growth in strontium titanate: Quantification of bimodal grain growth
Rheinheimer, W.; Schoof, E.; Selzer, M.; Nestler, B.; Hoffmann, M. J.
2019. Acta materialia, 174, 105–115. doi:10.1016/j.actamat.2019.05.040

In Situ Neutron Diffraction Studies on Poling of the Hard PZT Ceramic PIC181
Eßlinger, S.; Neumeister, P.; Schönecker, A.; Hoffman, M.; Studer, A.; Hinterstein, M.
2019. Advanced engineering materials, 21 (7), Art.-Nr.: 1900159. doi:10.1002/adem.201900159

Grain growth in strontium titanate in electric fields: The impact of space‐charge on the grain‐boundary mobility
Rheinheimer, W.; Parras, J. P.; Preusker, J.-H.; De Souza, R. A.; Hoffmann, M. J.
2019. Journal of the American Ceramic Society, 102 (6), 3779–3790. doi:10.1111/jace.16217

Microstructural, optical, and electrical characteristics of Ni/C doped BST thin films
Emadi, F.; Nemati, A.; Hinterstein, M.; Adabifiroozjaei, E.
2019. Ceramics international, 45 (5), 5503–5510. doi:10.1016/j.ceramint.2018.12.007

In situ study of electric-field-induced ferroelectric and antiferromagnetic domain switching in polycrystalline BiFeO
Liu, L.; Hinterstein, M.; Rojac, T.; Walker, J.; Makarovic, M.; Daniels, J.
2019. Journal of the American Ceramic Society, 102 (4), 1768–1775. doi:10.1111/jace.16014

Characterization of grain boundary disconnections in SrTiO3 Part II: the influence of superimposed disconnections on image analysis
Sternlicht, H.; Rheinheimer, W.; Kim, J.; Liberti, E.; Kirkland, A. I.; Hoffmann, M. J.; Kaplan, W. D.
2019. Journal of materials science, 54 (5), 3710–3725. doi:10.1007/s10853-018-3095-5

Characterization of grain boundary disconnections in SrTiO3 part I: the dislocation component of grain boundary disconnections
Sternlicht, H.; Rheinheimer, W.; Dunin-Borkowski, R. E.; Hoffmann, M. J.; Kaplan, W. D.
2019. Journal of materials science, 54 (5), 3694–3709. doi:10.1007/s10853-018-3096-4

Probing the Microstructure of Methylammonium Lead Iodide Perovskite Solar Cells
Leonhard, T.; Schulz, A. D.; Röhm, H.; Wagner, S.; Altermann, F. J.; Rheinheimer, W.; Hoffmann, M. J.; Colsmann, A.
2019. Energy technology, 7 (3), Art. Nr.: 1800989. doi:10.1002/ente.201800989

Herstellung dünner Folien aus Lithium-Lanthan-Titanat zur Anwendung als Festkörperelektrolyt. Dissertation
Schröckert, F.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000100762

Coordination Polymer to Atomically Thin, Holey, Metal-Oxide Nanosheets for Tuning Band Alignment
Mofarah, S. S.; Adabifiroozjaei, E.; Pardehkhorram, R.; Assadi, M. H. N.; Hinterstein, M.; Yao, Y.; Liu, X.; Ghasemian, M. B.; Kalantar-Zadeh, K.; Mehmood, R.; Cazorla, C.; Shahmiri, R.; Bahmanrokh, G.; Bhattacharyya, S.; Spadaro, M. C.; Arbiol, J.; Lim, S.; Xu, Y.; Arandiyan, H.; Scott, J.; Koshy, P.; Sorrell, C. C.
2019. Advanced materials, 31 (52), Article No.1905288. doi:10.1002/adma.201905288

Anomalous temperature behaviour of subcritical crack growth in silica
Fett, T.; Bucharsky, E. C.; Schell, K. G.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000099512

Partikelagglomeration und Partikelgrößenverteilung beim Speichern von Eisbreigemischen. Dissertation
Koffler, M.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000098350

Hydroxyl Damage in Silica: Full-range description including large damages
Fett, T.; Schell, G.; Bucharsky, C.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000097726

Einfluss mechanischer Lasten auf die Herstellung von Stahl-Glaskeramik-Verbunden. Dissertation
Ehreiser, B. S.
2019. KIT Scientific Publishing. doi:10.5445/KSP/1000097194

Water diffusion in cracked surface layers : Unloaded cracks
Fett, T.; Schell, G.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000096825

Inert strength measurement on silica soaked at 250°C in liquid water and water vapour
Hettich, P.; Wagner, S.; Schell, K. G.; Fett, T.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000096434

Determining fundamental properties from diffraction: Electric field induced strain and piezoelectric coefficient
Hinterstein, M.; Lee, K.-Y.; Esslinger, S.; Glaum, J.; Studer, A. J.; Hoffman, M.; Hoffmann, M. J.
2019. Physical review / B, 99 (17), Art.Nr. 174107. doi:10.1103/PhysRevB.99.174107

Revealing the role of local stress on the depolarization of BNT-BT-based relaxors
Glaum, J.; Heo, Y.; Acosta, M.; Sharma, P.; Seidel, J.; Hinterstein, M.
2019. Physical review materials, 3 (5), Art. Nr.: 054406. doi:10.1103/PhysRevMaterials.3.054406

Thermische Behandlung von Yttrium-stabilisiertem Zirkoniumdioxid am Beispiel von keramischen Mehrfolienlaminaten. Dissertation
Gehron, K.
2019. Karlsruher Institut für Technologie (KIT)

Oxidation of Ni-8YSZ anodes in Solid Oxide Fuel Cells - An "In status operandi" measurement method. Dissertation
Steenken, V.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000094776

Influence of PbO stoichiometry on the properties of PZT ceramics and multilayer actuators
Oldenkotte, M.; Kungl, H.; Eichel, R.-A.; Schönau, K. A.; Kühlein, M.; Bernard, T.; Hoffmann, M. J.; Hinterstein, M.
2019. Journal of the American Ceramic Society, 102, 5401–5414. doi:10.1111/jace.16417

Stress-enhanced silica/water reaction under torsion loading
Schell, K. G.; Fett, T.; Rizzi, G.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000094329

Experimental calibration for DCDC specimens
Hettich, P.; Zielonka, P.; Fünfschilling, S.; Schell, K. G.; Wagner, S.; Fett, T.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000093930

Elimination of swelling stresses from measurements of the equilibrium constant in silica
Fett, T.; Schell, K. G.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000093908

Effect of drilling-induced damage on the open hole flexural fatigue of carbon/epoxy composites
Haeger, A.; Grudenik, M.; Hoffmann, M. J.; Knoblauch, V.
2019. Composite Structures, 215, 238–248. doi:10.1016/j.compstruct.2019.02.025

Evaluation of crack-terminating angles in heat-treated silica DCDC-specimens
Hettich, P.; Schell, K. G.; Rizzi, G.; Wagner, S.; Fett, T.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000092734

Film formation, microstructure and ferroelectricity of MAPbI3 light-harvesting layers
Röhm, H.; Leonhard, T.; Schulz, A.; Wagner, S.; Hoffmann, M.; Colsmann, A.
2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Chemische Physik und Polymerphysik (2019), Regensburg, Deutschland, 31. März–5. April 2019

Ferroelectric Properties of Perovskite Thin Films and Their Implications for Solar Energy Conversion
Röhm, H.; Leonhard, T.; Schulz, A. D.; Wagner, S.; Hoffmann, M. J.; Colsmann, A.
2019. Advanced materials, Art.Nr.: 1806661. doi:10.1002/adma.201806661

Enhanced antiferroelectric phase stability in La-doped AgNbO₃: Perspectives from the microstructure to energy storage properties
Gao, J.; Zhang, Y.; Zhao, L.; Lee, K.-Y.; Liu, Q.; Studer, A.; Hinterstein, M.; Zhang, S.; Li, J.-F.
2019. Journal of materials chemistry / A, 7 (5), 2225–2232. doi:10.1039/c8ta09353a

Evaluation of crack profiles by Bando et al. Analysis of crack opening displacements
Fett, T.; Schell, K. G.; Rizzi, G.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000091103

The sign of the reaction volume for the water/silica reaction
Schell, G.; Fett, T.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000091101

Development and characterization of half-cells based on thin solid state ionic conductors for Li-ion batteries
Schiffmann, N.; Schröckert, F.; Bucharsky, E. C.; Schell, K. G.; Hoffmann, M. J.
2019. Solid state ionics, 333, 66–71. doi:10.1016/j.ssi.2019.01.020

Damage and Young’s modulus reduction in silica by hydroxyl generation
Fett, T.; Schell, G.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000089939

The role of point defects and defect gradients in flash sintering of perovskite oxides
Rheinheimer, W.; Phuah, X. L.; Wang, H.; Lemke, F.; Hoffmann, M. J.; Wang, H.
2019. Acta materialia, 165, 398–408. doi:10.1016/j.actamat.2018.12.007

Processing and characterization of elastic and thermal expansion behaviour of interpenetrating Al12Si/alumina composites
Roy, S.; Schell, K. G.; Bucharsky, E. C.; Weidenmann, K. A.; Wanner, A.; Hoffmann, M. J.
2019. Materials science and engineering / A, 743, 339–348. doi:10.1016/j.msea.2018.11.100

Crack‐tip toughness of lead‐free (1−)(NaBi)TiO-BaTiO
Vögler, M.; Fett, T.; Rödel, J.
2018. Journal of the American Ceramic Society, 101 (12), 5304–5308. doi:10.1111/jace.15972

Reduction of the Sintering Temperature for the Manufacturing of Carbon-Rich Dense SiOC Bulk Ceramics
Mantzel, N.; Schröckert, F.; Bucharsky, E. C.; Schell, K. G.; Hoffmann, M. J.; Scheffler, M.
2018. Advanced engineering materials, 20 (10), Art. Nr.: 1800369. doi:10.1002/adem.201800369

Process development for the ceramic injection molding of oxide chopped fiber reinforced CMCs
Tülümen, M.; Ehreiser, B.; Hanemann, T.; Oberacker, R.; Piotter, V.
2018, September. WorldPM (2018), Beijing, China, 16.–20. September 2018

Influence of microstructure on symmetry determination of piezoceramics
Hinterstein, M.; Mgbemere, H. E.; Hoelzel, M.; Adabifiroozjaei, E.; Sorrell, C.; Hoffman, M.
2018. Acta crystallographica / A, 74 (a2), e264. doi:10.1107/S2053273318091192

Long-term thermal stability of two-phased lithium orthosilicate/metatitanate ceramics
Heuser, J. M.; Kolb, M. H. H.; Bergfeldt, T.; Knitter, R.
2018. Journal of nuclear materials, 507, 396–402. doi:10.1016/j.jnucmat.2018.05.010

