Publikationen 2023

Design update of the European DEMO Helium Cooled Pebble Bed breeding blanket
Zhou, G.; Aktaa, J.; Alonso, D.; Boccaccini, L. V.; Cristescu, I.; Garnier, C.; u. a.
2023. 21st International Workshop on Ceramic Breeder Blanket Interactions (CBBI-21 2023), Granada, Spanien, 19.–20. Oktober 2023
A Framework to Generate, Store, and Publish FAIR Data in Experimental Sciences
Garabedian, N.; Bagov, I.; Flachmann, M.; Ye, N.; Meller, M.; Bresser, F.; u. a.
2023. SEMPDS 2023: Posters and Demos at SEMANTiCS 2023 - 19th International Conference on Semantic Systems (SEMANTICS), Leipzig, 20th-22nd September 2023, 5 S., CEUR-WS
Modeling battery intercalation materials with the multiphase-field method. Dissertation
Daubner, S.
2023, Dezember 1. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000164858
Morphology‐Dependent Influences on the Performance of Battery Cells with a Hierarchically Structured Positive Electrode**
Naumann, J.; Bohn, N.; Birkholz, O.; Neumann, M.; Müller, M.; Binder, J. R.; u. a.
2023. Batteries & Supercaps, 6 (12), Art.-Nr.: e202300264. doi:10.1002/batt.202300264
Strength Contribution by Long-Range Order in Al-containing Refractory High Entropy Alloys
Laube, S.; Winkens, G.; Kauffmann, A.; Li, J.; Kirchlechner, C.; Heilmaier, M.
2023. doi:10.5445/IR/1000163612
Overview of the design activities of the EU DEMO Helium Cooled Pebble Bed breeding blanket
Zhou, G.; Aktaa, J.; Alonso, D.; Boccaccini, L. V.; Cristescu, I.; Garnier, C.; u. a.
2023. 15th International Symposium on Fusion Nuclear Technology (ISFNT 2023), Las Palmas de Gran Canaria, Spanien, 10.–15. September 2023
Elemental segregation in CoCrFeMnNi high entropy alloy after intermediate-temperature low cycle fatigue loading
Litvinov, D.; Lu, K.; Walter, M.; Aktaa, J.
2023. Materials Today Communications, 35, Art.Nr.: 106030. doi:10.1016/j.mtcomm.2023.106030
Effect of neutron irradiation to 0.7 dpa and 1.4 dpa on the tensile properties and fracture surface of EUROFER97 steel
Zinovev, A.; Chang, C.-C.; Van Eyken, J.; Gaganidze, E.; Terentyev, D.
2023. Journal of Nuclear Materials, 587, 154742. doi:10.1016/j.jnucmat.2023.154742
Hardening effect of diffusible hydrogen on BCC Fe-based model alloys by in situ backside hydrogen charging
Rao, J.; Lee, S.; Dehm, G.; Duarte, M. J.
2023. Materials & Design, 232, Art.-Nr.: 112143. doi:10.1016/j.matdes.2023.112143
How to avoid FIB-milling artefacts in micro fracture? A new geometry for interface fracture
Okotete, E.; Brinckmann, S.; Lee, S.; Kirchlechner, C.
2023. Materials & Design, 232, Art.-Nr.: 112134. doi:10.1016/j.matdes.2023.112134
BIOMOD Reibungsminderung durch Oberflächenmodifikation nach biologischem Vorbild
Cerveny, D.; Weismann, D.; Bethge, K.; Tesari, I.
2023, Juni 24. Wissenschaftsfestival EFFEKTE (2023), Karlsruhe, Deutschland, 17.–25. Juni 2023
Von der Faulpelzecke zum Zugkegel
Mattheck, C.; Bethge, K.
2023. Konstruktionspraxis, 2023 (9), S. 30
Einführung in die VTA-Methode und digitaler Baumlehrpfad
Mattheck, C.
2023, August 1. Inhouse-Seminar im Großen Kuppelsaal des Rathaus Wemmetsweiler (2023), Merschweiller, Frankreich, 1. August 2023
Unsupervised clustering of nanoindentation data for microstructural reconstruction: Challenges in phase discrimination
Jentner, R. M.; Srivastava, K.; Scholl, S.; Gallardo-Basile, F. J.; Best, J. P.; Kirchlechner, C.; u. a.
2023. Materialia, 28, Art.-Nr. 101750. doi:10.1016/j.mtla.2023.101750
Lieber Rollen als Gleiten - Wirbel in festen Körpern mit dem Bachkiesel als Lehrmeister
Mattheck, C. G.
2023, Juni 15. 26. Engelskirchener Kunststoff-Technologie Tage (2023), Lindlar, Deutschland, 15.–16. Juni 2023
The role of incoherent twin boundaries on the plasticity of Cu micropillars
Hosseinabadi, R.; Brognara, A.; Kirchlechner, C.; Best, J. P.; Dehm, G.
2023. Materials & Design, 232, Art.-Nr. 112164. doi:10.1016/j.matdes.2023.112164
Mattheck, C.
2023, Juni 20. Inhouse-Seminar / Liebherr-Werk Nenzing (2023), Nenzing, Österreich, 20. Juni 2023
Von Bachkieseln, Robin Hood-Wirbeln und klimafesteren Bäumen
Mattheck, C.
2023, Juni 17. Tag der offenen Tür, KIT Campus Nord (2023), Karlsruher Institut für Technologie, 17. Juni 2023
Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy
Lu, K.; Chauhan, A.; Litvinov, D.; Schneider, M.; Laplanche, G.; Aktaa, J.
2023. Journal of the Mechanics and Physics of Solids, 180, Art.-Nr.: 105419. doi:10.1016/j.jmps.2023.105419
Comparative analysis of low cycle fatigue behavior of pre-corroded standard and sub-sized EUROFER97 specimens exposed to ceramic breeder environment
Gaisina, E.; Gaisin, R.; Leys, J.; Knitter, R.; Aktaa, J.; Walter, M.
2023. Nuclear Materials and Energy, 36, Art.-Nr.: 101497. doi:10.1016/j.nme.2023.101497
Automated classification of granular bainite and polygonal ferrite by electron backscatter diffraction verified through local structural and mechanical analyses
Jentner, R. M.; Tsai, S. P.; Welle, A.; Scholl, S.; Srivastava, K.; Best, J. P.; u. a.
2023. Journal of Materials Research, 38, 4177–4191. doi:10.1557/s43578-023-01113-7
Embrittlement of WCLL blanket and its fracture mechanical assessment
Aktaa, J.; Gaganidze, E.; Bongioví, G.; Arena, P.; Spagnuolo, G. A.; Aiello, G.; u. a.
2023. Nuclear Fusion, 63 (9), Art.-Nr.: 096016. doi:10.1088/1741-4326/ace984
KadiStudio Use-Case Workflow: Automation of Data Processing for in Situ Micropillar Compression Tests
Al-Salman, R.; Teixeira, C. A.; Zschumme, P.; Lee, S.; Griem, L.; Aghassi-Hagmann, J.; u. a.
2023. Data Science Journal, 22, Art.-Nr.: 21. doi:10.5334/dsj-2023-021
In Situ Pyrolysis of 3D Printed Building Blocks for Functional Nanoscale Metamaterials
Sun, Q.; Dolle, C.; Kurpiers, C.; Kraft, K.; Islam, M.; Schwaiger, R.; u. a.
2023. Advanced Functional Materials. doi:10.1002/adfm.202302358
An improved CFD-DEM framework for gas-liquid-solid multiphase free surface flow. Dissertation
Xia, H.
2023, August 9. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000161217
Application of a nanoindentation-based approach for parameter identification to a crystal plasticity model for bcc metals
Gallardo-Basile, F.-J.; Roters, F.; Jentner, R. M.; Best, J. P.; Kirchlechner, C.; Srivastava, K.; u. a.
2023. Materials Science and Engineering: A, 881, Art.-Nr.: 145373. doi:10.1016/j.msea.2023.145373
Heterogeneous microstructures tuned in a high throughput architecture
Short, M.; Müller, J.; Lee, S.; Fornasier, H.; Köhler, U.; Ott, V.; u. a.
2023. Materials & Design, 229, Art.-Nr.: 111834. doi:10.1016/j.matdes.2023.111834
An unexplored regime of binary packing under extreme mixture conditions
Suo, S.; Zhai, C.; Kamlah, M.; Gan, Y.
2023. Powder Technology, 428, Art.-Nr. 118802. doi:10.1016/j.powtec.2023.118802
Wirbel am Schlitzende – Engel der Harmonie
Mattheck, C.; Bethge, K.; Weber, K.; Tesari, I.
2023. Konstruktionspraxis, 2023 (5), 22–23
Die Körpersprache der Bauteile - Universalformen aus der Natur für die Technik
Mattheck, C.
2023, Juli 4. 20-jähriges Bestehen des Kunststoff-Netzwerk Franken (2023), Trebgast, Deutschland, 4. Juli 2023
Creep fatigue analysis of DEMO divertor components following the RCC-MRx design code
Muscat, M.; Mollicone, P.; You, J. H.; Mantel, N.; Jetter, M.
2023. Fusion Engineering and Design, 188, Art.-Nr.: 113426. doi:10.1016/j.fusengdes.2023.113426
Lateral Currents in Shingle Solar Modules Detected by Magnetic Field Imaging
Klasen, N.; Weber, J.; Kraft, A.; Neuhaus, H.
2023. IEEE Journal of Photovoltaics, 13 (4), 552–557. doi:10.1109/JPHOTOV.2023.3271892
Variational free energy based macroscopical modeling of ferroelectroelasticity
Sutter, F.; Kamlah, M.
2023. Journal of the Mechanics and Physics of Solids, 178, Art.-Nr.: 105341. doi:10.1016/j.jmps.2023.105341
3D‐Printed Inherently Porous Structures with Tetrahedral Lattice Architecture: Experimental and Computational Study of Their Mechanical Behavior
Kuzina, M. A. A.; Kurpiers, C. M. M.; Tsai, Y.-Y.; Schwaiger, R.; Chang, S.-W.; Levkin, P.
2023. Macromolecular Materials and Engineering, 308 (9), Art.-Nr.: 2300041. doi:10.1002/mame.202300041
Effect of neutron irradiation to 0.7 and 1.4 dpa on the tensile mechanical properties and microstructure of EUROFER97 steel
Zinovev, A.; Chang, C.-C.; Van Eyken, J.; Gaganidze, E.; Terentyev, D.
2023. Science talks, 6, Art.-Nr. 100214. doi:10.1016/j.sctalk.2023.100214
Macro-scale modeling of finite strain viscoplasticity in irradiated F/M steels: a continuum thermodynamic framework
Rajakrishnan, R. R. R.; Gaganidze, E.; Terentyev, D.; Aktaa, J.
2023. Continuum Mechanics and Thermodynamics, 35 (2), 521–543. doi:10.1007/s00161-023-01193-0
Experimental and Data-driven Workflows for Microstructure-based Damage Prediction. Dissertation
Durmaz, A. R.
2023, April 25. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000158121
In situ Observation of Phase Transformations in Steels. Dissertation
Pfund, M.
2023, März 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000157327
3D microstructure evolution in NaₓFePO₄ storage particles for sodium-ion batteries
Zhang, T.; Sotoudeh, M.; Groß, A.; McMeeking, R. M.; Kamlah, M.
2023. Journal of Power Sources, 565, 232902. doi:10.1016/j.jpowsour.2023.232902
An interface crack in piezoelectric bimaterial with one electrically conductive and two electrically permeable zones at its faces
Govorukha, V.; Kamlah, M.; Zhao, S.
2023. Journal of Mechanics of Materials and Structures, 17 (5), 455–468. doi:10.2140/jomms.2022.17.455
Porous polymeric microparticles foamed with supercritical CO₂ as scattering white pigments
Borgmann, L. M.; Johnsen, S.; Oliveira, C., Santos de; Martins de Souza e Silva, J.; Li, J.; Kirchlechner, C.; u. a.
2023. Bioinspiration & Biomimetics, 18 (2), Art.-Nr. 026011. doi:10.1088/1748-3190/acb899
Warum der Wechselschub Zickzack-Risse verursacht
Mattheck, C.; Bethge, K.
2023. Konstruktionspraxis, 2023 (2), 14 – 15
Umweltschutz durch Stärkung von Technikinteresse und -bildung in der Schule mittels Denkwerkzeugen nach der Natur
Arnold, J.; Latzel, M.; Tesari, I.; Hansjosten, I.; Bethge, K.; Kappel, R.; u. a.
2023. 7. Technikdidaktik-Symposium des Journal of Technical Education (JOTED 2023), Stuttgart, Deutschland, 23.–25. November 2022
Evolution of irradiation defects in fusion structural steels at high temperatures. Dissertation
Yuan, Q.
2023, Januar 25. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000155037
Functionally graded tungsten/EUROFER coating for DEMO first wall: From laboratory to industrial production
Grammes, T.; Emmerich, T.; Qu, D.; Heinze, O.; Vaßen, R.; Aktaa, J.
2023. Fusion Engineering and Design, 188, Article no: 113430. doi:10.1016/j.fusengdes.2023.113430
Electromechanical Behavior of Al/AlO Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements
Putz, B.; Edwards, T. E. J.; Huszar, E.; Gruber, P. A.; Gradwohl, K.-P.; Kreiml, P.; u. a.
2023. Advanced Engineering Materials, 25 (2), Art.-Nr.: 2200951. doi:10.1002/adem.202200951
Impact of Microstructure of Nanoscale Magnetron Sputtered Ru/Al Multilayers on Thermally Induced Phase Formation
Ott, V.; Schäfer, C.; Suarez, S.; Woll, K.; Mücklich, F.; Seifert, H. J.; u. a.
2023. Coatings, 13 (1), Art.-Nr.: 149. doi:10.3390/coatings13010149
Hydrogen embrittlement of twinning-induced plasticity steels: Contribution of segregation to twin boundaries
Khanchandani, H.; Rolli, R.; Schneider, H.-C.; Kirchlechner, C.; Gault, B.
2023. Scripta Materialia, 225, Art.-Nr.: 115187. doi:10.1016/j.scriptamat.2022.115187
Der Spröd-duktil-Übergang in ultrafeinkörnigem Wolfram. Dissertation
Bonnekoh, C.
2023. KIT Scientific Publishing. doi:10.5445/KSP/1000153067
Classification of slip system interaction in microwires under torsion
Zoller, K.; Gruber, P.; Ziemann, M.; Görtz, A.; Gumbsch, P.; Schulz, K.
2023. Computational Materials Science, 216, Art.-Nr.: 111839. doi:10.1016/j.commatsci.2022.111839
Probing porosity in metals by electrical conductivity: Nanoscale experiments and multiscale simulations
Kaiser, T.; Dehm, G.; Kirchlechner, C.; Menzel, A.; Bishara, H.
2023. European Journal of Mechanics - A/Solids, 97, Art.-Nr.: 104777. doi:10.1016/j.euromechsol.2022.104777