Student Projects and Thesis
The IAM-KWT group reinforces that all team members must present research integrity and good research practices. Further information and guidelines regarding scientific work and writing are listed below.
KIT oiffers a course on "Good Scientific Practice". In this online course students learn which rules and standards of the scientific system are already relevant during their studies and how research is conducted accordingly to good scientific practice. In addition, KIT provides courses on literature search and reference management "Literature Research Skills" as well as academic writing "Writing and Text Competence".
Former Theses
|
Effect of Different Concentrations of dopant elements on the PTC properties of barium titanate and bismuth sodium titanate |
Master Thesis |
2025 |
|
Anodic nanostructured TiO₂ coatings as immobilized photocatalysts for the removal of 4-chlorophenol via heterogeneous photocatalysis |
Bachelor Thesis |
2025 |
|
High-throughput synthesis of organic nanoparticle dispersions for the manufacture of organic solar cells |
Master Thesis |
2025 |
|
Scaling of squeegee processes for the fabrication organic solar cells |
Master Thesis |
2025 |
|
Fabrication and Characterization of niobium-A2O3 composites via SPS for High-Temperature Applications |
Bachelor Thesis |
2025 |
|
Fabrication and Characterization of Ta-Al₂O₃ composites |
Bachelor Thesis |
2024 |
|
Fabrication and Characterization of Nb-Al₂O₃ composites |
Bachelor Thesis |
2024 |
|
Synthesis and Characterization of an Oxynitride for Use in Ceramic Solar Cells |
Bachelor Thesis |
2024 |
|
Process Optimization of Lead-Free PTC Ceramics based on BT-BNT |
Master Thesis |
2024 |
|
Microstructural Development of Sintered AgCu alloys during high-temperature aging and its influence on Shear Strength |
Master Thesis |
2024 |
|
Investigation of the Effect of Al and Zr doping in Ni-rich NCM cathode materials for lithium-ion batteries |
Master Thesis |
2023 |
|
Encapsulation of power modules with inorganic potting compounds |
Master Thesis |
2023 |
|
Stereolithographic Fabrication and Characterization of functionally porous LATP solid-state electrolytes |
Master Thesis |
2023 |
|
Multimaterial Laser Beam Melting: Fabrication of dental implants made of tantalum and the titanium alloy Ti6AIAV |
Master Thesis |
2022 |
|
Influence of Manufacturing Conditions on the PTC Behavior of barium titanate |
Bachelor Thesis |
2022 |
|
Effects of Novel Coatings on the strength of consumer glass |
Master Thesis |
2022 |
|
Effect of CaO on the Properties of Lead-Free PTC ceramics |
Bachelor Thesis |
2021 |
|
Effect of Grain Size on the Electromechanical properties of |
Master Thesis |
2021 |
|
Synthesis and Characterization of BA2CuWO6-based perovskite systems |
Bachelor Thesis |
2021 |
|
Compaction of a C/C-SiC Material |
Master Thesis |
2021 |
|
Effect of Sintering Conditions on the Properties of BT-BNT |
Bachelor Thesis |
2020 |
|
Development and Characterization of Various Forming Processes for the Solid-State Electrolyte LATP |
Bachelor Thesis |
2020 |
|
Investigation of the wettability of lithium-ion batteries in different components and their effect on the cell as measured by EIS |
Master Thesis |
2020 |
|
Experimental Investigation and Model Validation of the reliability of cut-and-crimp connections under environmental influences |
Master Thesis |
2020 |
|
Synthesis and Characterization of Lithium Titanate as anode material for solid-state lithium-ion batteries |
Bachelor Thesis |
2020 |
|
Synthesis and Characterization of BT-BKT for lead-free PTCR materials |
Bachelor Thesis |
2020 |
|
Influence of Fabrication Methods on the Electrical properties of lead-free PTC ceramics based on BT-BNT |
Bachelor Thesis |
2020 |
|
Synthesis and Investigation of Hierarchically Structured LiFe₀.₂Mn₀.₈PO₄/C composites for electrochemical storage |
Master Thesis |
2020 |
|
Synthesis and Characterization of KATP-Based compounds with (partial) substitution of Ti, Al |
Master Thesis |
2020 |
|
Reliability of magnetic materials for high-tech applications |
Master Thesis |
2020 |
|
Increasing the Bond Strength of Temperature-Stressed ceramic-cement composites |
Master Thesis |
2020 |
|
Development of photocatalytic anodized coatings for Create Functional Aluminum Surfaces |
Master Thesis |
2020 |
|
Realization and Characterization of NDK-HDK Core-Shell Structures |
Master Thesis |
2020 |
|
Influence of the Green Body Structure on the compaction behavior of oxide |
Master Thesis |
2020 |
|
Preparation and Characterization of water-based screen-printing pastes for joining metal and ceramics using glass-ceramics |
Bachelor Thesis |
2019 |
|
Quartz glass bodies produced from silicon dioxide granules |
Master Thesis |
2019 |
|
Development of an automated high-temperature test rig for resistance measurement |
Bachelor Thesis |
2019 |
|
Fabrication of Electrodes on Current Conductors made of expanded metal |
Bachelor Thesis |
2019 |
|
Lithium-ion batteries: The coating of anodes with lithium titanate |
Bachelor Thesis |
2019 |
|