Effect of damage by hydroxyl generation on strength of silica fibers
Fett, T.; Schell, K. G.; Hoffmann, M. J.; Wiederhorn, S. M.
2018. Journal of the American Ceramic Society, 101 (7), 2724–2726. doi:10.1111/jace.15508

On the importance of ferroelectric domains for the performance of perovskite solar cells
Rossi, D.; Pecchia, A.; Auf der Maur, M.; Leonhard, T.; Röhm, H.; Hoffmann, M. J.; Colsmann, A.; Carlo, A. D.
2018. Nano energy, 48, 20–26. doi:10.1016/j.nanoen.2018.02.049

Anti-thermal grain growth in SrTiO 3 : Coupled reduction of the grain boundary energy and grain growth rate constant
Kelly, M. N.; Rheinheimer, W.; Hoffmann, M. J.; Rohrer, G. S.
2018. Acta materialia, 149, 11–18. doi:10.1016/j.actamat.2018.02.030

Corrosion characteristics of reduced activation ferritic-martensitic steel EUROFER by Li 2 TiO 3 with excess Li
Mukai, K.; Sanchez, F.; Hoshino, T.; Knitter, R.
2018. Nuclear materials and energy, 15, 190–194. doi:10.1016/j.nme.2018.04.010

Structural characterization of (Sm,Tb)PO₄ solid solutions and pressure-induced phase transitions
Heuser, J. M.; Palomares, R. I.; Bauer, J. D.; Rodriguez, M. J. L.; Cooper, J.; Lang, M.; Scheinost, A. C.; Schlenz, H.; Winkler, B.; Bosbach, D.; Neumeier, S.; Deissmann, G.
2018. Journal of the European Ceramic Society, 38 (11), 4070–4081. doi:10.1016/j.jeurceramsoc.2018.04.030

Diffusion of water in silica: Influence of moderate stresses
Wiederhorn, S. M.; Rizzi, G.; Wagner, S.; Schell, G.; Hoffmann, M. J.; Fett, T.
2018. Journal of the American Ceramic Society, 101 (3), 1180–1190. doi:10.1111/jace.15195

Stress-dependent crystal structure of lanthanum strontium cobalt ferrite by in situ synchrotron X-ray diffraction
Geiger, P. T.; Khansur, N. H.; Riess, K.; Martin, A.; Hinterstein, M.; Webber, K. G.
2018. Journal of applied physics, 123 (7), Art. Nr.: 075104. doi:10.1063/1.5017934

Discrete element method for effective thermal conductivity of packed pebbles accounting for the Smoluchowski effect
Moscardini, M.; Gan, Y.; Pupeschi, S.; Kamlah, M.
2018. Fusion engineering and design, 127, 192–201. doi:10.1016/j.fusengdes.2018.01.013

Probing the microstructure of methylammonium lead iodide solar cells
Leonhard, T.; Röhm, H.; Schulz, A.; Wagner, S.; Altermann, F.; Rheinheimer, W.; Hoffmann, M. J.; Colsmann, A.
2018. Light, Energy and the Environment 2018 (E2, FTS, HISE, SOLAR, SSL). Proceedings., Art.-Nr.: OM2D.6, Optica Publishing Group (OSA). doi:10.1364/OSE.2018.OM2D.6

Tape casted thin films of solid electrolyte Lithium-Lanthanum-Titanate
Schröckert, F.; Schiffmann, N.; Bucharsky, E. C.; Schell, K. G.; Hoffmann, M. J.
2018. Solid state ionics, 328, 25–29. doi:10.1016/j.ssi.2018.10.028

Anisotropic Swelling for different Stress States
Fett, T.; Schell, G.; Rizzi, G.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000087721

Swelling strains from gamma-irradiated silica - Evaluation of results by Shelby
Fett, T.; Schell, K. G.; Wiederhorn, S. M.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000087519

Tintenstrahldruck organisch/anorganischer Komposite. Dissertation
Mikolajek, M.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000086899

Control of the Surface Morphology of Ceramic/Polymer Composite Inks for Inkjet Printing
Mikolajek, M.; Reinheimer, T.; Muth, M.; Hohwieler, P.; Hoffmann, M. J.; Binder, J. R.
2018. Advanced engineering materials, 20 (9), 1800318. doi:10.1002/adem.201800318

New materials for powder injection molding - High entropy alloys and ceramic matrix composites
Piotter, V.; Plewa, K.; Oberacker, R.; Tueluemen, M.; Wagner, J.
2018. Funtai-oyobi-funmatsu-yakin, 65 (7), 427–430. doi:10.2497/jjspm.65.427

Relaxor-ferroelectric transitions: Sodium bismuth titanate derivatives (Review)
Paterson, A. R.; Nagata, H.; Tan, X.; Daniels, J. E.; Hinterstein, M.; Ranjan, R.; Groszewicz, P. B.; Jo, W.; Jones, J. L.
2018. MRS bulletin, 43 (8), 600–606. doi:10.1557/mrs.2018.156

Influence of microstructure on symmetry determination of piezoceramics
Hinterstein, M.; Mgbemere, H. E.; Hoelzel, M.; Rheinheimer, W.; Adabifiroozjaei, E.; Koshy, P.; Sorrell, C. C.; Hoffman, M.
2018. Journal of applied crystallography, 51, 670–678. doi:10.1107/S1600576718003916

Water concentration and swelling stresses at silica surfaces derived from literature data - Estimation of mass-transfer coefficients
Fett, T.; Schell, G.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083681

Radiation effects in Sm-monazite - a potential waste matrix for plutonium and minor actinides
Heuser, J. M.; Ji, Y.; Klinkenberg, M.; Kowalski Piotr M.; Schlenz, H.; Neumeier, S.; Bosbach, D.; Deissmann, G.
2018. GeoBonn (2018), Bonn, Deutschland, 2.–6. September 2018

Neutron radiation induced defects and radiolysis products in lithium silicate breeder pebbles
Heuser, J.; Zarins, A.; Baumane, L.; Avotina, L.; Halitovs, M.; Kizane, G.; Knitter, R.
2018. The Nuclear Materials Conference (NuMat 2018), Seattle, WA, USA, 14.–18. Oktober 2018

Challenges in lithium-ion battery electrode-processing using nanostructured LiNi0.33Co0.33Mn0.33O₂
Müller, M.; Bohn, N.; Bauer, W.; Binder, J. R.
2018. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Deutschland, 26.–28. September 2018

Einfluss herstellungs- und bearbeitungsinduzierter Fehlstellen auf das Festigkeitsverhalten kohlenstofffaserverstärkter Kunststoffe. Dissertation
Häger, A.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083225

Degradationsmechanismen großformatiger Lithium-Ionen-Batterien für Elektrofahrzeuge. Dissertation
Lang, M.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000082774

Damage in silica by hydroxyl generation : Behaviour at crack tips
Fett, T.; Schell, G.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000082414

Synthesis and characterization of hierarchically structured cathode materials for lithium ion batteries
Binder, J. R.; Höweling, A.; Bohn, N.; Wagner, A.
2018. 93. Jahrestagung der Deutschen Keramischen Gesellschaft in Verbindung mit dem Symposium Hochleistungskeramik (2018), München, Deutschland, 10.–13. April 2018

Investigation of the thermal expansion of lithium orthosilicate
Kolb, M. H. H.; Leys, O.; Knitter, R.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018

X-ray induced defects in advanced lithium orthosilicate pebbles with additions of lithium metatitanate
Cipa, J.; Zarins, A.; Supe, A.; Kizane, G.; Zolotarjovs, A.; Baumane, L.; Trinklere, L.; Leys, O.; Knitter, R.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018

Thermal diffusivity of ceramic breeder beds
Pupeschi, S.; Knitter, R.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018

Radiolysis study of EU Li 4 SIO4 reference breeder material from the HICU experiment
Heuser, J. M.; Zarins, A.; Baumane, L.; Vitins, A.; Petjukevics, A.; Kizane, G.; Knitter, R.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018

Enhanced Droplet Control for the Fabrication of Ceramic Breeder Pebbles
Leys, O.; Haas, M.; Waibel, P.; Matthes, J.; Knitter, R.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italien, 16.–21. September 2018

Damage in silica by hydroxyl generation described by Wang’s theoretical data
Fett, T.; Schell, G.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000081283

Powder Technology From the Point of Battery Manufacturing
Bauer, W.
2018. Team Day (2018), München, Deutschland, 8. April 2018

HiKoMat - Material design of hierarchemical storage
Wagner, A.; Bohn, N.; Binder, J.; Thauer, E.; Klingler, R.; Osenberg, M.; Hilger, A.; Manke, I.; Banhart, J.; Neumann, M.; Schmidt, V.; Zahnov, J.; Elm, M.; Janek, J.; Burkhardt, S.; Klar, P.; Birkholz, O.; Kamlah, M.; Wetterauer, S.; Carraro, T.
2018. 8th Advanced Automotive Battery Conference (AABC 2018), Mainz, Deutschland, 29. Januar–1. Februar 2018

Impact of pH on the aqueous processing of cathodes for lithium ion
Bauer, W.; Kaufmann, U.; Müller, M.
2018. 93. DKG-Jahrestagung und Symposium Hochleistungskeramik (2018), München, Deutschland, 10.–13. April 2018

Stress-enhanced swelling of silica: Effect on residual deformation of bent fibers
Fett, T.; Schell, G.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000080571

Hydroxyl concentrations on crack surfaces from measurements by Tomozawa, Han and Lanford
Schell, G.; Rizzi, G.; Fett, T.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000080284

Thermomechanical characterization of advanced ceramic breeder beds for fusion blankets. Dissertation
Pupeschi, S.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000080092

Error sources and geometry effects in DCDC-tests
Schell, G.; Rizzi, G.; Hettich, P.; Zielonka, P.; Wagner, S.; Fett, T.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000080046

Liquid PMMA : A High Resolution Polymethylmethacrylate Negative Photoresist as Enabling Material for Direct Printing of Microfluidic Chips
Kotz, F.; Arnold, K.; Wagner, S.; Bauer, W.; Keller, N.; Nargang, T. M.; Helmer, D.; Rapp, B. E.
2018. Advanced engineering materials, 20 (2), Art.Nr. 1700699. doi:10.1002/adem.201700699

Untersuchung der Hochvoltstabilität und Tiefentladung von dotierten LiNi0,5Mn1,5O4-Hochvoltspinellen. Dissertation
Höweling, A.
2018. KIT Scientific Publishing. doi:10.5445/KSP/1000074496

Between Scylla and Charybdis: Balancing Among Structural Stability and Energy Density of Layered NCM Cathode Materials for Advanced Lithium-Ion Batteries
Biasi, L. de; Kondrakov, A. O.; Geßwein, H.; Brezesinski, T.; Hartmann, P.; Janek, J.
2017. The journal of physical chemistry <Washington, DC> / C, 121 (47), 26163–26171. doi:10.1021/acs.jpcc.7b06363

