Publikationsliste


  1. Comparison of two kinetic approaches for modeling of radial hydride fraction in zirconium-based fuel rod cladding
    Kolesnik, M.
    2025. Nuclear Engineering and Technology, 57 (7), 103479. doi:10.1016/j.net.2025.103479
  2. Long-term thermal stability of biphasic LiSiO-LiTiO EU reference tritium breeder ceramics enriched in Li-6
    Leys, J.; Bergfeldt, T.; Leys, O.; Knitter, R.
    2025. Nuclear Materials and Energy, 43, 101932. doi:10.1016/j.nme.2025.101932
  3. Non-destructive ultrasonic inspections of small-scale mock-ups provided with advanced tungsten armours for DEMO divertor target
    De Luca, R.; Cacciotti, E.; Cerocchi, M.; Crea, F.; Roccella, S.; Greuner, H.; Hunger, K.; Bonnekoh, C.; Galatanu, A.; Iveković, A.; Jenuš, P.; Wirtz, M.
    2025. Fusion Engineering and Design, 215, Art.-Nr.: 115007. doi:10.1016/j.fusengdes.2025.115007
  4. Thermodynamic assessment of the sulfur and the nickel-sulfur systems
    Ma, W.; Gebauer, J.; Czerny, A. K.; Chegeni, M. R.; Gallino, I.; Busch, R.; Seifert, H. J.
    2025. Calphad, 89, 102821. doi:10.1016/j.calphad.2025.102821
  5. Improved oxidation behavior of M–20Cr–20Ta (M: Ni, Fe, Co) ternary alloys by formation of complex Cr–Ta-based oxides
    Tang, C.; Schäfer, B.; Schroer, C.; Gorr, B.
    2025. Corrosion Science, 249, Article no: 112847. doi:10.1016/j.corsci.2025.112847
  6. Electrochemical Cell Modeling of Hierarchically Structured Electrodes in Lithium-Ion Batteries. PhD dissertation
    Naumann, J.
    2025, May 20. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000181285
  7. Growth, microstructure and properties characterization of multiferroic heterostructures. PhD dissertation
    Nergis, B.
    2025, April 15. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000181018
  8. Understanding nanoscale oxide build up on EUROFER97
    Jovičević-Klug, P.; Giesbrecht, C. K.; Manoj Prabhakar, J.; Schwarz, T. M.; Bonnekoh, C.; Rieth, M.; Rohwerder, M.
    2025. Corrosion Science, 245, Article no: 112691. doi:10.1016/j.corsci.2025.112691
  9. Investigating the Reduction of Fluoroethylene Carbonate and Vinylene Carbonate in Lithium‐Ion Cells with Silicon‐Graphite Anodes
    Stockhausen, R.; Gehrlein, L.; Bergfeldt, T.; Hofmann, A.; Müller, F. J.; Maibach, J.; Hofmann, K.; Gordon, R.; Smith, A.
    2025. Batteries & Supercaps, 8 (4). doi:10.1002/batt.202400499
  10. Gigahertz laser ablation of lithium nickel manganese cobalt oxide for lithium-ion batteries
    Straßburger, N.; Zhu, P.; Pfleging, W.
    2025. R. Kling, W. Pfleging & K. Sugioka (Eds.), Laser-based Micro- and Nanoprocessing XIX, San Francisco, 25th-31st January 2025, Art.-Nr. 1335104, SPIE
  11. Optimizing and upscaling of USP laser structuring for 3D lithium-ion battery electrodes for fast-charging and reduced lithium plating
    Sterzl, Y.; Pulst, M.; Xiao, S.; Franke, C.; Pfleging, W.
    2025. R. Kling, W. Pfleging & K. Sugioka (Eds.), Laser-based Micro- and Nanoprocessing XIX, Ed.: R. Kling, W. Pfleging, K. Sugioka, SPIE. doi:10.1117/12.3039579
  12. Ultrafast laser ablation of high-voltage cathodes using GHz burst mode operation
    Reinhold, C.; Pfleging, W.
    2025. Laser-based Micro- and Nanoprocessing XIX. Ed.: R. Kling, Art.-Nr.: 1335107, SPIE. doi:10.1117/12.3041999
  13. Optimizing and upscaling of USP laser structuring for 3D lithium-ion battery electrodes for fast-charging and reduced lithium plating
    Sterzl, Y.; Pulst, M.; Xiao, S.; Franke, C.; Pfleging, W.
    2025. (R. Kling, W. Pfleging & K. Sugioka, Eds.), SPIE. doi:10.5445/IR/1000181505
  14. Gigahertz laser ablation of lithium nickel manganese cobalt oxide for lithium-ion batteries
    Straßburger, N.; Zhu, P.; Pfleging, W.
    2025. (R. Kling, W. Pfleging & K. Sugioka, Eds.), SPIE. doi:10.1117/12.3043847
  15. Laser printing of silicon-containing multilayer anodes with optimized electrode inks
    Rist, U.; Pfleging, W.
    2025. Laser-based Micro- and Nanoprocessing XIX. Ed.: R. Kling, Art.-Nr.: 133510E, SPIE. doi:10.1117/12.3042057
  16. Upscaling Advanced 3D Electrode Architectures for Fast Charging Batteries
    Pfleging, W.
    2025, March 18. 42. International Battery Seminar and Exhibit (2025), Orlando, FL, USA, March 17–20, 2025
  17. Research on poly(ether ketone ketone) PEKK
    Hanemann, T.; Klein, A.; Baumgärtner, S.; Jung, J.; Wilhelm, D.; Antusch, S.
    2025, March 12. doi:10.35097/hrkyk1qbshs6wpv4
  18. Laser Technology for Development of Advanced Batteries
    Pfleging, W.
    2025, March 11. Light Conference on Laser & Quantum (2025), Shanghai, China, March 11–12, 2025
  19. High-dose neutron irradiation of beryllium and titanium beryllide: Summary and outlook
    Chakin, V.; Rolli, R.; Schneider, H.-C.; Gaisin, R.; Vladimirov, P.; Klimenkov, M.; Duerrschnabel, M.; Zimber, N.; Rieth, M.; Gorr, B.; Hernández, F. A.; Radloff, D.; Fedorov, A.; Zmitko, M.; Nakamichi, M.; Udartsev, S.
    2025. Nuclear Materials and Energy, 42, 101910. doi:10.1016/j.nme.2025.101910
  20. Effect of irradiation parameters on defect evolution in neutron irradiated tungsten
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Schneider, H. C.; Terentyev, D.; Van Renterghem, W.
    2025. Journal of Nuclear Materials, 607, 155673. doi:10.1016/j.jnucmat.2025.155673
  21. Thermophysical Properties of NbAlO₄ and TaAlO₄
    Gebauer, J.; Rohde, M.; Franke, P.; Seifert, H. J.
    2025. International Journal of Thermophysics, 46 (3), 41. doi:10.1007/s10765-025-03512-w
  22. Embrittlement of chromium alloys after neutron irradiation at high temperatures to damage doses of 10–46 dpa
    Chakin, V.; Gaisin, R.; Bonnekoh, C.; Duerrschnabel, M.; Rieth, M.; Gorr, B.; Brodnikikovsky, M.; Krapivka, M.; Firstov, S.
    2025. Nuclear Materials and Energy, 42, Article no: 101871. doi:10.1016/j.nme.2025.101871
  23. Engineering concept of the VNS - a beam-driven tokamak for component testing
    Bachmann, C.; Siccinio, M.; Acampora, E.; Aiello, G.; Bajari, J.; Boscary, J.; Bruschi, A.; Claps, V.; Cufar, A.; Elbez-Uzan, J.; Federici, G.; Franke, T.; Germano, G.; Giannini, L.; Gliss, C.; Härtl, T.; Hauer, V.; Hopf, C.; Kannamüller, M.; Leichtle, D.; Lombroni, R.; Luongo, C.; Maisonnier, D.; Marek, P.; Maione, I.; Marzullo, D.; Maviglia, F.; Mollicone, P.; Moscato, I.; Mozzillo, R.; Muscat, M.; Pagani, I.; Park, J. H.; Pautasso, G.; Pereslavtsev, P.; Quartararo, A.; Renard, S.; Schreck, S.; Späh, P.; Steinbacher, T.; Tarallo, A.; Valentine, A.; Vinoni, P.; Vallone, E.; Vigano, F.; Wiesen, S.; Wu, C.; Zammuto, I.
    2025. Fusion Engineering and Design, 211, Art.-Nr.: 114796. doi:10.1016/j.fusengdes.2024.114796
  24. Mechanical properties and thermal stabilities of multilayered AlCrBN/AlTiSiN hard coatings
    Chang, Y.-Y.; Tsai, T.-H.; Chang, C.-E.; Feng, H.-Q.; Yang, M.-X.; Stüber, M.; Ulrich, S.
    2025. Surface and Coatings Technology, 498, Art.-NR.: 131876. doi:10.1016/j.surfcoat.2025.131876
  25. Dinuclear Dysprosium Compounds: The Importance of Rigid Bridges
    Pfleger, R. F.; Briganti, M.; Bonde, N.; Ollivier, J.; Braun, J.; Bergfeldt, T.; Piligkos, S.; Ruppert, T.; Anson, C. E.; Perfetti, M.; Bendix, J.; Powell, A. K.
    2025. Chemistry – A European Journal, 31 (7), Art.-Nr.: 202403002. doi:10.1002/chem.202403002
  26. Exploring the Aging Dynamics of Lithium-Ion Batteries for Enhanced Lifespan Understanding
    Madani, S. S.; Allard, F.; Shabeer, Y.; Fowler, M.; Panchal, S.; Ziebert, C.; Mekhilef, S.; Dou, S. X.; See, K.; Wang, Z.
    2025. Journal of Physics: Conference Series, 2968 (1), 012017. doi:10.1088/1742-6596/2968/1/012017
  27. Phase Equilibria in the V-Rich Region of the V-Si-B System at 1400 °C
    Yang, W.; Hasemann, G.; Carrion Saldaña, M.; Gorr, B.; Schwaiger, R.; Krüger, M.
    2025. Journal of Phase Equilibria and Diffusion, 46 (1), 151–169. doi:10.1007/s11669-025-01177-4
  28. The W7-X ECRH gyrotron diamond output window: Oil and water cooled window performance at 1.5 MW operation
    Aiello, G.; Gantenbein, G.; Gorr, B.; Jelonnek, J.; Laqua, H. P.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Thumm, M.
    2025. Fusion Engineering and Design, 211, 114814. doi:10.1016/j.fusengdes.2025.114814
  29. Fabrication of Smooth, Periodic Surface Structures: Combining Direct Laser Interference Patterning and Electropolishing
    Schäfer, C.; Delfino, P. M.; Leonhard-Trautmann, P.; Ott, V.; Suarez, S.; Stüber, M.; Mücklich, F.; Pauly, C.
    2025. Advanced Engineering Materials, 27 (3), Art.-Nr.: 2400435. doi:10.1002/adem.202400435
  30. RuAl Thin‐Film Deposition by DC Magnetron Sputtering
    Ott, V.; Wojcik, T.; Kolozsvari, S.; Polcik, P.; Schäfer, C.; Pauly, C.; Mücklich, F.; Ulrich, S.; Mayrhofer, P. H.; Riedl, H.; Stüber, M.
    2025. Advanced Engineering Materials, 27 (3). doi:10.1002/adem.202400258
  31. Laser printing of silicon-containing multilayer anodes with optimized electrode inks
    Rist, U.
    2025, January 29. 19th Laser-based Micro- and Nanoprocessing (LASE 2025), San Francisco, CA, USA, January 25–31, 2025
  32. Heterogene Gleichgewichte und Thermodynamische Untersuchungen in den Systemen Ga-Li und Ga-Li-Sn. PhD dissertation
    Fels, J.
    2025, January 29. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000178474
  33. Ultrafast laser ablation of high-voltage cathodes using GHz burst mode operation
    Reinhold, C.
    2025, January 27. 19th Laser-based Micro- and Nanoprocessing (LASE 2025), San Francisco, CA, USA, January 25–31, 2025
  34. Optimizing and upscaling of USP laser structuring for 3D lithium-ion battery electrodes for fast-charging and reduced lithium plating
    Sterzl, Y.; Pfleging, W.
    2025, January 27. 19th Laser-based Micro- and Nanoprocessing (LASE 2025), San Francisco, CA, USA, January 25–31, 2025
  35. Gigahertz laser ablation of lithium nickel manganese cobalt oxide for lithium-ion batteries
    Straßburger, N.
    2025, January 27. 19th Laser-based Micro- and Nanoprocessing (LASE 2025), San Francisco, CA, USA, January 25–31, 2025
  36. Thermodynamics, constitution and kinetics in the Mo-Si-Ti system. PhD dissertation
    Czerny, A. K.
    2025, January 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000177734
  37. Towards Sustainable Direct Recycling: Unraveling Structural Degradation Induced by Thermal Pretreatment of Lithium‐Ion Battery Electrodes
    Liu, S.; Dolotko, O.; Bergfeldt, T.; Knapp, M.; Ehrenberg, H.
    2025. ChemSusChem, 18 (1), Art.-Nr: e202400727. doi:10.1002/cssc.202400727
  38. A Comprehensive Review on Lithium-Ion Battery Lifetime Prediction and Aging Mechanism Analysis
    Madani, S. S.; Shabeer, Y.; Allard, F.; Fowler, M.; Ziebert, C.; Wang, Z.; Panchal, S.; Chaoui, H.; Mekhilef, S.; Dou, S. X.; See, K.; Khalilpour, K.
    2025. Batteries, 11 (4), Art.-Nr.: 127. doi:10.3390/batteries11040127
  39. Aging Behavior Beyond SOH 80: An Experimental Aging Study on Commercial Lithium–Ion Batteries with Different Cathode Materials: Capacity Loss, Resistance Change and Impedance Modeling
    Ohneseit, S.; Holocher, M. C.; Kalk, A.; Uhlmann, N.; Seifert, H. J.; Ziebert, C.
    2025. Batteries and Supercaps. doi:10.1002/batt.202400713
  40. Microstructure of CuCrZrV and ODS(Y2O3)-Cu Alloys After Neutron Irradiation at 150, 350, and 450 °C to 2.5 dpa
    Klimenkov, M.; Bonnekoh, C.; Jaentsch, U.; Rieth, M.; Schneider, H.-C.; Terentyev, D.; Iroc, K.; Van Renterghem, W.
    2025. Materials, 18 (7), Article no: 1401. doi:10.3390/ma18071401
  41. Tuning Li occupancy and local structures for advanced Co-free Ni-rich positive electrodes
    Li, H.; Liu, H.; Luo, S.; Arbiol, J.; Suard, E.; Bergfeldt, T.; Missyul, A.; Baran, V.; Mangold, S.; Zhang, Y.; Hua, W.; Knapp, M.; Ehrenberg, H.; Pan, F.; Indris, S.
    2025. Nature Communications, 16 (1), 2203. doi:10.1038/s41467-025-57063-7
  42. Ceramic breeder blankets
    Hernández, F. A.; Gaisin, R.; Ghidersa, B. E.; Knitter, R.; Neuberger, H.; Spagnuolo, G. A.; Vladimirov, P.; Zhou, G.
    2025. Fusion Energy Technology R&D Priorities. Ed.: L. El-Guebaly, 225–234, Elsevier. doi:10.1016/B978-0-443-13629-0.00029-0
  43. Ab initio study of helium in titanium beryllides
    Bachurin, D. V.; Stihl, C.; Vladimirov, P. V.
    2025. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000178522
  44. Tungsten alloys R&D program at KIT
    Rieth, M.; Antusch, S.; Bonnekoh, C.; Hoffmann, A.; Knabl, W.; Lied, P.
    2025. Fusion energy technology R&D priorities. Ed.: L.A. El-Guebaly, 53–60, Elsevier. doi:10.1016/B978-0-443-13629-0.00006-X
  45. Steigerung der thermischen Stabilität von warm- und kaltgewalztem Wolfram durch Kalium-Dotierung für die Fusionsenergietechnik. PhD dissertation
    Lied, P.
    2025. doi:10.5445/KSP/1000169486
  46. 29th International QUENCH Workshop
    Steinbrück, M. (Ed.)
    2024. Karlsruher Institut für Technologie (KIT)
  47. Influence of electrode transparency on the plasma properties of a cylindrical IEC plasma source
    Tiedemann, D.; Emmerlich, J.; Herdrich, G.; Müller, M.; Ulrich, S.
    2024. Vacuum, 230, 113711. doi:10.1016/j.vacuum.2024.113711
  48. An experimental and comparative study on passive and active PCM cooling of a battery with/out copper mesh and investigation of PCM mixtures
    Samancıoğlu, U. E.; Göçmen, S.; Madani, S. S.; Ziebert, C.; Nuno, F.; Huang, J.; Gao, F.; Çetkin, E.
    2024. Journal of Energy Storage, 103, 114262. doi:10.1016/j.est.2024.114262
  49. Bridge-grafted EG/BCN encapsulated PW with effectively improved thermal conductivity and battery thermal management performance
    Hui, S.; Zhang, H.; Xu, G.; Zhang, J.; Xu, F.; Sun, L.; Lin, X.; Ma, L.; Peng, H.; Li, B.; Yan, E.; Seifert, H. J.
    2024. Journal of Energy Storage, 104, 114661. doi:10.1016/j.est.2024.114661
  50. Corrigendum to “The brittle-to-ductile transition in cold-rolled tungsten sheets: Contributions of grain and subgrain boundaries to the enhanced ductility after pre-deformation” [Nucl. Mater. Energy 25 (2020) 100769]
    Bonnekoh, C.; Lied, P.; Zaefferer, S.; Jäntsch, U.; Hoffmann, A.; Reiser, J.; Rieth, M.
    2024. Nuclear Materials and Energy, 41, Art.-Nr.: 101833. doi:10.1016/j.nme.2024.101833
  51. A comparative study of commercial automotive prismatic Li-ion cells using nail penetration test, differential scanning calorimetry and thermogravimetric analysis
    Kim, H.; Seifert, H. J.; Ziebert, C.; Finster, P.; Friedl, J.
    2024. Journal of Power Sources, 623, Art.-Nr.: 235416. doi:10.1016/j.jpowsour.2024.235416
  52. W-EUROFER97 brazed joints using Ag, Au, and Cu-based fillers for energy applications: A microstructural and mechanical study
    Díaz-Mena, V.; de Prado, J.; Izaguirre, I.; Carreras, J.; Sánchez, M.; Rieth, M.; Ureña, A.
    2024. Journal of Nuclear Materials, 601, Art.-Nr.: 155332. doi:10.1016/j.jnucmat.2024.155332
  53. Phase formation, structure and properties of quaternary MAX phase thin films in the Cr-V-C-Al system: A combinatorial study
    Tang, C.; Dürrschnabel, M.; Jäntsch, U.; Klimenkov, M.; Steinbrück, M.; Ulrich, S.; Hans, M.; Schneider, J. M.; Stüber, M.
    2024. Journal of the European Ceramic Society, 44 (15), Art.-Nr.: 116763. doi:10.1016/j.jeurceramsoc.2024.116763
  54. Overcoming Fundamental Barriers for Novel Refractory High Temperature Candidate Alloys
    Kauffmann, A.; Obert, S.; Schliephake, D.; Hinrichs, F.; Winkens, G.; Falcão, G.; Eusterholz, M.; Tirunilai, A. S.; Gombola, C.; Thota, H.; Cong, X.; Beichert, B.; Kramer, L. K.; Gorr, B.; Christ, H.-J.; Eggeler, Y.; Galetz, M. C.; Inui, H.; Heilmaier, M.
    2024, November 28. Seminar des Lehrstuhls für Allgemeine Werkstoffeigenschaften, Friedrich-Alexander-Universität Erlangen Erlangen-Nürnberg (2024), Erlangen, Germany, November 28, 2024
  55. High-temperature single-rod tests on the oxidation of Cr coated cladding tubes, carried out at KIT within the IAEA project ATF-TS
    Stuckert, J.; Peters, U.; Stegmaier, U.; Vizelkova, K.; Vogel, E.
    2024, November 19. 29th International QUENCH Workshop (2024), Karlsruhe, Germany, November 19–21, 2024
  56. Development of three-dimensional lithium-ion cells with water-based thick-film cathodes using ultrafast laser ablation. PhD dissertation
    Zhu, P.
    2024, November 7. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000175921
  57. Partikelbasierte Methoden für die Berechnung von effektiven Transporteigenschaften und Mechanik in granularen Mehrphasen-Elektroden. PhD dissertation
    Wahn, A.
    2024, November 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000175740
  58. Studies on 3D printing of Na3Zr2Si2PO12 ceramic solid electrolyte through Fused Filament Fabrication
    Kutlu, A. C.; Nötzel, D.; Hofmann, A.; Ziebert, C.; Seifert, H. J.; Mohsin, I. U.
    2024. Electrochimica Acta, 503, Art.-Nr.: 144881. doi:10.1016/j.electacta.2024.144881
  59. Revealing the disrupted Li/vacancy structure in Co, Mg, and Al co-doped ultra-high Ni-rich cathodes
    Li, H.; Hua, W.; Missyul, A.; Bergfeldt, T.; Knapp, M.; Ehrenberg, H.; Pan, F.; Indris, S.
    2024. Journal of Materials Chemistry A, 12 (42), 28711–28715. doi:10.1039/d4ta03871a
  60. Ni–Cu Bimetallic Oxides with Tailored Morphology for High‐Performance Alkaline Water Oxidation
    Tabassum, A.; Ata, S.; Ding, Y.; Mohsin, I. U.; Leghari, S. A. K.; Al-Kahtani, A. A.; Nafady, A.; Sohail, M.
    2024. ChemistrySelect, 9 (39), e202403451. doi:10.1002/slct.202403451
  61. Laser Ablation of Electrodes for Next Generation Batteries
    Pfleging, W.; Sterzl, Y.; Rist, U.; Reinhold, C.; Straßburger, N.; Meyer, A.; Zhu, P.
    2024, October 3. 17th International Conference on Laser Ablation (COLA 2024), Hersonissos, Greece, September 29–October 4, 2024
  62. Modelling the morphology of hydrides in fuel rod cladding under the conditions of the long-term bundle test in the framework of the SPIZWURZ project
    Kolesnik, M.; Stuckert, J.; Grosse, M.
    2024. Proceedings of TopFuel 2024, Grenoble, 29th September - 3rd October 2024, paper 35
  63. Investigations of the SPIZWURZ bundle after the 250 day-long dry-storage simulation
    Weick, S.; Grosse, M.; Roessger, C.; Stuckert, J.
    2024. Proceedings of TopFuel 2024, Article no: 166
  64. Experimental programme within the IAEA ATF-TS - separate effect and bundle tests with ATF cladding materials
    Ševeček, M.; Stuckert, J.; Sim, K.; Khaperskaia, A.
    2024. TopFuel 2024 Reactor Fuel Performance : 29 September-3 October 2024, Grenoble, France, paper 235
  65. Behavior of bundles with Cr coated claddings under BDBA conditions at the DEGREE facility
    Nakamura, K.; Inagaki, K.; Stuckert, J.; Ševeček, M.; Tarumi, N.
    2024. TopFuel 2024 Reactor Fuel Performance : 29 September-3 October 2024, Grenoble, France, paper 261
  66. IAEA ATF-TS Benchmark for simulation of bundle tests
    Stuckert, J.; Hozer, Z.; Khaperskaia, A.; Sim, K.
    2024. Proceedings of TopFuel 2024, Artikel-Nr.: 119
  67. Characterization of a radially emitting spray jet in a cylindrical inertial electrostatic confinement plasma source based on particle in cell simulation
    Tiedemann, D.; Hofmann, P.; Herdrich, G.; Pflug, A.; Emmerlich, J.; Müller, M.; Ulrich, S.
    2024. Vacuum, 228, Art.-Nr.: 113480. doi:10.1016/j.vacuum.2024.113480
  68. Hydrogen diffusion and trapping in a cryogenic processed high-Cr ferrous alloy
    Jovičević-Klug, P.; Prabhakar, J. M.; Giesbrecht, C. K.; Schwarz, T. M.; Bonnekoh, C.; Rieth, M.; Rohwerder, M.
    2024. npj Materials Degradation, 8 (1), Art.-Nr.: 104. doi:10.1038/s41529-024-00522-1
  69. Impact of neutron irradiation on the tensile properties of advanced EUROFER97-type steels
    Kachko, O.; Puype, A.; Terentyev, D.; Chang, C.-C.; Rieth, M.; Petrov, R. H.
    2024. Journal of Nuclear Materials, 599, Art.-Nr.: 155176. doi:10.1016/j.jnucmat.2024.155176
  70. In-situ TEM investigation of recovery mechanisms in ion-irradiated ITER-grade tungsten
    Iroc, K.; Terentyev, D.; Van Renterghem, W.; Dunatov, T.; Tadić, T.; Klimenkov, M.; Baumier, C.; Gentils, A.; Schryvers, D.
    2024. Journal of Nuclear Materials, 599, Art.-Nr.: 155223. doi:10.1016/j.jnucmat.2024.155223
  71. Advancing laser technology for sustainable energy storage
    Pfleging, W.
    2024, September 18. 5th Congresso de Engenharias e Ciências Aplicadas das Três Fronteiras (2024), Foz do Iguaçu, Brazil, September 17–20, 2024
  72. Microwave characterization of single and polycrystalline diamond with Nb superconducting resonators
    Mazzocchi, F.; Neidig, M.; Kempf, S.; Strauß, D.; Scherer, T.; Yamada, H.
    2024. 2024 49th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Perth, Australia, 1st-6th September 2024, 1–3, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz60956.2024.10697575
  73. New developments of hydrogen impurity online-monitoring in liquid lithium of IFMIF-DONES
    Holstein, N.; Krauss, W.; Konys, J.; Saverio Nitti, F.
    2024. Nuclear Materials and Energy, 40, Art.-Nr.: 101697. doi:10.1016/j.nme.2024.101697
  74. Effect of temperature on mechanical properties of beryllium intermetallic compounds fabricated by plasma sintering
    Hwang, T.; Kim, J.-H.; Sugimoto, Y.; Gaisin, R.; Rolli, R.; Vladimirov, P.; Akatsu, Y.; Yokohama, S.; Nakano, S.; Nakamichi, M.
    2024. Nuclear Materials and Energy, 40, Art.-Nr.: 101686. doi:10.1016/j.nme.2024.101686
  75. Design Progress of Structural Components of the EU DEMO EC Equatorial Launcher
    Spaeh, P.; Bruschi, A.; Chavan, R.; Clément, A.; Crisinel, F.; Cufar, A.; Fanale, F.; Garavaglia, S.; Hogge, J. P.; Sanchez, A. M.; Noël, M.; Rispoli, N.; Strauss, D.; Wu, C.
    2024. IEEE Transactions on Plasma Science, 52 (9), 3580–3585. doi:10.1109/TPS.2024.3353822
  76. Designing advanced high-Cr ferrous alloys for next-generation energy applications through cryogenic processing
    Jovičević-Klug, P.; Bonnekoh, C.; Jovičević-Klug, M.; Ambrožič, B.; Dražić, G.; Miłosz, Z.; Ma, Y.; McCarroll, I.; Breitbach, B.; Amati, M.; Gregoratti, L.; Rieth, M.; Rohwerder, M.
    2024. Applied Surface Science, 665, Art.-Nr. : 160290. doi:10.1016/j.apsusc.2024.160290
  77. Stability of Two-Phase Microstructures in Al-Containing Refractory Compositionally Complex Alloys
    Yang, L.; Sen, S.; Vikram, R. J.; Schliephake, D.; Laube, S.; Pramanik, A.; Chauhan, A.; Gorr, B.; Heilmaier, M.; Kauffmann, A.
    2024, August 20. 32nd International Materials Research Congress (IMRC 2024), Cancún, Mexico, August 18–23, 2024
  78. Interfacial Domino Effect Triggered by β‐Alanine Cations Realized Highly Reversible Zinc‐Metal Anodes
    Guo, G.; Ji, C.; Lin, J.; Wu, T.; Luo, Y.; Sun, C.; Li, M.; Mi, H.; Sun, L.; Seifert, H. J.
    2024. Angewandte Chemie International Edition, 63 (33), Art.-Nr. e202407417. doi:10.1002/anie.202407417
  79. Elucidating the Electrochemical Impact of the Calendering Process on Three-Dimensional Designed Electrodes for Lithium-Ion Batteries
    Straßburger, N.; Zhu, P.; Pfleging, W.
    2024. ECS Meeting Abstracts, MA2024-01 (2), 438. doi:10.1149/MA2024-012438mtgabs
  80. Measurement of Li-Ion Self-Diffusion in Laser Structured Electrodes
    Tambio, S. J.; Deschamps, M.; Pfleging, W.
    2024. ECS Meeting Abstracts, MA2024-01 (1), 176. doi:10.1149/MA2024-011176mtgabs
  81. Next-Generation Batteries through Advanced 3D Electrode and Material Concepts
    Falkowski, V.; Reinhold, C.; Rist, U.; Sterzl, Y.; Pfleging, W.
    2024. ECS Meeting Abstracts, MA2024-01 (1), 93. doi:10.1149/MA2024-01193mtgabs
  82. Conceptual Design of a Modular EC Heating System for EU-DEMO
    Bruschi, A.; Hogge, J.-P.; Jelonnek, J.; Strauss, D.; Wu, C.; Aiello, G.; Avramidis, K.; Baiocchi, B.; Birlan, D.; Chavan, R.; Chelis, I.; Clement, A.; Collaku, A.; Crisinel, F. P.; Difonzo, R.; Ell, B.; Fanale, F.; Fanelli, P.; Figini, L.; Gajetti, E.; Gantenbein, G.; Garavaglia, S.; Goodman, T. P.; Illy, S.; Ioannidis, Z.; Jin, J.; Latsas, G.; Marraco Borderas, C. L.; Marsen, S.; Moro, A.; Noël, M.; Peponis, D.; Pinna, T.; Platania, P.; Rispoli, N.; Ruess, T.; Rzesnicki, T.; Salvitti, A.; Savoldi, L.; Scherer, T.; Schreck, S.; Simonetto, A.; Spaeh, P.; Stanculovic, S.; Stange, T.; Thumm, M.; Tigelis, I. G.; Tsironis, C.; Wagner, D.; Xydou, A.
    2024. Nuclear Fusion, 54 (10), Art.-Nr.: 106003. doi:10.1088/1741-4326/ad66e3
  83. Microstructural changes induced in advanced tungsten grades under high temperature neutron irradiation
    Renterghem, W. Van; Iroc, K.; Terentyev, D.; Antusch, S.; Rieth, M.
    2024. International Journal of Refractory Metals and Hard Materials, 122, Art.-Nr.: 106718. doi:10.1016/j.ijrmhm.2024.106718
  84. An Overview of Mechanisms of the Degradation of Promising ATF Cladding Materials During Oxidation at High Temperatures
    Steinbrueck, M.; Grosse, M.; Tang, C.; Stuckert, J.; Seifert, H. J.
    2024. High Temperature Corrosion of Materials, 101 (4), 621–647. doi:10.1007/s11085-024-10229-y
  85. Addressing Mechanical and Electrochemical Aging of Cylindrical LFP Battery Cells by Laser Structuring of Electrodes
    Sterzl, Y.; Xiao, S.; Pulst, M.; Pfleging, W.
    2024, July 31. 13th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (IEEE 3M-NANO 2024), Zhongshan, China, July 29–August 2, 2024
  86. Laser-Induced Forward Transfer – Current Approaches and Perspectives for 4D Printing of Batteries
    Rist, U.; Pfleging, W.
    2024, July 31. 13th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (IEEE 3M-NANO 2024), Zhongshan, China, July 29–August 2, 2024
  87. Laser Engineering of Surfaces, Interfaces, and Nanomaterials for Lithium-Ion Batteries
    Pfleging, W.
    2024, July 31. 13th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (IEEE 3M-NANO 2024), Zhongshan, China, July 29–August 2, 2024
  88. Influence of Vinylene Carbonate and Fluoroethylene Carbonate on Open Circuit and Floating SoC Calendar Aging of Lithium-Ion Batteries
    Geuder, K.; Klick, S.; Finster, P.; Graff, K. M.; Winter, M.; Nowak, S.; Seifert, H. J.; Ziebert, C.
    2024. Batteries, 10 (8), Art.-Nr.: 275. doi:10.3390/batteries10080275
  89. Laser-Induced Forward Transfer – Current Approaches and Perspectives for 4D Printing of Batteries
    Rist, U.; Pfleging, W.
    2024. 2024 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), Zhongshan, China, 29 July 2024 - 02 August 2024, 320–325, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO61605.2024.10769702
  90. Addressing Mechanical and Electrochemical Aging of Cylindrical LFP Battery Cells by Laser Structuring of Electrodes
    Sterzl, Y.; Xiao, S.; Pulst, M.; Pfleging, W.
    2024. 2024 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 223–227, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO61605.2024.10769635
  91. Decoding the oxidation mechanism of Zircaloy-4 via in situ synchrotron X-ray diffraction and computational elucidation
    Wang, S.; Lu, L.; Rahemtulla, A.; Huttula, M.; Steinbrück, M.; Singh, H.
    2024. Journal of Alloys and Compounds, 992, Art.-Nr.: 174554. doi:10.1016/j.jallcom.2024.174554
  92. Laser + Photonics for Advanced Manufacturing (Front Matter: Volume 13005)
    Lecler, S.; Pfleging, W.; Courvoisier, F. (Eds.)
    2024. Laser + Photonics for Advanced Manufacturing : 8-11 April 2024, Strasbourg, France. Eds.: François Courvoisier, Sylvain Lecler, Wilhelm Pfleging, SPIE. doi:10.1117/12.3037954
  93. Ultrakurzpuls-Laserstrukturierung von Kompositelektroden für die Entwicklung von 3D-Batterien der nächsten Generation
    Pfleging, W.
    2024, July 2. 5th DVG-Mitgliederkontakttag "Moderne Oberflächentechnik: Beschichtung, Lasertechnik, Analytik" (2024), Kaiserslautern, Germany, July 2–3, 2024
  94. Electromagnetic analysis on conceptual design of the EU DEMO EC equatorial laucher
    Pagani, I.; Maione, I. A.; Spaeh, P.; Lucca, F.
    2024. Fusion Engineering and Design, 204, Art.-Nr.: 114493. doi:10.1016/j.fusengdes.2024.114493
  95. Corrosion behavior and mechanical properties of V–4Cr–4Ti alloy exposed at 500 and 700 °C to static Pb with ∼10^{–9} mass% dissolved oxygen for 1000 h
    Tsisar, V.; Nagasaka, T.; Yeliseyeva, O.; Lim, J.; Konys, J.; Muroga, T.; Schroer, C.
    2024. Journal of Nuclear Materials, 595, Article no: 155052. doi:10.1016/j.jnucmat.2024.155052
  96. Ultrafast laser ablation of high-voltage cathodes for next generation 3D lithium-ion batteries
    Reinhold, C.; Pfleging, W.
    2024. Laser and Photonics for Advanced Manufacturing. Ed.: F. Courvoisier, 19, SPIE. doi:10.1117/12.3022349
  97. Hierarchical structuring of cathodes and anodes for lithium-ion batteries
    Straßburger, N.; Zhu, P.; Pfleging, W.
    2024. S. Lecler, W. Pfleging & F. Courvoisier (Eds.), Laser + Photonics for Advanced Manufacturing, 20, SPIE. doi:10.1117/12.3022446
  98. Laserstrukturierung von Silizium-Graphit-Anoden für Lithium-Ionen-Batterien der nächsten Generation. PhD dissertation
    Zheng, Y.
    2024, June 19. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000170881
  99. Recent Progress of Deep Learning Methods for Health Monitoring of Lithium-Ion Batteries
    Madani, S. S.; Ziebert, C.; Vahdatkhah, P.; Sadrnezhaad, S. K.
    2024. Batteries, 10 (6), Art.-Nr.: 204. doi:10.3390/batteries10060204
  100. Perspective of Laser Technology Empowering Lithium-Ion Batteries
    Pfleging, W.; Sterzl, Y.; Rist, U.; Reinhold, C.; Straßburger, N.; Falkowski, V.; Meyer, A.; Zhu, P.
    2024, June 11. 25th International Symposium on Laser Precision Microfabication (LPM 2024), San Sebastián, Spain, June 11–14, 2024
  101. Influence of oxygen content on the corrosion behavior of MoSiTi and AlCrTiMoTa alloys in liquid lead at 650 °C
    Martini, F.; Schroer, C.; Hetzler, S.; Gorr, B.
    2024, June. 11th International Symposium on High Temperature Corrosion and Protection of Materials (2024), Les Embiez, France, June 9–14, 2024
  102. Additive manufacturing of novel complex tungsten components via electron beam melting: Basic properties and evaluation of the high heat flux behavior
    Antusch, S.; Klein, A.; Baumgärtner, S.; Bonnekoh, C.; Böswirth, B.; Dorow-Gerspach, D.; Dietrich, S.; Ehrhardt, M.; Ghidersa, B. E.; Greuner, H.; Guttmann, M.; Hanemann, T.; Jung, J.; Konrad, J.; Rieth, M.
    2024. Nuclear Materials and Energy, 39, Art.-Nr.: 101683. doi:10.1016/j.nme.2024.101683
  103. Harnessing Regenerated Graphite from Spent Lithium‐Ion Batteries to Enhance the Performance of Sulfur Cathode in Lithium‐Sulfur Batteries
    Sheng, H.; Graczyk-Zajac, M.; Tian, H.; Qu, F.; Zhang, Y.; Dürrschnabel, M.; Weidenkaff, A.; Riedel, R.
    2024. Batteries & Supercaps, 7 (6), Art.-Nr.: e202400003. doi:10.1002/batt.202400003
  104. In-Situ synchrotron investigation of elastic and tensile properties of oxide dispersion strengthened EUROFER97 steel for advanced fusion reactors
    Sparks, T.; Kuksenko, V.; Gorley, M.; Hoffmann, J.; Chiu, Y.-L.; Connolley, T.; Rieth, M.; Wang, Y.; Cai, B.
    2024. Acta Materialia, 271, 119876. doi:10.1016/j.actamat.2024.119876
  105. Steady laminar stagnation flow NH3-H2-air flame at a plane wall: Flame extinction limit and its influence on the thermo-mechanical stress and corrosive behavior of wall materials
    Yu, C.; Srikanth, S.; Böhlke, T.; Gorr, B.; Maas, U.
    2024. Applications in Energy and Combustion Science, 18, 100261. doi:10.1016/j.jaecs.2024.100261
  106. High-Temperature Corrosion Behavior of Fe-18Ni-12Cr-2.9Al and Fe-18Ni-12Cr-2.3Al-Nb-C Austenitic Steels Depending on Dissolved Oxygen Concentration in Static Liquid Pb at 700 °C
    Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.; Schroer, C.
    2024. High Temperature Corrosion of Materials, 101 (3), 589–602. doi:10.1007/s11085-024-10233-2
  107. Lithium-Ion Battery Thermal Runaway: Experimental Analysis of Particle Deposition in Battery Module Environment
    Hoelle, S.; Kim, H.; Zimmermann, S.; Hinrichsen, O.
    2024. Batteries, 10 (6), Art.-Nr. 173. doi:10.3390/batteries10060173
  108. Revealing the mechanism of reductive, mechanochemical Li recycling from LiFePO
    Geiß, D.; Dolotko, O.; Indris, S.; Neemann, C.; Bologa, A.; Bergfeldt, T.; Knapp, M.; Ehrenberg, H.
    2024. RSC Mechanochemistry, 1 (4), 349–360. doi:10.1039/d4mr00014e
  109. Revealing the mechanism of reductive, mechanochemical Li recycling from LiFePO4
    Geiß, D.; Dolotko, O.; Indris, S.; Neemann, C.; Bologa, A.; Bergfeldt, T.; Knapp, M.; Ehrenberg, H.
    2024, May 16. doi:10.35097/1912
  110. Understanding the Electrochemical Reaction Mechanism of the Co/Ni Free Layered Cathode Material P2–NaMnFeTiO for Sodium-Ion Batteries
    Peng, J.; Sarapulova, A.; Fu, Q.; Li, H.; Liu, H.; Dolotko, O.; Bergfeldt, T.; Kleiner, K.; Ying, B.; Wu, Y.; Baran, V.; Welter, E.; Nagel, P.; Schuppler, S.; Merz, M.; Knapp, M.; Ehrenberg, H.; Indris, S.
    2024. Chemistry of Materials, 36 (9), 4107–4120. doi:10.1021/acs.chemmater.3c01552
  111. Battery thermal management system for greater lifetime and safety: mini-review
    Madani, S.; Hajihosseini, M.; Ziebert, C.; Nandhakumar, I.
    2024. 23rd International Scientific Conference Engineering for Rural Development Proceedings, Mitau, 22nd-24th May 2024, 1073 – 1089, Latvia University of Life Sciences and Technologies, Faculty of Engineering and Information Technologies. doi:10.22616/ERDev.2024.23.TF225
  112. Optimizing Structural Patterns for 3D Electrodes in Lithium-Ion Batteries for Enhanced Fast-Charging Capability and Reduced Lithium Plating
    Sterzl, Y.; Pfleging, W.
    2024. Batteries, 10 (5), Art.-Nr.: 160. doi:10.3390/batteries10050160
  113. Exploring the reactivity of Na₃V₂(PO4)₃/C and hard carbon electrodes in sodium-ion batteries at various charge states
    Mohsin, I. U.; Hofmann, A.; Ziebert, C.
    2024. Electrochimica Acta, 487, Article no: 144197. doi:10.1016/j.electacta.2024.144197
  114. Micro-mechanisms of the ductile-to-brittle transition in hydrogenated zirconium alloys: A review and a comparison analysis of experimental data and theoretical approaches
    Kolesnik, M.
    2024. Engineering Failure Analysis, 159, Art.-Nr.: 108110. doi:10.1016/j.engfailanal.2024.108110
  115. Giant Critical Thickness in Highly Conducting Epitaxial SrMoO Electrodes Investigated by Lift‐Off Membranes
    Ruan, Y.; Schreyer, P.; Jiang, T.; Liang, F.; Arzumanov, A.; Dürrschnabel, M.; Molina-Luna, L.; Komissinskiy, P.; Alff, L.
    2024. Advanced Functional Materials, 34 (21), Art.-Nr.: 2312508. doi:10.1002/adfm.202312508
  116. The electronic, vibrational and dielectric properties of diamond crystals with neutral vacancies: first principles study
    Rusevich, L. L.; Kotomin, E. A.; Popov, A. I.; Aiello, G.; Scherer, T. A.; Lushchik, A.
    2024. Optical Materials, 150, Art.-Nr.: 115222. doi:10.1016/j.optmat.2024.115222
  117. Dependence of the Structural and Magnetic Properties on the Growth Sequence in Heterostructures Designed by YbFeO and BaFeO
    Bauer, S.; Nergis, B.; Jin, X.; Schneider, R.; Wang, D.; Kübel, C.; Machovec, P.; Horak, L.; Holy, V.; Seemann, K.; Baumbach, T.; Ulrich, S.
    2024. Nanomaterials, 14 (8), Art.-Nr.: 711. doi:10.3390/nano14080711
  118. Initial assessment of MELCOR Nitriding Model using Air Ingress Experiments QUENCH-16 and QUENCH-18
    Birchley, J.; Stuckert, J.; Steinbrück, M.
    2024. doi:10.5445/IR/1000170208
  119. Influence of transmutation-induced Re/Os content on defect evolution in neutron-irradiated W
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Schneider, H. C.; Terentyev, D.; Renterghem, W. Van
    2024. Journal of Nuclear Materials, 592, Art.-Nr.: 154950. doi:10.1016/j.jnucmat.2024.154950
  120. Post-quench ductility limits of coated ATF with various zirconium-based alloys and coating designs
    Joung, S.; Kim, J.; Ševeček, M.; Stuckert, J.; Lee, Y.
    2024. Journal of Nuclear Materials, 591, Article no: 154915. doi:10.1016/j.jnucmat.2024.154915
  121. Front Matter: Volume 12873, Laser-based Micro- and Nanoprocessing XVII
    Kling, R.; Pfleging, W.; Sugioka, K. (Eds.)
    2024. Laser-based Micro- and Nanoprocessing XVIII, 29th January – 1st February 2024 San Francisco, California, United States. Eds.: Rainer Kling, Wilhelm Pfleging, Koji Sugioka, I-VIII S., SPIE. doi:10.1117/12.3029984
  122. Aufbau und Eigenschaften von Schutzschichten im System Ti-Zr-C-H, hergestellt mittels reaktiver Hochleistungsimpuls-Magnetronkathodenzerstäubung. PhD dissertation
    Poltorak, C.
    2024, March 18. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000169165
  123. Ultrafast laser structuring of high-voltage cathode materials for lithium-ion batteries
    Reinhold, C.; Pfleging, W.
    2024. SPIE Photonics West LASE 2024, Laser-based Micro- and Nanoprocessing XVIII, San Francisco, CA, 27th January -1st February 2024, 36, SPIE. doi:10.1117/12.3001737
  124. An electrode design study: laser structuring of anodes for fast-charging of batteries
    Sterzl, Y.; Pfleging, W.
    2024. R. Kling, W. Pfleging & K. Sugioka (Eds.), SPIE Photonics West LASE 2024, Laser-based Micro- and Nanoprocessing XVIII, San Francisco, CA, 27th January -1st February 2024, 38, SPIE. doi:10.1117/12.3002505
  125. Laser-induced forward transfer (LIFT) process for flexible construction of advanced 3D silicon anode designs in high-energy lithium-ion batteries
    Rist, U.; Sterzl, Y.; Pfleging, W.
    2024. R. Kling, W. Pfleging & K. Sugioka (Eds.), SPIE Photonics West LASE 2024, Laser-based Micro- and Nanoprocessing XVIII, San Francisco, CA, 27th January -1st February 2024, 30, SPIE. doi:10.1117/12.3003087
  126. Synthetic diamond for windows of the Heating & Current Drive System of ITER
    Schreck, S.; Aiello, G.; Estebanez, P.; Meier, A.; Scherer, T.; Strauss, D.; Wild, C.; Wörner, E.
    2024, March. 87. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM 2024), Berlin, Germany, March 17–22, 2024
  127. Beyond Limits: A Brief Exploration of Fault Detection and Balancing in Lithium-ion Battery Technology
    Madani, S. S.; Ziebert, C.
    2024. Journal of Physics: Conference Series, 2723 (1), Art.-Nr.: 012012. doi:10.1088/1742-6596/2723/1/012012
  128. Ab-initio simulations of atomic hydrogen interaction with Nb and V at clean and oxygen covered surfaces
    Vazquez Cortes, A.; Day, C.; Stihl, C.; Vladimirov, P. V.
    2024. Nuclear Materials and Energy, 38, Art.-Nr.: 101600. doi:10.1016/j.nme.2024.101600
  129. Room-temperature sputter deposition of gold-colored TiN assisted by niobium bombardment from a bipolar HiPIMS source
    Fernandez-Martinez, I.; Ganesan, R.; Akhavan, B.; Matthews, D. T. A.; Stueber, M.; Bilek, M. M. M.; McKenzie, D. R.
    2024. Journal of Vacuum Science & Technology A, 42 (2), Art.Nr.: 023107. doi:10.1116/6.0003325
  130. Optimisation of ECX permeation barriers towards thicker alumina
    Schroer, C.; Lorenz, J.; Wedemeyer, O.; Skrypnik, A.; Khanchych, K.
    2024. Nuclear Materials and Energy, 38, Art.-Nr.: 101581. doi:10.1016/j.nme.2024.101581
  131. Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system
    Pereira, J. N.; Ott, V.; Afonso, C. R. M.; de Sousa Malafaia, A. M.; Stüber, M.; Greiner, C.; Pinto, H. C.
    2024. Surface and Coatings Technology, 477, Art.-Nr.: 130369. doi:10.1016/j.surfcoat.2023.130369
  132. Needle penetration studies on automotive lithium-ion battery cells: Influence of resistance between can and positive terminal on thermal runaway
    Kim, H.; Sahebzadeh, A.; Seifert, H. J.; Ziebert, C.; Friedl, J.
    2024. Journal of Power Sources, 592, Art.-Nr.: 233902. doi:10.1016/j.jpowsour.2023.233902
  133. The Impact of Structural Pattern Types on the Electrochemical Performance of Ultra-Thick NMC 622 Electrodes for Lithium-Ion Batteries
    Zhu, P.; Ebert, B.; Smyrek, P.; Pfleging, W.
    2024. Batteries, 10 (2), 58. doi:10.3390/batteries10020058
  134. Thermodynamics and experimental investigation of the internal oxidation of Fe-Cr-Al-(Y) alloys. PhD dissertation
    Miran, S.
    2024, January 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167919
  135. Corrosion behavior of various conductive materials in Sb3Sn7 alloy at 450 °C
    Zhang, T.; Fetzer, R.; Heinzel, A.; Weisenburger, A.; Tang, C.; Stüber, M.; Müller, G.
    2024. Corrosion Science, 227, Article no: 111797. doi:10.1016/j.corsci.2023.111797
  136. Steigerung der thermischen Stabilität von warm- und kaltgewalztem Wolfram durch Kalium-Dotierung für die Fusionsenergietechnik. PhD dissertation
    Lied, P.
    2024, January 10. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167076
  137. Tailoring superstructure units for improved oxygen redox activity in Li-rich layered oxide battery’s positive electrodes
    Liu, H.; Hua, W.; Kunz, S.; Bianchini, M.; Li, H.; Peng, J.; Lin, J.; Dolotko, O.; Bergfeldt, T.; Wang, K.; Kübel, C.; Nagel, P.; Schuppler, S.; Merz, M.; Ying, B.; Kleiner, K.; Mangold, S.; Wong, D.; Baran, V.; Knapp, M.; Ehrenberg, H.; Indris, S.
    2024. Nature Communications, 15 (1), Article no: 9981. doi:10.1038/s41467-024-54312-z
  138. Impact of Laser Ablation Strategies on Electrochemical Performances of 3D Batteries Containing Aqueous Acid Processed Li(Ni0.6Mn0.2Co0.2)O2 Cathodes with High Mass Loading
    Zhu, P.; Sterzl, Y.; Pfleging, W.
    2024. Batteries, 10 (10), Article no: 354. doi:10.3390/batteries10100354
  139. Thermodynamic assesment of Cr-Mo-Si system
    Chitra, A. R.; Gorr, B.
    2024. 51st International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD 2024), Mannheim, Germany, May 26–31, 2024
  140. On the characterization of MPA CVD diamond for fracture toughness measurements
    Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
    2024. 49th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Perth, Australia, September 1–6, 2024
  141. On the characterization of MPA CVD diamond for fracture toughness measurements
    Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
    2024. 49th IEEE International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Institute of Electrical and Electronics Engineers (IEEE)
  142. Al-Nb-O Ternary Phase Diagram Evaluation
    Gebauer, J.
    2024. MSI Eureka, 101. doi:10.7121/msi-eureka-10.12750.1.3
  143. Initial characterization of MPA CVD diamond to be investigated by fracture toughness measurements
    Aiello, G.; Bonnekoh, C.; Meier, A.; Scherer, T.; Schreck, S.; Seemann, K.; Strauss, D.
    2024. 87. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM 2024), Berlin, Germany, March 17–22, 2024
  144. A brief survey on heat generation in lithium-ion battery technology
    Madani, S. S.; Hajihosseini, M.; Ziebert, C.
    2024. Renewable Energy and Environmental Sustainability, 9, Art.-Nr.: 9. doi:10.1051/rees/2024006
  145. The Annealing Kinetics of Defects in CVD Diamond Irradiated by Xe Ions
    Kotomin, E. A.; Kuzovkov, V. N.; Lushchik, A.; Popov, A. I.; Shablonin, E.; Scherer, T.; Vasil’chenko, E.
    2024. Crystals, 14 (6), Art.-Nr.: 546. doi:10.3390/cryst14060546
  146. Relevance of Platinum Underlayer Crystal Quality for the Microstructure and Magnetic Properties of the Heterostructures YbFeO/Pt/YSZ(111)
    Bauer, S.; Nergis, B.; Jin, X.; Horák, L.; Schneider, R.; Holý, V.; Seemann, K.; Baumbach, T.; Ulrich, S.
    2024. Nanomaterials, 14 (12), Art.-Nr.: 1041. doi:10.3390/nano14121041
  147. Structural and Morphological Studies of Pt in the As-Grown and Encapsulated States and Dependency on Film Thickness
    Nergis, B.; Bauer, S.; Jin, X.; Horak, L.; Schneider, R.; Holy, V.; Seemann, K.; Ulrich, S.; Baumbach, T.
    2024. Nanomaterials, 14 (8), Art.-Nr.: 725. doi:10.3390/nano14080725
  148. Effects of Realistic Driving Profiles on the Degradation of Lithium-Ion Batteries
    Kalk, A.; Clemens Holocher, M.; Ohneseit, S.; Kupper, C.; Hiller, M.
    2024. 2023 IEEE International Transportation Electrification Conference (ITEC-India), Chennai, 13th-15th December 2023, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ITEC-India59098.2023.10471482
  149. Thermodynamic assessment of the Mo‐Si system
    Czerny, A. K.; Ma, W.; Hausner, C. S.; Franke, P.; Rohde, M.; Seifert, H. J.
    2024. Advanced Engineering Materials, Artk.Nr.: 230208. doi:10.1002/adem.202302085
  150. Investigating Hydrogen in Zirconium Alloys by Means of Neutron Imaging
    Weick, S.; Grosse, M.
    2024. Materials, 17 (4), 781. doi:10.3390/ma17040781
  151. Advancing the State of the Practice in Uncertainty and Sensitivity Methodologies for Severe Accident Analysis in Water Cooled Reactors in the QUENCH-06 Experiment
    International Atomic Energy Agency (IAEA)Advancing the State of the Practice in Uncertainty and Sensitivity Methodologies for Severe Accident Analysis in Water Cooled Reactors in the QUENCH-06 Experiment
    2024
  152. Cover Feature: 3D Printing of Na1.3Al0.3Ti1.7(PO4)3 Solid Electrolyte via Fused Filament Fabrication for All-Solid-State Sodium-Ion Batteries (Batteries & Supercaps 1/2024)
    Kutlu, A. C.; Nötzel, D.; Ziebert, C.; Seifert, H. J.; Ul Mohsin, I.
    2024. Batteries & Supercaps, 7 (1), Art.-Nr.: e202300577. doi:10.1002/batt.202300577
  153. Numerical and experimental development of cupronickel filler brazed joints for divertor and first wall components in DEMO fusion reactor
    Díaz-Mena, V.; Prado, J. de; Roldán, M.; Izaguirre, I.; Sánchez, M.; Rieth, M.; Ureña, A.
    2024. Journal of Nuclear Materials, 588, Art-Nr.: 154830. doi:10.1016/j.jnucmat.2023.154830
  154. Aluminide diffusion coatings for improving the pesting behavior of refractory metals
    Beck, K.; Ulrich, A. S.; Czerny, A. K.; White, E. M. H.; Heilmaier, M.; Galetz, M. C.
    2024. Surface and Coatings Technology, 476, Art.-Nr.: 130205. doi:10.1016/j.surfcoat.2023.130205
  155. 3D Printing of NaAlTi(PO) Solid Electrolyte via Fused Filament Fabrication for All‐Solid‐State Sodium‐Ion Batteries
    Kutlu, A. C.; Nötzel, D.; Ziebert, C.; Seifert, H. J.; Mohsin, I. U.
    2024. Batteries & Supercaps, 7 (1), e202300357. doi:10.1002/batt.202300357
  156. The SPIZWURZ project – Experimental investigations and modeling of the behavior of hydrogen in zirconium alloys under long-term dry storage conditions
    Grosse, M.; Boldt, F.; Herm, M.; Roessger, C.; Stuckert, J.; Weick, S.; Nahm, D.
    2024. Nuclear Engineering and Technology, 56, 824–831. doi:10.1016/j.net.2023.09.027
  157. Enhancing Battery Voltage Prediction with Deep Learning: A Comparative Analysis of LSTM and Traditional Models
    Niakan, M. R.; Hajihosseini, M.; Madani, S. S.; Ziebert, C.
    2023. 2023 IEEE 6th International Conference on Automation, Electronics and Electrical Engineering (AUTEEE), Shenyang, China, 15-17 December 2023, 491–495, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/AUTEEE60196.2023.10408405
  158. Effects of Realistic Driving Profiles on the Degradation of Lithium-Ion Batteries
    Kalk, A.; Holocher, M. C.; Ohneseit, S.; Kupper, C.; Hiller, M.
    2023, December 14. 8th International Transportation Electrification Conference (ITEC India 2023), Chennai, India, December 13–15, 2023
  159. Upscaling of 3D Electrode Architectures for High-Performance EV Batteries
    Pfleging, W.
    2023, December 13. 23 Advanced Automotive Battery Conference (AABC 2023), San Diego, CA, USA, December 11–14, 2023
  160. Latest Advances in Ultrafast Laser Structuring of Next Generation Lithium-ion Battery Electrodes
    Pfleging, W.
    2023, December 8. 1st Sino-German Workshop about "Impact of Siliceous Debris on Aviation Safety" (2023), München/Garching, December 6–8, 2023
  161. Hydrogenation of claddings in the new developed HOKI oven and performance of the long-term bundle test under dry storage conditions in the framework of the SPIZWURZ project
    Stuckert, J.; Rössger, C.; Moch, J.; Grosse, M.; Weick, S.
    2023, December 5. 28th International QUENCH Workshop (2023), Karlsruhe, Germany, December 5–7, 2023
  162. 28th International QUENCH Workshop : 5-7 December 2023, Karlsruhe Institute of Technology, Karlsruhe, Germany
    Steinbrück, M. (Ed.)
    2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000165938
  163. The oxidation behavior and reaction thermodynamics and kinetics of the Mg-X (X = Ca/Gd/Y) binary alloys
    Wu, J.; Yuan, Y.; Chen, T.; Tang, A.; Wu, L.; Li, D.; Steinbrück, M.; Pan, F.
    2023. Corrosion Science, 225, Art.-Nr.: 111609. doi:10.1016/j.corsci.2023.111609
  164. Compatibility of EUROFER97 and lead–lithium eutectic
    Khanchych, K.; Schroer, C.
    2023. Nuclear Materials and Energy, 37, Art.-Nr.: 101527. doi:10.1016/j.nme.2023.101527
  165. Evaluation of the delayed hydrogen cracking behavior and the hydrogen diffusion coefficient for different microstructures of the Zr-2.5%Nb alloy
    Gómez, A. G.; Ponce, J. P.; Grosse, M.; Soria, S.; Condó, A.; Flores, A.; Schulz, M.; Vizcaíno, P.; Santisteban, J. R.
    2023. Journal of Nuclear Materials, 587, Art.Nr.:154725. doi:10.1016/j.jnucmat.2023.154725
  166. KIT reactor safety research for LWRs: Research lines, numerical tools, and prospects
    Sanchez-Espinoza, V. H.; Gabrielli, F.; Imke, U.; Zhang, K.; Mercatali, L.; Huaccho, G.; Duran, J.; Campos, A.; Stakhanova, A.; Murat, O.; Mercan, A. K.; Etcheto, J.; Steinbrück, M.; Stuckert, J.; Gabriel, S.; Ottenburger, S.; Stieglitz, R.; Tromm, W.
    2023. Nuclear Engineering and Design, 414, Art.-Nr.: 112573. doi:10.1016/j.nucengdes.2023.112573
  167. Influence of the oxidation on the optical properties of Mo-Si-Ti, Ta-Mo-Cr-Al and Ta-Mo-Cr-Ti-Al alloys
    Charpentier, L.; Kauffmann, A.; Bêche, E.; Escape, C.; Laube, S.; Schliephake, D.; Esvan, J.; Gorr, B.; Soum-Glaude, A.; Heilmaier, M.
    2023. Materials Today Communications, 37, Art.-Nr.: 107056. doi:10.1016/j.mtcomm.2023.107056
  168. Entwicklung einer Niederdruck Plasmaquelle nach dem Prinzip des elektrostatischen Trägheitseinschlusses zur Oberflächenbehandlung in industriellen Anwendungen. PhD dissertation
    Tiedemann, D.
    2023, November 17. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000164434
  169. Development of Refractory Metal-based CCAs with Improved Mechanical Properties
    Laube, S.; Schellert, S.; Kauffmann, A.; Gorr, B.; Eggeler, Y. M.; Christ, H.-J.; Heilmaier, M.
    2023, November 13. 3rd World Congress on High Entropy Alloys (HEA 2023), Pittsburgh, PA, USA, November 12–15, 2023
  170. Safety Analysis and Heat Generation Measurement during Cycling of Sodium-ion Batteries (SIBs)
    Mohsin, I. ul; Ziebert, C.
    2023, November 6. 13th Annual Battery Safety Summit (2023), Tysons Corner, VA, USA, November 6–7, 2023
  171. Simultan betriebene Hohlkathodenentladungen zur Deposition von wasserstoffhaltigen amorphen Kohlenstoffschichten in Sacklochgeometrien. PhD dissertation
    Gryga, R. P.
    2023, November 6. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000163582
  172. Thermodynamic modeling of the Al–Cr–Mo–Ni system
    Peng, J.; Huang, W.; Xu, M.; Wang, S.; Xu, Z.; Li, W.; Wang, J.; Wang, C.; Franke, P.; Seifert, H. J.
    2023. AIP Advances, 13 (11), Art.-Nr.: 115022. doi:10.1063/5.0176225
  173. Process Development of a Generative Method for Partial and Controlled Integration of Active Substances into Open-Porous Matrix Structures
    Burger, L.; Conzelmann, A.; Ulrich, S.; Mozaffari-Jovein, H.
    2023. Materials, 16 (21), Art.-Nr.: 6985. doi:10.3390/ma16216985
  174. High repetition ultrafast laser ablation of graphite and silicon/graphite composite electrodes for lithium-ion batteries
    Meyer, A.; Sterzl, Y.; Pfleging, W.
    2023. Journal of Laser Applications, 35 (4), Art.-Nr.: 042036. doi:10.2351/7.0001180
  175. Diamond dielectric characterization with superconducting LC micro-resonators
    Mazzocchi, F.; Straus, D.; Strauß, D.
    2023. 2023 48th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Montreal, QC, 17th-22nd September 2023, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz57677.2023.10299007
  176. Oxidationsverhalten und Kriechwiderstand von gerichtet erstarrten eutektischen Legierungen im System NiAl-Cr-Mo. PhD dissertation
    Sprenger, I.
    2023, October 27. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000163232
  177. Online pressure and gas analysis of lithium-ion cells during abuse tests
    Ziebert, C.
    2023. Open Access Government, 40 (1), 502–503. doi:10.56367/OAG-040-10412
  178. Optimisation of ECX permeation barriers towards thicker alumina
    Schroer, C.; Lorenz, J.; Wedemeyer, O.; Skrypnik, A.; Khanchych, K.
    2023, October 24. 21st International Conference on Fusion Reactor Materials (ICFRM 2023), Granada, Spain, October 22–27, 2023
  179. Engineering Active Sites Enriched 2D-on-1D NiFe and NiCo Layered Double Hydroxide-Decorated Ni Nanowire Networks for Oxygen Evolution Reaction
    Amin, K. M.; Lin, K.-H.; Duerrschnabel, M.; Molina-Luna, L.; Ensinger, W.
    2023. ACS Sustainable Chemistry & Engineering, 11 (42), 15410–15422. doi:10.1021/acssuschemeng.3c04505
  180. Mechanism and thermal effects of phytic acid-assisted porous carbon sheets for high-performance lithium–sulfur batteries
    Cheng, R.; Liu, J.; Manasa, P.; Zhou, M.; Guan, Y.; Zhang, K.; Lin, X.; Rosei, F.; Pimerzin, A. A.; Seifert, H. J.; Xu, F.; Sun, L.; Cai, D.; Zeng, J.; Cao, Z.; Pan, H.
    2023. Inorganic Chemistry Frontiers, 10, 7038–7053. doi:10.1039/D3QI01926H
  181. Electrochemical Performance of Lithium-Ion Pouch Cells Containing Aqueous Processed and Laser Structured Thick Film NMC 622 and Graphite Electrodes
    Zhu, P.; Sterzl, Y.; Pfleging, W.
    2023, October 11. 244th ECS Meeting (2023), Gothenburg, Sweden, October 8–12, 2023
  182. Ultrafast Laser Patterning of Silicon/Graphite Composite Electrodes to Boost Battery Performance
    Meyer, A.; Pfleging, W.
    2023, October 10. 244th ECS Meeting (2023), Gothenburg, Sweden, October 8–12, 2023
  183. Laser-Induced Printing of Next Generation Silicon-Graphite Anodes for the Development of Advanced Lithium-Ion Batteries
    Rist, U.; Sterzl, Y.; Falkowski, V.; Pfleging, W.
    2023, October 10. 244th ECS Meeting (2023), Gothenburg, Sweden, October 8–12, 2023
  184. Effect of Underlayer Quality on Microstructure, Stoichiometry, and Magnetic Properties of Hexaferrite BaFe₁₂O₁₉ Grown on YSZ(111) by Pulsed Laser Deposition
    Bauer, S.; Nergis, B.; Jin, X.; Schneider, R.; Wang, D.; Kübel, C.; Holy, V.; Horak, L.; Seemann, K.; Ulrich, S.; Baumbach, T.
    2023. Langmuir, 39 (40), 14308–14327. doi:10.1021/acs.langmuir.3c01618
  185. Zn/Mn co‐doped NiO synthesized by sol‐gel route for the photocatalytic degradation of methylene blue dye
    Ata, S.; Zaheer, W.; Tabassum, A.; Ul Mohsin, I.; Altaf, I.; ur Rehman, A.; Al Huwayz, M.; Alwadai, N.; Nazir, A.; Iqbal, M.
    2023. ChemistrySelect, 8 (37), Art.-Nr.: e202301940. doi:10.1002/slct.202301940
  186. Conceptual design of a modular EC system for EU-Demo
    Bruschi, A.; Baiocchi, B.; Figini, L.; Garavaglia, S.; Moro, A.; Platania, P.; Rispoli, N.; Simonetto, A.; Hogge, J. P.; Chavan, R.; Clement, A.; Crisinel, F.; Goodman, T. P.; Marraco Borderas, C. L.; Noel, M.; Xydou, A.; Jelonnek, J.; Wu, C.; Ell, B.; Gantenbein, G.; Illy, S.; Jin, J.; Ruess, T.; Rzesnicki, T.; Strauss, D.; Aiello, G.; Scherer, T.; Schreck, P.; Spaeh, P.; Avramidis, K.; Chelis, I.; Latsas, G.; Peponis, D.; Tigelis, I.; Collaku, A.; Difonzo, R.; Gajetti, E.; Savoldi, L.; Fanale, F.; Pinna, T.; Fanelli, P.; Salvitti, A.; Ioannidis, Z.; Marsen, S.; Stange, T.; Tsironis, C.; Wagner, D.
    2023, October. 29th IAEA Fusion Energy Conference (FEC 2023), London, United Kingdom, October 16–21, 2023
  187. Ionic and Thermal Transport in Ion Conducting Ceramic Electrolytes
    Rohde, M.; Seifert, H. J.
    2023. International Thermal Conductivity Conference 2022
  188. Phase-field investigation on the microstructural evolution of eutectic transformation and four-phase reaction in Mo-Si-Ti system
    Cai, Y.; Wang, F.; Czerny, A.; Seifert, H. J.; Nestler, B.
    2023. Acta Materialia, 258, Art.-Nr.: 119178. doi:10.1016/j.actamat.2023.119178
  189. Structure, site symmetry and spin-orbit coupled magnetism of a CaAlO mayenite single crystal substituted with 0.26 at.% Ni
    Schwarz, B.; Ebbinghaus, S. G.; Eichhöfer, A.; Simonelli, L.; Krause, H.; Bergfeldt, T.; Indris, S.; Janek, J.; Ehrenberg, H.
    2023. Physica B: Condensed Matter, 666, Art.-Nr.: 415090. doi:10.1016/j.physb.2023.415090
  190. Effect of neutron irradiation on tensile properties of advanced Cu-based alloys and composites developed for fusion applications
    Terentyev, D.; Rieth, M.; Pintsuk, G.; Müller, A. von; Antusch, S.; Zinovev, A.; Bakaev, A.; Poleshchuk, K.; Aiello, G.
    2023. Journal of Nuclear Materials, 584, Article no: 154587. doi:10.1016/j.jnucmat.2023.154587
  191. Ultrafast laser structuring of electrodes to boost electrochemical performance of lithium-ion batteries
    Pfleging, W.
    2023, September 28. Procédés Laser Pour L’Industrie Conférences (PLI 2023), Rennes, France, September 27–28, 2023
  192. Thermal and Calorimetric Studies on the Safety of Post-Lithium Batteries
    ul Mohsin, I.; Ziebert, C.
    2023, September 8. 74th Annual Meeting of the International Society of Electrochemistry (ISE 2023), Lyon, France, September 3–8, 2023
  193. Development of in-situ Delayed Hydride Cracking tests using neutron imaging to study the H redistribution in Zr-2.5%Nb
    Soria, S. R.; Gomez, A.; Grosse, M.; Schulz, M.; Santisteban, J. R.; Vizcaino, P.
    2023. Journal of Physics: Conference Series, 2605 (1), 012036. doi:10.1088/1742-6596/2605/1/012036
  194. Hydrogen diffusion in Zr-2.5Nb pressure tubes specimens between 300°C-400°C by in-situ neutron imaging experiments
    Stella, V. M.; Soria, S. R.; Gomez, A.; Grosse, M.; Schulz, M.; Santisteban, J. R.
    2023. Journal of Physics: Conference Series, 2605 (1), Art.-Nr.: 012037. doi:10.1088/1742-6596/2605/1/012037
  195. Comparative analysis of low cycle fatigue behavior of pre-corroded standard and sub-sized EUROFER97 specimens exposed to ceramic breeder environment
    Gaisina, E.; Gaisin, R.; Leys, J.; Knitter, R.; Aktaa, J.; Walter, M.
    2023. Nuclear Materials and Energy, 36, Art.-Nr.: 101497. doi:10.1016/j.nme.2023.101497
  196. Targeting new ways for large-scale, high-speed surface functionalization using direct laser interference patterning in a roll-to-roll process
    Zwahr, C.; Serey, N.; Nitschke, L.; Bischoff, C.; Rädel, U.; Meyer, A.; Zhu, P.; Pfleging, W.
    2023. International Journal of Extreme Manufacturing, 5 (3), Art.-Nr.: 035006. doi:10.1088/2631-7990/acd916
  197. Eutectic reaction and oxidation behavior of Cr-coated Zircaloy-4 accident-tolerant fuel cladding under various heating rates
    Kim, D.; Steinbrück, M.; Große, M.; Tang, C.; Lee, Y.
    2023. Journal of Nuclear Materials, 583, Art.-Nr.: 154538. doi:10.1016/j.jnucmat.2023.154538
  198. Laser structuring of high mass loaded and aqueous acid processed Li(Ni₀.₆Mn₀.₂Co₀.₂)O₂ cathodes for lithium-ion batteries
    Zhu, P.; Trouillet, V.; Heißler, S.; Pfleging, W.
    2023. Journal of Energy Storage, 66, 107401. doi:10.1016/j.est.2023.107401
  199. Oxidation kinetics at 450–550 °C for Steel T91 in flowing lead–bismuth eutectic (2 m/s, 10 % oxygen)
    Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Tsisar, V.
    2023, August 29. Annual Congress of the European Federation of Corrosion (EUROCORR 2023), Brussels, Belgium, August 27–31, 2023
  200. Laser materials processing in manufacturing of lithium-ion batteries
    Smyrek, P.; Pfleging, W.
    2023. Processing and Manufacturing of Electrodes for Lithium-Ion Batteries. Ed.: J. Li, 101–127, Institution of Engineering and Technology (IET). doi:10.1049/PBPO227E_ch5
  201. TEM investigation of reduced activation ferritic/martensitic alloys developed by thermodynamic modeling
    Kachko, O.; Puype, A.; Terentyev, D.; Duerrschnabel, M.; Klimenkov, M.; Petrov, R. H.
    2023. Journal of Nuclear Materials, 582, Art.-Nr. 154480. doi:10.1016/j.jnucmat.2023.154480
  202. Experimental and modelling results of the QUENCH-20 experiment with BWR test bundle
    Stuckert, J.; Bechta, S.; Hollands, T.; Isaksson, P.; Steinbrueck, M.
    2023. Nuclear Engineering and Design, 410, Article no: 112391. doi:10.1016/j.nucengdes.2023.112391
  203. The Role of Cerium Valence in the Conversion Temperature of HTiO Nanoribbons to TiO-B and Anatase Nanoribbons, and Further to Rutile
    Umek, P.; Dürrschnabel, M.; Molina-Luna, L.; Škapin, S.; Korošec, R. C.; Bittencourt, C.
    2023. Molecules, 28 (15), Art.-Nr.: 5838. doi:10.3390/molecules28155838
  204. Thermal Behavior Modeling of Lithium-Ion Batteries: A Comprehensive Review
    Madani, S. S.; Ziebert, C.; Marzband, M.
    2023. Symmetry, 15 (8), Art.-Nr.: 1597. doi:10.3390/sym15081597
  205. Synthesis of VAlC thin films by thermal annealing of nanoscale elemental multilayered precursors: Incorporation of layered Ar bubbles and impact on microstructure formation
    Tang, C.; Dürrschnabel, M.; Jäntsch, U.; Klimenkov, M.; Steinbrück, M.; Ulrich, S.; Hans, M.; Schneider, J. M.; Stüber, M.
    2023. Applied Surface Science, 629, Art.-Nr.: 157340. doi:10.1016/j.apsusc.2023.157340
  206. Nitriding model for zirconium based fuel cladding in severe accident codes
    Jäckel, B. S.; Birchley, J. C.; Lind, T.; Steinbrück, M.; Park, S.
    2023. Journal of Nuclear Materials, 582, Art.-Nr.: 154466. doi:10.1016/j.jnucmat.2023.154466
  207. Insights into magnesium batteries using calorimetry
    Ziebert, C.
    2023. Open Access Government, 39 (1), 558–559. doi:10.56367/OAG-039-10412
  208. Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
    Kauffmann, A.; Laube, S.
    2023, July 4. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023
  209. New Insights into Self‐Discharge and Heat Generation in Magnesium Batteries
    Ul Mohsin, I.; Riedel, S.; Xiu, Y.; Zhao-Karger, Z.; Ziebert, C.
    2023. Batteries & Supercaps, 6 (7), Art.-Nr.: e202300251. doi:10.1002/batt.202300251
  210. High Flashpoint and Eco-Friendly Electrolyte Solvent for Lithium-Ion Batteries
    Ströbel, M.; Kiefer, L.; Pross-Brakhage, J.; Hemmerling, J.; Finster, P.; Ziebert, C.; Birke, K. P.
    2023. Batteries, 9 (7), Art.-Nr.: 348. doi:10.3390/batteries9070348
  211. Microstructure evolution in the self-propagating reaction in Al/Ru bilayers by phase-field simulations and experiments
    Dargahi Noubary, K.; Schäfer, C.; Pauly, C.; Kellner, M.; Ott, V.; Stüber, M.; Mücklich, F.; Nestler, B.
    2023. Journal of vacuum science & technology / A, 41 (4), Art.-Nr.: 043407. doi:10.1116/6.0002587
  212. Analysis of iron-chromium-aluminum samples exposed to accident conditions followed by quench in the QUENCH-19 experiment
    Doyle, P.; Stuckert, J.; Grosse, M.; Steinbrück, M.; Nelson, A. T.; Harp, J.; Terrani, K.
    2023. Journal of Nuclear Materials, 580, Article no: 154433. doi:10.1016/j.jnucmat.2023.154433
  213. Adsorption Thermodynamics, Modeling, and Kinetics Studies for the Removal of Lead Ions Using ZnO Nanorods
    Ata, S.; Tabassum, A.; Shaheed, I.; ul Mohsin, I.; Alwadai, N.; Al Huwayz, M.; Iqbal, M.; Nazir, A.
    2023. Adsorption Science and Technology, 2023, Art.Nr.: 7740674. doi:10.1155/2023/7740674
  214. Systematic Study of the Multiple Variables Involved in V₂AlC Acid-Based Etching Processes, a Key Step in MXene Synthesis
    Mendoza-Sánchez, B.; Samperio-Niembro, E.; Dolotko, O.; Bergfeldt, T.; Kübel, C.; Knapp, M.; Shuck, C. E.
    2023. ACS Applied Materials & Interfaces, 15 (23), 28332–28348. doi:10.1021/acsami.3c01671
  215. Liquid metals in concentrating solar power and requirements on structural materials
    Schroer, C.; Yurechko-Hussy, M.; Martini, F.; Bonnekoh, C.; Rieth, M.; Gorr, B.; Weisenburger, A.; Heinzel, A.; Fetzer, R.; Müller, G.; Fuchs, J.; Onea, A.; Ruck, S.; Stieglitz, R.
    2023, June 13. Helmholtz Energy Conference (2023), Koblenz, Germany, June 12–13, 2023
  216. CrB-type, ordered α -MnB: Single crystal structure and spin-canted magnetic behavior
    Kalyon, N.; Zieschang, A.-M.; Hofmann, K.; Lepple, M.; Fries, M.; Skokov, K. P.; Dürrschnabel, M.; Kleebe, H.-J.; Gutfleisch, O.; Albert, B.
    2023. APL Materials, 11 (6), Art.-Nr.: 060701. doi:10.1063/5.0148236
  217. Microstructural evolution in ODS-EUROFER steel caused by high-dose He ion implantations with systematic variation of implantation parameters
    Emelyanova, O. V.; Gentils, A.; Borodin, V. A.; Dzhumaev, P. S.; Vladimirov, P. V.; Lindau, R.; Möslang, A.
    2023. Nuclear Materials and Energy, 35, Art.-Nr.: 101456. doi:10.1016/j.nme.2023.101456
  218. Evolution of the EUROFER97 microstructure during thermal treatment up to 122,000 h
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Möslang, A.
    2023. Nuclear Materials and Energy, 35, Art.-Nr.: 101451. doi:10.1016/j.nme.2023.101451
  219. Comparison of K-doped and pure cold-rolled tungsten sheets: Microstructure restoration in different temperature regimes
    Lied, P.; Pantleon, W.; Bonnekoh, C.; Dürrschnabel, M.; Bienert, C.; Hoffmann, A.; Reiser, J.; Rieth, M.
    2023. International Journal of Refractory Metals and Hard Materials, 113, Art.-Nr.: 106198. doi:10.1016/j.ijrmhm.2023.106198
  220. Microstructural insights into EUROFER97 batch 3 steels
    Duerrschnabel, M.; Jäntsch, U.; Gaisin, R.; Rieth, M.
    2023. Nuclear Materials and Energy, 35, Art.-Nr.: 101445. doi:10.1016/j.nme.2023.101445
  221. Beryllium intermetallics: Industrial experience on development and manufacture
    Gaisin, R.; Frants, Y.; Kolmakov, M.; Zorin, B.; Kylyshkanov, M.; Podoinikov, M.; Udartsev, S.; Vechkutov, A.; Chakin, V.; Vladimirov, P.
    2023. Nuclear Materials and Energy, 35, Art.-Nr.: 101444. doi:10.1016/j.nme.2023.101444
  222. From lithium to potassium: Comparison of cations in poly(ethylene oxide)-based block copolymer electrolytes for solid-state alkali metal batteries
    Khudyshkina, A. D.; Butzelaar, A. J.; Guo, Y.; Hoffmann, M.; Bergfeldt, T.; Schaller, M.; Indris, S.; Wilhelm, M.; Théato, P.; Jeschull, F.
    2023. Electrochimica Acta, 454, Article no: 142421. doi:10.1016/j.electacta.2023.142421
  223. Cold Spray metal powder deposition with 9 %Cr-steel applied for the HCPB First Wall fabrication: Proof of concept and options for ODS steel processing
    Neuberger, H.; Hernandez, F.; Rieth, M.; Bonnekoh, C.; Stratil, L.; Dlouhy, I.; Dymacek, P.; Müller, O.; Adler, L.; Kunert, U.
    2023. Nuclear Materials and Energy, 35, Art.-Nr.: 101427. doi:10.1016/j.nme.2023.101427
  224. Recent Advances in Upscaling Ultrafast Laser Structuring of High-Energy Electrodes for Lithium-ion Batteries
    Pfleging, W.
    2023, May 8. Conference on Lasers and Electro-Optics (CLEO 2023), San Jose, CA, USA, May 7–12, 2023
  225. Effects of self-healing biomimetic subsoiler on tillage resistance, wear-corrosion performance and soil disturbance morphology under different soil types
    Wang, Y.; Lu, C.; Chen, J.; Cui, C.; Pan, Y.; Pfleging, W.; Sun, J.
    2023. International Journal of Agricultural and Biological Engineering, 16 (3), 7 – 14. doi:10.25165/j.ijabe.20231603.7876
  226. Heterogeneous microstructures tuned in a high throughput architecture
    Short, M.; Müller, J.; Lee, S.; Fornasier, H.; Köhler, U.; Ott, V.; Stüber, M.; Gerdes, B.; Rupp, T.; Kirchlechner, C.; Woll, K.
    2023. Materials & Design, 229, Art.-Nr.: 111834. doi:10.1016/j.matdes.2023.111834
  227. Lanthanum plumbide as a new neutron multiplier material
    Gaisin, R.; Pereslavtsev, P.; Baumgaertner, S.; Seemann, K.; Gaisina, E.; Chakin, V.; Udartsev, S.; Vladimirov, P.; Gorr, B.
    2023. Journal of Materials Research and Technology, 24, 3399–3412. doi:10.1016/j.jmrt.2023.03.211
  228. Laser Structuring of Electrodes and its Perspectives for Battery Production
    Pfleging, W.
    2023, April 26. 7. UKP-Workshop: Ultrafast Laser Technology (2023), Aachen, Germany, April 26–27, 2023
  229. How calorimetry can pave the way for mature and safe sodium-ion batteries
    Ziebert, C.
    2023. Open Access Government, 38 (1), 434–435. doi:10.56367/OAG-038-10412
  230. Einflüsse ausgewählter Prozessparameter auf die Eigenschaften suspensionsgespritzter Wolframcarbid/Cobalt-Beschichtungen. PhD dissertation
    Loskyll, S.
    2023, March 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000157512
  231. Loss tangent measurements on an extremely large diamond disc for Brewster angle windows
    Meier, A.; Aiello, G.; Scherer, T.; Schreck, S.; Strauss, D.; Wild, C.; Woerner, E.
    2023, March 30. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Magnetismus (2023), Dresden, Germany, March 26–31, 2023
  232. Simulation study of LC superconducting microresonators for diamond characterization
    Mazzocchi, F.; Scherer, T.; Strauss, D.
    2023, March 29. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Magnetismus (2023), Dresden, Germany, March 26–31, 2023
  233. Numerical analyses of CVD diamond windows in high power microwave applications
    Aiello, G.; Meier, A.; Scherer, T.; Laqua, H. P.; Schreck, S.; Strauss, D.
    2023, March 29. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Magnetismus (2023), Dresden, Germany, March 26–31, 2023
  234. Ab initio study of hydrogen in titanium beryllides
    Bachurin, D. V.; Stihl, C.; Vladimirov, P.
    2023. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000157464
  235. Raw Data to "The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys"
    Winkens, G.; Kauffmann, A.
    2023, March 28. doi:10.5445/IR/1000157205
  236. Research data for 10.1002/adem.202201441
    Eusterholz, M. K.; Boll, T.; Ott, V.; Stüber, M.; Lu, Y.; Gebauer, J.; Ulrich, S.; Kauffmann, A.; Heilmaier, M.
    2023, March 20. doi:10.5445/IR/1000156942
  237. Extending the 3D-battery concept: large areal ultrashort pulsed laser structuring of multilayered electrode coatings
    Sterzl, Y.; Pfleging, W.
    2023. Laser-based Micro- and Nanoprocessing XVII, Art.-Nr.: 124090O, SPIE. doi:10.1117/12.2650288
  238. Laser patterning and electrochemical characterization of thick-film cathodes for lithium-ion batteries
    Zhu, P.; Smyrek, P.; Ebert, B.; Pfleging, W.
    2023. Laser-based Micro- and Nanoprocessing XVII, San Francisco, CA, January 31 - February 2, 2023. Ed.: R. Kling, Article no: 124090K, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2648881
  239. Laser structuring of electrodes in roll-to-roll environment using multi-beam processing: process upscaling and its perspective
    Meyer, A. P.; Sterzl, Y.; Rädel, U.; Xiao, S.; Zenz, M.; Schwab, D.; Pfleging, W.
    2023. Laser-based Micro- and Nanoprocessing XVII 2023. Ed.: R. Kling, Article no: 124090J, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2651089
  240. Laser structuring and functionalization of nanoscaled battery materials
    Pfleging, W.; Meyer, A. P.; Rist, U.; Smyrek, P.; Sterzl, Y.; Zheng, Y.; Zhu, P.
    2023. Nanoscale and Quantum Materials: From Synthesis and Laser Processing to Applications 2023, San Francisco, CA, January 28-29, 2023. Ed.: A.V. Kabashin, Article no: 1241002, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2654944
  241. Comparison of Corrosion Behavior of T91, 9Cr and 9CrAl ODS Steels in Liquid Pb
    Chen, L.; Xu, S.; Schroer, C.; Jia, H.; Ruan, Z.; Qin, B.; Zhou, Z.; Long, B.
    2023. Materials, 16 (6), Art.-Nr.: 2295. doi:10.3390/ma16062295
  242. CVD Diamond Disks for ITER ECH windows - dielectric loss characterization and optical inspection
    Schreck, S.; Aiello, G.; Estebanez, P.; Meier, A.; Scherer, T.; Strauss, D.; Wild, C.; Woerner, E.
    2023, March. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Magnetismus (2023), Dresden, Germany, March 26–31, 2023
  243. Simulative Optimierung von plasmagestützten Vakuumbeschichtungsprozessen. PhD dissertation
    Hofmann, P.
    2023, February 28. Karlsruher Institut für Technologie (KIT)
  244. Cationic distributions and dielectric properties of magnesium ferrites fabricated by sol-gel route and photocatalytic activity evaluation
    Ata, S.; Bano, S.; Bibi, I.; Alwadai, N.; Mohsin, I. ul; Al Huwayz, M.; Iqbal, M.; Nazir, A.
    2023. Zeitschrift für Physikalische Chemie, 237 (1-2), 67–86. doi:10.1515/zpch-2022-0086
  245. Pulse length selection in bipolar HiPIMS for high deposition rate of smooth, hard amorphous carbon films
    Ganesan, R.; Fernandez-Martinez, I.; Akhavan, B.; Matthews, D. T. A.; Sergachev, D.; Stueber, M.; McKenzie, D. R.; Bilek, M. M. M.
    2023. Surface and Coatings Technology, 454, Art.-Nr.: 129199. doi:10.1016/j.surfcoat.2022.129199
  246. Barium and strontium doped La-based perovskite synthesis via sol-gel route and photocatalytic activity evaluation for methylene blue
    Ata, S.; Shaheen, I.; Aslam, H.; Mohsin, I. U.; Alwadai, N.; Huwayz, M. A.; Iqbal, M.; Younas, U.
    2023. Results in Physics, 45, Art.-Nr.: 106235. doi:10.1016/j.rinp.2023.106235
  247. Formation of rutile (Cr,Ta,Ti)O₂ oxides during oxidation of refractory high entropy alloys in Ta-Mo-Cr-Ti-Al system
    Schellert, S.; Weber, M.; Christ, H. J.; Wiktor, C.; Butz, B.; Galetz, M. C.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Gorr, B.
    2023. Corrosion Science, 211, Art.Nr. 110885. doi:10.1016/j.corsci.2022.110885
  248. Laser structuring and functionalization of nanoscaled battery materials
    Pfleging, W.
    2023, January 28. Nanoscale and Quantum Materials (2023), San Francisco, CA, USA, January 28–29, 2023
  249. Understanding the different effects of 4d-transition metals on the performance of Li-rich cathode Li 2 MnO 3 by first-principles
    Zhang, S.; Wang, J.; Tao, X.; Yan, X.; Du, Y.; Seifert, H. J.; Lei, T.
    2023. Physical Chemistry Chemical Physics, 25 (3), 2282–2293. doi:10.1039/D2CP04271A
  250. Enhancing the cycling stability of a hollow architecture Li-rich cathode via Ce-integrated surface/interface/doping engineering
    Yu, Z.; Yu, K.; Ji, F.; Lu, Q.; Wang, Y.; Cheng, Y.; Li, H.; Xu, F.; Sun, L.; Seifert, H. J.; Du, Y.; Wang, J.
    2023. Inorganic Chemistry Frontiers, 10 (2), 682–691. doi:10.1039/d2qi02126a
  251. Improved hydrogen storage properties and mechanisms of LiAlH doped with Ni/C nanoparticles anchored on large-size TiCT
    Liu, Z.; Liu, J.; Wei, S.; Xia, Y.; Cheng, R.; Sun, L.; Xu, F.; Huang, P.; Bu, Y.; Cheng, J.; Zhou, T.; Pan, H.; Cao, Z.; Zeng, J.; Seifert, H. J.; Sun, S.; Zhang, G.
    2023. Journal of Alloys and Compounds, 931, Art.-Nr.: 167353. doi:10.1016/j.jallcom.2022.167353
  252. Calorimetric studies and safety tests on lithion-ion cells and post-lithium cells
    Ziebert, C.; Barbu, C.; Jezdinsky, T.
    2023. Open Access Government, 37 (1), 416–417. doi:10.56367/OAG-037-10412
  253. Mechanical response of pesting-resistant Mo-Si-Ti alloys for high temperature applications
    Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Winkens, G.; Wu, H.; Thota, H.; Eggeler, Y.; Mücklich, F.; Engstler, M.; Gorr, B.; Heilmaier, M.
    2023, January 6. International Conference on Plasticity, Damage, and Fracture (ICPDF 2023), Punta Cana, Dominican Republic, January 3–9, 2023
  254. Al-O-Ta Ternary Phase Diagram Evaluation
    Gebauer, J.; Pisch, A.
    2023. MSI Eureka, 98. doi:10.7121/msi-eureka-10.13522.1.8
  255. CVD Diamond Windows for Electron Cyclotron Resonant Heating in Fusion
    Strauss, D.; Aiello, G.; Meier, A.; Schreck, S.; Scherer, T. A.
    2023. International New Diamond and Nano Carbons Conference (NDNC 2023), Michigan City, IN, USA, June 18–22, 2023
  256. LC superconducting micro-resonators for diamond dielectric characterization
    Mazzocchi, F.; Strauss, D.; Scherer, T.
    2023. Hasselt Diamond Workshop (SBDD XXVII 2023), Hasselt, Belgium, March 15–17, 2023
  257. Testing of CVD diamond disks for the torus windows of the ITER EC H&CD system
    Schreck, S.; Aiello, G.; Estebanez, P.; Gafert, J.; Meier, A.; Scherer, T.; Strauss, D.
    2023. 30th IEEE Symposium on Fusion Engineering (SOFE 2023), Oxford, United Kingdom, July 9–13, 2023
  258. CVD Diamond Windows for Electron Cyclotron Resonant Heating in Fusion
    Strauss, D.; Aiello, G.; Meier, A.; Schreck, S.; Scherer, T.
    2023. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Magnetismus (2023), Dresden, Germany, March 26–31, 2023
  259. Influence of N defects on dielectric properties of Diamond
    Scherer, T.
    2023. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Magnetismus (2023), Dresden, Germany, March 26–31, 2023
  260. Towards fracture toughness measurements of MPA CVD diamond in nuclear fusion devices
    Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T. A.; Strauss, D.; Wild, C.; Woerner, E.
    2023. 48th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2023), Montreal, Canada, September 17–22, 2023
  261. OECD-NEA Joint Undertaking QUENCH-ATF
    Stuckert, J.; Steinbrück, M.; Tromm, T. W.
    2023. NEA Nuclear Safety Joint Projects Week (2023), Online, January 9–13, 2023
  262. Deformation mechanisms in Mo-based alloys evaluated by modelling of solid solution strengthening
    Winkens, G.; Kauffmann, A.; Herrmann, J. K.; Czerny, A. K.; Obert, S.; Seils, S.; Boll, T.; Baruffi, C.; Rao, Y.; Curtin, W. A.; Schwaiger, R.; Heilmaier, M.
    2023. FEMS Euromat (2023), Frankfurt am Main, Germany, September 3–7, 2023
  263. EUROfusion and F4E collaboration for the European Test Blanket Module
    Fantini, F.; Aiello, G.; D’Amico, S.; Elbez-Uzan, J.; Hernandez, F. A.; Pintsuk, G.; Poitevin, Y.; Ricapito, I.; Spagnuolo, G. A.; Vallory, J.; Wouters, P.; Zmitko, M.
    2023. 15th International Symposium on Fusion Nuclear Technology (ISFNT 2023), Las Palmas de Gran Canaria, Spain, September 10–15, 2023
  264. Towards Fracture Toughness Measurements of MPA CVD Diamond in Nuclear Fusion Devices
    Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T.; Strauss, D.; Wild, C.; Woerner, E.
    2023. 2023 48th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Montreal, QC, 17th-22nd September 2023, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz57677.2023.10298860
  265. Mo-Si-Ti Ternary Phase Diagram Evaluation
    Bondar, A.; Lukas, H. L.; Czerny, A. K.; Romaka, V.
    2023. MSI Eureka, 97, 10.18571.2.8. doi:10.7121/msi-eureka-10.18571.2.8
  266. Thermal Characteristics and Safety Aspects of Lithium-Ion Batteries: An In-Depth Review
    Madani, S. S.; Ziebert, C.; Marzband, M.
    2023. Symmetry, 15 (10), Article no: 1925. doi:10.3390/sym15101925
  267. Laser structuring of electrodes in roll-to-roll environment using multi-beam processing: process upscaling and its perspective
    Meyer, A.; Sterzl, Y.; Rädel, U.; Xiao, S.; Zenz, M.; Schwab, D.; Pfleging, W.
    2023. SPIE Photonics West LASE (SPIE LASE 2023), San Francisco, CA, USA, January 31–February 2, 2023
  268. Recent advances in upscaling ultrafast laser structuring of high-energy electrodes for lithium-ion batteries
    Pfleging, W.; Zhu, P.; Reinhold, C.; Straßburger, N.; Rist, U.; Sterzl, Y.; Meyer, A.
    2023. CLEO 2023, Optica Publishing Group (OSA). doi:10.1364/CLEO_AT.2023.AM3R.1
  269. Gaining a New Technological Readiness Level for Laser-Structured Electrodes in High-Capacity Lithium-Ion Pouch Cells
    Meyer, A.; Zhu, P.; Smith, A.; Pfleging, W.
    2023. Batteries, 9 (11), Article no: 548. doi:10.3390/batteries9110548
  270. Electrochemical Properties of Laser-Printed Multilayer Anodes for Lithium-Ion Batteries
    Rist, U.; Falkowski, V.; Pfleging, W.
    2023. Nanomaterials, 13 (17), Art.Nr.: 2411. doi:10.3390/nano13172411
  271. Thermal and Mechanical Safety Assessment of Type 21700 Lithium-Ion Batteries with NMC, NCA and LFP Cathodes–Investigation of Cell Abuse by Means of Accelerating Rate Calorimetry (ARC)
    Ohneseit, S.; Finster, P.; Floras, C.; Lubenau, N.; Uhlmann, N.; Seifert, H. J.; Ziebert, C.
    2023. Batteries, 9 (5), Art.-Nr.: 237. doi:10.3390/batteries9050237
  272. Thermo-mechanical behavior of titanium beryllide pebble beds at elevated temperatures
    Reimann, J.; Cilingir, E.; Gaisin, R.; Goraieb, A.; Nakamichi, M.; Vladimirov, P.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany. Ed. P. Vladimirov; R. Gaisin, 284–291, Karlsruher Institut für Technologie (KIT)
  273. Creep of beryllium pebbles after neutron irradiation to 6000 appm helium production
    Chakin, V.; Rolli, R.; Zmitko, M.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany. Ed.: V. Pavel; R. Gaisin, 267–283, Karlsruher Institut für Technologie (KIT)
  274. Nanoscale characterization of beryllide materials
    Duerrschnabel, M.; Gaisin, R.; Vladimirov, P.; Rieth, M.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany(KIT Scientific Reports ; 7764). Ed.: V. Pavel; R. Gaisin, 238–248, Karlsruher Institut für Technologie (KIT)
  275. Ab initio study of hydrogen behavior in titanium beryllides
    Bachurin, D. V.; Stihl, C.; Vladimirov, P. V.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany(KIT Scientific Reports ; 7764). Ed.: V. Pavel; G. Ramil, 227–237, Karlsruher Institut für Technologie (KIT)
  276. Effect of impurities on microstructural evolution under irradiation in beryllium
    Vladimirov, P. V.; Bachurin, D. V.; Stihl, C.; Zimber, N.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany, 206–226, Karlsruher Institut für Technologie (KIT)
  277. Radiation induced formation gas bubbles in beryllium after neutron irradiation up to 6000 appm helium production
    Klimenkov, M.; Jäntsch, U.; Chakin, V.; Zimber, N.; Vladimirov, P.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany, 194–205, Karlsruher Institut für Technologie (KIT)
  278. First principles simulation of resistivity recovery in irradiated beryllium
    Stihl, C.; Vladimirov, P.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany, 186–193, Karlsruher Institut für Technologie (KIT)
  279. Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
    Kauffmann, A.; Laube, S.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
    2023. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023
  280. Beryllides as advanced materials for neutron multiplication
    Gaisin, R.; Rolli, R.; Chakin, V.; Vladimirov, P.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany, 141–164, Karlsruher Institut für Technologie (KIT)
  281. In memory of Glen Longhurst (1943-2022)
    Vladimirov, P. V.; Dorn, C. K.
    2023. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany, Karlsruher Institut für Technologie (KIT)
  282. Calorimetric Studies on Chemically Delithiated LiNiMnCoO: Investigation of Phase Transition, Gas Evolution and Enthalpy of Formation
    Zhao, W.; Gebauer, J.; Bergfeldt, T.; Rohde, M.; Ziebert, C.; Du, Y.; Seifert, H. J.
    2023. Batteries, 9 (5), Art.-Nr.: 275. doi:10.3390/batteries9050275
  283. Cycling Stability of Lithium‐Ion Batteries Based on Fe–Ti‐Doped LiNiMnO Cathodes, Graphite Anodes, and the Cathode‐Additive LiPO
    Stüble, P.; Müller, M.; Bergfeldt, T.; Binder, J. R.; Hofmann, A.
    2023. Advanced Science, 10 (24), Art.-Nr.: 2301874. doi:10.1002/advs.202301874
  284. KIT Computational Route for the Safety Assessment and Radiological Risk Prediction of NPPs
    Sánchez-Espinoza, V. H.; Gabrielli, F.; Zhang, K.; Mercatali, L.; Imke, U.; Steinbrück, M.; Stuckert, J.; Gabriel, S.; Ottenburger, S.; Stieglitz, R.; Tromm, W.
    2023. RSK-AST Meeting (2023), Online, May 11, 2023
  285. New insights into Self‐discharge and Heat Generation in Magnesium Batteries
    Mohsin, I. U.; Riedel, S.; Xiu, Y.; Zhao-Karger, Z.; Ziebert, C.
    2023. Batteries & Supercaps, 6 (7), Art.Nr.: e202300137. doi:10.1002/batt.202300137
  286. Hydrogen and helium trapping in hcp beryllium
    Zimber, N.; Lammer, J.; Vladimirov, P.; Kothleitner, G.; Keast, V. J.; Dürrschnabel, M.; Klimenkov, M.
    2023. Communications Chemistry, 6 (1), 76. doi:10.1038/s42004-023-00877-7
  287. The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys
    Winkens, G.; Kauffmann, A.; Herrmann, J.; Czerny, A. K.; Obert, S.; Seils, S.; Boll, T.; Baruffi, C.; Rao, Y.; Curtin, W. A.; Schwaiger, R.; Heilmaier, M.
    2023. Communications Materials, 4 (1), 26. doi:10.1038/s43246-023-00353-8
  288. 3D printing of anode architectures for customized lithium-ion batteries
    Rist, U.; Ball, F.; Pfleging, W.
    2023. Laser-based Micro- and Nanoprocessing XVII, San Francisco, CA, January 31 - February 2, 2023. Ed.: R. Kling, Article no: 124090N, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2650281
  289. Nanoscale oxide formation at α‐Al₂O₃–Nb interfaces
    Eusterholz, M. K.; Boll, T.; Ott, V.; Stüber, M.; Lu, Y.; Gebauer, J.; Ulrich, S.; Kauffmann, A.; Heilmaier, M.
    2023. Advanced Engineering Materials, 25 (14), Art.-Nr.: 2201441. doi:10.1002/adem.202201441
  290. Proceedings of the 15th International Workshop on Beryllium Technology (BeWS-15) September, 14-15, 2022, Karlsruhe, Germany (KIT Scientific Reports ; 7764)
    Vladimirov, P.; Dorn, C.; Gaisin, R. (Eds.)
    2023. KIT Scientific Publishing. doi:10.5445/KSP/1000156312
  291. Enabling the Electrochemical Performance of Maricite-NaMnPO4 and Maricite-NaFePO4 Cathode Materials in Sodium-Ion Batteries
    Mohsin, I. U.; Schneider, L.; Yu, Z.; Cai, W.; Ziebert, C.
    2023. (A. Arunachalam, Ed.) International Journal of Electrochemistry, 2023, Artlk. ID.: 6054452. doi:10.1155/2023/6054452
  292. Design and Comparison of Diamond‐ and Sapphire‐Based NbN KIDs for Fusion Plasma Polarimetric Diagnostics
    Mazzocchi, F.; Ilin, K.; Kempf, S.; Kuzmin, A.; Strauß, D.; Scherer, T.
    2023. physica status solidi (a), Article no: 2200271. doi:10.1002/pssa.202200271
  293. Impact of Microstructure of Nanoscale Magnetron Sputtered Ru/Al Multilayers on Thermally Induced Phase Formation
    Ott, V.; Schäfer, C.; Suarez, S.; Woll, K.; Mücklich, F.; Seifert, H. J.; Ulrich, S.; Pauly, C.; Stueber, M.
    2023. Coatings, 13 (1), Art.-Nr.: 149. doi:10.3390/coatings13010149
  294. Development and Basic Qualification Steps towards an Electrochemically Based H-Sensor for Lithium System Applications
    Holstein, N.; Krauss, W.; Nitti, F. S.
    2023. Journal of Nuclear Engineering, 4 (1), 1–10. doi:10.3390/jne4010001
  295. Calorimetric Methods and Thermal Management of Lithium-ion batteries: A mini-review
    Madani, S. S.; Ziebert, C.
    2023. Journal of physics / Conference series, 2454, Art.-Nr.: 012006. doi:10.1088/1742-6596/2454/1/012006
  296. A model-based approach for temperature estimation of a lithium-ion battery pack
    Madani, S. S.; Ziebert, C.
    2023. Proceedings of 2022 Asian Power and Electrical Technology Conference, Shanghai, China, 11th November - 13th November 2022, 357–360, IEEEXplore. doi:10.1109/APET56294.2022.10072755
  297. A Model-Based Approach for Voltage and State-of- Charge Estimation of Lithium-ion Batteries
    Madani, S. S.; Ziebert, C.; Andalibi, M.; Hajihosseini, M.; Naseri, F.
    2023. Proceedings 2022 IEEE Sustainable Power and Energy Conference (iSPEC), Ehsan Pashajavid, Dowon Kim, Sumedha Rajakaruna, Ahmed Abu-Siada, 1–5, IEEEXplore. doi:10.1109/iSPEC54162.2022.10032998
  298. Effect of the laser fluence on the microstructure and the relating magnetic properties of BaFe₁₂O₁₉ films grown on YSZ(111) by PLD for optimized perpendicular recording
    Nergis, B.; Bauer, S.; Jin, X.; Seemann, K.; Horak, L.; Schneider, R.; Holy, V.; Ulrich, S.; Baumbach, T.
    2023. Journal of Materials Science, 58 (2), 718–739. doi:10.1007/s10853-022-08104-9
  299. Microstructural evolution of pre-oxidized Cr-coated Zry-4 during annealing in argon
    Liu, J.; Meng, R.; Steinbrück, M.; Große, M.; Stegmaier, U.; Tang, C.; Yang, J.; Yun, D.
    2023. Journal of Nuclear Materials, 573, Art.-Nr.: 154144. doi:10.1016/j.jnucmat.2022.154144
  300. Thermal annealing of neutron irradiation generated paramagnetic defects in transparent Al₂O₃ ceramics
    Antuzevics, A.; Elsts, E.; Kemere, M.; Lushchik, A.; Moskina, A.; Scherer, T. A.; Popov, A. I.
    2023. Optical Materials, 135, 113250. doi:10.1016/j.optmat.2022.113250
  301. Der Spröd-duktil-Übergang in ultrafeinkörnigem Wolfram. PhD dissertation
    Bonnekoh, C.
    2023. KIT Scientific Publishing. doi:10.5445/KSP/1000153067
  302. The vibrational and dielectric properties of diamond with N impurities: First principles study
    Rusevich, L. L.; Kotomin, E. A.; Popov, A. I.; Aiello, G.; Scherer, T. A.; Lushchik, A.
    2022. Diamond and Related Materials, 130, Artkl.Nr.: 109399. doi:10.1016/j.diamond.2022.109399
  303. Safety Studies on Sodium Batteries: Heat Generation and Thermal Abuse test
    Mohsin, I. U.; Ziebert, C.
    2022, December 7. 7th International Conference on Sodium Batteries (ICNaB 2022), Ulm, Germany, December 5–8, 2022
  304. Thermodynamic modelling of the V–Ti–B system
    Yazlak, M.; Christ, H.-J.; Yang, W.; Hasemann, G.; Krüger, M.; Gorr, B.
    2022. Calphad, 79, Art.-Nr.: 102477. doi:10.1016/j.calphad.2022.102477
  305. Microstructural analysis of W irradiated at different temperatures
    Klimenkov, M.; Dürrschnabel, M.; Jäntsch, U.; Lied, P.; Rieth, M.; Schneider, H. C.; Terentyev, D.; Renterghem, W. Van
    2022. Journal of Nuclear Materials, 572, Art.-Nr.: 154018. doi:10.1016/j.jnucmat.2022.154018
  306. Pesting Resistance in High Mo Containing Alloys
    Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Gorr, B.; Heilmaier, M.
    2022, November 30. Materials Research Society: MRS Fall-Meeting and Exhibit (2022), Boston, MA, USA, November 27–December 2, 2022
  307. Laserinduzierte Plasmaspektroskopie an strukturierten Lithium-Nickel-Mangan-Kobalt-Oxid Dickschichtelektroden. PhD dissertation
    Smyrek, P.
    2022, November 10. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000151855
  308. 27th International QUENCH Workshop : 27-29 September 2022, Karlsruhe Institute of Technology Karlsruhe, Germany
    Steinbrück, M. (Ed.)
    2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000152245
  309. Shock loading of carbon nanotube bundle
    Galiakhmetova, L. K.; Bachurin, D. V.; Korznikova, E. A.; Bayazitov, A. M.; Kudreyko, A. A.; Dmitriev, S. V.
    2022. Mechanics of Materials, 174, Art.-Nr.: 104460. doi:10.1016/j.mechmat.2022.104460
  310. A comprehensive heat generation study of lithium titanate oxide-based lithium-ion batteries
    Madani, S. S.; Schaltz, E.; Kær, S. K.; Ziebert, C.
    2022. Journal of Physics: Conference Series, 2382 (1), Art.-Nr.: 012004. doi:10.1088/1742-6596/2382/1/012004
  311. The electrochemical properties of bismuth-antimony-tin alloy anodes for magnesium ion batteries
    Gu, D.; Yuan, Y.; Liu, J.; Li, D.; Zhang, W.; Wu, L.; Cao, F.; Wang, J.; Huang, G.; Pan, F.
    2022. Journal of Power Sources, 548, Art.Nr. 232076. doi:10.1016/j.jpowsour.2022.232076
  312. Theoretical approach and experimental investigation of spin current tunnelling in NiFe/SiN/FeCoZrN magnetically collinear trilayer films with defined in-plane uniaxial anisotropy
    Seemann, K.
    2022. Journal of magnetism and magnetic materials, 561, Art.-Nr.: 169707. doi:10.1016/j.jmmm.2022.169707
  313. Revealing the different effects of VIB transition metals X (X = Cr, Mo, W) on the electrochemical performance of Li-rich cathode Li MnO by first-principles calculations
    Zhang, S.; Wang, J.; Liu, H.; Zhang, W.; Sun, L.; Du, Y.; Seifert, H. J.; Lei, T.
    2022. Nanoscale, 14 (40), 15034–15047. doi:10.1039/D2NR04894A
  314. Phase formation and thermal stability of quaternary MAX phase thin films in the Cr-V-C-Al system: an experimental combinatorial study
    Tang, C.; Dürrschnabel, M.; Jäntsch, U.; Klimenkov, M.; Steinbrück, M.; Ulrich, S.; Hans, M.; Schneider, J. M.; Stüber, M.
    2022, October 19. 4th International Conference on Materials: Advanced and Emerging Materials (2022), Barcelona, Spain, October 19–21, 2022
  315. Battery safety assessment using calorimetry, gas chromatography and mass spectrometry
    Ziebert, C.; Uhlmann, N.; Ohneseit, S.; Finster, P.; Yasseri, M.; Ijaz Ul Mohsin; Seifert, H. J.
    2022, October 14. 12th Annual Battery Safety Summit (2022), Tysons Corner, VA, USA, October 12–14, 2022
  316. Measuring Heat Generation in Post Lithium (Na, Mg) Batteries by 3D-Calvet MS80 calorimeter: An experimental approach
    Mohsin, I. U.; Schneider, L.; Riedel, S.; Ziebert, C.
    2022, October 13. 12th Annual Battery Safety Summit (2022), Tysons Corner, VA, USA, October 12–14, 2022
  317. (Invited) 3D Electrode Architectures for High Power and High Energy Lithium-Ion Battery Operation - Recent Approaches and Process Upscaling
    Pfleging, W.; Smyrek, P.; Yijing, Z.; Rist, U.; Sterzl, Y.; Meyer, A.; Zhu, P.
    2022. ECS Meeting Abstracts, MA2022-02 (6), Artkl.Nr.: 593. doi:10.1149/MA2022-026593mtgabs
  318. Laser-Treated Surfaces for VADs: From Inert Titanium to Potential Biofunctional Materials
    Bock, E.; Pfleging, W.; Tada, D.; Macedo, E.; Premazzi, N.; Sá, R.; Solheid, J.; Besser, H.; Andrade, A.
    2022. BME frontiers, 2022, Art.-Nr.: 9782562. doi:10.34133/2022/9782562
  319. Microwave stray radiation losses in vacuum windows
    Oosterbeek, J. W.; Stern, M.; Braune, H.; Ewert, K.; Hirsch, M.; Hollmann, F.; Laqua, H. P.; Marsen, S.; Meier, A.; Moseev, D.; Noke, F.; Reintrog, A.; Stange, T.; Wolf, R. C.
    2022. Fusion Engineering and Design, 183, Art.-Nr.: 113256. doi:10.1016/j.fusengdes.2022.113256
  320. Heat generation and degradation mechanisms studied on Na₃V₂(PO₄)₃/C positive electrode material in full pouch / coin cell assembly
    Mohsin, I. U.; Schneider, L.; Häringer, M.; Ziebert, C.; Rohde, M.; Bauer, W.; Ehrenberg, H.; Seifert, H. J.
    2022. Journal of Power Sources, 545, Art.-Nr.: 231901. doi:10.1016/j.jpowsour.2022.231901
  321. Size controlled synthesis of silver nanoparticles: a comparison of modified Turkevich and BRUST methods
    Gul, N.; Ata, S.; Bibi, I.; Ijaz-ul-Mohsin; Azam, M.; Shahid, A.; Alwadai, N.; Masood, N.; Iqbal, M.
    2022. Zeitschrift für Physikalische Chemie, 236 (9), 1173–1189. doi:10.1515/zpch-2022-0009
  322. The double-disk diamond window as backup broadband window solution for the DEMO Electron Cyclotron System
    Aiello, G.; Gantenbein, G.; Jelonnek, J.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Thumm, M.
    2022, September 20. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022
  323. An Inorganic Pac‐Man: Synthesis, structure and electrochemical studies of a heterometallic {YCoW} cluster sandwiched by two germanotungstates
    Ibrahim, M.; Mbomekallé, I. M.; de Oliveira, P.; Bergfeldt, T.; Anson, C. E.
    2022. Zeitschrift für anorganische und allgemeine Chemie, 648 (17), Art.Nr. e202200112. doi:10.1002/zaac.202200112
  324. Characterization of Boron-doped diamond and r-plane sapphire for plasma diagnostics in future nuclear fusion reactors -A survey of electrical and dielectric properties
    Scherer, T.; Strauss, D.; Aiello, G.; Mazzocchi, F.; Meier, A.
    2022, September 7. Verhandlungen der deutschen Physikalischen Gesellschaft (DPG): Fachverband Vakuumphysik und Vakuumtechnik (2022), Regensburg, Germany, September 4–9, 2022
  325. Basic considerations for fracture toughness measurements of MPA CVD diamond to be used in nuclear fusion
    Aiello, G.; Scherer, T.; Meier, A.; Schreck, S.; Strauss, D.
    2022, September 7. 85. DPG-Tagung der Sektion Kondensierte Materie (SKM 2022), Regensburg, Germany, September 4–9, 2022
  326. Magnesium batteries: a study of self-discharge and heat generation
    Mohsin, I. U.; Riedel, S.; Xiu, Y.; Zhao-Karger, Z.; Ziebert, C.
    2022, September 6. 4th International Symposium on Magnesium Batteries (MAGBATT 2022), Ulm, Germany, September 6–8, 2022
  327. The role of grain boundaries and denuded zones for tritium retention in high-dose neutron irradiated beryllium
    Zimber, N.; Vladimirov, P.
    2022. Journal of Nuclear Materials, 568, Art.-Nr. 153855. doi:10.1016/j.jnucmat.2022.153855
  328. Effect of steam and oxygen starvation on severe accident progression with air ingress
    Farkas, R.; Hózer, Z.; Nagy, I.; Vér, N.; Horváth, M.; Steinbrück, M.; Stuckert, J.; Grosse, M.
    2022. Nuclear Engineering and Design, 396, 111884. doi:10.1016/j.nucengdes.2022.111884
  329. Investigating the dominant decomposition mechanisms in lithium-ion battery cells responsible for capacity loss in different stages of electrochemical aging
    Stockhausen, R.; Gehrlein, L.; Müller, M.; Bergfeldt, T.; Hofmann, A.; Müller, F. J.; Maibach, J.; Ehrenberg, H.; Smith, A.
    2022. Journal of Power Sources, 543, Article no: 231842. doi:10.1016/j.jpowsour.2022.231842
  330. Highly efficient energy and mass transfer in bcc metals by supersonic 2-crowdions
    Shepelev, I. A.; Bachurin, D. V.; Korznikova, E. A.; Dmitriev, S. V.
    2022. Journal of Nuclear Materials, 568, Art.-Nr.: 153841. doi:10.1016/j.jnucmat.2022.153841
  331. Impurities in commercial titanium dental implants – A mass and optical emission spectrometry elemental analysis
    Stricker, A.; Bergfeldt, T.; Fretwurst, T.; Addison, O.; Schmelzeisen, R.; Rothweiler, R.; Nelson, K.; Gross, C.
    2022. Dental Materials, 38 (8), 1395–1403. doi:10.1016/j.dental.2022.06.028
  332. Results of the QUENCH-20 experiment with BWR test bundle
    Stuckert, J.; Bechta, S.; Große, M.; Isaksson, P.; Laier, J.; Moch, J.; Peters, U.; Stegmaier, U.; Steinbrück, M.
    2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000149400
  333. Tungsten–tantalum alloys for fusion reactor applications
    Nogami, S.; Ozawa, I.; Asami, D.; Matsuta, N.; Nakabayashi, S.; Baumgärtner, S.; Lied, P.; Yabuuchi, K.; Miyazawa, T.; Kikuchi, Y.; Wirtz, M.; Rieth, M.; Hasegawa, A.
    2022. Journal of Nuclear Materials, 566, Art.Nr. 153740. doi:10.1016/j.jnucmat.2022.153740
  334. Interface reactions of magnetron sputtered Si-based dual layer coating systems as oxidation protection for Mo-Si-Ti alloys
    Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Schulz, U.
    2022. Surface and Coatings Technology, 444, 128620. doi:10.1016/j.surfcoat.2022.128620
  335. Plasma-based Surface Engineering: Celebrating the research career of Professor Allan Matthews, FREng : Preface
    Leyland, A.; Rebholz, C.; Schneider, J. M.; Stüber, M.; Yerokhin, A.
    2022. Surface and Coatings Technology, 442, Art.-Nr.: 128593. doi:10.1016/j.surfcoat.2022.128593
  336. Influence of coating parameters on oxidation behavior of Cr-coated zirconium alloy for accident tolerant fuel claddings
    Kashkarov, E. B.; Sidelev, D. V.; Pushilina, N. S.; Yang, J.; Tang, C.; Steinbrueck, M.
    2022. Corrosion Science, 203, Article no: 110359. doi:10.1016/j.corsci.2022.110359
  337. How battery calorimeters can help in advancing thermal management and safety of cells and packs
    Ziebert, C.; Uhlmann, N.; Löffelholz, N.; Ohneseit, S.; Finster, P.; Yasseri, M.; Rohde, M.; Seifert, H. J.
    2022, July 14. 17th Battery Experts Forum (2022), Frankfurt am Main, Germany, July 12–14, 2022
  338. Results of the bundle test QUENCH-19 with FeCrAl claddings
    Stuckert, J.; Grosse, M.; Steinbrück, M.
    2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000148370
  339. Evaluation of Electrochemical Performance Tuning By Laser Structuring of Electrodes and Its Impact on Cell Degradation Mechanisms
    Pfleging, W.; Smyrek, P.; Froehlich, K.; Li, J.; Yijing, Z.
    2022. ECS Meeting Abstracts, MA2022-01 (2), Artkl.Nr.: 413. doi:10.1149/MA2022-012413mtgabs
  340. Investigation of Manufacturing Strategies for Advanced Silicon/Graphite Composite Anodes for Lithium-Ion Cells
    Meyer, A.; Lin, J.; Pfleging, W.
    2022. ECS Meeting Abstracts, MA2022-01 (2), Artkl.Nr.: 410. doi:10.1149/MA2022-012410mtgabs
  341. Upscaling of the Laser Structuring of Lithium-Ion Battery Electrodes - Process Development and Electrochemical Properties As a Function of Design Patterns
    Sterzl, Y.; Pfleging, W.
    2022. ECS Meeting Abstracts, MA2022-01 (2), Artkl.Nr.: 417. doi:10.1149/MA2022-012417mtgabs
  342. 3D Printing of Silicon-Based Anodes for Lithium-Ion Batteries
    Rist, U.; Sterzl, Y.; Pfleging, W.
    2022. ECS Meeting Abstracts, MA2022-01 (2), Artkl.Nr.: 427. doi:10.1149/MA2022-012427mtgabs
  343. Aqueous Processed Thick-Film Li(NiMnCo)O Electrodes with 3D Architectures
    Zhu, P.; Pfleging, W.
    2022. ECS Meeting Abstracts, MA2022-01 (2), Artkl.Nr.: 414. doi:10.1149/MA2022-012414mtgabs
  344. Pesting-Resistant Mo-Based Alloys
    Obert, S.; Schliephake, D.; Hinrichs, F.; Tirunilai, A. S.; Cong, X.; Gorr, B.; Kauffmann, A.; Heilmaier, M.
    2022, July 6. Scientific seminar of the Institut für Komplexe Materialien / Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden (IKM / IFW Dresden 2023), Dresden, Germany, July 6, 2022
  345. Atomistic study of two-dimensional discrete breathers in hcp titanium
    Bachurina, O. V.; Murzaev, R. T.; Kudreyko, A. A.; Dmitriev, S. V.; Bachurin, D. V.
    2022. The European Physical Journal B, 95 (7), Art.-Nr.: 104. doi:10.1140/epjb/s10051-022-00367-0
  346. Multiscale simulation of hollow cathode assisted internal plasma treatment process
    Hofmann, P.; Gryga, R.; Müller, M.; Stüber, M.; Ulrich, S.
    2022. Surface and Coatings Technology, 442, Art.Nr. 128422. doi:10.1016/j.surfcoat.2022.128422
  347. Status and future development of Heating and Current Drive for the EU DEMO
    Tran, M. Q.; Agostinetti, P.; Aiello, G.; Avramidis, K.; Baiocchi, B.; Barbisan, M.; Bobkov, V.; Briefi, S.; Bruschi, A.; Chavan, R.; Chelis, I.; Day, C.; Delogu, R.; Ell, B.; Fanale, F.; Fassina, A.; Fantz, U.; Faugel, H.; Figini, L.; Fiorucci, D.; Friedl, R.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Hanke, S.; Hogge, J.-P.; Hopf, C.; Kostic, A.; Illy, S.; Ioannidis, Z.; Jelonnek, J.; Jin, J.; Latsas, G.; Louche, F.; Maquet, V.; Maggiora, R.; Messiaen, A.; Milanesio, D.; Mimo, A.; Moro, A.; Ochoukov, R.; Ongena, J.; Pagonakis, I. G.; Peponis, D.; Pimazzoni, A.; Ragona, R.; Rispoli, N.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Spaeh, P.; Starnella, G.; Strauss, D.; Thumm, M.; Tierens, W.; Tigelis, I.; Tsironis, C.; Usoltceva, M.; Van Eester, D.; Veronese, F.; Vincenzi, P.; Wagner, F.; Wu, C.; Zeus, F.; Zhang, W.
    2022. Fusion Engineering and Design, 180, Article no: 113159. doi:10.1016/j.fusengdes.2022.113159
  348. Systematic investigations on the coating degradation mechanism during the steam oxidation of Cr-coated Zry-4 at 1200 °C
    Liu, J.; Steinbrück, M.; Große, M.; Stegmaier, U.; Tang, C.; Yun, D.; Yang, J.; Cui, Y.; Seifert, H. J.
    2022. Corrosion Science, 202, Art.-Nr.: 110310. doi:10.1016/j.corsci.2022.110310
  349. Oxidation of Silicon Carbide Composites for Nuclear Applications at Very High Temperatures in Steam
    Steinbrueck, M.; Grosse, M.; Stegmaier, U.; Braun, J.; Lorrette, C.
    2022. Coatings, 12 (7), Article: 875. doi:10.3390/coatings12070875
  350. Recent studies to the impact of a ceramic breeder environment on the mechanical properties of EUROFER97 under operating conditions
    Gaisina, E.; Duerrschnabel, M.; Leys, J.; Knitter, R.; Aktaa, J.; Walter, M.
    2022. Journal of Nuclear Materials, 564, Artikl.Nr.: 153677. doi:10.1016/j.jnucmat.2022.153677
  351. Remarkable catalysis of spinel ferrite XFe2O4 (X = Ni, Co, Mn, Cu, Zn) nanoparticles on the dehydrogenation properties of LiAlH4: An experimental and theoretical study
    Wei, S.; Liu, J.; Xia, Y.; Zhang, H.; Cheng, R.; Sun, L.; Xu, F.; Huang, P.; Rosei, F.; Pimerzin, A. A.; Seifert, H. J.; Pan, H.
    2022. Journal of Materials Science & Technology, 111, 189–203. doi:10.1016/j.jmst.2021.08.088
  352. Electrochemical hydrogen detection in DONES loop materials
    Holstein, N.; Krauss, W.; Nitti, F. S.
    2022. Nuclear Materials and Energy, 31, Art.-Nr. 101192. doi:10.1016/j.nme.2022.101192
  353. Corrosion behavior of Al-containing MAX-phase coatings exposed to oxygen containing molten Pb at 600 °C
    Shi, H.; Azmi, R.; Han, L.; Tang, C.; Weisenburger, A.; Heinzel, A.; Maibach, J.; Stüber, M.; Wang, K.; Müller, G.
    2022. Corrosion Science, 201, Art.-Nr.: 110275. doi:10.1016/j.corsci.2022.110275
  354. Oxidation mechanism and kinetics of nuclear-grade FeCrAl alloys in the temperature range of 500–1500 °C in steam
    Kim, C.; Tang, C.; Grosse, M.; Maeng, Y.; Jang, C.; Steinbrueck, M.
    2022. Journal of Nuclear Materials, 564, Art.-Nr.: 153696. doi:10.1016/j.jnucmat.2022.153696
  355. 3D electrode architectures for high energy and high power lithium-ion batteries
    Pfleging, W.
    2022. Energy Harvesting and Storage: Materials, Devices, and Applications XII. Ed.: P. Balaya, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2623655
  356. How Calorimetry can help in Battery Research
    Ziebert, C.; Uhlmann, N.; Löffelholz, N.; Finster, P.; Yasseri, M.; Mohsin, I. U.; Rohde, M.; Seifert, H. J.
    2022, May 23. MRS Spring Meeting and Exhibit (2022), Online, May 23–25, 2022
  357. Results of metallographic analysis of the QUENCH-20 bundle with B₄C absorber
    Stuckert, J.; Peters, U.; Stegmaier, U.; Steinbrück, M.
    2022, May 18. 10th European Review Meeting on Severe Accident Research (ERMSAR 2022), Karlsruhe, Germany, May 16–19, 2022
  358. Results of metallographic analysis of the QUENCH-20 bundle with B4C absorber
    Stuckert, J.; Peters, U.; Stegmaier, U.; Steinbrück, M.
    2022. Proceedings of the 10th European Review Meeting on Severe Accidents Research (ERMSAR2022), 1308–1318, Karlsruher Institut für Technologie (KIT)
  359. Ab initio molecular dynamics study on the disordered Li–Ga–Sn system
    Ding, A.; Han, B.; Zhang, S.; Huang, Q.; Wang, J.; Wei, C.; Du, Y.; Seifert, H. J.
    2022. Physical Chemistry Chemical Physics, 24 (17), 10537–10547. doi:10.1039/d2cp00618a
  360. Nanoscale insights into the corrosion of EUROFER by lithium ceramics
    Duerrschnabel, M.; Gaisina, E.; Gaisin, R.; Walter, M.; Aktaa, J.; Rieth, M.
    2022. Corrosion Science, 199, Art.-Nr. 110190. doi:10.1016/j.corsci.2022.110190
  361. Ternary Vss-V3Si-V5SiB2 eutectic formation in the V-Si-B system
    Yang, W. G.; Hasemann, G.; Yazlak, M.; Gorr, B.; Schwaiger, R.; Krüger, M.
    2022. Journal of Alloys and Compounds, 902, Art.Nr. 163722. doi:10.1016/j.jallcom.2022.163722
  362. Revealing the role of Mn/Li disordered mixing in Li-rich cathode LiMnO by first-principles calculations
    Zhang, S.; Wang, J.; Sun, L.; Dang, F.; Du, Y.; Seifert, H. J.; Lei, T.
    2022. Physical Review Materials, 6 (5), Art.-Nr.: 055404. doi:10.1103/PhysRevMaterials.6.055404
  363. Propagation of supersonic excitations through the carbon nanotube forest
    Galiakhmetova, L. K.; Bachurin, D. V.; Korznikova, E. A.; Shepelev, I. A.; Dmitriev, S. V.
    2022. Laser Physics, Photonic Technologies, and Molecular Modeling. Ed.: V. L. Derbov, Art.-Nr.: 121930F, SPIE. doi:10.1117/12.2626862
  364. Proof of degradation processes in thick film Li(NiMnCo)O₂ and LiFePO₄ cathodes by laser-induced breakdown spectroscopy
    Smyrek, P.; Seifert, H. J.; Pfleging, W.
    2022, April 1. SPIE Photonics West LASE (SPIE LASE 2022), San Francisco, CA, USA, January 22–February 28, 2022. doi:10.1117/12.2609726
  365. Magnetron sputtered NiAl/TiB multilayer thin films
    Wojcik, T.; Ott, V.; Özbilen, S.; Leiste, H.; Ulrich, S.; Mayrhofer, P. H.; Riedl, H.; Stueber, M.
    2022. Journal of Vacuum Science & Technology A, 40 (3), Art.-Nr.: 033410. doi:10.1116/6.0001734
  366. Diffusion of H in Zircaloy-2 and Zr-2.5%Nb rolled plates between 250 °C and 350 °C by off-situ neutron imaging experiments
    Santisteban, J. R.; Buitrago, N. L.; Moya Riffo, A.; Soria, S. R.; Baruj, A. L.; Schulz, M.; Große, M.; Luzin, V.; Hache, M.; Barrow, L.; Daymond, M. R.
    2022. Journal of Nuclear Materials, 561, Art.-Nr.: 153547. doi:10.1016/j.jnucmat.2022.153547
  367. Thermal safety assessment of commercial cylindrical lithium-ion batteries by means of Accelerating Rate Calorimetry (ARC), comparing different cathode materials
    Ohneseit, S.; Uhlmann, N.; Ziebert, C.; Seifert, H. J.
    2022, March 29. 39th International Battery Seminar and Exhibit (2022), Orlando, FL, USA, March 28–31, 2022
  368. Enhanced Hydrogen Storage Properties of LiAlH by Excellent Catalytic Activity of XTiO@h‐BN (X = Co, Ni)
    Wei, S.; Liu, J.; Xia, Y.; Zhang, H.; Cheng, R.; Sun, L.; Xu, F.; Bu, Y.; Liu, Z.; Huang, P.; Zhang, K.; Rosei, F.; Pimerzin, A. A.; Seifert, H. J.
    2022. Advanced functional materials, 32 (13), Art.-Nr.: 2110180. doi:10.1002/adfm.202110180
  369. Development of NbN based Kinetic Inductance Detectors on sapphire and diamond substrates for fusion plasma polarimetric diagnostics. PhD dissertation
    Mazzocchi, F.
    2022, March 21. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000143745
  370. Ablation behaviour of electrode materials during high power and high repetition rate laser structuring
    Meyer, A.; Sterzl, Y.; Xiao, S.; Rädel, U.; Pfleging, W.
    2022. R. Kling & A. Watanabe (Eds.), SPIE Photonics West 2022: Laser-based Micro- and Nanoprocessing XVI ; Proceedings ; 25-27 January 2022, San Francisco, CA, USA, 26, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2609536
  371. Laser-induced forward transfer as a versatile tool for developing silicon-based anode materials
    Rist, U.; Reif, A.; Pfleging, W.
    2022. R. Kling & A. Watanabe (Eds.), Laser-based Micro- and Nanoprocessing XVI, SPIE. doi:10.1117/12.2609588
  372. Ultrafast laser ablation of aqueous processed thick-film Li(NiMnCo) cathodes with 3D architectures for lithium-ion batteries
    Zhu, P.; Meyer, A.; Pfleging, W.
    2022. R. Kling & A. Watanabe (Eds.), Laser-based Micro- and Nanoprocessing XVI, SPIE. doi:10.1117/12.2608609
  373. How lasers can push silicon-graphite anodes towards next-generation battery
    Pfleging, W.; Zheng, Y.
    2022. R. Kling & A. Watanabe (Eds.), Laser-based Micro- and Nanoprocessing, SPIE. doi:10.1117/12.2609781
  374. Effect of HIP at 1000–1200 °C on microstructure and properties of extruded Be-Ti composites
    Gaisin, R.; Kuksenko, V.; Duerrschnabel, M.; Chakin, V.; Goraieb, A.; Vladimirov, P.
    2022. Nuclear Materials and Energy, 30, Art. Nr.: 101128. doi:10.1016/j.nme.2022.101128
  375. Effect of neutron irradiation on ductility of tungsten foils developed for tungsten-copper laminates
    Zinovev, A.; Terentyev, D.; Chang, C.-C.; Yin, C.; Bakaev, A.; Rieth, M.; Lied, P.; Reiser, J.; Bonnekoh, C.
    2022. Nuclear Materials and Energy, 30, Art. Nr.: 101133. doi:10.1016/j.nme.2022.101133
  376. Manufacturing of W/steel composites using electro-discharge sintering process
    Ganesh, V.; Leich, L.; Dorow-Gerspach, D.; Heuer, S.; Coenen, J. W.; Wirtz, M.; Pintsuk, G.; Gormann, F.; Lied, P.; Baumgärtner, S.; Theisen, W.; Linsmeier, C.
    2022. Nuclear Materials and Energy, 30, Art.-Nr.: 101089. doi:10.1016/j.nme.2021.101089
  377. Review on chromium coated zirconium alloy accident tolerant fuel cladding
    Yang, J.; Steinbrück, M.; Tang, C.; Große, M.; Liu, J.; Zhang, J.; Yun, D.; Wang, S.
    2022. Journal of Alloys and Compounds, 895, Art.Nr. 162450. doi:10.1016/j.jallcom.2021.162450
  378. Thermal conductivity of high-dose neutron irradiated beryllium and titanium beryllide
    Chakin, V.; Fedorov, A.; Rolli, R.; Gaisin, R.; Klimenkov, M.; Reimann, J.; Nakamichi, M.
    2022. Journal of nuclear materials, 559, Art.Nr.: 153430. doi:10.1016/j.jnucmat.2021.153430
  379. High-temperature oxidation and quenching of chromium-coated zirconium alloy ATF cladding tubes with and w/o pre-damage
    Steinbrück, M.; Stegmaier, U.; Große, M.; Czerniak, L.; Lahoda, E.; Daum, R.; Yueh, K.
    2022. Journal of nuclear materials, 559, 153470. doi:10.1016/j.jnucmat.2021.153470
  380. The effect of deviations from precise [001] tensile direction on creep of Ni-base single crystal superalloys
    Heep, L.; Bürger, D.; Bonnekoh, C.; Wollgramm, P.; Dlouhy, A.; Eggeler, G.
    2022. Scripta Materialia, 207, Art.-Nr.: 114274. doi:10.1016/j.scriptamat.2021.114274
  381. Swelling of Highly Neutron Irradiated Beryllium and Titanium Beryllide
    Chakin, V.; Fedorov, A.; Gaisin, R.; Zmitko, M.
    2022. Journal of Nuclear Engineering, 3 (4), 398–408. doi:10.3390/jne3040026
  382. Limiting degradation mechanisms for high-temperature oxidation resistance of promising ATF cladding solutions
    Steinbrück, M.; Große, M.; Tang, C.; Stuckert, J.
    2022. Proceedings | TopFuel 2022 Light Water Reactor Fuel Performance Conference | Raleigh, NC, October 9-13, 2022, 251–260, American Nuclear Society (ANS). doi:10.13182/TopFuel22-38967
  383. Elemental analysis of contemporary dental materials regarding potential beryllium content
    Burkhardt, F.; Pieralli, S.; Bergfeldt, T.; Wemken, G.; Wesemann, C.; Stolz, D.; Spies, B. C.
    2022. Scientific Reports, 12 (1), Art.-Nr.: 19119. doi:10.1038/s41598-022-21068-9
  384. The Double-Disk Diamond Window as Backup Broadband Window Solution for the DEMO Electron Cyclotron System
    Aiello, G.; Gantenbein, G.; Jelonnek, J.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Thumm, M.
    2022. Journal of Nuclear Engineering, 3 (4), 342–351. doi:10.3390/jne3040021
  385. Physics of natural and artificial diamond gemstones
    Scherer, T. A.
    2022. 85. DPG-Tagung der Sektion Kondensierte Materie (SKM 2022), Regensburg, Germany, September 4–9, 2022
  386. Dielectric loss measurements of CVD diamond disks for ITER windows
    Schreck, S.; Aiello, G.; Estebanez, P.; Meier, A.; Strauss, D.; Scherer, T.
    2022. 85. DPG-Tagung der Sektion Kondensierte Materie (SKM 2022), Regensburg, Germany, September 4–9, 2022
  387. Ultrafast-Laser Micro-Structuring of LiNiMnCoO Cathode for High-Rate Capability of Three-Dimensional Li-ion Batteries
    Tran, M. X.; Smyrek, P.; Park, J.; Pfleging, W.; Lee, J. K.
    2022. Nanomaterials, 12 (21), Art.-Nr.: 3897. doi:10.3390/nano12213897
  388. Development of diamond based KIDs
    Mazzocchi, F.; Strauss, D.; Scherer, T. A.
    2022. 85. DPG-Tagung der Sektion Kondensierte Materie (SKM 2022), Regensburg, Germany, September 4–9, 2022
  389. Deep understanding of advanced optical and dielectric materials for fusion diagnostic applications
    Popov, A.; Kotomin, E. A.; Kuzovkov, V.; Lushchik, A.; Scherer, T.
    2022. 85. DPG-Tagung der Sektion Kondensierte Materie (SKM 2022), Regensburg, Germany, September 4–9, 2022
  390. Simulation, Set-Up, and Thermal Characterization of a Water-Cooled Li-Ion Battery System
    Feinauer, M.; Uhlmann, N.; Ziebert, C.; Blank, T.
    2022. Batteries, 8 (10), Art.-Nr.: 177. doi:10.3390/batteries8100177
  391. Phase Stability and Transformation of Energy Storage Materials
    Liang, S.-M.; Ouyang, B.; Lin, S.- kang; Seifert, H. J.
    2022. JOM, 74, 4652–4653. doi:10.1007/s11837-022-05552-1
  392. Preconceptual Design of the Port Cell Section for the EU DEMO Equatorial EC System
    Spaeh, P.; Bruschi, A.; Fanale, F.; Franke, T.; Garavaglia, S.; Strauss, D.; Tran, M.-Q.
    2022. IEEE Transactions on Plasma Science, 50 (11), 4419–4424. doi:10.1109/TPS.2022.3199599
  393. Characterization Measurements of Sapphire and Diamond based KIDs for Polarimetric Plasma Diagnostics
    Mazzocchi, F.; Ilin, K.; Kempf, S.; Kuzmin, A.; Straus, D.; Scherer, T.
    2022. 2022 47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz), 2 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz50927.2022.9895947
  394. Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
    Laube, S.; Kauffmann, A.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y. M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
    2022. Science and Technology of Advanced Materials, 23 (1), 692–706. doi:10.1080/14686996.2022.2132118
  395. Phase-field investigation on three- and four-phase microstructural evolution in Mo-Si-Ti system
    Cai, Y.; Wang, F.; Czerny, A. K.; Seifert, H. J.; Nestler, B.
    2022. Materials Science and Engineering Congress (MSE 2022), Darmstadt, Germany, September 27–29, 2022
  396. Heterogeneous phase equilibria in the Mo-Si-Ti system at 1300 °C
    Czerny, A. K.; Rohde, M.; Seifert, H. J.
    2022. Materials Science and Engineering Congress (MSE 2022), Darmstadt, Germany, September 27–29, 2022
  397. Heterogeneous phase equilibria in the Mo-Si-Tisystem at 1300 °C
    Czerny, A. K.; Rohde, M.; Seifert, H. J.
    2022. Thermodynamic of Alloys (2022), Krakow, Poland, September 12–16, 2022
  398. High-entropy spinel-structure oxides as oxygen evolution reaction electrocatalyst
    Stenzel, D.; Zhou, B.; Okafor, C.; Kante, M. V.; Lin, L.; Melinte, G.; Bergfeldt, T.; Botros, M.; Hahn, H.; Breitung, B.; Schweidler, S.
    2022. Frontiers in Energy Research, 10, Art.-Nr.: 942314. doi:10.3389/fenrg.2022.942314
  399. Characterization of the Isothermal and Thermomechanical Fatigue Behavior of a Duplex Steel Considering the Alloy Microstructure
    Schellert, S.; Müller, J.; Ohrndorf, A.; Gorr, B.; Butz, B.; Christ, H.-J.
    2022. Metals, 12 (7), Art.Nr. 1161. doi:10.3390/met12071161
  400. Thermodynamic Evaluation of the system Ta–O and Preliminary Assessment of the Systems Al–Nb–O and Al–Ta–O
    Gebauer, J.; Franke, P.; Seifert, H. J.
    2022. Advanced Engineering Materials, 24 (8), Art.-Nr. 2200162. doi:10.1002/adem.202200162
  401. A Regression-Based Technique for Capacity Estimation of Lithium-Ion Batteries
    Madani, S. S.; Soghrati, R.; Ziebert, C.
    2022. Batteries, 8 (4), Art.-Nr.: 31. doi:10.3390/batteries8040031
  402. Modelling and Optimisation of Laser-Structured Battery Electrodes
    Schweighofer, L.; Eschelmüller, B.; Fröhlich, K.; Pfleging, W.; Pichler, F.
    2022. Nanomaterials, 12 (9), 1574. doi:10.3390/nano12091574
  403. Multiobjective Optimization of Laser Polishing of Additively Manufactured Ti-6Al-4V Parts for Minimum Surface Roughness and Heat-Affected Zone
    Solheid, J. S.; Elkaseer, A.; Wunsch, T.; Scholz, S.; Seifert, H. J.; Pfleging, W.
    2022. Materials, 15 (9), Art.Nr. 3323. doi:10.3390/ma15093323
  404. Materials for in-vessel components
    Pintsuk, G.; Aiello, G.; Dudarev, S. L.; Gorley, M.; Henry, J.; Richou, M.; Rieth, M.; Terentyev, D.; Vila, R.
    2022. Fusion Engineering and Design, 174, Art.Nr. 112994. doi:10.1016/j.fusengdes.2021.112994
  405. High‐temperature ternary oxide phases in Ta/Nb‐Alumina composite materials
    Eusterholz, M. K.; Boll, T.; Gebauer, J.; Weidner, A.; Kauffmann, A.; Franke, P.; Seifert, H.-J.; Biermann, H.; Aneziris, C.; Heilmaier, M.
    2022. Advanced Engineering Materials, 24 (8), Art.-Nr.: 2200161. doi:10.1002/adem.202200161
  406. Wear Study of a Magnetron-Sputtered TiC/a-C Nanocomposite Coating under Media-Lubricated Oscillating Sliding Conditions
    Schneider, J.; Ulrich, S.; Patscheider, J.; Stueber, M.
    2022. Coatings, 12 (4), Art.-Nr.: 446. doi:10.3390/coatings12040446
  407. Development of NbN based Kinetic Inductance Detectors on sapphire and diamond substrates for fusion plasma polarimetric diagnostics. PhD dissertation
    Mazzocchi, F.
    2022. KIT Scientific Publishing. doi:10.5445/KSP/1000144793
  408. Nanoskalige Analytik der Mikrostruktur von hochdosig bestrahltem Beryllium. PhD dissertation
    Zimber, N.
    2022. KIT Scientific Publishing. doi:10.5445/KSP/1000144389
  409. Titanium beryllide as an alternative to beryllium in nuclear and thermonuclear engineering, capabilities of UMP JSC in the technology development and beryllides products manufacture
    Frants, Y.; Borsuk, A.; Vechkutov, A.; Zenkov, K.; Zorin, B.; Kylyshkanov, M.; Podoinikov, M.; Udartsev, S.; Vladimirov, P.; Gaisin, R.
    2022. Journal of Physics: Conference Series, 2155 (1), Art.Nr.: 012015. doi:10.1088/1742-6596/2155/1/012015
  410. Combined Thermal Runaway Investigation of Coin Cells with an Accelerating Rate Calorimeter and a Tian-Calvet Calorimeter
    Zhao, W.; Rohde, M.; Mohsin, I. U.; Ziebert, C.; Du, Y.; Seifert, H. J.
    2022. Batteries, 8 (2). doi:10.3390/batteries8020015
  411. The Effect of Annealing Temperature on the Microstructure and Properties of Cr–C–Al Coatings on Zircaloy-4 for Accident-Tolerant Fuel (ATF) Applications
    Tang, C.; Steinbrück, M.; Grosse, M.; Ulrich, S.; Stüber, M.
    2022. Coatings, 12 (2), Art.-Nr.: 167. doi:10.3390/coatings12020167
  412. Review on Chromium Coated Zirconium Alloy Accident Tolerant Fuel Cladding
    Yang, J.; Yun, D.; Liu, J.
    2022. Cailiao Daobao/Materials Reports, 36 (1), Art.-Nr.: 20080283. doi:10.11896/cldb.20080283
  413. 26th International QUENCH Workshop : 6-9 December 2021, virtual event organized by Karlsruhe Institute of Technology Karlsruhe, Germany
    Steinbrück, M. (Ed.)
    2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000141824
  414. Investigation of Fast-Charging and Degradation Processes in 3D Silicon–Graphite Anodes
    Zheng, Y.; Yin, D.; Seifert, H. J.; Pfleging, W.
    2022. Nanomaterials, 12 (1), Art.-Nr.: 140. doi:10.3390/nano12010140
  415. An experimental test of the Mocikat-Herwig theory of local turbulent heat transfer measurements on cold objects
    Kapitz, M.; Wiesche, S. aus der; Kadic, S.; Strehle, S.
    2022. Heat and mass transfer, 58, 1041–1055. doi:10.1007/s00231-021-03158-y
  416. Containment structures and port configurations
    Bachmann, C.; Ciupinski, L.; Gliss, C.; Franke, T.; Härtl, T.; Marek, P.; Maviglia, F.; Mozzillo, R.; Pielmeier, R.; Schiller, T.; Spaeh, P.; Steinbacher, T.; Stetka, M.; Todd, T.; Vorpahl, C.
    2022. Fusion engineering and design, 174, Art.-Nr. 112966. doi:10.1016/j.fusengdes.2021.112966
  417. Recent progress in the assessment of irradiation effects for in-vessel fusion materials: Tungsten and copper alloys
    Terentyev, D.; Rieth, M.; Pintsuk, G.; Riesch, J.; Muller, A. V.; Antusch, S.; Mergia, K.; Gaganidze, E.; Schneider, H. C.; Wirtz, M.; Nogami, S.; Coenen, J.; You, J.-H.; Zinovev, A.; Renterghem, W. V.
    2022. Nuclear fusion, 62 (2), Art. Nr.: 026045. doi:10.1088/1741-4326/ac4062
  418. The oxidation behavior of Mg-Er binary alloys at 500 ℃
    Wu, J.; Yuan, Y.; Yang, L.; Chen, T.; Li, D.; Wu, L.; Jiang, B.; Steinbrück, M.; Pan, F.
    2022. Corrosion Science, 195, Art.-Nr.: 109961. doi:10.1016/j.corsci.2021.109961
  419. Creep of 316L austenitic steel at 450–550 °C in static lead-bismuth eutectic covered by argon-hydrogen gas
    Yurechko, M.; Skrypnik, A.; Wedemeyer, O.; Konys, J.; Schroer, C.
    2022. Journal of nuclear materials, 558, Art.-Nr. 153344. doi:10.1016/j.jnucmat.2021.153344
  420. THz Detection Techniques Overview
    Mazzocchi, F.; Strauß, D.; Bründermann, E.; Müller, A.-S.; Scherer, T. A.
    2021. doi:10.5445/IR/1000141033
  421. Recent Progress in the Development of Next Generation 3D Battery – Concepts, Process Development, and Up-Scaling (NextGen3DBat)
    Pfleging, W.
    2021, December 7. LASER SYMPOSIUM & ISAM 2021 (2021), Online, December 7–9, 2021
  422. Irradiation hardening and ductility loss of Eurofer97 steel variants after neutron irradiation to ITER-TBM relevant conditions
    Bhattacharya, A.; Chen, X.; Graening, T.; Geringer, J. W.; Reed, J.; Henry, J.; Pilloni, L.; Terentyev, D.; Puype, A.; Byun, T. S.; Katoh, Y.; Rieth, M.; Zinkle, S. J.
    2021. Fusion engineering and design, 173, Art.-Nr. 112935. doi:10.1016/j.fusengdes.2021.112935
  423. Erosion of tungsten marker layers in W7-X
    W7-X Team; Mayer, M.; Balden, M.; Brezinsek, S.; Dhard, C. P.; Elgeti, S.; Fajardo, D.; Fellinger, J.; Guitart Corominas, M.; Hiret, P.; Kandler, M.; Krause, M.; Loesser, D.; Lumsdaine, A.; Naujoks, D.; Neilson, H.; Neu, R.; Oelmann, J.; Ruset, C.; Schmidt-Dencker, J.-H.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Physica scripta, 96 (12), Article no: 124070. doi:10.1088/1402-4896/ac3b68
  424. Plasma-wall interaction studies in W7-X: main results from the recent divertor operations
    W7-X Team; Dhard, C. P.; Brezinsek, S.; Mayer, M.; Naujoks, D.; Masuzaki, S.; Zhao, D.; Yi, R.; Oelmann, J.; Schmid, K.; Romazanov, J.; Pardanaud, C.; Kandler, M.; Kharwandikar, A. K.; Schlisio, G.; Volzke, O.; Grote, H.; Gao, Y.; Rudischhauser, L.; Goriaev, A.; Wauters, T.; Kirschner, A.; Sereda, S.; Wang, E.; Rasinski, M.; Dittmar, T.; Motojima, G.; Hwangbo, D.; Kajita, S.; Balden, M.; Burwitz, V. V.; Neu, R.; Linsmeier, C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Physica scripta, 96 (12), Article no: 124059. doi:10.1088/1402-4896/ac35c0
  425. Basic design considerations for a frequency step-tunable electron cyclotron wave system to suppress NTMs in DEMO
    Wu, C.; Aiello, G.; Avramidis, K. A.; Bruschi, A.; Fable, E.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Illy, S.; Janky, F.; Jelonnek, J.; Kudláček, O.; Moro, A.; Poli, E.; Ruess, T.; Scherer, T.; Schramm, R.; Siccinio, M.; Snicker, A.; Strauß, D.; Suárez López, G.; Tardini, G.; Thumm, M.; Tran, M. Q.; Zohm, H.
    2021. Fusion engineering and design, 173, Art.-Nr.: 112931. doi:10.1016/j.fusengdes.2021.112931
  426. Plasma radiation behavior approaching high-radiation scenarios in W7-X
    W7-X Team; Zhang, D.; Burhenn, R.; Feng, Y.; König, R.; Buttenschön, B.; Beidler, C. D.; Hacker, P.; Reimold, F.; Thomsen, H.; Laube, R.; Klinger, T.; Giannone, L.; Penzel, F.; Pavone, A.; Krychowiak, M.; Beurskens, M.; Bozhenkov, S.; Brunner, J. K.; Effenberg, F.; Fuchert, G.; Gao, Y.; Geiger, J.; Hirsch, M.; Höfel, U.; Jakubowski, M.; Knauer, J.; Kwak, S.; Laqua, H. P.; Niemann, H.; Otte, M.; Pedersen, T. S.; Pasch, E.; Pablant, N.; Rahbarnia, K.; Svensson, J.; Blackwell, B.; Drews, P.; Endler, M.; Rudischhauser, L.; Wang, E.; Weir, G.; Winters, V.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (12), Art.-Nr.: 126002. doi:10.1088/1741-4326/ac2b75
  427. Dissimilar Metal Solution from Solid Alloys as Observed for Steels and Nickel‐Based Alloys in the Presence of Lead‐Based Liquid Alloys or Liquid Tin
    Schroer, C.
    2021. JOM, 73 (12), 4000–4008. doi:10.1007/s11837-021-04948-9
  428. Research on Gyrotron Components and Control for Advanced EC Heating, Plasma Control and Diagnostics
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K.; Braune, H.; Bruschi, A.; Chelis, I.; Ell, B.; Franke, T.; Gantenbein, G.; Hogge, J.-P.; Illy, S.; Ioannidis, Z.; Jin, J.; Laqua, H.; Latsas, G.; Marek, A.; Marsen, S.; Moseev, D.; Oosterbeck, J.-W.; Peponis, D.; Krier, L.; Ruess, T.; Rzesnicki, T.; Savoldi, L.; Scherer, T.; Spaeh, P.; Stanculovic, S.; Stange, T.; Strauss, D.; Thum, M.; Tigelis, I.; Tran, M. Q.; Wolf, R.; Wu, C.
    2021, November 18. 30th International Toki Conference on Plasma and Fusion Research (ITC 2021), Online, November 16–19, 2021
  429. Nanoskalige Analytik der Mikrostruktur von hochdosig bestrahltem Beryllium. PhD dissertation
    Zimber, N.
    2021, November 18. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000139959
  430. Silicon-Based Graphite Electrode Materials–Impact of Electrode Architecture on Electrochemical Performance and Cell Degradation
    Pfleging, W.; Zheng, Y.
    2021, November 16. International Conference on Carbon Chemistry and Materials (2021), Online, November 15–17, 2021
  431. Metadata Schemas for FAIR* Data in Materials Science: Scanning Electron Microscopy (SEM) Use Case : A detailed and practical schema developed in cooperation with materials scientists
    Joseph, R.; Chauhan, A.; Eschke, C.; Ihsan A.; Jalali, M.; Jäntsch, U.; Jung, N.; Kumar, C. N. S.; Kübel, C.; Lucas, C.; Mail, M.; Mazilkin, A.; Neidiger, C.; Panighel, M.; Sandfeld, S.; Stotzka, R.; Thelen, R.; Aversa, R.
    2021, November 4. Research Data Alliance Virtual Plenary 18 (2021), Online, October 27–November 11, 2021
  432. The Evaluation of Mg–Ga Compounds as Electrode Materials for Mg-Ion Batteries via Ab Initio Simulation
    Song, C.; Yuan, Y.; Gu, D.; Chen, T.; Liu, Y.; Tang, A.; Wu, L.; Li, D.; Pan, F.
    2021. Journal of the Electrochemical Society, 168 (11), Art.-Nr. 110539. doi:10.1149/1945-7111/ac3936
  433. Ion temperature clamping in Wendelstein 7-X electron cyclotron heated plasmas
    W7-X Team; Beurskens, M. N. A.; Bozhenkov, S. A.; Ford, O.; Xanthopoulos, P.; Zocco, A.; Turkin, Y.; Alonso, A.; Beidler, C.; Calvo, I.; Carralero, D.; Estrada, T.; Fuchert, G.; Grulke, O.; Hirsch, M.; Ida, K.; Jakubowski, M.; Killer, C.; Krychowiak, M.; Kwak, S.; Lazerson, S.; Langenberg, A.; Lunsford, R.; Pablant, N.; Pasch, E.; Pavone, A.; Reimold, F.; Romba, T.; Stechow, A. von; Smith, H. M.; Windisch, T.; Yoshinuma, M.; Zhang, D.; Wolf, R. C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (11), 116072. doi:10.1088/1741-4326/ac1653
  434. A model for the fast evaluation of prompt losses of energetic ions in stellarators
    W7-X Team; Velasco, J. L.; Calvo, I.; Mulas, S.; Sánchez, E.; Parra, F. I.; Cappa, Á.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (11), Art.-Nr.: 116059. doi:10.1088/1741-4326/ac2994
  435. Confinement degradation and plasma loss induced by strong sawtooth crashes at W7-X
    W7-X Team; Zanini, M.; Buttenschön, B.; Laqua, H. P.; Thomsen, H.; Stange, T.; Brandt, C.; Braune, H.; Brunner, K. J.; Dinklage, A.; Gao, Y.; Hirsch, M.; Höfel, U.; Knauer, J.; Marsen, S.; Marushchenko, N.; Pavone, A.; Rahbarnia, K.; Schilling, J.; Turkin, Y.; Wolf, R. C.; Zocco, A.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (11), Art.-Nr.: 116053. doi:10.1088/1741-4326/ac2870
  436. Bolometer tomography on Wendelstein 7-X for study of radiation asymmetry
    W7-X Team; Zhang, D.; Burhenn, R.; Beidler, C. D.; Feng, Y.; Thomsen, H.; Brandt, C.; Buller, S.; Reimold, F.; Hacker, P.; Laube, R.; Geiger, J.; Regaña, J. M. G.; Smith, H. M.; König, R.; Giannone, L.; Penzel, F.; Klinger, T.; Baldzuhn, J.; Bozhenkov, S.; Bräuer, T.; Brunner, J. K.; Buttenschön, B.; Damm, H.; Endler, M.; Effenberg, F.; Fuchert, G.; Gao, Y.; Jakubowski, M.; Knauer, J.; Kremeyer, T.; Krychowiak, M.; Kwak, S.; Laqua, H. P.; Langenberg, A.; Otte, M.; Pablant, N.; Pasch, E.; Rahbarnia, K.; Pavone, A.; Rudischhauser, L.; Svensson, J.; Killer, C.; Windisch, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (11), Art.-Nr.: 116043. doi:10.1088/1741-4326/ac2778
  437. Fast simulations for large aspect ratio stellarators with the neoclassical code KNOSOS
    W7-X Team; Velasco, J. L.; Calvo, I.; Parra, F. I.; d’Herbemont, V.; Smith, H. M.; Carralero, D.; Estrada, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (11), Article no: 116013. doi:10.1088/1741-4326/ac1dc7
  438. Impurity transport in ion- and electron-root confinement scenarios at Wendelstein 7-X
    W7-X Team; Langenberg, A.; Wegner, T.; Marchuk, O.; García-Regaña, J. M.; Pablant, N. A.; Fuchert, G.; Bozhenkov, S.; Damm, H.; Pasch, E.; Brunner, K.-J.; Knauer, J.; Beurskens, M.; Reimold, F.; Wolf, R. C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (11), Article no: 116018. doi:10.1088/1741-4326/ac24d4
  439. Swift evaluation of electron density profiles obtained by the alkali beam emission spectroscopy technique using linearized reconstruction
    W7-X Team; Vécsei, M.; Anda, G.; Asztalos, O.; Dunai, D.; Hegedűs, S.; Nagy, D.; Otte, M.; Pokol, G. I.; Zoletnik, S.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Review of scientific instruments, 92 (11), 113501. doi:10.1063/5.0057158
  440. 2D measurements of parallel counter-streaming flows in the W7-X scrape-off layer for attached and detached plasmas
    W7-X Team; Perseo, V.; Winters, V.; Feng, Y.; Reimold, F.; Ford, O. P.; König, R.; Bozhenkov, S. A.; Brunner, K. J.; Burhenn, R.; Drewelow, P.; Ennis, D. A.; Gao, Y.; Gradic, D.; Hacker, P.; Hergenhahn, U.; Jakubowski, M. W.; Knauer, J.; Kremeyer, T.; Kriete, D. M.; Krychowiak, M.; Kwak, S.; Niemann, H.; Pavone, A.; Pisano, F.; Puig Sitjes, A.; Schlisio, G.; Svensson, J.; Zhang, D.; Sunn Pedersen, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (11), 116039. doi:10.1088/1741-4326/ac277a
  441. Investigation of the oxidation mechanisms of superlattice Cr-CrN/TiSiN-Cr multilayer coatings on Zircaloy substrates under high-temperature steam atmospheres
    Liu, J.; Hao, Z.; Cui, Z.; Ma, D.; Lu, J.; Cui, Y.; Li, C.; Liu, W.; Xie, S.; Huang, P.; Bai, G.; Yun, D.
    2021. Corrosion science, 192, Art.Nr.: 109782. doi:10.1016/j.corsci.2021.109782
  442. High-temperature oxidation of AlCrFeNi-(Mn or Co) high-entropy alloys: Effect of atmosphere and reactive element addition
    Tang, C.; Shi, H.; Jianu, A.; Weisenburger, A.; Victor, G.; Grosse, M.; Müller, G.; Seifert, H. J.; Steinbrück, M.
    2021. Corrosion science, 192, Art.Nr.: 109809. doi:10.1016/j.corsci.2021.109809
  443. Transient experiments on oxidation and degradation of Cr-coated Zircaloy in steam up to 1600 ℃
    Liu, J.; Tang, C.; Steinbrück, M.; Yang, J.; Stegmaier, U.; Große, M.; Yun, D.; Seifert, H. J.
    2021. Corrosion science, 192, Art.-Nr.: 109805. doi:10.1016/j.corsci.2021.109805
  444. DEM simulations of vibrated sphere packings in slender prismatic containers
    Jaggannagari, S. R.; Desu, R. K.; Reimann, J.; Gan, Y.; Moscardini, M.; Annabattula, R. K.
    2021. Powder technology, 393, 31–59. doi:10.1016/j.powtec.2021.06.033
  445. Evolution of microstructure in neutron irradiated cold rolled tungsten and its correlation with hardness
    Mergia, K.; Chatzikos, V.; Manios, E.; Dellis, S.; Papadakis, D.; Terentyev, D.; Bonny, G.; Dubinko, A.; Stamatelatos, I. E.; Messoloras, S.; Rieth, M.
    2021. Fusion engineering and design, 172, Art.-Nr.: 112784. doi:10.1016/j.fusengdes.2021.112784
  446. Cylindrical inertial electrostatic confinement plasma source for surface treatment
    Tiedemann, D.; Hofmann, P.; Emmerlich, J.; Chan, Y.-A.; Ulrich, S.; Herdrich, G.; Müller, M.
    2021. Vacuum, 193, Art.-Nr.: 110502. doi:10.1016/j.vacuum.2021.110502
  447. Thermal shock behavior under deuterium plasma exposure of tungsten–tantalum alloys
    Nogami, S.; Wirtz, M.; Lied, P.; Chikada, T.
    2021. Physica scripta, 96 (11), Art.-Nr.: 114011. doi:10.1088/1402-4896/ac1702
  448. Recent studies to the impact of a ceramic breeder environment on the mechanical properties of EUROFER97 under operating conditions
    Gaisina, E.; Duerrschnabel, M.; Leys, J.; Knitter, R.; Aktaa, J.; Walter, M.
    2021, October 25. 20th International Conference on Fusion Reactor Materials (ICFRM-20 2021), Online, October 24–29, 2021
  449. Heterogeneous equilibria in the systems Mo-Si-Ti and Mo-Si-Ti-B
    Czerny, A.; Rohde, M.; Hausner, C.; Seifert, H. J.
    2021, October 7. Intermetallics (2021), Bad Staffelstein, Germany, October 4–8, 2021
  450. First-principles study of Mn antisite defect in LiMnO
    Zhang, S.; Wang, J.; Lei, T.; Li, X.; Liu, Y.; Guo, F.; Wang, J.; Zhang, W.; Dang, F.; Seifert, H.; Sun, L.; Du, Y.
    2021. Journal of physics / Condensed matter, 33 (41), Art.-Nr.: 415201. doi:10.1088/1361-648X/ac16f6
  451. High-temperature oxidation of silicon carbide composites for nuclear applications
    Steinbrück, M.; Große, M.; Stegmaier, U.; Braun, J.; Lorrette, C.
    2021. Proceedings of the TOPFUEL 2021 Conference
  452. Oxidation kinetics of nuclear-grade FeCrAl alloys in steam in the temperature range 600-1500°C
    Kim, C.; Tang, C.; Große, M.; Steinbrück, M.
    2021. Proceedings of TOPFUEL 2021 Conference
  453. Laser Additive Manufacturing for the Realization of New Material Concepts
    Pfleging, W.; Santos Solheid, J. dos
    2021. Bioengineering and Biomaterials in Ventricular Assist Devices, 271–295, CRC Press. doi:10.1201/9781003138358-16
  454. Design of NbN Based Kinetic Inductance Detectors for Polarimetric Plasma Diagnostics
    Mazzocchi, F.; Driessen, E.; Shu, S.; Merker, M.; Ilin, K.; Siegel, M.; Meier, A.; Strauß, D.; Scherer, T.
    2021. IEEE transactions on applied superconductivity, 31 (7), Art.-Nr. 2400407. doi:10.1109/TASC.2021.3102392
  455. 2D coherence imaging measurements of C ion temperatures in the divertor of Wendelstein 7-X
    W7-X Team; Gradic, D.; Perseo, V.; Kriete, D. M.; Krychowiak, M.; König, R.; Feng, Y.; Otte, M.; Pedersen, T. S.; Gao, Y.; Jakubowski, M.; Schlisio, G.; Warmer, F.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (10), 106041. doi:10.1088/1741-4326/ac25bf
  456. Overview of the results from divertor experiments with attached and detached plasmas at Wendelstein 7-X and their implications for steady-state operation
    W7-X Team; Jakubowski, M.; Endler, M.; Feng, Y.; Gao, Y.; Killer, C.; König, R.; Krychowiak, M.; Perseo, V.; Reimold, F.; Schmitz, O.; Pedersen, T. S.; Brezinsek, S.; Dinklage, A.; Drewelow, P.; Niemann, H.; Otte, M.; Gruca, M.; Hammond, K.; Kremeyer, T.; Kubkowska, M.; Jabłoński, S.; Pandey, A.; Wurden, G.; Zhang, D.; Bozhenkov, S.; Böckenhoff, D.; Dhard, C. P.; Baldzuhn, J.; Gradic, D.; Effenberg, F.; Kornejew, P.; Lazerson, S.; Lore, J.; Naujoks, D.; Puig Sitjes, A.; Schlisio, G.; Ślęczka, M.; Wenzel, U.; Winters, V.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (10), Artk.Nr.: 106003. doi:10.1088/1741-4326/ac1b68
  457. High-performance ECRH at W7-X: experience and perspectives
    W7-X Team; Laqua, H. P.; Baldzuhn, J.; Braune, H.; Bozhenkov, S.; Brunner, K.; Hirsch, M.; Hoefel, U.; Knauer, J.; Langenberg, A.; Marsen, S.; Moseev, D.; Pasch, E.; Rahbarnia, K.; Stange, T.; Wolf, R. C.; Pablant, N.; Grulke, O.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (10), Artk.Nr.: 106005. doi:10.1088/1741-4326/ac1a1b
  458. Optimization of modular and helical coils applying genetic algorithm and fully-three-dimensional B-spline curves
    W7-X Team; Yamaguchi, H.; Satake, S.; Nakata, M.; Shimizu, A.; Suzuki, Y.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (10), Artikl.Nr.: 106004. doi:10.1088/1741-4326/ac1ae2
  459. First attempt to quantify W7-X island divertor plasma by local experiment-model comparison
    W7-X Team; Feng, Y.; Gao, Y.; Kremeyer, T.; Gradic, D.; Rudischhauser, L.; Fuchert, G.; Bozhenkov, S.; Endler, M.; Jakubowski, M.; Koenig, R.; Krychowiak, M.; Pasch, E.; Hammond, K. C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (10), ArtNr.: 106018. doi:10.1088/1741-4326/ac2025
  460. Microstructure and precipitation behavior of advanced RAFM steels for high-temperature applications on fusion reactors
    Fernández, P.; Hoffmann, J.; Rieth, M.; Gómez-Herrero, A.
    2021. Materials Characterization, 180, Art.-Nr.: 111443. doi:10.1016/j.matchar.2021.111443
  461. Application of CVD Diamond disks for ECRH systems of fusion
    Schreck, S.; Aiello, G.; Meier, A.; Scherer, T.; Strauss, D.
    2021, September 28. 84. Jahrestagung der DPG und DPG-Tagung der Sektion Kondensierte Materie (SKM 2021), Online, September 27–October 1, 2021
  462. Integration of physics instruments of the ITER EC Upper Launcher
    Späh, P.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.
    2021, September 28. 84. Jahrestagung der DPG und DPG-Tagung der Sektion Kondensierte Materie (SKM 2021), Online, September 27–October 1, 2021
  463. Defect structures related to dielectric properties in diamon
    Scherer, T.; Aiello, G.; Schreck, S.; Meier, A.; Strauss, D.
    2021, September 28. 84. Jahrestagung der DPG und DPG-Tagung der Sektion Kondensierte Materie (SKM 2021), Online, September 27–October 1, 2021
  464. MPA CVD diamond in nuclear fusion: dielectric characterization and influence of defects
    Aiello, G.; Scherer, T.; Meier, A.; Schreck, S.; Strauss, D.
    2021, September 28. 84. Jahrestagung der DPG und DPG-Tagung der Sektion Kondensierte Materie (SKM 2021), Online, September 27–October 1, 2021
  465. Development of diamond based kinetic inductance detectors
    Mazzocchi, F.; Strauss, D.; Scherer, T.
    2021, September 28. 84. Jahrestagung der DPG und DPG-Tagung der Sektion Kondensierte Materie (SKM 2021), Online, September 27–October 1, 2021
  466. Der Spröd-duktil-Übergang in ultrafeinkörnigem Wolfram. PhD dissertation
    Bonnekoh, C.
    2021, September 17. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000137407
  467. Heterogeneous phase equilibria in the Mo-Si-Ti system
    Czerny, A.; Rohde, M.; Hausner, C.; Seifert, H. J.
    2021, September 16. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2021), Online, September 13–17, 2021
  468. Neutronics analyses of EU DEMO 2020 EC port configuration
    Čufar, A.; Bachmann, C.; Berry, T.; Chavan, R.; Eade, T.; Franke, T.; Kos, B.; Leichtle, D.; Spaeh, P.; Quang, T. M.
    2021, September 7. 30th International Conference Nuclear Energy for New Europe (NENE 2021), Bled, Slovenia, September 6–9, 2021
  469. Oxidation mechanism of refractory high entropy alloys Ta-Mo-Cr-Ti-Al with varying Ta content
    Schellert, S.; Gorr, B.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Christ, H. J.
    2021. Corrosion science, 192, Article no: 109861. doi:10.1016/j.corsci.2021.109861
  470. Proof of concept of a fast surrogate model of the VMEC code via neural networks in Wendelstein 7-X scenarios
    W7-X Team; Merlo, A.; Böckenhoff, D.; Schilling, J.; Höfel, U.; Kwak, S.; Svensson, J.; Pavone, A.; Lazerson, S. A.; Pedersen, T. S.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (9), Art.-Nr.: 096039. doi:10.1088/1741-4326/ac1a0d
  471. Turbulent transport in the scrape-off layer of Wendelstein 7-X
    W7-X Team; Killer, C.; Narbutt, Y.; Grulke, O.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (9), Art.-Nr.: 096038. doi:10.1088/1741-4326/ac1ae3
  472. An experimental characterization of core turbulence regimes in Wendelstein 7-X
    W7-X Team; Carralero, D.; Estrada, T.; Maragkoudakis, E.; Windisch, T.; Alonso, J. A.; Beurskens, M.; Bozhenkov, S.; Calvo, I.; Damm, H.; Ford, O.; Fuchert, G.; García-Regaña, J. M.; Pablant, N.; Sánchez, E.; Pasch, E.; Velasco, J. L.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (9), Art.Nr.: 096015. doi:10.1088/1741-4326/ac112f
  473. Impact of magnetic islands on plasma flow and turbulence in W7-X
    W7-X Team; Estrada, T.; Maragkoudakis, E.; Carralero, D.; Windisch, T.; Velasco, J. L.; Killer, C.; Andreeva, T.; Geiger, J.; Dinklage, A.; Krämer-Flecken, A.; Wurden, G. A.; Beurskens, M.; Bozhenkov, S.; Damm, H.; Fuchert, G.; Pasch, E.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (9), 096011. doi:10.1088/1741-4326/ac146f
  474. First neutral beam experiments on Wendelstein 7-X
    W7-X Team; Lazerson, S. A.; Ford, O.; Äkaslompolö, S.; Bozhenkov, S.; Slaby, C.; Vanó, L.; Spanier, A.; McNeely, P.; Rust, N.; Hartmann, D.; Poloskei, P.; Buttenschoゆ B.; Burhenn, R.; Tamura, N.; Bussiahn, R.; Wegner, T.; Drevlak, M.; Turkin, Y.; Ogawa, K.; Knauer, J.; Brunner, K. J.; Pasch, E.; Beurskens, M.; Damm, H.; Fuchert, G.; Nelde, P.; Scott, E.; Pablant, N.; Langenberg, A.; Traverso, P.; Valson, P.; Hergenhahn, U.; Pavone, A.; Rahbarnia, K.; Andreeva, T.; Schilling, J.; Brandt, C.; Neuner, U.; Thomsen, H.; Chaudhary, N.; Höefel, U.; Stange, T.; Weir, G.; Marushchenko, N.; Jakubowski, M.; Ali, A.; Gao, Y.; Niemann, H.; Puig Sitjes, A.; Koenig, R.; Schroeder, R.; den Harder, N.; Heinemann, B.; Hopf, C.; Riedl, R.; Wolf, R. C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (9), 096008. doi:10.1088/1741-4326/ac121c
  475. Modeling and measurement of energetic particle slowing down in Wendelstein 7-X
    W7-X Team; Lazerson, S. A.; Pfefferlé, D.; Drevlak, M.; Smith, H.; Geiger, J.; Äkäslompolo, S.; Xanthopoulos, P.; Dinklage, A.; Ford, O.; McNeely, P.; Rust, N.; Bozhenkov, S.; Hartmann, D.; Rahbarnia, K.; Andreeva, T.; Schilling, J.; Brandt, C.; Neuner, U.; Thomsen, H.; Wolf, R. C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (9), 096005. doi:10.1088/1741-4326/ac0771
  476. Steam oxidation of Cr-coated Sn-containing Zircaloy solid rod at 1000 °C
    Liu, J.; Cui, Z.; Hao, Z.; Ma, D.; Lu, J.; Cui, Y.; Li, C.; Liu, W.; Xie, S.; Hu, P.; Huang, P.; Bai, G.; Yun, D.
    2021. Corrosion Science, 190, Art.-Nr.: 109682. doi:10.1016/j.corsci.2021.109682
  477. Development of anti-permeation and corrosion barrier coatings for the WCLL breeding blanket of the European DEMO
    Utili, M.; Bassini, S.; Cataldo, S.; Di Fonzo, F.; Kordac, M.; Hernandez, T.; Kunzova, K.; Lorenz, J.; Martelli, D.; Padino, B.; Moroño, A.; Tarantino, M.; Schroer, C.; Spagnuolo, G. A.; Vala, L.; Vanazzi, M.; Venturini, A.
    2021. Fusion engineering and design, 170, Art.-Nr. 112453. doi:10.1016/j.fusengdes.2021.112453
  478. Characterization of aluminum-based coatings after short term exposure during irradiation campaign in the LVR-15 fission reactor
    Petráš, R.; Kunzová, K.; Fedoriková, A.; Kekrt, J.; Kordač, M.; Di Fonzo, F.; Paladino, B.; Schroer, C.; Lorenz, J.; Utili, M.; Vála, L.
    2021. Fusion Engineering and Design, 170, Art.-Nr.: 112521. doi:10.1016/j.fusengdes.2021.112521
  479. Single rod tests at KIT with Cr coated claddings
    Stuckert, J.; Stegmaier, U.; Vizelkova, K.
    2021, August 25. 1st Research Coordination Meeting on Testing, Modelling and Simulations for Accident Tolerant and Advanced Technology Fuels (2021), Online, August 23–27, 2021
  480. Laser structuring of NMC 811 high energy electrodes in battery production for enhancing the electrochemical performance for xEV energy storage systems
    Eschelmüller, B.; Froehlich, K.; Pessenhofer, W.; Besser, H.; Pfleging, W.; Jahn, M.; Pichler, F.
    2021. 22nd International Conference Advanced Batteries, Accumulators and Fuel Cells, 15–16, Brno University of Technology
  481. Characterization and qualification of damage-tolerant ceramic matrix composites for structural applications in hot gas turbines. PhD dissertation
    Markel, I. J.
    2021, August 19. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000136409
  482. Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C
    Chen, L.; Tsisar, V.; Wang, M.; Schroer, C.; Zhou, Z.
    2021. Corrosion science, 189, Article no: 109591. doi:10.1016/j.corsci.2021.109591
  483. Intrinsic Defects in LiMnO: First-Principles Calculations
    Li, X.; Wang, J.; Zhang, S.; Sun, L.; Zhang, W.; Dang, F.; Seifert, H. J.; Du, Y.
    2021. ACS omega, 6 (33), 21255–21264. doi:10.1021/acsomega.1c01162
  484. Investigation on the Phase Relationship and Solidification Processes of Mg-rich Mg-Mn-Y Alloys
    Chen, T.; Mo, L.; Yuan, Y.; Liu, J.; Wang, J.; Li, D.; Jiang, B.; Pan, F.
    2021. Journal of phase equilibria and diffusion, 42 (4), 441–451. doi:10.1007/s11669-021-00908-7
  485. Characterization of injection and confinement improvement through impurity induced profile modifications on the Wendelstein 7-X stellarator
    W7-X Team; Lunsford, R.; Killer, C.; Nagy, A.; Gates, D. A.; Klinger, T.; Dinklage, A.; Satheeswaran, G.; Kocsis, G.; Lazerson, S. A.; Nespoli, F.; Pablant, N. A.; Stechow, A. von; Alonso, A.; Andreeva, T.; Beurskens, M.; Biedermann, C.; Brezinsek, S.; Brunner, K. J.; Buttenschön, B.; Carralero, D.; Cseh, G.; Drewelow, P.; Effenberg, F.; Estrada, T.; Ford, O. P.; Grulke, O.; Hergenhahn, U.; Höefel, U.; Knauer, J.; Krause, M.; Krychowiak, M.; Kwak, S.; Langenberg, A.; Neuner, U.; Nicolai, D.; Pavone, A.; Puig Sitjes, A.; Rahbarnia, K.; Schilling, J.; Svensson, J.; Szepesi, T.; Thomsen, H.; Wauters, T.; Windisch, T.; Winters, V.; Zhang, D.; Zsuga, L.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Physics of plasmas, 28 (8), Art.-Nr.: 082506. doi:10.1063/5.0047274
  486. Demonstration of reduced neoclassical energy transport in Wendelstein 7-X
    W7-X Team; Beidler, C. D.; Smith, H. M.; Alonso, A.; Andreeva, T.; Baldzuhn, J.; Beurskens, M. N. A.; Borchardt, M.; Bozhenkov, S. A.; Brunner, K. J.; Damm, H.; Drevlak, M.; Ford, O. P.; Fuchert, G.; Geiger, J.; Helander, P.; Hergenhahn, U.; Hirsch, M.; Höfel, U.; Kazakov, Y. O.; Kleiber, R.; Krychowiak, M.; Kwak, S.; Langenberg, A.; Laqua, H. P.; Neuner, U.; Pablant, N. A.; Pasch, E.; Pavone, A.; Pedersen, T. S.; Rahbarnia, K.; Schilling, J.; Scott, E. R.; Stange, T.; Svensson, J.; Thomsen, H.; Turkin, Y.; Warmer, F.; Wolf, R. C.; Zhang, D.; Abramovic, I.; Äkäslompolo, S.; Alcusón, J.; Aleynikov, P.; Aleynikova, K.; Ali, A.; Alonso, A.; Anda, G.; Ascasibar, E.; Bähner, J. P.; Baek, S. G.; Balden, M.; Banduch, M.; Barbui, T.; Behr, W.; Benndorf, A.; Biedermann, C.; Biel, W.; Blackwell, B.; Blanco, E.; Blatzheim, M.; Ballinger, S.; Bluhm, T.; Böckenhoff, D.; Böswirth, B.; Böttger, L.-G.; Borsuk, V.; Boscary, J.; Bosch, H.-S.; Brakel, R.; Brand, H.; Brandt, C.; Bräuer, T.; Braune, H.; Brezinsek, S.; Brunner, K.-J.; Burhenn, R.; Bussiahn, R.; Buttenschön, B.; Bykov, V.; Cai, J.; Calvo, I.; Cannas, B.; Cappa, A.; Carls, A.; Carraro, L.; Carvalho, B.; Castejon, F.; Charl, A.; Chaudhary, N.; Chauvin, D.; Chernyshev, F.; Cianciosa, M.; Citarella, R.; Claps, G.; Coenen, J.; Cole, M.; Cole, M. J.; Cordella, F.; Cseh, G.; Czarnecka, A.; Czerski, K.; Czerwinski, M.; Czymek, G.; Molin, A. da; Silva, A. da; Pena, A. de la; Degenkolbe, S.; Dhard, C. P.; Dibon, M.; Dinklage, A.; Dittmar, T.; Drewelow, P.; Drews, P.; Durodie, F.; Edlund, E.; Effenberg, F.; Ehrke, G.; Elgeti, S.; Endler, M.; Ennis, D.; Esteban, H.; Estrada, T.; Fellinger, J.; Feng, Y.; Flom, E.; Fernandes, H.; Fietz, W. H.; Figacz, W.; Fontdecaba, J.; Fornal, T.; Frerichs, H.; Freund, A.; Funaba, T.; Galkowski, A.; Gantenbein, G.; Gao, Y.; García Regaña, J.; Gates, D.; Geiger, B.; Giannella, V.; Gogoleva, A.; Goncalves, B.; Goriaev, A.; Gradic, D.; Grahl, M.; Green, J.; Greuner, H.; Grosman, A.; Grote, H.; Gruca, M.; Grulke, O.; Guerard, C.; Hacker, P.; Han, X.; Harris, J. H.; Hartmann, D.; Hathiramani, D.; Hein, B.; Heinemann, B.; Helander, P.; Henneberg, S.; Henkel, M.; Hergenhahn, U.; Hernandez Sanchez, J.; Hidalgo, C.; Hollfeld, K. P.; Hölting, A.; Höschen, D.; Houry, M.; Howard, J.; Huang, X.; Huang, Z.; Hubeny, M.; Huber, M.; Hunger, H.; Ida, K.; Ilkei, T.; Illy, S.; Israeli, B.; Jablonski, S.; Jakubowski, M.; Jelonnek, J.; Jenzsch, H.; Jesche, T.; Jia, M.; Junghanns, P.; Kacmarczyk, J.; Kallmeyer, J.-P.; Kamionka, U.; Kasahara, H.; Kasparek, W.; Kenmochi, N.; Killer, C.; Kirschner, A.; Klinger, T.; Knauer, J.; Knaup, M.; Knieps, A.; Kobarg, T.; Kocsis, G.; Köchl, F.; Kolesnichenko, Y.; Könies, A.; König, R.; Kornejew, P.; Koschinsky, J.-P.; Köster, F.; Krämer, M.; Krampitz, R.; Krämer-Flecken, A.; Krawczyk, N.; Kremeyer, T.; Krom, J.; Ksiazek, I.; Kubkowska, M.; Kühner, G.; Kurki-Suonio, T.; Kurz, P. A.; Landreman, M.; Lang, P.; Lang, R.; Langish, S.; Laqua, H.; Laube, R.; Lazerson, S.; Lechte, C.; Lennartz, M.; Leonhardt, W.; Li, C.; Li, C.; Li, Y.; Liang, Y.; Linsmeier, C.; Liu, S.; Lobsien, J.-F.; Loesser, D.; Loizu Cisquella, J.; Lore, J.; Lorenz, A.; Losert, M.; Lücke, A.; Lumsdaine, A.; Lutsenko, V.; Maaßberg, H.; Marchuk, O.; Matthew, J. H.; Marsen, S.; Marushchenko, M.; Masuzaki, S.; Maurer, D.; Mayer, M.; McCarthy, K.; McNeely, P.; Meier, A.; Mellein, D.; Mendelevitch, B.; Mertens, P.; Mikkelsen, D.; Mishchenko, A.; Missal, B.; Mittelstaedt, J.; Mizuuchi, T.; Mollen, A.; Moncada, V.; Mönnich, T.; Morisaki, T.; Moseev, D.; Murakami, S.; Náfrádi, G.; Nagel, M.; Naujoks, D.; Neilson, H.; Neu, R.; Neubauer, O.; Ngo, T.; Nicolai, D.; Nielsen, S. K.; Niemann, H.; Nishizawa, T.; Nocentini, R.; Nührenberg, C.; Nührenberg, J.; Obermayer, S.; Offermanns, G.; Ogawa, K.; Ölmanns, J.; Ongena, J.; Oosterbeek, J. W.; Orozco, G.; Otte, M.; Pacios Rodriguez, L.; Panadero, N.; Panadero Alvarez, N.; Papenfuß, D.; Paqay, S.; Pawelec, E.; Pedersen, T. S.; Pelka, G.; Perseo, V.; Peterson, B.; Pilopp, D.; Pingel, S.; Pisano, F.; Plaum, B.; Plunk, G.; Pölöskei, P.; Porkolab, M.; Proll, J.; Puiatti, M.-E.; Puig Sitjes, A.; Purps, F.; Rack, M.; Récsei, S.; Reiman, A.; Reimold, F.; Reiter, D.; Remppel, F.; Renard, S.; Riedl, R.; Riemann, J.; Risse, K.; Rohde, V.; Röhlinger, H.; Romé, M.; Rondeshagen, D.; Rong, P.; Roth, B.; Rudischhauser, L.; Rummel, K.; Rummel, T.; Runov, A.; Rust, N.; Ryc, L.; Ryosuke, S.; Sakamoto, R.; Salewski, M.; Samartsev, A.; Sanchez, M.; Sano, F.; Satake, S.; Schacht, J.; Satheeswaran, G.; Schauer, F.; Scherer, T.; Schlaich, A.; Schlisio, G.; Schluck, F.; Schlüter, K.-H.; Schmitt, J.; Schmitz, H.; Schmitz, O.; Schmuck, S.; Schneider, M.; Schneider, W.; Scholz, P.; Schrittwieser, R.; Schröder, M.; Schröder, T.; Schroeder, R.; Schumacher, H.; Schweer, B.; Sereda, S.; Shanahan, B.; Sibilia, M.; Sinha, P.; Sipliä, S.; Slaby, C.; Sleczka, M.; Spiess, W.; Spong, D. A.; Spring, A.; Stadler, R.; Stejner, M.; Stephey, L.; Stridde, U.; Suzuki, C.; Szabó, V.; Szabolics, T.; Szepesi, T.; Szökefalvi-Nagy, Z.; Tamura, N.; Tancetti, A.; Terry, J.; Thomas, J.; Thumm, M.; Travere, J. M.; Traverso, P.; Tretter, J.; Trimino Mora, H.; Tsuchiya, H.; Tsujimura, T.; Tulipán, S.; Unterberg, B.; Vakulchyk, I.; Valet, S.; Vanó, L.; Eeten, P. van; Milligen, B. van; Vuuren, A. J. van; Vela, L.; Velasco, J.-L.; Vergote, M.; Vervier, M.; Vianello, N.; Viebke, H.; Vilbrandt, R.; Stechow, A. von; Vorköper, A.; Wadle, S.; Wagner, F.; Wang, E.; Wang, N.; Wang, Z.; Wauters, T.; Wegener, L.; Weggen, J.; Wegner, T.; Wei, Y.; Weir, G.; Wendorf, J.; Wenzel, U.; Werner, A.; White, A.; Wiegel, B.; Wilde, F.; Windisch, T.; Winkler, M.; Winter, A.; Winters, V.; Wolf, S.; Wolf, R. C.; Wright, A.; Wurden, G.; Xanthopoulos, P.; Yamada, H.; Yamada, I.; Yasuhara, R.; Yokoyama, M.; Zanini, M.; Zarnstorff, M.; Zeitler, A.; Zhang, H.; Zhu, J.; Zilker, M.; Zocco, A.; Zoletnik, S.; Zuin, M.
    2021. Nature <London>, 596 (7871), 221–226. doi:10.1038/s41586-021-03687-w
  487. Understanding detachment of the W7-X island divertor
    W7-X Team; Feng, Y.; Jakubowski, M.; König, R.; Krychowiak, M.; Otte, M.; Reimold, F.; Reiter, D.; Schmitz, O.; Zhang, D.; Beidler, C. D.; Biedermann, C.; Bozhenkov, S.; Brunner, K. J.; Dinklage, A.; Drewelow, P.; Effenberg, F.; Endler, M.; Fuchert, G.; Gao, Y.; Geiger, J.; Hammond, K. C.; Helander, P.; Killer, C.; Knauer, J.; Kremeyer, T.; Pasch, E.; Rudischhauser, L.; Schlisio, G.; Sunn Pedersen, T.; Wenzel, U.; Winters, V.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (8), 086012. doi:10.1088/1741-4326/ac0772
  488. Experimental and modelling results of the QUENCH-18 bundle experiment on air ingress, cladding melting and aerosol release
    Stuckert, J.; Steinbrueck, M.; Kalilainen, J.; Lind, T.; Birchley, J.
    2021. Nuclear engineering and design, 379, Art.-Nr.: 111267. doi:10.1016/j.nucengdes.2021.111267
  489. Steam Oxidation of Silicon Carbide at High Temperatures for the Application as Accident Tolerant Fuel Cladding, an Overview
    Pham, H. V.; Kurata, M.; Steinbrueck, M.
    2021. Thermo, 1 (2), 151–167. doi:10.3390/thermo1020011
  490. Non-destructive characterization of thermally sprayed cylinder coatings using laser-excited lock-in thermography. PhD dissertation
    Arbogast, J. M.
    2021, July 27. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000135527
  491. Thermal Characterization of Lithium-ion Cells with Positive Electrode Materials and their Components. PhD dissertation
    Zhao, W.
    2021, July 9. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000134970
  492. Ionic and Thermal Transport in Na-Ion-Conducting Ceramic Electrolytes
    Rohde, M.; Mohsin, I. U. I.; Ziebert, C.; Seifert, H. J.
    2021. International journal of thermophysics, 42 (10), Art.-Nr.: 136. doi:10.1007/s10765-021-02886-x
  493. Integration concept of an Electron Cyclotron System in DEMO
    Franke, T.; Aiello, G.; Avramidis, K.; Bachmann, C.; Baiocchi, B.; Baylard, C.; Bruschi, A.; Chauvin, D.; Cufar, A.; Chavan, R.; Gliss, C.; Fanale, F.; Figini, L.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Jelonnek, J.; López, G. S.; Moro, A.; Moscheni, M.; Rispoli, N.; Siccinio, M.; Spaeh, P.; Strauss, D.; Subba, F.; Tigelis, I.; Tran, M. Q.; Tsironis, C.; Wu, C.; Zohm, H.
    2021. Fusion Engineering and Design, 168, Art.-Nr.: 112653. doi:10.1016/j.fusengdes.2021.112653
  494. Hafnium Oxidation at High Temperature in Steam
    Guilbert-Banti, S.; Viretto, A.; Barrachin, M.; Tanguy, C.; Steinbrück, M.; Stuckert, J.
    2021. Journal of nuclear materials, 550, Art.Nr. 152901. doi:10.1016/j.jnucmat.2021.152901
  495. Thermodynamic investigation of oxidation of NiAl-(Cr, Mo) alloys used for manufacturing metal matrix composites by directional solidification. PhD dissertation
    Geramifard, G.
    2021, June 28. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000134322
  496. Ultrafast laser materials processing as a versatile manufacturing tool for developing next generation batteries
    Pfleging, W.
    2021, June 17. Lasers drive the Green Economy towards Net Zero - Association of Industrial Laser Users (2021), Online, June 17–18, 2021
  497. Advances in Al-, Cr-, and Zr-based Oxide Thin Films for Wear Applications in Harsh Environments
    Stüber, M.
    2021, June 15. 9th International Symposium on Functional Coatings and Surface Engineering (FCSE 2021), Online, June 14–17, 2021
  498. Electrochemical Deposition of Activating Interlayers for Joining of Tungsten and Steel by Brazing with Copper
    Lorenz, J.; Krauss, W.
    2021, June. Thermec’2021 : International Conference on Processing and Manufacturing of Advanced Materials - Processing, Fabrication, Properties, Applications (2021), Online, June 1–5, 2021
  499. Advances in Additive Manufacturing of fusion materials
    Neuberger, H.; Hernandez, F.; Ruck, S.; Arbeiter, F.; Bonk, S.; Rieth, M.; Stratil, L.; Müller, O.; Volker, K.-U.
    2021. Fusion engineering and design, 167, Art. Nr.: 112309. doi:10.1016/j.fusengdes.2021.112309
  500. Determination of poloidal mode numbers of MHD modes and their radial location using a soft x-ray camera array in the Wendelstein 7-X stellarator
    W7-X Team; Dreval, M. B.; Brandt, C.; Schilling, J.; Thomsen, H.; Beletskii, A.; Könies, A.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Plasma physics and controlled fusion, 63 (6), Art.-Nr.: 065006. doi:10.1088/1361-6587/abf449
  501. Thermographic reconstruction of heat load on the first wall of Wendelstein 7-X due to ECRH shine-through power
    W7-X Team; Corre, Y.; Gaspar, J.; Marsen, S.; Moseev, D.; Stange, T.; Boscary, J.; Drewelow, P.; Gao, Y.; Jakubowski, M.; Hillairet, J.; Laqua, H. P.; Lechte, C.; Moncada, V.; Niemann, H.; Preynas, M.; Puig Sitjes, A.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (6), Art.-Nr.: 066002. doi:10.1088/1741-4326/abebea
  502. Application of the elliptic approximation model for the edge turbulence rotation measurement via the poloidal correlation reflectometer in Wendelstein 7-X
    W7-X Team; Han, X.; Krämer-Flecken, A.; Xiang, H. M.; Vécsei, M.; Knieps, A.; Windisch, T.; Anda, G.; Andreeva, T.; Bozhenkov, S. A.; Geiger, J.; Dunai, D.; Trier, E.; Rahbarnia, K.; Zoletnik, S.; Liang, Y.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (6), Art.-Nr.: 066029. doi:10.1088/1741-4326/abfb15
  503. Wendelstein 7-X on the path to long-pulse high-performance operation
    W7-X Team; Endler, M.; Baldzuhn, J.; Beidler, C. D.; Bosch, H.-S.; Bozhenkov, S.; Buttenschön, B.; Dinklage, A.; Fellinger, J.; Feng, Y.; Fuchert, G.; Gao, Y.; Geiger, J.; Grulke, O.; Hartmann, D.; Jakubowski, M.; König, R.; Laqua, H. P.; Lazerson, S.; McNeely, P.; Naujoks, D.; Neuner, U.; Otte, M.; Pasch, E.; Sunn Pedersen, T.; Perseo, V.; Puig Sitjes, A.; Rahbarnia, K.; Rust, N.; Schmitz, O.; Spring, A.; Stange, T.; Stechow, A. von; Turkin, Y.; Wang, E.; Wolf, R. C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Fusion engineering and design, 167, Article: 112381. doi:10.1016/j.fusengdes.2021.112381
  504. Electro-Chemical Modelling of Laser Structured Electrodes
    Pichler, F.; Fröhlich, K.; Zheng, Y.; Pfleging, W.; Thaler, A.
    2021. Meeting abstracts, MA2021-01 (A02), Art.-Nr.: 183. doi:10.1149/ma2021-012183mtgabs
  505. Comprehensive Electrochemical, Calorimetric Heat Generation and Safety Analysis of NaMnO Cathode Material in Coin Cells
    Mohsin, I. U.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2021. Journal of the Electrochemical Society, 168 (5), Art.-Nr. 050544. doi:10.1149/1945-7111/ac0176
  506. Soft x-ray tomograms are consistent with the magneto-hydrodynamic equilibrium in the Wendelstein 7-X stellarator
    W7-X Team; Schilling, J.; Thomsen, H.; Brandt, C.; Kwak, S.; Svensson, J.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Plasma physics and controlled fusion, 63 (5), 055010. doi:10.1088/1361-6587/abe0fa
  507. Heat pulse propagation and anomalous electron heat transport measurements on the optimized stellarator W7-X
    W7-X Team; Weir, G. M.; Xanthopoulos, P.; Hirsch, M.; Höfel, U.; Stange, T.; Pablant, N.; Grulke, O.; Äkäslompolo, S.; Alcusón, J.; Bozhenkov, S.; Beurskens, M.; Dinklage, A.; Fuchert, G.; Geiger, J.; Landreman, M.; Langenberg, A.; Lazerson, S.; Marushchenko, N.; Pasch, E.; Schilling, J.; Scott, E. R.; Turkin, Y.; Klinger, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (5), 056001. doi:10.1088/1741-4326/abea55
  508. High temperature Cr-Zr interaction of two types of Cr-coated Zr alloys in inert gas environment
    Yang, J.; Stegmaier, U.; Tang, C.; Steinbrück, M.; Große, M.; Wang, S.; Seifert, H. J.
    2021. Journal of nuclear materials, 547, Art.-Nr. 152806. doi:10.1016/j.jnucmat.2021.152806
  509. Thermo-mechanical behavior of titanium beryllide pebble beds at ambient temperature
    Reimann, J.; Fretz, B.; Gaisin, R.; Goraieb, A.; Kim, J.-H.; Nakano, S.; Nakamichi, M.; Vladimirov, P.
    2021. Fusion engineering and design, 165, Art.-Nr. 112249. doi:10.1016/j.fusengdes.2021.112249
  510. Phase evolution during annealing of low-temperature co-evaporated precursors for CZTSe solar cell absorbers
    Mwakyusa, L. P.; Jin, X.; Müller, E.; Schneider, R.; Gerthsen, D.; Rinke, M.; Paetzold, U. W.; Richards, B. S.; Hetterich, M.
    2021. Journal of applied physics, 129 (15), Article no: 153104. doi:10.1063/5.0041320
  511. EMC3-EIRENE simulation of first wall recycling fluxes in W7-X with relation to H-alpha measurements
    W7-X Team; Winters, V. R.; Reimold, F.; König, R.; Krychowiak, M.; Romba, T.; Biedermann, C.; Bozhenkov, S.; Drewelow, P.; Endler, M.; Feng, Y.; Frerichs, H.; Fuchert, G.; Geiger, J.; Gao, Y.; Harris, J. H.; Jakubowski, M.; Kornejew, P.; Kremeyer, T.; Niemann, H.; Pasch, E.; Puig-Sitjes, A.; Schlisio, G.; Scott, E. R.; Wurden, G. A.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Plasma physics and controlled fusion, 63 (4), Art.-Nr. 045016. doi:10.1088/1361-6587/abe39c
  512. Correction and verification of x-ray imaging crystal spectrometer analysis on Wendelstein 7-X through x-ray ray tracing
    W7-X Team; Pablant, N. A.; Langenberg, A.; Alonso, J. A.; Bitter, M.; Bozhenkov, S. A.; Ford, O. P.; Hill, K. W.; Kring, J.; Marchuck, O.; Svensson, J.; Traverso, P.; Windisch, T.; Yakusevitch, Y.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Review of scientific instruments, 92 (4), Article no: 043530. doi:10.1063/5.0043513
  513. Design verification of the gyrotron diamond output window for the upgrade of the ECRH system at W7-X
    Aiello, G.; Avramidis, K. A.; Gantenbein, G.; Jelonnek, J.; Jin, J.; Laqua, H. P.; Meier, A.; Scherer, T.; Strauss, D.; Thumm, M.
    2021. Fusion engineering and design, 165, Article no: 112262. doi:10.1016/j.fusengdes.2021.112262
  514. Fundamental Interactions of Steels and Nickel-based Alloys with Lead-based Liquid Alloys or Liquid Tin
    Schroer, C.
    2021, March 15. 150th TMS Annual Meeting and Exhibition, Symposium on Corrosion in Heavy Liquid Metals for Energy Systems (TMS 2021), Online, March 15–18, 2021
  515. Laser Structuring of Composite Electrodes for Next-Generation Lithium-Ion Batteries
    Pfleging, W.
    2021, March 11. International Battery Seminar and Exhibit (2021), Orlando, FL, USA, March 9–11, 2021
  516. Recent Development of a 1.5 MW, 140 GHz Continuous-Wave Gyrotron for the Upgraded ECRH System at W7-X
    Illy, S.; Avramidis, K. A.; Ioannidis, Z. C.; Aiello, G.; Benin, P.; Chelis, I.; Dinklage, A.; Gantenbein, G.; Jelonnek, J.; Jin, J.; Laqua, H. P.; Leggieri, A.; Legrand, F.; Marek, A.; Marsen, S.; Pagonakis, I. G.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Wagner, D.; Weggen, J.; Wolf, R. C.
    2021. 2020 45th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Buffalo, NY, USA, 8-13 Nov. 2020, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz46771.2020.9370666
  517. Ultrafast laser structuring of Li(NiMnCo)O₂ cathodes for high energy and high power lithium-ion batteries
    Zhu, P.; Meyer, A.; Pfleging, W.
    2021, March 5. SPIE Photonics West LASE (SPIE LASE 2021), Online, March 6–12, 2021. doi:10.1117/12.2577569
  518. High power ultrafast laser processing of electrodes: Up-scaling in roll-to-roll environment
    Meyer, A.; Zhu, P.; Pfleging, W.
    2021, March 5. SPIE Photonics West LASE (SPIE LASE 2021), Online, March 6–12, 2021. doi:10.1117/12.2577196
  519. Development of the ion cyclotron emission diagnostic for the W7-X stellarator
    W7-X Team; Moseev, D.; Ochoukov, R.; Bobkov, V.; Dendy, R. O.; Faugel, H.; Hartmann, D.; Kallmeyer, J.-P.; Lansky, J.; Laqua, H. P.; Marsen, S.; McClements, K. G.; Nielsen, S. K.; Reintrog, A.; Salewski, M.; Schmidt, B. S.; Schulz, T.; Stange, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Review of scientific instruments, 92 (3), 033546. doi:10.1063/5.0040944
  520. Towards a 1.5 MW, 140 GHz gyrotron for the upgraded ECRH system at W7-X
    Avramidis, K. A.; Ioannidis, Z. C.; Aiello, G.; Bénin, P.; Chelis, I.; Dinklage, A.; Gantenbein, G.; Illy, S.; Jelonnek, J.; Jin, J.; Laqua, H. P.; Leggieri, A.; Legrand, F.; Marek, A.; Marsen, S.; Pagonakis, I. G.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Wagner, D.; Weggen, J.; Wolf, R. C.
    2021. Fusion engineering and design, 164, Art.-Nr.: 112173. doi:10.1016/j.fusengdes.2020.112173
  521. Exchange coupling and natural ferromagnetic resonance phenomena in Fe₄₀Co₃₇Zr₁₁N₁₂/ZrN/Ni₈₀Fe₂₀ film systems with in-plane uniaxial anisotropy
    Seemann, K.
    2021. Journal of magnetism and magnetic materials, 529, 167850–167858. doi:10.1016/j.jmmm.2021.167850
  522. Comparison of K-doped and pure cold-rolled tungsten sheets: Tensile properties and brittle-to-ductile transition temperatures
    Lied, P.; Pantleon, W.; Bonnekoh, C.; Bonk, S.; Hoffmann, A.; Reiser, J.; Rieth, M.
    2021. Journal of nuclear materials, 544, Art.-Nr.: 152664. doi:10.1016/j.jnucmat.2020.152664
  523. Plastic deformation in advanced tungsten-based alloys for fusion applications studied by mechanical testing and TEM
    Dubinko, A.; Yin, C.; Terentyev, D.; Zinovev, A.; Rieth, M.; Antusch, S.; Vilémová, M.; Matějíček, J.; Zhang, T.
    2021. International journal of refractory metals & hard materials, 95, Art.-Nr.: 105409. doi:10.1016/j.ijrmhm.2020.105409
  524. Ab initio study of hydrogen diffusion in Be and BeTi for fusion applications
    Bachurin, D. V.; Stihl, C.; Vladimirov, P. V.
    2021. Computational materials science, 187, Art.-Nr.: 109921. doi:10.1016/j.commatsci.2020.109921
  525. Characterization of the Microstructure After Composite Peening of Aluminum
    Seitz, M.; Dürrschnabel, M.; Kauffmann, A.; Kurpiers, C.; Greiner, C.; Weidenmann, K. A.
    2021. Advanced engineering materials, 23 (2), Art.Nr. 2000575. doi:10.1002/adem.202000575
  526. Nanostabilisation of tetragonal distorted FeCo variants in ultra-thin FeCo/TiN multilayer films
    Wolff, N.; Jordt, P.; Jetter, J.; Vogt, H.; Lotnyk, A.; Seemann, K.; Ulrich, S.; Quandt, E.; Murphy, B. M.; Kienle, L.
    2021. Materials characterization, 172, Article no: 110871. doi:10.1016/j.matchar.2021.110871
  527. Powder Particle Size Effects on Microstructure and Mechanical Properties of Mechanically Alloyed ODS Ferritic Steels
    Oñoro, M.; Macías-Delgado, J.; Auger, M. A.; Hoffmann, J.; Castro, V. de; Leguey, T.
    2021. Metals, 12 (1), Art. Nr.: 69. doi:10.3390/met12010069
  528. Catalytic Hydrogen Evolution of NaBH Hydrolysis by Cobalt Nanoparticles Supported on Bagasse-Derived Porous Carbon
    Bu, Y.; Liu, J.; Chu, H.; Wei, S.; Yin, Q.; Kang, L.; Luo, X.; Sun, L.; Xu, F.; Huang, P.; Rosei, F.; Pimerzin, A. A.; Seifert, H. J.; Du, Y.; Wang, J.
    2021. Nanomaterials, 11 (12), Art.-Nr.: 3259. doi:10.3390/nano11123259
  529. Metadata schema to support FAIR data in scanning electron microscopy
    Joseph, R.; Chauhan, A.; Eschke, C.; Ihsan, A. Z.; Jalali, M.; Jäntsch, U.; Jung, N.; Shyam Kumar, C. N.; Kübel, C.; Lucas, C.; Mail, M.; Mazilkin, A.; Neidiger, C.; Panighel, M.; Sandfeld, S.; Stotzka, R.; Thelen, R.; Aversa, R.
    2021. Supplementary Proceedings of the XXIII International Conference on Data Analytics and Management in Data Intensive Domains (DAMDID/RCDL 2021): Moscow, Russia, October 26-29, 2021. Ed.: A. Pozanenko, 265–277, CEUR-WS.org
  530. The Effect of Silicon Grade and Electrode Architecture on the Performance of Advanced Anodes for Next Generation Lithium-Ion Cells
    Meyer, A.; Ball, F.; Pfleging, W.
    2021. Nanomaterials, (11), 3448 (27 pages). doi:10.3390/nano11123448
  531. Electrochemical Performance of Thick-Film Li(NiMnCo)O Cathode with Hierarchic Structures and Laser Ablation
    Song, Z.; Zhu, P.; Pfleging, W.; Sun, J.
    2021. Nanomaterials, 11 (11), 2962. doi:10.3390/nano11112962
  532. Microstructural features in additively manufactured EUROFER97 components
    Bonk, S.; Dürrschnabel, M.; Neuberger, H.; Simondon, E.; Rieth, M.
    2021. Fusion engineering and design, 173, Art.Nr.: 112813. doi:10.1016/j.fusengdes.2021.112813
  533. Graded PVD Mo-Si interlayer between Si coating and Mo-Si-B alloys: Investigation of oxidation behaviour
    Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Schulz, U.
    2021. Corrosion Science, 192, Art.-Nr.: 109843. doi:10.1016/j.corsci.2021.109843
  534. Influence of Grain Orientation Distribution on the High Temperature Fatigue Behaviour of Notched Specimen Made of Polycrystalline Nickel-Base Superalloy
    Engel, B.; Ohneseit, S.; Mäde, L.; Beck, T.
    2021. Metals, 11 (5), 731. doi:10.3390/met11050731
  535. Current Severe Accident Researches in Germany
    Gaus-Liu, X.; Stuckert, J.
    2021. 28th International Conference on Nuclear Engineering (ICONE 2021), Online, August 4–6, 2021
  536. Large Area Diamond Disk Growth Experiments and Thermomechanical Investigations for the Broadband Brewster Window in DEMO
    Aiello, G.; Avramidis, K. A.; Franke, T.; Gantenbein, G.; Jelonnek, J.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Thumm, M.; Tran, M. Q.; Wild, C.; Woerner, E.
    2021. IEEE Transactions on Electron Devices, 68 (9), 4669–4674. doi:10.1109/TED.2021.3088077
  537. Microstructure tailoring of Al-containing compositionally complex alloys by controlling the sequence of precipitation and ordering
    Laube, S.; Schellert, S.; Srinivasan Tirunilai, A.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
    2021. Acta Materialia, 218, Article no: 117217. doi:10.1016/j.actamat.2021.117217
  538. Characterization and Laser Structuring of Aqueous Processed Li(NiMnCo)O Thick-Film Cathodes for Lithium-Ion Batteries
    Zhu, P.; Han, J.; Pfleging, W.
    2021. Nanomaterials, 11 (7), Art.-Nr.: 1840. doi:10.3390/nano11071840
  539. Mechanical properties of tungsten: Recent research on modified tungsten materials in Japan
    Nogami, S.; Hasegawa, A.; Fukuda, M.; Rieth, M.; Reiser, J.; Pintsuk, G.
    2021. Journal of nuclear materials, 543, Art.-Nr.: 152506. doi:10.1016/j.jnucmat.2020.152506
  540. The Effect of Al on the Formation of a CrTaO₄ Layer in Refractory High Entropy Alloys Ta-Mo-Cr-Ti-xAl
    Schellert, S.; Gorr, B.; Christ, H.-J.; Pritzel, C.; Laube, S.; Kauffmann, A.; Heilmaier, M.
    2021. Oxidation of metals, 96, 333–345. doi:10.1007/s11085-021-10046-7
  541. In Situ Neutron Radiography Investigations of Hydrogen Related Processes in Zirconium Alloys
    Grosse, M.; Schillinger, B.; Kaestner, A.
    2021. Applied Sciences, 11 (13), Art.-Nr.: 5775. doi:10.3390/app11135775
  542. Spatial activity profiling along a fixed bed of powder catalyst during selective oxidation of propylene to acrolein
    Stehle, M.; Sheppard, T. L.; Thomann, M.; Fischer, A.; Besser, H.; Pfleging, W.; Grunwaldt, J.-D.
    2021. Catalysis science & technology, 11, 5781–5790. doi:10.1039/D1CY00553G
  543. Neutron irradiation tolerance of potassium-doped and rhenium-alloyed tungsten
    Nogami, S.; Terentyev, D.; Zinovev, A.; Yin, C.; Rieth, M.; Pintsuk, G.; Hasegawa, A.
    2021. Journal of Nuclear Materials, 553, Art.-Nr.: 153009. doi:10.1016/j.jnucmat.2021.153009
  544. A multiscale study of the production and recombination of closely correlated defects from irradiation-induced higher order recoils in beryllium
    Stihl, C.; Kumar, R.; Vladimirov, P. V.; Möslang, A.
    2021. Computational Materials Science, 195, Art.-Nr.: 110403. doi:10.1016/j.commatsci.2021.110403
  545. Technological aspects in blanket design: Effects of micro-alloying and thermo-mechanical treatments of EUROFER97 type steels after neutron irradiation
    Rieth, M.; Simondon, E.; Pintsuk, G.; Aiello, G.; Henry, J.; Terentyev, D.; Puype, A.; Cristalli, C.; Pilloni, L.; Tassa, O.; Klimenkov, M.; Schneider, H.-C.; Fernandez, P.; Gräning, T.; Chen, X.; Bhattacharya, A.; Reed, J.; Geringer, J. W.; Sokolov, M.; Katoh, Y.; Snead, L.
    2021. Fusion Engineering and Design, 168, Art.-Nr.: 112645. doi:10.1016/j.fusengdes.2021.112645
  546. High-temperature oxidation and hydrothermal corrosion of textured CrAlC-based coatings on zirconium alloy fuel cladding
    Tang, C.; Große, M.; Ulrich, S.; Klimenkov, M.; Jäntsch, U.; Seifert, H. J.; Stüber, M.; Steinbrück, M.
    2021. Surface and Coatings Technology, 419, Art.-Nr.: 127263. doi:10.1016/j.surfcoat.2021.127263
  547. A review: Learning from the flight of beetles
    Song, Z.; Tong, J.; Pfleging, W.; Sun, J.
    2021. Computers in Biology and Medicine, 133, Art.-Nr.: 104397. doi:10.1016/j.compbiomed.2021.104397
  548. Spatially‐resolved insights into local activity and structure of Ni‐based CO₂ methanation catalysts in fixed‐bed reactors
    Serrer, M.-A.; Stehle, M.; Schulte, M. L.; Besser, H.; Pfleging, W.; Saraci, E.; Grunwaldt, J.-D.
    2021. ChemCatChem, 13 (13), 3010–3020. doi:10.1002/cctc.202100490
  549. Development of Cr-C-Al based coatings for enhanced accident tolerant fuel (ATF) zirconium-based alloy cladding
    Tang, C.; Grosse, M.; Steinbrück, M.; Ulrich, S.; Seifert, H. J.; Stüber, M.
    2021. TopFuel (2021), Santander, Spain, October 24–28, 2021
  550. Investigation of TESPEL cloud dynamics in Wendelstein 7-X stellarator
    W7-X Team; Kocsis, G.; Tamura, N.; Bussiahn, R.; McCarthy, K.; Baldzuhn, J.; Biedermann, C.; Cseh, G.; Damm, H.; Kornejew, P.; König, R.; Panadero, N.; Szepesi, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (1). doi:10.1088/1741-4326/abbc84
  551. New insights into microstructure of neutron-irradiated tungsten
    Dürrschnabel, M.; Klimenkov, M.; Jäntsch, U.; Rieth, M.; Schneider, H. C.; Terentyev, D.
    2021. Scientific Reports, 11 (1), Art.-Nr.: 7572. doi:10.1038/s41598-021-86746-6
  552. The High-Solution Design of Magnesium Alloys
    Wang, J.; Yuan, Y.; Cheng, X.; Chen, T.; Jiang, B.; Li, D.; Tang, A.; Boll, T.; Pan, F.
    2021. Magnesium Technology 2021. Ed.: V. M. Miller, 27–31, Springer. doi:10.1007/978-3-030-65528-0_5
  553. Diffusion behaviour and mechanical properties of binary Mg–Gd system
    Yang, L.; Yuan, Y.; Chen, T.; Dai, X.; Zhang, L.; Li, D.; Tang, A.; Yi, W.; Zhang, L.; Pan, F.
    2021. Intermetallics, 133, Art.-Nr.: 107171. doi:10.1016/j.intermet.2021.107171
  554. Microstructure and hardening induced by neutron irradiation in single crystal, ITER specification and cold rolled tungsten
    Dubinko, A.; Terentyev, D.; Yin, C.; Renterghem, W. Van; Rossaert, B.; Rieth, M.; Zhurkin, E. E.; Zinovev, A.; Chang, C. C.; Van Dyck, S.; Bonny, G.
    2021. International Journal of Refractory Metals and Hard Materials, 98, Art.-Nr.: 105522. doi:10.1016/j.ijrmhm.2021.105522
  555. DEMO structural materials qualification and development
    Gorley, M.; Aiello, G.; Henry, J.; Nozawa, T.; Pintsuk, G.; Rieth, M.; Tanigawa, H.
    2021. Fusion Engineering and Design, 170, Art.-Nr.: 112513. doi:10.1016/j.fusengdes.2021.112513
  556. Technology readiness assessment of materials for DEMO in-vessel applications
    Richardson, M.; Gorley, M.; Wang, Y.; Aiello, G.; Pintsuk, G.; Gaganidze, E.; Richou, M.; Henry, J.; Vila, R.; Rieth, M.
    2021. Journal of Nuclear Materials, 550, Art.-Nr.: 152906. doi:10.1016/j.jnucmat.2021.152906
  557. Infrared emissivity of reduced-activation Eurofer 97 for fusion reactor applications
    Echániz, T.; Arrieta, I. G. de; Gil-Muñoz, A.; Fernández-Pereda, J.; Fuente, R.; Klimenkov, M.; López, G. A.
    2021. Journal of Nuclear Materials, 549, Art.-Nr.: 152907. doi:10.1016/j.jnucmat.2021.152907
  558. Fundamental Interactions of Steels and Nickel‐based Alloys with Lead‐based Liquid Alloys or Liquid Tin
    Schroer, C.
    2021. TMS 2021, 150th Annual Meeting & Exhibition, 15th - 18th March, 2021, Supplemental Proceedings. Ed.: The Minerals, Metals & Materials Society, 642–656, Springer US. doi:10.1007/978-3-030-65261-6_58
  559. Mechanism of remote vacancy emergence by a supersonic crowdion cluster in a 2D Morse lattice
    Shepelev, I. A.; Bachurin, D. V.; Korznikova, E. A.; Bayazitov, A. M.; Dmitriev, S. V.
    2021. Chinese Journal of Physics, 70, 355–362. doi:10.1016/j.cjph.2021.01.010
  560. An up-conversion luminophore with high quantum yield and brightness based on BaF:Yb,Er single crystals
    Madirov, E. I.; Konyushkin, V. A.; Nakladov, A. N.; Fedorov, P. P.; Bergfeldt, T.; Busko, D.; Howard, I. A.; Richards, B. S.; Kuznetsov, S. V.; Turshatov, A.
    2021. Journal of materials chemistry / C, 9 (10), 3493–3503. doi:10.1039/d1tc00104c
  561. Thermophysical Characterization of a Layered P2 Type Structure Na₀.₅₃MnO₂Cathode Material for Sodium Ion Batteries
    Mohsin, I. U.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2021. Batteries, 7 (1), Article no: 16. doi:10.3390/batteries7010016
  562. Current Status of Research on the Oxidation Behavior of Refractory High Entropy Alloys
    Gorr, B.; Schellert, S.; Müller, F.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
    2021. Advanced engineering materials, 23 (5), Art.-Nr.: 2001047. doi:10.1002/adem.202001047
  563. Effect of Mn Addition on Melt Purification and Fe Tolerance in Mg Alloys
    Chen, T.; Yuan, Y.; Liu, T.; Li, D.; Tang, A.; Chen, X.; Schmid-Fetzer, R.; Pan, F.
    2021. JOM, 73, 892–902. doi:10.1007/s11837-020-04550-5
  564. Quantification of erosion pattern using picosecond-LIBS on a vertical divertor target element exposed in W7-X
    W7-X Team; Zhao, D.; Yi, R.; Eksaeva, A.; Oelmann, J.; Brezinsek, S.; Sergienko, G.; Rasinski, M.; Gao, Y.; Mayer, M.; Dhard, C. P.; Naujoks, D.; Cai, L.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2021. Nuclear fusion, 61 (1), Art.-Nr.: 016025. doi:10.1088/1741-4326/abc408
  565. The high-temperature oxidation resistance properties of magnesium alloys alloyed with Gd and Ca
    Wu, J.; Yuan, Y.; Yu, X.; Chen, T.; Li, D.; Wu, L.; Jiang, B.; Atrens, A.; Pan, F.
    2021. Journal of materials science, 49, 8745–8761. doi:10.1007/s10853-020-05758-1
  566. Bubble-to-void transition promoted by oxide nanoparticles in ODS-EUROFER steel ion implanted to high He content
    Emelyanova, O.; Gentils, A.; Borodin, V. A.; Ganchenkova, M. G.; Vladimirov, P. V.; Dzhumaev, P. S.; Golovchanskiy, I. A.; Lindau, R.; Möslang, A.
    2021. Journal of nuclear materials, 545, Art.-Nr.: 152724. doi:10.1016/j.jnucmat.2020.152724
  567. Effect of oxygen concentration in static Pb–Bi eutectic on corrosion mode of aluminum-alloyed austenitic steels at 550°C for 1000 h
    Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Schroer, C.
    2021. Materials science forum, (1024), 79–85. doi:10.4028/www.scientific.net/MSF.1024.79
  568. New Insights into Phase Equilibria of the Sb-Sn System
    Borzone, G.; Delsante, S.; Li, D.; Novakovic, R.
    2021. Journal of phase equilibria and diffusion, 42, 63–76. doi:10.1007/s11669-020-00849-7
  569. External magnetic field guiding in HiPIMS to control sp fraction of tetrahedral amorphous carbon films
    Akhavan, B.; Ganesan, R.; Bathgate, S.; McCulloch, D. G.; Partridge, J. G.; Ionsecu, M.; Mathews, D. T. A.; Stueber, M.; Ulrich, S.; McKenzie, D. R.; Bilek, M. M. M.
    2021. Journal of physics / D, 54 (4), Art.-Nr.: 045002. doi:10.1088/1361-6463/abb9d2
  570. Development and characterization of advanced neutron multiplier materials
    Vladimirov, P. V.; Chakin, V. P.; Dürrschnabel, M.; Gaisin, R.; Goraieb, A.; Gonzalez, F. A. H.; Klimenkov, M.; Rieth, M.; Rolli, R.; Zimber, N.; Udartsev, S.; Kolmakov, M.; Vechkutov, A.; Frants, E.
    2021. Journal of nuclear materials, 543, Art. Nr.: 152593. doi:10.1016/j.jnucmat.2020.152593
  571. Assessment of multiscale hydrogen desorption models from (0001) Be surfaces
    Stihl, C.; Vladimirov, P. V.; Möslang, A.
    2021. Journal of nuclear materials, 543, Art. Nr.: 152595. doi:10.1016/j.jnucmat.2020.152595
  572. Improved performance of high-voltage Li-ion batteries using a novel chemically activated coating process
    Mereacre, V.; Bohn, N.; Müller, M.; Indris, S.; Bergfeldt, T.; Binder, J. R.
    2021. Materials research bulletin, 134, Art.-Nr.: 111095. doi:10.1016/j.materresbull.2020.111095
  573. Modeling of Atmospheric-Pressure Dielectric Barrier Discharges in Argon with Small Admixtures of Tetramethylsilane
    Loffhagen, D.; Becker, M. M.; Czerny, A. K.; Klages, C.-P.
    2021. Plasma chemistry and plasma processing, 41, 289–334. doi:10.1007/s11090-020-10121-y
  574. Preliminary validation of ASTEC V2.2.b with the QUENCH-20 BWR bundle experiment
    Murat, O.; Sanchez-Espinoza, V.; Wang, S.; Stuckert, J.
    2020. Nuclear engineering and design, 370, 110931. doi:10.1016/j.nucengdes.2020.110931
  575. Thermochemical and electrochemical investigations of Li(Ni,Mn,Co)O (NMC) as positive electrode material for lithium-ion batteries. PhD dissertation
    Masoumi, M.
    2020, December 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000126623
  576. Tritium release and retention in beryllium pebbles irradiated up to 640 appm tritium and 6000 appm helium
    Chakin, V.; Rolli, R.; Klimenkov, M.; Zmitko, M.
    2020. Journal of nuclear materials, 542, Art.-Nr.: 152521. doi:10.1016/j.jnucmat.2020.152521
  577. Investigation of the sedimentation behaviour of micron-sized particles in aqueous suspension for high velocity suspension flame spraying
    Loskyll, S.; Ulrich, S.; Sterk, V.; Rathgeber, S.
    2020. Surface and coatings technology, 404, Art.-Nr.: 126453. doi:10.1016/j.surfcoat.2020.126453
  578. Evolution of the carbon nanotube bundle structure under biaxial and shear strains
    Rysaeva, L. K.; Bachurin, D. V.; Murzaev, R. T.; Abdullina, D. U.; Korznikova, E. A.; Mulyukov, R. R.; Dmitriev, S. V.
    2020. Facta Universitatis / Series mechanical engineering, 18 (4), 525–536. doi:10.22190/FUME201005043R
  579. FEM analyses of the ITER EC H&CD torus diamond window unit towards the prototyping activity
    Aiello, G.; Casal, N.; Estébanez, P.; Gràcia, V.; Henderson, M.; Meier, A.; Saibene, G.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.
    2020. Fusion engineering and design, 161, Article no: 112052. doi:10.1016/j.fusengdes.2020.112052
  580. A review on current anode materials for rechargeable Mg batteries
    Li, D.; Yuan, Y.; Liu, J.; Fichtner, M.; Pan, F.
    2020. Journal of magnesium and alloys, 8 (4), 963–979. doi:10.1016/j.jma.2020.09.017
  581. Structural pre-conceptual design studies for an EU DEMO equatorial EC port plug and its port integration
    Spaeh, P.; Bachmann, C.; Chavan, R.; Cufar, A.; Franke, T.; Strauss, D.; Tran, M. Q.
    2020. Fusion engineering and design, 161, Article: 111885. doi:10.1016/j.fusengdes.2020.111885
  582. The brittle-to-ductile transition in cold-rolled tungsten sheets: Contributions of grain and subgrain boundaries to the enhanced ductility after pre-deformation
    Bonnekoh, C.; Lied, P.; Zaefferer, S.; Jäntsch, U.; Hoffmann, A.; Reiser, J.; Rieth, M.
    2020. Nuclear materials and energy, 25, Art.-Nr. 100769. doi:10.1016/j.nme.2020.100769
  583. The brittle-to-ductile transition in cold-rolled tungsten sheets: On the loss of room-temperature ductility after annealing and the phenomenon of 45° embrittlement
    Bonnekoh, C.; Lied, P.; Pantleon, W.; Karcher, T.; Leiste, H.; Hoffmann, A.; Reiser, J.; Rieth, M.
    2020. International journal of refractory metals & hard materials, 93, Art.-Nr.: 105347. doi:10.1016/j.ijrmhm.2020.105347
  584. Oxidation behaviour of NiAl intermetallics with embedded Cr and Mo
    Geramifard, G.; Gombola, C.; Franke, P.; Seifert, H. J.
    2020. Corrosion science, 177, Art. Nr.: 108956. doi:10.1016/j.corsci.2020.108956
  585. Battery calorimetric analysis of aging effects on the safety and thermal behavior of cylindrical lithium-ion cells
    Ziebert, C.; Ohneseit, S.; Freis, D.; Lin, Z.; Uhlmann, N.; Seifert, H. J.
    2020, November 28. Materials Research Society Fall Meeting and Exhibit (MRS 2020), Online, November 28–December 4, 2020
  586. Thermal wave interferometry measurements correlated to microstructural properties and bonding behavior of thermally sprayed coatings
    Arbogast, J.; Schaller, R.; Rohde, M.; Seifert, H. J.
    2020. Surface and coatings technology, 402, Art.-Nr.: 126298. doi:10.1016/j.surfcoat.2020.126298
  587. Additive laser barcode printing on high reflective stainless steel
    Mihalev, M. S.; Hardalov, C. M.; Christov, C. G.; Rinke, M.; Leiste, H.; Schneider, J.
    2020. Acta polytechnica, 60 (5), 435–439. doi:10.14311/AP.2020.60.0435
  588. Recent Development of a 1.5 MW, 140 GHz Continuous-Wave Gyrotron for the Upgraded ECRH System at W7-X
    W7-X Team; Illy, S.; Avramidis, K. A.; Ioannidis, Z. C.; Aiello, G.; Bénin, P.; Chelis, I.; Dinklage, A.; Gantenbein, G.; Jelonnek, J.; Jin, J.; Laqua, H. P.; Leggieri, A.; Legrand, F.; Marek, A.; Marsen, S.; Pagonakis, I. G.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Wagner, D.; Weggen, J.; Wolf, R. C.
    2020, November 13. 45th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2020), Online, November 8–13, 2020
  589. First measurements of NbN based KIDs for polarimetric plasma diagnostics
    Mazzocchi, F.; Strauss, D.; Scherer, T.
    2020. 2020 45th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), 8-13 November 2020, online, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz46771.2020.9370537
  590. First measurements of NbN based KIDs for polarimetric plasma diagnostics
    Mazzocchi, F.; Strauß, D.; Scherer, T.
    2020, November. 45th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2020), Online, November 8–13, 2020
  591. Fabrication of HCPB breeding blanket components using the additive manufacturing processes of selective laser melting and cold spray
    Neuberger, H.; Hernandez, F.; Rey, J.; Bonk, S.; Rieth, M.; Koch, J.; Schmalisch, B.; Müller, O.; Volker, K.-U.; Volker, D.; Leyh, S.; Niewöhner, R.; Brenner, A.
    2020. Fusion engineering and design, 160, Article: 112026. doi:10.1016/j.fusengdes.2020.112026
  592. Investigation of mode activity in NBI-heated experiments of Wendelstein 7-X
    W7-X Team; Slaby, C.; Äkäslompolo, S.; Borchardt, M.; Geiger, J.; Kleiber, R.; Könies, A.; Bozhenkov, S.; Brandt, C.; Dinklage, A.; Dreval, M.; Ford, O.; Fuchert, G.; Hartmann, D.; Hirsch, M.; Höfel, U.; Huang, Z.; McNeely, P.; Pablant, N.; Rahbarnia, K.; Rust, N.; Schilling, J.; Stechow, A. von; Thomsen, H.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Nuclear fusion, 60 (11), 112004. doi:10.1088/1741-4326/ab7c28
  593. Effect of Steels on the Purity of Molten Mg Alloys
    Chen, T.; Xiong, X.; Yuan, Y.; Tang, A.; Li, D.; Atrens, A.; Pan, F.
    2020. Advanced engineering materials, 22 (11), Art.-Nr.: 2000338. doi:10.1002/adem.202000338
  594. Investigation of a high-dose irradiated beryllium microstructure
    Zimber, N.; Vladimirov, P.; Klimenkov, M.; Kuksenko, V.
    2020. Journal of nuclear materials, 540, Art. Nr.: 152374. doi:10.1016/j.jnucmat.2020.152374
  595. High Performance Electrode Architectures By Laser Structuring of Silicon-Graphite Anodes and Ultra-Thick Film NMC-Type Cathode Materials
    Pfleging, W.; Zheng, Y.; Zhu, P.; Meyer, A.; Li, J.; Wood III, D. L.; Smyrek, P.
    2020, October 8. Pacific Rim Meeting on Electrochemical and Solid State Science (PRiME 2020), Honolulu, HI, USA, October 4–9, 2020. doi:10.1149/MA2020-021146mtgabs
  596. Elemental Mapping of Entire Thick Film Electrodes By Laser-Induced Breakdown Spectroscopy
    Smyrek, P.; Liu, X. M.; Arnold, C. B.; Seifert, H. J.; Pfleging, W.
    2020, October 7. Pacific Rim Meeting on Electrochemical and Solid State Science (PRiME 2020), Honolulu, HI, USA, October 4–9, 2020. doi:10.1149/MA2020-02195mtgabs
  597. Thermal Limits of Promising Candidate Materials for Accident Tolerant Fuel Claddings
    Große, M.
    2020, October 5. 2020 International Conference on Development and Applications of Nuclear Technologies (NuTech 2020), Online, October 4–7, 2020
  598. Progress in thermal management and safety of cells and packs by testing in battery calorimeters
    Ziebert, C.; Uhlmann, N.; Rohde, M.; Seifert, H. J.
    2020, October 4. Pacific Rim Meeting on Electrochemical and Solid State Science (PRiME 2020), Honolulu, HI, USA, October 4–9, 2020
  599. ECCD-induced sawtooth crashes at W7-X
    W7-X Team; Zanini, M.; Laqua, H. P.; Thomsen, H.; Stange, T.; Brandt, C.; Braune, H.; Brunner, K. J.; Fuchert, G.; Hirsch, M.; Knauer, J.; Höfel, U.; Marsen, S.; Pasch, E.; Rahbarnia, K.; Schilling, J.; Turkin, Y.; Wolf, R. C.; Zocco, A.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Nuclear fusion, 60 (10), Article no: 106021. doi:10.1088/1741-4326/aba72b
  600. Unveiling the intrinsic reaction between silicon-graphite composite anode and ionic liquid electrolyte in lithium-ion battery
    Wu, R.; Liu, X.; Zheng, Y.; Li, Y.; Shi, H.; Cheng, X.; Pfleging, W.; Zhang, Y.
    2020. Journal of power sources, 473, Article: 228481. doi:10.1016/j.jpowsour.2020.228481
  601. THz Detection Techniques Overview
    Mazzocchi, F.; Strauß, D.; Bründermann, E.; Müller, A.-S.; Scherer, T. A.
    2020, September 27. 9th International Beam Instrumentation Conference (IBIC 2020), Online, September 14–18, 2020
  602. Effects of 3D electrode design on high-energy silicon-graphite anode materials
    Zheng, Y.; Smyrek, P.; Seifert, H. J.; Zhang, Y.; Pfleging, W.
    2020, September 23. Materials Science and Engineering Congress (MSE 2020), Online, September 22–25, 2020
  603. Safer Sodium Battery: Thermal and electrochemical studies of Na-ion based batteries
    Ijaz Ul Mohsin; Carlos Ziebert; Magnus Rohde; Hans Jürgen Seifert
    2020, September 22. Materials Science and Engineering Congress (MSE 2020), Online, September 22–25, 2020
  604. How battery calorimetry can enhance the lifetime and safety of Lithium-ion and post-Li cells
    Ziebert, C.; Uhlmann, N.; Mohsin, I. U.; Magnus Rohde; Seifert, H. J.
    2020, September 22. Materials Science and Engineering Congress (MSE 2020), Online, September 22–25, 2020
  605. Recent progress in ultrafast laser structuring of advanced silicon/graphite thick film anodes for Li-ion-cells
    Meyer, A.; Zhu, P.; Seifert, H. J.; Pfleging, W.
    2020, September 22. Materials Science and Engineering Congress (MSE 2020), Online, September 22–25, 2020
  606. Synthesis and Characterization of a Multication Doped Mn Spinel, LiNiCuFeMnO, as 5 V Positive Electrode Material
    Sharma, P.; Das, C.; Indris, S.; Bergfeldt, T.; Mereacre, L.; Knapp, M.; Geckle, U.; Ehrenberg, H.; Darma, M. S. D.
    2020. ACS omega, 5 (36), 22861–22873. doi:10.1021/acsomega.0c02174
  607. Correlation of microstructural and mechanical properties of neutron irradiated EUROFER97 steel
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Möslang, A.
    2020. Journal of nuclear materials, 538, Art.-Nr. 152231. doi:10.1016/j.jnucmat.2020.152231
  608. Impact of silver incorporation at the back contact of Kesterite solar cells on structural and device properties
    Mwakyusa, L. P.; Leist, L.; Rinke, M.; Welle, A.; Paetzold, U. W.; Richards, B. S.; Hetterich, M.
    2020. Thin solid films, 709, Art.-Nr. 138223. doi:10.1016/j.tsf.2020.138223
  609. Towards a 1.5 MW, 140 GHz Gyrotron for the Upgraded ECRH System at W7-X
    W7-X Team; Avramidis, K. A.; Ioannidis, Z. C.; Aiello, G.; Bénin, P.; Chelis, I.; Dinklage, A.; Gantenbein, G.; Illy, S.; Jelonnek, J.; Jin, J.; Laqua, H. P.; Leggieri, A.; Legrand, F.; Marek, A.; Marsen, S.; Pagonakis, I. G.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Wagner, D.; Weggen, J.; Wolf, R. C.
    2020, September. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
  610. Long-term corrosion performance of T91 ferritic/martensitic steel at 400 °C in flowing Pb-Bi eutectic with 2 × 10 mass% dissolved oxygen
    Tsisar, V.; Gavrilov, S.; Schroer, C.; Stergar, E.
    2020. Corrosion science, 174, 108852. doi:10.1016/j.corsci.2020.108852
  611. Towards large area CVD diamond disks for Brewster-angle windows
    Aiello, G.; Schreck, S.; Avramidis, K. A.; Franke, T.; Gantenbein, G.; Jelonnek, J.; Meier, A.; Scherer, T.; Strauss, D.; Thumm, M.; Tran, M. Q.; Wild, C.; Woerner, E.
    2020. Fusion engineering and design, 157, Article no: 111818. doi:10.1016/j.fusengdes.2020.111818
  612. Small-angle neutron scattering (SANS) characterization of 13.5 Cr oxide dispersion strengthened ferritic steel for fusion applications
    Coppola, R.; Klimenkov, M.; Lindau, R.; Mangiapia, G.
    2020. Nuclear materials and energy, 24, Art. Nr.: 100778. doi:10.1016/j.nme.2020.100778
  613. Effect of HIP at 800 and 900 °C on microstructure and properties of extruded Be-Ti composites
    Gaisin, R.; Chakin, V.; Duerrschnabel, M.; Rolli, R.; Weingärtner, T.; Goraieb, A.; Vladimirov, P.
    2020. Nuclear materials and energy, 24, 100771. doi:10.1016/j.nme.2020.100771
  614. Preparation, analysis, and application of coated glass targets for the Wendelstein 7-X laser blow-off system
    W7-X Team; Wegner, T.; Geiger, B.; Foest, R.; Jansen van Vuuren, A.; Winters, V. R.; Biedermann, C.; Burhenn, R.; Buttenschön, B.; Cseh, G.; Joda, I.; Kocsis, G.; Kunkel, F.; Quade, A.; Schäfer, J.; Schmitz, O.; Szepesi, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Review of scientific instruments, 91 (8), 083503. doi:10.1063/1.5144943
  615. Plasma filaments in the scrape-off layer of Wendelstein 7-X
    W7-X Team; Killer, C.; Shanahan, B.; Grulke, O.; Endler, M.; Hammond, K.; Rudischhauser, L.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Losert, M.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Plasma physics and controlled fusion, 62 (8), 085003. doi:10.1088/1361-6587/ab9313
  616. Large wetted areas of divertor power loads at Wendelstein 7-X
    W7-X Team; Niemann, H.; Drewelow, P.; Jakubowski, M. W.; Puig Sitjes, A.; Cannas, B.; Gao, Y.; Pisano, F.; König, R.; Burhenn, R.; Hacker, P.; Reimold, F.; Zhang, D.; Brunner, K. J.; Knauer, J.; Sunn Pedersen, T.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.; Reimold, F.; Zhang, D.; Brunner, K. J.; Knauer, J.; Sunn Pedersen, T.
    2020. Nuclear fusion, 60 (8), 084003. doi:10.1088/1741-4326/ab937a
  617. Safer Sodium Battery: Thermal and electrochemical studies of Na-ion based cells
    Mohsin, I. U.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2020, July 28. International Battery Seminar and Exhibit (2020), Online, July 28–30, 2020
  618. Battery Calorimetry for Progress in Thermal Management and Safety of Cells and Packs
    Ziebert, C.; Uhlmann, N.; Seifert, H. J.
    2020, July 28. International Battery Seminar and Exhibit (2020), Online, July 28–30, 2020
  619. Ultrafast Laser Materials Processing of Electrodes for Next Generation Li-Ion Batteries (NextGen-3DBat)
    Meyer, A.; Zhu, P.; Seifert, H. J.; Pfleging, W.
    2020, July 28. International Battery Seminar and Exhibit (2020), Online, July 28–30, 2020
  620. Materials for Fusion energy technology – Improvement of thermal stability of cold-rolled tungsten sheets by potassium-doping
    Lied, P.
    2020, July 22. Wall Forum (2020), Online, July 22, 2020
  621. EU DEMO EC equatorial launcher pre-conceptual performance studies
    Garavaglia, S.; Baiocchi, B.; Bruschi, A.; Čufar, A.; Fanale, F.; Granucci, G.; Moro, A.; Poli, E.; Rispoli, N.; Scherer, T.; Siccinio, M.; Späh, P.; Strauß, D.; Tigelis, I.; Tsironis, C.; Franke, T.; Tran, M. Q.
    2020. Fusion engineering and design, 156, Art.-Nr.: 111594. doi:10.1016/j.fusengdes.2020.111594
  622. Users′ perspective on D-Li neutron sources (A-FNS and IFMIF-DONES) for DEMO and beyond
    Muroga, T.; Möslang, A.; Diegele, E.
    2020. Journal of nuclear materials, 535, Art.-Nr.: 152186. doi:10.1016/j.jnucmat.2020.152186
  623. Design and characteristics of a low-frequency magnetic probe for magnetic profile measurements at Wendelstein 7-X
    W7-X Team; Knieps, A.; Liang, Y.; Drews, P.; Endler, M.; Grulke, O.; Huang, Z.; Killer, C.; Liu, S.; Nicolai, D.; Rahbarnia, K.; Sandri, N.; Satheeswaran, G.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Losert, M.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Review of scientific instruments, 91 (7), 073506. doi:10.1063/5.0002193
  624. Analysis of Options and Experimental Examination of Fuels for Water Cooled Reactors with Increased Accident Tolerance (ACTOF)
    Cherubini, M.; Pastore, G.; Penttilä, S.; Ševeček, M.; Stuckert, J.; Veshchunov, M.; Xu, P.; Zozulia, I.
    2020. International Atomic Energy Agency
  625. Numerical modeling of the electron temperature crashes observed in Wendelstein 7-X stellarator experiments
    W7-X Team; Yu, Q.; Strumberger, E.; Igochine, V.; Lackner, K.; Laqua, H. P.; Zanini, M.; Braune, H.; Hirsch, M.; Höfel, U.; Marsen, S.; Stange, T.; Wolf, R. C.; Günter, S.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Nuclear fusion, 60 (7), 076024. doi:10.1088/1741-4326/ab9258
  626. Oxidation behavior and microstructure evolution of alumina-forming austenitic & high entropy alloys in steam environment at 1200 °C
    Shi, H.; Tang, C.; Jianu, A.; Fetzer, R.; Weisenburger, A.; Steinbrueck, M.; Grosse, M.; Stieglitz, R.; Müller, G.
    2020. Corrosion science, 170, Article: 108654. doi:10.1016/j.corsci.2020.108654
  627. Microstructural evolution of three potential fusion candidate steels under ion-irradiation
    Zimber, N.; Vladimirov, P.; Klimenkov, M.; Jäntsch, U.; Vila, R.; Chakin, V.; Mota, F.
    2020. Journal of nuclear materials, 535, Article No.152160. doi:10.1016/j.jnucmat.2020.152160
  628. A Review on Temperature-Dependent Electrochemical Properties, Aging, and Performance of Lithium-Ion Cells
    Alipour, M.; Ziebert, C.; Conte, F. V.; Kizilel, R.
    2020. Batteries, 6 (3), 35. doi:10.3390/batteries6030035
  629. High quality epitaxial MnAu (001) thin films grown by molecular beam epitaxy
    Bommanaboyena, S. P.; Bergfeldt, T.; Heller, R.; Kläui, M.; Jourdan, M.
    2020. Journal of applied physics, 127 (24), Art.-Nr.: 243901. doi:10.1063/5.0009566
  630. Metadata Framework for Assisting Experimental Planning and Evaluation at Wendelstein 7-X
    W7-X Team; Spring, A.; Grahl, M.; Lewerentz, M.; Klug, C.; Dumke, S.; Bluhm, T.; Laqua, H.; Grun, M.; Holtz, A.; Riemann, H.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. IEEE transactions on plasma science, 48 (6), 1409–1414. doi:10.1109/TPS.2019.2958034
  631. Lessons Learned From the Final Design Process of the ITER EC Upper Launcher Structural System
    Spaeh, P.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.
    2020. IEEE transactions on plasma science, 48 (6), 1549–1554. doi:10.1109/TPS.2020.2968623
  632. The Langmuir probe system in the Wendelstein 7-X test divertor
    W7-X Team; Rudischhauser, L.; Endler, M.; Höfel, U.; Hammond, K. C.; Kallmeyer, J. P.; Blackwell, B. D.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Review of scientific instruments, 91 (6), 063505. doi:10.1063/1.5143013
  633. Modelling of Fuel Behaviour in Design Basis Accidents and Design Extension Conditions : Proceedings of a Technical Meeting
    Veshchunov, M.; Bouloré, A.; Liu, T.; Ševeček, M.; Stuckert, J.; Zhang, J.
    2020. International Atomic Energy Agency
  634. Enabling high rate capability, low internal resistance, and excellent cyclability for vanadium redox flow batteries utilizing ultrafast laser-structured graphite felt
    Daugherty, M. C.; Hsieh, C.-T.; Aaron, D. S.; Ashraf Gandomi, Y.; Li, J.; Zheng, Y.; Pfleging, W.
    2020. Electrochimica acta, 344, 136171. doi:10.1016/j.electacta.2020.136171
  635. Microstructural characterization of inhomogeneity in 9Cr ODS EUROFER steel
    Das, A.; Chekhonin, P.; Altstadt, E.; Bergner, F.; Heintze, C.; Lindau, R.
    2020. Journal of nuclear materials, 533, Art.-Nr.: 152083. doi:10.1016/j.jnucmat.2020.152083
  636. Charge-state independent anomalous transport for a wide range of different impurity species observed at Wendelstein 7-X
    W7-X Team; Langenberg, A.; Wegner, T.; Pablant, N. A.; Marchuk, O.; Geiger, B.; Tamura, N.; Bussiahn, R.; Kubkowska, M.; Mollén, A.; Traverso, P.; Smith, H. M.; Fuchert, G.; Bozhenkov, S.; Damm, H.; Pasch, E.; Brunner, K.-J.; Knauer, J.; Beurskens, M.; Burhenn, R.; Wolf, R. C.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Physics of plasmas, 27 (5), 052510. doi:10.1063/5.0004462
  637. Enhanced energy confinement after series of pellets in Wendelstein 7-X
    W7-X Team; Baldzuhn, J.; Damm, H.; Beidler, C. D.; McCarthy, K.; Panadero, N.; Biedermann, C.; Bozhenkov, S. A.; Dinklage, A.; Brunner, K. J.; Fuchert, G.; Kazakov, Y.; Beurskens, M.; Dibon, M.; Geiger, J.; Grulke, O.; Höfel, U.; Klinger, T.; Köchl, F.; Knauer, J.; Kocsis, G.; Kornejew, P.; Lang, P. T.; Langenberg, A.; Laqua, H.; Pablant, N. A.; Pasch, E.; Pedersen, T. S.; Ploeckl, B.; Rahbarnia, K.; Schlisio, G.; Scott, E. R.; Stange, T.; Von Stechow, A.; Szepesi, T.; Turkin, Y.; Wagner, F.; Winters, V.; Wurden, G.; Zhang, D.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Plasma physics and controlled fusion, 62 (5), 055012. doi:10.1088/1361-6587/ab8112
  638. Thermodynamisch-kinetische Untersuchungen im Al–Cr–Fe System für ODS-Stahl-Analysen. PhD dissertation
    Rank, M.
    2020, April 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000118001
  639. Wisconsin In Situ Penning (WISP) gauge: A versatile neutral pressure gauge to measure partial pressures in strong magnetic fields
    W7-X Team; Kremeyer, T.; Flesch, K.; Schmitz, O.; Schlisio, G.; Wenzel, U.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Review of scientific instruments, 91 (4), 043504. doi:10.1063/1.5125863
  640. Effect of process parameters on surface texture generated by laser polishing of additively manufactured Ti-6Al-4V
    Santos Solheid, J. dos; Elkaseer, A.; Wunsch, T.; Charles, A. P.; Seifert, H. J.; Pfleging, W.
    2020. Laser-based Micro- and Nanoprocessing XIV. Ed.: U. Klotzbach, 24 S., Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2545623
  641. International cooperation between Brazil and Germany in Materials Science: Editorial
    Pfleging, W.; Bock, E.
    2020. The Academic Society Journal (TASJ), 4 (1), 1–2. doi:10.32640/tasj.2020.1.1
  642. Interfacial Superassembly of Grape-Like MnO–Ni@C Frameworks for Superior Lithium Storage
    Hou, C.; Wang, J.; Zhang, W.; Li, J.; Zhang, R.; Zhou, J.; Fan, Y.; Li, D.; Dang, F.; Liu, J.; Li, Y.; Liang, K.; Kong, B.
    2020. ACS applied materials & interfaces, 12 (12), 13770–13780. doi:10.1021/acsami.9b20317
  643. Tungsten modified by potassium doping and rhenium addition for fusion reactor applications
    Nogami, S.; Hasegawa, A.; Fukuda, M.; Watanabe, S.; Reiser, J.; Rieth, M.
    2020. Fusion engineering and design, 152, Art.-Nr. 111445. doi:10.1016/j.fusengdes.2019.111445
  644. Thermal wave interferometry measurements and microstructural analysis of twin wire arc spray cylinder coatings for passenger car engines
    Arbogast, J.; Schaller, R.; Lindemann, S.; Schilder, B.; Rohde, M.; Seifert, H. J.
    2020. Infrared physics & technology, 105, 103216. doi:10.1016/j.infrared.2020.103216
  645. Thermophysical Properties of Lithium Aluminum Germanium Phosphate with Different Compositions
    Rohde, M.; Cui, Y.; Ziebert, C.; Seifert, H. J.
    2020. International journal of thermophysics, 41 (3), Art. Nr.: 31. doi:10.1007/s10765-020-2607-0
  646. Elucidating the dual role of grain boundaries as dislocation sources and obstacles and its impact on toughness and brittle-to-ductile transition
    Reiser, J.; Hartmaier, A.
    2020. Scientific reports, 10 (1), Art.-Nr.: 2739. doi:10.1038/s41598-020-59405-5
  647. Investigation of the influence of 3D electrode architectures on lithium distribution in anode materials by laser-induced breakdown spectroscopy
    Zheng, Y.; Pfäffl, L.; Smyrek, P.; Seifert, H. J.; Pfleging, W.
    2020, February 6. 14th Laser-based Micro- and Nanoprocessing (2020), San Francisco, CA, USA, February 3–6, 2020
  648. Laser-induced breakdown spectroscopy : A versatile tool for quality-controlled development of Li-based battery systems
    Smyrek, P.; Zheng, Y.; Seifert, H. J.; Pfleging, W.
    2020, February 5. 14th Laser-based Micro- and Nanoprocessing (2020), San Francisco, CA, USA, February 3–6, 2020
  649. Laser Processing of Battery Materials - Process Up-Scaling and Strategies for Tuning of Materials Properties
    Pfleging, W.; Smyrek, P.; Zhu, P.; Cheng, X.; Zhang, Y.; Zheng, Y.
    2020, February 5. 14th Laser-based Micro- and Nanoprocessing (2020), San Francisco, CA, USA, February 3–6, 2020
  650. Cell Engineering – How Battery Calorimetry Can Aid Battery Research
    Ziebert, C.; Uhlmann, N.; Rohde, M.; Seifert, H. J.
    2020, January 27. 10th Advanced Automotive Battery Conference (AABC 2020), Wiesbaden, Germany, January 12–18, 2020
  651. Effect of Different Cr and Ni Additions on Oxidation Behavior of Co-Re-Based Alloys
    Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
    2020. JOM, 72 (1), 393–402. doi:10.1007/s11837-019-03868-z
  652. Design verification of the gyrotron diamond output window for the upgrade of the ECRH system at W7-X
    Aiello, G.; Avramidis, K. A.; Gantenbein, G.; Jelonnek, J.; Jin, J.; Laqua, H. P.; Meier, A.; Scherer, T.; Strauss, D.; Thumm, M.
    2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
  653. Results of the QUENCH-18 Bundle Experiment on Air Ingress and AgInCd absorber behavior
    Stuckert, J.; Kalilainen, J.; Lind, T.; Stegmaier, U.; Steinbrück, M.; Zhang, Y.
    2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000131350
  654. Two-Stage Settling Approach to Purify Mg Alloy
    Liu, J.; Chen, T.; Yuan, Y.; Wu, J.; Yang, L.; Tang, A.; Li, D.; Pan, F.
    2020. Magnesium Technology 2020. Ed.: J.B. Jordon, 55–59, Springer International Publishing. doi:10.1007/978-3-030-36647-6_11
  655. Linear, resistive stability studies for Wendelstein 7-X-type equilibria with external current drive
    W7-X Team; Strumberger, E.; Günter, S.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Nuclear fusion, 60 (10), Article no: 106013. doi:10.1088/1741-4326/aba9ea
  656. Towards a Greener and Scalable Synthesis of NaTiO Nanorods and Their Application as Anodes in Batteries for Grid-Level Energy Storage
    De Carolis, D. M.; Vrankovic, D.; Kiefer, S. A.; Bruder, E.; Dürrschnabel, M. T.; Molina-Luna, L.; Graczyk-Zajac, M.; Riedel, R.
    2020. Energy technology, 9, Art.-Nr.: 2000856. doi:10.1002/ente.202000856
  657. Terahertz Detection Techniques Overview
    Mazzocchi, F.
    2020. 9th International Beam Instrumentation Conference (IBIC 2020), Online, September 14–18, 2020
  658. High-Temperature Oxidation of Chrome-Nickel Alloy
    Chalupová, A.; Steinbrück, M.; Grosse, M.; Krejčí, J.; Ševeček, M.
    2020. Acta polytechnica, 28, 8–14. doi:10.14311/APP.2020.28.0008
  659. Control Rod Behavior During Beyond Design-Basis Accidents in LWRs
    Steinbrück, M.; Barrachin, M.
    2020. Comprehensive Nuclear Materials. Vol.: 2., 466–498, Elsevier. doi:10.1016/B978-0-12-803581-8.11602-9
  660. High-Temperature Oxidation of Zirconium Alloys in Various Atmospheres
    Steinbrück, M.
    2020. Reference Module in Materials Science and Materials Engineering, Elsevier. doi:10.1016/B978-0-12-819726-4.00006-5
  661. Metallic and Ceramic Coatings for Enhanced Accident Tolerant Fuel Cladding
    Tang, C.; Stüber, M.; Seifert, H. J.; Steinbrück, M.
    2020. Comprehensive Nuclear Materials. Ed.: R.J.M. Konings. Vol. 4, 490–514, Elsevier. doi:10.1016/b978-0-12-803581-8.11625-x
  662. Recent Progress in Laser Texturing of Battery Materials: A Review of Tuning Electrochemical Performances, Related Material Development, and Prospects for Large-Scale Manufacturing
    Pfleging, W.
    2020. International journal of extreme manufacturing, 3, Art.Nr.012002 (20pp). doi:10.1088/2631-7990/abca84
  663. Lithium-Ion Battery—3D Micro-/Nano-Structuring, Modification and Characterization
    Pfleging, W.; Gotcu, P.; Smyrek, P.; Zheng, Y.; Lee, J. K.; Seifert, H. J.
    2020. Laser Micro-Nano-Manufacturing and 3D Microprinting. Ed.: A. Hu, 313–347, Springer International Publishing. doi:10.1007/978-3-030-59313-1_11
  664. Spinel to Rock-Salt Transformation in High Entropy Oxides with Li Incorporation
    Wang, J.; Stenzel, D.; Azmi, R.; Najib, S.; Wang, K.; Jeong, J.; Sarkar, A.; Wang, Q.; Sukkurji, P. A.; Bergfeldt, T.; Botros, M.; Maibach, J.; Hahn, H.; Brezesinski, T.; Breitung, B.
    2020. Electrochem, 1 (1), 60–74. doi:10.3390/electrochem1010007
  665. THz detection techniques overview
    Mazzocchi, F.; Strauß, D.; Scherer, T.; Müller, A. S.; Bründermann, E.
    2020. 9th International Beam Instrumentation Conference (Remote) (IBIC 2020). doi:10.18429/JACoW-IBIC2020-WEAO02
  666. Heat Generation in NMC622 Coin Cells during Electrochemical Cycling: Separation of Reversible and Irreversible Heat Effects
    Zhao, W.; Rohde, M.; Mohsin, I. U.; Ziebert, C.; Seifert, H. J.
    2020. Batteries, 6 (4), Article: 55. doi:10.3390/batteries6040055
  667. Post-irradiation evaluation of eurofer97 fracture toughness using miniature multinotch bend bar specimens
    Chen, X.; Clowers, L. N.; Graening, T.; Bhattacharya, A.; Campbell, A. A.; Robertson, J.; Geringer, J. W.; Sokolov, M. A.; Katoh, Y.; Rieth, M.
    2020. ASME 2020 Pressure Vessels and Piping Conference, PVP 2020, 3 August 2020, online, Art.-Nr. v001t01a059, The American Society of Mechanical Engineers (ASME). doi:10.1115/PVP2020-21312
  668. Post-irradiation evaluation of Al-based coatings after irradiation in the LVR-15 fission reactor
    Kunzová, K.; Rozsypalová, A.; Kekrt, J.; Kordač, M.; Di Fonzo, F.; Schroer, C.; Utili, M.; Vála, L.
    2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
  669. Development of anti-permeation and corrosion barriers for WCLL Breeding Blanket
    Utili, M.; Bassini, S.; Cataldo, S.; Di Fonzo, F.; Kordač, M.; Hernández, T.; Lorenz, J.; Martelli, D.; Paladino, B.; Moroño, A.; Schroer, C.; Spagnuolo, G. A.; Tarantino, M.; Vála, L.; Vanazzi, M.
    2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
  670. Detection of hydrogen as impurity in liquid lithium: electrochemical hydrogen-sensor for IFMIF-DONES
    Holstein, N.; Krauss, W.; Nitti, F. S.
    2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
  671. Impact of the temperature ratio on turbulent impurity transport in Wendelstein 7-X
    W7-X Team; Wegner, T.; Alcuson, J. A.; Geiger, B.; Stechow, A. von; Xanthopoulos, P.; Angioni, C.; Beurskens, M. N. A.; Böttger, L.; Bozhenkov, S. A.; Brunner, K. J.; Burhenn, R.; Buttenschön, B.; Damm, H.; Edlund, E. M.; Ford, O. P.; Fuchert, G.; Grulke, O.; Huang, Z.; Knauer, J. P.; Kunkel, F.; Langenberg, A.; Pablant, N. A.; Pasch, E.; Rahbarnia, K.; Schilling, J.; Thomsen, H.; Vano, L.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Nuclear fusion, 60 (12). doi:10.1088/1741-4326/abb869
  672. Megawatt power generation of the dual-frequency gyrotron for TCV at 84 and 126 GHz, in long pulses
    Hogge, J.-P.; Alberti, S.; Avramidis, K. A.; Bruschi, A.; Bin, W.; Cau, F.; Cismondi, F.; Dubray, J.; Fasel, D.; Gantenbein, G.; Garavaglia, S.; Genoud, J.; Goodman, T. P.; Illy, S.; Jin, J.; Legrand, F.; Marchesin, R.; Marlétaz, B.; Masur, J.; Moro, A.; Moura, C.; Pagonakis, I. G.; Périal, E.; Savoldi, L.; Scherer, T.; Siravo, U.; Thumm, M.; Toussaint, M.; Tran, M.-Q.
    2020. 23rd Topical Conference on Radiofrequency Power in Plasmas, 090006, AIP Publishing. doi:10.1063/5.0014343
  673. Thermodynamic/electrochemical description of high-voltage spinels for lithium-ion batteries
    Li, D.; Zhang, W.; Chang, K.; Yuan, Y.; Seifert, H. J.
    2020. Journal of the Electrochemical Society, 167 (13), Art.-Nr.: 130511. doi:10.1149/1945-7111/abb7ec
  674. Two-Step Laser Post-Processing for the Surface Functionalization of Additively Manufactured Ti-6Al-4V Parts
    Solheid, J. S.; Wunsch, T.; Trouillet, V.; Weigel, S.; Scharnweber, T.; Seifert, H. J.; Pfleging, W.
    2020. Materials, 13 (21), Art.-Nr.: 4872. doi:10.3390/ma13214872
  675. Ultrasonic treatment of ultrafine-grained titanium
    Murzaev, R. T.; Bachurin, D. V.; Mukhametgalina, A. A.; Murzinova, M. A.; Nazarov, A. A.
    2020. Physics letters / A, 384 (35), Art.-Nr.: 126906. doi:10.1016/j.physleta.2020.126906
  676. Experimental and theoretical investigation of the chemical exfoliation of Cr-based MAX phase particles
    Tran, M. H.; Malik, A. M.; Dürrschnabel, M.; Regoutz, A.; Thakur, P.; Lee, T.-L.; Perera, D.; Molina-Luna, L.; Albe, K.; Rohrer, J.; Birkel, C. S.
    2020. Dalton transactions, 49 (35), 12215–12221. doi:10.1039/d0dt01448f
  677. A modified ‘skeleton/skin’ strategy for designing CoNiP nanosheets arrayed on graphene foam for on/off switching of NaBH hydrolysis
    Li, J.; Hong, X.; Wang, Y.; Luo, Y.; Li, B.; Huang, P.; Zou, Y.; Chu, H.; Zheng, S.; Sun, L.; Xu, F.; Du, Y.; Wang, J.; Rosei, F.; Seifert, H. J.; Sven, U.; Wu, X.
    2020. RSC Advances, 10 (45), 26834–26842. doi:10.1039/d0ra01892a
  678. Advances in additive manufacturing of fusion materials
    Neuberger, H.; Hernández, F. A.; Rieth, M.; Bonk, S.; Stratil, L.; Müller, O.; Volker, K.-U.
    2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
  679. Energy exchange in M-crowdion clusters in 2D Morse lattice
    Shepelev, I. A.; Bachurin, D. V.; Korznikova, E. A.; Dmitriev, S. V.
    2020. The European physical journal / B, 93 (9), Art. Nr.: 167. doi:10.1140/epjb/e2020-10160-0
  680. Microstructure and fracture toughness characterization of three 9Cr ODS EUROFER steels with different thermo-mechanical treatments
    Das, A.; Chekhonin, P.; Altstadt, E.; McClintock, D.; Bergner, F.; Heintze, C.; Lindau, R.
    2020. Journal of nuclear materials, 542, Art. Nr.: 152464. doi:10.1016/j.jnucmat.2020.152464
  681. Long-term corrosion performance of T91 ferritic/martensitic steel at 400 °C in flowing Pb-Bi eutectic with 2 × 10 mass% dissolved
    Tsisar, V.; Gavrilov, S.; Schroer, C.; Stergar, E.
    2020. Annual Congress of the European Federation of Corrosion (EUROCORR 2020), Online, September 7–11, 2020
  682. Tritium release and retention in beryllium and titanium beryllide after neutron irradiation up to damage doses of 23-38 dpa
    Chakin, V.; Rolli, R.; Gaisin, R.; Hoeppener-Kramar, U.; Nakamichi, M.; Zmitko, M.
    2020. Fusion engineering and design, 161, Art.-Nr.: 111938. doi:10.1016/j.fusengdes.2020.111938
  683. Industrial-scale manufacturing experience of titanium beryllide block for DEMO blanket application
    Gaisin, R.; Chakin, V.; Vladimirov, P.; Hernández, F. A.; Udartsev, S.; Vechkutov, A.; Kolmakov, M.
    2020. Fusion engineering and design, 161, Art.-Nr.: 111862. doi:10.1016/j.fusengdes.2020.111862
  684. Oxidation kinetics of Cr-coated zirconium alloy: Effect of coating thickness and microstructure
    Kashkarov, E. B.; Sidelev, D. V.; Syrtanov, M. S.; Tang, C.; Steinbrück, M.
    2020. Corrosion science, 175, 108883. doi:10.1016/j.corsci.2020.108883
  685. The role of two-stage phase formation for the solid-state runaway reaction in Al/Ni reactive multilayers
    Neuhauser, T.; Tinti, G.; Leiste, H.; Casati, N.; Ulrich, S.; Stüber, M.; Woll, K.
    2020. Applied physics letters, 117 (1), Art. Nr.: 011902. doi:10.1063/5.0011338
  686. Microstructural Investigations of Novel High Temperature Alloys Based on NiAl-(Cr,Mo)
    Gombola, C.; Kauffmann, A.; Geramifard, G.; Blankenburg, M.; Heilmaier, M.
    2020. Metals, 10 (7), Art. Nr.: 961. doi:10.3390/met10070961
  687. Analysis of the reaction runaway in Al/Ni multilayers with combined nanocalorimetry and time-resolved X-ray diffraction
    Neuhauser, T.; Tinti, G.; Leiste, H.; Casati, N.; Stüber, M.; Woll, K.
    2020. Acta materialia, 195, 579–587. doi:10.1016/j.actamat.2020.05.035
  688. Study of (Ti,Zr)C:H/a-C:H nanocomposite thin film formation by low temperature reactive high power impulse magnetron sputtering
    Poltorak, C.; Stüber, M.; Leiste, H.; Bergmaier, A.; Ulrich, S.
    2020. Surface and coatings technology, 398, Article: 125958. doi:10.1016/j.surfcoat.2020.125958
  689. Inspection of W 7-X plasma-facing components after the operation phase OP1.2b: observations and first assessments
    W7-X Team; Dhard, C. P.; Äkäslompolo, S.; Balden, M.; Baldzuhn, J.; Biedermann, C.; Bräuer, T.; Brezinsek, S.; Endler, M.; Hayashi, Y.; Hwangbo, D.; Kajita, S.; Krause, M.; Kornejew, P.; Masuzaki, S.; Mayer, M.; Motojima, G.; Naujoks, D.; Otte, M.; Rohde, V.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Physica scripta, 2020 (T171), 014033. doi:10.1088/1402-4896/ab4b3f
  690. Impurity sources and fluxes in W7-X: from the plasma-facing components to the edge layer
    W7-X Team; Wang, E.; Brezinsek, S.; Sereda, S.; Buttenschön, B.; Barbui, T.; Dhard, C. P.; Endler, M.; Ford, O.; Flom, E.; Hammond, K. C.; Jakubowski, M.; Krychowiak, M.; Kornejew, P.; König, R.; Liang, Y.; Mayer, M.; Naujoks, D.; Neubauer, O.; Oelmann, J.; Rasinski, M.; Winters, V. R.; Goriaev, A.; Wauters, T.; Wei, Y.; Zhang, D.; Baumann, K.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2020. Physica scripta, 2020 (T171), 014040. doi:10.1088/1402-4896/ab4c04
  691. Effect of laser structured micro patterns on the polyvinyl butyral/oxide/steel interface stability
    Hagen, C. H. M.; Knudsen, O. Ø.; Zavieh, A. H.; Pfleging, W.
    2020. Progress in organic coatings, 147, Article: 105766. doi:10.1016/j.porgcoat.2020.105766
  692. New insights into microstructure of irradiated beryllium based on experiments and computer simulations
    Klimenkov, M.; Vladimirov, P.; Jäntsch, U.; Kuksenko, V.; Rolli, R.; Möslang, A.; Zimber, N.
    2020. Scientific reports, 10 (1), Article: 8042. doi:10.1038/s41598-020-64654-5
  693. The brittle-to-ductile transition in cold-rolled tungsten sheets: the rate-limiting mechanism of plasticity controlling the BDT in ultrafine-grained tungsten
    Bonnekoh, C.; Reiser, J.; Hartmaier, A.; Bonk, S.; Hoffmann, A.; Rieth, M.
    2020. Journal of materials science, 55, 12314–12337. doi:10.1007/s10853-020-04801-5
  694. Cooling rates of pyroclastic deposits inferred from mineral magnetic investigations: a case study from the Pleistocene Mýtina Maar (Czech Republic)
    Lied, P.; Kontny, A.; Nowaczyk, N.; Mrlina, J.; Kämpf, H.
    2020. International journal of earth sciences, 109, 1707–1725. doi:10.1007/s00531-020-01865-1
  695. Investigation of the 3D hydrogen distribution in zirconium alloys by means of neutron tomography – Paper presented at the Symposium “Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons” of the MSE 2018, 26–28 September 2018, Darmstadt, Germany
    Grosse, M.; Schillinger, B.; Trtik, P.; Kardjilov, N.; Steinbrück, M.
    2020. International journal of materials research, 111 (1), 40–46. doi:10.3139/146.111863
  696. Results of the QUENCH-LOCA experimental program at KIT
    Stuckert, J.; Grosse, M.; Steinbrueck, M.; Walter, M.; Wensauer, A.
    2020. Journal of nuclear materials, 534, Article: 152143. doi:10.1016/j.jnucmat.2020.152143
  697. Elemental analysis of commercial zirconia dental implants - Is “metal-free” devoid of metals?
    Gross, C.; Bergfeldt, T.; Fretwurst, T.; Rothweiler, R.; Nelson, K.; Stricker, A.
    2020. Journal of the mechanical behavior of biomedical materials, 107, Art.-Nr. 103759. doi:10.1016/j.jmbbm.2020.103759
  698. Research Progress on Compatibility of Liquid Metal and Iron-based Alloy in Lead Cooled Energy Systems
    Chen, L.; Zhou, Z.; Schroer, C.
    2020. Cailiao Daobao/Materials Reports, 34 (5), 5096–5101. doi:10.11896/cldb.19010064
  699. Round robin exercise of the candidate ATF cladding materials within the IAEA ACTOF project
    Ševeček, M.; Krejčí, J.; Chalupová, A.; Kabátová, J.; Manoch, F.; Kočí, J.; Cvrček, L.; Tang, C.; Steinbrűck, M.; Grosse, M.; Penttilä, S.; Autio, J.-M.; Lydman, J.; Toivonen, A.; Sartowska, B.; Starosta, W.; Waliś, L.; Hózer, Z.; Novotny, T.; Perezné-Feró, E.; Csordás, A. P.; Horváth, M.; Szabó, P.; Giovedi, C.; Xu, P.
    2020. International Nuclear Fuel Cycle Conference, GLOBAL 2019: Seattle, WA, USA, 22–27 September 2019, 283–290, ANS
  700. Oxidation and quench behavior of cold spraying Cr-coated zircaloy fuel cladding under severe accident scenarios
    Tang, C.; Grosse, M.; Steinbrueck, M.; Shirvan, K.
    2020. International Nuclear Fuel Cycle Conference, GLOBAL 2019: Seattle, WA, USA, 22–27 September 2019, 855–863, ANS
  701. Investigation of corrosion and high temperature oxidation of promising ATF cladding materials in the framework of the Il trovatore project
    Grosse, M. M.; Loo, K. van; Frankberg, E. L.; Tang, C.; Lambrinou, K.; Di Fonzo, F.; Steinbrück, M.
    2020. International Nuclear Fuel Cycle Conference, GLOBAL 2019: Seattle, WA, USA, 22–27 September 2019, 274–279, American Nuclear Society (ANS)
  702. Synthesis of Anatase (Core)/Rutile (Shell) Nanostructured TiO2 Thin Films by Magnetron Sputtering Methods for Dye-Sensitized Solar Cell Applications
    Panepinto, A.; Michiels, M.; Dürrschnabel, M. T.; Molina-Luna, L.; Bittencourt, C.; Cormier, P.-A.; Snyders, R.
    2020. ACS applied energy materials, 3 (1), 759–767. doi:10.1021/acsaem.9b01910
  703. Investigation of microstructure and liquid lead corrosion behavior of a Fe-18Ni-16Cr-4Al base alumina-forming austenitic stainless steel
    Chen, L.; Wang, M.; Tsisar, V.; Schroer, C.; Zhou, Z.
    2020. Materials Research Express, 7 (2), Article No.026533. doi:10.1088/2053-1591/ab71d1
  704. Linking tracks in mica crystals with phase transitions in a bistable lattice
    Krylova, K. A.; Korznikova, E. A.; Semenov, A. S.; Bachurin, D. V.; Dmitriev, S. V.
    2020. The European physical journal / B, 93 (2), Article No.23. doi:10.1140/epjb/e2020-100565-0
  705. Textured growth of polycrystalline MAX phase carbide coatings via thermal annealing of M/C/Al multilayers
    Tang, C.; Steinbrück, M.; Klimenkov, M.; Jäntsch, U.; Seifert, H. J.; Ulrich, S.; Stüber, M.
    2020. Journal of vacuum science & technology / A, 38 (1), Article No.013401. doi:10.1116/1.5131544
  706. Thermodynamik von Kobaltoxid-Anodenmaterialien für Lithium-Ionen-Batterien und ihr Elektrochemisches Verhalten. PhD dissertation
    Mayer, N. A.
    2020. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000105134
  707. Zr alloy protection against high-temperature oxidation: Coating by a double-layered structure with active and passive functional properties
    Kratochvílová, I.; Ashcheulov, P.; Škarohlíd, J.; Škoda, R.; Kopeček, J.; Sajdl, P.; Macák, J.; Lajčinová, M.; Nováková, A.; Neethling, J.; Vuuren, A. J. van; Ngongo, S.; Xu, P.; Lorinčík, J.; Steinbrück, M.
    2020. Corrosion science, 163, Article: 108270. doi:10.1016/j.corsci.2019.108270
  708. Non-contact high-frequency measurements of mechanically loaded ferromagnetic thin films: An alternative approach for torque sensors
    Beirle, S.; Seemann, K.
    2020. Sensors and actuators <Lausanne> / A, 301, Article: 111788. doi:10.1016/j.sna.2019.111788
  709. Laser polishing of additively manufactured Ti-6Al-4V - Microstructure evolution and material properties
    Solheid, J.; Mohanty, S.; Bayat, M.; Wunsch, T.; Weidler, P. G.; Seifert, H. J.; Pfleging, W.
    2020. Journal of laser applications, 32, 022019. doi:10.2351/7.0000065
  710. Synthesis of Be₁₂Ti compound via arc melting or hot isostatic pressing
    Gaisin, R.; Chakin, V.; Rolli, R.; Hoffmann, J.; Leiste, H.; Bergfeldt, T.; Jäntsch, U.; Klimenkov, M.; Lorenz, J.; Goraieb, A.; Vladimirov, P.; Möslang, A.
    2020. Journal of alloys and compounds, 818, Article No.152919. doi:10.1016/j.jallcom.2019.152919
  711. Exploring fusion-reactor physics with high-power electron cyclotron resonance heating on ASDEX Upgrade
    Stober, J.; Reisner, M.; Angioni, C.; Banon Navarro, A.; Bobkov, V. V.; Bock, A.; Denisov, G. G.; Fable, E.; Fischer, R.; Gantenbein, G.; Gil, L.; Görler, T.; Igochine, V.; Kasparek, W.; Leuterer, F.; Litvak, A. G.; McDermott, R. M.; Meier, A.; Monaco, F.; Münich, M.; Plaum, B.; Plank, U.; Poli, E.; Popov, L.; Pütterich, T.; Scherer, T.; Schubert, M.; Suttrop, W.; Tai, E.; Thumm, M.; Wagner, D.; Zohm, H.
    2020. Plasma physics and controlled fusion, 62 (2), Art. Nr.: 024012. doi:10.1088/1361-6587/ab512b
  712. Bio-inspired interfaces for easy-to-recycle lithium-ion batteries
    Jin, C.; Yang, Z.; Li, J.; Zheng, Y.; Pfleging, W.; Tang, T.
    2020. Extreme mechanics letters, 34, Article no: 100594. doi:10.1016/j.eml.2019.100594
  713. Field experiments evaluating a biomimetic shark-inspired (BioS) subsoiler for tillage resistance reduction
    Wang, Y.; Li, N.; Ma, Y.; Tong, J.; Pfleging, W.; Sun, J.
    2020. Soil & tillage research, 196, Article No.104432. doi:10.1016/j.still.2019.104432
  714. Thermodynamik von Kobaltoxid Anodenmaterialien für Lithium-Ionen-Batterien und ihr elektrochemisches Verhalten. PhD dissertation
    Mayer, N. A.
    2020. KIT Scientific Publishing. doi:10.5445/KSP/1000099692
  715. Laser-assisted surface processing for functionalization of polymers on micro- and nano-scale
    Rakebrandt, J.-H.; Zheng, Y.; Besser, H.; Scharnweber, T.; Seifert, H. J.; Pfleging, W.
    2020. Microsystem technologies, 26, 1085–1091. doi:10.1007/s00542-019-04633-7
  716. Recrystallisation towards a single texture component in heavily cold rolled tungsten (W) sheets and its impact on micromechanics
    Reiser, J.; Bonnekoh, C.; Karcher, T.; Pfleging, W.; Weygand, D.; Hoffmann, A.
    2020. International journal of refractory metals & hard materials, 86, Article: 105084. doi:10.1016/j.ijrmhm.2019.105084
  717. Hydrogen diffusion and precipitation in duplex zirconium nuclear fuel cladding quantified by high-resolution neutron imaging
    Gong, W.; Trtik, P.; Colldeweih, A. W.; Duarte, L. I.; Grosse, M.; Lehmann, E.; Bertsch, J.
    2019. Journal of nuclear materials, 526, Art.-Nr. 151757. doi:10.1016/j.jnucmat.2019.151757
  718. First simultaneous detection of helium and tritium inside bubbles in beryllium
    Klimenkov, M.; Vladimirov, P.; Hoffmann, J.; Zimber, N.; Möslang, A.; Kuksenko, V.
    2019. Micron, 127, Art. Nr.: 102754. doi:10.1016/j.micron.2019.102754
  719. Low friction of metallic multilayers by formation of a shear-induced alloy
    Cihan, E.; Störmer, H.; Leiste, H.; Stüber, M.; Dienwiebel, M.
    2019. Scientific reports, 9 (1), 9480. doi:10.1038/s41598-019-45734-7
  720. Laser processing of energy storage materials for pushing lithium-ion battery performances beyond state-of-the-art
    Pfleging, W.; Zheng, Y.; Zhu, P.; Smyrek, P.
    2019, November 13. 12th International Photonics and OptoElectronics Meetings (POEM 2019), Wuhan, China, November 11–14, 2019
  721. Accident-tolerant fuel (ATF) claddings for LWRs
    Steinbrück, M.
    2019. Nuclear España, 411, 32–37
  722. Microcharacterization of Interface Oxide Layer on Laser-Structured Silicon Surfaces of Plated Ni–Cu Solar Cells
    Büchler, A.; Grübel, B.; Arya, V.; Weingärtner, T.; Hähnel, A.; Naumann, V.; Bartsch, J.; Glatthaar, M.; Kluska, S.
    2019. IEEE journal of photovoltaics, 9 (6), 1532–1540. doi:10.1109/JPHOTOV.2019.2938306
  723. Phase evolution of radio frequency magnetron sputtered Cr-rich (Cr,Zr)₂O₃ coatings studied by in situ synchrotron X-ray diffraction during annealing in air or vacuum
    Landälv, L.; Rogström, L.; Lu, J.; Ostach, D.; Eriksson, F.; Junaid, M.; Ghafoor, N.; Ekström, E.; Hsiao, C.-L.; Leiste, H.; Ahlgren, M.; Göthelid, E.; Alling, B.; Hultman, L.; Stüber, M.; Schell, N.; Birch, J.; Eklund, P.
    2019. Journal of materials research, 34 (22), 3735–3746. doi:10.1557/jmr.2019.340
  724. 25 years QUENCH program. Main results of the QUENCH bundle tests
    Stuckert, J.; Große, M.; Steinbrück, M.
    2019, October 22. 25th International QUENCH Workshop (2019), Karlsruhe, Germany, October 22–24, 2019
  725. First results of the QUENCH-20 test with BWR bundle
    Stuckert, J.; Große, M.; Laier, J.; Moch, J.; Peters, U.; Stegmaier, U.; Steinbrück, M.
    2019, October 22. 25th International QUENCH Workshop (2019), Karlsruhe, Germany, October 22–24, 2019
  726. 25 years QUENCH program. Highlights of separate-effects tests
    Steinbrück, M.; Stuckert, J.; Große, M.
    2019, October 22. 25th International QUENCH Workshop (2019), Karlsruhe, Germany, October 22–24, 2019. doi:10.5445/IR/1000100298
  727. Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes
    Zheng, Y.; Rietdorf, C.; Höppchen, O.; Shi, H.; Zhang, Y.; Seifert, H. J.; Pfleging, W.
    2019, October 15. 236th ECS Meeting (2019), Atlanta, GA, USA, October 13–17, 2019
  728. Tuning Electrochemical Performance of Lithium-Ion Cells By Introducing Laser-Generated Electrode Architectures
    Pfleging, W.; Zheng, Y.; Shi, H.; Zhang, Y.; Smyrek, P.
    2019, October 15. 236th ECS Meeting (2019), Atlanta, GA, USA, October 13–17, 2019
  729. Electrode materials for lithium-ion batteries and laser processing
    Pfleging, W.
    2019, October 2. 4th Conference of Engineering and Applied Sciences in Three Frontiers (2019), Foz do Iguaçu, Brazil, October 2–4, 2019
  730. The effect of Ni and Si additions on the oxidation behaviour of Co-17Re-18Cr alloys
    Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
    2019. Corrosion Science, 159, Artkl.Nr.: 108135. doi:10.1016/j.corsci.2019.108135
  731. Preface of the special issue “Thin Films Advances” dedicated to the 75th birthday of Professor Joe Greene
    Petrov, I.; Hultman, L.; Stueber, M.; Chen, L.-C.; Desjardins, P.
    2019. Thin solid films, 688, Article No.137494. doi:10.1016/j.tsf.2019.137494
  732. Nearing final design of the ITER EC H&CD Upper Launcher
    Strauss, D.; Aiello, G.; Bertizzolo, R.; Bruschi, A.; Casal, N.; Chavan, R.; Farina, D.; Figini, L.; Gagliardi, M.; Goodman, T. P.; Grossetti, G.; Heemskerk, C.; Henderson, M. A.; Kasparek, W.; Koning, J.; Landis, J.-D.; Leichtle, D.; Meier, A.; Moro, A.; Nowak, S.; Pacheco, J.; Platania, P.; Plaum, B.; Poli, E.; Ramseyer, F.; Ronden, D.; Saibene, G.; Más-Sanchez, A.; Santos Silva, P.; Sauter, O.; Scherer, T.; Schreck, S.; Sozzi, C.; Spaeh, P.; Vagnoni, M.; Vaccaro, A.; Weinhorst, B.
    2019. Fusion engineering and design, 146, 23–26. doi:10.1016/j.fusengdes.2018.11.013
  733. Pressure tests supporting the qualification of the ITER EC H&CD upper launcher diamond window
    Schreck, S.; Aiello, G.; Casal, N.; Gracia, V.; Henderson, M.; Meier, A.; Saibene, G.; Scherer, T.; Strauss, D.; Wouters, P.
    2019. Fusion engineering and design, 146, 14–18. doi:10.1016/j.fusengdes.2018.11.002
  734. Design of the ITER EC upper launcher nuclear shielding
    Spaeh, P.; Aiello, G.; Casal, N.; Gagliardi, M.; Pacheco, J.; Scherer, T.; Schreck, S.; Strauss, D.; Weinhorst, B.
    2019. Fusion engineering and design, 146, 614–617. doi:10.1016/j.fusengdes.2019.01.036
  735. Design evolution of the diamond window unit for the ITER EC H&CD upper launcher
    Aiello, G.; Casal, N.; Gagliardi, M.; Goodman, T.; Henderson, M.; Meier, A.; Saibene, G.; Scherer, T.; Schreck, S.; Strauss, D.
    2019. Fusion engineering and design, 146, 392–397. doi:10.1016/j.fusengdes.2018.12.075
  736. EU DEMO EC equatorial launcher pre-conceptual performance studies
    Garavaglia, S.; Baiocchi, B.; Bruschi, A.; Čufar, A.; Fanale, F.; Granucci, G.; Moro, A.; Poli, E.; Rispoli, N.; Scherer, T.; Siccinio, M.; Spaeh, P.; Strauss, D.; Tigelis, I.; Tsironis, C.; Franke, T.; Tran, M. Q.
    2019, September. 14th International Symposium on Fusion Nuclear Technology (ISFNT 2019), Budapest, Hungary, September 22–27, 2019
  737. Towards large area CVD diamond disks for Brewster-angle windows
    Schreck, S.; Aiello, G.; Avramidis, K. A.; Franke, T.; Gantenbein, G.; Jelonnek, J.; Meier, A.; Scherer, T.; Strauss, D.; Thumm, M.; Tran, M. Q.; Wild, C.; Woerner, E.
    2019, September. 14th International Symposium on Fusion Nuclear Technology (ISFNT 2019), Budapest, Hungary, September 22–27, 2019
  738. Development of NbN based Kinetic Inductance Detectors for polarimetric diagnostics
    Mazzocchi, F.; Driessen, E. F. C.; Shu, S.; Meier, A.; Strauss, D.; Scherer, T.
    2019, September. Workshop on RF Heating Technology of Fusion Plasmas (US-EU-JPN RF Heating Technology Workshop) (2019), Freiburg, Germany, September 9–12, 2019
  739. Influence of defect structures to dielectric properties in diamond
    Scherer, T.; Strauss, D.
    2019, September. Workshop on RF Heating Technology of Fusion Plasmas (US-EU-JPN RF Heating Technology Workshop) (2019), Freiburg, Germany, September 9–12, 2019
  740. The EC H&CD diamond window - from ITER towards DEMO - some Considerations
    Schreck, S.; Aiello, G.; Meier, A.; Scherer, T.; Spaeh, P.; Strauss, D.
    2019, September. Workshop on RF Heating Technology of Fusion Plasmas (US-EU-JPN RF Heating Technology Workshop) (2019), Freiburg, Germany, September 9–12, 2019
  741. Pre-conceptual design studies for an EC Port Plug and its integration into a EU DEMO Power Plant Equatorial Port
    Spaeh, P.; Aiello, G.; Chavan, R.; Franke, T.; Scherer, T.; Schreck, S.; Strauss, D.
    2019, September. Workshop on RF Heating Technology of Fusion Plasmas (US-EU-JPN RF Heating Technology Workshop) (2019), Freiburg, Germany, September 9–12, 2019
  742. The ITER EC H&CD Upper Launcher and next steps towards DEMO
    Strauß, D.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.
    2019, September. Workshop on RF Heating Technology of Fusion Plasmas (US-EU-JPN RF Heating Technology Workshop) (2019), Freiburg, Germany, September 9–12, 2019
  743. Detailed Design of NbN Based Kinetic Inductance Detectors for Polarimetric Diagnostics
    Mazzocchi, F.; Driessen, E. F. C.; Shu, S.; Straus, D.; Scherer, T.
    2019. 44th International Conference on Infrared, Millimeter, and Terahertz Waves: IRMMW-THz 2019, Paris, 1-6 September 2019, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2019.8874399
  744. Completion of the 8 MW Multi-Frequency ECRH System at ASDEX Upgrade
    Wagner, D. H.; Stober, J. K.; Kircher, M.; Leuterer, F. S. P.; Monaco, F.; Munich, M. J.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B. M.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A. V.; Malygin, V. I.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.
    2019. 44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Paris, F, September 1-6, 2019, Article no: 8874258, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2019.8874258
  745. DEMO-Relevant Gyrotron Research at KIT
    Avramidis, K. A.; Jin, J.; Kalaria, P. C.; Marek, A.; Pagonakis, I. G.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauss, D.; Aiello, G.; Thumm, M.; Tran, M. Q.; Wu, C.; Jelonnek, J.; Brucker, P. T.; Ell, B.; Franke, T.; Gantenbein, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.
    2019. 44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Paris, F, September 1-6, 2019, Article no: 8873771, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2019.8873771
  746. Impacts of layout, surface condition and alloying elements on diffusion welding of micro process devices [Einfluss von Layout, Oberflächenzustand und Legierungselementen auf das Diffusionsschweißen mikroverfahrenstechnischer Apparate]
    Gietzelt, T.; Toth, V.; Weingärtner, T.
    2019. Materials science and engineering technology, 50 (9), 1070–1084. doi:10.1002/mawe.201800197
  747. Investigation of conductive hybrid polymer composites reinforced with copper micro fibers and carbon nanotubes produced by injection molding
    Doagou-Rad, S.; Islam, A.; Antusch, S.; Jung, J.; Klein, A.; Plewa, K.; Piotter, V.
    2019. Materials today / Communications, 20, Art.-Nr.: 100566. doi:10.1016/j.mtcomm.2019.100566
  748. Status of Pb-16Li technologies for European DEMO fusion reactor
    Utili, M.; Bassini, S.; Boccaccini, L.; Bühler, L.; Cismondi, F.; Del Nevo, A.; Eboli, M.; DiFonzo, F.; Hernandez, T.; Wulf, S.; Kordač, M.; Martelli, D.; De les Valls, E. M.; Melichar, T.; Mistrangelo, C.; Tarantino, M.; Tincani, A.; Vála, L.
    2019. Fusion engineering and design, 146 (B), 2676–2681. doi:10.1016/j.fusengdes.2019.04.083
  749. Interface and requirements analysis on the DEMO Heating and Current Drive system using Systems Engineering methodologies
    Grossetti, G.; Baylard, C.; Franke, T.; Gafert, J.; Jenkins, I.; Siccinio, M.; Strauß, D.; Tran, M. Q.; Zohm, H.
    2019. Fusion engineering and design, 146 (Part B), 2078–2082. doi:10.1016/j.fusengdes.2019.03.107
  750. Initial port integration concept for EC and NB systems in EU DEMO tokamak
    Franke, T.; Agostinetti, P.; Bachmann, C.; Bruschi, A.; Carr, M.; Cismondi, F.; Cufar, A.; Esch, H. P. L. de; Federici, G.; Harder, N. den; Garavaglia, S.; Grossetti, G.; Granucci, G.; Meakins, A.; Moro, A.; Mozzillo, R.; Sartori, E.; Siccinio, M.; Sonato, P.; Strauss, D.; Tran, M. Q.; Valentine, A.; Zheng, S.
    2019. Fusion engineering and design, 146 (Part B), 1642–1646. doi:10.1016/j.fusengdes.2019.03.007
  751. Thermophysical and mechanical properties of W-Cu laminates produced by FAST joining [
    Galatanu, A.; Galatanu, M.; Enculescu, M.; Reiser, J.; Sickinger, S.
    2019. Fusion engineering and design, 146, 2371–2374. doi:10.1016/j.fusengdes.2019.03.193
  752. Influence of defect structures to dielectric properties in poly- and single crystalline diamond for heating and diagnostics applications in fusion reactors
    Scherer, T.
    2019, August. 20 International Conference on Radiation Effects in Insulators (2019), Nur-Sultan, Kazakhstan, August 19–23, 2019
  753. Fracture behavior of random distributed short tungsten fiber-reinforced tungsten composites
    Mao, Y.; Coenen, J. W.; Riesch, J.; Sistla, S.; Almanstötter, J.; Reiser, J.; Terra, A.; Chen, C.; Wu, Y.; Raumann, L.; Höschen, T.; Gietl, H.; Neu, R.; Linsmeier, C.; Broeckmann, C.
    2019. Nuclear fusion, 59 (8), Art. Nr.: 086034. doi:10.1088/1741-4326/ab25b0
  754. Microstructure and corrosion behavior of laser induced periodic patterned titanium based alloy
    Kumari, R.; Pfleging, W.; Besser, H.; Majumdar, J. D.
    2019. Optics & laser technology, 116, 196–213. doi:10.1016/j.optlastec.2019.03.017
  755. Preliminary interpretative analysis of the QUENCH-18 bundle test using SCDAPSim/mod3.5
    Birchley, J. C.; Stuckert, J.; Steinbrueck, M.; Grosse, M.
    2019. Annals of nuclear energy, 130, 20–33. doi:10.1016/j.anucene.2019.02.022
  756. Corrosion Interaction of 9%Cr Ferritic/Martensitic Steels at 450 and 550 °C With Flowing Pb–Bi Eutectic Containing 10⁻⁷ Mass % Dissolved Oxygen
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2019. Journal of nuclear engineering and radiation science, 5 (3), Article No.031201. doi:10.1115/1.4041432
  757. Corrosion resistance and microstructural stability of austenitic Fe–Cr–Al–Ni model alloys exposed to oxygen-containing molten lead
    Shi, H.; Jianu, A.; Weisenburger, A.; Tang, C.; Heinzel, A.; Fetzer, R.; Lang, F.; Stieglitz, R.; Müller, G.
    2019. Journal of nuclear materials, 524, 177–190. doi:10.1016/j.jnucmat.2019.06.043
  758. High-temperature reactions and phase evolution in precursor-derived ZrB2/Si-C-N composites
    Markel, I. J.; Glaser, J.; Steinbrück, M.; Seifert, H. J.
    2019. Journal of the European Ceramic Society, 39 (8), 2585–2593. doi:10.1016/j.jeurceramsoc.2019.03.019
  759. Lessons Learned from the Final Design Process of the ITER EC Upper Launcher Structural System
    Spaeh, P.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.
    2019, June. 28th IEEE Symposium on Fusion Engineering (SOFE 2019), Ponte Vedra Beach, FL, USA, June 2–6, 2019
  760. Diamond loss physics: Theoretical considerations and experimental results
    Scherer, T.
    2019, June. 31st Joint Russian-German Meeting on ECRH and Gyrotrons (2019), Lenggries, Germany, June 3–8, 2019
  761. The ITER ECRH diamond window: Status review of the development of this Safety Importance Class I component (SIC-1)
    Schreck, S.; Aiello, G.; Meier, A.; Scherer, T.; Strauss, D.; Spaeh, P.
    2019, June. 31st Joint Russian-German Meeting on ECRH and Gyrotrons (2019), Lenggries, Germany, June 3–8, 2019
  762. Overview of recent gyrotron R&D towards DEMO within EUROfusion Work Package Heating and Current Drive
    Avramidis, K. A.; Aiello, G.; Alberti, S.; Brücker, P. T.; Bruschi, A.; Chelis, I.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Genoud, J.; George, M.; Granucci, G.; Grossetti, G.; Hogge, J.-P.; Illy, S.; Ioannidis, Z. C.; Jelonnek, J.; Jin, J.; Kalaria, P. C.; Latsas, G. P.; Marek, A.; Pagonakis, I. G.; Peponis, D. V.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Tigelis, I.; Wu, C.; Zein, A.; Zisis, A.; Tran, M. Q.
    2019. Nuclear fusion, 59 (6), Article no: 066014. doi:10.1088/1741-4326/ab12f9
  763. Experimental results of the bundle test QUENCH-19 with FeCrAl claddings
    Stuckert, J.; Große, M.; Steinbrück, M.; Terrani, K.
    2019, May 17. ATF Topical Meeting (2019), Shenzhen, China, May 16–17, 2019
  764. Dielectric high power characterization of a F-passivated diamond disk surface for fusion applications
    Scherer, T. A.; Strauss, D.
    2019, May. 13th International New Diamond and Nano Carbons Conference (NDNC 2019), Hualien City, Taiwan, May 12–17, 2019
  765. Vacancies and interstitials in yttrium
    Borodin, V. A.; Vladimirov, P. V.
    2019. Journal of physics / Condensed matter, 31 (18), Art. Nr.: 185401. doi:10.1088/1361-648X/ab0255
  766. Structural, optical and morphological properties of hybrid heterostructures on the basis of GaN grown on compliant substrate por-Si(111)
    Seredin, P. V.; Lenshin, A. S.; Mizerov, A. M.; Leiste, H.; Rinke, M.
    2019. Applied surface science, 476, 1049–1060. doi:10.1016/j.apsusc.2019.01.239
  767. Diamantfenster fürs Sonnenfeuer - Forscher des Karlsruher Instituts für Technologie entwickeln Diamantscheiben für den Fusionsreaktor ITER - Campusreport am 30.04.2019
    Fuchs, S.; Scherer, T.
    2019. doi:10.5445/DIVA/2019-286
  768. From W7-X Towards ITER and Beyond: 2019 Status on EU Fusion Gyrotron Developments
    Jelonnek, J.; Aiello, G.; Albaiar, F.; Alberti, S.; Avramidis, K. A.; Bertinetti, A.; Brucker, P. T.; Bruschi, A.; Chclis, I.; Dubray, J.; Fanale, F.; Fasel, D.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Genoud, J.; Granucci, G.; Hogge, J.-P.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Laqua, H.; Latsas, G. P.; Lcggieri, A.; Legrand, F.; Marchesin, R.; Marek, A.; Marletaz, B.; Obermaier, M.; Pagonakis, I. G.; Peponis, D. V.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Sanchez, P.; Savoldi, L.; Scherer, T.; Strauss, D.; Thouvenin, P.; Thumm, M.; Tigelis, I.; Tran, M.-Q.; Wilde, F.; Wu, C.; Zisis, A.
    2019. 2019 International Vacuum Electronics Conference (IVEC), Busan, South Korea, 28 April-1 May 2019, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IVEC.2019.8744989
  769. The measurement of Ag/In/Cd release under air-ingress conditions in the QUENCH-18 bundle test
    Kalilainen, J.; Lind, T.; Stuckert, J.; Bergfeldt, T.; Sippula, O.; Jokiniemi, J.
    2019. Journal of nuclear materials, 517, 315–327. doi:10.1016/j.jnucmat.2019.02.021
  770. Lessons learned from the QUENCH-LOCA experiments at KIT
    Stuckert, J.
    2019, March 13. 23rd International Seminar ZIRAT on Zirconium Alloy Technology (2019), Palma, Spain, March 11–13, 2019
  771. Diffusion multiple study of the Co-Fe-Ni system at 800 °C
    Yuan, Y.; Chen, T.; Li, D.; Gerhards, U.; Pan, F.; Seifert, H.; Moelans, N.
    2019. Calphad, 64, 149–159. doi:10.1016/j.calphad.2018.12.005
  772. Development of an electrochemical sensor for hydrogen detection in liquid lithium for IFMIF-DONES
    Holstein, N.; Krauss, W.; Konys, J.; Nitti, F. S.
    2019. Fusion engineering and design, 146B, 1441–1445. doi:10.1016/j.fusengdes.2019.02.100
  773. Precipitation phenomena during corrosion testing in forced-convection Pb-15.7Li loop PICOLO
    Krauss, W.; Wulf, S.-E.; Lorenz, J.; Konys, J.
    2019. Fusion engineering and design, 146B, 1782–1785. doi:10.1016/j.fusengdes.2019.03.034
  774. Recent progress in using laser structured high energy electrode materials for next generation batteries
    Pfleging, W.; Smyrek, P.; Rakebrandt, J.-H.; Chen, X.; Zhang, Y.; Zheng, Y.
    2019, February 7. 13 Laser-Based Micro- and Nanoprocessing (2019), San Francisco, CA, USA, February 2–7, 2019. doi:10.1117/12.2515726
  775. Corrigendum to “On the influence of microstructure on the fracture behaviour of hot extruded ferritic ODS steels” [J. Nucl. Mater. 497 (2017) 60–75]
    Das, A.; Viehrig, H. W.; Altstadt, E.; Heintze, C.; Hoffmann, J.
    2019. Journal of nuclear materials, 514, 399–400. doi:10.1016/j.jnucmat.2018.11.034
  776. High‐Performance Ferroelectric–Dielectric Multilayered Thin Films for Energy Storage Capacitors
    Silva, J. P. B.; Silva, J. M. B.; Oliveira, M. J. S.; Weingärtner, T.; Sekhar, K. C.; Pereira, M.; Gomes, M. J. M.
    2019. Advanced functional materials, 29 (6), Article: 1807196. doi:10.1002/adfm.201807196
  777. Post-test analyses of the CORA-15 bundle test with the system codes ATHLET-CD and SOCRAT
    Stuckert, J.; Austregesilo, H.; Bals, C.; Hollands, T.; Kiselev, A.; Tomashchik, D.; Yudina, T.
    2019. Nuclear engineering and design, 342, 320–335. doi:10.1016/j.nucengdes.2018.12.015
  778. Experimental and computational analysis of PSZ 10- and PSZ 20-derived Si-C-N ceramics
    Markel, I. J.; Glaser, J.; Steinbrück, M.; Seifert, H. J.
    2019. Journal of the European Ceramic Society, 39 (2-3), 195–204. doi:10.1016/j.jeurceramsoc.2018.08.045
  779. Interdiffusion in as-deposited Ni/Ti multilayer thin films analyzed by atom probe tomography
    Aboulfadl, H.; Seifried, F.; Stüber, M.; Mücklich, F.
    2019. Materials letters, 236, 92–95. doi:10.1016/j.matlet.2018.10.085
  780. On the EU-Japan roadmap for experimental research on corium behavior
    Bechta, S.; Ma, W.; Miassoedov, A.; Journeau, C.; Okamoto, K.; Manara, D.; Bottomley, D.; Kurata, M.; Sehgal, B. R.; Stuckert, J.; Steinbrueck, M.; Fluhrer, B.; Keim, T.; Fischer, M.; Langrock, G.; Piluso, P.; Hozer, Z.; Kiselova, M.; Belloni, F.; Schyns, M.
    2019. Annals of nuclear energy, 124, 541–547. doi:10.1016/j.anucene.2018.10.019
  781. Calorimeters to advance thermal management and safety of batteries
    Ziebert, C.; Uhlmann, N.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2019, January 28. 9. Advanced Automotive Battery Conference (AABC 2019), Strasbourg, France, January 27–31, 2019
  782. Experimentelle Charakterisierung und Simulation der Schädigungsentwicklung in Vorgerüst-Arbeitswalzen
    Fota, K.; Cestonaro, A.; Heisterkamp, P.; Spannagel, F.; Jacke, H.; Gorr, B.; Christ, H.-J.
    2019. Hrsg.: H.-J. Christ Prüftechnik – Kennwertermittlung – Schadensvermeidung, Tagung Werkstoffprüfung 2019, 03.-04. Dez. 2019 in Neu-Ulm, INVENTUM GmbH, Sankt Augistin, 2019, 385–390
  783. FEM Analyses of the ITER EC H&CD Torus Diamond Window Unit Towards the Prototyping Activity
    Aiello, G.; Casal, N.; Estébanez, P.; Gràcia, V.; Henderson, M.; Meier, A.; Saibene, G.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.
    2019. 14th International Symposium on Fusion Nuclear Technology (ISFNT 2019), Budapest, Hungary, September 22–27, 2019
  784. First results from an event synchronized—high repetition Thomson scattering system at Wendelstein 7-X
    W7-X Team; Damm, H.; Pasch, E.; Dinklage, A.; Baldzuhn, J.; Bozhenkov, S. A.; Brunner, K. J.; Effenberg, F.; Fuchert, G.; Geiger, J.; Harris, J. H.; Knauer, J.; Kornejew, P.; Kremeyer, T.; Krychowiak, M.; Schilling, J.; Schmitz, O.; Scott, E. R.; Winters, V. R.; Gantenbein, G.; Huber, M.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Mellein, D.; Papenfuß, D.; Scherer, T.; Thumm, M.; Wadle, S.; Weggen, J.
    2019. Journal of Instrumentation, 14 (9). doi:10.1088/1748-0221/14/09/C09037
  785. Safety-related studies on heavy-liquid metal technology for advanced reactors in Europe
    Pacio, J.; Schroer, C.; Tromm, W.; Weisenburger, A.
    2019. CD-Rom Proceedings AMNT 2019 - 50. Jahrestagung Kerntechnik / 50th Annual Meeting on Nuclear Technology (AMNT 2019), Berlin, CD-ROM, INFORUM Verlags- und Verwaltungsgesellschaft mbH
  786. Combinatorial Approaches in the Development of PVD High Performance Thin Films for Engineering Applications
    Stüber, M.
    2019. International Thin Films Conference (TACT 2019), Taipei, Taiwan, November 17–20, 2019
  787. Fuel Modelling in Accident Conditions (FUMAC). Final Report of a Coordinated Research Project
    Boulore, A.; Chan, P.; Pastore, G.; Pizzocri, D.; Rathod, V.; Stuckert, J.; Van Uffelen, P.; Veshchunov, M.; Wiesenack, W.; Zhang, J.
    2019. International Atomic Energy Agency
  788. ICMCTF 2018–Preface
    Aouadi, S.; Broitman, E.; Figueroa, C. A.; Greczynski, G.; Zapien, J. A.; Stüber, M.
    2019. Thin solid films, 669, 670. doi:10.1016/j.tsf.2018.10.040
  789. Syntheses, Crystal Structure, Electrocatalytic, and Magnetic Properties of the Monolanthanide-Containing Germanotungstates [Ln(HO)GeWO] (Ln = Dy, Er, n = 4,3)
    Ibrahim, M.; Mbomekallé, I. M.; De Oliveira, P.; Baksi, A.; Carter, A. B.; Peng, Y.; Bergfeldt, T.; Malik, S.; Anson, C. E.
    2019. ACS omega, 4 (26), 21873–21882. doi:10.1021/acsomega.9b02846
  790. ICMCTF 2018 – Preface
    Aouadi, S.; Broitman, E.; Figueroa, C. A.; Greczynski, G.; Zapien, J. A.; Stüber, M.
    2019. Surface and coatings technology, 357, 1014. doi:10.1016/j.surfcoat.2018.10.070
  791. Development of RF-MEAM interaction potentials for Fe-Y. PhD dissertation
    Koch, S.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000104174
  792. Entwicklung von Kathoden für Lithium-Ionen-Dünnschichtbatterien im System Lithium-Nickel-Mangan-Kobalt-Sauerstoff, hergestellt mittels HF-Magnetronzerstäubung. PhD dissertation
    Strafela, M.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000104150
  793. Influences of pebble geometry on the thermomechanical behaviour of ceramic breeder pebble beds
    Reimann, J.
    2019. Proceedings of the 20th International Workshop on Ceramic Breeder Blanket Interactions (CBBI-20) : September 18-20, 2019, KIT, Germany. Ed.: Regina Knitter, 214–225, Karlsruher Institut für Technologie (KIT)
  794. Brewster-angle diamond window for microwave application
    Aiello, G.; Scherer, T.; Franke, T.; Jelonnek, J.; Meier, A.; Strauss, D.; Tran, Q.; Wild, C.; Wörner, E.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Kristalline Festkörper und deren Mikrostruktur (2019), Regensburg, Germany, March 31–April 5, 2019
  795. Oxidation and Quench Behavior of Cold Spraying Cr-Coated Zircaloy Fuel Cladding Under Severe Accident Scenarios [in press]
    Tang, C.; Grosse, M.; Martin Steinbrueck; Shirvan, K.
    2019. TopFuel 2019, 855–863
  796. Results of the bundle test QUENCH-19 with FeCrAl claddings
    Stuckert, J.; Grosse, M.; Steinbrueck, M.; Terrani, K.
    2019. Proceedings of Global/Top Fuel 2019, Seattle, WA, September 22-26, 2019, 922–927, American Nuclear Society (ANS)
  797. Round Robin Exercise of the Candidate ATF Cladding Materials Within the ACTOF Project [in press]
    Ševeček, M.; Krejčí, J.; Chalupová, A.; Kabátová, J.; Manoch, F.; Kočí, J.; Cvrček, L.; Tang, C.; Steinbrűck, M.; Grosse, M.; Penttilä, S.; Autio, J.-M.; Lydman, J.; Toivonen, A.; Sartowska, B.; Starosta, W.; Waliś, L.; Hózer, Z.; Novotny, T.; Perezné-Feró, E.; Pintér Csordás, A.; Horváth, M.; Szabó, P.; Giovedi, C.; Xu, P.
    2019. Top Fuel 2019, American Nuclear Society, Seattle, WA, September, 22-26, 283–290, Greyden Press
  798. Application of a newly developed computer code model for nitriding and re-oxidation of cladding materials on separate effect tests and integral experiments [in press]
    Jäckel, B. S.; Lind, T.; Fernandez-Moguel, L.; Steinbrück, M.; Park, S.
    2019. 9th Conference on severe accident research - ERMSAR 2019, march 18 - 20, 2019 - Prague, Czech Republic, 196/1–14
  799. CoreSOAR Core Degradation State-of-the Art Report Update: Conclusions [in press]
    Haste, T.; Barrachin, M.; Fichot, F.; Repetto; G.; Miassoedov, M.; Steinbrück, M.; Stuckert, J.; Buck, M.; Bechta, S.; Le Belguet, A.; Hollands, T.; Journeau, C.; Pontillon, Y.; Lind, T.; Birchley, J.; Hozer, Z.; Horvath, G. L.; Bottomley, P. D. W.
    2019. 9th Conference on Severe Accident Research (ERMSAR2019), Prague, Czech Republic, March 18-20, 2019, paper 022
  800. Preparation and characterization of rhombohedral metal-oxide thin films on c-plane α-Al2O substrates. PhD dissertation
    Gao, Y.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000100318
  801. 25th International QUENCH Workshop : 22-24 October 2019, Karlsruhe Institute of Technology, Karlsruhe, Germany
    Steinbrück, M. (Ed.)
    2019. Karlsruher Institut für Technologie (KIT)
  802. Key factors for room-temperature ductility of monolithic tungsten sheets
    Bonnekoh, C.; Leiste, H.; Hoffmann, A.; Reiser, J.; Rieth, M.
    2019. 19th International Conference on Fusion Reactor Materials (ICFRM-20 2019), La Jolla, CA, USA, October 27–November 1, 2019
  803. 2019 Status and Focus Areas in the Development of an Advanced Gyrotron for EU DEMO
    Jelonnek, J.; Avramidis, K. A.; Aiello, G.; Alberti, S.; Brücker, P.; Bruschi, A.; Chelis, I.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Genoud, J.; George, M.; Granucci, G.; Hogge, J.-P.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Latsas, G. P.; Marek, A.; Pagonakis, I. G.; Peponis, D. V.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Tigelis, I.; Wu, C.; Zisis, A.; Tran, M. Q.
    2019. Workshop on RF Heating Technology of Fusion Plasmas (US-EU-JPN RF Heating Technology Workshop) (2019), Freiburg, Germany, September 9–12, 2019
  804. Lithium distribution in structured graphite anodes investigated by laser-induced breakdown spectroscopy
    Zheng, Y.; Pfäffl, L.; Seifert, H. J.; Pfleging, W.
    2019. Applied Sciences, 9 (20), Article No.4218. doi:10.3390/app9204218
  805. Progress in the synthesis of Al- and Cr-based sesquioxide coatings for protective applications
    Koller, C. M.; Stueber, M.; Mayrhofer, P.-H.
    2019. Journal of vacuum science & technology / A, 37 (6), Article No.060802. doi:10.1116/1.5120793
  806. Supersonic crowdion clusters in 2D Morse lattice
    Shepelev, I. A.; Korznikova, E. A.; Bachurin, D. V.; Semenov, A. S.; Chetverikov, A. P.; Dmitriev, S. V.
    2019. Physics letters / A, 384 (1), Article No.126032. doi:10.1016/j.physleta.2019.126032
  807. Improved Capacity Retention of SiO-Coated LiNiMnCoO Cathode Material for Lithium-Ion Batteries
    Lu, X.; Zhang, N.; Jahn, M.; Pfleging, W.; Seifert, H. J.
    2019. Applied Sciences, 9 (18), 3671. doi:10.3390/app9183671
  808. The ultrafast laser ablation of Li(NiMnCo)O electrodes with high mass loading
    Zhu, P.; Seifert, H. J.; Pfleging, W.
    2019. Applied Sciences, 9 (19), Article: 4067. doi:10.3390/app9194067
  809. Diamond Window Technology for Electron Cyclotron Heating and Current Drive: State of the Art
    Aiello, G.; Scherer, T.; Avramidis, K.; Casal, N.; Franke, T.; Gagliardi, M.; Gantenbein, G.; Henderson, M.; Jelonnek, J.; Meier, A.; Saibene, G.; Schreck, S.; Strauss, D.; Thumm, M.; Tran, M. Q.; Wild, C.; Woerner, E.
    2019. Fusion science and technology, 75 (7), 719–729. doi:10.1080/15361055.2019.1643690
  810. Femtosecond Laser Processing of Thick Film Cathodes and Its Impact on Lithium-Ion Diffusion Kinetics
    Pfleging, W.; Gotcu, P.
    2019. Applied Sciences, 9 (17), Article no: 3588. doi:10.3390/app9173588
  811. Irradiation damage and lifetimes of materials and components. Impact of operational conditions
    Hesch, K.; Aktaa, J.; Gaganidze, E.; Rieth, M.; Vladimirov, P.
    2019. 6th IAEA DEMO Programme Workshop (DPWS 2019), Moscow, Russia, October 1–4, 2019
  812. Weiterentwicklung experimenteller Methoden zur Ermittlung thermodynamischer Werkstoffdaten von Lithium-Ionen-Batterien. PhD dissertation
    Giel, H.
    2019. KIT Scientific Publishing. doi:10.5445/KSP/1000098844
  813. Calorimetric studies of mixing enthalpy in the liquid system Ga-Li, and Ga-Li-Sn
    Fels, J.; Berger, P.; Reichmann, T. L.; Seifert, H. J.; Flandorfer, H.
    2019. Journal of molecular liquids, 295, Article: 111578. doi:10.1016/j.molliq.2019.111578
  814. Tensile and impact properties of tungsten-rhenium alloy for plasma-facing components in fusion reactor
    Watanabe, S.; Nogami, S.; Reiser, J.; Rieth, M.; Sickinger, S.; Baumgärtner, S.; Miyazawa, T.; Hasegawa, A.
    2019. Fusion engineering and design, 148, Art. Nr.: 111323. doi:10.1016/j.fusengdes.2019.111323
  815. Effects of neutron irradiation on the brittle to ductile transition in single crystal tungsten
    Abernethy, R. G.; Gibson, J. S. K.-L.; Giannattasio, A.; Murphy, J. D.; Wouters, O.; Bradnam, S.; Packer, L. W.; Gilbert, M. R.; Klimenkov, M.; Rieth, M.; Schneider, H.-C.; Hardie, C. D.; Roberts, S. G.; Armstrong, D. E. J.
    2019. Journal of nuclear materials, 527, Article: 151799. doi:10.1016/j.jnucmat.2019.151799
  816. Microstructural evolution of EUROFER-ODS alloy under neutron irradiation
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Möslang, A.
    2019. Microscopy Conference (MC 2019), Berlin, Germany, September 1–5, 2019
  817. The influence of Fe-ion irradiation on the microstructure of reduced activation ferritic-martensitic steel Eurofer 97
    Rogozhkin, S. V.; Nikitin, A. A.; Khomich, A. A.; Lukyanchuk, A. A.; Raznitsyn, O. A.; Shutov, A. S.; Fedin, P. A.; Kulevoy, T. V.; Vasiliev, A. L.; Presnyakov, M. Y.; Möslang, A.; Lindau, R.; Vladimirov, P.
    2019. Nuclear fusion, 59 (8), Article: 086018. doi:10.1088/1741-4326/ab1e18
  818. Comparison of K-doped and pure cold-rolled tungsten sheets: As-rolled condition and recrystallization behaviour after isochronal annealing at different temperatures
    Lied, P.; Bonnekoh, C.; Pantleon, W.; Stricker, M.; Hoffmann, A.; Reiser, J.
    2019. International journal of refractory metals & hard materials, 85, 105047. doi:10.1016/j.ijrmhm.2019.105047
  819. Dose Dependence of Micro-Voids Distributions in Low-Temperature Neutron Irradiated Eurofer97 Steel
    Coppola, R.; Klimenkov, M.
    2019. Metals, 9 (5), 552. doi:10.3390/met9050552
  820. Experimental investigation of phase equilibria in the Al–Cr–Fe system
    Rank, M.; Franke, P.; Hoffmann, J.; Seifert, H. J.
    2019. Calphad, 66, 101638. doi:10.1016/j.calphad.2019.101638
  821. Influence of current density on the adhesion of seedless electrodeposited copper layers on silicon
    Goncalves de Cerqueira Lima, F.; Mescheder, U.; Leiste, H.; Müller, C.
    2019. Surface and coatings technology, 375, 554–564. doi:10.1016/j.surfcoat.2019.07.007
  822. Progress in the Development of a 1.5 MW, 140 GHz Gyrotron for the Upgrade of the ECRH System at W7-X
    Avramidis, K. A.; Ioannidis, Z. C.; Aiello, G.; Chelis, I.; Dinklage, A.; Gantenbein, G.; Illy, S.; Jin, J.; Laqua, H. P.; Marek, A.; Marsen, S.; Noke, F.; Pagonakis, I. G.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Stange, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Wagner, D.; Weggen, J.; Wolf, R. C.; Jelonnek, J.
    2019. Workshop on RF Heating Technology of Fusion Plasmas (US-EU-JPN RF Heating Technology Workshop) (2019), Freiburg, Germany, September 9–12, 2019
  823. Liquid Metals, materials and Safety Measures to Progress to CSP 2.0
    Hering, W.; Onea, A.; Jianu, A.; Reiser, J.; Ulrich, S.; Stieglitz, R.
    2019. SolarPACES 2018: International Conference on Concentrating Solar Power and Chemical Energy Systems. Ed.: C. Richter, Article No.080002, American Institute of Physics (AIP). doi:10.1063/1.5117597
  824. Entwicklung metallischer PVD-Schichten für NiTi-Substrate mit großer Verformbarkeit. PhD dissertation
    Seifried, F.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000097023
  825. Thermodynamic investigations in the Al–Fe system: Thermodynamic modeling using CALPHAD
    Rank, M.; Franke, P.; Seifert, H. J.
    2019. International journal of materials research, 110 (5), 406–421. doi:10.3139/146.111765
  826. ITER Torus Diamond Window Unit: FEM Analyses and Impact on the Design
    Aiello, G.; Gagliardi, M.; Meier, A.; Saibene, G.; Scherer, T. A.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2019. IEEE transactions on plasma science, 47 (7), 3289–3297. doi:10.1109/TPS.2019.2918861
  827. Contactless monitoring of temperature change in cutting inserts by application of hard coatings and ferromagnetic film sensor phases
    Seemann, K.; Beirle, S.; Thede, C.; Schier, V.; Quandt, E.
    2019. Sensors and actuators <Lausanne> / A, A (296), 278–285. doi:10.1016/j.sna.2019.07.026
  828. Development and application of phase diagrams for Li-ion batteries using CALPHAD approach
    Li, N.; Li, D.; Zhang, W.; Chang, K.; Dang, F.; Du, Y.; Seifert, H. J.
    2019. Progress in natural science: materials international, 29 (3), 265–276. doi:10.1016/j.pnsc.2019.05.007
  829. Microstructure of Al-containing magnetron sputtered TiB₂ thin films
    Stüber, M.; Riedl, H.; Wojcik, T.; Ulrich, S.; Leiste, H.; Mayrhofer, P. H.
    2019. Thin solid films, 688, Article: 137361. doi:10.1016/j.tsf.2019.06.011
  830. Weiterentwicklung experimenteller Methoden zur Ermittlung thermodynamischer Werkstoffdaten von Lithium-Ionen-Batterien. PhD dissertation
    Giel, H.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000096293
  831. Carbon films deposited by mixed-mode high power impulse magnetron sputtering for high wear resistance: The role of argon incorporation
    Akhavan, B.; Ganesan, R.; Stueber, M.; Ulrich, S.; McKenzie, D. R.; Bilek, M. M. M.
    2019. Thin solid films, 688, Article: 137353. doi:10.1016/j.tsf.2019.06.003
  832. 3D silicon/graphite composite electrodes for high-energy lithium-ion batteries
    Zheng, Y.; Seifert, H. J.; Shi, H.; Zhang, Y.; Kübel, C.; Pfleging, W.
    2019. Electrochimica acta, 317, 502–508. doi:10.1016/j.electacta.2019.05.064
  833. Long-term stability of the microstructure of austenitic ODS steel rods produced with a carbon-containing process control agent
    Gräning, T.; Klimenkov, M.; Rieth, M.; Heintze, C.; Möslang, A.
    2019. Journal of nuclear materials, 523, 111–120. doi:10.1016/j.jnucmat.2019.05.060
  834. Megawatt Power Generation of the Dual-Frequency Gyrotron for TCV at 84 and 126 GHz, in Long Pulses
    Hogge, J.-P.; Alberti, S.; Avramidis, K. A.; Bruschi, A.; Bin, W.; Cau, F.; Cismondi, F.; Dubray, J.; Fasel, D.; Gantenbein, G.; Garavaglia, S.; Genoud, J.; Goodman, T. P.; Illy, S.; Jin, J.; Legrand, F.; Marchesin, R.; Marlétaz, B.; Masur, J.; Moro, A.; Moura, C.; Pagonakis, I. G.; Périal E.; Savoldi, L.; Scherer, T.; Siravo, U.; Thumm, M.; Toussaint, M.; Tran, M.-Q.
    2019. 23rd Topical Conference on Radiofrequency Power in Plasmas (2019), Hefei, China, May 14–17, 2019
  835. Entwicklung eines ferromagnetischen Schichtsystems auf Hartmetallsubstraten für die Anwendung als Temperatur- und Kraftsensor. PhD dissertation
    Beirle, S.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000096044
  836. Safety-related studies on heavy-liquid metal technology for advanced reactors in Europe
    Pacio, J.; Schroer, C.; Tromm, W.; Weisenburger, A.
    2019. 50. Jahrestagung Kerntechnik (2019), Berlin, Germany, May 7–8, 2019
  837. Crystallization of two rare-earth aluminosilicate glass-ceramics using conventional and microwave heat-treatments
    Ahmad, S.; Mahmood, M. M.; Seifert, H. J.
    2019. Journal of alloys and compounds, 797, 45–57. doi:10.1016/j.jallcom.2019.05.100
  838. Mechanical properties and microstructure characterization of Eurofer97 steel variants in EUROfusion program
    Chen, X.; Bhattacharya, A.; Sokolov, M. A.; Clowers, L. N.; Yamamoto, Y.; Gräning, T.; Linton, K. D.; Katoh, Y.; Rieth, M.
    2019. Fusion engineering and design, 146 (Part B), 2227–2232. doi:10.1016/j.fusengdes.2019.03.158
  839. Tribological and anticorrosion behavior of self-healing coating containing nanocapsules
    Sun, J.; Wang, Y.; Li, N.; Tian, L.
    2019. Tribology international, 136, 332–341. doi:10.1016/j.triboint.2019.03.062
  840. Behavior of tungsten under irradiation and plasma interaction
    Rieth, M.; Doerner, R.; Hasegawa, A.; Ueda, Y.; Wirtz, M.
    2019. Journal of nuclear materials, 519, 334–368. doi:10.1016/j.jnucmat.2019.03.035
  841. Electrochemical techniques as innovative tools for fabricating divertor and blanket components in fusion technology
    Wulf, S.-E.; Lorenz, J.; Holstein, N.; Krauss, W.
    2019. Fusion engineering and design, 146A, 460–464. doi:10.1016/j.fusengdes.2018.12.091
  842. In Situ SEM Observation of Structured Si/C Anodes Reactions in an Ionic-Liquid-Based Lithium-Ion Battery
    Shi, H.; Liu, X.; Wu, R.; Zheng, Y.; Li, Y.; Cheng, X.; Pfleging, W.; Zhang, Y.
    2019. Applied Sciences, 9 (5), Article no: 956. doi:10.3390/app9050956
  843. Coresoar core degradation soar update: summary
    Haste, T.; Barrachin, M.; Fichot, F.; Repetto, G.; Miassoedov, A.; Steinbrück, M.; Stuckert, J.; Buck, M.; Bechta, S.; Le Belguet, A.; Hollands, T.; Journeau, C.; Pontillon, Y.; Lind, T.; Birchley, J.; Hózer, Z.; Horvath, G. L.; Bottomley, P. D. W.
    2019. The 9TH European Review Meeting on Severe Accident Research (ERMSAR2019), Prag, CZ, March 18-20, 2019
  844. CLADS research for Fukushima Daiichi as contribution for the SAFEST Severe Accident Research Programme
    Kurata, M.; Okamoto, K.; Nagae, Y.; Bottomley, D.; Pshenichnikov, A.; Sudo, A.; Pham, H.; Bechta, S.; Stuckert, J.
    2019. The 9TH European Review Meeting on Severe Accident Research (ERMSAR2019), Czech Republic, March 18-20, 2019
  845. Pre- and Post-Test Simulations of the QUENCH-18 Bundle Experiment in the frame of the NUGENIA QUESA Project
    Hollands, T.; Bals, C.; Tiborcz, L.; Beuzet, E.; Vasiliev, A.; Kaliatka, T.; Birchley, J.; Steinbrück, M.; Stuckert, J.
    2019. The 9TH European Review Meeting on Severe Accident Research (ERMSAR2019), Czech Republic, March 18-20, 2019, Paper 76
  846. First aerosol results of the QUENCH-18 bundle test
    Kalilainen, J.; Lind, T.; Stuckert, J.; Stegmaier, U.
    2019. 9th European Review Meeting on Severe Accident Research Severe Accident Research Conference (ERMSAR 2019), Prag, CZ, March 18-20, 2019, Paper 19
  847. Laser-induced breakdown spectroscopy for the quantitative measurement of lithium concentration profiles in structured and unstructured electrodes
    Smyrek, P.; Bergfeldt, T.; Seifert, H. J.; Pfleging, W.
    2019. Journal of materials chemistry / A, 7 (10), 5656–5665. doi:10.1039/C8TA10328C
  848. European materials development: Results and perspective
    Pintsuk, G.; Diegele, E.; Dudarev, S. L.; Gorley, M.; Henry, J.; Reiser, J.; Rieth, M.
    2019. Fusion engineering and design, 146A, 1300–1307. doi:10.1016/j.fusengdes.2019.02.063
  849. Oxidation of SiC-SiC CMC cladding tubes for GFR application in impure helium atmosphere and materials interactions with tantalum liner at high temperatures up to 1600°C
    Steinbrueck, M.; Angelici Avincola, V.; Markel, I. J.; Stegmaier, U.; Gerhards, U.; Seifert, H. J.
    2019. Journal of nuclear materials, 517, 337–348. doi:10.1016/j.jnucmat.2019.02.024
  850. Improved Simulation of Quasi-Optical Launchers for High Power Gyrotrons with Smoothing Algorithm
    Jin, J.; Gantenbein, G.; Rzesnicki, T.; Thumm, M.; Jelonnek, J.
    2019. (E. Poli, H. Laqua & J. Oosterbeek, Eds.) The European physical journal / Web of Conferences, 203, 04008. doi:10.1051/epjconf/201920304008
  851. Towards Advanced Fusion Gyrotrons: 2018 Update on Activities within EUROfusion
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K. A.; Bruschi, A.; Chelis, I.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Latsas, G.; Pagonakis, I.; Peponis, D.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Scherer, T.; Schmid, M.; Strauss, D.; Wu, C.; Thumm, M.; Tigelis, I.; Tran, M. Q.; Wilde, F.; Zein, A.
    2019. (E. Poli, H. Laqua & J. Oosterbeek, Eds.) The European physical journal / Web of Conferences, 203, 04007. doi:10.1051/epjconf/201920304007
  852. Antimicrobial propensity of ultrananocrystalline diamond films with embedded silver nanodroplets
    Merker, D.; Popova, B.; Bergfeldt, T.; Weingärtner, T.; Braus, G. H.; Reithmaier, J. P.; Popov, C.
    2019. Diamond and related materials, 93, 168–178. doi:10.1016/j.diamond.2019.02.003
  853. X-ray reflectivity measurements of FeCo / TiN magnetostructures
    Vogt, H.; Jordt, P.; Kress, J.-P.; Wolff, N.; Kienle, L.; Beierle, S.; Magnussen, O. M.; Murphy, B. M.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Oberflächenphysik (2019), Regensburg, Germany, March 31–April 5, 2019
  854. KIT Contribution to the European Gyrotron Development: Pushing High-Power Microwaves towards sub-THz-Frequencies
    Jelonnek, J.; Aiello, G.; Avramidis, K. A.; Brücker, P. T.; Ell, B.; Gantenbein, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kobarg, T.; Leonhardt, W.; Marek, A.; Mellein, D.; Obermaier, M.; Pagonakis, I. G.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauß, D.; Thumm, M.; Weggen, J.; Wu, C.
    2019. French-German THz Conference (2019), Kaiserslautern, Germany, April 2–5, 2019
  855. Loss tangent mapping measurement on large area diamond discs. An approved quality control method
    Meier, A.; Scherer, T.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Kristalline Festkörper und deren Mikrostruktur (2019), Regensburg, Germany, March 31–April 5, 2019
  856. Antibacterial propemsities of UNCD with embedded silver nanodroplets
    Merker, D.; Popova, B.; Weingärtner, T.; Bergfeldt, T.; Braus, G.; Reithmaier, J. P.; Popov, C.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Kristalline Festkörper und deren Mikrostruktur (2019), Regensburg, Germany, March 31–April 5, 2019
  857. Development of kinetic inductance detectors for polarimetric applications in plasma diagnostics
    Mazzocchi, F.; Driessen, E.; Shu, S.; Grossetti, G.; Strauss, D.; Scherer, T.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Kristalline Festkörper und deren Mikrostruktur (2019), Regensburg, Germany, March 31–April 5, 2019
  858. ECRH system development for nuclear fusion reactors: Antenna design and diamond window implementation
    Strauss, D.; Scherer, T.; Schreck, S.; Spaeh, P.; Aiello, G.; Meier, A.; Mazzocchi, F.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Kristalline Festkörper und deren Mikrostruktur (2019), Regensburg, Germany, March 31–April 5, 2019
  859. Development of diamond windows diagnostics for fusion application
    Scherer, T.; Tesniere, A.; Aiello, G.; Mazzocchi, F.; Meier, A.; Schreck, S.; Strauss, D.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Kristalline Festkörper und deren Mikrostruktur (2019), Regensburg, Germany, March 31–April 5, 2019
  860. The ITER diamond window - qualification program development of a safety important component
    Schreck, S.; Aiello, G.; Meier, A.; Scherer, T.; Strauss, D.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Kristalline Festkörper und deren Mikrostruktur (2019), Regensburg, Germany, March 31–April 5, 2019
  861. Corrosion in Iron and Steel T91 Caused by Flowing Lead–Bismuth Eutectic at 400 °C and 10⁻⁷ Mass% Dissolved Oxygen
    Schroer, C.; Tsisar, V.; Durand, A.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2019. Journal of nuclear engineering and radiation science, 5 (1), 011006/1–12. doi:10.1115/1.4040937
  862. Nuclear Fusion (FUSION): Plasma Heating Systems -Microwave Plasma Heating & Current Drive System
    Gantenbein, G.; Avramidis, K.; Franck, J.; Fuchs, M.; Illy, S.; Ioannidis, Z.; Jelonnek, J.; Jin, J.; Kalaria, P.; Kobarg, T.; Lang, R.; Leonhardt, W.; Marschall, M.; Mellein, D.; Meier, A.; Pagonakis, I.; Papenfuß, A.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Scherer, T. A.; Schmid, M.; Strauss, D.; M. Thumm, M.; Wadle, S.; Weggen, J.; Wu, C.; Zein, A.; Kasparek, W.; Lechte, C.; Munk, R.; Plaum, B.; Remppel, F.; Röhlinger, H.; Roth, B.; Schlüter, K. H.; Wolf, S.; Zeitler, A.; Berndt, B.; Braune, H.; Hollmann, F.; Jonitz, L.; Laqua, H.; Marsen, S.; Noke, F.; Preynas, M.; Purps, F.; Reintrog, A.; Schulz, T.; Stange, T.; Uhren, P.; Weißgerber, M.; Wilde, F.
    2019. Annual Report 2017 / Institute for Pulsed Power and Microwave Technology / Institut für Hochleistungsimpuls- und Mikrowellentechnik. ), 1–20, KIT Scientific Publishing. doi:10.5445/IR/1000091705
  863. Synthesis and high-temperature oxidation of ternary carbide coatings on zirconium-based alloy cladding. PhD dissertation
    Tang, C.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000091676
  864. Improvement of impact properties of tungsten by potassium doping
    Nogami, S.; Watanabe, S.; Reiser, J.; Rieth, M.; Sickinger, S.; Hasegawa, A.
    2019. Fusion engineering and design, 140, 48–61. doi:10.1016/j.fusengdes.2019.01.130
  865. Microstructural investigation of an extruded austenitic oxide dispersion strengthened steel containing a carbon-containing process control agent
    Gräning, T.; Rieth, M.; Hoffmann, J.; Seils, S.; Edmondson, P. D.; Möslang, A.
    2019. Journal of nuclear materials, 516, 335–346. doi:10.1016/j.jnucmat.2019.01.048
  866. Molecular dynamics study of two-dimensional discrete breather in nickel
    Bachurina, O. V.; Murzaev, R. T.; Bachurin, D. V.
    2019. Journal of micromechanics and molecular physics, 3 (4), 1950001. doi:10.1142/S2424913019500012
  867. Ultrakurzpulslaserstrukturierung von LiFePO- und LiMnO-Dickschichtelektroden für Lithium-Ionen-Zellen. PhD dissertation
    Mangang, M.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000090826
  868. From W7-X Towards ITER and Beyond: 2019 Status on EU Fusion Gyrotron Developments
    Jelonnek, J.; Aiello, G.; Albajar, F.; Alberti, S.; Avramidis, K. A.; Bertinetti, A.; Brücker, P. T.; Bruschi, A.; Chelis, I.; Dubray, J.; Fanale, F.; Fasel, D.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Genoud, J.; Granucci, G.; Hogge, J.-P.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Laqua, H.; Latsas, G. P.; Leggieri, A.; Legrand, F.; Marchesin, R.; Marek, A.; Marlétaz, B.; Obermaier, M.; Pagonakis, I. G.; Peponis, D. V.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Sanchez, P.; Savoldi, L.; Scherer, T.; Strauss, D.; Thouvenin, P.; Thumm, M.; Tigelis, I.; Tran, M.-Q.; Wilde, F.; Wu, C.; Zisis, A.
    2019. 20th International Vacuum Electronics Conference (IVEC 2019), Busan, South Korea, April 28–May 1, 2019
  869. Skalenübergreifende Simulation von Wasserstoffisotopen auf (0001) Berylliumoberflächen. PhD dissertation
    Stihl, C.
    2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000090436
  870. Relaxation of dislocation structures under ultrasonic influence
    Bachurin, D. V.; Murzaev, R. T.; Nazarov, A. A.
    2019. International journal of solids and structures, 156-157, 1–13. doi:10.1016/j.ijsolstr.2018.06.007
  871. Thermal stability of ternary compounds in the Cu-Li-Sn system and phase transition of the Cu6Sn5 electrode: First-principles calculations and experiment
    Zhang, F.; Liu, S.; Wang, J.; Du, Y.; Zhang, W.; Seifert, H.
    2019. Journal of alloys and compounds, 783, 44–54. doi:10.1016/j.jallcom.2018.12.292
  872. Plastische Verformungsmechanismen in hochgradig kaltgewalzten, ultrafeinkörnigen Wolframblechen. PhD dissertation
    Bonk, S. W.
    2019. KIT Scientific Publishing. doi:10.5445/KSP/1000088290
  873. Thermal management materials based on molybdenum (Mo) and copper (Cu): Elucidation of the rolling-induced evolution of thermo-physical properties (e.g. CTE)
    Reiser, J.; Hoffmann, A.; Hain, J.; Jäntsch, U.; Klimenkov, M.; Hohe, J.; Mrotzek, T.
    2019. Journal of alloys and compounds, 776, 387–416. doi:10.1016/j.jallcom.2018.10.235
  874. The brittle-to-ductile transition in cold rolled tungsten plates: Impact of crystallographic texture, grain size and dislocation density on the transition temperature
    Bonnekoh, C.; Jäntsch, U.; Hoffmann, J.; Leiste, H.; Hartmaier, A.; Weygand, D.; Hoffmann, A.; Reiser, J.
    2019. International journal of refractory metals & hard materials, 78, 146–163. doi:10.1016/j.ijrmhm.2018.09.010
  875. Herstellung, Charakterisierung und Optimierung von austenitischen ODS Stählen. PhD dissertation
    Gräning, T.
    2019. KIT Scientific Publishing. doi:10.5445/KSP/1000075991
  876. Investigations of the hydrogen diffusion and distribution in Zirconium by means of Neutron Imaging = Neutronenradiographie- und -tomographieuntersuchungen der Wasserstoffdiffusion und -verteilung in Zirkonium
    Grosse, M.; Santisteban, J. R.; Bertsch, J.; Schillinger, B.; Kaestner, A.; Daymond, M. R.; Kardjilov, N.
    2018. Kerntechnik, 83 (6), 495–501. doi:10.3139/124.110946
  877. Steel T91 subjected to static stress in lead-bismuth eutectic at 450–550 °C and low oxygen concentration
    Yurechko, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Tsisar, V.; Konys, J.
    2018. Journal of nuclear materials, 512, 423–439. doi:10.1016/j.jnucmat.2018.09.056
  878. ODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloying
    Pazos, D.; Cintins, A.; Castro, V. de; Fernández, P.; Hoffmann, J.; Vargas, W. G.; Leguey, T.; Purans, J.; Anspoks, A.; Kuzmin, A.; Iturriza, I.; Ordás, N.
    2018. Nuclear materials and energy, 17, 1–8. doi:10.1016/j.nme.2018.06.014
  879. Functional Materials in Blankets
    Knitter, R.; Vladimirov, P.
    2018, November 22. 26th European Fusion Programme Workshop (EFPW 2018), Bad Dürkheim, Germany, November 20–23, 2018
  880. Laser materials processing and analytics in battery manufacturing – new design concepts and materials
    Pfleging, W.
    2018, November 13. 5th International Symposium on Laser Interaction with Matter (LIMIS 2018), Changsha, China, November 11–13, 2018
  881. First results of the bundle test QUENCH-19 with FeCrAl claddings
    Stuckert, J.; Große, M.; Laier, J.; Moch, J.; Peters, U.; Stegmaier, U.; Steinbrück, M.; Terrani, K.
    2018, November 13. 24th International QUENCH Workshop (2018), Karlsruhe, Germany, November 13–15, 2018
  882. ITER ECRH Upper Launcher diamond window – Qualification and testing of a Protection Important Component
    Schreck, S.; Aiello, G.; Dieterle, S.; Gagliardi, M.; Meier, A.; Saibene, G.; Scherer, T.; Strauss, D.
    2018. Fusion engineering and design, 136, 472–476. doi:10.1016/j.fusengdes.2018.02.100
  883. Systems engineering perspective to the integration of the heating and current drive system in the EU DEMO: Analysis of requirements and functions
    Grossetti, G.; Brown, R.; Franke, T.; Gafert, J.; Galliara, T.; Jenkins, I.; Mantel, N.; Strauß, D.; Tran, M. Q.; Wenninger, R.
    2018. Fusion engineering and design, 136, 53–57. doi:10.1016/j.fusengdes.2017.12.023
  884. Production of Be-Ti and Be-Zr rods by extrusion and their characterization
    Kurinskiy, P.; Leiste, H.; Goraieb, A.; Rolli, R.; Mueller, S.; Reimann, J.; Moeslang, A.
    2018. Fusion engineering and design, 136, 49–52. doi:10.1016/j.fusengdes.2017.12.022
  885. Ab initio modelling of the initial stages of the ODS particle formation process
    Mastrikov, Y. A.; Sokolov, M. N.; Koch, S.; Zhukovskii, Y. F.; Gopejenko, A.; Vladimirov, P. V.; Borodin, V. A.; Kotomin, E. A.; Möslang, A.
    2018. Nuclear instruments & methods in physics research / B, 435, 70–73. doi:10.1016/j.nimb.2018.01.022
  886. Status of the final design of the EC UPP launcher
    Spaeh, P.; Aiello, G.; Chavan, R.; Gagliardi, M.; Grossetti, G.; Heemskerk, C.; Landis, J.-D.; Meier, A.; Pacheco, J.; Ronden, D.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2018. Fusion engineering and design, 136, 1058–1062. doi:10.1016/j.fusengdes.2018.04.068
  887. Investigation of material homogenisation on the nuclear heating estimates of the electron cyclotron-heating upper launcher blanket shield module
    Weinhorst, B.; Fischer, U.; Spaeh, P.; Strauss, D.
    2018. Fusion engineering and design, 136A, 481–487. doi:10.1016/j.fusengdes.2018.03.002
  888. First Results of the QUENCH-ALISA Bundle Test
    Stuckert, J.; Steinbrueck, M.; Kalilainen, J.; Lind, T.; Zhang, Y.
    2018, October 14. 12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS 2018), Qingdao, China, October 14–18, 2018
  889. Author Correction: Magnetic configuration effects on the Wendelstein 7-X stellarator
    W7-X Team; Dinklage, A.; Beidler, C. D.; Helander, P.; Fuchert, G.; Maaßberg, H.; Rahbarnia, K.; Sunn Pedersen, T.; Turkin, Y.; Wolf, R. C.; Alonso, A.; Andreeva, T.; Blackwell, B.; Bozhenkov, S.; Buttenschön, B.; Czarnecka, A.; Effenberg, F.; Feng, Y.; Geiger, J.; Hirsch, M.; Höfel, U.; Jakubowski, M.; Klinger, T.; Knauer, J.; Kocsis, G.; Krämer-Flecken, A.; Kubkowska, M.; Langenberg, A.; Laqua, H. P.; Marushchenko, N.; Mollén, A.; Neuner, U.; Niemann, H.; Pasch, E.; Pablant, N.; Rudischhauser, L.; Smith, H. M.; Schmitz, O.; Stange, T.; Szepesi, T.; Weir, G.; Windisch, T.; Wurden, G. A.; Zhang, D.; Baumann, K.; Dammertz, G.; Fietz, W. H.; Gantenbein, G.; Huber, M.; Hunger, H.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Losert, M.; Meier, A.; Mellein, D.; Papenfuß, D.; Samartsev, A.; Scherer, T.; Schlaich, A.; Spiess, W.; Thumm, M.; Wadle, S.
    2018. Nature physics, 14 (10), 1067. doi:10.1038/s41567-018-0273-y
  890. Severe accident code-to-code comparison for two accident scenarios in a spent fuel pool
    Coindreau, O.; Jäckel, B.; Rocchi, F.; Alcaro, F.; Angelova, D.; Bandini, G.; Barnak, M.; Behler, M.; Da Cruz, D. F.; Dagan, R.; Drai, P.; Ederli, S.; Herranz, L. E.; Hollands, T.; Horvath, G.; Kaliatka, A.; Kljenak, I.; Kotsuba, O.; Lind, T.; López, C.; Mancheva, K.; Matejovic, P.; Matkovič, M.; Steinbrück, M.; Stempniewicz, M.; Thomas, R.; Vileiniskis, V.; Visser, D. C.; Vokáč, P.; Vorobyov, Y.; Zhabin, O.
    2018. Annals of nuclear energy, 120, 880–887. doi:10.1016/j.anucene.2018.06.043
  891. A review of impact properties of tungsten materials
    Nogami, S.; Watanabe, S.; Reiser, J.; Rieth, M.; Sickinger, S.; Hasegawa, A.
    2018. Fusion engineering and design, 135, 196–203. doi:10.1016/j.fusengdes.2018.08.001
  892. Magnetron-sputtered Al-containing MAX phase carbide thin films and their application as oxidation-resistant coatings
    Tang, C.; Steinbrück, M.; Grosse, M.; Sven Ulrich; Stueber, M.; Seifert, H. J.
    2018, September 28. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018
  893. Calorimetry for thermal runaway prevention of lithium batteries and their materials
    Seifert, H. J.; Ziebert, C.; Rohde, M.; Uhlmann, N.
    2018, September 27. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018
  894. Combined thermal runaway analysis of coin cells with C80 calorimeter and ARC
    Zhao, W.; Ziebert, C.; Uhlmann, N.; Gebert, C.; Rohde, M.; Seifert, H. J.
    2018, September 27. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018
  895. Thermodynamic modelling and experimental investigation of a self-healing SiCf/SiCN CMC
    Markel, I. J.; Glaser, J.; Steinbrück, M.; Seifert, H. J.
    2018, September 27. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018
  896. Experimental analysis of laser post-processing of additive manufactured metallic parts
    Solheid, J. dos S.; Seifert, H. J.; Pfleging, W.
    2018, September 26. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018
  897. Improving BMS and TMS by combined Battery Calorimetry and modelling
    Ziebert, C.; Uhlmann, N.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2018, September 19. Automotive Battery Management Systems (2018), Frankfurt am Main, Germany, September 18–20, 2018
  898. Overview of Recent Gyrotron R&D at KIT in View of the EU DEMO
    Avramidis, K. A.; Aiello, G.; Brucker, P. T.; Gantenbein, G.; George, M.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P. C.; Marek, A.; Pagonakis, I. G.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Wu, C.; Zein, A.; Jelonnek, J.; Franke, T.; Tran, M. Q.
    2018. 43rd International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2018), Nagoya, J, September 9-14, 2018, Article no: 8510364, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2018.8510364
  899. Influence of silicon doping type on the adhesion of seedless electrodeposited copper layers
    Cerqueira Lima, F. G. de; Mescheder, U.; Katona, G. L.; Leiste, H.; Özel, E.; Müller, C.; Reinecke, H.
    2018. Surface and coatings technology, 349, 208–216. doi:10.1016/j.surfcoat.2018.03.044
  900. Comparing roll-to-roll and laser-assisted hot embossing for micro- and nanofabrication
    Habermehl, A.; Rakebrandt, J.-H.; Brenner, P.; Huber, R.; Mertens, A.; Guttmann, M.; Winkler, F.; Pfleging, W.; Eschenbaum, C.; Lemmer, U.
    2018. Nanoengineering: Fabrication, Properties, Optics, and Devices XV, San Diego, CA, August, 19-23, 2018, 13, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2321187
  901. Effect of Structural State and Surface Finishing on Corrosion Behavior of 1.4970 Austenitic Steel at 400 and 500 °C in Flowing Pb-Bi Eutectic With Dissolved Oxygen
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2018. Journal of nuclear engineering and radiation science, 4 (4), 041001. doi:10.1115/1.4040422
  902. Publisher Correction: Magnetic configuration effects on the Wendelstein 7-X stellarator
    W7-X Team; Dinklage, A.; Beidler, C. D.; Helander, P.; Fuchert, G.; Maaßberg, H.; Rahbarnia, K.; Sunn Pedersen, T.; Turkin, Y.; Wolf, R. C.; Alonso, A.; Andreeva, T.; Blackwell, B.; Bozhenkov, S.; Buttenschön, B.; Czarnecka, A.; Effenberg, F.; Feng, Y.; Geiger, J.; Hirsch, M.; Höfel, U.; Jakubowski, M.; Klinger, T.; Knauer, J.; Kocsis, G.; Krämer-Flecken, A.; Kubkowska, M.; Langenberg, A.; Laqua, H. P.; Marushchenko, N.; Mollén, A.; Neuner, U.; Niemann, H.; Pasch, E.; Pablant, N.; Rudischhauser, L.; Smith, H. M.; Schmitz, O.; Stange, T.; Szepesi, T.; Weir, G.; Windisch, T.; Wurden, G. A.; Zhang, D.; Baumann, K.; Dammertz, G.; Fietz, W. H.; Gantenbein, G.; Huber, M.; Hunger, H.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Losert, M.; Meier, A.; Mellein, D.; Papenfuß, D.; Samartsev, A.; Scherer, T.; Schlaich, A.; Spiess, W.; Thumm, M.; Wadle, S.
    2018. Nature physics, 14 (8), 867. doi:10.1038/s41567-018-0215-8
  903. Magnetic configuration effects on the Wendelstein 7-X stellarator
    W7-X Team; Dinklage, A.; Beidler, C. D.; Helander, P.; Fuchert, G.; Maaßberg, H.; Rahbarnia, K.; Sunn Pedersen, T.; Turkin, Y.; Wolf, R. C.; Alonso, A.; Andreeva, T.; Blackwell, B.; Bozhenkov, S.; Buttenschön, B.; Czarnecka, A.; Effenberg, F.; Feng, Y.; Geiger, J.; Hirsch, M.; Höfel, U.; Jakubowski, M.; Klinger, T.; Knauer, J.; Kocsis, G.; Krämer-Flecken, A.; Kubkowska, M.; Langenberg, A.; Laqua, H. P.; Marushchenko, N.; Mollén, A.; Neuner, U.; Niemann, H.; Pasch, E.; Pablant, N.; Rudischhauser, L.; Smith, H. M.; Schmitz, O.; Stange, T.; Szepesi, T.; Weir, G.; Windisch, T.; Wurden, G. A.; Zhang, D.; Baumann, K.; Dammertz, G.; Fietz, W. H.; Gantenbein, G.; Huber, M.; Hunger, H.; Illy, S.; Jelonnek, J.; Kobarg, T.; Lang, R.; Leonhardt, W.; Losert, M.; Meier, A.; Mellein, D.; Papenfuß, D.; Samartsev, A.; Scherer, T.; Schlaich, A.; Spiess, W.; Thumm, M.; Wadle, S.; Weggen, J.
    2018. Nature physics, 14 (8), 855–860. doi:10.1038/s41567-018-0141-9
  904. Long-term corrosion behavior of Al-based coatings in flowing Pb–15.7Li, produced by electrochemical ECX process
    Wulf, S.-E.; Krauss, W.; Konys, J.
    2018. Nuclear materials and energy, 16, 158–162. doi:10.1016/j.nme.2018.06.019
  905. Improvement of EUROFER’s mechanical properties by optimized chemical compositions and thermo-mechanical treatments
    Hoffmann, J.; Rieth, M.; Klimenkov, M.; Baumgärtner, S.
    2018. Nuclear materials and energy, 16, 88–94. doi:10.1016/j.nme.2018.05.028
  906. Long-term thermal stability of two-phased lithium orthosilicate/metatitanate ceramics
    Heuser, J. M.; Kolb, M. H. H.; Bergfeldt, T.; Knitter, R.
    2018. Journal of nuclear materials, 507, 396–402. doi:10.1016/j.jnucmat.2018.05.010
  907. Structure, morphology and selected mechanical properties of magnetron sputtered (Mo, Ta, Nb) thin films on NiTi shape memory alloys
    Seifried, F.; Leiste, H.; Schwaiger, R.; Ulrich, S.; Seifert, H. J.; Stueber, M.
    2018. Surface and coatings technology, 347, 379–389. doi:10.1016/j.surfcoat.2018.05.014
  908. Enabling Large-Area Selective Deposition on Metal-Dielectric Patterns using Polymer Brush Deactivation
    Cummins, C.; Weingärtner, T.; Morris, M. A.
    2018. The journal of physical chemistry <Washington, DC> / C, 122 (26), 14698–14705. doi:10.1021/acs.jpcc.8b04092
  909. Aspects of corrosion of iron- and nickel-based materials by liquid tin: Oxygen dissolved in the melt and saturation with the parent element
    Emmerich, T.; Durand, A.; Tsisar, V.; Schroer, C.
    2018. Materials and corrosion, 69 (7), 832–849. doi:10.1002/maco.201709896
  910. Influence of voids distribution on the deformation behavior of nanocrystalline palladium
    Bachurin, D. V.
    2018. Solid state communications, 275, 43–47. doi:10.1016/j.ssc.2018.03.005
  911. Expanding the operation window of RAFM steels by optimized chemical compositions and heat treatments
    Hoffmann, J.; Rieth, M.; Baumgärtner, S.; Klimenkov, M.; Dürrschnabel, M.
    2018, June 12. 8th Forum on New Materials (CIMTEC 2018), Perugia, Italy, June 10–14, 2018
  912. Molecular Surface Modification of NCM622 Cathode Material Using Organophosphates for Improved Li-Ion Battery Full-Cells
    Neudeck, S.; Walther, F.; Bergfeldt, T.; Suchomski, C.; Rohnke, M.; Hartmann, P.; Janek, J.; Brezesinski, T.
    2018. ACS applied materials & interfaces, 10 (24), 20487–20498. doi:10.1021/acsami.8b04405
  913. Assessing Silicon Carbide Ceramics and Composites for Energy-Related Applications
    Mingazzini, C.; Sauder, C.; Braun, J.; Scafe, M.; Rinaldi, A.; Hansen, K. K.; Steinbrueck, M.
    2018. 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe), Palermo, Italien, 12.06.2018-15.06.2018, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EEEIC.2018.8494444
  914. The Role of Carbon in Grain Refinement of Cast CrFeCoNi High-Entropy Alloys
    Liu, X. W.; Liu, L.; Liu, G.; Wu, X. X.; Lu, D. H.; Yao, J. Q.; Jiang, W. M.; Fan, Z. T.; Zhang, W. B.
    2018. Metallurgical and materials transactions / A, 49 (6), 2151–2160. doi:10.1007/s11661-018-4549-8
  915. Oxide-free aC/Zr0.65 Al0.075 Cu0.275/aC phase plates for transmission electron microscopy
    Dries, M.; Obermair, M.; Hettler, S.; Hermann, P.; Seemann, K.; Seifried, F.; Ulrich, S.; Fischer, R.; Gerthsen, D.
    2018. Ultramicroscopy, 189, 39–45. doi:10.1016/j.ultramic.2018.03.003
  916. Using Battery Calorimetry for Improved Thermal Management and Thermal Runaway Prevention
    Ziebert, C.; Uhlmann, N.; Ouyang, S.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2018, May 17. The Battery Show Europe (2018), Hanover, Germany, May 15–17, 2018
  917. The effect of Ni additions on the oxidation behaviour of Co–Re–Cr high-temperature alloys
    Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
    2018. Materials at High Temperatures, 35 (1-3), 177–186. doi:10.1080/09603409.2017.1392111
  918. Bacterial Adhesion on the Titanium and Stainless-Steel Surfaces Undergone Two Different Treatment Methods: Polishing and Ultrafast Laser Treatment
    Chik, N.; Wan Md Zain, W. S.; Mohamad, A. J.; Sidek, M. Z.; Wan Ibrahim, W. H.; Reif, A.; Rakebrandt, J. H.; Pfleging, W.; Liu, X.
    2018. IOP conference series / Materials science and engineering, 358, Article 012034. doi:10.1088/1757-899X/358/1/012034
  919. EU DEMO EC system preliminary conceptual design
    Garavaglia, S.; Aiello, G.; Alberti, S.; Avramidis, K.; Bruschi, A.; Chelis, I. G.; Franck, J.; Gantenbein, G.; Granucci, G.; Grossetti, G.; Hizanidis, K.; Illy, S.; Jelonnek, J.; Kalaria, P.; Latsas, G.; Moro, A.; Pagonakis, I.; Peponis, D. V.; Poli, E.; Rispoli, N.; Ruess, S.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Tsironis, C.; Wu, C.; Franke, T.; Tran, M. Q.
    2018. Fusion engineering and design, 136, 1173–1177. doi:10.1016/j.fusengdes.2018.04.097
  920. Deposition, characterization and high-temperature steam oxidation behavior of single-phase TiAlC-coated Zircaloy-4
    Tang, C.; Steinbrueck, M.; Stueber, M.; Grosse, M.; Yu, X.; Ulrich, S.; Seifert, H. J.
    2018. Corrosion science, 135, 87–98. doi:10.1016/j.corsci.2018.02.035
  921. Development and qualification of functional materials for the European HCPB TBM
    Zmitko, M.; Vladimirov, P.; Knitter, R.; Kolb, M.; Leys, O.; Heuser, J.; Schneider, H.-C.; Rolli, R.; Chakin, V.; Pupeschi, S.; Magielsen, L.; Fedorov, A.; Poitevin, Y.
    2018. Fusion engineering and design, 136, 1376–1385. doi:10.1016/j.fusengdes.2018.05.014
  922. Determination of very low concentrations of hydrogen in zirconium alloys by neutron imaging
    Buitrago, N. L.; Santisteban, J. R.; Tartaglione, A.; Marín, J.; Barrow, L.; Daymond, M. R.; Schulz, M.; Grosse, M.; Tremsin, A.; Lehmann, E.; Kaestner, A.; Kelleher, J.; Kabra, S.
    2018. Journal of nuclear materials, 503, 98–109. doi:10.1016/j.jnucmat.2018.02.048
  923. Safety Testing using Battery Calorimetry for Thermal Runaway Prevention of Lithium-Ion Batteries
    Ziebert, C.; Uhlmann, N.; Rohde, M.; Seifert, H. J.
    2018, April 11. 10. Batterietagung (2018), Münster, Germany, April 9–11, 2018
  924. Combined Battery Calorimetry and Simulation for Prevention of Thermal Runaway and increased Safety
    Ziebert, C.; Uhlmann, N.; Ouyang, S.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2018, March 28. 35th International Battery Seminar and Exhibit (2018), Ford Lauderdale, March 27–28, 2018
  925. Improvement of the high-temperature oxidation resistance of Zr alloy cladding by surface modification with aluminium-containing ternary carbide coatings
    Tang, C.; Steinbrueck, M.; Grosse, M.; Ulrich, S.; Stueber, M.; Seifert, H. J.
    2018. International Congress on Advances in Nuclear Power Plants: Charlotte, North Carolina, USA, 8-11 April 2018, 694–700, Curran
  926. A thermodynamic investigation of the Li–Sb system
    Beutl, A.; Henriques, D.; Motalov, V.; Cupid, D.; Markus, T.; Flandorfer, H.
    2018. Journal of thermal analysis and calorimetry, 131 (3), 2673–2686. doi:10.1007/s10973-017-6795-1
  927. High-temperature interaction of oxygen-preloaded Zr1Nb alloy with nitrogen
    Steinbrück, M.; Prestel, S.; Gerhards, U.
    2018. Nuclear engineering and technology, 50 (2), 237–245. doi:10.1016/j.net.2017.12.017
  928. In-situ neutron radiography investigations of the reaction of Zircaloy-4 in steam, nitrogen/steam and air/steam atmospheres
    Grosse, M.; Pulvermacher, S.; Steinbrück, M.; Schillinger, B.
    2018. Physica / B, 551, 244–248. doi:10.1016/j.physb.2018.03.030
  929. A Novel Surface Texture Shape for Directional Friction Control
    Lu, P.; Wood, R. J. K.; Gee, M. G.; Wang, L.; Pfleging, W.
    2018. Tribology letters, 66 (1), 51. doi:10.1007/s11249-018-0995-0
  930. Thermodynamic investigations in the Al-Fe system : Heat capacity measurements of three intermetallic phases
    Rank, M.; Gotcu, P.; Franke, P.; Seifert, H. J.
    2018. Intermetallics, 94, 73–82. doi:10.1016/j.intermet.2017.12.015
  931. Phenomenology of BWR fuel assembly degradation
    Kurata, M.; Barrachin, M.; Haste, T.; Steinbrück, M.
    2018. Journal of nuclear materials, 500, 119–140. doi:10.1016/j.jnucmat.2017.12.004
  932. TEM characterization on new 9% Cr advanced steels thermomechanical treated after tempering
    Fernández, P.; Hoffmann, J.; Rieth, M.; Roldán, M.; Gómez-Herrero, A.
    2018. Journal of nuclear materials, 500, 1–10. doi:10.1016/j.jnucmat.2017.12.025
  933. Laser in battery manufacturing: impact of intrinsic and artificial electrode porosity on chemical degradation and battery lifetime
    Smyrek, P.; Zheng, Y.; Seifert, H. J.; Pfleging, W.
    2018. U. Klotzbach, K. Washio & R. Kling (Eds.), Laser-based Micro- and Nanoprocessing XII, San Francisco, United States, 27 January–1 February 2018, 47 S., Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2288440
  934. Laser micro structuring of composite Li (Ni0.6Mn0.2Co0.2) O2cathode layersfor lithium-ion batteries
    Rakebrandt, J.-H.; Smyrek, P.; Zheng, Y.; Seifert, H. J.; Pfleging, W.
    2018. 2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), Shanghai, China, 7–11 August 2017, 57–60, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2017.8286297
  935. Laser-induced breakdown spectroscopy for studying the electrochemical impact of porosity variations in composite electrode materials
    Smyrek, P.; Zheng, Y.; Rakebrandt, J. H.; Seifert, H. J.; Pfleging, W.
    2018. The 7th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale : IEEE 3M-NANO 2017 : Shanghai, China, 7-11 August 2017 / 3M-NANO 2017, 65–68, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2017.8286301
  936. The brittle-to-ductile transition in cold rolled tungsten : On the decrease of the brittle-to-ductile transition by 600 K to - 65 °C
    Bonnekoh, C.; Hoffmann, A.; Reiser, J.
    2018. International journal of refractory metals & hard materials, 71, 181–189. doi:10.1016/j.ijrmhm.2017.11.017
  937. Battery Calorimetry of Li-Ion Cells to Prevent Thermal Runaway and Develop Safer Cells
    Ziebert, C.; Uhlmann, N.; Ouyang, S.; Lei, B.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2018, January 29. 8th Advanced Automotive Battery Conference (AABC 2018), Mainz, Germany, January 29–February 1, 2018
  938. Thermisches Verhalten von Lithium-Ionen-Batterien
    Ziebert, C.; Rohde, M.; Seifert, H. J.
    2018, January 25. Batterieforum Deutschland (2018), Berlin, Germany, January 24–26, 2018
  939. Atom probe tomography of the evolution of the nanostructure of oxide dispersion strengthened steels under ion irradiation
    Orlov, N. N.; Rogozhkin, S. V.; Bogachev, A. A.; Korchuganova, O. A.; Nikitin, A. A.; Zaluzhnyi, A. G.; Kozodaev, M. A.; Kulevoy, T. V.; Kuibeda, R. P.; Fedin, P. A.; Chalykh, B. B.; Lindau, R.; Hoffmann, J.; Möslang, A.; Vladimirov, P.
    2018. Russian metallurgy (metally), 2017 (9), 741–747. doi:10.1134/S0036029517090105
  940. Influence of σ Phase on the Allotropic Transformation of the Matrix in Co-Re-Cr-Based Alloys with Ni Addition
    Dörries, K.; Mukherji, D.; Rösler, J.; Esleben, K.; Gorr, B.; Christ, H.-J.
    2018. Metals, 8 (9), Artkl.Nr.: 706. doi:10.3390/met8090706
  941. Design evolution of the diamond window unit for the ITER EC H&CD upper launcher
    Aiello, G.; Casal, N.; Gagliardi, M.; Goodman, T.; Henderson, M.; Meier, A.; Saibene, G.; Scherer, T.; Schreck, S.; Strauss, D.
    2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
  942. Diamond window technology for EC heating and current drive: state of the art
    Aiello, G.; Scherer, T.; Avramidis, K.; Casal, N.; Franke, T.; Gagliardi, M.; Ganbeinbein, G.; Henderson, M.; Jelonnek, J.; Meier, A.; Saibene, G.; Schreck, S.; Strauss, D.; Thumm, M.; Tran, M. Q.; Wild, C.; Woerner, E.
    2018. 23rd Topical Meeting on the Technology of Fusion Energy (TOFE 2018), Orlando, FL, USA, November 11–15, 2018
  943. Characterization of helium and tritium filled bubbles in irradiated beryllium
    Klimenkov, ..; Hoffmann, ..; Vladimirov, P.; Chakin, V.; Möslang, A.
    2018. 19th International Microscopy Congress (IMC 2018), Sydney, Australia, September 9–14, 2018
  944. Development of an electrochemical sensor for hydrogen detection in liquid lithium for IFMIF-DONES
    Holstein, N.; Krauss, W.; Konys, J.; Nitti, F. S.
    2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
  945. Precipitation phenomena during corrosion testing in forced-convection Pb-15.7Li loop PICOLO
    Krauss, W.; Wulf, S.-E.; Lorenz, J.; Konys, J.
    2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
  946. Electrochemical techniques as innovative tools for fabricating divertor and blanket components in fusion technology
    Wulf, S.-E.; Lorenz, J.; Holstein, N.; Krauss, W.
    2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
  947. IAEA FUMAC Benchmark on the Halden, Studisvik and QUENCH-L1 LOCA tests
    Pizzocri, D.; Bouloré, A.; Stuckert, J.; Van Uffelen, P.; Wiesenack, W.; Zhang, J.
    2018. TOPFUEL Reactor Fuel Performance, Prag, Czech Republic, 30 September - 04 October 2018, Paper A0222, ENS/TOPFUEL
  948. IAEA FUMAC Benchmark on KIT Bundle Test CORA-15
    Stuckert, J.; Austregesilo, H.; Hollands, T. H.; Kiselev, A.
    2018. TOPFUEL Reactor Fuel Performance, Prag, Czech Republic, 30 September - 04 October 2018, Paper A0202/1–16, ENS / TOPFUEL
  949. FUMAC: IAEA’s Coordinated Research Project on Fuel Modelling in Accident Conditions
    Veshchunov, M.; Stuckert, J.; Van Uffelen, P.; Wiesenack, W.; Zhang, J.
    2018. TOPFUEL Reactor Fuel Performance, Prag, Czech Republic, 30 September - 04 October 2018, Paper A0198, ENS / TOPFUEL
  950. Influence of Substrate Misorientation on the Composition and the Structural and Photoluminescence Properties of Epitaxial Layers Grown on GaAs(100)
    Seredin, P. V.; Lenshin, A. S.; Fedyukin, A. V.; Arsentyev, I. N.; Zhabotinsky, A. V.; Nikolaev, D. N.; Leiste, H.; Rinke, M.
    2018. Semiconductors, 52 (1), 112–117. doi:10.1134/S1063782618010207
  951. Shallow Talk about Integrated Computational Materials Engineering and Materials Genome Initiative: Ideas and Practice
    Li, B.; Du, Y.; Qiu, L.; Pang, M.; Zhang, W.; Liu, S.; Li, K.; Peng, Y.; Zhou, P.; Zheng, Z.; Song, M.; Seifert, H.
    2018. Zhong guo cai liao jin zhan, 37 (7), 506–525. doi:10.7502/j.issn.1674-3962.2018.07.03
  952. Development of Laser Structured Silicon-based Anodes for Lithium-ion Batteries
    Zheng, Y.; Seifert, H. J.; Smyrek, P.; Pfleging, W.
    2018. 8th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2018; Hangzhou; China; 13 August 2018 through 17 August 2018. Ed.: M. Yu, 6–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2018.8552232
  953. Liquid Metals – a Promising Heat Transfer Media for CSP – Overview on KIT Research
    Weisenburger, A.; Hering, W.; Onea, A.; Pacio, J.; Schroer, C.; Wetzel, T.; Stieglitz, R.; Müller, G.
    2018. SolarPACES (2018), Casablanca, Morocco, October 2–5, 2018
  954. THZ QCL/KID based polarimeter for plasma diagnostics
    Mazzocchi, F.; Driessen, E. F. C.; Shu, S.; Grossetti, G.; Strauß, D.; Scherer, T.
    2018. US-EU-Japan RF Heating Technology Workshop and US-Japan Workshop on RF Heating Physics (2018), Shizuoka, Japan, September 4–7, 2018
  955. Investigation of detector concepts in fusion diagnostics from GHz to THz frequencies
    Scherer, T. A.; Mazzocchi, F.; Grossetti, G.; Strauss, D.
    2018. US-EU-Japan RF Heating Technology Workshop and US-Japan Workshop on RF Heating Physics (2018), Shizuoka, Japan, September 4–7, 2018
  956. Present status of the ITER EC Upper Launcher integration
    Späh, P.; Aiello, G.; Schreck, S.; Scherer, T.; Strauss, D.; Weinhorst, B.
    2018. 30th Joint Russian-German Meeting on ECRH and Gyrotrons (2018), Gorodets, Russia, June 17–24, 2018
  957. Recent Developments of Diamond ITER-Torus-windows and large size Brewster-windows
    Scherer, T.
    2018. 30th Joint Russian-German Meeting on ECRH and Gyrotrons (2018), Gorodets, Russia, June 17–24, 2018
  958. Diamond Brewster windows for microwave transmission
    Scherer, T.; Aiello, G.; Strauss, D.
    2018. 12th International New Diamond and Nano Carbons Conference (NDNC 2018), Flagstaff, AZ, USA, May 20–24, 2018
  959. The 8 MW dual-frequency ECRH system of ASDEX Upgrade
    Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Wagner, D.; Bock, A.; Burckhart, A.; Geiger, B.; Herrmann, A.; Rittich, D.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Malygin, V.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Usachev, S.
    2018. 20th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (2018), Greifswald, Germany, May 14–17, 2018
  960. Diamond Window Diagnostics For Fusion Applications
    Mazzocchi, F.; Aiello, G.; Strauss, D.; Meier, A.; Scherer, T.
    2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018
  961. Experimental activity in Karlsruhe Institute of Technology towards corrosion performance of steels in Pb-Bi eutectic
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2018. Materials Irradiation Research Meeting in the 30th Fiscal Year: Nuclear materials and their lifetime evaluation (2018), Kyoto, Japan, November 27–28, 2018
  962. Corrosion in aluminium-alloyed austenitic steel caused by static lead-bismuth eutectic: Effect of dissolved oxygen concentration after exposure for 1000 h at 550⁰C
    Tsisar, V.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Schroer, C.
    2018. GEMMA AFA Workshop (2018), Karlsruhe, Germany, November 28, 2018
  963. Corrosion caused by liquid lead or lead alloys - overview
    Schroer, C.
    2018. GEMMA AFA Workshop (2018), Karlsruhe, Germany, November 28, 2018
  964. Effect of oxygen concentration in static Pb at 700⁰C and Pb-Bi eutectic at 550⁰C on corrosion behavior of aluminium-alloyed austenitic steels
    Tsisar, V.; Schroer, C.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2018. 14th International Workshop on Spallation Materials Technology (IWSMT 2018), Fukushima, Japan, November 11–16, 2018
  965. Update of the QUENCH program
    Steinbrueck, M.; Stuckert, J.; Grosse, M.
    2018. 24th International QUENCH Workshop (2018), Karlsruhe, Germany, November 13–15, 2018
  966. Comparative high-temperature oxidation tests with Zircaloy-4 in various atmospheres
    Steinbrück, M.; Van Appeldorn, P.
    2018. Proceedings of TOPFUEL Reactor Fuel Performance 2018, Prag, Tschechien, 30.09.2018-04.10.2018
  967. Modeling and simulation of the QUENCH 12 experiment with the RELAP/SCDAPSIM/MOD3.5 code
    Gerova, G.; Spasov, I.; Allison, C.; Steinbrück, M.
    2018. 44th International Conference on Applications of Mathematics in Engineering and Economics (2018), Sozopol, Bulgaria, 08.06.2018 - 13.06.2018, 020019, American Institute of Physics (AIP). doi:10.1063/1.5082037
  968. Results of the QUENCH-DEBRIS (QUENCH-17) test with strongly oxidized Zircaloy-4 and Hafnium claddings filled with segmented pellet simulators
    Stuckert, J.; Große, M.; Onel, Y.; Rössger, C.; Stegmaier, U.; Steinbrück, M.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000088591
  969. Master curve fracture toughness characterization of EuroFer97 using miniature multi-notch bend bar specimens for fusion applications1
    Chen, X.; Sokolov, M. A.; Katoh, Y.; Rieth, M.; Clowers, L. N.
    2018. ASME 2018 Pressure Vessels and Piping Conference, PVP 2018; Prague; Czech Republic; 15 July 2018 through 20 July 2018, V01AT01A076, The American Society of Mechanical Engineers (ASME). doi:10.1115/PVP2018-85065
  970. The Multi-Frequency ECRH System at ASDEX Upgrade - Current Status and Plans -
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Munich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Malygin, V.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.
    2018. 43rd International Conference on Infrared Millimeter and Terahertz Waves, IRMMW-THz 2018; Nagoya Congress Center (NCC)Nagoya; Japan; 9 September 2018 through 14 September 2018, Art. Nr.: 8510057, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2018.8510057
  971. Development of NbN polarization sensitive KID for Fusion Applications
    Mazzocchi, F.; Driessen, E. F. C.; Shu, S.; Grossetti, G.; Straub, D.; Scherer, T.
    2018. 43rd International Conference on Infrared Millimeter and Terahertz Waves, IRMMW-THz 2018; Nagoya Congress Center (NCC)Nagoya; Japan; 9 September 2018 through 14 September 2018, Art. Nr.: 8510114, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2018.8510114
  972. 24th International QUENCH Workshop : 13-15 November 2018, Karlsruhe Institute of Technology, Karlsruhe, Germany
    Steinbrück, M. (Ed.)
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000088229
  973. Ignition in ternary Ru/Al-based reactive multilayers - Effects of chemistry and stacking sequence
    Pauly, C.; Woll, K.; Gallino, I.; Stüber, M.; Leiste, H.; Busch, R.; Mücklich, F.
    2018. Journal of applied physics, 124 (19), 195301/1–9. doi:10.1063/1.5046452
  974. Annealing-induced grain rotation in ultrafine-grained aluminum alloy
    Danilenko, V. N.; Bachurin, D. V.; Nazarov, A. A.
    2018. Reviews on advanced materials science, 55 (1-2), 69–77
  975. Research on the methods for the mass production of multi-scale organs-on-chips
    Lantada, A. D.; Pfleging, W.; Besser, H.; Guttmann, M.; Wissmann, M.; Plewa, K.; Smyrek, P.; Piotter, V.; García-Ruíz, J. P.
    2018. Polymers, 10 (11), Art. Nr.: 1238. doi:10.3390/polym10111238
  976. First Results of the QUENCH-ALISA Bundle Test
    Stuckert, J.; Steinbrueck, M.; Kalilainen, J.; Lind, T.; Zhang, Y.
    2018. 12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-12), Quingdao, China, 14 - 18 October 2018, Paper 918
  977. Influence of grain boundary misorientation on intergranular fracture of nanocrystalline palladium
    Bachurin, D. V.
    2018. International journal of fracture, 214 (1), 69–78. doi:10.1007/s10704-018-0319-2
  978. Plastische Verformungsmechanismen in hochgradig kaltgewalzten, ultrafeinkörnigen Wolframblechen. PhD dissertation
    Bonk, S. W.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000086974
  979. Fabrication of nanostructured polymers by laser-assisted hot embossing for biological and optical applications
    Rakebrandt, J.-H.; Besser, H.; Habermehl, A.; Guttmann, M.; Wissmann, M.; Eschenbaum, C.; Lemmer, U.; Seifert, H. J.; Pfleging, W.
    2018. Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, Venice, I, June 4-8, 2018, 289–290, European Society for Precision Engineering and Nanotechnology (euspen)
  980. 2018 Status on KIT Gyrotron Activities
    Jelonnek, J.; Aiello, G.; Avramidis, K.; Gantenbein, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Marek, A.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Wilde, F.; Wu, C.; Zein, A.
    2018. 30th Joint Russian-German Meeting on ECRH and Gyrotrons, IAP RAS, Nizhny Novgorod, RUS, June 17-24, 2018. Ed.: V. E. Zapevalov, Article-no 01009, EDP Sciences. doi:10.1051/epjconf/201818701009
  981. Diffusion multiple study of Co-Ni-Ti system at 1073 K
    Yuan, Y.; Yang, L.; Li, D.; Tang, A.; Pan, F.; Seifert, H.; Moelans, N.
    2018. Calphad, 63, 156–163. doi:10.1016/j.calphad.2018.09.007
  982. Influence of composition and heating schedules on compatibility of FeCrAl alloys with high-temperature steam
    Tang, C.; Jianu, A.; Steinbrueck, M.; Grosse, M.; Weisenburger, A.; Seifert, H. J.
    2018. Journal of nuclear materials, 511, 496–507. doi:10.1016/j.jnucmat.2018.09.026
  983. A Study of the Factors Influencing Generated Surface Roughness of Downfacing Surfaces in Selective Laser Melting
    Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
    2018. World Congress on Micro and Nano Manufacturing, Portoroz, SLO, September 18-20, 2018, 327–330, Research Publishing. doi:10.3850/978-981-11-2728-1_57
  984. A study of the factors influencing generated surface roughness of downfacing surfaces in selective laser melting
    Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
    2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slovenia, September 17–20, 2018
  985. Phosphate based ceramic as solid-state electrolyte for lithium ion batteries. PhD dissertation
    Cui, Y.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000086671
  986. Summary of the QUENCH-LOCA : Experimental Program
    Wensauer, A.; Große, M.; Walter, M.; Stuckert, J.; Steinbrück, M.
    2018. 49/49th Jahrestagung Kerntechnik / 49th Annual Meeting on Nuclear Technology (AMNT 2018), Berlin, Germany, May 29–30, 2018
  987. Effect of heat treatment of titanium beryllide on tritium/hydrogen release
    Chakin, V.; Rolli, R.; Gaisin, R.; Kurinskiy, P.; Kim, J.-H.; Nakamichi, M.
    2018. Fusion engineering and design, 137, 165–171. doi:10.1016/j.fusengdes.2018.09.005
  988. The brittle-to-ductile transition in cold rolled tungsten: Low-temperature toughness opens a new era in industrial application of tungsten
    Bonnekoh, C.; Leiste, H.; Hoffmann, J.; Jäntsch, U.; Hoffmann, A.; Reiser, J.
    2018. Materials Science and Engineering Congress (MSE 2018), Darmstadt, Germany, September 26–28, 2018
  989. Heat capacities and an updated thermodynamic model for the Li-Sn system
    Reichmann, T. L.; Li, D.; Cupid, D. M.
    2018. Physical Chemistry Chemical Physics, 20 (35), 22856–22866. doi:10.1039/c8cp04205e
  990. Why Do secondary cracks preferentially form in hot-rolled ODS steels in comparison with hot-extruded ODS steels?
    Das, A.; Viehrig, H.-W.; Altstadt, E.; Bergner, F.; Hoffmann, J.
    2018. Crystals, 8 (8), 306. doi:10.3390/cryst8080306
  991. Ab initio modelling of the Y, O, and Ti solute interaction in fcc-Fe matrix
    Gopejenko, A.; Mastrikov, Y. A.; Zhukovskii, Y. F.; Kotomin, E. A.; Vladimirov, P.; Möslang, A.
    2018. Nuclear instruments & methods in physics research / B, 433, 106–110. doi:10.1016/j.nimb.2018.07.033
  992. The design and thermo-structural analysis of target assembly for high intensity neutron source
    Wakai, E.; Watanabe, K.; Kondo, H.; Gröschel, F.
    2018. Nuclear materials and energy, 17, 15–23. doi:10.1016/j.nme.2018.07.005
  993. Laser surface modification and polishing of additive manufactured metallic parts
    Dos Santos Solheid, J.; Seifert, H. J.; Pfleging, W.
    2018. Procedia CIRP, 74, 280–284. doi:10.1016/j.procir.2018.08.111
  994. Laser-assisted post-processing of additive manufactured metallic parts
    Dos Santos Solheid, J.; Seifert, H. J.; Pfleging, W.
    2018. Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, Venice, I, June 4-8, 2018. Ed.: D. Billington, 275–276, European Society for Precision Engineering and Nanotechnology (euspen)
  995. 2018 Status of Gyrotron R&D for W7-X, TCV, ITER and EU DEMO within Europe
    Jelonnek, J.; Aiello, G.; Albajar, F.; Alberti, S.; Avramidis, K. A.; Bonicelli, T.; Bruschi, A.; Chelis, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Hogge, J.-P.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P. C.; Laqua, H. P.; Latsas, G. P.; Pagonakis, I. G.; Peponis, D. V.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Sanchez, P.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Tigelis, I.; Tran, M. Q.; Wilde, F.; Wu, C.
    2018. US-EU-Japan RF Heating Technology Workshop and US-Japan Workshop on RF Heating Physics (2018), Shizuoka, Japan, September 4–7, 2018
  996. Materialwissenschaftliche Aspekte der Methanzersetzung in flüssigem Zinn. PhD dissertation
    Emmerich, T. M.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000085460
  997. Influence of internal stresses on deformation behavior of nanocrystalline palladium
    Bachurin, D. V.
    2018. Materials science and engineering / A, 734, 255–259. doi:10.1016/j.msea.2018.07.095
  998. Planned material irradiation capabilities of IFMIF-DONES
    Arbeiter, F.; Diegele, E.; Fischer, U.; Santamaria Garcia, A.; Ibarra, A.; Molla, J.; Mota, F.; Möslang, A.; Qiu, Y.; Serrano, M.; Schwab, F.
    2018. Nuclear materials and energy, 16, 245–248. doi:10.1016/j.nme.2018.05.026
  999. Erste Versuchsergebnisse aus der Entwicklung eines Dünnschichtsensors zur Messung der Temperatur im tribologischen Kontakt unter Mischreibung
    Wantzen, K.; Pavlides, C.; Poltorak, C.; Ulrich, S.; Albers, A.
    2018. 20./17. Arbeitstagung Angewandte Oberflächenanalytik / Jahrestagung der DVG e.V. Kaiserslautern (AOFA 2018), Kaiserslautern, Germany, September 3–5, 2018
  1000. Investigation and modeling of the degradation of zirconium-based fuel cladding during corrosion in steam and air-steam mixtures at high temperatures
    Haurais, F.; Beuzet, É.; Steinbrück, M.; Simoni, É.; Ambard, A.; Torkhani, M.
    2018. 18th International Symposium on Zirconium in the Nuclear Industry; Hilton Head; United States; 15 May 2016 through 19 May 2016, 1039–1058, ASTM International. doi:10.1520/STP1S9720160033
  1001. Determinación de bajas concentraciones de hidrógeno en aleaciones de circonio utilizando radiografía de neutrones como técnica no destructiva
    Buitrago, N. L.; Santisteban, J.; Marín, J.; Tartaglione, A.; Daymond, M.; Grosse, M.
    2018. Revista matéria, 23 (2), e-12105. doi:10.1590/S1517-707620180002.0439
  1002. Effect of oxygen concentration in static Pb-Bi eutectic on corrosion behavior of aluminum-alloyed austenitic steels at 550⁰C for 1000 h
    Tsisar Valentyn; Schroer, C.; Zhou, Z.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2018. 26th International Conference on Nuclear Engineering (ICONE 2018), London, United Kingdom, July 22–28, 2018
  1003. Practical experience gained from operating the lead-bismuth loop corrida
    Schroer, C.; Wedemeyer, O.; Tsisar Valentyn; Skrypnik, A.; Konys, J.
    2018. 26th International Conference on Nuclear Engineering (ICONE 2018), London, United Kingdom, July 22–28, 2018
  1004. Optical properties of radio-frequency magnetron sputtered α-(Cr1-xAlx)2O3 thin films grown on α-Al2O3 substrates at different temperatures
    Gao, Y.; Leiste, H.; Heissler, S.; Ulrich, S.; Stueber, M.
    2018. Thin solid films, 660, 439–446. doi:10.1016/j.tsf.2018.06.053
  1005. Ab initio study of Be and Be12Ti for fusion applications
    Bachurin, D. V.; Vladimirov, P. V.
    2018. Intermetallics, 100, 163–170. doi:10.1016/j.intermet.2018.06.009
  1006. ECM Models for Li-Ion Batteries – A Short Mathematical Survey and Simulations
    Melcher, A.; Ziebert, C.; Rohde, M.; Lei, B.; Seifert, H. J.
    2018. Ideen und Innovationen für die Energie von morgen : Wissenschaftliche Beiträge des KIT zu den Jahrestagungen 2014, 2016 und 2017 des KIT-Zentrums Energie. Hrsg.: W. Breh, 53–58, KIT Scientific Publishing. doi:10.5445/IR/1000084916
  1007. Experimental Analysis of Thermal Runaway in 18650 Cylindrical Li-Ion Cells using an Accelerating Rate Calorimeter
    Lei, B.; Zhao, W.; Ziebert, C.; Melcher, A.; Rohde, M.; Seifert, H. J.
    2018. Ideen und Innovationen für die Energie von morgen : Wissenschaftliche Beiträge des KIT zu den Jahrestagungen 2014, 2016 und 2017 des KIT-Zentrums Energie. Hrsg.: W. Breh, 45–52, KIT Scientific Publishing. doi:10.5445/IR/1000084915
  1008. Electrochemical-calorimetric studies on different lithium-ion cells
    Lei, B.; Melcher, A.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2018. Ideen und Innovationen für die Energie von morgen : Wissenschaftliche Beiträge des KIT zu den Jahrestagungen 2014, 2016 und 2017 des KIT-Zentrums Energie. Ed.: W. Breh, 9–16, KIT Scientific Publishing. doi:10.5445/IR/1000084899
  1009. 3D structural analysis of selected high- temperature materials. 3D Gefüge-Analyse von ausgewählten Hochtemperaturwerkstoffen
    Jäntsch, U.; Klimenkov, M.; Möslang, A.; Reinauer, F.; Reiser, J.; Rieth, M.
    2018. Praktische Metallographie, 55 (7), 424–446. doi:10.3139/147.110525
  1010. Evaluation of conservative and innovative manufacturing routes for gas cooled Test Blanket Module and Breeder Blanket First Walls
    Neuberger, H.; Rey, J.; Hernandez, F.; Ruck, S.; Arbeiter, F.; Rieth, M.; Koehly, C.; Stratil, L.; Niewoehner, R.; Felde, A.
    2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
  1011. Silicon-based 3D electrodes for high power lithium-ion battery
    Zheng, Y.; Smyrek, P.; Rakebrandt, J.-H.; Seifert, H. J.; Pfleging, W.; Kubel, C.
    2018. The 7th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale : IEEE 3M-NANO 2017 : Shanghai, China, 7-11 August 2017 / 3M-NANO 2017, 61–64, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2017.8286308
  1012. Overview of the HCPB research activities in EUROfusion
    Hernandez, F. A.; Arbeiter, F.; Boccaccini, L. V.; Bubelis, E.; Chakin, V. P.; Cristescu, I.; Ghidersa, B. E.; Gonzalez, M.; Hering, W.; Hernandez, T.; Jin, X. Z.; Kamlah, M.; Kiss, B.; Knitter, R.; Kolb, M. H. H.; Kurinskiy, P.; Leys, O.; Maione, I. A.; Moscardini, M.; Nadasi, G.; Neuberger, H.; Pereslavtsev, P.; Pupeschi, S.; Rolli, R.; Ruck, S.; Spagnuolo, G. A.; Vladimirov, P. V.; Zeile, C.; Zhou, G.
    2018. IEEE transactions on plasma science, 46 (9), 2247–2261. doi:10.1109/TPS.2018.2830813
  1013. Results of the LOCA bundle test QUENCH-L5 with pre-hydrogenated optimised ZIRLO™ claddings (SR-7738)
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083098
  1014. Results of the LOCA bundle test QUENCH-L4 with pre-hydrogenated M5® claddings (SR-7712)
    Stuckert, J.; Große, M.; Pshenichnikov, A.; Rössger, C.; Steinbrück, M.; Walter, M.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083094
  1015. Results of the LOCA bundle test QUENCH-L3 with optimised ZIRLO™ claddings (SR-7737)
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083087
  1016. Results of the LOCA bundle test QUENCH-L2 with M5® claddings (SR-7677)
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083069
  1017. Results of the LOCA reference bundle test QUENCH-L1 with Zircaloy-4 claddings (SR-7651)
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083067
  1018. In Situ Investigations of the Hydrogen Uptake of Zirconium Alloys during Steam Oxidation
    Grosse, M.; Steinbrueck, M.; Schillinger, B.; Kaestner, A.
    2018. Zirconium in the Nuclear Industry: 18th International Symposium, Hilton Head Island, SC, USA, May 15 - 19, 2016. Ed.: R. Comstock, 1114–1135, ASTM International. doi:10.1520/STP159720160041
  1019. Characterization of Nanoparticle Batch-To-Batch Variability
    Mülhopt, S.; Diabaté, S.; Dilger, M.; Adelhelm, C.; Anderlohr, C.; Bergfeldt, T.; Gómez de la Torre, J.; Jiang, Y.; Valsami-Jones, E.; Langevin, D.; Lynch, I.; Mahon, E.; Nelissen, I.; Piella, J.; Puntes, V.; Ray, S.; Schneider, R.; Wilkins, T.; Weiss, C.; Paur, H.-R.
    2018. Nanomaterials, 8 (5), Article: 311. doi:10.3390/nano8050311
  1020. Phase stability of a ductile single-phase BCC HfNbTaTiZr refractory high-entropy alloy
    Yao, J. Q.; Liu, X. W.; Gao, N.; Jiang, Q. H.; Li, N.; Liu, G.; Zhang, W. B.; Fan, Z. T.
    2018. Intermetallics, 98, 79–88. doi:10.1016/j.intermet.2018.04.023
  1021. High-Throughput Description of Infinite Composition-Structure-Property-Performance Relationships of Lithium-Manganese Oxide Spinel Cathodes
    Zhang, W. B.; Cupid, D. M.; Gotcu, P.; Chang, K.; Li, D.; Du, Y.; Seifert, H. J.
    2018. Chemistry of materials, 30 (7), 2287–2298. doi:10.1021/acs.chemmater.7b05068
  1022. Assessment of atomic mobilities for fcc Co–Ti–V alloys
    Zhang, J.; Du, Y.; Liu, Y.; Zhang, W.; Liu, D.; Chen, C.
    2018. Calphad, 61, 179–188. doi:10.1016/j.calphad.2018.04.002
  1023. Review of the Innovative H&CD Designs and the Impact of Their Configurations on the Performance of the EU DEMO Fusion Power Plant Reactor
    Franke, T.; Agostinetti, P.; Aiello, G.; Avramidis, K.; Bachmann, C.; Bruschi, A.; Federici, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Noterdaeme, J.-M.; Simonin, A.; Scherer, T.; Sonato, P.; Strauss, D.; Tran, M. Q.; Valentine, A.; Vincenzi, P.; Wenninger, R.; Zheng, S.
    2018. IEEE transactions on plasma science, 46 (5), 1633–1640. doi:10.1109/TPS.2018.2800405
  1024. Experimental studies on tungsten produced by powder injection moulding as plasma-facing materials
    Krug, R.; Unterberg, B.; Antusch, S.; Bähner, J.-P.; Coenen, J. W.; Kaufmann, C.; Kreter, A.; Martinova, Y.; Möller, S.; Pintsuk, G.; Rasinski, M.; Rieth, M.; Wirtz, M.; Linsmeier, C.
    2018. 82. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Atome, Moleküle, Quantenoptik und Plasmen, Fachverband Quantenoptik und Photonik (SAMOP 2018), Erlangen, Germany, March 4–9, 2018
  1025. Overview of recent gyrotron R&D towards DEMO within EUROfusion work package heating and current drive
    Avramidis, K. A.; Aiello, G.; Alberti, S.; Brücker, P. T.; Bruschi, A.; Chelis, I.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Genoud, J.; Geroge, M.; Granucci, G.; Grossetti, G.; Hogge, J. P.; Illy, S.; Ioannidis, Z. C.; Jelonnek, J.; Jin, J.; Kalaria, P. C.; Latsas, G. P.; Marek, A.; Pagonakis, I. G.; Peponis, D. V.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Tigelis, I.; Tran, M. Q.; Wu, C.; Zein, A.; Zisis, A.
    2018. 27th IAEA Fusion Energy Conference (FEC 2018), Gāndhināgar, India, October 22–27, 2018
  1026. Overview of recent gyrotron R&D at KIT in view of the EU DEMO
    Avramidis, K. A.; Aiello, G.; Brücker, P. T.; Franke, T.; Gantenbein, G.; George, M.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P. C.; Marek, A.; Pagonakis, I. G.; Ruess, S.; Ruess, T.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Tran, M. Q.; Wu, C.; Zein, A.; Jelonnek, J.
    2018. 43rd International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2018), Nagoya, Japan, September 9–14, 2018
  1027. H₂ permeation behavior of Cr₂AlC and Ti₂AlC max phase coated zircaloy-4 by neutron radiography
    Tang, C.; Grosse, M.; Trtik, P.; Steinbrueck, M.; Stueber, M.; Seifert, H. J.
    2018. Acta polytechnica, 58 (1), 69–76. doi:10.14311/AP.2018.58.0069
  1028. Torus diamond window for ITER - R&D and qualification activities for a protection important component
    Schreck, S.; Aiello, G.; Dieterle, S.; Meier, A.; Strauss, D.; Scherer, T.
    2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018
  1029. Mechanical load study on diamond window mock-up
    Meier, A.; Scherer, T.; Aiello, G.; Grossetti, G.; Mazzocchi, F.; Schreck, S.; Strauss, D.
    2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018
  1030. Influence of WC-Co on the high-frequency properties of soft ferromagnetic Fe-Co-Hf-N films used for sensor application
    Beirle, S.; Seemann, K.; Leiste, H.
    2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018
  1031. Loss mechanisms of microwave and THz radiation in poly and single crystalline diamond
    Scherer, T.
    2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018
  1032. Application of CVD diamond discs in high power fusion gyrotrons and power plants
    Ruess, S.; Aiello, G.; Gantenbein, G.; Gärtner, M.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Weggen, J.; Jelonnek, J.
    2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018
  1033. Application of diamond technology to microwave systems in nuclear fusions machines
    Grossetti, G.; Aiello, G.; Mazzocchi, F.; Meier, A.; Schreck, S.; Spaeh, P.; Strauss, D.; Scherer, T.
    2018. DPG-Frühjahrstagung der Sektion Kondensierte Materie gemeinsam mit der EPS (2018), Berlin, Germany, March 11–16, 2018
  1034. Towards advanced fusion gyrotrons: 2018 update on activities within EUROfusion
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K.; Bruschi, A.; Chelis, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Latsas, G. P.; Pagonakis, I. G.; Peponis, D. V.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Scherer, T.; Schmid, M.; Strauss, D.; Wu, C.; Thumm, M.; Tigelis, I.; Tran, M. Q.; Wilde, F.; Zein, A.
    2018. 20th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (2018), Greifswald, Germany, May 14–17, 2018
  1035. High-power gyrotron development at KIT: Towards multi-megawatt power levels at THz frequencies
    Jelonnek, J.; Aiello, G.; Avramidis, K. A.; Gantenbein, G.; Ioannidis, Z.; Jin, J.; Kalaria, P.; Leonhardt, W.; Mellein, D.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, T.; Ruess, S.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Wu, C.; Zein, A.
    2018. 8th International Workshop on Terahertz Technology and Applications (2018), Kaiserslautern, Germany, March 20–21, 2018
  1036. Status of the 8 MW multi-frequency ECRH-system at ASDEX
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A.; Denisov, G.; Chirkov, A.; Malygin, V.; Popov, L.; Myasnikov, V.; Tai, E.; Solyanova, E.
    2018. (ASDEX Upgrade Team, Ed.), 19th International Vacuum Electronics Conference (IVEC 2018), Monterey, CA, USA, April 24–26, 2018
  1037. Synthesis and Characterization of a Heterometallic Extended Architecture Based on a Manganese(II)-Substituted Sandwich-Type Polyoxotungstate
    Ibrahim, M.; Moreno-Pineda, E.; Bergfeldt, T.; Anson, C.; Powell, A.
    2018. Materials, 11 (1), 155. doi:10.3390/ma11010155
  1038. Rare-earth aluminosilicate (RE₂O₃–Al₂O₃–SiO₂) glasses and their application as solders for joining of silicon carbide components. PhD dissertation
    Ahmad, S.
    2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000079862
  1039. Effect of milling time and annealing temperature on nanoparticles evolution for 13.5% Cr ODS ferritic steels by joint application of XAFS and TEM
    He, P.; Hoffmann, J.; Möslang, A.
    2018. Journal of nuclear materials, 501, 381–387. doi:10.1016/j.jnucmat.2018.01.021
  1040. A review of laser electrode processing for development and manufacturing of lithium-ion batteries
    Pfleging, W.
    2018. Nanophotonics, 7 (3), 549–573. doi:10.1515/nanoph-2017-0044
  1041. Cold rolled tungsten (W) plates and foils : Evolution of the tensile properties and their indication towards deformation mechanisms
    Bonk, S.; Hoffmann, J.; Hoffmann, A.; Reiser, J.
    2018. International journal of refractory metals & hard materials, 70, 124–133. doi:10.1016/j.ijrmhm.2017.09.007
  1042. Laser-Materials Processing for Energy Storage Applications
    Kim, H.; Smyrek, P.; Zheng, Y.; Pfleging, W.; Piqué, A.
    2017. Pulsed Laser Ablation - Advances and Applications in Nanoparticles and Nanostructuring Thin Films. Ed.: I. N. Mihailescu, 499–544, Pan Stanford Publishing Pte Ltd. doi:10.4032/9781315185231
  1043. Synthesis of local epitaxial α-(Cr₁-ₓAlₓ)₂O₃ thin films (0.08 ≤ x ≤ 0.16) on α-Al₂O₃ substrates by r.f. magnetron sputtering
    Gao, Y.; Leiste, H.; Ulrich, S.; Stüber, M.
    2017. Thin solid films, 644, 129–137. doi:10.1016/j.tsf.2017.05.054
  1044. Tomographic atom probe study of nanostructure evolution of oxide dispersion strengthened steels under ion irradiation
    Orlov, N. N.; Rogozhkin, S. V.; Bogachev, A. A.; Korchuganova, O. A.; Nikitin, A. A.; Zaluzhnyi, A. G.; Kozodaev, M. A.; Kulevoy, T. V.; Kuibeda, R. P.; Fedin, P. A.; Chalykh, B. B.; Lindau, R.; Hoffmann, J.; Möslang, A.; Vladimirov, P.
    2017. МЕТАЛЛЫ, 2017 (5), 70–76
  1045. On the influence of microstructure on the fracture behaviour of hot extruded ferritic ODS steels
    Das, A.; Viehrig, H. W.; Altstadt, E.; Heintze, C.; Hoffmann, J.
    2017. Journal of nuclear materials, 497, 60–75. doi:10.1016/j.jnucmat.2017.10.051
  1046. Ferromagnetic Film : Substrate Decoupling for Sensor Applications
    Beirle, S.; Seemann, K.; Leiste, H.; Ulrich, S.
    2017. Advanced engineering materials, 19 (12), Art.Nr. 1700397. doi:10.1002/adem.201700397
  1047. Modeling and Experimental Validation of Hydrogen Behavior in Beryllium
    Vladimirov, P. V.; Bachurin, D.; Chakin, V.; Klimenkov, M.; Stihl, C.; Möslang, A.
    2017, November 8. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1048. Direct Evidence of Significant Cation Intermixing in Upconverting Core@Shell Nanocrystals : Toward a New Crystallochemical Model
    Hudry, D.; Busko, D.; Popescu, R.; Gerthsen, D.; Abeykoon, A. M. M.; Kübel, C.; Bergfeldt, T.; Richards, B. S.
    2017. Chemistry of materials, 29 (21), 9238–9246. doi:10.1021/acs.chemmater.7b03118
  1049. Priority Programme 1473 (SPP 1473) funded by the German Research Foundation: "Materials with new design for improved lithium ion batteries - WeNDeLIB
    Seifert, H. J.
    2017. International journal of materials research, 108 (11), 866–868
  1050. Si- and Sn-containing SiOCN-based nanocomposites as anode materials for lithium ion batteries: synthesis, thermodynamic characterization and modeling
    Rohrer, J.; Vrankovic, D.; Cupid, D.; Riedel, R.; Seifert, H. J.; Albe, K.; Graczyk-Zajac, M.
    2017. International journal of materials research, 108 (11), 920–932. doi:10.3139/146.111517
  1051. Impact of pretreatment conditions on defect formation during the fabrication of Al-based corrosion barriers by ECX process
    Wulf, S.-E.; Krauss, W.; Konys, J.
    2017. Fusion engineering and design, 124, 1091–1095. doi:10.1016/j.fusengdes.2017.03.115
  1052. First results of the QUENCH-ALISA bundle test
    Stuckert, J.; Birchley, J.; Große, M.; Hollands, T.; Kalilainen, J.; Laier, J.; Lind, T.; Moch, J.; Peters, U.; Steinbrück, M.; Zhang, Y.
    2017, October 17. 23rd International QUENCH Workshop, Karlsruhe Institute of Technology, Karlsruhe, 17.-19.10.2017
  1053. Lessons learned from the QUENCH-LOCA experiments
    Stuckert, J.; Große, M.; Steinbrück, M.; Walter, M.; Wensauer, A.
    2017, October 17. 23rd International QUENCH Workshop, Karlsruhe Institute of Technology, Karlsruhe, 17.-19.10.2017
  1054. 23rd International QUENCH Workshop : 17-19 October 2017, Karlsruhe Institute of Technology, Karlsruhe, Germany
    Steinbrück, M. (Ed.)
    2017. Karlsruher Institut für Technologie (KIT)
  1055. Integrated computational / experimental design of self-healing CMCs
    Markel, I. J.; Steinbrück, M.; Cupid, D. M.; Seifert, H. J.
    2017, October 9. MS&T 2017 Conference & Exhibition Sponsorships, Pittsburgh, PA, October 8-12, 2017
  1056. Phase diagram, thermodynamic investigations, and modelling of systems relevant to lithium-ion batteries
    Fürtauer, S.; Li, D.; Henriques, D.; Beutl, A.; Giel, H.; Cupid, D.; Markus, T.; Flanorfer, H.
    2017. International journal of materials research, 108 (11), 887–903. doi:10.3139/146.111561
  1057. Combined Battery Calorimetry and modelling of Li-ion cells for improved battery and thermal management systems
    Ziebert, C.; Uhlmann, N.; Ouyang, S.; Lei, B.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2017, September 28. 4rd International Conference Automotive Battery Management Systems, Mainz, September 26 – 28, 2017
  1058. Combinatorial exploration of the high entropy alloy system Co-Cr-Fe-Mn-Ni
    Kauffmann, A.; Stüber, M.; Leiste, H.; Ulrich, S.; Schlabach, S.; Szabo, D. V.; Seils, S.; Gorr, B.; Chen, H.; Seifert, H.-J.; Heilmaier, M.
    2017. Surface and coatings technology, 325, 174–180. doi:10.1016/j.surfcoat.2017.06.041
  1059. High-temperature oxidation behavior of classical zirconium alloys and new ATF cladding materials
    Steinbrück, M.; Tang, C.
    2017, September 8. The 3rd Asian Nuclear Fuel Conference, September 8-9, 2017, Jeju-do, K
  1060. Enthalpies of formation of layered LiNiₓMnₓCo₁₋₂ₓO₂ (0 ≤ x ≤ 0.5) compounds as lithium ion battery cathode materials
    Masoumi, M.; Cupid, D. M.; Reichmann, T. L.; Chang, K.; Music, D.; Schneider, J. M.; Seifert, H. J.
    2017. International journal of materials research, 108 (11), 869–878. doi:10.3139/146.111553
  1061. Dependence of the constitution, microstructure and electrochemical behaviour of magnetron sputtered Li-Ni-Mn-Co-O thin film cathodes for lithium-ion batteries on the working gas pressure and annealing conditions
    Strafela, M.; Fischer, J.; Music, D.; Chang, K.; Schneider, J.; Leiste, H.; Rinke, M.; Bergfeldt, T.; Seifert, H. J.; Ulrich, S.
    2017. International journal of materials research, 108 (11), 879–886. doi:10.3139/146.111552
  1062. High-temperature interaction of oxygen-preloaded Zr1Nb alloy with nitrogen
    Steinbrück, M.; Prestel, S.; Gerhards, U.
    2017. 2017 Water Reactor Fuel Performance Meeting (WRFPM2017), Jeju Island, KOR, September 10-14, 2017
  1063. Core degradation and hydrogen source term during in-vessel accident scenarios - Results from the QUENCH program at KIT
    Steinbrück, M.; Stuckert, J.; Große, M.
    2017, July 6. CLADS workshop, July 5-6 , 2017, Tomioka, Fukushima, J
  1064. Towards a programme of testing and qualification for structural and plasma-facing materials in ‘fusion neutron’ environments
    Stork, D.; Heidinger, R.; Muroga, T.; Zinkle, S. J.; Moeslang, A.; Porton, M.; Boutard, J.-L.; Gonzalez, S.; Ibarra, A.
    2017. Nuclear fusion, 57 (9), Art. Nr.: 092013. doi:10.1088/1741-4326/aa60af
  1065. Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications
    Zinkle, S. J.; Boutard, J. L.; Hoelzer, D. T.; Kimura, A.; Lindau, R.; Odette, G. R.; Rieth, M.; Tan, L.; Tanigawa, H.
    2017. Nuclear fusion, 57 (9), Art. Nr.: 092005. doi:10.1088/1741-4326/57/9/092005
  1066. Experimental Analysis of Thermal Runaway in 18650 Cylindrical Li-Ion Cells Using an Accelerating Rate Calorimeter
    Lei, B.; Zhao, W.; Ziebert, C.; Uhlmann, N.; Rohde, M.; Seifert, H.
    2017. Batteries, 3 (2), 14. doi:10.3390/batteries3020014
  1067. 3D Battery
    Pfleging, W.
    2017, May 16. JITRI-KIT Technology Transfer Forum on Battery-Technology Jiangsu Industrial Technology Research Institute (JITRI), Nanjing, China, 15-17 May 2017
  1068. Effect of Atmosphere and Sample Thickness on Kinetics, Microstructure, and Compressive Stresses of Chromia Scale Grown on Ni–25Cr
    Simon, D.; Gorr, B.; Christ, H. J.
    2017. Oxidation of Metals, 87 (3-4), 417–429. doi:10.1007/s11085-016-9702-4
  1069. The effect of annealing on mechanical properties and constitution of TiC:H and TiC/a-C:H thin films deposited by high power impulse magnetron sputtering
    Poltorak, C.; Leiste, H.; Mikulla, C.; Rinke, M.; Wantzen, K.; Pavlides, C.; Burger, W.; Albers, A.; Stüber, M.; Ulrich, S.
    2017. 8th International Conference on Fundamentals and Applications of HIPIMS (2017), Brunswick, Germany, June 13–14, 2017
  1070. Long-term corrosion behavior of Al-based coatings in flowing Pb–15.7Li, produced by electrochemical ECX process
    Wulf, S.-E.; Krauss, W.; Konys, J.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1071. Evaluation of Magnetron sputtered protective ZR-C-AL coatings for accident tolerant zircaloy claddings
    Tang, C.; Steinbrueck, M.; Grosse, M.; Ulrich, S.; Stueber, M.; Seifert, H. J.
    2017. Water Reactor Fuel Performance Meeting (WRFPM), September 10-14, 2017, Jeju Island, Korea, 1–9
  1072. Analyse des mit TiC beschichteten Feststoffelektrolyten einer AMTEC-Zelle. master’s thesis
    Bologa, M.-V.
    2017
  1073. Predicting the mechanical behaviour of tungsten in a fusion environment
    Abernethy, R. G.; Howard, C.; Hardie, C.; Hosemann, P.; Schneider, H.-C.; Klimenkov, M.; Roberts, S. G.; Armstrong, D.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1074. First-principles modelling of anomalous precipitation in neutron-irradiated W(RE, OS) alloys
    Nguyen-Manh, D.; Wrobel, J. S.; Klimenkov, M.; Dudarev, S. L.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1075. Long-term stability of austenitic ods steel
    Gräning, T.; Rieth, M.; Möslang, A.; Klimenkov, M.; Seils, S.; Edmondson, P.; Heintze, C.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1076. EUROFER improvement by optimized chemical compositions
    Hoffmann, J.; Rieth, M.; Klimenkov, M.; Baumgärtner, S.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1077. Microstructural evaluation of beryllium after neutron irradiation up to 6000 appm helium production
    Klimenkov; Jäntsch, U.; Hoffmann, J.; Kuksenko, V.; Vladimirov, P.; Chakin, V.; Möslang, A.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1078. Effect of Neutron Irradiation on Microstructure and Mechanical Properties of EUROFER-ODS Alloy
    Kimenkov, M.; Lindau, R.; Jäntsch, U.; Möslang, A.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1079. Radiation damage studies in fusion reactor steels by means of small-angle neutron scattering (SANS)
    Coppola, R.; Klimenkov, M.; Lindau, R.; Möslang, A.; Rieth, M.; Valli, M.
    2017. Physica / B, 551, 407–412. doi:10.1016/j.physb.2017.12.040
  1080. Overview of current reactor design and fusion structural materials
    Möslang, A.; Boccaccini, L.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1081. Decoupling soft ferromagnetic Fe-Co-Hf-N films from WC-Co substrates for sensor applications
    Beirle, S.; Seemann, K.; Leiste, H.
    2017. IEEE International Magnetics Conference (INTERMAG Europe), Dublin, IRL, April 24-28, 2017
  1082. Development and Qualification of Functional Materials for the European HCPB TBM
    Zmitko, M.; Poitevin, Y.; Vladimirov, P.; Knitter, R.; Kolb, M.; Leys, O.; Heuser, J.; Schneider, H. C.; Rolli, R.; Chakin, V.; Pupeschi, S.; Magielsen, L.; Fedorov, A.
    2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyoto, Japan, September 25–29, 2017
  1083. Soft ferromagnetic Fe-Co-Hf-N films with in-plane uniaxial anisotropy on WC-Co substrates used as a sensor system for cutting tools
    Beirle, S.; Seemann, K.; Leiste, H.
    2017. European Symposiun on Intelligent Materials, Kiel, June 7-9, 2017
  1084. Thermochemical Investigations of LiNixMnxCo1-2xO2 (0≤x≤0.5) Phases (NMC)
    Ziebert, C.; Masoumi, M.; Cupid, D. M.; Reichmann, T. L.; Seifert, H. J.
    2017. 13th Annual Lithium Battery Materials & Chemistries (2017), Arlington, VA, USA, October 31–November 1, 2017
  1085. Thermal runaway of Lithium batteries analyzed by Accelerating Rate Calorimetry and Thermography
    Ziebert, C.; Uhlmann, N.; Ouyang, S.; Lei, B.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2017. 8th Annual Battery Safety Conference, Arlington, VA, United States, 2 - 3 November, 2017
  1086. Batterie-Kalorimetrie an Li-Ionen-Zellen für verbesserte Batterie- und Thermomanagementsysteme
    Ziebert, C.; Uhlmann, N.; Lei, B.; Zhao, W.; Seifert, H. J.
    2017. 6. VDI-Fachkonferenz: Thermomanagement in elektromotorisch angetriebenen PKW (01KO712017), Leinfelden-Echterdingen, 14. - 15. November 2017
  1087. Challenges for electrochemical and thermal characterization of Li-ion cells to improve thermal management and prevent thermal runaway
    Ziebert, C.; Melcher, A.; Lei, B.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2017. The Battery Show Europe Conference, Sindelfingen, Germany, April 4, 2017 to April 6, 2017
  1088. 3D Laser Battery – Design and manufacturing of high power / high energy lithium-ion cells
    Pfleging, W.
    2017. International Pioneer Forum on Laser-Enabled Micro/Nano-Applications (LEMA 2017), May 18, 2017, Changzhou, Jiangsu, China
  1089. Laser Processing of Electrode Materials – Concepts for high power / high energy lithium-ion cells
    Pfleging, W.
    2017. 3rd International Conference on Mechanical Engineering and Automation Science (ICMEAS), Birmingham, UK, 13-15 October 2017
  1090. Influence of nitrogen on the oxidation behavior of Zircaloy-4-results of in-situ neutron radiography investigations
    Grosse, M.; Pulvermacher, S.; Steinbrück, M.; Schillinger, B.
    2017. A New Paradigm in Nuclear Power Safety : Proceedings of the International Congress on Advances in Nuclear Power Plants, ICAPP 2017, Fukui and Kyoto, Japan, 24th - 28th April 2017, Atomic Energy Society of Japan
  1091. ODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloying
    Pazos, D.; Cintins, A.; Castro, V. de; Fernández, P.; Hoffmann, J.; García Vargas, W.; Leguey, T.; Anspoks, A.; Purans, J.; Iturriza, I.; Ordása, N.
    2017. ICFRM-18. The 18th International Conference on Fusion Reactor Materials, Aomori, J, November 5-10, 2017
  1092. Phases formation on new 9%Cr advanced steels for fusion reactors
    Fernández, P.; Hoffmann, J.; Rieth, M.; Roldán, M.; Gómez-Herrero, A.
    2017. ICFRM-18. The 18th International Conference of Fusion Reactor Materials, Aomori, J, November 5- 10, 2017
  1093. EUROFER improvement by optimized chemical compositions
    Jan Hoffmann; Michael Rieth; Michael Klimenkov; Siegfried Baumgärtner
    2017. ICFRM-18, The 18th International Conference on Fusion and Reactor Materials, Aomori, Japan, 06.-10.11.2017
  1094. Industrial nitride hardening of EUROFER97 for improved fatigue lifetime
    Hoffmann, J.; Seitz, M.; Rieth, M.; Margraf, P.; Senn, R.; Klimenkov, M.; Baumgärtner, S.; Lindau, R.; Jäntsch, U.; Franke, P.; Möslang, A.
    2017. EUROMAT2017, Thessaloniki, 17.-22.09.2017
  1095. Corrigendum to ’On the influence of microstructure on the fracture behaviour of hot extruded ferritic ODS steels’
    Das, A.; Viehrig, H. W.; Altstadt, E.; Heintze, C.; Hoffmann, J.
    2017. Journal of nuclear materials, 499, 652. doi:10.1016/j.jnucmat.2017.11.032
  1096. Development of advanced high heat flux and plasma-facing materials
    Linsmeier, C.; Rieth, M.; Aktaa, J.; Chikada, T.; Hoffmann, A.; Hoffmann, J.; Houben, A.; Kurishita, H.; Jin, X.; Li, M.; Litnovsky, A.; Matsuo, S.; Müller, A. von; Nikolic, V.; Palacios, T.; Pippan, R.; Qu, D.; Reiser, J.; Riesch, J.; Shikama, T.; Stieglitz, R.; Weber, T.; Wurster, S.; You, J.-H.; Zhou, Z.
    2017. Nuclear fusion, 57 (SI), Article no 092007. doi:10.1088/1741-4326/aa6f71
  1097. Transmission electron microscopy study of the heavy-ion-irradiation-induced changes in the nanostructure of oxide dispersion strengthened steels
    Rogozhkin, S. V.; Bogachev, A. A.; Orlov, N. N.; Korchuganova, O. A.; Nikitin, A. A.; Zaluzhnyi, A. G.; Kozodaev, M. A.; Kulevoy, T. V.; Kuibeda, R. P.; Fedin, P. A.; Chalykh, B. B.; Lindau, R.; Hoffman, Y.; Möslang, A.; Vladimirov, P.; Klimenkov, M.
    2017. Russian metallurgy (metally), 2017 (7), 554–560. doi:10.1134/S0036029517070126
  1098. Combined BC/MD approach to the evaluation of damage from fast neutrons and its implementation for beryllium irradiation in a fusion reactor
    Borodin, V. A.; Vladimirov, P. V.
    2017. Modelling and simulation in materials science and engineering, 25 (8), Art.Nr.: 084005. doi:10.1088/1361-651X/aa8f6b
  1099. Thermochemical stability of Li-Cu-O ternarycompounds stable at room temperature analyzed by experimental and theoretical methods
    Lepple, M.; Rohrer, J.; Adam, R.; Cupid, D. M.; Rafaja, D.; Albe, K.; Seifert, H. J.
    2017. International journal of materials research, 108 (11), 959–970. doi:10.3139/146.111560
  1100. Interlaboratory study of the heat capacity of LiNi1/3Mn1/3Co1/3O2 (NMC111) with layered structure
    Cupid, D. M.; Gotcu, P.; Beutl, A.; Bergfeldt, T.; Giel, H.; Henriques, D.; Kozlov, A.; Masoumi, M.; Seidel, J.; Flandorfer, H.; Markus, T.; Mertens, F.; Schmid-Fetzer, R.; Seifert, H. J.
    2017. International journal of materials research, 108 (11), 1008–1021. doi:10.3139/146.111571
  1101. Coexistence of conversion and intercalation mechanisms in lithium ion batteries: Consequences for microstructure and interaction between the active material and electrolyte
    Adam, R.; Lepple, M.; Mayer, N. A.; Cupid, D. M.; Qian, Y.; Niehoff, P.; Schappacher, F. M.; Wadewitz, D.; Balachandran, G.; Bhaskar, A.; Bramnik, N.; Klemm, V.; Ahrens, E.; Giebeler, L.; Fauth, F.; Popescuh, C. A.; Seifert, H. J.; Winter, M.; Ehrenberg, H.; Rafaja, D.
    2017. International journal of materials research, 108 (11), 971–983. doi:10.3139/146.111509
  1102. Ultrasonic influence on evolution of disordered dislocation structures
    Bachurin, D. V.; Murzaev, R. T.; Nazarov, A. A.
    2017. Modelling and simulation in materials science and engineering, 25 (8), Art.Nr.: 085010. doi:10.1088/1361-651X/aa9199
  1103. Ductilisation of tungsten (W) through cold-rolling: correlation of microstructure and mechanical properties
    Bonk, S.; Hoffmann, J.; Hoffmann, A.; Reiser, J.
    2017. 19th Plansee Seminar (2017), Reutte, Austria, May 29–June 2, 2017
  1104. Mechanisms of plastic deformation in cold-rolled, ultrafine-grained tungsten sheets
    Bonk, S.; Bonnekoh, C.; Lied, P.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Rieth, M.; Reiser, J.
    2017. 18th International Conference on Fusion Reactor Materials (ICFRM-18) (2017), Aomori, Japan, November 5–17, 2017
  1105. Ductilisation of tungsten (W) through cold-rolling: Correlation of microstructure and mechanical properties
    Bonk, S.; Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Rieth, M.
    2017. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2017), Thessaloniki, GR, September 17-22, 2017
  1106. Effect of Structural State of Austenitic 15-15 Ti Steel on Initiation and Propagation of Solution-Based Corrosion Attack in Flowing Liquid Pb-Bi Eutectic at 400 and 500 °C
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2017. 25th International Conference on Nuclear Engineering, Volume 2 : Plant Systems, Structures, Components and Materials, Shanghai, China, 2nd - 6th July 2017, Art.Nr. V002T03A056, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE2566634
  1107. Conceptual design studies of the Electron Cyclotron launcher for DEMO reactor
    Moro, A.; Bruschi, A.; Franke, T.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Hizanidis, K.; Tigelis, I.; Tran, M.-Q.; Tsironis, C.
    2017. The European physical journal / Web of Conferences, 157, Art.Nr. 03036. doi:10.1051/epjconf/201715703036
  1108. UK Research in LOCA-Related Activities and Co-operation with the Karlsruhe Research Centre - A Historical Perspective
    Lillington, J.; Walker, S.; Steinbrück, M.; Stuckert, J.
    2017. 23rd International QUENCH Workshop, Karlsruhe Institute of Technology, Karlsruhe, Germany, 17.-19.10.2017
  1109. High-temperature oxidation resistance and self-healing behavior of Cr2AlC MAX phase coating on Zircaloy-4
    Tang, C.; Steinbrueck, M.; Grosse, M.; Ulrich, S.; Stueber, M.; Seifert, H. J.
    2017. 23rd International QUENCH Workshop, Karlsruhe Institute of Technology, Karlsruhe, Germany, 17.-19.10.2017. doi:10.5445/IR/1000076201
  1110. Update of the QUENCH program
    Steinbrück, M.; Stuckert, J.; Große, M.
    2017. 23rd International QUENCH Workshop, Karlsruhe Institute of Technology, Karlsruhe, Germany, 17.-19.10.2017
  1111. Variation in time of the high temperature oxidation of zirconium alloys in various atmospheres
    Van Appeldorn, P.; Steinbrück, M.; Stegmaier, U.
    2017. 23rd International QUENCH Workshop, Karlsruhe Institute of Technology, Karlsruhe, Germany, 17.-19.10.2017
  1112. CALPHAD modeling of metastable phases and ternary compounds in Ti-Al-N system
    Zhang, Y.; Franke, P.; Seifert, H. J.
    2017. Calphad, 59, 142–153. doi:10.1016/j.calphad.2017.09.006
  1113. Systems Engineering perspective to the Integration of the Heating and Current Drive System in the EU DEMO: Analysis of Requirements and Functions
    Grossetti, G.; Brown, R.; Franke, T.; Gafert, J.; Galliara, T.; Jenkins, I.; Mantel, N.; Strauß, D.; Tran, M. Q.; Wenninger, R.
    2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyoto, Japan, September 25–29, 2017
  1114. Status of the Final Design of the Structural System for the ITER EC H&CD Upper Launcher
    Spaeh, P.; Aiello, G.; Chavan, R.; Gagliardi, M.; Grossetti, G.; Heemskerk, C.; Landis, J.-D.; Meier, A.; Pacheco, J.; Ronden, D.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyoto, Japan, September 25–29, 2017
  1115. ITER ECRH Upper Launcher Diamond Window – Qualification and Testing of a Protection Important Component
    Schreck, S.; Aiello, G.; Dieterle, S.; Gagliardi, M.; Meier, A.; Saibene, G.; Scherer, T.; Strauss, D.
    2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyoto, Japan, September 25–29, 2017
  1116. Neutronic Shielding Design of the ITER EC Upper Launcher
    Spaeh, P.; Aiello, G.; Gagliardi, M.; Meier, A.; Pacheco, J.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2017. 27th IEEE Symposium on Fusion Engineering (SOFE), Shanghai, China, June 4-8, 2017
  1117. THz QCL based polarimeter for fusion plasma diagnostics
    Mazzocchi, F.; Scherer, T.
    2017. US/EU/JPN Workshop on RF Heating Technology and 2017 US/JPN Workshop on RF Physics, Santa Monica, CA, September 5-8, 2017
  1118. Current status of the ECRH system at ASDEX Upgrade
    Scherer, T.
    2017. US/EU/JPN Workshop on RF Heating Technology and 2017 US/JPN Workshop on RF Physics, Santa Monica, CA, September 5-8, 2017
  1119. Millimeter-wave system design integration for the ITER EC upper launcher
    Scherer, T.
    2017. US/EU/JPN Workshop on RF Heating Technology and 2017 US/JPN Workshop on RF Physics, Santa Monica, CA, September 5-8, 2017
  1120. 2017 status of gyrotron R&D and advanced developments within KIT and EUROfusion
    Jelonnek, J.; Scherer, T.
    2017. US/EU/JPN Workshop on RF Heating Technology and 2017 US/JPN Workshop on RF Physics, Santa Monica, CA, September 5-8, 2017
  1121. High-temperature tests of silicon carbide composite cladding under GFR conditions
    Angelici Avincola, V.; Fitzgerald, K.; Shepherd, D.; Kinay, D.; Sauder, C.; Steinbrueck, M.
    2017. Energy procedia, 127, 320–328. doi:10.1016/j.egypro.2017.08.116
  1122. Comparison of polycrystalline and single crystalline CVD Diamond for sub-mm and THz applications – Testing of surface modified diamond at high microwave power
    Scherer, T.; Strauss, D.; Meier, A.
    2017. 11th Conference on New Diamond and Nano Carbons (2017), Cairns, Australia, May 28–June 1, 2017
  1123. Status of the Extended Multi-Frequency ECRH System at ASDEX Upgrade
    Stober, J.; Wagner, D.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schrepfer, G.; Schubert, M.; Schütz, H.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Zapevalov, V.; Chirkov, A.; Malygin, V.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2017. (ASDEX UG team, Ed.), 29th Joint Russian-German Workshop on ECRH and Gyrotrons, Karlsruhe, Stuttgart, Garching, May 29 - June 3, 2017
  1124. Impact on ITER EC H&CD Upper Launcher due tot he EC Transmission Line Design changes: Open Discussion
    Grossetti, G.; Aiello, G.; Meier, A.; Spaeh, P.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.
    2017. 29th Joint Russian-German Workshop on ECRH and Gyrotrons, Karlsruhe, Stuttgart, Garching, May 29 - June 3, 2017
  1125. ITER EC Upper Launcher and Diamond Window – Status towards Final Design
    Schreck, S.; Aiello, G.; Grossetti, G.; Meier, A.; Spaeh, P.; Scherer, T.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2017. 29th Joint Russian-German Workshop on ECRH and Gyrotrons, Karlsruhe, Stuttgart, Garching, May 29 - June 3, 2017
  1126. THz Multi line-of-sight polarimeter for fusion reactors
    Mazzocchi, F.; Grossetti, G.; Mlynek, A.; Strauss, D.; Scherer, T.
    2017. 2nd European Conference on Plasma Diagnostics (ECPD), Bordeaux, F, April 18-21, 2017. Book of Abstracts P-54
  1127. Dielectric investigation methods in the THz frequency range
    Scherer, T.; Mazzocchi, F.; Grossetti, G.
    2017. 81. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Dresden, 19.-24. März 2017. DF 7.6
  1128. THz Diagnostics for fusion – A new challenge for dielectric windows
    Mazzocchi, F.; Grossetti, G.; Strauss, D.; Scherer, T.
    2017. 81. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Dresden, 19.-24. März 2017. DF 7.5
  1129. Dielectric diamond window for the ITER EC H&CD Upper Launcher: design, analysis and qualification
    Aiello, G.; Gagliardi, M.; Grossetti, G.; Mazzocchi, F.; Meier, A.; Saibene, G.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Scherer, T.
    2017. 81. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Dresden, 19.-24. März 2017. DF 7.4
  1130. Design, materials composition and manufacturing of components for advanced modular gyrotron prototypes
    Ruess, S.; Aiello, G.; Gantenbein, G.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Weggen, J.; Jelonnek, J.
    2017. 81. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Dresden, 19.-24. März 2017. DF 7.3
  1131. Electron Cyclotron systems in future Fusion Power Plants, using dielectric microwave transmission windows
    Grossetti, G.; Aiello, G.; Mazzocchi, F.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2017. 81. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Dresden, 19.-24. März 2017. DF 7.2
  1132. Artificial polycrystalline diamond for microwave applications in fusion devices
    Schreck, S.; Aiello, G.; Grossetti, G.; Mazzocchi, F.; Meier, A.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Scherer, T.
    2017. Hasselt Diamond Workshop 2017 - SBDD XXII, Hasselt, B, March 8-10, 2017. Book of Abstracts p.115
  1133. Safest roadmap for corium experimental research in Europe
    Journeau, C.; Bouyer, V.; Cassiaut-Louis, N.; Fouquart, P.; Piluso, P.; Ducros, G.; Gossé, S.; Guéneau, C.; Quaini, A.; Fluhrer, B.; Miassoedov, A.; Stuckert, J.; Steinbrueck, M.; Bechta, S.; Kudinov, P.; Ma, W. M.; Sehgal, B. R.; Hozer, Z.; Guba, A.; Manara, D.; Bottomley, D. P.; Fischer, M.; Langrock, G.; Schmidt, H.; Kiselova, M.; Zdarek, J.
    2017. Journal of risk and uncertainty, 4 (3), Art.Nr. 030901. doi:10.1115/1.4037878
  1134. Which Resolution can be Achieved in Practice in Neutron Imaging Experiments? – A General View and Application on the Zr - ZrH 2 and ZrO 2 - ZrN Systems
    Grosse, M.; Kardjilov, N.
    2017. Physics procedia, 88, 266–274. doi:10.1016/j.phpro.2017.06.037
  1135. Cooling concepts for the CVD diamond Brewster-angle window
    Aiello, G.; Scherer, T. A.; Strauss, D.; Avramidis, K.; Jelonnek, J.; Franke, T.; Tran, M. Q.
    2017. 42nd International Conference on Infrared Millimeter and Terahertz Waves (IRMMW-THz), Cancun, MEX, August 27 - September 1, 2017. Proceedings on USB-Stick, Art.Nr. 8067059, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2017.8067059
  1136. Cooling concepts for the CVD diamond Brewster-angle window
    Aiello, G.; Scherer, T. A.; Strauss, D.; Avramidis, K.; Jelonnek, J.; Franke, T.; Tran, M. Q.
    2017. 42nd International Conference on Infrared Millimeter and Terahertz Waves (IRMMW-THz 2017), Cancún, Mexico, August 27–September 1, 2017
  1137. Commissioning of the extended multi-frequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solynova, E. A.; Malygin, S. A.
    2017. ASDEX Upgrade Team (Ed.), 42nd International Conference on Infrared Millimeter and Terahertz Waves (IRMMW-THz), Cancun, MEX, August 27 - September 1, 2017. Proceedings on USB-Stick, RC 2.2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2017.8067025
  1138. Commissioning of the extended multi-frequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solynova, E. A.; Malygin, S. A.
    2017. (ASDEX Upgrade Team, Ed.), 42nd International Conference on Infrared Millimeter and Terahertz Waves (IRMMW-THz 2017), Cancún, Mexico, August 27–September 1, 2017
  1139. Developments of fusion gyrotrons for W7-X, ITER and EU DEMO: Ongoing activities and future plans of KIT
    Jelonnek, J.; Aiello, G.; Avramidis, K.; Gantenbein, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Marek, A.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Wilde, F.; Wu, C.; Zein, A.
    2017. 42nd International Conference on Infrared Millimeter and Terahertz Waves, IRMMW-THz 2017, Cancun, Mexico, 27th August - 1st September 2017, WC 2.1, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2017.8067248
  1140. High-temperature low-cycle fatigue behavior of a 9Cr-ODS steel : Part 1 - pure fatigue, microstructure evolution and damage characteristics
    Chauhan, A.; Hoffmann, J.; Litvinov, D. N.; Aktaa, J.
    2017. Materials science and engineering / A, 707, 207–220. doi:10.1016/j.msea.2017.09.031
  1141. Thin-film phase plates for transmission electron microscopy fabricated from metallic glass alloys
    Dries, M.; Obermair, M.; Hettler, S.; Hermann, P.; Seemann, K.; Seifried, F.; Ulrich, S.; Gerthsen, D.
    2017. Microscopy Conference 2017, Lausanne, CH, August 21-25, 2017. Proceedings published online, 754–755, SwissTech Convention Center
  1142. Thin-film phase plates for transmission electron microscopy fabricated from metallic glass alloys
    Dries, M.; Obermair, M.; Hettler, S.; Hermann, P.; Seemann, K.; Seifried, F.; Ulrich, S.; Gerthsen, D.
    2017. Microscopy Conference 2017, Lausanne, CH, August 21-25, 2017
  1143. Selective Laser Sintering as Manufacturing Process for the Realization of Complex Nuclear Fusion and High Heat Flux Components
    Neuberger, H.; Rey, J.; Hees, M.; Materna-Morris, E.; Bolich, D.; Aktaa, J.; Meier, A.; Fischer, S.; Schorle, C.; Fuhrmann, U.; Heger, R.; Dlouhý, I.; Stratil, L.; Kloetzer, B.
    2017. Fusion science and technology, 72 (4), 667–672. doi:10.1080/15361055.2017.1350521
  1144. Transition metal oxides as materials for additive laser marking on stainless steel
    Mihalev, M. S.; Hardalov, C. M.; Christov, C. G.; Rinke, M.; Leiste, H.
    2017. Acta polytechnica, 57 (4), 252–262. doi:10.14311/AP.2017.57.0252
  1145. Herstellung, Charakterisierung und Optimierung von austenitischen ODS Stählen. PhD dissertation
    Gräning, T.
    2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000074155
  1146. Natural ferromagnetic resonance damping optimisation in thin Fe–Co–Zr–N/Ti–Al–N films with in-plane uniaxial anisotropy
    Seemann, K.; Beirle, S.; Leiste, H.
    2017. Journal of physics / D, 50 (40), 405001. doi:10.1088/1361-6463/aa8495
  1147. DEMO port plug design and integration studies
    Grossetti, G.; Boccaccini, L. V.; Cismondi, F.; Del Nevo, A.; Fischer, U.; Franke, T.; Granucci, G.; Hernández, F.; Mozzillo, R.; Strauß, D.; Tran, M. Q.; Vaccaro, A.; Villari, R.
    2017. Nuclear fusion, 57 (11), Art. Nr. 116028. doi:10.1088/1741-4326/aa7f67
  1148. Theoretical and experimental study of the gradient properties and the resulting local crystalline structure and orientation in magnetron-sputtered CrAlN coatings with lateral composition and thickness gradient
    Krause, B.; Stube, M.; Zimin, A.; Steininger, R.; Trappen, M.; Ulrich, S.; Kashani, S. M. M.; Baumbach, T.
    2017. Journal of applied crystallography, 50, 1000–1010. doi:10.1107/S1600576717006513
  1149. Direct writing of a conducting polymer pattern in aqueous solution by using an ultrashort laser pulse
    Agarwal, N.; Ryu, H.; Mangang, M.; Pfleging, W.; Kim, J.
    2017. RSC Advances, 7 (61), 38565–38569. doi:10.1039/c7ra05195f
  1150. Protective coatings on zirconium-based alloys as accident-Tolerant fuel (ATF) claddings
    Tang, C.; Stueber, M.; Seifert, H. J.; Steinbrueck, M.
    2017. Corrosion reviews, 35 (3), 141–165. doi:10.1515/corrrev-2017-0010
  1151. Characterization of neutron irradiated tungsten by transmission electron microscopy
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Armstrong, D.; Gibson, J.; Roberts, S. G.
    2017. 19th Plansee Seminar (2017), Reutte, Austria, May 29–June 2, 2017
  1152. Ductilitsation of tungsten (W) through cold-rolling
    Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Bonk, S.; Bonnekoh, C.; Pippan, R.; Hoffmann, A.; Rieth, M.
    2017. 19th Plansee Seminar (2017), Reutte, Austria, May 29–June 2, 2017
  1153. Thermal stability of Eurofer 97 during long term thermal treatment
    Klimenkov, M.; Jäntsch, U.; Hoffmann, J.; Rieth, M.
    2017. Microscopy Conference (MC 2017), Lausanne, CH, August 21-25, 2017
  1154. 3D investigations at structural analysis of high temperature materials
    Jäntsch, U.; Klimenkov, M.; Rieth, M.
    2017. Microscopy Conference (MC 2017), Lausanne, CH, August 21-25, 2017
  1155. Development of high temperature liquid metal test facilities for qualification of materials and investigations of thermoelectrical modules
    Onea, A.; Hering, W.; Reiser, J.; Weisenburger, A.; DIez De Los Rios Ramos, N.; Lux, M.; Ziegler, R.; Baumgartner, S.; Stieglitz, R.
    2017. IOP conference series / Materials science and engineering, 228 (1), Art. Nr.: 012015. doi:10.1088/1757-899X/228/1/012015
  1156. Casting technology for ODS steels - The internal oxidation approach
    Miran, S.; Franke, P.; Möslang, A.; Seifert, H. J.
    2017. IOP conference series / Materials science and engineering, 228 (1), Art. Nr.: 012021. doi:10.1088/1757-899X/228/1/012021
  1157. Design and construction of the ATEFA facility for experimental investigations of AMTEC test modules
    DIez De Los Rios Ramos, N.; Hering, W.; Weisenburger, A.; Stüber, M.; Onea, A.; Lux, M.; Ulrich, S.; Stieglitz, R.
    2017. IOP conference series / Materials science and engineering, Art. Nr.: 012014. doi:10.1088/1757-899X/228/1/012014
  1158. DLC and carbon based nanostructured composite coatings – an overview of thin film design and process approaches towards high performance engineering applications
    Stüber, M.
    2017. 38th Brazilian Congress on Vacuum Applications in Industry and Science (CBRAVIC) 2017, Sao Jose dos Campos, Brasilien, 21.-24. August 2017
  1159. Characterization of corrosion phenomena and kinetics on T91 ferritic/martensitic steel exposed at 450 and 550 °C to flowing Pb-Bi eutectic with 10⁻⁷ mass% dissolved oxygen
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2017. Journal of nuclear materials, 494, 422–438. doi:10.1016/j.jnucmat.2017.07.031
  1160. Development of benchmark reduced activation ferritic/martensitic steels for fusion energy applications
    Tanigawa, H.; Gaganidze, E.; Hirose, T.; Ando, M.; Zinkle, S. J.; Lindau, R.; Diegele, E.
    2017. Nuclear fusion, 57 (9), 092004. doi:10.1088/1741-4326/57/9/092004
  1161. Ductilisation of tungsten (W): Tungsten laminated composites
    Reiser, J.; Garrison, L.; Greuner, H.; Hoffmann, J.; Weingärtner, T.; Jäntsch, U.; Klimenkov, M.; Franke, P.; Bonk, S.; Bonnekoh, C.; Sickinger, S.; Baumgärtner, S.; Bolich, D.; Hoffmann, M.; Ziegler, R.; Konrad, J.; Hohe, J.; Hoffmann, A.; Mrotzek, T.; Seiss, M.; Rieth, M.; Möslang, A.
    2017. International journal of refractory metals & hard materials, 69, 66–109. doi:10.1016/j.ijrmhm.2017.07.013
  1162. Progress in conceptual design of EU DEMO EC system
    Garavaglia, S.; Bruschi, A. B.; Franke, T.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Moro, A.; Poli, E.; Rispoli, N.; Strauss, D.; Tran, Q. M.
    2017. The European physical journal / Web of Conferences, 147, Art. Nr. 04002. doi:10.1051/epjconf/201714704002
  1163. Conceptual design of the EU DEMO EC-system: main developments and R&D achievements
    Granucci, G.; Aiello, G.; Alberti, S.; Avramidis, K. A.; Braunmüller, F.; Bruschi, A.; Chelis, J.; Franck, J.; Figini, L.; Gantenbein, G.; Garavaglia, S.; Grossetti, G.; Illy, S.; Ioannidis, Z.; Jelonnek, J.; Kalaria, P.; Latsas, G.; Moro, A.; Pagonakis, I. G.; Peponis, D.; Poli, E.; Rispoli, N.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Tsironis, C.; Wu, C.; Franke, T.; Tran, M. Q.
    2017. Nuclear fusion, 57 (11), Art. Nr. 116009. doi:10.1088/1741-4326/aa7b15
  1164. Investigation of creep cavities in a novel 12Cr0.36Ta steel employing three-dimensional electron backscatter diffraction technique
    Yadav, S. D.; Jäntsch, U.; Scherer, T.; Ahmadi, M. R.; Rosc, J.; Poletti, C.
    2017. Materials letters, 207, 76–79. doi:10.1016/j.matlet.2017.07.039
  1165. Relaxation of the residual defect structure in deformed polycrystals under ultrasonic action
    Murzaev, R. T.; Bachurin, D. V.; Nazarov, A. A.
    2017. The physics of metals and metallography, 118 (7), 621–629. doi:10.1134/S0031918X17070079
  1166. Nanocrystalline diamond protects Zr cladding surface against oxygen and hydrogen uptake : Nuclear fuel durability enhancement
    Skarohlid, J.; Ashcheulov, P.; Skoda, R.; Taylor, A.; Ctvrtlik, R.; Tomastik, J.; Fendrych, F.; Kopecek, J.; Chab, V.; Cichon, S.; Sajdl, P.; Macak, J.; Xu, P.; Partezana, J. M.; Lorincik, J.; Prehradna, J.; Steinbrück, M.; Kratochvilova, I.
    2017. Scientific reports, 7 (1), Art.Nr.: 6469. doi:10.1038/s41598-017-06923-4
  1167. European research activities towards a future DEMO gyrotron
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K.; Bertinetti, A.; Bruschi, A.; Chelis, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Latsas, G. P.; Laqua, H.; Leggieri, A.; Legrand, F.; Marek, A.; Pagonakis, I. G.; Peponis, D.; Savoldi, L.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Scherer, T.; Schmid, M.; Strauss, D.; Tigelis, I.; Thumm, M.; Tran, M. Q.; WIlde, F.; Wu, C.; Zanino, R.; Zein, A.
    2017. Strong Microwaves and Terahertz Waves : Sources and Applications, 10th International Workshop, Nizhny Novgorod, RUS, July 17-22, 2017, 198–199, Russian Academy of Sciences
  1168. Extension of the multi-frequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Malygin, V.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2017. ASDEX Upgrade Team (Ed.), Strong Microwaves and Terahertz Waves : Sources and Applications, 10th International Workshop, Nizhny Novgorod, RUS, July 17-22, 2017, 138–139, Russian Academy of Sciences
  1169. Extension of the multi-frequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Malygin, V.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2017. (ASDEX Upgrade Team, Ed.), 10th International Workshop Strong Microwaves and Terahertz Waves: Sources and Applications (2017), Nizhny Novgorod, Russia, July 17–22, 2017
  1170. The EC-system of EU DEMO: concepts for a reactor heating system
    Granucci, G.; Aiello, G.; Avramidis, K. A.; Bruschi, A.; Gantenbein, G.; Garavaglia, S.; Grossetti, G.; Jelonnek, J.; Moro, A.; Poli, E.; Rispoli, N.; Strauss, D.; Thumm, M.; Tigelis, I.; Tsironis, C.; Franke, T.; Tran, M. Q.
    2017. Strong Microwaves and Terahertz Waves : Sources and Applications, 10th International Workshop, Nizhny Novgorod, RUS, July 17-22, 2017, 136–137, Russian Academy of Sciences
  1171. The EC-system of EU DEMO: concepts for a reactor heating system
    Granucci, G.; Aiello, G.; Avramidis, K. A.; Bruschi, A.; Gantenbein, G.; Garavaglia, S.; Grossetti, G.; Jelonnek, J.; Moro, A.; Poli, E.; Rispoli, N.; Strauss, D.; Thumm, M.; Tigelis, I.; Tsironis, C.; Franke, T.; Tran, M. Q.
    2017. 10th International Workshop Strong Microwaves and Terahertz Waves: Sources and Applications (2017), Nizhny Novgorod, Russia, July 17–22, 2017
  1172. Design considerations for future DEMO gyrotrons : A review on related gyrotron activities within EUROfusion
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K.; Braunmueller, F.; Bruschi, A.; Chelis, J.; Franck, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Latsas, G. P.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Scherer, T.; Schmid, M.; Strauss, D.; Wu, C.; Tigelis, I.; Thumm, M.; Tran, M. Q.
    2017. Fusion engineering and design, 123, 241–246. doi:10.1016/j.fusengdes.2017.01.047
  1173. Cu-Zr nanoglasses : Atomic structure, thermal stability and indentation properties
    Nandam, S. H.; Ivanisenko, Y.; Schwaiger, R.; Śniadecki, Z.; Mu, X.; Wang, D.; Chellali, R.; Boll, T.; Kilmametov, A.; Bergfeldt, T.; Gleiter, H.; Hahn, H.
    2017. Acta materialia, 136, 181–189. doi:10.1016/j.actamat.2017.07.001
  1174. Effect of irradiation temperature on microstructure of ferritic-martensitic ODS steel
    Klimenkov, M.; Lindau, R.; Jäntsch, U.; Möslang, A.
    2017. Journal of nuclear materials, 493, 426–435. doi:10.1016/j.jnucmat.2017.06.024
  1175. Preventing Li-ion cell explosion during thermal runaway with reduced pressure
    Hofmann, A.; Uhlmann, N.; Ziebert, C.; Wiegand, O.; Schmidt, A.; Hanemann, T.
    2017. Applied thermal engineering, 124, 539–544. doi:10.1016/j.applthermaleng.2017.06.056
  1176. Assessment of industrial nitriding processes for fusion steel applications
    Seitz, M.; Hoffmann, J.; Rieth, M.; Margraf, P.; Senn, R.; Klimenkov, M.; Lindau, R.; Baumgärtner, S.; Jäntsch, U.; Franke, P.; Möslang, A.
    2017. Nuclear materials and energy, 13, 90–98. doi:10.1016/j.nme.2017.05.015
  1177. Corrosion issues in steels contacting Pb-Bi eutectic at high temperatures. Overview of KIT activity
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2017. European Commission funded International Workshop ’Materials Resistant to Extreme Conditions for Future Energy Systems’, Kyiv, UA, June 12-14, 2017
  1178. The role of dissolved oxygen in corrosion caused by liquid metals
    Schroer, C.
    2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, July 2–6, 2017
  1179. Creep behavior of austenitic steel 316L in low oxygen-containing Pb-Bi eutectic at 450-550⁰C
    Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
    2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, July 2–6, 2017
  1180. Effect of structural state of austenitic steel 15-15 Ti on initiation and propagation of solution-based corrosion attack in flowing liquid Pb-Bi eutectic at 400 and 500⁰C
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2017. 25th International Nuclear Engineering Conference (ICONE 2017), Shanghai, China, July 2–6, 2017
  1181. Mechanical characterization of electrochemically based W - Cu joints for low-temperature heat sink application
    Krauss, W.; Lorenz, J.; Konys, J.; Gaganidze, E.
    2017. Fusion engineering and design, 124, 220–225. doi:10.1016/j.fusengdes.2017.05.119
  1182. Ab initio study of beryllium surfaces with different hydrogen coverages
    Bachurin, D. V.; Vladimirov, P. V.
    2017. Acta materialia, 134, 81–92. doi:10.1016/j.actamat.2017.05.031
  1183. European research activities towards a future DEMO gyrotron
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K.; Bertinetti, A.; Bruschi, A.; Chelis, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Latsas, G. P.; Laqua, H.; Leggieri, A.; Legrand, F.; Marek, A.; Pagonakis, I. G.; Savoldi, L.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Scherer, T.; Schmid, M.; Strauss, D.; Tigelis, I.; Thumm, M.; Tran, M. Q.; WIlde, F.; Wu, C.; Zanino, R.; Zein, A.
    2017. 10th International Workshop Strong Microwaves and Terahertz Waves: Sources and Applications (2017), Nizhny Novgorod, Russia, July 17–22, 2017
  1184. Developments of fusion gyrotrons for W7-X, ITER and EU DEMO: Ongoing activities and future plans of KIT
    Jelonnek, J.; Aiello, G.; Avramidis, K.; Gantenbein, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Marek, A.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Ruess, T.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Wilde, F.; Wu, C.; Zein, A.
    2017. 42nd International Conference on Infrared Millimeter and Terahertz Waves (IRMMW-THz 2017), Cancún, Mexico, August 27–September 1, 2017
  1185. Reducing the brittle-to-ductile transition temperature of tungsten to -50⁰C by cold rolling
    Bonnekoh, C.; Reiser, J.; Zaefferer, S.; Baumgärtner, S.; Hoffmann, J.; Hoffmann, A.
    2017. 19th Plansee Seminar (2017), Reutte, Austria, May 29–June 2, 2017
  1186. How the Oxidation Stability of Metal Catalysts Defines the Metal-Assisted Chemical Etching of Silicon
    Williams, M. O.; Hiller, D.; Bergfeldt, T.; Zacharias, M.
    2017. The journal of physical chemistry <Washington, DC> / C, 121 (17), 9296–9299. doi:10.1021/acs.jpcc.6b12362
  1187. Ductilisation of tungsten (W) through cold rolling
    Reiser, J.; Bonk, S.; Bonnekoh, C.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Pippan, R.; Hoffmann, A.; Rieth, M.
    2017. 19th Plansee Seminar (2017), Reutte, Austria, May 29–June 2, 2017
  1188. Thermal behaviour of LiₓMeO₂ (Me = Co or Ni + Mn + Co) cathode materials
    Gotcu, P.; Pfleging, W.; Smyrek, P.; Seifert, H. J.
    2017. Physical chemistry, chemical physics, 19 (19), 11920–11930. doi:10.1039/C7CP00513J
  1189. CoreSOAR core degradation SOAR update: Status May 2017
    Haste, T.; Barrachin, M.; Fichot, F.; Repetto, G.; Miassoedov, A.; Steinbrück, M.; Buck, M.; Bechta, S.; Beuzet, E.; Torkham, M.; Hollands, T.; Journeau, C.; Pontillon, Y.; Lind, T.; Hozer, Z.; Horvath, G. L.; Bottomley, P. D. W.
    2017. 8th European Review Meeting on Severe Accident Research (ERMSAR), Warszawa, PL, May 16-18, 2017. Proceedings on USB-Stick, Paper 502
  1190. Process and parameter optimisation for micro structuring of 3D freeform metallic surfaces: A comparative study of short-pulse (nanosecond) and ultrafast (picosecond, femtosecond) laser ablation
    Scholz, S. G.; Sampaio, D. J. B. S.; Mangang, M.; Pfleging, W.
    2017. Laser Resonators, Microresonators, and Beam Control XIX 2017, San Francisco, United States, 30. - 2. February, 2017, Art.Nr.: 100920E, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2252044
  1191. Fabrication and characterization of silicon-based 3D electrodes for high-energy lithium-ion batteries
    Zheng, Y.; Smyrek, P.; Rakebrandt, J.-H.; Kübel, C.; Seifert, H. J.; Pfleging, W.
    2017. Laser-based Micro- and Nanoprocessing XI, San Francisco, CA, January 31 - February 2. Ed.: U. Klotzbach, Art.Nr.: 100920L, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2251374
  1192. Laser processing of thick Li(NiMnCo)O2 electrodes for lithium-ion batteries
    Rakebrandt, J.-H.; Smyrek, P.; Zheng, Y.; Seifert, H. J.; Pfleging, W.
    2017. Laser Resonators, Microresonators, and Beam Control XIX 2017, San Francisco, United States, 30. - 2. February, 2017, Art.Nr.: 100920M, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2252093
  1193. Investigation of micro-structured Li(Ni1/3Mn1/3Co1/3)O2 cathodes by laser-induced breakdown spectroscopy
    Smyrek, P.; Zheng, Y.; Rakebrandt, J.-H.; Seifert, H. J.; Pfleging, W.
    2017. Laser Resonators, Microresonators, and Beam Control XIX 2017, San Francisco, United States, 30. - 2. February, 2017, Art.Nr.: 100920S, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2253894
  1194. Update of the cooling design of the ITER EC upper launcher
    Spaeh, P.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2017. Fusion engineering and design, 123, 341–344. doi:10.1016/j.fusengdes.2017.04.092
  1195. Rare earth (RE: Nd, Dy, Ho, Y, Yb, and Sc) aluminosilicates for joining silicon carbide components
    Herrmann, M.; Ahmad, S.; Lippmann, W.; Seifert, H.-J.; Hurtado, A.
    2017. International journal of applied ceramic technology, 14 (4), 675–691. doi:10.1111/ijac.12692
  1196. Oxidation of Zircaloy-4 in steam-nitrogen mixtures at 600–1200 °C
    Steinbrück, M.; Silva, F. O. da; Grosse, M.
    2017. Journal of nuclear materials, 490, 226–237. doi:10.1016/j.jnucmat.2017.04.034
  1197. Effect of microstructural anisotropy on fracture toughness of hot rolled 13Cr ODS steel – The role of primary and secondary cracking
    Das, A.; Viehrig, H. W.; Bergner, F.; Heintze, C.; Altstadt, E.; Hoffmann, J.
    2017. Journal of nuclear materials, 491, 83–93. doi:10.1016/j.jnucmat.2017.04.059
  1198. Investigation of the Li solubility in the intermediate phase Li17Sn4 relevant to understanding lithiation mechanisms in Sn-based anode materials
    Reichmann, T. L.; Gebert, C.; Cupid, D. M.
    2017. Journal of alloys and compounds, 714, 593–602. doi:10.1016/j.jallcom.2017.04.232
  1199. Diamond windows diagnostics for fusion reactors - Updates of the design
    Mazzocchi, F.; Schreck, S.; Strauss, D.; Aiello, G.; Meier, A.; Scherer, T.
    2017. Fusion engineering and design, 123, 820–824. doi:10.1016/j.fusengdes.2017.04.012
  1200. The interface in molybdenum-copper-composites used for thermal management applications
    Seiss, M.; Mrotzek, T.; Jäntsch, U.; Klimenkov, M.; Reiser, J.; Knabl, W.
    2017. 33rd Annual Semiconductor Thermal Measurement and Management Symposium, SEMI-THERM 2017, Double Tree Hotel San Jose, United States, 13. - 17. März 2017, 246–251, IEEE Computer Society. doi:10.1109/SEMI-THERM.2017.7896937
  1201. Microstructure, mechanical properties and friction behavior of magnetron-sputtered V-C coatings
    Stoyanov, P.; Schneider, J.; Rinke, M.; Ulrich, S.; Nold, E.; Dienwiebel, M.; Stüber, M.
    2017. Surface and coatings technology, 321, 366–377. doi:10.1016/j.surfcoat.2017.04.050
  1202. CoreSOAR core degradation SOAR update: Status May 2017
    Haste, T.; Barrachin, M.; Fichot, F.; Repetto, G.; Miassoedov, A.; Steinbrück, M.; Buck, M.; Bechta, S.; Beuzet, E.; Torkham, M.; Hollands, T.; Journeau, C.; Pontillon, Y.; Lind, T.; Hozer, Z.; Horvath, G. L.; Bottomley, P. D. W.
    2017. 8th European Review Meeting on Severe Accident Research (ERMSAR), Warszawa, PL, May 16-18, 2017
  1203. Structural evolution in reactive RF magnetron sputtered (Cr,Zr)₂O₃ coatings during annealing
    Landälv, L.; Lu, J.; Spitz, S.; Leiste, H.; Ulrich, S.; Johansson-Jõesaar, M. P.; Ahlgren, M.; Göthelid, E.; Alling, B.; Hultman, L.; Stüber, M.; Eklund, P.
    2017. Acta materialia, 131, 543–552. doi:10.1016/j.actamat.2017.03.063
  1204. Oxidation behavior of Ti 2 AlC in the temperature range of 1400 °C–1600 °C in steam
    Tang, C.; Steinbrück, M.; Große, M.; Bergfeldt, T.; Seifert, H. J.
    2017. Journal of nuclear materials, 490, 130–142. doi:10.1016/j.jnucmat.2017.03.016
  1205. Standard enthalpy of reaction for the reduction of Co₃O₄ to CoO
    Mayer, N. A.; Cupid, D. M.; Adam, R.; Reif, A.; Rafaja, D.; Seifert, H. J.
    2017. Thermochimica acta, 652, 109–118. doi:10.1016/j.tca.2017.03.011
  1206. Liquid Metals as Efficient High-Temperature Heat-Transport Fluids
    Heinzel, A.; Hering, W.; Konys, J.; Marocco, L.; Litfin, K.; Müller, G.; Pacio, J.; Schroer, C.; Stieglitz, R.; Stoppel, L.; Weisenburger, A.; Wetzel, T.
    2017. Energy technology, 5 (7), 1026–1036. doi:10.1002/ente.201600721
  1207. ITER core CXRS diagnostic : Assessment of different optical designs with respect to neutronics criteria
    Weinhorst, B.; Fischer, U.; Grossetti, G.; Mertens, P. H.; Bardawil, D. A. C.
    2017. Fusion engineering and design, 123, 927–931. doi:10.1016/j.fusengdes.2017.03.061
  1208. The behaviour of arcs in carbon mixed-mode high-power impulse magnetron sputtering
    Tucker, M. D.; Putman, K. J.; Ganesan, R.; Lattemann, M.; Stueber, M.; Ulrich, S.; Bilek, M. M. M.; McKenzie, D. R.; Marks, N. A.
    2017. Journal of physics / D, 50 (14), 145205. doi:10.1088/1361-6463/aa5bcf
  1209. Corrosion in austenitic steels and nickel-based alloys caused by liquid tin at high temperature
    Emmerich, T.; Schroer, C.
    2017. Corrosion science, 120, 171–183. doi:10.1016/j.corsci.2017.02.025
  1210. Process and parameter optimisation for micro structuring of 3d freeform metallic surfaces - a comparative study of short-pulse (nanosecond) and ultrafast (picosecond, femtosecond) laser ablation
    Scholz, S. G.; Sampaio, D. J. B. S.; Mangang, M.; Pfleging, W.
    2017. SPIE Photonics West, San Francisco, CA, January 28 - February 2, 2017
  1211. Bonding of flexible multilayer printed systems based on PET-substrates. An investigation of challenges and promising approaches
    Koker, L.; Paul, A.; Kinay, D.; Rakebrandt, J.-H.; Besser, H.; Moser, D.; Ungerer, M.; Gengenbach, U.
    2017. ACHI 2017 : 10th International Conference on Advances in Computer-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 215–221, International Academy, Research, and Industry Association (IARIA)
  1212. Bonding of flexible multilayer printed systems based on PET-substrates. An investigation of challenges and promising approaches
    Koker, L.; Paul, A.; Kinay, D.; Rakebrandt, J.-H.; Besser, H.; Moser, D.; Ungerer, M.; Gengenbach, U.
    2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nice, France, March 19–23, 2017
  1213. Micromechanical study on the deformation behavior of directionally solidified NiAl–Cr eutectic composites
    Kumar, A.; Ensslen, C.; Krüger, A.; Klimenkov, M.; Kraft, O.; Schwaiger, R.
    2017. Journal of materials research, 32 (11), 2127–2134. doi:10.1557/jmr.2017.23
  1214. Investigation of different analysis methods for the nuclear heating of the electron cyclotron-heating upper launcher blanket shield module
    Weinhorst, B.; Fischer, U.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyoto, Japan, September 25–29, 2017
  1215. Production, microstructure and mechanical properties of two different austenitic ODS steels
    Gräning, T.; Rieth, M.; Hoffmann, J.; Möslang, A.
    2017. Journal of nuclear materials, 487, 348–361. doi:10.1016/j.jnucmat.2017.02.034
  1216. Mechanical analyses of the ITER electron cyclotron upper launcher first confinement system
    Mas Sánchez, A.; Aiello, G.; Chavan, R.; Gagliardi, M.; Goodman, T.; Henderson, M.; Landis, J.-D.; Saibene, G.; Santos Silva, P.; Vaccaro, A.
    2017. Fusion engineering and design, 123, 458–462. doi:10.1016/j.fusengdes.2017.02.105
  1217. Heating & current drive efficiencies, TBR and RAMI considerations for DEMO
    Franke, T.; Agostinetti, P.; Avramidis, K.; Bader, A.; Bachmann, C.; Biel, W.; Bolzonella, T.; Ciattaglia, S.; Coleman, M.; Cismondi, F.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Jenkins, I.; Kalsey, M.; Kembleton, R.; Mantel, N.; Noterdaeme, J.-M.; Rispoli, N.; Simonin, A.; Sonato, P.; Tran, M. Q.; Vincenzi, P.; Wenninger, R.
    2017. Fusion engineering and design, 123, 495–499. doi:10.1016/j.fusengdes.2017.02.007
  1218. Effect of grain boundary segregation of Co or Ti on cyclic deformation of aluminium bi-crystals
    Babicheva, R. I.; Dmitriev, S. V.; Bachurin, D. V.; Srikanth, N.; Zhang, Y.; Kok, S. W.; Zhou, K.
    2017. International journal of fatigue, 102, 270–281. doi:10.1016/j.ijfatigue.2017.01.038
  1219. The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation
    Pfeifenberger, M. J.; Mangang, M.; Wurster, S.; Reiser, J.; Hohenwarter, A.; Pfleging, W.; Kiener, D.; Pippan, R.
    2017. Materials and design, 121, 109–118. doi:10.1016/j.matdes.2017.02.012
  1220. Stability and clusterization of hydrogen-vacancy complexes in B2-FeAl: insight from hydrogen embrittlement
    Zhang, G.; Huang, G.; Hu, M.; Yang, F.; Liu, L.; Konys, J.; Tang, T.
    2017. RSC Advances, 7 (18), 11094–11100. doi:10.1039/c6ra27936h
  1221. Quantum mechanically guided design of amorphous Si–Al–M (M = 3d metals) anodes for Li ion batteries
    Chang, K.; Music, D.; Strafela, M.; Ulrich, S.; Schneider, J. M.
    2017. Solid state ionics, 303, 47–51. doi:10.1016/j.ssi.2017.02.011
  1222. Evaluation of liquid tin corrosion on austenitic steels as well as nickel-based alloys and first test on possible protective surface layers at high temperature
    Emmerich, T.; Schroer, C.
    2017. 7th Annual Congress on Materials Research and Technology, Berlin, February 20-21, 2017
  1223. DEMO EC system preliminary conceptual design
    Garavaglia, S.; Aiello, G.; Alberti, S.; Avramidis, K.; Bruschi, A.; Chelis, I. G.; Franck, J.; Gantenbein, G.; Granucci, G.; Grossetti, G.; Hizanidis, K.; Illy, S.; Jelonnek, J.; Kalaria, P.; Moro, A.; Pagonakis, I.; Peponis, D. V.; Poli, E.; Rispoli, N.; Ruess, S.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Tigelis, I.; Tsironis, C.; Wu, C.; Franke, T.; Tran, M. Q.
    2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT 2017), Kyoto, Japan, September 25–29, 2017
  1224. New H&CD designs and impact of the configurations on the performances for the EU DEMO fusion power plant reactor
    Franke, T.; Agostinetti, P.; Aiello, G.; Avramidis, K.; Bachmann, C.; Federici, G.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Noterdaeme, J. M.; Simonin, A.; Scherer, T.; Sonato, P.; Strauss, D.; Tran, M. Q.; Vincenzi, P.; Wenninger, R.; Zheng, S.
    2017. 27th IEEE Symposium on Fusion Engineering (SOFE), Shanghai, China, June 4-8, 2017
  1225. Instability of vibrational modes in hexagonal lattice
    Korznikova, E. A.; Bachurin, D. V.; Fomin, S. Y.; Chetverikov, A. P.; Dmitriev, S. V.
    2017. The European physical journal / B, 90 (2), Art. Nr.: 23. doi:10.1140/epjb/e2016-70595-2
  1226. Validation of ASTECV2.1 based on the QUENCH-08 experiment
    Gómez-García-Toraño, I.; Sánchez-Espinoza, V.-H.; Stieglitz, R.; Stuckert, J.; Laborde, L.; Belon, S.
    2017. Nuclear engineering and design, 314, 29–43. doi:10.1016/j.nucengdes.2016.12.039
  1227. The Li-Sb phase diagram part II: Calorimetry and thermodynamic assessment
    Li, D.; Beutl, A.; Flandorfer, H.; Cupid, D. M.
    2017. Journal of alloys and compounds, 701, 186–199. doi:10.1016/j.jallcom.2016.12.399
  1228. Localized vibrational modes in diamond
    Murzaev, R. T.; Bachurin, D. V.; Korznikova, E. A.; Dmitriev, S. V.
    2017. Physics letters / A, 381 (11), 1003–1008. doi:10.1016/j.physleta.2017.01.014
  1229. The Li-Sb phase diagram part I: New experimental results
    Beutl, A.; Cupid, D.; Flandorfer, H.
    2017. Journal of alloys and compounds, 695, 1052–1060. doi:10.1016/j.jallcom.2016.10.230
  1230. First-principles and classical molecular dynamics study of threshold displacement energy in beryllium
    Vladimirov, P. V.; Borodin, V. A.
    2017. Nuclear instruments & methods in physics research / B, 593, 195–199. doi:10.1016/j.nimb.2016.09.027
  1231. Advanced materials for a damage resilient divertor concept for DEMO : Powder-metallurgical tungsten-fibre reinforced tungsten
    Coenen, J. W.; Mao, Y.; Almanstötter, J.; Calvo, A.; Sistla, S.; Gietl, H.; Jasper, B.; Riesch, J.; Rieth, M.; Pintsuk, G.; Klein, F.; Litnovsky, A.; Mueller, A. V.; Wegener, T.; You, J.-H.; Broeckmann, C.; Garcia-Rosales, C.; Neu, R.; Linsmeier, C.
    2017. Fusion engineering and design, 124, 964–968. doi:10.1016/j.fusengdes.2016.12.006
  1232. Synthesis and characterization of Ti2AlC coatings by magnetron sputtering from three elemental targets and ex-situ annealing
    Tang, C.; Klimenkov, M.; Jaentsch, U.; Leiste, H.; Rinke, M.; Ulrich, S.; Steinbrück, M.; Seifert, H. J.; Stueber, M.
    2017. Surface and coatings technology, 309, 445–455. doi:10.1016/j.surfcoat.2016.11.090
  1233. Towards 240 GHz high power fusion gyrotrons - KIT resaerch status
    Jelonnek, J.; Aiello, G.; Avramidis, K.; Franck, J.; Gantenbein, G.; Grossetti, G.; Illy, S.; Ioannidis, Z.; Jin, J.; Kalaria, P.; Pagonakis, I.; Rzesnicki, T.; Ruess, S.; Scherer, T.; Schmid, M.; Strauss, D.; Thumm, M.; Wu, C.
    2017. 6th International Workshop on Far-Infrared Technologies (IW-FIRT 2917) and 2nd International Symposium on Development of High Power Terahertz Science and Technology (DHP-TST 2017), Fukui, J, March 7-9, 2017
  1234. Integrated Research as Key to the Development of a Sustainable Geothermal Energy Technology
    Meller, C.; Bremer, J.; Ankit, K.; Baur, S.; Bergfeldt, T.; Blum, P.; Canic, T.; Eiche, E.; Gaucher, E.; Hagenmeyer, V.; Heberling, F.; Held, S.; Herfurth, S.; Isele, J.; Kling, T.; Kuhn, D.; Mayer, D.; Müller, B.; Nestler, B.; Neumann, T.; Nitschke, F.; Nothstein, A.; Nusiaputra, Y.; Orywall, P.; Peters, M.; Sahara, D.; Schäfer, T.; Schill, E.; Schilling, F.; Schröder, E.; Selzer, M.; Stoll, M.; Wiemer, H.-J.; Wolf, S.; Zimmermann, M.; Kohl, T.
    2017. Energy technology, 5 (7), 965–1006. doi:10.1002/ente.201600579
  1235. Experiments on silver-indium-cadmium control rod failure during severe nuclear accidents
    Steinbrück, M.; Stegmaier, U.; Grosse, M.
    2017. Annals of nuclear energy, 101, 347–358. doi:10.1016/j.anucene.2016.11.039
  1236. Combined electrochemical-thermal characterization and modelling of Li-ion cells to prevent thermal runaway
    Melcher, A.; Ziebert, C.; Lei, B.; Zhao, W.; Uhlmann, N.; Seifert, H. J.
    2017. 6th International Conference Thermal Management for EV/HEV, Berlin, 14.-16.02.2017
  1237. Mathematical modeling and simulation of the thermal behaviour of Li-ion cells with respect to thermal runaway
    Melcher, A.; Ziebert, C.; Seifert, H. J.
    2017. 6th International Conference Thermal Management for EV/HEV, 14.-16.02.2017, Berlin
  1238. Methodologies for electrochemical and thermal characterization of Li-ion cells to improve thermal management and prevent thermal runaway
    Ziebert, C.; Melcher, A.; Lei, B.; Zhao, W.; Uhlmann, N.; Seifert, H. J.
    2017. 6th International Conference Thermal Management for EV/HEV, Berlin, 14.-16.02.2017
  1239. Electrochemical-thermal characterization and thermal modeling for batteries
    Ziebert, C.; Melcher, A.; Lei, B.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2017. Emerging Nanotechnologies in Rechargeable Energy Storage Systems. Ed.: L. Rodriguez-Martinez, 195–229, Elsevier. doi:10.1016/B978-0-323-42977-1.00006-6
  1240. Nanostructure evolution in ODS steels under ion irradiation
    Rogozhkin, S.; Bogachev, A.; Korchuganova, O.; Nikitin, A.; Orlov, N.; Aleev, A.; Zaluzhnyi, A.; Kozodaev, M.; Kulevoy, T.; Chalykh, B.; Lindau, R.; Hoffmann, J.; Möslang, A.; Vladimirov, P.; Klimenkov, M.; Heilmaier, M.; Wagner, J.; Seils, S.
    2016. Nuclear materials and energy, 9, 66–74. doi:10.1016/j.nme.2016.06.011
  1241. Chemical compatibility of Eurofer steel with sodium-potassium NaK-78 eutectic alloy
    Abou-Sena, A.; Arbeiter, F.; Baumgaertner, S.; Boettcher, T.; Heinzel, A.; Piecha, H.; Zinn, K.
    2016. Fusion engineering and design, 103, 31–37. doi:10.1016/j.fusengdes.2015.12.006
  1242. Scaling und Ausgasung in Geothermieanlagen. Einflussfaktoren, Kinetik, Inhibitoren und technische Maßnahmen
    Canic, T.; Kuhn, D.; Bergfeldt, T.; Seibt, A.; Nowak, K.; Thorwart, K.; Wolfgramm, M.; Geisinger, W.
    2016. TIB
  1243. Impact of pretreatment conditions on defect formation during the fabrication of Al-based corrosion barriers by ECX process
    Wulf, S.-E.; Krauss, W.; Konys, J.
    2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prague, Czechia, September 5–9, 2016
  1244. Mechanical characterization of electrochemically based W – Cu joints for low-temperature heat sink application
    Krauss, W.; Lorenz, J.; Konys, J.; Gaganidze, E.
    2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prague, Czechia, September 5–9, 2016
  1245. Investigation of nanostructure phase composition and field emission properties in the Ge/Si(100) system
    Nepijko, S. A.; Sapozhnik, A. A.; Naumovets, A. G.; Kozyrev, Y. N.; Klimenkov, M.; Protsenko, S. I.; Odnodvorets, L. V.; Protsenko, I. Y.
    2016. Zurnal nano- ta elektronnoï fizyky, 8 (4), Art. Nr.: 04067. doi:10.21272/jnep.8(4(2)).04067
  1246. SAFEST Roadmap for Corium Experimental Research in Europe
    Journeau, C.; Bouyer, V.; Cassiaut-Louis, N.; Fouquart, P.; Piluso, P.; Ducros, G.; Gossé, S.; Guéneau, C.; Quaini, A.; Fluhrer, B.; Miassoedov, A.; Stuckert, J.; Steinbrück, M.; Bechta, S.; Kudinov, P.; Hozer, Z.; Guba, A.; Manara, D.; Bottomley, D.; Fischer, M.; Langrock, G.; Schmidt, H.; Kiselova, M.; Ždarek, J.
    2016. 2016 24th International Conference on Nuclear Engineering, Charlotte, North Carolina, USA, 26 June 2016, V004T14A019, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60916
  1247. Corrosion of 9% Cr ferritic/martensitic steels in flowing Pb-Bi eutectic with 10-7 mass % dissolved oxygen at 450 and 550 °C
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. 2016 24th International Conference on Nuclear Engineering, ICONE 2016; Charlotte; United States; 26 June 2016 through 30 June 2016, Volume 1, V001T03A024, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60826
  1248. Corrosion in steel T91 caused by flowing lead-bismuth eutectic at 400°C and 10-7 Mass% solved oxygen
    Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. 2016 24th International Conference on Nuclear Engineering, ICONE 2016; Charlotte; United States; 26 June 2016 through 30 June 2016, V001T03A025, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60845
  1249. The current status of the European ITER test blanket modules development
    Zmitko, M.; Vallory, J.; Carin, Y.; Poitevin, Y.; Calvo Plaza, F. J.; Sadaba, S.; Gil, A.; Thomas, N.; Li Puma, A.; Forest, L.; Aiello, G.; Cogneau, L.; Rey, J.; Neuberger, H.; Vladimirov, P.; Chakin, V.; Knitter, R.; Aktaa, J.; Gaganidze, E.; Magielsen, L.; Fedorov, A.
    2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prague, Czechia, September 5–9, 2016
  1250. Choice of a low operating temperature for the DEMO EUROFER97 divertor cassette
    Mazzone, G.; Aktaa, J.; Bachmann, C.; De Meis, D.; Frosi, P.; Gaganidze, E.; Di Gironimo, G.; Mariano, G.; Marzullo, D.; Porfiri, M. T.; Rieth, M.; Villari, R.; You, J. H.
    2016. Fusion engineering and design, 124, 655–658. doi:10.1016/j.fusengdes.2017.02.013
  1251. Ionic conductivity and stability of the lithium aluminum germanium phosphate
    Cui, Y.; Rohde, M.; Reichmann, T.; Mahmoud, M.; Ziebert, C.; Seifert, H. J.
    2016. 229th ECS Meeting : Joint General Session : Batteries and Energy Storage -and- Fuel Cells, Electrolytes, and Energy Conversion. San Diego, CA, May 29 -June 2, 2016, 139–146, ECS. doi:10.1149/07208.0139ecst
  1252. Ductilisation of tungsten (W): On the increase of strength AND room-temperature tensile ductility through cold-rolling
    Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Bonk, S.; Bonnekoh, C.; Hoffmann, A.; Mrotzek, T.; Rieth, M.
    2016. International journal of refractory metals & hard materials, 64, 261–278. doi:10.1016/j.ijrmhm.2016.10.018
  1253. Damage production in atomic displacement cascades in beryllium
    Borodin, V. A.; Vladimirov, P. V.
    2016. Nuclear materials and energy, 9, 216–220. doi:10.1016/j.nme.2016.07.001
  1254. Mechanical performance of SiC three-layer cladding in PWRs
    Angelici Avincola, V.; Guenoun, P.; Shirvan, K.
    2016. Nuclear engineering and design, 310, 280–294. doi:10.1016/j.nucengdes.2016.10.008
  1255. Experimental investigation of high He/dpa microstructural effects in neutron irradiated B-alloyed Eurofer97 steel by means of small angle neutron scattering (SANS) and electron microscopy
    Coppola, R.; Klimenkov, M.; Möslang, A.; Lindau, R.; Valli, M.
    2016. Nuclear materials and energy, 9, 194–198. doi:10.1016/j.nme.2016.09.013
  1256. Experimental investigation and thermodynamic modeling of the Al-Cr-Mo-Ni system and its sub-systems. PhD dissertation
    Peng, J.
    2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000064955
  1257. Extension of the multi-frequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Munich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2016. 41st International Conference on Infrared, Millimeter, and Terahertz waves (IRMMW-THz), Copenhagen, Denmark, 25–30 September 2016, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2016.7758412
  1258. Investigation of a broadband double-disc diamond window unit
    Vaccaro, A.; Meier, A.; Stober, J.; Wagner, D.; Scherer, T. A.
    2016. 41st International Conference on Infrared, Millimeter, and Terahertz waves (IRMMW-THz), Copenhagen, Denmark, 25–30 September 2016, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2016.7758513
  1259. Experimental investigation and thermodynamic re-assessment of the Al–Mo–Ni system
    Peng, J.; Franke, P.; Manara, D.; Watkins, T.; Konings, R. J. M.; Seifert, H. J.
    2016. Journal of alloys and compounds, 674, 305–314. doi:10.1016/j.jallcom.2016.03.044
  1260. Comments on A numerical method to determine interdiffusion coefficients of Cu6Sn5 and Cu3Sn intermetallic compounds
    Yuan, Y.; Li, D.; Moelans, N.
    2016. Intermetallics, 69, 95–97. doi:10.1016/j.intermet.2015.10.015
  1261. Effect of hydrogen on equilibrium shape of gas bubbles in beryllium
    Bachurin, D.; Vladimirov, P.
    2016. 12th International Workshop on Beryllium Technology (BeWS-12), Jeju, South Korea, 10-11 September, 2015. Ed.: K. Jae-Hwan, 118–130, Nihon Genshiryoku Kenkyū Kaihatsu Kikō. doi:10.11484/jaea-review-2015-044
  1262. Evolution of microstructure in advanced ferritic-martensitic steels under irradiation : the origin of low temperature radiation embrittlement
    Rogozhkin, S.; Nikitin, A.; Orlov, N.; Bogachev, A.; Korchuganova, O.; Aleev, A.; Zaluzhnyi, A.; Kulevoy, T.; Lindau, R.; Möslang, A.; Vladimirov, P.
    2016. MRS advances, 2 (21-22), 1143–1155. doi:10.1557/adv.2016.657
  1263. Transmission electron microscopy investigation of oxidation of (110)NiAl single crystal with wedge-shaped profile
    Fedchenko, O.; Chernov, S. V.; Klimenkov, M.; Protsenko, S. I.; Nepijko, S. A.; Schönhense, G.
    2016. Japanese journal of applied physics, 55 (2), Art.Nr.: 02BC15. doi:10.7567/JJAP.55.02BC15
  1264. Neutron irradiated ferritic-martensitic 9Cr steels: Effect of helium and nanoscaled ODS particles on microstructure, tensile and fatigue properties
    Möslang, A.; Gaganidze, E.; Klimenkov, M.; Lindau, R.; Rolli, R.; Schneider, H. C.
    2016. 2016 MRS Fall Meeting & Exhibit, Symposium ES5, November 27 – December 2 2016, Boston, USA
  1265. The role of processing parameters on the Microstructure of ferritic ODS alloys
    Hoffmann, J.
    2016. 3rd Odisseus Workshop, Dresden, April 19-20, 2016
  1266. Tungsten for Divertor Components - Manufacturing and improving the performance of Tungsten
    Hoffmann, J.; Reiser, J.; Antusch, M.; Bonk, S.; Bonnekoh, C.
    2016. European Student Divertor Research Workshop, Oxford, UK, September 26-28, 2016
  1267. Improvement of reduced activation 9%Cr steels by ausforming
    Hoffmann, J.; Rieth, M.; Commin, L.; Fernández, P.; Roldán, M.
    2016. Nuclear materials and energy, 6, 12–17. doi:10.1016/j.nme.2015.12.001
  1268. Temperature-dependent EXAFS study of the local structure and lattice dynamics in cubic Y2O3
    Jonane, I.; Lazdins, K.; Timoshenko, J.; Kuzmin, A.; Purans, J.; Vladimirov, P.; Graening, T.; Hoffmann, J.
    2016. Journal of synchrotron radiation, 23 (2), 510–518. doi:10.1107/S1600577516001181
  1269. Long-term corrosion behavior of ODS-Eurofer in flowing Pb-15.7Li at 550°C
    Krauss, W.; Wulf, S.-E.; Konys, J.
    2016. Nuclear materials and energy, 9, 512–518. doi:10.1016/j.nme.2016.04.011
  1270. Laser interference patterning and laser-induced periodic surface structure formation on metallic substrates
    Zheng, Y.; An, Z.; Smyrek, P.; Kunze, T.; Lang, V.; Lasagni, A. F.; Seifert, H. J.; Pfleging, W.
    2016. 6th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M - NANO), Chongqing, China, 18–22 July 2016
  1271. 3D battery
    Pfleging, W.
    2016. International Conference IEEE 3M-NANO, 18-22 July 2016, Chongqing, China
  1272. Laser-Induced Breakdown Spectroscopy as a Powerful Tool for Characterization of Laser Modified Composite Materials
    Smyrek, P.; Zheng, Y.; Seifert, H. J.; Pfleging, W.
    2016. 6th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), Chongqing, China, 18-22 July 2016
  1273. Tritium and helium release from beryllium pebbles neutron-irradiated up to 230appm tritium and 3000appm helium
    Chakin, V.; Rolli, R.; Vladimirov, P.; Moeslang, A.
    2016. Nuclear materials and energy, 9, 207–215. doi:10.1016/j.nme.2016.07.007
  1274. Ab initio modelling of Y–O cluster formation in γ-Fe lattice
    Gopejenko, A.; Zhukovskii, Y. F.; Kotomin, E. A.; Mastrikov, Y. A.; Vladimirov, P. V.; Borodin, V. A.; Möslang, A.
    2016. Physica status solidi / B, 253 (11), 2136–2143. doi:10.1002/pssb.201600472
  1275. Effect of post-weld heat treatment on microstructure, hardness and low-temperature impact toughness of electron beam welds of NIFS-HEAT-2 and CEA-J57 heats of V–4Ti–4Cr alloy
    Tsisar, V.; Nagasaka, T.; Flem, M. L.; Yeliseyeva, O.; Konys, J.; Muroga, T.
    2016. Nuclear materials and energy, 9, 436–440. doi:10.1016/j.nme.2016.04.002
  1276. Structural evolution in reactive r.f. magnetron sputtered (Cr,Zr)2O3 coatings upon annealing
    Landälv, L.; Lu, J.; Spitz, S.; Leiste, H.; Ulrich, S.; Johansson-Joesaar, M.; Ahlgren, M.; Göthelid, E.; Alling, B.; Hultman, L.; Stüber, M.; Eklund, P.
    2016. Conference on Advanced Functional Materials (AFM 2016), Norrköping, S, August 23-24, 2016
  1277. Structural evolution in reactive r.f. magnetron sputtered (Cr,Zr)2O3 coatings upon annealing
    Landälv, L.; Lu, J.; Spitz, S.; Leiste, H.; Ulrich, S.; Johansson-Joesaar, M.; Ahlgren, M.; Göthelid, E.; Alling, B.; Hultman, L.; Stüber, M.; Eklund, P.
    2016. 15th International Conference on Plasma Surface Engineering (PSE 2016), Garmisch-Partenkirchen, 12.-16.09.2016
  1278. Amorphous carbon, DLC and carbon based nanostructured composite coatings – a resume of selected thin film design and process approaches
    Stüber, M.
    2016. 43rd International Conference on Metallurgical Coatings and Thin Films 2016 (ICMCTF 2016), San Diego, CA, April 25-29, 2016
  1279. Orientation relationships of delta hydrides in zirconium and Zircaloy-4
    Pshenichnikov, A.; Stuckert, J.
    2016. 24th International Conference on Nuclear Engineering, ICONE 2016; Charlotte; United States; 26 June 2016 through 30 June 2016. Volume 1, V001T02A006, The American Society of Mechanical Engineers (ASME). doi:10.1115/ICONE24-60061
  1280. High temperature oxidation behavior of Kanthal APM and D alloys in steam
    Tang, C.; Steinbrück, M.; Grosse, M.; Jianu, A.; Weisenburger, A.; Seifert, H. J.
    2016. International Congress on Advances in Nuclear Power Plants (ICAPP 2016), San Francisco, CA, April 17-20, 2016. Proceedings on CD-ROM, 2112–2119, American Nuclear Society (ANS)
  1281. Polarimetric measurements for fusion plasma diagnostics. A challenge for superconducting detector devices
    Mazzocchi, F.; Scherer, T.
    2016. Workshop "Kryoelektronische Bauelemente" (KRYO 2016), Freyburg, Germany, October 9–11, 2016
  1282. Diamond window for the ITER EC-H&CD upper launcher status of design, testing and qualification
    Aiello, G.; Grossetti, G.; Mazzocchi, F.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauß, D.; Vaccaro, A.
    2016. Workshop on RF Heating Technology of Fusion Plasmas, Leinsweiler, September 21-23, 2016
  1283. Design validation of the ITER EC H&CD upper launcher’s components
    Spaeh, P.; Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauß, D.; Vaccaro, A.; Weinhorst, B.
    2016. Workshop on RF Heating Technology of Fusion Plasmas, Leinsweiler, September 21-23, 2016
  1284. Design validation of the ITER EC H&CD upper launcher’s components
    Vaccaro, A.; Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauß, D.; Weinhorst, B.
    2016. Workshop on RF Heating Technology of Fusion Plasmas, Leinsweiler, September 21-23, 2016
  1285. Design status of the ITER EC H&CD upper launcher
    Strauß, D.; Aiello, G.; Bruschi, A.; Chavan, R.; Farina, D.; Figini, L.; Gagliardi, M.; Geli, F.; Goodman, T. P.; Grossetti, G.; Heemskerk, C.; Henerson, M. A.; Kasparek, W.; Koning, J.; Landis, J. D.; Meier, A.; Moro, A.; Novak, S.; Platania, P.; Plaum, B.; Poli, E.; Ronden, D.; Saibene, G.; Sanchez, A.; Santos Silva, P.; Sauter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Sudki, B.; Vaccaro, A.; Weinhorst, B.
    2016. Workshop on RF Heating Technology of Fusion Plasmas, Leinsweiler, September 21-23, 2016
  1286. THz technology: Ideas and considerations on possible diagnostics applications
    Scherer, T.; Mazzocchi, F.
    2016. Workshop on RF Heating Technology of Fusion Plasmas, Leinsweiler, September 21-23, 2016
  1287. Progress in Eurofusion on gyrotron R&D and advanced developments for DEMO
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K. A.; Braunmüller, F.; Chelis, I.; Franck, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ioannidis, Z.; Jin, J.; Kalaria, P.; Pagonakis, G.; Peponis, D.; Rzesnicki, T.; Ruess, S.; Scherer, T.; Strauß, D.; Thumm, M.; Tigelis, I.; Tran, M. Q.; Wu, C.; Zhang, J.
    2016. Workshop on RF Heating Technology of Fusion Plasmas, Leinsweiler, September 21-23, 2016
  1288. The status of the millimeter wave components of the ITER upper launcher
    Bruschi, A.; Farina, D.; Figini, L.; Moro, A.; Platania, P.; Sozzi, C.; Ronden, D.; Heemskerk, C.; Poli, E.; Aiello, G.; Grossetti, G.; Scherer, T.; Schreck, S.; Späh, P.; Strauß, D.; Vaccaro, A.; Weinhorst, B.; Chavan, R.; Landis, J. D.; Mas Sanchez, A.; Santos Silva, P.; Schlatter, C.; Sudki, B.
    2016. Workshop on RF Heating Technology of Fusion Plasmas, Leinsweiler, September 21-23, 2016
  1289. Status of the ECRH system at ASDEX upgrade
    Wagner, D.; Scherer, T.
    2016. 28th Joint Russian-German Meeting on ECRH and Gyrotrons, Nizhny Novgorod, Russia, June 27 - July 3, 2016
  1290. Recent developments in ECRH window technology
    Scherer, T.
    2016. 28th Joint Russian-German Meeting on ECRH and Gyrotrons, Nizhny Novgorod, Russia, June 27 - July 3, 2016
  1291. Integration of ITER upper launcher in-vessel microwave components
    Spaeh, P.; Scherer, T.
    2016. 28th Joint Russian-German Meeting on ECRH and Gyrotrons, Nizhny Novgorod, Russia, June 27 - July 3, 2016
  1292. Double-disc diamond windows for high-power mm-waves applications
    Vaccaro, A.; Aiello, G.; Grossetti, G.; Mazzocchi, F.; Meier, A.; Schreck, S.; Spaeh, P.; Stober, J.; Strauss, D.; Wagner, D.; Scherer, T.
    2016. 10th International Conference on New Diamond and Nano Carbons (NDNC 2016), Xi’an, China, May 22-26, 2016
  1293. Dielectric properties of artificial-grown polycrystalline diamond for microwave applications
    Schreck, S.; Aiello, G.; Grossetti, G.; Mazzocchi, F.; Meier, A.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Scherer, T.
    2016. 10th International Conference on New Diamond and Nano Carbons (NDNC 2016), Xi’an, China, May 22-26, 2016
  1294. Steels for nuclear fusion reactors
    Rieth, M.
    2016. OCAS Seminar ’Steels for Future Nuclear Power Plants’. Ghent. B, October 11, 2016
  1295. Experimental and modeling problems in the system Co-O
    Mayer, N. A.
    2016. 30th Annual MSIT Meeting, January 31- February 5, Schloss Ringberg, Germany
  1296. Correlation between thermochemistry and electrochemistry for the conversion mechanism in transition metal oxide based anode materials
    Mayer, N. A.
    2016. WeNDeLIB Final Colloquium Priority Programme 1473, November 23-25, 2016, Eggenstein-Leopoldshafen
  1297. Thermodynamic Investigation of Cobalt-Oxide based Material Systems for Lithium-Ion Batteries
    Mayer, N. A.; Gotcu-Freis, P.; Cupid, D. M.; Seifert, H. J.
    2016. WeNDeLIB Final Colloquium Priority Programme 1473, November 23-25, 2016, Eggenstein-Leopoldshafen
  1298. Experimental investigations and modeling in the Li-Co-O lithium-ion battery system
    Mayer, N. A.; Gotcu-Freis, P.; Cupid, D. M.; Seifert, H. J.
    2016. Materials Science and Engineering Congress, September 27-29, 2016, Darmstadt (Germany)
  1299. Thermodynamic Investigation of Cobalt-Oxide based Material Systems for Lithium-Ion Batteries
    Mayer, N. A.; Gotcu-Freis, P.; Reichmann, T. L.; Lepple, M.; Cupid, D. M.; Seifert, H. J.
    2016. 18th International Meeting on Lithium Batteries, June 19 to 24, 2016, Chicao, Illinois
  1300. Laser-Induced Breakdown Spectroscopy as a Powerful Tool for Characterization of Laser Modified Composite Materials
    Smyrek, P.; Zheng, Y.; Seifert, H. J.; Pfleging, W.
    2016. 6th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, (3M-NANO) 18-22 July 2016, Chongqing, China, 164–167, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2016.7824954
  1301. Laser Interference Patterning and Laser-induced Periodic Surface Structure Formation on Metallic Substrates
    Zheng, Y.; Smyrek, P.; Seifert, H. J.; Kunze, T.; Lang, V.; Pfleging, W.
    2016. 6th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, (3M-NANO) Chongqing, China, 18-22 July 2016, 159–163, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2016.7824955
  1302. Laser processes and analytics for high power 3D battery materials
    Pfleging, W.; Mangang, M.; Bruns, M.; Zheng, Y.; Smyrek, P.
    2016. Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVI. Ed.: A. Heisterkamp, 974013, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2212041
  1303. Laser Processing - Production of Lithium-Ion Batteries
    Pfleging, W.; Mangang, M.; Zheng, Y.; Smyrek, P.; Pröll, J.
    2016. LIA today, 24 (2), 12–15
  1304. The Friction Reducing Effect of Square-Shaped Surface Textures under Lubricated Line-Contacts—An Experimental Study
    Lu, P.; Wood, R.; Gee, M.; Wang, L.; Pfleging, W.
    2016. Lubricants, 4 (3), 26. doi:10.3390/lubricants4030026
  1305. Laser structuring for improved battery performance
    Pfleging, W.; Mangang, M.; Zheng, Y.; Smyrek, P.
    2016. SPIE newsroom. doi:10.1117/2.1201602.006342
  1306. Industrial applications of ultrafast laser processing
    Mottay, E.; Liu, X.; Zhang, H.; Mazur, E.; Sanatinia, R.; Pfleging, W.
    2016. MRS bulletin, 41 (12), 984–992. doi:10.1557/mrs.2016.275
  1307. Towards ASTEC Modelling of the QUENCH-LOCA-1 Experiment
    Muscher, H.
    2016. 22nd International QUENCH Workshop, Karlsruhe Institute of Technology, October 18-20, 2016
  1308. Ductilisation of tungsten through cold rolling: Change of brittle to ductile transition temperature (BDTT) in high deformed tungsten
    Bonnekoh, C.; Reiser, J.; Bonk, S.; Hoffmann, J.
    2016. SFB-TR 103 Young Researchers Interaction Week, Irsee, December 6, 2016
  1309. Electrochemical-thermal characterization and thermal modeling of Li-ion cells
    Melcher, A.; Ziebert, C.; Lei, B.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2016. 5th International Conference Thermal Management for EV/HEV, Berlin, 16.-18.02.2016
  1310. Thermal and ionic conductivity studies of lithium aluminum germanium phosphate solid-state electrolyte
    Cui, Y.; Mahmoud, M. M.; Rohde, M.; Ziebert, C.; Seifert, H. J.
    2016. Solid state ionics, 289, 125–132. doi:10.1016/j.ssi.2016.03.007
  1311. Investigation and impact of the uniaxial anisotropy formation on the magnetisation dynamics in Fe-Co-Zr-N nanocomposite films for temperature sensor applications
    Seemann, K.; Beirle, S.; Leiste, H.
    2016. 11th European Magnetic Sensors and Actuators Conference (EMSA), Turin, Italy, 12.-15. Juli 2016
  1312. Parametrierung von Lithium-Ionen-Zellen auf Basis von CIT-Messungen
    Gulbins, M.; Melcher, A.; Ziebert, C.; Lei, B.; Markwirth, T.; Haase, J.
    2016. ASIM-Treffen STS/GMMS : Workshop der ASIM/GI Fachgruppen STS und GMMS, Lippstadt, 10.-11. März 2016. Hrsg.: D. Tikhomirov, 37–44, ARGESIM
  1313. Modellierung und Simulation des thermischen Runaways in zylindrischen Li-Ionen Batterien
    Melcher, A.; Ziebert, C.; Lei, B.; Zhao, W.; Rohde, M.; Seifert, H. J.
    2016. D. Tikhomiriv, H.-Th. Mammen, Th. Pawletta, Hrsg. ARGESIM Report 51, ASIM Mitteilung AM 158, 8–28, ARGESIM Verlag
  1314. Lattice stability of metastable AlN and wurtzite-to-rock-salt structural transformation by CALPHAD modeling
    Zhang, Y.; Franke, P.; Li, D.; Seifert, H. J.
    2016. Materials chemistry and physics, 184, 233–240. doi:10.1016/j.matchemphys.2016.09.046
  1315. Deposition and high-temperature steam oxidation behavior of Ti₂AlC coated zircaloy-4
    Tang, C.; Stüber, M.; Steinbrück, M.; Große, M.; Ulrich Sven; Seifert, H. J.
    2016. 16th International QUENCH Workshop (2010), Karlsruhe, Germany, November 16–18, 2010
  1316. Investigation of diffusion behavior in Cu-Sn solid state diffusion couples
    Yuan, Y.; Guan, Y.; Li, D.; Moelans, N.
    2016. Journal of alloys and compounds, 661, 282–293. doi:10.1016/j.jallcom.2015.11.214
  1317. Thermodynamic modelling of high-temperature oxidation of SiC CMC materials
    Markel, I. J.; Avincola, V. A.; Cupid, D. M.; Steinbrück, M.; Seifert, H. J.
    2016. 22nd International QUENCH Workshop, Karlsruhe Institute of Technology, October 18-20, 2016
  1318. Thermodynamic calculations in the Y-Si-C-O-H system - Phase stability and corrosion resistance of YttriumSilicate EBCs on SiC in moist atmosphere
    Markel, I. J.; Cupid, D. M.; Steinbrück, M.; Seifert, H. J.
    2016. Materials Science and Engineering MSE, September 27-29 2016, Darmstadt, Germany
  1319. Thermodynamic calculations in the Y-Si-C-O-H system for yttrium silicate based EBCs
    Markel, I. J.; Cupid, D. M.; Steinbrück, M.; Seifert, H. J.
    2016. 9th International Conference on high Temperature ceramic matrix composites - HTCMC9, Toronto, Ontario Canada, June 26-July 1, 2016
  1320. Numerical study of the effects of surface roughness on water disinfection UV reactor
    Sultan, T.; Ahmad, S.; Cho, J.
    2016. Chemosphere, 148, 108–117. doi:10.1016/j.chemosphere.2016.01.005
  1321. Re-investigation of the Cd-Ce Phase Diagram and Structural Characterization of the High-Temperature Phase Cd17+2xCe2−x (x ~ 0.02)
    Skoyszewska-Kühberger, B.; Reichmann, T. L.; Marker, M. C. J.; Effenberger, H. S.; Ipser, H.
    2016. Journal of phase equilibria and diffusion, 37 (2), 186–200. doi:10.1007/s11669-015-0441-z
  1322. Hydride precipitation, fracture and plasticity mechanisms in pure zirconium and Zircaloy-4 at temperatures typical for the postulated loss-of-coolant accident
    Pshenichnikov, A.; Stuckert, J.; Walter, M.
    2016. Nuclear engineering and design, 301, 366–377. doi:10.1016/j.nucengdes.2016.03.024
  1323. Land contamination activity data interpretation from Fukushima Daiichi accident
    Jäckel, B. S.; Bevilacqua, A.; Ducros, G.; Gauntt, R.; Stuckert, J.
    2016. Nuclear engineering and design, 300 (2016), 28–33. doi:10.1016/j.nucengdes.2015.12.030
  1324. First results of the bundle test QUENCH-L5 with pre-hydrogenated opt. ZIRLO™ claddings
    Stuckert, J.; Große, M.; Moch, J.; Rössger, C.; Steinbrück, M.; Walter, M.
    2016. 22nd International QUENCH Workshop, 18-22 October 2016, Karlsruhe Institute of Technology, Karlsruhe, Germany
  1325. Update of the QUENCH Program
    Steinbrück, M.; Stuckert, J.; Grosse, M.
    2016. 22nd International QUENCH Workshop, 18-22 October 2016, Karlsruhe Institute of Technology, Karlsruhe, Germany
  1326. High-temperature oxidation of SiC-Ta-SiC sandwich cladding tubes in GFR atmosphere
    Steinbrück, M.
    2016. 22nd International QUENCH Workshop, 18-22 October 2016, Karlsruhe Institute of Technology, Karlsruhe, Germany
  1327. Proceedings of the 22nd International QUENCH Workshop, Karlsruhe, October 18-20, 2016
    Steinbrück, M.
    2016. Karlsruher Institut für Technologie (KIT)
  1328. Special Lectures on Nuclear Materials and Safety - Cladding and Control Rods
    Steinbrück, M.
    2016. HGU Special Seminar, 2.-3. November 2016, Handong Global University, Pohang, Südkorea
  1329. The QUENCH Program at KIT
    Steinbrück, M.; Stuckert, J.; Grosse, M.
    2016. KNF Seminar, KEPCO Nuclear Fuel, 01. November 2016, Daejoen, Korea
  1330. High-temperature oxidation and mutual interactions of materials during severe nuclear accidents
    Steinbrück, M.
    2016. KAIST Seminar, Korea Advanced Institute of Science and Technology, 31 October 2016, Daejeon, Korea
  1331. Oxidation of Zircaloy-4 in steam-nitrogen mixtures at 600-1200°C
    Steinbrueck, M.; Grosse, M.; Oliveira da Silva, F.
    2016. Proceedings of the 2016 International Congress on Advances in Nuclear Power Plants, ICAPP2016, American Nuclear Society, 535–545, American Nuclear Society (ANS)
  1332. Creep Behavior Of Ferritic/Martensitic Steel T91 in Oxygen-Containing Pb and LBE at 450–650°C
    Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016. Proceedings on CD-ROM, ICONE24–61022, The American Society of Mechanical Engineers (ASME)
  1333. High-temperature oxidation tests of SiC under GFR conditions
    Avincola, V.; Kinay, D.; Zhou, X.; Kerr, F.; Steinbrück, M.
    2016. International Youth Nuclear Congress, IYNC2016, 24-30 July 2016, Hangzhou, China
  1334. CoreSOAR Update of the Core Degradation State-of-the Art Report: Status September 2016
    Haste, T.; Barrachin, M.; Repetto Georges; Steinbrück, M.; Bottomley, D.
    2016. 25th International Conference Nuclear Energy for New Europe (NENE2016), Portoroz, SLO, September 5-8, 2016
  1335. Oxidation and hydrogen uptake during high-temperature reaction of zirconium alloys in steam-nitrogen mixtures
    Steinbrück, M.; Grosse, M.
    2016. 18th International Symposium on Zirconium in Nuclear Industry, 15-19 May 2016, Hilton Head Island, SC, USA
  1336. Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering
    Hilger, I.; Boulnat, X.; Hoffmann, J.; Testani, C.; Bergner, F.; De Carlan, Y.; Ferraro, F.; Ulbricht, A.
    2016. Journal of nuclear materials, 472, 206–214. doi:10.1016/j.jnucmat.2015.09.036
  1337. Multiscale modelling of hydrogen behaviour on beryllium (0001) surface
    Stihl, C.; Vladimirov, P. V.
    2016. Nuclear materials and energy, 9, 547–553. doi:10.1016/j.nme.2016.08.003
  1338. Compatibility of fast reactor structural materials with liquid metal coolants (Part 2)
    Konys, J.
    2016. Frédéric Joliot and Otto Hahn Summer School on Nuclear Reactors, Aix-en-Provence, F, August 24 - September 2, 2016
  1339. Compatibility of fast reactor structural materials with liquid metal coolants (Part 1)
    Konys, J.
    2016. Frédéric Joliot and Otto Hahn Summer School on Nuclear Reactors, Aix-en-Provence, F, August 24 - September 2, 2016
  1340. Corrosion behavior of aluminum-based coatings in a liquid metal environment for fusion applications
    Konys, J.; Krauss, W.; Wulf, S.-E.
    2016. International Symposium on Coatings and Corrosion (ISCC 2016), Kuala Lumpur, MAL, May 16-19, 2016
  1341. Compatibility of structural steels with heavy liquid metals (HLMs) for nuclear and fusion applications
    Konys, J.
    2016. Seminar on Cross-Cutting Issues of Heavy Liquid Metals, Bhabha Atomic Research Center (BARC), Mumbai, IND, February 1, 2016
  1342. Corrosion behaviorof austenitic steels1.4970 (15-15 Cr Ni), 316L and1.4571 (316-Ti) in flowing low-oxygen LBE with10⁻⁷ mass% of oxygenat 400 to 550°C
    Konys, J.; Tsisar Valentyn; Schroer, C.
    2016. 17th Asian Pacific Corrosion Control Conference (APCCC 17), Mumbai, IND, January 27-30, 2016
  1343. Gyrotron-Forschung und -Entwicklung am KIT
    Jelonnek, J.; Gantenbein, G.; Avramidis, K.; Franck, J.; Illy, S.; Ioannidis, Z.; Jin, J.; Kalaria, P.; Pagonakis, I.; Ruess, S.; Rzesnicki, T.; Scherer, T.; Schmid, M.; Strauss, D.; Wu, C.; Thumm, M.
    2016. Vakuum in Forschung und Praxis, 28 (6), 21–27. doi:10.1002/vipr.201600631
  1344. Microstructure and intrinsic stress evolution during epitaxial film growth of an Ag0.93Al0.07 solid solution on Si(111); excessive planar faulting due to quantum confinement
    Flötotto, D.; Wang, Z. M.; Markel, I. J.; Kurz, S. J. B.; Mittemeijer, E. J.
    2016. Journal of applied physics, 120, 155305. doi:10.1063/1.4964945
  1345. Heat propagation in computer designed and real metal foam structures
    August, A.; Matz, A. M.; Nestler, B.; Jost, N.
    2016. Multidiscipline modeling in materials and structures, 12 (4). doi:10.1108/MMMS-03-2016-0012
  1346. Effect of neutron irradiation on the microstructure of tungsten
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Schneider, H. C.; Armstrong, D. E. J.; Gibson, J.; Roberts, S. G.
    2016. Nuclear Materials and Energy, 9, 480–483. doi:10.1016/j.nme.2016.09.010
  1347. Progress in the engineering design and assessment of the European DEMO first wall and divertor plasma facing components
    Barrett, T. R.; Ellwood, G.; Pérez, G.; Kovari, M.; Fursdon, M.; Domptail, F.; Kirk, S.; McIntosh, S. C.; Roberts, S.; Zheng, S.; Boccaccini, L. V.; You, J.-H.; Bachmann, C.; Reiser, J.; Rieth, M.; Visca, E.; Mazzone, G.; Arbeiter, F.; Domalapally, P. K.
    2016. Fusion engineering and design, 109-111 (Part A), 917–924. doi:10.1016/j.fusengdes.2016.01.052
  1348. Enthalpy of formation and heat capacity of Li2MnO3
    Cupid, D. M.; Li, D.; Gebert, C.; Reif, A.; Flandorfer, H.; Seifert, H. J.
    2016. Journal of the Ceramic Society of Japan, 124 (10), 1072–1082. doi:10.2109/jcersj2.16116
  1349. High temperature oxidation behavior of Kanthal APM and D alloys in steam
    Tang, C.; Steinbrück, M.; Grosse, M.; Jianu, A.; Weisenburger, A.; Seifert, H. J.
    2016. International Congress on Advances in Nuclear Power Plants (ICAPP 2016), San Francisco, CA, April 17-20, 2016
  1350. Evaluation of EM loads distribution on DEMO blanket segments and their effect on mechanical integrity
    Maione, I. A.; Zeile, C.; Boccaccini, L. V.; Vaccaro, A.
    2016. Fusion engineering and design, 109-111, Part A, 618–623. doi:10.1016/j.fusengdes.2016.02.035
  1351. Mechanical behavior of Be-Ti pebbles at blanket relevant temperatures
    Kurinskiy, P.; Rolli, R.; Kim, J.-H.; Nakamichi, M.
    2016. Fusion engineering and design, 109, Part A, 764–767. doi:10.1016/j.fusengdes.2016.02.003
  1352. Advanced Electrochemical Machining (ECM) for tungsten surface micro-structuring in blanket applications
    Holstein, N.; Krauss, W.; Konys, J.; Heuer, S.; Weber, T.
    2016. Fusion engineering and design, 109-111, Part A, 956–960. doi:10.1016/j.fusengdes.2016.01.045
  1353. Mechanical analyses of the waveguide flange coupling for the first confinement system of the ITER electron cyclotron upper launcher
    Sanchez, A. M.; Bertizzolo, R.; Chavan, R.; Gagliardi, M.; Goodman, T.; Landis, J.-D.; Saibene, G.; Silva, P. S.; Vaccaro, A.
    2016. Fusion engineering and design, 109, Part A, 532–538. doi:10.1016/j.fusengdes.2016.02.061
  1354. Development of an alkali metal thermal to electric converter (AMTEC) for CSP
    Diez de los Rios Ramos, N.; Onea, A.; Hering, W.; Stieglitz, R.; Weisenburger, A.; Stüber, M.; Ulrich, S.
    2016. Energiewendetag, KIT, Karlsruhe, 16.September 2016
  1355. Thermomechanical characterization of joints for blanket and divertor application processed by electrochemical plating
    Krauss, W.; Lorenz, J.; Konys, J.; Basuki, W.; Aktaa, J.
    2016. Fusion engineering and design, 109, Part B, 1280–1285. doi:10.1016/j.fusengdes.2015.12.043
  1356. Automation of the test procedure for accelerated aging of implant packages
    Koker, L.; Nagel, J. A.; Schulz, B.; Ritter, F.; Vollmannshauser, S.; Besser, H.; Gengenbach, U.
    2016. Automatisierungstechnik, 64 (10), 827–838. doi:10.1515/auto-2016-0056
  1357. Numerical analysis of high-speed Lithium jet flow under vacuum conditions
    Gordeev, S.; Groeschel, F.; Stieglitz, R.
    2016. Fusion engineering and design, 109, Part B, 1669–1673. doi:10.1016/j.fusengdes.2015.10.033
  1358. Simulation of hydrogen effect on equilibrium shape of gas bubbles in beryllium
    Bachurin, D. V.; Vladimirov, P. V.
    2016. Fusion engineering and design, 109, Part B, 1432–1436. doi:10.1016/j.fusengdes.2015.12.004
  1359. Cooling design and analysis of the ITER EC Upper launcher
    Spaeh, P.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.; Weinhorst, B.; Krause, A.; Nousiainen, R.
    2016. 26th Symposium on Fusion Engineering (SOFE 2015), Austin, Tex., May 31 - June 4, 2015, Art. Nr.: 7482407, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOFE.2015.7482407
  1360. Irradiation effects in tungsten-copper laminate composite
    Garrison, L. M.; Katoh, Y.; Snead, L. L.; Byun, T. S.; Reiser, J.; Rieth, M.
    2016. Journal of nuclear materials, 481, 134–146. doi:10.1016/j.jnucmat.2016.09.020
  1361. High-Temperature oxidation behavior of kanthal APM and d alloys in steam
    Tang, C.; Steinbrueck, M.; Grosse, M.; Jianu, A.; Weisenburger, A.; Seifert, H. J.
    2016. International Congress on Advances in Nuclear Power Plants, ICAPP 2016; San Francisco; United States; 17 April 2016 through 20 April 2016. Vol. 3, 2112–2119, American Nuclear Society (ANS)
  1362. Ductility in ultrafine-grained (UFG) tungsten foil: Correlation between microstructure and mechanical properties
    Bonk, S.; Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Rieth, M.
    2016. Materials Science and Engineering (MSE) 2016, Darmstadt, September 27-29, 2016
  1363. ATEFA facility for performance evaluation of an alkali metal thermo-electric converter (AMTEC)
    Diez de los Rios Ramos, N.; Onea, A.; Hering, W.; Weisenburger, A.; Stüber, M.; Ulrich, S.; Stieglitz, R.
    2016. 10th PAMIR International Conference Fundamental and Applied MHD (2016), Cagliari, Italy, June 20–24, 2016
  1364. Phase changes in liquid metals for direct energy conversion. Alkali metal thermo-electric converter (AMTEC)
    Diez de los Rios Ramos, N.; Onea, A.; Hering, W.; Weisenburger, A.; Stüber, M.; Ulrich, S.; Stieglitz, R.
    2016. LIMTECH PhD Summer School, Ilmenau, July 12-13, 2016
  1365. Experimental Investigation and CALPHAD Assessment of the Eutectic Trough in the System NiAl-Cr-Mo
    Peng, J.; Franke, P.; Seifert, H. J.
    2016. Journal of phase equilibria and diffusion, 37 (5), 592–600. doi:10.1007/s11669-016-0490-y
  1366. The process of growing Cr₂O₃ thin films on α-Al₂O₃ substrates at low temperature by r.f. magnetron sputtering
    Gao, Y.; Leiste, H.; Stueber, M.; Ulrich, S.
    2016. Journal of Crystal Growth, 457, 158–163. doi:10.1016/j.jcrysgro.2016.08.009
  1367. Extension of the multi-frequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Kircher, M.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Zohm, H.; Gantenbein, G.; Jelonnek, J.; Thumm, M.; Meier, A.; Scherer, T.; Strauss, D.; Kasparek, W.; Lechte, C.; Plaum, B.; Zach, A.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2016. (ASDEX Upgrage Team, Ed.), 41st International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2016), Copenhagen, Denmark, September 25–30, 2016
  1368. Heating & current drive efficiencies, TBR and RAMI considerations for DEMO
    Franke, T.; Agostinetti, P.; Avramidis, K.; Bader, A.; Bachmann, C.; Biel, W.; Bolzonella, T.; Ciattaglia, S.; Coleman, M.; Cismondo, F.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Jenkins, I.; Kalsey, M.; Kembleton, R.; Mantel Nicolas; Noterdaeme, J.-M.; Rispoli, N.; Simonin, A.; Sonato, P.; Tran, M. Q.; Vincenzi, P.; Wenninger, R.
    2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prague, Czechia, September 5–9, 2016
  1369. Ductilisation of tungsten (W)
    Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Bonk, S.; Bonnekoh, C.; Hoffmann, A.; Wurster, S.; Rieth, M.
    2016. Materials Science and Engineering (MSE) 2016, Darmstadt, September 27-29, 2016
  1370. Laser printing and femtosecond laser structuring of electrode materials for the manufacturing of 3D lithium-ion micro-batteries
    Smyrek, P.; Kim, H.; Zheng, Y.; Seifert, H. J.; Piqué, A.; Pfleging, W.
    2016. Laser 3D Manufacturing (Conference) III : San Francisco, California, United States, 15 - 18 February 2016. Ed.: B. Gu, 973806, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2211546
  1371. Aufbau und Eigenschaften von PVD-Hartstoffschichten in den Systemen Cr-Zr-O und Cr-Zr-O-N. PhD dissertation
    Spitz, S. C.
    2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000059633
  1372. Influence of substrate surface roughness on microstructural and electrical properties of Lithium-rich Li-Ni-Mn-Co-O thin film cathodes
    Strafela, M.; Leiste, H.; Seemann, K.; Seifert, H. J.; Ulrich, S.
    2016. Vacuum, 131, 240–245. doi:10.1016/j.vacuum.2016.06.017
  1373. Identification of laves- and Z-phase formed in 9%Cr ferritic alloy after long-term thermal treatment
    Klimenkov, M.; Jäntsch, U.; Hoffmann, J.; Rieth, M.
    2016. 16th European Microscopy Congress (EMC 2016), Lyon, F, August 28 - September 2, 2016. Abstracts publ.online, MS-06–827. doi:10.1002/9783527808465.EMC2016.6367
  1374. Identification of laves- and Z-phase formed in 9%Cr ferritic alloy after long-term thermal treatment
    Klimenkov, M.; Jäntsch, U.; Hoffmann, J.; Rieth, M.
    2016. 16th European Microscopy Congress (EMC 2016), Lyon, F, August 28 - September 2, 2016
  1375. TEM characterization of irradiated beryllium
    Klimenkov, M.; Hoffmann, J.; Kurinsky, P.; Kuksenko, V.; Vladimirov, P.; Chakin, V.; Möslang, A.
    2016. 16th European Microscopy Congress (EMC 2016), Lyon, F, August 28 - September 2, 2016. Abstracts publ.online, MS-05–820. doi:10.1002/9783527808465.EMC2016.6366
  1376. TEM characterization of irradiated beryllium
    Klimenkov, M.; Hoffmann, J.; Kurinsky, P.; Kuksenko, V.; Vladimirov, P.; Chakin, V.; Möslang, A.
    2016. 16th European Microscopy Congress (EMC 2016), Lyon, F, August 28 - September 2, 2016
  1377. Orientation relationships of delta hydrides in zirconium and zircaloy-4
    Pshenichnikov, A.; Stuckert, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, N.C., June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60061, The American Society of Mechanical Engineers (ASME)
  1378. Orientation relationships of δ-hydrides in zirconium and zircaloy-4
    Pshenichnikov, A.; Stuckert, J.
    2016. 26th International Conference on Nuclear Engineering (ICONE 2018), London, United Kingdom, July 22–28, 2018
  1379. High-temperature low-cycle fatigue behavior of novel austenitic ODS steels
    Straßberger, L.; Chauhan, A.; Gräning, T.; Czink, S.; Aktaa, J.
    2016. International journal of fatigue, 93, 194–200. doi:10.1016/j.ijfatigue.2016.08.018
  1380. Which Resolution can be achieved in Praxis in Neutron Imaging Experiments? - A General View
    Grosse, M.; Kardjilov, N.
    2016. 8th International Technical Meeting on Neutron Radiography, Beijing, China, September 5-8,2016
  1381. Microwave processing of solid-state electrolyte for Li-ion batteries N/A
    Mahmoud, M. M.; Cui, Y.; Ziebert, C.; Rohde, M.; Link, G.; Seifert, H. J.
    2016. 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016
  1382. The ITER EC H&CD upper launcher: Methodology in the FEM analyses of the diamond window unit subject to seismic and baking loads
    Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Gagliardi, M.; Saibene, G.; Goodman, T. P.; Krause, A.; Sanchez, F.
    2016. 26th IEEE Symposium on Fusion Engineering, SOFE 2015, Austin, United States, 31 May 2015 through 4 June 2015, Art.Nr.: 7482411, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOFE.2015.7482411
  1383. Microwaves crystallization of Lithium Aluminum Germanium Phosphate glass-ceramics using 30 GHz processing
    Mahmoud, M.; Yuantao, C.; Ahmad, S.; Rohde, M.; Ziebert, C.; Link, G.; Seifert, H.
    2016. Materials Science and Technolgy 2016, Salt Lake City, UT, October 23-27, 2016
  1384. Recent status and improvement of reduced-activation ferritic-martensitic steels for high-temperature service
    Tan, L.; Katoh, Y.; Tavassoli, A.-A. F.; Henry, J.; Rieth, M.; Sakasegawa, H.; Tanigawa, H.; Huang, Q.
    2016. Journal of nuclear materials, 479, 515–523. doi:10.1016/j.jnucmat.2016.07.054
  1385. Crystallisation studies of RE2O3[Formula presented]Al2O3[Formula presented]SiO2 glasses under long heat-treatment conditions
    Ahmad, S.; Herrmann, M.; Mahmoud, M. M.; Leiste, H.; Lippmann, W.; Seifert, H. J.
    2016. Journal of alloys and compounds, 688, 762–774. doi:10.1016/j.jallcom.2016.07.267
  1386. Thermal properties and ionic conductivity of Li1,3Ti1,7Al0,3(PO4)3 solid electrolytes sintered by field-assisted sintering
    Bucharsky, E. C.; Schell, K. G.; Hupfer, T.; Hoffmann, M. J.; Rohde, M.; Seifert, H. J.
    2016. Ionics, 22 (7), 1043–1049. doi:10.1007/s11581-015-1628-3
  1387. Towards Reliable Organs-on-Chips and Humans-on-Chips
    Diaz Lantada, A.; Begasse, G.; Morss Clyne, A.; Hengsbach, S.; Piotter, V.; Smyrek, P.; Plewa, K.; Guttmann, M.; Pfleging, W. I.
    2016. Microsystems for Enhanced Control of Cell Behavior : Fundamentals, Design and Manufacturing Strategies, Applications and Challenges. Ed.: A. Diaz Lantada, 389–408, Springer. doi:10.1007/978-3-319-29328-8_22
  1388. Accident fuel-cladding concepts for light water reactors
    Grosse, M.
    2016. International Youth Nuclear Congress, Hangzhou, China, July 28, 2016
  1389. Accident fuel-cladding concepts for light water reactors
    Grosse, M.
    2016. Workshop on SFP and Fuel Cladding Safety, Pohang, Korea, July 22, 2016
  1390. Experimental investigations and modelling of the reaction of zirconium alloys in nitrogen/oxygen or nitrogen/steam atmospheres
    Grosse, M.; Steinbrueck, M.; Maeng, J.; Sung, J.
    2016. Workshop on SFP and Fuel Cladding Safety, Pohang, Korea, July 22, 2016
  1391. Neutron imaging investigation of hydrogen absorption and diffusion at HT
    Grosse, M.
    2016. Workshop on SFP and Fuel Cladding Safety, Pohang, Korea, July 22, 2016
  1392. The QUENCH program at KIT
    Grosse, M.
    2016. Workshop on SFP and Fuel Cladding Safety, Pohang, Korea, July 22, 2016
  1393. In-situ Investigations of the Hydrogen Uptake of Zirconium Alloys during Steam Oxidation
    Grosse, M.; Steinbrueck, M.; Schillinger, B.; Kaestner, A.
    2016. 18th International Symposium on Zirconium in the Nuclear Industry, Hilton Head Island, SC, May 15-19, 2016
  1394. Influence of the steam and oxygen flow rate on the reaction of zirconium in steam/nitrogen and oxygen/nitrogen atmospheres
    Grosse, M.; Steinbrück, M.; Maeng, Y.; Sung, J.
    2016. International Congress on Advances in Nuclear Power Plants (ICAPP 2016), San Francisco, CA, April 17-20, 2016. Proceedings on CD-ROM, Paper 16259, American Nuclear Society (ANS)
  1395. Investigation of the diffusion behavior in Sn-xAg-yCu/Cu solid state diffusion couples
    Yuan, Y.; Li, D.; Guan, Y.; Seifert, H. J.; Moelans, N.
    2016. Journal of alloys and compounds, 686, 794–802. doi:10.1016/j.jallcom.2016.06.228
  1396. A thermodynamic study of the cadmium–neodymium system
    Skołyszewska-Kühberger, B.; Reichmann, T. L.; Ipser, H.
    2016. Monatshefte für Chemie, 147 (6), 1001–1008. doi:10.1007/s00706-016-1670-5
  1397. Tin Tungstate Nanoparticles: A Photosensitizer for Photodynamic Tumor Therapy
    Seidl, C.; Ungelenk, J.; Zittel, E.; Bergfeldt, T.; Sleeman, J. P.; Schepers, U.; Feldmann, C.
    2016. ACS nano, 10 (3), 3149–3157. doi:10.1021/acsnano.5b03060
  1398. KIT multi-physics tools for the analysis of design and beyond design basis accidents of light water reactors
    Sanchez, V.; Miassoedov, A.; Steinbrueck, M.; Tromm, W.
    2016. Kerntechnik, 81 (2), 145–148. doi:10.3139/124.110687
  1399. Direct laser interference patterning and ultrafast laser-induced micro/nano structuring of current collectors for lithium-ion batteries
    Zheng, Y.; An, Z.; Smyrek, P.; Seifert, H. J.; Kunze, T.; Lang, V.; Lasagni, A. F.; Pfleging, W.
    2016. Laser-Based Micro-and Nanoprocessing X; San Francisco; United States; 16 - 18 February 2016 Ed. U. Klotzbach, 97361B, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2220111
  1400. Post-mortem characterization of fs laser-generated micro-pillars in Li(Ni1/3Mn1/3Co1/3)O2 electrodes by laser-induced breakdown spectroscopy
    Smyrek, P.; Zheng, Y.; Seifert, H. J.; Pfleging, W.
    2016. Laser-based Micro- and Nanoprocessing X., San Francisco, California, United States, 13 - 18 February 2016. Ed.: U. Klotzbach, 97361C/1–6, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2210815
  1401. Corrosion resistance of Al-based coatings in flowing Pb-15.7Li produced by aluminum electrodeposition from ionic liquids
    Wulf, S. E.; Krauss, W.; Konys, J.
    2016. Nuclear materials and energy, 9, 519–523. doi:10.1016/j.nme.2016.03.008
  1402. Comparative small angle neutron scattering (SANS) study of Eurofer97 steel neutron irradiated in mixed (HFR) and fast spectra (BOR60) reactors
    Coppola, R.; Gaganidze, E.; Klimenkov, M.; Dethloff, C.; Lindau, R.; Valli, M.; Aktaa, J.; Möslang, A.
    2016. Nuclear Materials and Energy, 9, 189–193. doi:10.1016/j.nme.2016.02.008
  1403. Variations in structure and electrochemistry of iron- and titanium-doped lithium nickel manganese oxyfluoride spinels
    Hoeweling, A.; Stenzel, D.; Gesswein, H.; Kaus, M.; Indris, S.; Bergfeldt, T.; Binder, J. R.
    2016. Journal of power sources, 315, 269–276. doi:10.1016/j.jpowsour.2016.03.023
  1404. Cold rolled tungsten (W) plates and foils: Evolution of the microstructure
    Bonk, S.; Reiser, J.; Hoffmann, J.; Hoffmann, A.
    2016. International journal of refractory metals & hard materials, 60, 92–98. doi:10.1016/j.ijrmhm.2016.06.020
  1405. Analysis of the interaction between liquid tin and austenitic steels, nickel-based alloys as well as protective surface layers at high temperature
    Emmerich, T.; Schroer, C.
    2016. Junior EUROMAT 2016, Lausanne, CH, July 10-14, 2016
  1406. Corrosion of 9%Cr ferritic / martensitic steels at 450 and 550⁰C in flowing Pb-Bi eutectic with 10⁻⁷ mass% dissolved oxygen
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, N.C., June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60826, The American Society of Mechanical Engineers (ASME)
  1407. Corrosion of 9%Cr ferritic / martensitic steels at 450 and 550⁰C in flowing Pb-Bi eutectic with 10⁻⁷ mass% dissolved oxygen
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, N.C., June 26-30, 2016
  1408. Safest roadmap for corium experimental research in Europe
    Journeau, C.; Bouyer, V.; Cassiaut-Louis, N.; Fouquart, P.; Piluso, P.; Ducros, G.; Gosse, S.; Gueneau, C.; Quaini, A.; Fluhrer, B.; Miassoedov, A.; Stuckert, J.; Steinbrück, M.; Bechta, S.; Kudinov, P.; Hozer, Z.; Guba, A.; Manara, D.; Bottomley, D.; Langrock, G.; Schmidt, H.; Kiselova, M.; Zdarek, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60916, The American Society of Mechanical Engineers (ASME)
  1409. Technological developments in ATEFA for AMTEC research
    Diez de los Rios Ramos, N.; Weisenburger, A.; Onea, A.; Hering, W.; Stüber, M.; Ulrich, S.; Stieglitz, R.
    2016. Proccedings of the 10th PAMIR International Conference Fundamental and Applied MHD, Cagliari, I, June 20-24, 2016, 653–658, University of Cagliari
  1410. Creep Behavior Of Ferritic/Martensitic Steel T91 in Oxygen-Containing Pb and LBE at 450–650°C
    Yurechko-Hussy, M.; Schroer, C.; Skrypnik, A.; Wedemeyer, O.; Konys, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016
  1411. Preparation of titanium by electrochemical reduction of titanium dioxide powder in molten SrCl2-KCl
    Tang, C.; Yu, X.; Chen, J.; Han, Q.; Liu, K.
    2016. Journal of alloys and compounds, 684, 699–706. doi:10.1016/j.jallcom.2016.05.206
  1412. Corrosion in steel T91 caused by flowing lead-bismuth eutectic at 400°C and 10⁻⁷ mass% solved oxygen
    Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016. Proceedings on CD-ROM, ICONE24–60845, The American Society of Mechanical Engineers (ASME)
  1413. Corrosion in steel T91 caused by flowing lead-bismuth eutectic at 400°C and 10⁻⁷ mass% solved oxygen
    Schroer, C.; Tsisar, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. 24th International Conference on Nuclear Engineering (ICONE24), Charlotte, NC, USA, June 26-30, 2016
  1414. Effects of strain-induced martensite and its reversion on the magnetic properties of AISI 201 austenitic stainless steel
    Filho, I. R. S.; Sandim, M. J. R.; Cohen, R.; Nagamine, L. C. C. M.; Hoffmann, J.; Bolmaro, R. E.; Sandim, H. R. Z.
    2016. Journal of magnetism and magnetic materials, 419, 156–165. doi:10.1016/j.jmmm.2016.06.027
  1415. Which resolution can be achieved in praxis in neutron imaging expriments? - A general view
    Grosse, M.; Kardjilov, N.
    2016. International Technical Meeting on Neutron Radiography, September, 4 2016
  1416. Microwave Crystallization of Lithium Aluminum Germanium Phosphate Solid-State Electrolyte
    Mahmoud, M. M.; Cui, Y.; Rohde, M.; Ziebert, C.; Link, G.; Seifert, H. J.
    2016. Materials, 9 (7), 506. doi:10.3390/ma9070506
  1417. Assessment of high-temperature steam oxidation behavior of Zircaloy-4 with Ti₂AlC coating deposited by magnetron sputtering
    Tang, C.; Stüber, M.; Steinbrück, M.; Grosse, M.; Ulrich, S.; Seifert, H. J.
    2016. NuMat2016: The Nuclear Materials Conference, Montpellier, F, November 7-10, 2016
  1418. Ductilisation of tungsten (W) through cold rolling: Correlation of microstructure and mechanical properties of UFG-W sheets
    Reiser, J.; Hoffmann, J.; Rieth, M.; Bonk, S.
    2016. Materials Science and Engineering (MSE) 2016, Darmstadt, September 27-29, 2016
  1419. Ductilisation of tungsten through cold rolling: Change of brittle to ductile transition temperature (BDTT) in high deformed tungsten
    Bonnekoh, C.; Reiser, J.; Hoffmann, J.; Bonk, S.
    2016. Materials Science and Engineering (MSE) 2016, Darmstadt, September 27-29, 2016
  1420. Influence of annealing and the production route on austenitic ods steels
    Gräning, T.; Hoffmann, J.; Antusch, S.; Klimenkov, M.; Rieth, M.; Möslang, A.; Müller, S.
    2016. 3rd Oxide Dispersion Strengthened Steels Group of Young Scientists Meeting, Dresden, April 19-20, 2016
  1421. Thermodynamic assessment of the Cu-Li system and prediction of enthalpy of mixing of Cu-Li-Sn liquid alloys
    Li, D.; Fürtauer, S.; Flandorfer, H.; Cupid, D. M.
    2016. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 53 (June), 105–115. doi:10.1016/j.calphad.2016.04.003
  1422. Localized epitaxial grwth and characterization of Cr₂O₃ thin films on α-Al₂O₃ substrates with different thickness by r.f. magnetron sputtering at 320⁰C
    Gao, Y.; Leiste, H.; Stueber, M.; Ulrich, S.
    2016. Materials Science and Engineering (MSE) 2016, Darmstadt, September 27-29, 2016
  1423. Development of EAM Fe-Y interaction potential towards simulation of ODS particles in iron
    Vladimirov, P.; Möslang, A.; Koch, S.
    2016. 13th Conference on Computer Simulation of Radiation Effects in Solids (COSIRES), Loughborough, GB, June 19-24, 2016
  1424. Shape of hydrogen-covered bubbles in beryllium: ab initio study
    Bachurin, D.; Vladimirov, P.
    2016. 2nd International Workshop on Models and Data for Plasma-Material Interaction in Fusion Devices (MoD-PMI 2016), Loughborough, GB, June 22-24, 2016
  1425. Development of EAM Fe-Y interaction potential
    Vladimirov, P.; Möslang, A.; Koch, S.
    2016. 8th Multiscale Materials Modeling (MMM) International Conference, Dijon, F, October 9-14, 2016
  1426. Thermophysical properties of LiCoO2-LiMn2O4 blended electrode materials for Li-ion batteries
    Gotcu, P.; Seifert, H. J.
    2016. Physical chemistry, chemical physics, 18 (15), 10550–10562. doi:10.1039/c6cp00887a
  1427. Dielectric materials for high frequency detector applications
    Scherer, T.
    2016. 80. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 6.-11.März 2016.Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.51(2016), DF 6.8
  1428. Double-disc Diamond Windows for Fusion Applications
    Vaccaro, A.; Aiello, G.; Grossetti, G.; Mazzocchi, F.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2016. 80. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 6.-11.März 2016.Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.51(2016), DF 6.4
  1429. Requirements for materials in high power mm-wave systems for Nuclear Fusion applications
    Grossetti, G.; Aiello, G.; Mazzocchi, F.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2016. 80. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 6.-11.März 2016.Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.51(2016), DF 6.3
  1430. Torus Diamond Window for the ITER ECRH Upper launcher
    Schreck, S.; Aiello, G.; Grossetti, G.; Mazzocchi, F.; Meier, A.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Scherer, T.
    2016. 80. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 6.-11.März 2016.Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.51(2016), DF 6.2
  1431. Investigation of a broadband double-disc diamond window unit
    Vaccaro, A.; Stober, J.; Wagner, D.; Scherer, T.
    2016. 41st International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2016), Copenhagen, Denmark, September 25–30, 2016
  1432. Elastic moduli of nanocrystalline binary Al alloys with Fe, Co, Ti, Mg and Pb alloying elements
    Babicheva, R. I.; Bachurin, D. V.; Dmitriev, S. V.; Zhang, Y.; Kok, S.; Bai, L.; Zhou, K.
    2016. The philosophical magazine, 96 (15), 1598–1612. doi:10.1080/14786435.2016.1171416
  1433. Application of Nd₂O₃-Al₂O₃-SiO₂ glass solder for joining of silicon carbide components
    Ahmad, S.; Herrmann, M.; Mahmoud, M. M.; Lippmann, W.; Hurtado, A. M.; Seifert, H. J.
    2016. Journal of the European Ceramic Society, 36 (7), 1559–1569. doi:10.1016/j.jeurceramsoc.2016.01.020
  1434. Neutron irradiated 9Cr-steel: Effect of nanoscaled ODS particles and helium on properties
    Möslang, A.; Klimenkov, M.; Lindau, R.; Materna-Morris, E.; Rolli, R.; Schneider, H. C.
    2016. 7th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-7), Kalpakkam, IND, January 19-22, 2016
  1435. Materials research for fusion
    Knaster, J.; Moeslang, A.; Muroga, T.
    2016. Nature Physics, 12 (5), 424–434. doi:10.1038/nphys3735
  1436. Investigation of microstructure changes in ODS-EUROFER after hydrogen loading
    Emelyanova, O. V.; Ganchenkova, M. G.; Malitskii, E.; Yagodzinskyy, Y. N.; Klimenkov, M.; Borodin, V. A.; Vladimirov, P. V.; Lindau, R.; Möslang, A.; Hänninen, H.
    2016. Journal of nuclear materials, 468, 355–359. doi:10.1016/j.jnucmat.2015.07.053
  1437. Tritium release from advanced beryllium materials after loading by tritium/hydrogen gas mixture
    Chakin, V.; Rolli, R.; Moeslang, A.; Kurinskiy, P.; Vladimirov, P.; Dorn, C.; Kupriyanov, I.
    2016. Fusion engineering and design, 107 (Jun), 75–81. doi:10.1016/j.fusengdes.2016.04.018
  1438. On the in-plane uniaxial anisotropy formation by using Fe-Co-Zr-N films: A theoretical and experimental investigation
    Seemann, K.; Beirle, S.; Leiste, H.
    2016. Journal of magnetism and magnetic materials, 413, 115–120. doi:10.1016/j.jmmm.2016.04.031
  1439. Combining Sensor and Protective Functionalities in Ferromagnetic Nanocomposite Thin Films for Applications in Harsh Environments
    Seemann, K.; Leiste, H.; Stüber, M.; Krüger, K.; Brunken, H.; Ludwig, A.; Thede, C.; Quandt, E.
    2016. Advanced engineering materials, 18 (5), 739–745. doi:10.1002/adem.201500474
  1440. Achieving room-temperature ductility for monolithic tungsten (W)
    Reiser, J.; Wurster, S.; Bonk, S.; Bonnekoh, C.; Jäntsch, U.; Hoffmann, J.; Klimenkov, M.; Rieth, M.; Hoffmann, A.
    2016. Ruhr-Universität Bochum, 19.Mai 2016
  1441. Mixed-mode high-power impulse magnetron sputter deposition of tetrahedral amorphous carbon with pulse-length control of ionization
    Tucker, M. D.; Ganesan, R.; McCulloch, D. G.; Partridge, J. G.; Stueber, M.; Ulrich, S.; Bilek, M. M. M.; McKenzie, D. R.; Marks, N. A.
    2016. Journal of Applied Physics, 119 (15), 155303. doi:10.1063/1.4946841
  1442. Safest roadmap for corium experimental research in Europe
    Journeau, C.; Bouyer, V.; Cassiaut-Louis, N.; Fouquart, P.; Piluso, P.; Ducros, G.; Gosse, S.; Gueneau, C.; Quaini, A.; Fluhrer, B.; Miassoedov, A.; Stuckert, J.; Steinbrück, M.; Bechta, S.; Kudinov, P.; Hozer, Z.; Guba, A.; Manara, D.; Bottomley, D.; Langrock, G.; Schmidt, H.; Kiselova, M.; Zdarek, J.
    2016. 26th International Conference on Nuclear Engineering (ICONE 2018), London, United Kingdom, July 22–28, 2018
  1443. Bi₂O₃ nanoparticles encapsulated in surface mounted metal-organic framework thin films
    Guo, W.; Chen, Z.; Yang, C.; Neumann, T.; Kübel, C.; Wenzel, W.; Welle, A.; Pfleging, W.; Shekhah, O.; Wöll, C.; Redel, E.
    2016. Nanoscale, 8 (12), 6468–6472. doi:10.1039/c6nr00532b
  1444. The reprocessing of advanced mixed lithium orthosilicate/metatitanate tritium breeder pebbles
    Leys, O.; Bergfeldt, T.; Kolb, M. H. H.; Knitter, R.; Goraieb, A. A.
    2016. Fusion Engineering and Design, 107, 70–74. doi:10.1016/j.fusengdes.2016.04.025
  1445. Influence of preparation conditions on the microstructure of ODS materials
    Klimenkov, M.
    2016. 3rd International Workshop on ODS Materials, Dresden, April 21-22, 2016
  1446. ITER ECRH Upper Launcher: Test plan for qualification of the Diamond Torus Window Prototype III
    Schreck, S.; Aiello, G.; Meier, A.; Strauss, D.; Gagliardi, M.; Saibene, G.; Scherer, T.
    2016. Fusion engineering and design, 109-111, 1232–1236. doi:10.1016/j.fusengdes.2015.11.056
  1447. Radiation level analysis for the port cell of the ITER electron cyclotron-heating upper launcher
    Weinhorst, B.; Fischer, U.; Lu, L.; Strauss, D.; Spaeh, P.; Scherer, T.; Leichtle, D.
    2016. Fusion engineering and design, 109–111, Part B, 1437–1441. doi:10.1016/j.fusengdes.2015.12.003
  1448. Experimental and numerical investigation of silicon carbide and refractory materials under extreme conditions. PhD dissertation
    Angelici Avincola, V.
    2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000054142
  1449. Application of thermal hydraulic and severe accident cde SOCRAT/V3 to bottom water reflood experiment QUENCH-LOCA-1
    Vasiliev, A.; Stuckert, J.
    2016. Journal of Nuclear Engineering and Radiation Science, 2, 021024/1–7. doi:10.1115/1.4031815
  1450. Cladding oxidation during air ingress. Part I: Experiments on air ingress
    Stuckert, J.; Hozer, Z.; Kiselev, A.; Steinbrück, M.
    2016. Annals of Nuclear Energy, 93, 4–17. doi:10.1016/j.anucene.2015.12.034
  1451. European DEMO divertor target: Operational requirements and material-design interface
    You, J. H.; Visca, E.; Bachmann, C.; Barrett, T.; Crescenzi, F.; Fursdon, M.; Greuner, H.; Guilhem, D.; Languille, P.; Li, M.; McIntosh, S.; Müller, A. V.; Reiser, J.; Richou, M.
    2016. Nuclear materials and energy, 9, 171–176. doi:10.1016/j.nme.2016.02.005
  1452. Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour
    Reiser, J.; Wurster, S.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Bonk, S.; Bonnekoh, C.; Kiener, D.; Pippan, R.; Hoffmann, A.; Rieth, M.
    2016. International Journal of Refractory Metals and Hard Materials, 58, 22–33. doi:10.1016/j.ijrmhm.2016.03.006
  1453. Dielectric properties of single crystalline diamond (SCD) samples
    Mazzocchi, F.; Scherer, T. A.; Meier, A.; Yamada, H.
    2016. Hasselt Diamond Workshop 2016 - SBDD XXI, Hasselt, B, March 9-11, 2016. Book of Abstracts p.172
  1454. Modeling and Simulation the Thermal Runaway Behavior of Cylindrical Li-Ion Cells—Computing of Critical Parameter
    Melcher, A.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2016. Energies, 9 (4), 292/1–19. doi:10.3390/en9040292
  1455. Gas Evolution in LiNi0.5Mn1.5O₄/Graphite Cells Studied In Operando by a Combination of Differential Electrochemical Mass Spectrometry, Neutron Imaging, and Pressure Measurements
    Michalak, B.; Berkes, B. B.; Sommer, H.; Bergfeldt, T.; Brezesinski, T.; Janek, J.
    2016. Analytical chemistry, 88 (5), 2877–2883. doi:10.1021/acs.analchem.5b04696
  1456. Decoupling ferromagnetic properties of Fe-Co-Hf-N films with in-plane uniaxial anisotropy from ferromagnetic WC-Co substrates used as a sensor system for cutting tools
    Beirle, S.; Seemann, K.; Leiste, H.
    2016. European Magnetic Sensors and Actuators Conference (EMSA), Torino, I, July 12-15, 2016
  1457. Ductilisation of tungsten (W)
    Reiser, J.; Garrison, L. M.; Greuner, H.; Wurster, S.; Hohe, J.; Bonk, S.; Bonnekoh, C.; Jäntsch, U.; Hoffmann, J.; Klimenkov, M.; Hoffmann, A.; Rieth, M.
    2016. Materials Science and Engineering (MSE) 2016, Darmstadt, September 27-29, 2016
  1458. Design considerations for future DEMO gyrotrons: A review on related gyrotron activities within EUROfusion
    Jelonnek, J.; Aiello, G.; Alberti, A.; Avramidis, K.; Braunmueller, F.; Bruschi, A.; Chelis, J.; Franck, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Kalaria, P.; Latsas, G. P.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Scherer, T.; Schmid, M.; Strauss, D.; Wu, C.; Tigelis, I.; Thumm, M.; Tran, M. Q.
    2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prague, Czechia, September 5–9, 2016
  1459. Progress in conceptual design of DEMO EC system
    Garavaglia, S.; Bruschi, A.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Moro, A.; Poli, E.; Rispoli, N.; Strauss, D.; Tran, Q. M.; Franke, T.
    2016. 19th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-19), Gandhinagar Gujarat, IND, April 4-7, 2016
  1460. Conceptual design of the DEMO EC-system: main developments and R&D achievements
    Granucci, G.; Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K. A.; Braunmüller, F.; Bruschi, A.; Chelis, J.; Franck, J.; Gantenbein, G.; Garavaglia, S.; Grossetti, G.; Illy, S.; Ioannidis, Z.; Kalaria, P.; Moro, A.; Pagonakis, I. G.; Poli, E.; Rispoli, N.; Rzesnicki, T.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Wu, C.; Franke, T.; Tran, M. Q.
    2016. 26th IAEA Fusion Energy Conference (FEC), Kyoto, J, October 17-22, 2016
  1461. Influence of the steam and oxygen flow rate on the reaction of zirconium in steam/nitrogen and oxygen/nitrogen atmospheres
    Grosse, M.; Steinbrück, M.
    2016. International Congress on Advances in Nuclear Power Plants (ICAPP 2016), San Francisco, CA, April 17-20, 2016
  1462. High temperature oxidation behavior of FeCrAl(RE) alloy in steam
    Tang, C.; Steinbrück, M.; Grosse, M.; Jianu, A.; Weisenburger, A.; Seifert, H. J.
    2016. International Congress on Advances in Nuclear Power Plants (ICAPP 2016), San Francisco, CA, April 17-20, 2016
  1463. Oxidation of zircaloy-4 in steam-nitrogen mixtures at 600-1200⁰C
    Steinbrück, M.; Grosse, M.; Oliveira da Silva, F.
    2016. International Congress on Advances in Nuclear Power Plants (ICAPP 2016), San Francisco, CA, April 17-20, 2016
  1464. Post-mortem characterzation of fs laser-generated micro-pillars in Li(Ni1/3Mn1/3Co1/3)O2 electrodes by laser-induced breakdown spectroscopy
    Smyrek, P.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2016. Photonics West 2016, San Francisco, CA, February 13-18, 2016
  1465. Progress in EUROfusion WP HCD EC gyrotron R&D and advanced developments for DEMO
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K. A.; Braunmüller, F.; Franck, J.; Franke, T.; Gantenbein, G.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Illy, S.; Ionnidis, Z.; Jin, J.; Kalaria, P.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Scherer, T.; Strauss, D.; Thumm, M.; Tigelis, I.; Tran, M. Q.; Wu, C.; Zhang, J.
    2016. 19th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-19), Gandhinagar Gujarat, IND, April 4-7, 2016
  1466. Laser-printing and femtosecond laser-structuring of electrode materials for the manufacturing of 3D lithium-ion micro-batteries
    Pröll, J.; Kim, H.; Zheng, Y.; Smyrek, P.; Seifert, H. J.; Pique, A.; Pfleging, W.
    2016. Photonics West 2016, San Francisco, CA, February 13-18, 2016
  1467. Laser Beam Melting as manufacturing process for the realization of complex nuclear fusion and high heat flux components
    Neuberger, H.; Weth, A. von der; Materna-Morris, E.; Bolich, D.; Dlouhy, I.; Stratil, L.; Klötzer, B.
    2016. 22nd Topical Meeting on the Technology of Fusion Energy (TOFE 2016), Philadelphia, PA, August 22-25, 2016
  1468. Height control for small periodic structures using x-ray radiography
    Schüttler, M.; Meyer, P.; Schaff, F.; Yaroshenko, A.; Kunka, D.; Besser, H.; Pfeiffer, F.; Mohr, J.
    2016. Measurement science and technology, 27 (2), 025015. doi:10.1088/0957-0233/27/2/025015
  1469. Numerical exploration into the potential of tungsten reinforced CuCrZr matrix composites
    Hohe, J.; Fliegener, S.; Findeisen, C.; Reiser, J.; Widak, V.; Rieth, M.
    2016. Journal of Nuclear Materials, 470, 13–29. doi:10.1016/j.jnucmat.2015.11.056
  1470. Long-term corrosion of austenitic steels in flowing LBE at 400 ⁰C and 10-7 mass% dissolved oxygen in comparison with 450 and 550 ⁰C
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. Journal of Nuclear Materials, 468, 305–312. doi:10.1016/j.jnucmat.2015.09.027
  1471. Silicon-containing ferritic/martensitic steel after exposure to oxygen-containing flowing lead-bismuth eutectic at 450 and 550 ⁰C
    Schroer, C.; Koch, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2016. Journal of Nuclear Materials, 469, 162–176. doi:10.1016/j.jnucmat.2015.11.058
  1472. Drift of dislocation tripoles under ultrasound influence
    Murzaev, R. T.; Bachurin, D. V.; Nazarov, A. A.
    2016. Ultrasonics, 64, 77–82. doi:10.1016/j.ultras.2015.08.001
  1473. Influence of laser pulse duration on the electrochemical performance of laser structured LiFePO₄ composite electrodes
    Mangang, M.; Seifert, H. J.; Pfleging, W.
    2016. Journal of power sources, 304, 24–32. doi:10.1016/j.jpowsour.2015.10.086
  1474. Laser-induced breakdown spectroscopy of laser-structured Li(NiMnCo)O₂ electrodes for lithium-ion batteries
    Smyrek, P.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2016. Journal of the Electrochemical Society, 163 (2), A19-A26. doi:10.1149/2.0981514jes
  1475. Ductilisation of tungsten (W): On the shift of the brittle-to-ductile transition (BDT) to lower temperatures through cold rolling
    Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Bonk, S.; Bonnekoh, C.; Rieth, M.; Hoffmann, A.; Mrotzek, T.
    2016. International Journal of Refractory Metals and Hard Materials, 54, 351–369. doi:10.1016/j.ijrmhm.2015.09.001
  1476. High-Temperature Oxidation of Zircaloy-4 in Oxygen–Nitrogen Mixtures
    Steinbrück, M.; Schaffer, S.
    2016. Oxidation of Metals, 85 (3), 245–262. doi:10.1007/s11085-015-9572-1
  1477. Tantalum oxidation in steam atmosphere
    Avincola, V. A.; Janek, M.; Stegmaier, U.; Steinbrück, M.; Seifert, H. J.
    2016. Oxidation of metals, 85 (5-6), 459–487. doi:10.1007/s11085-015-9607-7
  1478. Kupfer- und Eisenoxide als Konversions-Elektrodenmaterialien für Lithium-Ionen-Batterien: Thermodynamische und Elektrochemische Untersuchungen. PhD dissertation
    Lepple, M.
    2016. KIT Scientific Publishing. doi:10.5445/KSP/1000051891
  1479. Experimental program QUENCH at KIT on core degradation during reflooding under LOCA conditions and in the early phase of a severe accident
    Stuckert, J.; Steinbrueck, M.; Grosse, M.
    2015. "Modelling of Water Cooled Fuel Including Design Basis and Severe Accidents", Chengdu, China, 28 October–1 November 2013, 281–297, IAEA
  1480. Plasmaquelle
    Schweiger, S.; Ye, J.; Ulrich, S.
    2015. doi:10.5445/DIVA/2015-669
  1481. Plasma source
    Schweiger, S.; Ye, J.; Ulrich, S.
    2015. doi:10.5445/DIVA/2015-668
  1482. Scaling Kinetics and Scale Microstructure of Chromia Scales Formed on Ni-25%Cr Model Alloy during Oxidation in H 2 o-Containing High and Low pO 2 Test Gas at 1000°C
    Hänsel, M.; Shemet, V.; Turan, E.; Kijatkin, I.; Simon, D.; Gorr, B.; Christ, H.-J.
    2015. ECS Transactions, 66 (18), 1–21. doi:10.1149/06618.0001ecst
  1483. Microstructure and Oxidation Mechanism Evolution of Co–17Re–25Cr–2Si in the Temperature Range 800–1,100 °C
    Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
    2015. Oxidation of Metals, 83 (5-6), 465–483. doi:10.1007/s11085-014-9515-2
  1484. Effect of specimen thickness on chromia scaling of Ni25Cr in N 2 –O 2 –H 2 O test gases at 1000°C
    Hänsel, M.; Turan, E.; Shemet, V.; Grüner, D.; Breuer, U.; Simon, D.; Gorr, B.; Christ, H.-J.; Quadakkers, W. J.
    2015. Materials at High Temperatures, 32 (1-2), 160–166. doi:10.1179/0960340914Z.00000000092
  1485. Effect of in-situ gas changes on thermally grown chromia scales formed on Ni–25Cr alloy at 1000°C in atmospheres with and without water vapour
    Simon, D.; Gorr, B.; Hänsel, M.; Shemet, V.; Christ, H.-J.; Quadakkers, W. J.
    2015. Materials at High Temperatures, 32 (1-2), 238–247. doi:10.1179/0960340914Z.000000000108
  1486. Results of the commissioning bundle test QUENCH-L0 performed under LOCA conditions. (SR-7571)
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000083018
  1487. Alternative Herstellung von elektrischen Leitern in der Mikrotechnik : Herstellung von Leiterbahnen für die Versorgung von Leistungselektronik auf keramischen Bauteilen = Alternative manufacturing of electrical conductors in microtechnology - Conductor tracks for energy supply of power electronics on ceramic components
    Matuschka, B.; Granser, T.; Rohde, M.; Schulze, V.; Seifert, H. J.
    2015. wt Werkstattstechnik online, 105 (11-12), 800–804
  1488. Status, Operation, and Extension of the ECRH System at ASDEX Upgrade
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Rapson, C. J.; Reich, M.; Schubert, M.; Schütz, H.; Treutterer, W.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Gantenbein, G.; Jelonnek, J.; Kasparek, W.; Lechte, C.; Plaum, B.; Goodman, T.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Zapevalov, V.; Malygin, V.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2015. (Team, Asdex Upgrade, Ed.) Journal of infrared, millimeter, and terahertz waves, 37 (1), 45–54. doi:10.1007/s10762-015-0187-z
  1489. Corrosion resistance of Al-based coatings in flowing Pb-15.7Li produced by aluminum electrodeposition from ionic liquids
    Wulf, S. E.; Krauss, W.; Konys, J.
    2015. ICFRM-17, Aachen, 11.-16.10.2015
  1490. Long-term corrosion behavior of ODS-Eurofer in flowing Pb-15.7Li at 550°C
    Krauss, W.; Wulf, S.-E.; Konys, J.
    2015. ICFRM-17, Aachen, 11.-16.10.2015
  1491. Thermodynamic Investigations in the Cu-Co-O System
    Mayer, N. A.; Cupid, D. M.; Franke, P.; Seifert, H. J.
    2015. CALPHAD Conference, May 31 - June 5, 2015, Loano, Italy
  1492. Thermodynamic Investigations in the Cu-Co-O System
    Mayer, N. A.; Cupid, D. M.; Gotcu-Freis, P.; Franke, P.; Seifert, H. J.
    2015. European Congress and Exhibition on Advanced Materials and Processes, September 20-24, 2015, Warsaw, Poland
  1493. Martensitic transformation in Eurofer-97 and ODS-Eurofer steels: A comparative study
    Zilnyk, K. D.; Oliveira, V. B.; Sandim, H. R. Z.; Möslang, A.; Raabe, D.
    2015. Journal of nuclear materials, 462, 360–367. doi:10.1016/j.jnucmat.2014.12.112
  1494. Thermomechanical characterization of joints for blanket and divertor application processed by electrochemical plating
    Krauss, W.; Lorenz, J.; Konys, J.; Basuki, W.; Aktaa, J.
    2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
  1495. Advanced Electrochemical Machining (ECM) for tungsten surface micro-structuring in blanket applications
    Holstein, N.; Krauss, W.; Lorenz, J.; Konys, J.
    2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
  1496. Compatibility of structural steels with heavy liquid metals (HLMs): From a cross-cutting view
    Konys, J.
    2015. MatiSSE Workshop on Cross-Cutting Issues in Structural Materials R&D, Petten, NL, November 25-26, 2015
  1497. Materials compatibility in heavy liquid metals for ADS applications
    Konys, J.
    2015. 1st Topical Meeting on Asian Network for Accelerator-Driven Systems and Nuclear Transmutation Technology, Tokai, J, October 26-27, 2015
  1498. Corrigendum to "chemical composition of nano-phases studied by anomalous small-angle X-ray: Application to oxide nano-particles in ODS steels" [Mater. Charact. 87 (2013) pp. 138-142]
    Dumont, M.; Commin, L.; Morfin, I.; De Geuser, F.; Legendre, F.; Maugis, P.
    2015. Materials characterization, 102, 221–221. doi:10.1016/j.matchar.2015.02.007
  1499. Tensile behavior of EUROFER ODS steel after neutron irradiation up to 16.3 dpa between 250 and 450 °c
    Materna-Morris, E.; Lindau, R.; Schneider, H.-C.; Möslang, A.
    2015. Fusion engineering and design, 98-99, 2038–2041. doi:10.1016/j.fusengdes.2015.07.015
  1500. Design validation of the ITER EC upper launcher according to codes and standards
    Spaeh, P.; Aiello, G.; Gagliardi, M.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2015. Fusion engineering and design, 98-99, 1620–1624. doi:10.1016/j.fusengdes.2015.06.028
  1501. Initial DEMO tokamak design configuration studies
    Bachmann, C.; Aiello, G.; Albanese, R.; Ambrosino, R.; Arbeiter, F.; Aubert, J.; Boccaccini, L.; Carloni, D.; Federici, G.; Fischer, U. b; Kovari, M.; Li Puma, A.; Loving, A.; Maione, I.; Mattei, M.; Mazzone, G.; Meszaros, B.; Palermo, I.; Pereslavtsev, P.; Riccardo, V.; Sardain, P.; Taylor, N.; Villari, S.; Vizvary, Z.; Vaccaro, A.; Visca, E.; Wenninger, R.
    2015. Fusion engineering and design, 98-99, 1423–1426. doi:10.1016/j.fusengdes.2015.05.027
  1502. The upgraded Collective Thomson Scattering diagnostics of FTU
    Bin, W.; Bruschi, A.; D’Arcangelo, O.; Grosso, G.; Lubiako, L.; Tartari, U.; Figini, L.; Garavaglia, S.; Grossetti, G.; Moro, A.; Orsitto, F.; Centioli, C.; Galperti, C.; Granucci, G.; Mellera, V.; Minelli, D.; Nardone, A.; Simonetto, A.; Vellucci, M.
    2015. Fusion engineering and design, 96-97, 733–737. doi:10.1016/j.fusengdes.2015.05.022
  1503. The design status of the liquid lithium target facility of IFMIF at the end of the engineering design activities
    Nitti, F. S.; Ibarra, A.; Ida, M.; Favuzza, P.; Furukawa, T.; Groeschel, F.; Heidinger, R.; Kanemura, T.; Knaster, J.; Kondo, H.; Micchiche, G.; Sugimoto, M.; Wakai, E.
    2015. Fusion engineering and design, 100, 425–430. doi:10.1016/j.fusengdes.2015.07.012
  1504. Needs and gaps in the development of aluminum-based corrosion and T-permeation barriers for DEMO blankets
    Wulf, S.-E.; Krauss, W.; Konys, J.
    2015. Fusion Engineering and Design, 98-99, 2098–2102. doi:10.1016/j.fusengdes.2015.04.057
  1505. Formation of nanostructures by femtosecond laser processing
    Zheng, Y.; Proll, J.; Seifert, H. J.; Pfleging, W.
    2015. 5th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2015, Changchun, China, 329–333, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2015.7425522
  1506. Phosphate based ceramics as solid electrolyte for high temperature lithium ion batteries
    Cui, Y.; Rohde, M.; Mahmoud, M. M.; Ziebert, C.; Seifert, H. J.
    2015. Energy, Science and Technology 2015. The energy conference for scientists and researchers. Book of Abstracts, EST, Energy Science Technology, International Conference & Exhibition, 20-22 May 2015, Karlsruhe, Germany, 335, Karlsruher Institut für Technologie (KIT)
  1507. Status of the ITER Electron Cyclotron Heating and Current Drive System
    Darbos, C.; Albajar, F.; Bonicelli, T.; Carannante, G.; Cavinato, M.; Cismondi, F.; Denisov, G.; Farina, D.; Gagliardi, M.; Gandini, F.; Gassmann, T.; Goodman, T.; Hanson, G.; Henderson, M. A.; Kajiwara, K.; McElhaney, K.; Nousiainen, R.; Oda, Y.; Omori, T.; Oustinov, A.; Parmar, D.; Popov, V. L.; Purohit, D.; Rao, S. L.; Rasmussen, D.; Rathod, V.; Ronden, D. M. S.; Saibene, G.; Sakamoto, K.; Sartori, F.; Scherer, T.; Singh, N. P.; Strauß, D.; Takahashi, K.
    2015. Journal of Infrared, Millimeter, and Terahertz Waves, 37 (1), 4–20. doi:10.1007/s10762-015-0211-3
  1508. Monitoring the thin film formation during sputter deposition of Vanadium Carbide
    Kaufholz, M.; Krause, B.; Kotapati, S.; Köhl, M.; Mantilla, M. F.; Stüber, M.; Ulrich, S.; Schneider, R.; Gerthsen, D.; Baumbach, T.
    2015. Journal of synchrotron radiation, 22 (1), 76–85. doi:10.1107/S1600577514024412
  1509. Microwave crystallization of phosphate based glass for Li-ion batteries application
    Mahmoud, M. M.; Cui, Y.; Ziebert, C.; Rohde, M.; Link, G.; Seifert, H. J.
    2015. Materials Science and Technology (MS & T 2015), Columbus, Ohio, October 4-8, 2015
  1510. Kupfer- und Eisenoxide als Konversions-Elektrodenmaterialien für Lithium-Ionen-Batterien: Thermodynamische und Elektrochemische Untersuchungen. PhD dissertation
    Lepple, M.
    2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000051813
  1511. Preliminary conceptual design of DEMO EC system
    Garavaglia, S.; Bin, W.; Bruschi, A.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Moro, A.; Rispoli, N.; Strauss, D.; Tran, Q. M.; Franke, T.
    2015. 21st Topical Conference on Radiofrequency Power in Plasmas, Lake Arrowhead, Calif., April 27-29, 2015
  1512. Preliminary conceptual design of DEMO EC system
    Garavaglia, S.; Bin, W.; Bruschi, A.; Granucci, G.; Grossetti, G.; Jelonnek, J.; Moro, A.; Rispoli, N.; Strauss, D.; Tran, Q. M.; Franke, T.
    2015. Proceedings of the 21st Topical Conference on Radiofrequency Power in Plasmas, Lake Arrowhead, Calif., April 27-29, 2015, 09009/1–4, American Institute of Physics (AIP). doi:10.1063/1.4936546
  1513. Proposal of a simple model describing the kinetics of the reaction of zirconium with air and steam/nitrogen gas mixture derived from an atomistic description of the process
    Grosse, M.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1514. Results of neutron imaging investigations of QUENCH-LOCA claddings
    Grosse, M.; Roessger, C.; Muttini, E.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1515. Post-test investigations of the Quench-Loca-4 bundle (hydrogenated M5(Registered) claddings)
    Stuckert, J.; Große, M.; Pshenichnikov, A.; Rössger, C.; Walter, M.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1516. First results of the bundle test QUENCH-L3 with optimized ZIRLO™ claddings
    Stuckert, J.; Große, M.; Moch, J.; Rössger, C.; Steinbrück, M.; Walter, M.
    2015. 21st International QUENCH Workshop (2015), Karlsruhe, Germany, October 27–29, 2015
  1517. Orientation relationships of δ-hydrides in Zirconium and Zircaloy-4
    Pshenichnikov, A.; Stuckert, J.; Walter, M.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1518. High temperature steam oxidation behavior of potential cladding materials FeCrAl alloy and Ti₂AlC MAX phase
    Tang, C.; Steinbrück, M.; Große, M.; Jianu, A.; Weisenburger, A.; Seifert, H. J.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1519. The effect of flow rate and partial pressure on the oxidation of zircaloy-4 in N₂-steam mixtures
    Sung, J.; Steinbrück, M.; Große, M.; Lee, J.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1520. Update of the Quench programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1521. Effect of nitriding and reoxidation of pre-oxidized zircaloy-4
    Park, S.; Fernandez-Moguel, L.; Birchley, J.; Prasser, H. M.; Steinbrück, M.; Rinke, M.; Seifert, H. J.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1522. The effect of flow rate and partial pressure on the oxidation of Zry-4 in air
    Maeng, Y.; Steinbrück, M.; Große, M.; Lee, J.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1523. Porosimetry of Zr-based fuel claddings oxidized in nuclear severe accident conditions
    Haurais, F.; Beuzet, E.; Steinbrück, M.; Wu, Y.; Ambard, A.; Simoni, E.; Torkhani, M.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1524. Silicon carbide composites tests for GFRs in the frame of the MatISSE project
    Avincola, V. A.; Kinay, D.; Stegmmaier, U.; Steinbrück, M.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1525. Potential of glasses as solders for joining of silicon carbide components via laser process
    Ahmad, S.; Mahmoud, M. M.; Steinbrück, M.; Seifert, H. J.; Herrmann, M.; Lippmann, W.
    2015. 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015
  1526. Effect of nitriding during an air ingress scenario
    Park, S.; Fernandez-Moguel, L.; Prasser, H. M.; Birchley, J.; Steinbrück, M.; Seifert, H. J.
    2015. TopFuel 2015, Zürich, CH, September 13-17, 2015
  1527. Proposal of a simple model describing the kinetics of the reaction of zirconium with air and steam/nitrogen gas mixture derived from an atomistic description of the process
    Grosse, M.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1528. Results of neutron imaging investigations of QUENCH-LOCA claddings
    Grosse, M.; Roessger, C.; Muttini, E.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1529. High temperature steam oxidation behavior of potential cladding materials FeCrAl alloy and Ti₂AlC MAX phase
    Tang, C.; Steinbrück, M.; Große, M.; Jianu, A.; Weisenburger, A.; Seifert, H. J.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1530. The effect of flow rate and partial pressure on the oxidation of zircaloy-4 in N₂-steam mixtures
    Sung, J.; Steinbrück, M.; Große, M.; Lee, J.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1531. Update of the Quench programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2015. Steinbrück, M. [Hrsg.] Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015, Karlsruher Institut für Technologie (KIT)
  1532. Effect of nitriding and reoxidation of pre-oxidized zircaloy-4
    Park, S.; Fernandez-Moguel, L.; Birchley, J.; Prasser, H. M.; Steinbrück, M.; Rinke, M.; Seifert, H. J.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1533. The effect of flow rate and partial pressure on the oxidation of Zry-4 in air
    Maeng, Y.; Steinbrück, M.; Große, M.; Lee, J.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1534. Porosimetry of Zr-based fuel claddings oxidized in nuclear severe accident conditions
    Haurais, F.; Beuzet, E.; Steinbrück, M.; Wu, Y.; Ambard, A.; Simoni, E.; Torkhani, M.
    2015. Steinbrück, M. [Hrsg.] Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015, Karlsruher Institut für Technologie (KIT)
  1535. Silicon carbide composites tests for GFRs in the frame of the MatISSE project
    Avincola, V. A.; Kinay, D.; Stegmmaier, U.; Steinbrück, M.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1536. Potential of glasses as solders for joining of silicon carbide components via laser process
    Ahmad, S.; Mahmoud, M. M.; Steinbrück, M.; Seifert, H. J.; Herrmann, M.; Lippmann, W.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1537. Effect of nitriding during an air ingress scenario
    Park, S.; Fernandez-Moguel, L.; Prasser, H. M.; Birchley, J.; Steinbrück, M.; Seifert, H. J.
    2015. TopFuel 2015, Zürich, CH, September 13-17, 2015 Conference Proceedings Part II, 380–390, European Nuclear Society
  1538. Modeling hydrogen ad- and desorption on beryllium-(0001)-surface
    Stihl, C.; Bachurin, D.; Vladimirov, P.
    2015. 12th International Conference on the Mechanical Behavior of Materials (ICM-12), Karlsruhe, May 10-14, 2015
  1539. Multiscale modeling of hydrogen behavior on beryllium-(0001)-surface
    Stihl, C.; Bachurin, D.; Vladimirov, P.; Möslang, A.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1540. Cladding oxidation during air ingress. Part I: Experiments on air ingress
    Stuckert, J.; Hozer, Z.; Kiselev, A.; Steinbrück, M.
    2015. 7th Conference on Severe Accident Research (ERMSAR 2015), Marseille, F, March 24-26, 2015
  1541. Porosimetry of ZrO₂ scales formed during oxidation of Zr-based fuel claddings in nuclear severe accident conditions
    Haurais, F.; Beuzet, E.; Steinbrück, M.; Wu, Y.; Ambard, A.; Simoni, E.; Torkhani, M.
    2015. 24th International Conference Nuclear Energy for New Europe (NENE-2015), Portoroz, SLO, September 14-17, 2015
  1542. Porosimetry of zirconia scales formed during oxidation of Zr-based fuel claddings in steam and air-steam mix at high temperatures
    Haurais, F.; Beuzet, E.; Steinbrück, M.; Ambard, A.; Simoni, E.
    2015. 7th Conference on Severe Accident Research (ERMSAR 2015), Marseille, F, March 24-26, 2015
  1543. Cladding oxidation during air ingress. Part I: Experiments on air ingress
    Stuckert, J.; Hozer, Z.; Kiselev, A.; Steinbrück, M.
    2015. 7th Conference on Severe Accident Research (ERMSAR 2015), Marseille, F, March 24-26, 2015. Proceedings, Paper 038bis
  1544. First results of the bundle test Quench-L3 with optimized Zirlosup(T)sup(M) claddings
    Stuckert, J.; Große, M.; Moch, J.; Rössger, C.; Steinbrück, M.; Walter, M.
    2015. Steinbrück, M. [Hrsg.] Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015, Karlsruher Institut für Technologie (KIT)
  1545. Post-test investigations of the Quench-Loca-4 bundle (hydrogenated M5(Registered) claddings)
    Stuckert, J.; Große, M.; Pshenichnikov, A.; Rössger, C.; Walter, M.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1546. Orientation relationships of δ-hydrides in Zirconium and Zircaloy-4
    Pshenichnikov, A.; Stuckert, J.; Walter, M.
    2015. Proceedings of the 21th International QUENCH Workshop, Karlsruhe, October 27-29, 2015. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1547. Flexible sample environment for high resolution neutron imaging at high temperatures in controlled atmosphere
    Makowaka, M. G.; Kuhn, L. T.; Cleemann, L. N.; Lauridsen, E. M.; Bilheux, H. Z.; Molaison, J. J.; Santodonato, L. J.; Tremsin, A. S.; Grosse, M.; Morgano, M.; Kabra, S.; Strobl, M.
    2015. Review of scientific instruments, 86 (12), Art. Nr. 125109. doi:10.1063/1.4937615
  1548. Polymorphism of M₃AlX Phases (M = Ti, Zr, Hf; X = C, N) and thermomechanical properties of Ti₃AlN polymorphs
    Zhang, Y.; Franke, P.; Seifert, H. J.; Wang, J.
    2015. Journal of the American Ceramic Society, 98, 2570–2578. doi:10.1111/jace.13602
  1549. Themophysical properties of pyrochlore and fluorite phases in the Ln₂Zr₂O₇-Y₂O₃ systems (Ln = La, Nd, Sm): 2. Comparison of conventionally sintered and SPS samples in the systems Nd₂Zr₂O₇-Y₂O₃ and Sm₂Zr₂O₇-Y₂O₃
    Fabrichnaya, O.; Wulf, R.; Kriegel, M. J.; Savinykh, G.; Dopita, M.; Seidel, J.; Heitz, H. C.; Nashed, O.; Gross, U.; Seifert, H. J.
    2015. Journal of alloys and compounds, 625, 200–207. doi:10.1016/j.jallcom.2014.11.133
  1550. Electron cyclotron waves for current drive and neo-classical tearing mode mitigation in a DEMO machine
    Grossetti, G.; Jelonnek, J.; Poli, E.; Strauß, D.; Vaccaro, A.; Zohm, H.
    2015. Proceedings of the 40th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2015), Hong Kong, China, August 23-28, 2015, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2015.7327865
  1551. Oxidation at high temperatures in steam atmosphere and quench of silicon carbide composites for nuclear application
    Avincola, V. A.; Grosse, M.; Stegmaier, U.; Steinbrück, M.; Seifert, H. J.
    2015. Nuclear engineering and design, 395, 468–478. doi:10.1016/j.nucengdes.2015.10.002
  1552. Thermodynamic modeling of the silica volatilization in steam related to silicon carbide oxidation
    Avincola, V. A.; Cupid, D.; Seifert, H. J.
    2015. Journal of the European Ceramic Society, 35, 3809–3818. doi:10.1016/j.jeurceramsoc.2015.05.036
  1553. Tritium release from highly neutron irradiated constrained and unconstrained beryllium pebbles
    Chakin, V.; Rolli, R.; Vladimirov, P.; Möslang, A.
    2015. Fusion engineering and design, 95, 59–66. doi:10.1016/j.fusengdes.2015.04.027
  1554. Tritium and helium release from highly neutron irradiated titanium beryllide
    Chakin, V.; Rolli, R.; Möslang, A.; Kurinskiy, P.
    2015. Fusion engineering and design, 98-99, 1728–1732. doi:10.1016/j.fusengdes.2015.01.038
  1555. Ability of current advanced codes to predict in-vessel core melt progression and degraded core coolability. Benchmark exercise on the Three Mile Island-2 plant
    Chatterjee, B.; Lele, H. G.; Bandini, G.; Austregesilo, H.; Weber, S.; Kapustin, A.; Dolganov, K.; Tomashchik, D.; Gencheva, R.; Groudev, P.; Stefanova, A.; Drai, P.; Matejovic, P.; Barnak, M.; Muscher, H.; Madokoro, H.; Hoffmann, M.; Bulle, J.; Sallus, L.
    2015. Final Report NEA/CSNI/R(2015)3 (June 2015)
  1556. ICM: Insights in microstructure of austenitic ods steels
    Gräning, T.; Hoffmann, J.; Klimenkov, M.; Rieth, M.; Möslang, A.
    2015. 12th International Conference on the Mechanical Behavior of Materials (ICM 2015), Karlsruhe, Germany, May 10–14, 2015
  1557. Creep in directionally solidified NiAl-X (Cr, Mo) composites and their microstructural analysis
    Krüger, A.; Sprenger, I.; Klimenkov, M.; Heilmaier, M.; Möslang, A.
    2015. 13th International Conference on Creep and Fracture of Engineering Materials and Structures (CREEP 2015), Toulouse, F, May 31 - June 4, 2015
  1558. Microstructural investigation of the intermetallic composites NiAl-(34-x)Cr-xMo before and after creep
    Krüger, A.; Sprenger, I.; Klimenkov, M.; