Talks und Poster

Talks und Poster Summerschool 2026
Autoren	Titel
Paula Lorson, Marc Kamlah	Modeling phase-separation from OCV data (no poster available)
Roshan Rajakrishnan et al.	Modeling the deformation and ductile damage of irradiated EUROFER97 for fusion reactor design optimization
Maximilian Fath	Quantifying the Impact of Secondary Particle Cracks on NMC Electrodes in Li-ion Batteries
Chao Li et al.	A unified viscoplastic constitutive model for ratcheting behaviour and creep–fatigue interaction of EUROFER97 steel at 550 °C (no poster available)
Rohit Pratyush Behera et al.	Unlocking Damage Tolerant pathways in Ceramics: From Bioinspired design to Dislocationprogramming
Filiz Pinar Seren et al.	Investigating Ionic Depletion and Lithium Metal Growth at High Rates Using Operando Light Microscopy (no poster available)
Ved Gumaste et al.	Dislocation Imaging and Analysis with 4D-STEM-in-SEM

Oliver Preuß	Dislocations as Key Enablers on the Road toFunctional and Resilient Oxide Ceramics
Angelica Medina et al.	Mechanistic insights of latent hardening in α-iron studied by direct quantification of dislocation junction strength
Siyu Zhang et al.	Non-destructive and destructive characterization of upscaled W/EUROFER functionally graded material for fusion application (no poster available)
Chukwudalu Okafor et al.	Mechanically-seeded Dislocations Delay Cracking and Change the Dominant Crack Mode in SrTiO3 During Microscratching
Maral Sarebanzadeh et al.	How Does Hydrogen Affect Plasticity in BCC Materials?
Ashwini Kumar Mishra et al.	Tungsten shield for Fusion First Wall (no poster available)
Jiyeong Lee et al.	Towards understanding the ductile-to-brittle transition in chromium: Establishing a pure Cr baseline for future Cr-Re comparison
	Synchrotron Laue Microdiffraction for Crystal-Scale Characterization
Lakshay Chauhan et al.	Effect of irradiation damage dose on the microstructural evolution in Co-free High entropy alloy
	Unravelling temperature-driven radiation defect
Kentaro Masuta	Plasma-Driven Hydrogen Permeation throughTungsten Films Deposited by Ar Plasma Sputtering

Alexandra Pamperin, Marc Kamlah	Effects of primary particle cracks on physical effective transport properties

Talks und Poster Summerschool 2024
Autoren	Titel
Lakshay Chauhan et al.	Characterization of irradiation defects in Co free high entropy alloy (no poster available)
Ashwini Kumar Mishra et al.	Fortified Tungsten, Shielding Steel (no poster available)
Ashwini Kumar Mishra et al.	Advanced phased array ultrasonic testing technique for detecting delamination (Talk)
Konrad Prikoszovich et al.	Investigating the strain distribution of iron strains in the elastic deformation regime (no poster available)
Niklas Ribic et al.	Conductivity of stretched printed films
Paula Lorson et al.	Modeling battery half cells with phase-separating active materials (no poster available)
Stefan Mück et al.	Applications of the Electrochemical Quartz Crystal Microbalance (EQCM-D) in Battery Research (no poster available)
Reiner Mönig et al.	Harmonic Oscillations and their use in a Quartz Crystal Microbalance with Dissipation(QCM-D) (no poster available)
Chukwudalu Okafor et al.	Doping-Regulated Room-temperature Dislocation Plasticity in Oxides: A scale bridging study on SrTiO3
Robin Fréville et al.	Digital Image Correlation strain measurement on Laue microdiffraction patterns
Johannes Reibenspies et al.	Understanding Hydrogen Enhanced DEcohesion through micromechanical fracture tests
Camila Aguiar Teixeira	Electron backscattered diffraction - EBSD (no poster available)
Eloho Okotete et al.	Strategies for avoiding FIB artefacts in small scale tracture
Johanna Naumann et al.	Combining Methods to Model the Performance of a Sodium-Ion Battery
Marc Kamlah	Multiphysics Modeling for Electrochemical Energy Storage
Angelica Medina et al.	ECCI as a Tool for Understanding Strain Hardening in Dual-Phase Steels (Talk)
Angelica Medina et al.	Understanding Anisotropic Hardening in Ferrite (no poster available)
Divya Bandla et al.	ECCI: A tool to characterize the deformation structures in SEM (Talk)
Divya Bandla et al.	Understanding the grain boundary sliding behavior of Ni bicrystal via micropillar compression testing (no poster available)
Karlheinz Weber	Additive Manufacturing - An Overview (no poster available)
Yinxia Zhang et al.	Columnar grain boundaries are the weakest link in hard coatings: Insights from micro cantilever testing with bridge notches

DPG Frühjahrstagung (Berlin) 2024
Autoren	Titel
Müller, Joris et al.	Measurement of Tritium Content with a novel Detector System

Poster Summerschool 2022
Autoren	Titel
Mück, Stefan et al.	Operando Investigations and High Resolution Microscopy of SEI on Metal Anodes
Pamperin, Alexandra	The resistor network method for computing effective transport properties of porous electrodes
Xia, Huihuang; Kamlah, Marc	Computational modelling of droplet evaporation with an improved Coupled Level Set and Volume of Fluid (i-CLSVoF) framework
Medina, Angelica et al.	Spatially characterization of damage initiation and growth at the micro level
Arigela, Viswanadh Gowtham et al.	Development and application of a high-temperature micromechanics stage with a novel temperature measurment approach
Okotete, Eloho et al.	A geometry for interface fracture analysis at the mircron scale
Park, Jeong-Hyeon et al.	Femtosecond Laser Ablation Damage on Single Crystal Ge
Teixeira, Camila A. et al.	Quantification of twinning stress of CoCrFeNiMn high entropy alloy by in situ micropillar compression
Becherer, J. et al.	The Growth Mechanism of Lithiium Dentrites and its Coupling to Mechanical Stress
Brendel, T. et al.	The Effect of Mechanical Cycling on the Electronic Conductivity of Composite Electrodes
Wahn, Alexandra; Kamlah, Marc	Particle based computation of mechanics in granular multiphase electrodes
Sutter, Felix; Kamlah, Marc	Microscopically motivated modeling of ferroelectric materials
Kurpiers, Chantal et al.	In-situ characterization of tetrahedral microlattices
Zhang, Yinxia et al.	Identifying toughening concepts in CrN/AlN multilayer coatings
Yuan, Qian et al.	Dislocation loop evolution upon annealing of neutron-irradiated RAFM steel
Prikoszovich, Konrad	A look inside with X-ray Tomography
Metzler, Timo et al.	Fracture Mechanics Testing and Simulation of an RPV-Steel in the DBT Region using Miniaturized Specimens
Lu, Kaiju et al.	Low-cycle fatigue deformation behaviors of CoCrFeMnNi and CoCrNi
Jetter, Mathias; Aktaa, Jarir	Brittle Fracture Assessment for Tungsten and Tungsten alloy components