Charge Transfer-Induced Lattice Collapse in Ni-Rich NCM Cathode Materials during Delithiation
Kondrakov, A. O.; Geßwein, H.; Galdina, K.; De Biasi, L.; Meded, V.; Filatova, E. O.; Schumacher, G.; Wenzel, W.; Hartmann, P.; Brezesinski, T.; Janek, J.
2017. The journal of physical chemistry <Washington, DC> / C, 121 (44), 24381–24388. doi:10.1021/acs.jpcc.7b06598

Advanced Ceramic Breeder Pebbles – Thermal Long-Term and Radiation Stability
Heuser, J. M.; Zariņš, A.; Ķizane, G.; Baumane, L.; Knitter, R.
2017. The 18th International Conference on Fusion Reactor Materials (ICFRM-18), Aomori, J, November 5-10, 2017

Corrosion characteristics of reduced activation ferritic-martensitic steel EUROFER by Li2TiO3 with excess Li
Mukai, K.; Sanchez, F.; Hoshino, T.; Knitter, R.
2017. The 18th International Conference on Fusion Reactor Materials (ICFRM-18), Aomori, J, November 5-10, 2017

Radiolysis of advanced lithium orthosilicate pebbles with additions of lithium metatitanate
Zarins, A.; Kizane, G.; Valtenbergs, O.; Cipa, J.; Supe, A.; Baumane, L.; Zolotarjovs, A.; Leys, O.; Knitter, R.
2017. The 18th International Conference on Fusion Reactor Materials (ICFRM-18), Aomori, J, November 5-10, 2017

Development and Qualification of Functional Materials for the European HCPB TBM
Zmitko, M.; Poitevin, Y.; Vladimirov, P.; Knitter, R.; Kolb, M.; Leys, O.; Heuser, J.; Schneider, H. C.; Rolli, R.; Chakin, V.; Pupeschi, S.; Magielsen, L.; Fedorov, A.
2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyōto, Japan, 25.–29. September 2017

The HICU PIE Results of EU Reference Ceramic Breeder Pebbles
Kolb, M. H. H.; Heuser, J. M.; Rolli, R.; Knitter, R.; Zmitko, M.
2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyōto, Japan, 25.–29. September 2017

Wall effects on cyclic behavior of ceramic pebble beds under mechanical loading
Pupeschi, S.; Moscardini, M.; Gan, Y.; Knitter, R.; Kamlah, M.
2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyōto, Japan, 25.–29. September 2017

D2-release behaviour of long-term annealed e--irradiated ceramic breeders
Heuser, J. M.; Malo, M.; González, M.; Knitter; María
2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyōto, Japan, 25.–29. September 2017

Introduction of Lithium Orthogermanate into Advanced Ceramic Breeders
Ley, O.; Pucci, A.; Mukai, K.; Kolb, M.; Knitter, R.
2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyōto, Japan, 25.–29. September 2017

Effect of moisture in sweep gas on chemical compatibility between ceramic breeder and EUROFER97
Mukai, K.; Gonzalez, M.; Knitter, R.
2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyōto, Japan, 25.–29. September 2017

Comparative Study of Deuterium Release Behaviour in HCPB Lithium-based Breeder Pebble Candidates
Gonzalez, M.; Malo, M.; Chaudhuri, P.; Heuser, J. M.; Knitter, R.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

Thermal Long-Term and Radiation Stability of Advanced Ceramic Breeder Pebbles
Heuser, J. M.; Zarins, A.; Kizane, G.; Baumane, L.; Petjukevics, A.; Knitter, R.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

Comparison of the chemical compatibility between EUROFER97 and ceramic breeder under dry and moist atmospheres
Mukai, K.; Gonzalez, M.; Knitter, R.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

Lithium Orthogermanate Additions to Advanced Ceramic Breeders
Knitter, R.; Pucci, A.; Leys, O.; Kolb, M. H. H.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

The KALOS Process: Increased Yield and Droplet Size Control with an Induced Jet Break-Up
Leys, O.; Waibel, P.; Knitter, R.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

Effects of Irradiation Conditions on EU Ceramic Breeder Properties:Results from HICU PIE
Kolb, M. H. H.; Heuser, J.; Rolli, R.; Knitter, R.; Zmitko, M.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

Thermomechanical characterization of advanced ceramic breeder beds
Pupeschi, S.; Moscardini, M.; Gan, Y.; Knitter, R.; Kamlah, M.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

Effect of negative T-stress on R-curves for Si3N4-ceramics
Zielonka, P.; Hettich, P.; Fünfschilling, S.; Schell, G.; Rizzi, G.; Fett, T.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000078268

Crack growth exponent n for water-vapour soaked silica
Fett, T.; Schell, G.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000078161

Development and qualification of ceramic breeder materials for the European HCPB TBM
Zmitko, M.; Knitter, R.; Kolb, M.; Leys, O.; Heuser, J.; Schneider, H. C.; Rolli, R.; Pupeschi, S.; Magielsen, L.
2017. 19th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-19), Kyoto, J, September 21-23, 2017

Shape-controlled synthesis of hierarchically layered lithium transition-metal oxide cathode materials by shear exfoliation in continuous stirred-tank reactors
Hua, W.; Wu, Z.; Chen, M.; Knapp, M.; Guo, X.; Indris, S.; Binder, J. R.; Bramnik, N. N.; Zhong, B.; Guo, H.; Chou, S.; Kang, Y.-M.; Ehrenberg, H.
2017. Journal of materials chemistry / A, 5 (48), 25391–25400. doi:10.1039/C7TA08073E

New insights into phosphate based materials for the immobilisation of actinides
Neumeier, S.; Arinicheva, Y.; Ji, Y.; Heuser, J. M.; Kowalski, P. M.; Kegler, P.; Schlenz, H.; Bosbach, D.; Deissmann, G.
2017. Radiochimica acta, 105 (11), 961–984. doi:10.1515/ract-2017-2819

Flexible und dichte keramische Verbundseparatoren für Na-S-Mitteltemperaturzellen. Dissertation
Ahlbrecht, K.
2017. Fraunhofer Verlag

Erweiterung der Materialpalette des Pulverspritzgießens - Hoch-Entropie-Legierungen und keramikfaserverstärkte Keramiken
Piotter, V.; Oberacker, R.; Plewa, K.; Tülümen, M.; Wagner, J.
2017. 8. Kolloquium Mikroproduktion, Bremen, 27.-28.11.2017. Hrsg.: F. Vollertsen, 135–140, Verlag BIAS

OLED Luminaires : Device Arrays with 99.6% Geometric Fill Factor Structured by Femtosecond Laser Ablation
García, J. F.; Höfle, S.; Zhang, M.; Dlugosch, J.; Friedrich, T.; Wagner, S.; Colsmann, A.
2017. ACS applied materials & interfaces, 9 (43), 37898–37904. doi:10.1021/acsami.7b12356

Mass transfer coefficients for water at silica surfaces : Additional results
Schell, G.; Fett, T.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000076415

Effect of moisture in sweep gas on chemical compatibility between ceramic breeder and EUROFER97
Mukai, K.; Gonzalez, M.; Knitter, R.
2017. Fusion engineering and design, 125, 154–159. doi:10.1016/j.fusengdes.2017.10.001

Water diffusion in thin silica sheets : Effect of swelling stress on diffusivity
Fett, T.; Schell, G.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000075772

Micron‐Sized Pored Membranes Based on Polyvinylidene Difluoride Hexafluoropropylene Prepared by Phase Inversion Techniques
Hofmann, A.; Thißen, E.; Migeot Matthias; Bohn, N.; Dietrich, S.; Hanemann, T.
2017. Polymers, 9 (10), 489/1–12. doi:10.3390/polym9100489

Untersuchung der Hochvoltstabilität und Tiefentladung von dotierten LiNi0,5Mn1,5O4 - Hochvoltspinellen. Dissertation
Höweling, A.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000074470

Analytical solutions of the diffusion differential equation
Fett, T.; Schell, G.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000073611

Failure behavior of high performance porcelain insulators = Versagensverhalten von Hochspannungs-Tonerde-Porzellanisolatoren
Hettich, P.; Schell, K. G.; Oberacker, R.; Bucharsky, E. C.; Schulte-Fischedick, J.; Hoffmann, M. J.
2017. Materialwissenschaft und Werkstofftechnik, 48 (8), 792–796. doi:10.1002/mawe.201700034

LiCaFeF₆ : A zero-strain cathode material for use in Li-ion batteries
Biasi, L. de; Lieser, G.; Dräger, C.; Indris, S.; Rana, J.; Schumacher, G.; Mönig, R.; Ehrenberg, H.; Binder, J. R.; Geßwein, H.
2017. Journal of power sources, 362, 192–201. doi:10.1016/j.jpowsour.2017.07.007

Cutting edge of R&D in solid tritium breeder materials. Towards the ’solid’ blankets
Hoshino, T.; Mukai, K.; Kolb, M. H. H.; Knitter, R.
2017. Journal of plasma and fusion research, 93 (2), 83–90

Herstellung von LATP für den Einsatz als Festkörperelektrolyt und dessen Eigenschaften. Dissertation
Hupfer, T.
2017. KIT Scientific Publishing. doi:10.5445/KSP/1000072347

Thermal evolution of polar nanoregions identified by the relaxation time of electric modulus in the BiNaTiO system
Liu, L.; Ma, X.; Knapp, M.; Ehrenberg, H.; Peng, B.; Fang, L.; Hinterstein, M.
2017. epl, 118 (4), Art. Nr. 47001. doi:10.1209/0295-5075/118/47001

Increase in cycling stability of doped lithium nickel manganese oxide spinels during charging between 2.0 and 5.0 V
Höweling, A.; Stoll, A.; Geßwein, H.; Binder, J. R.
2017. 231st ECS Meeting, New Orleans, LA, May 28 - June 1, 2017

Highvoltage-spinels for lithium-Ion batteries: Effects of synthesis and composition on the cycling stability
Höweling, A.; Binder, J. R.
2017. 92. DKG Jahrestagung in Verbindung mit dem Symposium Hochleistungskeramik, Berlin, 19.-22.März 2017

Behaviour of advanced tritium breeder pebbles under simultaneous action of accelerated electrons and high temperature
Zarins, A.; Leys, O.; Kizane, G.; Supe, A.; Baumane, L.; Gonzalez, M.; Correcher, V.; Boronat, C.; Zolotarjovs, A.; Knitter, R.
2017. Fusion engineering and design, 121, 167–173. doi:10.1016/j.fusengdes.2017.06.033

Nonlinear mechanical behaviour of Ba0.5Sr0.5Co0.8Fe0.2O3 − δ and in situ stress dependent synchrotron X-ray diffraction study
Geiger, P. T.; Clemens, O.; Khansur, N. H.; Hinterstein, M.; Sahini, M. G.; Grande, T.; Tung, P.; Daniels, J. E.; Webber, K. G.
2017. Solid state ionics, 300, 106–113. doi:10.1016/j.ssi.2016.11.027

Electric-Field-Induced Phase Transition in Mn-Doped (K0.48Na0.48Li0.04)NbO3 Lead-Free Ceramics
Mgbemere, H. E.; Schneider, G. A.; Schmitt, L.; Hinterstein, M.
2017. Journal of ceramic science and technology, 8 (1), 45–52. doi:10.4416/JCST2016-00074

Diffusion of water in silica glass in the absence of stresses
Wiederhorn, S. M.; Rizzi, G.; Wagner, S.; Hoffmann, M. J.; Fett, T.
2017. Journal of the American Ceramic Society, 100 (9), 3895–3902. doi:10.1111/jace.14937

Identification of residual stress layers at glass surfaces via crack terminating angles
Schell, K. G.; Wagner, S.; Hettich, P.; Fett, T.; Rizzi, G.; Hoffmann, M. J.
2017. Journal of the American Ceramic Society, 100 (9), 4173–4179. doi:10.1111/jace.14964

Tracing the oxygen isotope composition of the upper Earth’s atmosphere using cosmic spherules
Pack, A.; Höweling, A.; Hezel, D. C.; Stefanak, M. T.; Beck, A.-K.; Peters, S. T. M.; Sengupta, S.; Herwartz, D.; Folco, L.
2017. Nature Communications, 8, Art. Nr.: 15702. doi:10.1038/ncomms15702

Präparation weichmagnetischer Kompositwerkstoffe für strukturelle und mikromechanische Untersuchungen [Preparing Soft Magnetic Composites for Structural and Micromechanical Investigations]
Schwark, T.; Müller, M.; Mine, Y.; Kreuter, T.; Kraft, O.; Schwaiger, R.
2017. Practical Metallography : Praktische Metallographie, 54 (6), 366–387. doi:10.3139/147.110424

Ferroelectric domains in methylammonium lead iodide perovskite thin-films
Röhm, H.; Leonhard, T.; Hoffmann, M. J.; Colsmann, A.
2017. Energy & environmental science, 10 (4), 950–955. doi:10.1039/C7EE00420F

Characterization and modeling of the mechanical properties of wound oxide ceramic composites. Dissertation
Shi, Y.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000070478

Implementation of BaSrTiO₃-ZnO-B₂O₃ based tunable microwave phase shifters in LTCC technology
Kohler, C.; Nikfalazar, M.; Heunisch, A.; Schulz, B.; Mikolajek, M.; Rabe, T.; Jakoby, R.; Binder, J. R.
2017. International journal of applied ceramic technology, 14 (4), 574–582. doi:10.1111/ijac.12687

Investigation of injection molded short-fiber reinforced CMCs
Piotter, V.; Tülümen, M.; Oberacker, R.
2017. 92. DKG Jahrestagung mit Symposium Hochleistungskeramik 2017 (92nd DKG Annual Meeting and Symposium on High-Performance Ceramics 2017), Berlin 20.03.-22.03.2017

Two-Dimensional Beam-Steering Phased-Array Antenna With Compact Tunable Phase Shifter Based on BST Thick Films
Nikfalazar, M.; Sazegar, M.; Mehmood, A.; Wiens, A.; Friederich, A.; Maune, H.; Binder, J. R.; Jakoby, R.
2017. IEEE antennas and wireless propagation letters, 16, 585–588. doi:10.1109/LAWP.2016.2591078

Tritium adsorption/release behaviour of advanced EU breeder pebbles
Kolb, M. H. H.; Rolli, R.; Knitter, R.
2017. Journal of nuclear materials, 489, 229–235. doi:10.1016/j.jnucmat.2017.03.051

Ceramic breeder research at Karlsruhe Institute of Technology
Heuser, J. M.
2017. University of Latvia, Riga, 8.April 2017

Three-dimensional printing of transparent fused silica glass
Kotz, F.; Arnold, K.; Bauer, W.; Schild, D.; Keller, N.; Sachsenheimer, K.; Nargang, T. M.; Richter, C.; Helmer, D.; Rapp, B. E.
2017. Nature <London>, 544 (7650), 337–339. doi:10.1038/nature22061

Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds
Dai, W.; Pupeschi, S.; Hanaor, D.; Gan, Y.
2017. Fusion engineering and design, 118, 45–51. doi:10.1016/j.fusengdes.2017.03.073

Chemical compatibility study between ceramic breeder and EUROFER97 steel for HCPB-DEMO blanket
Mukai, K.; Sanchez, F.; Knitter, R.
2017. Journal of nuclear materials, 488, 196–203. doi:10.1016/j.jnucmat.2017.03.018

Der ’Brennstoff’ der Kernfusion
Knitter, R.
2017. 15. Treffen des DGG-DKG Arbeitskreises ’Glasig-kristalline Multifunktionswerkstoffe’ (2017), Karlsruhe, Deutschland, 2.–3. März 2017

Silica in humid air environment: (II): Diffusion under moderate stresses
Fett, T.; Wiederhorn, S. M.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000068620

Effective thermal conductivity of advanced ceramic breeder pebble beds
Pupeschi, S.; Knitter, R.; Kamlah, M.
2017. Fusion engineering and design, 116, 73–80. doi:10.1016/j.fusengdes.2017.01.026

Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries
Kondrakov, A. O.; Schmidt, A.; Xu, J.; Geßwein, H.; Mönig, R.; Hartmann, P.; Sommer, H.; Brezesinski, T.; Janek, J.
2017. The journal of physical chemistry <Washington, DC> / C, 121 (6), 3286–3294. doi:10.1021/acs.jpcc.6b12885

Investigation of the wetting behavior of Na and Na alloys on uncoated and coated Na-β”-alumina at temperatures below 150 °C
Ahlbrecht, K.; Bucharsky, C.; Holzapfel, M.; Tübke, J.; Hoffmann, M. J.
2017. Ionics, 23 (5), 1319–1327. doi:10.1007/s11581-017-2017-x

Consequence of Damage in Silica on Young’s Modulus
Fett, T.; Schell, G.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000067363

Influence of synthesis, dopants and cycling conditions on the cycling stability of doped LiNi0.5Mn1.5O4 spinels
Höweling, A.; Stoll, A.; Schmidt, D. O.; Geßwein, H.; Simon, U.; Binder, J. R.
2017. Journal of the Electrochemical Society, 164 (1), A6349-A6358. doi:10.1149/2.0521701jes

Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities
Zariņš, A.; Valtenbergs, O.; Ķizane, G.; Supe, A.; Tamulevičius, S.; Andrulevičius, M.; Pajuste, E.; Baumane, L.; Leys, O.; Kolb, M. H. H.; Knitter, R.
2017. Fusion engineering and design, 124, 934–939. doi:10.1016/j.fusengdes.2017.01.008

Double layer electrical conductivity as a stability criterion for concentrated colloidal suspensions
Cruz, R. C. D.; Segadães, A. M.; Oberacker, R.; Hoffmann, M. J.
2017. Colloids and surfaces / A, 520, 9–16. doi:10.1016/j.colsurfa.2017.01.059

CAD-assisted modeling of high dielectric contrast composite materials
Wiens, A.; Kohler, C.; Hansli, M.; Schuessler, M.; Jost, M.; Maune, H.; Binder, J. R.; Jakoby, R.
2017. Journal of the European Ceramic Society, 37, 1487–1494. doi:10.1016/j.jeurceramsoc.2016.10.032

Li₄SiO₄ based breeder ceramics with Li₂TiO₃, LiAlO₂ and LiₓLayTiO₃ additions, part I: Fabrication
Kolb, M. H. H.; Mukai, K.; Knitter, R.; Hoshino, T.
2017. Fusion engineering and design, 115, 39–48. doi:10.1016/j.fusengdes.2016.12.033

Li₄SiO₄ based breeder ceramics with Li₂TiO₃, LiAlO₂ and LiₓLaYTiO₃ additions, part II: Pebble properties
Kolb, M. H. H.; Knitter, R.; Hoshino, T.
2017. Fusion engineering and design, 115, 6–16. doi:10.1016/j.fusengdes.2016.12.038

Energieoptimierte Trennung von Eis - Aluminiumverbindungen durch induktiv erzeugte Wärmeimpulse. Dissertation
Schaaf, J.
2017. Logos Verlag Berlin

A comparison of power controlled flash sintering and conventional sintering of strontium titanate
Lemke, F.; Rheinheimer, W.; Hoffmann, M. J.
2017. Scripta materialia, 130, 187–190. doi:10.1016/j.scriptamat.2016.12.008

Investigation of binder distribution in graphite anodes for lithium-ion batteries
Müller, M.; Pfaffmann, L.; Jaiser, S.; Baunach, M.; Trouillet, V.; Scheiba, F.; Scharfer, P.; Schabel, W.; Bauer, W.
2017. Journal of power sources, 340, 1–5. doi:10.1016/j.jpowsour.2016.11.051

Microstructure and mechanical properties of Li0.33La0.567TiO3
Schell, K. G.; Lemke, F.; Bucharsky, E. C.; Hintennach, A.; Hoffmann, M. J.
2017. Journal of materials science, 52 (4), 2232–2240. doi:10.1007/s10853-016-0516-1

The equilibrium crystal shape of strontium titanate: Impact of donor doping
Rheinheimer, W.; Altermann, F. J.; Hoffmann, M. J.
2017. Scripta materialia, 127, 118–121. doi:10.1016/j.scriptamat.2016.09.017

Si3N4-Ceramics: An Introduction
Hoffmann, M. J.
2016. Encyclopedia of Materials: Technical Ceramics and Glasses. Ed. by Michael Pomeroy, 105–108, Elsevier. doi:10.1016/B978-0-12-818542-1.02324-9

Tunable lumped-element-filter for RF power applications based on printed ferroelectrics
Schuster, C.; Wiens, A.; Schubler, M.; Jakoby, R.; Kohler, C.; Binder, J. R.
2016. German Microwave Conference (GeMiC), Bochum, March 14-16, 2016, 229–232, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/GEMIC.2016.7461597

Zeitaufgelöste Untersuchung der Li-Insertion in neuartigen LiMeIIMeIIIF6-Kathodenmaterialien mittels in situ Röntgenbeugung. Dissertation
Biasi, L. J. de
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000069328

Post-irradiation examination of EU Li₄SiO₄ reference breeder material from the HICU experiment
Heuser, J. M.; Kolb, M. H. H.; Rolli, R.; Knitter, R.; Zmitko, M.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

A fully-printed MIM varactor for high power application
Kienemund, D.; Kohler, C.; Fink, T.; Abrecht, M.; Wiens, A.; Bigler, W.; Binder, J. R.; Maune, H.; Jakoby, R.
2016. 2016 46th European Microwave Conference (EuMC), London, United Kingdom, 4–6 October 2016, 623–626, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMC.2016.7824420

Hairpin bandpass filter with tunable center frequency and tunable bandwidth based on screen printed ferroelectric varactors
Schuster, C.; Wiens, A.; Schusler, M.; Kohler, C.; Binder, J.; Jakoby, R.
2016. 46th European Microwave Conference (EuMC), London, United Kingdom, 4–6 October 2016, 1425–1428, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMC.2016.7824621

LIBERTI- A new irradiation experiment design for in-pile tritium release and irradiation of Lithium ceramics and beryllium alloys in the High Flux Reactor Petten
Magielsen, L.; Jong, G. de; Boomstra, D.; Sciolla, C.; Fokkens, J.; Knitter, R.; Vladimirov, P.; Kolb, M.; Chakin, V.; Zmitko, M.
2016. The Nuclear Materials Conference (NuMat 2016), Montpellier, F, November 7-10, 2016

Enhanced jet stability for the melt-based production of lithium orthosilicate/metatitanate pebbles
Leys, O.; Waibel, P.; Matthes, J.; Knitter, R.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

Compatibility test between ceramic breeder and EUROFER steel for European HCPB-DEMO blanket design
Mukai, K.; Gonzelez, M.; Hernandez, T.; Knitter, R.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

Out-of-pile tritium adsorption/release behavior of advanced EU breeder pebbles
Kolb, M. H. H.; Rolli, R.; Knitter, R.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

Deuterium thermally induced desorption for candidate HCPB breeder compositions during electron irradiation at relevant temperatures
Gonzalez, M.; Malo, M.; Carella, E.; Morono, A.; Kolb, M. H. H.; Knitter, R.; Hodgson, E. R.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

Characterisation and radiolysis of modified lithium orthosilicate pebbles with noble metal impurities
Zarins, A.; Kizane, G.; Supe, A.; Valtenbergs, O.; Tamulevicius, S.; Andrulevicius, M.; Pajuste, E.; Rudovica, V.; Baumane, L.; Kolb, M. H. H.; Leys, O.; Knitter, R.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

The current status of the European ITER test blanket modules development
Zmitko, M.; Vallory, J.; Carin, Y.; Poitevin, Y.; Calvo Plaza, F. J.; Sadaba, S.; Gil, A.; Thomas, N.; Li Puma, A.; Forest, L.; Aiello, G.; Cogneau, L.; Rey, J.; Neuberger, H.; Vladimirov, P.; Chakin, V.; Knitter, R.; Aktaa, J.; Gaganidze, E.; Magielsen, L.; Fedorov, A.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

Effective thermal conductivity of advanced breeder pebble beds
Pupeschi, S.; Knitter, R.; Kamlah, M.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prag, Tschechien, 5.–9. September 2016

Inkjet printing of high κ-dielectric ceramic/polymer composite thick films
Mikolajek, M.; Binder, J. R.
2016. TechConnect Briefs 2016. Vol. 3: Advanced Manufacturing, Electronics and Microsystems. Ed. M. Laudon, 147–150, TechConnect

Inkjet printing of high κ-dielectric ceramic/polymer composite thick films
Mikolajek, M.; Binder, J. R.
2016. TechConnect World Innovation Conference and Expo, Washington, DC, May 22-25, 2016

Hairpin bandpass filter with tunable center frequency and tunable bandwidth based on screen printed ferroelectric varactors
Schuster, C.; Wiens, A.; Schüßler, M.; Kohler, C.; Binder, J.; Jakoby, R.
2016. 2016 11th European Microwave Integrated Circuits Conference (EuMIC), London, United Kingdom, 3–4 October 2016, 496–499, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMIC.2016.7777600

Interaction between laminate quality, drilling-induced delamination and mechanical properties in machining of carbon fibre reinforced plastic (CFRP) [Zusammenhänge zwischen der Laminatgüte, bohrungsinduzierten Delaminationen und den mechanischen Eigenschaften bei der Zerspanung von kohlenstofffaserverstärktem Kunststoff (CFK)]
Haeger, A.; Meinhard, D.; Lissek, F.; Kaufeld, M.; Hoffmann, M. J.; Schneider, G.; Knoblauch, V.
2016. Materialwissenschaft und Werkstofftechnik, 47 (11), 997–1014. doi:10.1002/mawe.201600626

Binderdetektion in Elektroden für Lithium-Ionen Batterien
Müller, M.; Bauer, W.; Pfaffmann, L.; Scheiba, F.; Jaiser, S.; Scharfer, P.
2016. 2.Sitzung des DKG-Fachausschusses ’Material- und Prozessdiagnostik’, Berlin, 3.November 2016

Average vs. local structure and composition-property phase diagram of K0.5Na0.5NbO3-Bi1/2Na1/2TiO3 system
Liu, L.; Knapp, M.; Ehrenberg, H.; Fang, L.; Fan, H.; Schmitt, L. A.; Fuess, H.; Hoelzel, M.; Dammak, H.; Thi, M. P.; Hinterstein, M.
2016. Journal of the European Ceramic Society, 37 (4), 1387–1399. doi:10.1016/j.jeurceramsoc.2016.11.024

Influence of the secondary phase LiTiOPO₄ on the properties of Li₁+ₓAlₓTi₂-x(PO₄)₃ (x=0; 0.3)
Hupfer, T.; Bucharsky, E. C.; Schell, K. G.; Hoffmann, M. J.
2016. Solid State Ionics, 302, 49–53. doi:10.1016/j.ssi.2016.10.008

Binderdetektion in Elektroden für Lithium-Ionen Batterien
Müller, M.; Pfaffmann, L.; Jaiser, S.; Baunach, M.; Scheiba, F.; Scharfer, P.; Bauer, W.
2016. Herbstsymposium des DKG-Fachausschusses Verfahrenstechnik, Erlangen, 30.November - 1.Dezember 2016

Der Verfestigungsmechanismus von Lithium-Ionen-Batterieelektroden während der Trocknung
Jaiser, S.; Müller, M.; Bauer, W.; Bhattacharjee, A.; Scharfer, P.; Schabel, W.
2016. Chemie - Ingenieur - Technik, 88 (9), 1269. doi:10.1002/cite.201650435

Steerable Dielectric Resonator Phased-Array Antenna Based on Inkjet-Printed Tunable Phase Shifter with BST Metal-Insulator-Metal Varactors
Nikfalazar, M.; Mehmood, A.; Sohrabi, M.; Mikolajek, M.; Wiens, A.; Maune, H.; Kohler, C.; Binder, J. R.; Jakoby, R.
2016. IEEE antennas and wireless propagation letters, 15, 877–880. doi:10.1109/LAWP.2015.2478959

Effect of calcination conditions on lithium conductivity in Li1.3Ti1.7Al0.3(PO4)3 prepared by sol-gel route
Schell, K. G.; Bucharsky, E. C.; Lemke, F.; Hoffmann, M. J.
2016. Ionics, 1–7. doi:10.1007/s11581-016-1883-y

Lithium Diffusion Pathway in Li1.3Al0.3Ti1.7(PO4)3 (LATP) Superionic Conductor
Monchak, M.; Hupfer, T.; Senyshyn, A.; Boysen, H.; Chernyshov, D.; Hansen, T.; Schell, K. G.; Bucharsky, E. C.; Hoffmann, M. J.; Ehrenberg, H.
2016. Inorganic chemistry, 55 (6), 2941–2945. doi:10.1021/acs.inorgchem.5b02821

Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering
Hilger, I.; Boulnat, X.; Hoffmann, J.; Testani, C.; Bergner, F.; De Carlan, Y.; Ferraro, F.; Ulbricht, A.
2016. Journal of nuclear materials, 472, 206–214. doi:10.1016/j.jnucmat.2015.09.036

Kohlenstoffbasierte Faser-Elektroden für Vanadium Redoxflow Batterien: Einfluss der Oberflächenbeschaffenheit von PAN-basierten Faserelektroden im Fokus von Graphitierungsgrad, Sauerstoffanteil und 3D-Struktur auf das elektrochemische Verhalten. Dissertation
Langner, J.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000062476

Influence of Laser Welding Speed on the Morphology and Phases Occurring in Spray-Compacted Hypereutectic Al-Si-Alloys
Gietzelt, T.; Wunsch, T.; Messerschmidt, F.; Geßwein, H.; Gerhards, U.
2016. Metals, 6 (12), 295. doi:10.3390/met6120295

Development and qualification of ceramic breeder materials for the EU HCPB test blanket module: Strategy and R&D achievements
Zmitko, M.; Poitevin, Y.; Knitter, R.; Goraieb, A.; Magielsen, L.; Fedorov, A.
2016. Proceedings of the 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015, 240–253, National Fusion Research Institute

The deuterium release behaviour in gamma ray-irradiated candidate breeder ceramics
Carella, E.; Morono, A.; Gonzalez, M.; Kolb, M. H. H.; Knitter, R.
2016. Proceedings of the 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015, 105–115, National Fusion Research Institute

Li₄SiO₄ based breeder ceramics with Li₂TiO₃ and other strengthening phase additions
Kolb, M. H. H.; Mukai, K.; Knitter, R.; Hoshino, T.
2016. Proceedings of the 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015, 54–62, National Fusion Research Institute

Multiple recycling study of advanced breeder pebbles by melt process
Mukai, K.; Leys, O.; Pereslavtsev, P.; Knitter, R.
2016. Proceedings of the 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015, 1–18, National Fusion Research Institute

Precursor derived SiOC/MoSi2-composites for diesel glow plugs: Preparation and high temperature properties
Reitz, E.; Schell, K. G.; Bucharsky, E. C.; Oberacker, R.; Hoffmann, M. J.
2016. Journal of the Ceramic Society of Japan, 124 (10), 1017–1022. doi:10.2109/jcersj2.16108

Finite Element Study on Crack Terminating Angles
Rizzi, G.; Schell, G.; Fett, T.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000061808

Elektrospinning von Kathodenmaterialien für Lithium Ionen Batterien. Dissertation
Bachtin, K.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000060839

Numerical and experimental characterization of ceramic pebble beds under cycling mechanical loading
Pupeschi, S.; Knitter, R.; Kamlah, M.; Gan, Y.
2016. Fusion engineering and design, 112, 162–168. doi:10.1016/j.fusengdes.2016.08.021

Production of tritium breeding pebbles at KIT
Leys, O.; Knitter, R.
2016. BeYOND VII - Industrial Forum, Berlin, September 1-2, 2016

Piezoelectricity and rotostriction through polar and non-polar coupled instabilities in bismuth-based piezoceramics
Acosta, M.; Schmitt, L. A.; Cazorla, C.; Studer, A.; Zintler, A.; Glaum, J.; Kleebe, H.-J.; Donner, W.; Hoffman, M.; Rödel, J.; Hinterstein, M.
2016. Scientific reports, 6, 28742. doi:10.1038/srep28742

Interaction of Materials during Aqueous Processing of Electrodes for Lithium Ion Batteries
Bauer, W.
2016. EMN Meeting on Power Sources, Kuta, RI, August 2-6, 2016

Thermal properties and ionic conductivity of Li1,3Ti1,7Al0,3(PO4)3 solid electrolytes sintered by field-assisted sintering
Bucharsky, E. C.; Schell, K. G.; Hupfer, T.; Hoffmann, M. J.; Rohde, M.; Seifert, H. J.
2016. Ionics, 22 (7), 1043–1049. doi:10.1007/s11581-015-1628-3

Structure and dielectric dispersion in cubic-like 0.5K0.5Na0.5NbO3-0.5Na1/2Bi1/2TiO3 ceramic
Liu, L.; Knapp, M.; Schmitt, L. A.; Ehrenberg, H.; Fang, L.; Fuess, H.; Hoelzel, M.; Hinterstein, M.
2016. epl, 114 (4), 47011. doi:10.1209/0295-5075/114/47011

Variations in structure and electrochemistry of iron- and titanium-doped lithium nickel manganese oxyfluoride spinels
Hoeweling, A.; Stenzel, D.; Gesswein, H.; Kaus, M.; Indris, S.; Bergfeldt, T.; Binder, J. R.
2016. Journal of power sources, 315, 269–276. doi:10.1016/j.jpowsour.2016.03.023

Investigation of film solidification and binder migration during drying of Li-Ion battery anodes
Jaiser, S.; Müller, M.; Baunach, M.; Bauer, W.; Scharfer, P.; Schabel, W.
2016. Journal of Power Sources, 318, 210–219. doi:10.1016/j.jpowsour.2016.04.018

Stress-Enhanced Swelling of Silica: Effect on Strength
Wiederhorn, S. M.; Rizzi, G.; Wagner, S.; Hoffmann, M. J.; Fett, T.
2016. Journal of the American Ceramic Society, 99 (9), 2956–2963. doi:10.1111/jace.14300

Neue Ansätze zur Charakterisierung von Graphitanoden für Lithium-Ionen Batterien
Müller, M.; Bauer, W.; Pfaffmann, L.; Scheiba, F.; Baunach, M.; Jaiser, S.; Scharfer, P.
2016. Frühjahrstagung 2016 des Arbeitskreises Kohlenstoff (AKK Kohlenstoff), Meitingen, 25.-26. April 2016

Effects of strain-induced martensite and its reversion on the magnetic properties of AISI 201 austenitic stainless steel
Filho, I. R. S.; Sandim, M. J. R.; Cohen, R.; Nagamine, L. C. C. M.; Hoffmann, J.; Bolmaro, R. E.; Sandim, H. R. Z.
2016. Journal of magnetism and magnetic materials, 419, 156–165. doi:10.1016/j.jmmm.2016.06.027

Increasing the field of view in grating based X-ray phase contrast imaging using stitched gratings
Meiser, J.; Willner, M.; Schröter, T.; Hofmann, A.; Rieger, J.; Koch, F.; Birnbacher, L.; Schüttler, M.; Kunka, D.; Meyer, P.; Faisal, A.; Amberger, M.; Duttenhofer, T.; Weber, T.; Hipp, A.; Ehn, S.; Walter, M.; Herzen, J.; Schulz, J.; Pfeiffer, F.; Mohr, J.
2016. Journal of X-Ray Science and Technology, 24 (3), 379–388. doi:10.3233/XST-160552

Liquid Glass: A Facile Soft Replication Method for Structuring Glass
Kotz, F.; Plewa, K.; Bauer, W.; Schneider, N.; Keller, N.; Nargang, T.; Helmer, D.; Sachsenheimer, K.; Schäfer, M.; Worgull, M.; Greiner, C.; Richter, C.; Rapp, B.
2016. Advanced materials, 28 (23), 4646–4650. doi:10.1002/adma.201506089

Evolution of microstructure and its relation to ionic conductivity in Li1 + xAlxTi2 − x(PO4)3
Hupfer, T.; Bucharsky, E. C.; Schella, K. G.; Senyshyn, A.; Monchak, M.; Hoffmann, M. J.; Ehrenberg, H.
2016. Solid State Ionics / Special Issue, 288, 235–239. doi:10.1016/j.ssi.2016.01.036

Grain growth in perovskites: What is the impact of boundary transitions?
Rheinheimer, W.; Hoffmann, M. J.
2016. Current Opinion in Solid State and Materials Science. doi:10.1016/j.cossms.2016.04.004

Grain growth in weak electric fields in strontium titanate: Graingrowth acceleration by defect redistribution
Rheinheimer, W.; Fülling, M.; Hoffmann, M. J.
2016. Journal of the European Ceramic Society, 36, 2773–2780. doi:10.1016/j.jeurceramsoc.2016.04.033

Neutron diffraction study of (KₓNa₁₋ₓ)NbO₃-based ceramics from low and high temperatures
Mgbemere, H.; Schneider, G.; Hoelzel, M.; Hinterstein, M.
2016. Journal of applied crystallography, 49, 891–901. doi:10.1107/S1600576716005197

Stress-modulated relaxor-to-ferroelectric transition in lead-free (N a1/2 B i1/2)Ti O₃-BaTi O₃ ferroelectrics
Schader, F. H.; Wang, Z.; Hinterstein, M.; Daniels, J. E.; Webber, K. G.
2016. Physical Review B - Condensed Matter and Materials Physics, 93 (13), 134111. doi:10.1103/PhysRevB.93.134111

A sample cell for in situ electric-field-dependent structural characterization and macroscopic strain measurements
Hossain, M. J.; Wang, L.; Wang, Z.; Khansur, N. H.; Hinterstein, M.; Kimpton, J. A.; Daniels, J. E.
2016. Journal of Synchrotron Radiation, 23 (3), 694–699. doi:10.1107/S1600577516005075

The reprocessing of advanced mixed lithium orthosilicate/metatitanate tritium breeder pebbles
Leys, O.; Bergfeldt, T.; Kolb, M. H. H.; Knitter, R.; Goraieb, A. A.
2016. Fusion Engineering and Design, 107, 70–74. doi:10.1016/j.fusengdes.2016.04.025

Untersuchung des Sinterverhaltens von SrTiO₃ unter Berücksichtigung der Defektchemie. Dissertation
Lemke, F.
2016. KIT Scientific Publishing. doi:10.5445/KSP/1000054013

The phase diagram of K0.5Na0.5O3-Bi1/2Na1/2TiO3
Liu, L.; Knapp, M.; Ehrenberg, H.; Fang, L.; Schmidt, L. A.; Fuess, H.; Hoelzel, M.; Hinterstein, M.
2016. Journal of Applied Crystallography, 49, 574–584. doi:10.1107/S1600576716002909

Influence of noble metal impureties on radiolysis of modified lithium orthosilicate pebbles
Zarins, A.; Kizane, G.; Supe, A.; Baumane, L.; Valtenbergs, O.; Knitter, R.; Leys, O.
2016. 32nd Scientific Conference of the Institut of Solid State Physics, University of Latvia, Riga, LV, February 17-19, 2016

Phase-field study of pore-grain boundary interaction
Hötzer, J.; Rehn, V.; Rheinheimer, W.; Hoffmann, M. J.; Nestler, B.
2016. Journal of the Ceramic Society of Japan, 124 (4), 329–339. doi:10.2109/jcersj2.15266

Sintering and grain growth in SrTiO3: impact of defects on kinetics
Lemke, F.; Rheinheimer, W.; Hoffmann, M. J.
2016. Journal of the Ceramic Society of Japan, 124 (4), 346–353. doi:10.2109/jcersj2.15265

Beam steering phased array antenna with fully printed phase shifters based on low-temperature sintered BST-composite thick films
Nikfalazar, M.; Kohler, C.; Wiens, A.; Mehmood, A.; Sohrabi, M.; Maune, H.; Binder, J. R.; Jakoby, R.
2016. IEEE Microwave and Wireless Components Letters, 26 (1), 70–72. doi:10.1109/LMWC.2015.2505633

Formation and accumulation of radiation-induced defects and radiolysis products in modified lithium orthosilicate pebbles with additions of titanium dioxide
Zarins, A.; Valtenbergs, O.; Kizane, G.; Supe, A.; Knitter, R.; Kolb, M. H. H.; Leys, O.; Baumane, L.; Conka, D.
2016. Journal of Nuclear Materials, 470, 187–196. doi:10.1016/j.jnucmat.2015.12.027

Grain growth transitions of perovskite ceramics and their relationship to abnormal grain growth and bimodal microstructures
Rheinheimer, W.; Hoffmann, M. J.
2016. Journal of Materials Science, 51 (4), 1756–1765. doi:10.1007/s10853-015-9535-6

Tunable in-package impedance matching for high power transistors based on printed ceramics
Wiens, A.; Preis, S.; Kohler, C.; Kienemund, D.; Maune, H.; Bengtsson, O.; Nikfalazar, M.; Binder, J. R.; Heinrich, W.; Jakoby, R.
2015. European Microwave Conference (EuMC 2015), Paris, F, September 7-10, 2015, 1236–1239, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMC.2015.7345993

Tunable in-package impedance matching for high power transistors based on printed ceramics
Wiens, A.; Preis, S.; Kohler, C.; Kienemund, D.; Maune, H.; Bengtsson, O.; Nikfalazar, M.; Binder, J. R.; Heinrich, W.; Jakoby, R.
2015. 10th European Microwave Integrated Circuits Conference (EuMIC), Paris, F, September 7-8, 2015, 385–388, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMIC.2015.7345150

Low bias voltage tunable phase shifter based on inkjet-printed BST MIM varactors for C/X-band phased arrays
Nikfalazar, M.; Mehmood, A.; Sohrabi, M.; Wiens, A.; Zheng, Y.; Maune, H.; Jakoby, R.; Mikolajek, M.; Friederich, A.; Kohler, C.; Binder, J. R.
2015. European Microwave Conference (EuMC 2015), Paris, F, September 7-10, 2015, 1264–1267, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMC.2015.7346000

Frequency extension of the fully printed phase shifter by paste composite optimization
Nikfalazar, M.; Kohler, C.; Kienemund, D.; Wiens, A.; Zheng, Y.; Sohrabi, M.; Binder, J. R.; Jakoby, R.
2015. German Microwave Conference (GeMiC), Nürmberg, March 16-18, 2015, 146–149, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/GEMIC.2015.7107774

Low bias voltage tunable phase shifter based on inkjet-printed BST MIM varactors for C/X-band phased arrays
Nikfalazar, M.; Mehmood, A.; Sohrabi, M.; Wiens, A.; Zheng, Y.; Maune, H.; Jakoby, R.; Mikolajek, M.; Friederich, A.; Kohler, C.; Binder, J. R.
2015. 10th European Microwave Integrated Circuits Conference (EuMIC), Paris, F, September 7–8, 2015, 413–416, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMIC.2015.7345157

Temperature dependence of a tunable phase shifter based on inkjet printing technology
Kienemund, D.; Nikfalazar, M.; Kohlery, C.; Friederichy, A.; Wiens, A.; Maune, H.; Mikolajeky, M.; Bindery, J. R.; Jakoby, R.
2015. German Microwave Conference (GeMiC), Nürmberg, March 16-18, 2015, 150–153, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/GEMIC.2015.7107775

Intergranular nanostructure effects on strength and toughness of Si₃N₄
Mikijelj, B.; Nawaz, Z.; Kruzic, J. J.; Idrobo, J.; Swab, J. J.; Özcoban, H.; Jelitto, H.; Schneider, G. A.; Fett, T.; Liu, Y.
2015. Journal of the American Ceramic Society, 98 (5), 1650–1657. doi:10.1111/jace.13484

Viscosity measurements of crystallizing andesite from Tungurahua volcano (Ecuador)
Oryaelle Chevrel, M.; Cimarelli, C.; deBiasi, L.; Hanson, J. B.; Lavallee, Y.; Arzilli, F.; Dingwell, D. B.
2015. Geochemistry, Geophysics, Geosystems, 16 (3), 870–889. doi:10.1002/2014GC005661

Funktioneller Tintenstrahldruck keramischer Dickschichten: Druckprozess und Suspensionsanforderungen
Mikolajek, M.; Friederich, A.; Bauer, W.; Binder, J. R.
2015. Kriegesmann, J. [Hrsg.] Technische Keramische Werkstoffe 148.Ergänzungslieferung - Keramische Werkstoffe - September 2015 Kapitel 3.8.4.2 Köln : Deutscher Wirtschaftsdienst (Loseblattsammlung)

Activation calculations for multiple recycling of breeder ceramics based on a melt process
Mukai, K.; Pereslavtsev, P.; Fischer, U.; Knitter, R.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015

LTCC phase shifters based on tunable ferroelectric composite thick films
Nikfalazar, M.; Kohler, C.; Heunisch, A.; Wiens, A.; Zheng, Y.; Schulz, B.; Mikolajek, M.; Schrabi, M.; Rabe, T.; Binder, J. R.; Jakoby, R.
2015. Frequenz, 69 (11-12), 451–455. doi:10.1515/freq-2015-0082

Volume expansion caused by water penetration into silica glass
Wiederhorn, S. M.; Yi, F.; LaVan, D.; Richter, L. J.; Fett, T.; Hoffmann, M. J.
2015. Journal of the American Ceramic Society, 98 (1), 78–87. doi:10.1111/jace.13264

The impact of heat treatment on the domain configuration and strain behavior in Pb[Zr,Ti]₃ ferroelectrics
Schmitt, L. A.; Kungl, H.; Hinterstein, M.; Riekehr, L.; Kleebe, H.-J.; Hoffmann, M. J.; Eichel, R.-A.; Fuess, H.
2015. Journal of the American Ceramic Society, 98 (1), 269–277. doi:10.1111/jace.13253

Preparation and characterization of sol-gel derived high lithium ion conductive NZP-type ceramics Li₁₊ₓ AlₓTi₂₋ₓ(PO₄)₃
Bucharsky, E. C.; Schell, K. G.; Hintennach, A.; Hoffmann, M. J.
2015. Solid State Ionics, 274, 77–82. doi:10.1016/j.ssi.2015.03.009

Anti-thermal behavior of materials
Cantwell, P. R.; Holm, E. A.; Harmer, M. P.; Hoffmann, M. J.
2015. Scripta materialia, 103, 5 S. doi:10.1016/j.scriptamat.2015.02.011

Mechanisms of aging and fatigue in ferroelectrics
Genenko, Y. A.; Glaum, J.; Hoffmann, M. J.; Albe, K.
2015. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 192 (SI), 52–82. doi:10.1016/j.mseb.2014.10.003

Electrochemical characterization of monoclinic and orthorhombic Li₃CrF₆ as positive electrodes in lithium-ion batteries synthesized by a sol-gel process with environmentally benign chemicals
Lieser, G.; Winkler, V.; Gesswein, H.; Biasi, L. de; Glatthaar, S.; Hoffmann, M. J.; Ehrenberg, H.; Binder, J. R.
2015. Journal of power sources, 294, 444–451. doi:10.1016/j.jpowsour.2015.06.036

Inactive electrode materials and slurry preparation
Bauer, W.
2015. Dresden Battery Days 2015, Dresden, September 22-24, 2015

A reversible wetting transition in strontium titanate and its influence on grain growth and the grain boundary mobility
Rheinheimer, W.; Bäurer, M.; Hoffmann, M. J.
2015. Acta Materialia, 101, 80–89. doi:10.1016/j.actamat.2015.08.069

The mechanism of grain boundary motion in SrTiO3
Sternlicht, H.; Rheinheimer, W.; Hoffmann, M. J.; Kaplan, W. D.
2015. Journal of Material Science, 51 (1), 467–475. doi:10.1007/s10853-015-9058-1

Non-Arrhenius behavior of grain growth in strontium titanate: New evidence for a structural transition of grain boundaries
Rheinheimer, W.; Hoffmann, M. J.
2015. Scripta Materialia, 101, 68–71. doi:10.1016/j.scriptamat.2015.01.021

Growth of single crystalline seeds into polycrystalline strontium titanate: Anisotropy of the mobility, intrinsic drag effects and kinetic shape of grain boundaries
Rheinheimer, W.; Bäurer, W.; Handwerker, C. A.; Blendell, J. E.; Hoffmann, M. J.
2015. Acta Materialia, 95, 111–123. doi:10.1016/j.actamat.2015.05.019

The equilibrium crystal shape of strontium titanate and its relationship to the grain boundary plane distribution
Rheinheimer, W.; Bäurer, M.; Chien, H.; Rohrer, G. S.; Handwerker, C. A.; Blendell, J. E.; Hoffmann, M. J.
2015. Acta Materialia, 82, 32–40. doi:10.1016/j.actamat.2014.08.065

Li vaporization property of two-phase material of Li₂TiO₃ and Li₂SiO₃ for tritium breeder
Ogawa, S.; Masuko, Y.; Kato, H.; Yuyama, H.; Sakai, Y.; Niwa, E.; Hashimoto, T.; Mukai, K.; Hosino, T.; Sasaki, K.
2015. Fusion engineering and design, 98-99, 1859–1863. doi:10.1016/j.fusengdes.2015.01.042

Challenges in lithium-ion-battery slurry preparation and potential of modifying electrode structures by different mixing processes,
Wenzel, V.; Nirschl, H.; Nötzel, D.
2015. Energy, 3 (7), 692–698. doi:10.1002/ente.201402218

Thermo-mechanical screening tests to qualify beryllium pebble beds with non-spherical pebbles
Reimann, J.; Fretz, B.; Pupeschi, S.
2015. Fusion engineering and design, 98-99, 1851–1854. doi:10.1016/j.fusengdes.2015.04.046

Development and qualification of ceramic breeder materials for the EU HCPB test blanket module: Strategy and R&D achievements
Zmitko, M.; Poitevin, Y.; Knitter, R.; Goraieb, A.; Magielsen, L.; Fedorov, A.
2015. 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015

Physicochemical processes in modified Li₄SiO₄ pebbles under action of accelerated electron irradiation
Zarins, A.; Avotina, L.; Valtenbergs, O.; Kizane, G.; Supe, A.; Knitter, R.; Baumane, L.
2015. Functional Materials and Nanotechnologies (FM&NT 2015), Vilnius, LT, October 5-8, 2015

Investigation of the oxidative stability of Li-ion battery electrolytes using cathode materials
Hofmann, A.; Werth, F.; Höweling, A.; Hanemann, T.
2015. ECS electrochemistry letters, 4 (12), A141-A144. doi:10.1149/2.0071512eel

Deuterium trapping and release processes occuring in γ-irradiated solid breeder blanket materials
Carella, E.; Saavedra, R.; Morono, A.; Knitter, R.; Gonzalez, M.
2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015

Multiple recycling study of advanced breeder pebbles by melt process
Mukai, K.; Leys, O.; Pereslavtsev, P.; Knitter, R.
2015. 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015

Li₄SiO₄ based breeder ceramics with Li₂TiO₃ and other strengthening phase additions
Kolb, M. H. H.; Mukai, K.; Knitter, R.; Hoshino, T.
2015. 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015

Development tests for lithium-ion cell characterization using realistic load profiles
Sattler, J.; Glatthaar, S.; Bauder, A.; Wagner, N.; Bohn, N.; Binder, J. R.
2015. 7.Internationalen Fachtagung ’Kraftwerk Batterie - Lösungen für Automobil und Energieversorgung’, Aachen, 27.-29.April 2015

Ionenätzen - eine ideale Präparationstechnik zur Charakterisierung des Elektrodenaufbaus in Lithium-Ionen Batterien
Müller, M.
2015. Keramische Zeitschrift, 67, 298–301

Thermally induced outdiffusion studies of deuterium in ceramic breeder blanket materials after irradiation
Gonzalez, M.; Carella, E.; Morono, A.; Kolb, M. H. H.; Knitter, R.
2015. Fusion engineering and design, 98-99, 1771–1774. doi:10.1016/j.fusengdes.2015.03.027

Keramische Suspensionen für den funktionalen Tintenstrahldruck
Binder, J. R.; Mikolajek, M.; Friederich, A.; Bauer, W.
2015. Werkstoffwoche, Dresden, 14.-17. September 2015

A simple approach to realize homogeneous ceramic thick films by inkjet printing
Binder, J. R.; Mikolajek, M.; Friederich, A.; Bauer, W.
2015. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2015), Warszawa, PL, September 20-24, 2015

The deuterium release behaviour in gamma ray-irradiated candidate breeder ceramics
Carella, E.; Morono, A.; Gonzalez, M.; Kolb, M. H. H.; Knitter, R.
2015. 18th International Workshop of Ceramic Breeder Blanket Interactions (CBBI-18), Jeju, Korea, September 10-12, 2015

Stability of advanced breeder pebbles in water containing purge gas atmosphere
Kolb, M. H. H.; Knitter, R.; Hoshino, T.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015

Identification of mechanical parameters of advanced ceramic pebble beds using DEM
Pupeschi, S.; Knitter, R.; Kamlah, M.; Gan, Y.
2015. Australasian Conference on Computational Mechanics (ACCM), Brisbane, AUS, November 30 - December 1, 2015

Li₄SiO₄ based breeder ceramics with Li₂TiO₃, LiAlO₂ and LiₓLasub(y)TiO₃ additions
Kolb, M. H. H.; Mukai, K.; Knitter, R.; Hoshino, T.
2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015

Determination of the optimum lithium metatitanate content for advanced lithium orthosilicate breeder pebbles
Leys, O.; Mukai, K.; Kolb, M.; Knitter, R.
2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015

Tintenstrahldruck dielektrischer Keramik/Polymer-Kompositdickschichten für flexible Anwendungen
Mikolajek, M.; Binder, J. R.
2015. Keramische Zeitschrift, 67 (5), 296–297

Interaction of high flash point electrolytes and PE-based separators for Li-ion batteries
Hofmann, A.; Kaufmann, C.; Müller, M.; Hanemann, T.
2015. International Journal of Molecular Sciences, 16 (9), 20258–20276. doi:10.3390/ijms160920258

Activation calculations for multiple recycling of breeder ceramics by melt processing
Mukai, K.; Pereslavtsev, P.; Fischer, U.; Knitter, R.
2015. Fusion engineering and design, 100, 565–570. doi:10.1016/j.fusengdes.2015.08.007

Direct inkjet printing of dielectric ceramic/polymer composite thick films
Mikolajek, M.; Friederich, A.; Kohler, C.; Rosen, M.; Rathjen, A.; Krüger, K.; Binder, J. R.
2015. Advanced engineering materials, 17 (9), 1294–1301. doi:10.1002/adem.201400451

Novel fabrication methods for ferroelectric-dielectric composite ceramics and their potential of tailoring the microwave dielectric properties
Kohler, C.; Wiens, A.; Xu, J.; Kubina, B.; Nikfalazar, M.; Jakoby, R.; Binder, J. R.
2015. 1th International Conference of Pacific Rim Ceramic Societies (PacRim-11), Jeju, Korea, August 30 - September 4, 2015

Unravelling the mechanism of lithium insertion into and extraction from trirutile-type LiNiFeF₆ cathode material for Li-ion batteries
Biasi, L. de; Lieser, G.; Rana, J.; Indris, S.; Dräger, C.; Glatthaar, S.; Mönig, R.; Ehrenberg, H.; Schumacher, G.; Binder, J. R.; Geßwein, H.
2015. CrystEngComm, 17 (32), 6163–6174. doi:10.1039/C5CE00989H

Herstellung von Keramik/Polymer Komposit-Dickschichten mittels Tintenstrahldruck
Mikolajek, M.; Binder, J. R.
2015. 20.Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, A, 1.-3.Juli 2015

Fabrication of dielectric ceramic/polymer thick films via inkjet printing for flexible applications
Mikolajek, M.; Rathjen, A.; Krüger, K.; Binder, J. R.
2015. 90. DKG Jahrestagung & Symposium Hochleistungskeramik 2015, Bayreuth, 15.- 19.März 2015

Tunable phase shifter based on inkjet-printed ferroelectric MIM varactors
Nikfalazar, M.; Wiens, A.; Mikolajek, M.; Friederich, A.; Kohler, C.; Sohrabi, M.; Zheng, Y.; Kienemund, D.; Melnyk, S.; Binder, J. R.; Jakoby, R.
2015. Frequenz, 69 (1-2), 39–46. doi:10.1515/freq-2014-0120

Requirements to ceramic suspensions for inkjet printing
Mikolajek, M.; Friederich, A.; Bauer, W.; Binder, J. R.
2015. Ceramic Forum International - Berichte der Deutschen Keramischen Gesellschaft, 92 (3), E1-E5

The Reprocessing and Activation of Advanced Tritium Breeder Pebbles
Leys, O.; Mukai, K.; Knitter, R.; Pereslavtsev, P.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Deutschland, 20.–22. Mai 2015

Factors affecting Capacity Retention in Hybrid Lithium-Sulfur Battery. Dissertation
Kasemchainan, J.
2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000048536

Untersuchungen zur SEI-Bildung und Optimierung der Formation an Lithium-Ionen Voll- und Halbzellen. Dissertation
German, F.
2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000048037

Identification of morphology-critical stages during drying of particulate electrode slurries
Jaiser, S.; Müller, M.; Baunach, M.; Bauer, W.; Scharfer, P.; Schabel, W.
2015. 7.Internationalen Fachtagung ’Kraftwerk Batterie - Lösungen für Automobil und Energieversorgung’, Aachen, 27.-29.April 2015

The reprocessing and activation of advanced tritium breeder pebbles
Leys, O.; Mukai, K.; Knitter, R.; Pereslavtsev, P.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Deutschland, 20.–22. Mai 2015

Synthese und Charakterisierung von Lithiummetallfluoriden als positive Elektrodenmaterialien für Lithiumionenbatterien. Dissertation
Lieser, G.
2015. Karlsruher Institut für Technologie (KIT)

Charakterisierung der Elektrodenstruktur von Lithium-Ionen Batterien mittels Ionenätzen
Müller, M.; Cetinel, F. A.; Nötzel, D.; Brösicke, C.; Bauer, W.
2015. 90. DKG Jahrestagung & Symposium Hochleistungskeramik 2015, Bayreuth, 15.- 19.März 2015

Temperature dependence of a tunable phase shifter based on inkjet printing technology
Kienemund, D.; Nikfalazar, M.; Kohler, C.; Friederich, A.; Wiens, A.; Maune, H.; Mikolajek, M.; Binder, J. R.; Jakoby, R.
2015. German Microwave Conference (GeMic 2015), Nürnberg, March 16-18, 2015

Frequency extension of the fully printed hase shifter by paste composite optimization
Nikfalazar, M.; Kohler, C.; Kienemund, D.; Wiens, A.; Zheng, Y.; Sohrabi, M.; Binder, J. R.; Jakoby, R.
2015. German Microwave Conference (GeMic 2015), Nürnberg, March 16-18, 2015

Stability of pastes for the manufacturing of lithium ion batteries
Bauer, W.; Brösicke, C.; Cetinel, F.; Müller, M.; Nötzel, D.
2015. 90. DKG Jahrestagung & Symposium Hochleistungskeramik 2015, Bayreuth, 15.- 19.März 2015

Inkjet printing of functional ceramics
Binder, J. R.; Friederich, F.; Mikolajek, M.; Bauer, W.
2015. 90. DKG Jahrestagung & Symposium Hochleistungskeramik 2015, Bayreuth, 15.- 19.März 2015

Inkjet-Printed Metal-Insulator-Metal Capacitors for Tunable Microwave Applications
Friederich, A.; Kohler, C.; Nikfalazar, M.; Wiens, A.; Jakoby, R.; Bauer, W.; Binder, J. R.
2015. International Journal of Applied Ceramic Technology, 12 (Issue S1), E164-E173. doi:10.1111/ijac.12362

Sol-gel processing and electrochemical conversion of inverse spinel-type Li₂NiF₄
Lieser, G.; Biasi, L. de; SCheuermann, M.; Winkler, V.; Eisenhardt, S.; Glatthaar, S.; Indris, S.; Geßwein, H.; Hoffmann, M. J.; Ehrenberg, H.; Binder, J. R.
2015. Journal of the Electrochemical Society, 162, A679-A686. doi:10.1149/2.0591504jes

Rapid prototyping of glass microfluidic chips
Kotz, F.; Plewa, K.; Bauer, W.; Hanemann, T.; Waldbaur, A.; Wilhelm, E.; Neumann, C.; Rapp, B. E.
2015. SPIE Photonics West, San Francisco, Calif., February 7-12, 2015

Fabrication and potential of tunable Ba₀̣₆Sr₀̣₄TiO₃ - Mg₃B₂O₆ composites for microwave applications
Kohler, C.; Kubina, B.; Wiens, A.; Ju, X.; Jakoby, R.; Binder, J. R.
2015. 90. DKG Jahrestagung & Symposium Hochleistungskeramik 2015, Bayreuth, 15.-19.März 2015

Rapid prototyping of glass microfluidic chips
Kotz, F.; Plewa, K.; Bauer, W.; Hanemann, T.; Waldbaur, A.; Wilhelm, E.; Neumann, C.; Rapp, B. E.
2015. Microfluidics, BioMEMS and Medical Microsystems XIII : Proceedings of SPIE Photonics West, San Francisco, Calif., February 7-12, 2015. Ed.: B. M. Gray, Paper 932003, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2076964

Fully screen-printed tunable microwave components based on optimized barium strontium titanate thick films
Kohler, C.; Friederich, A.; Nikfalazar, M.; Wiens, A.; Sazegar, M.; Jakoby, R.; Binder, J. R.
2015. International Journal of Applied Ceramic Technology, 12 (S1), E96-E105. doi:10.1111/ijac.12276

Direct synthesis of trirutile-type LiMgFeF₆ and its electrochemical characterization as positive electrode in lithium-ion batteries
Lieser, G.; Dräger, C.; Biasi, L. de; Indris, S.; Geßwein, H.; Glatthaar, S.; Hoffmann, M. J.; Ehrenberg, H.; Binder, J. R.
2015. Journal of power sources, 274, 1200–1207. doi:10.1016/j.jpowsour.2014.10.151

Evidence of loss of active lithium in titanium-doped LiNi₀̣₅Mn₁̣₅O₄/graphite cells
Höweling, A.; Glatthaar, S.; Nötzel, D.; Binder, J. R.
2015. Journal of power sources, 274, 1267–1275. doi:10.1016/j.jpowsour.2014.10.199

Solution based synthesis of mixed-phase materials in the Li₂TiO₃-Li₄SiO₄ system
Hanaor, D. A. H.; Kolb, M. H. H.; Gan, Y.; Kamlah, M.; Knitter, R.
2015. Journal of nuclear materials, 456, 151–161. doi:10.1016/j.jnucmat.2014.09.028

Tunable impedance matching networks on printed ceramics for output matching of RF-power transistors
Wiens, A.; Bengtsson, O.; Kohler, C.; Kienemund, D.; Nikfalazar, M.; Maune, H.; Friederich, A.; Binder, J. R.; Heinrich, W.; Jakoby, R.
2014. 44th European Microwave Conference (EuMC), Rome, I, October 6-9, 2014, 496–499, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EuMC.2014.6986479

Interface orientation distribution during grain growth in bulk SrTiO 3 measured by means of 3D X-ray diffraction contrast tomography
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E. M.; Ludwig, W.; Weygand, D.; Gumbsch, P.
2012. Three-dimensional tomography of materials : November 28 - December 3, 2011, Boston, Massachusetts, USA ; [Symposium PP, Three-Dimensional Tomography of Materials ; held at 2011 MRS fall meeting]. Ed.: C. Larabell, 58–62, Cambridge University Press (CUP). doi:10.1557/opl.2012.831

Tunable dielectrics for microwave applications
Giere, A.; Zheng, Y.; Maune, H.; Sazegar, M.; Paul, F.; Zhou, X.; Binder, J. R.; Muller, S.; Jakoby, R.
2008. 17th IEEE International Symposium on the Applications of Ferroelectrics (ISAF), Santa Re, NM, February 23-28, 2008, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ISAF.2008.4693753