Fabrication and Characterization of Open-Pore aluminum oxide ceramics for infiltration with nickel-based alloys |
Master Thesis |
2019 |
|
Investigation of the R-curve behavior of silicon nitride and silicon carbide composites |
Bachelor Thesis |
2019 |
|
Development and Characterization of long-fiber-reinforced SiC/SiC materials based a novel manufacturing process |
Master Thesis |
2019 |
|
Development and Characterization of sponge structures based on solid-state ionic conductors for Li-ion batteries |
Bachelor Thesis |
2019 |
|
Investigations into the wear behavior of the new piston guide in a fuel injection pump for gasoline engines with high-pressure direct gasoline injection |
Bachelor Thesis |
2019 |
|
Molding of cathodes for lithium-ion batteries in a calender |
Bachelor Thesis |
2019 |
|
Fracture mechanics studies on fiber-reinforced ceramics |
Master Thesis |
2019 |
|
Investigations of the thermal degradation behavior of stereolithographically manufactured SiO₂ glass components |
Bachelor Thesis |
2019 |
|
Development of open-pored pellets and films made of amorphous silicon dioxide |
Bachelor Thesis |
2019 |
|
Mechanical and Microstructural Characterization of glass-sol-compounds for solid oxide fuel cells |
Master Thesis |
2018 |
|
Investigations into the Use of Water-Based binders in the processing of high-voltage spinels |
Bachelor Thesis |
2018 |
|
Effect of Lanthanum Content on Sintering Properties, microstructural development, Arrhenius behavior, and electrical properties of barium titanate. |
Bachelor Thesis |
2018 |
|
Fabrication and Characterization of Screen-Printing Pastes for joining metal and ceramics using graded glass solder |
Bachelor Thesis |
2018 |
|
Fabrication of Electrodes for Lithium-Ion Batteries in a calender |
Master Thesis |
2018 |
|
Electrode Production from Alcohol-Water Mixtures |
Bachelor Thesis |
2018 |
|
Development of photopolymerizable suspensions for the fabrication printed, transparent structures made of SiO₂ |
Master Thesis |
2018 |
|
Synthesis and Microstructural Characterization of barium titanate |
Bachelor Thesis |
2018 |
|
Investigations into the Wear Behavior of a new fuel injection pump for gasoline engines with high-pressure direct gasoline injection |
Master Thesis |
2018 |
|
Development and Characterization of Stereolithographically printed components made from silica-based pastes |
Bachelor Thesis |
2018 |
|
Influence of Microstructure on the Stability of Ni/8YSZ anodes in high-temperature solid oxide fuel cells (SOFC) |
Bachelor Thesis |
2018 |
|
Development of Solvent-Reduced Coating Processes for lithium-ion batteries |
Bachelor Thesis |
2017 |
|
Effect of high-molecular-weight PAA additives in Cathodes for Lithium-Ion Batteries |
Bachelor Thesis |
2017 |
|
Experimental Investigation of Nonlinear Mechanical Behavior of PZT |
Master Thesis |
2017 |
|
Measurement of R-curve behavior using 4-point bending and DCDC specimens |
Bachelor Thesis |
2017 |
|
The Production of Cathodes for Lithium-Ion Batteries from Nanostructured Granules |
Master Thesis |
2017 |
|
Effect of the Stoichiometry and Hydration of Na₂CO₃ on the synthesizability and sintering behavior of Bi₀.₅Na₀.₅TiO₃ |
Bachelor Thesis |
2017 |
|
Development and Characterization of Half-Cells based on thin solid-state ionic conductors for lithium-ion batteries |
Master Thesis |
2017 |
|
Non-Destructive Analysis of Grain Growth in the functional ceramic strontium titanate |
Bachelor Thesis |
2017 |
|
Investigation of the R-curve behavior of silicon nitride and silicon carbide composites |
Master Thesis |
2017 |
|
Commissioning of a gasoline engine fuel injection pump test stand up to 600 bar for investigations into wear behavior an injection pump |
Bachelor Thesis |
2017 |
|
Aging Effects in PTC Materials |
Bachelor Thesis |
2017 |
|
Synthesis and Characterization of (Li,La)TiO3 as a solid-state electrolyte |
Bachelor Thesis |
2016 |
|
Investigation of the Effect of Particle Size on the properties of glass-ceramic screen-printing pastes |
Bachelor Thesis |
2016 |
|
Grain Growth in Barium-Strontium Titanate |
Master Thesis |
2016 |
|
Synthesis of NaSICON and Improvement of wetting with liquid sodium at 100–120°C |
Bachelor Thesis |
2016 |
|
Investigations into the Stability of Cathode Pastes for lithium-ion batteries—the effect of a two-step preparation process |
Bachelor Thesis |
2016 |
|
Investigations into the Use of Water-Based binders in the manufacture of lithium-ion batteries—the effect of acids for pH adjustment |
Bachelor Thesis |
2016 |
|
Fabrication and Characterization of Glass-Sol-Based joints in metal-ceramic laminates |
Master Thesis |
2016 |
|
Decoupled soot processing in aqueously processed lithium-ion batteries |
Bachelor Thesis |
2016 |
|
Characterization of the Mechanical Properties of glaze on alumina porcelain long-rod insulators |
Bachelor Thesis |
2016 |
|
Paste Development for Screen Printing of Half-Cells for all-solid-state lithium-ion batteries |
Master Thesis |
2016 |
|
Effect of PAA Additives as Water-Based binder in electrodes for lithium-ion batteries |
Bachelor Thesis |
2016 |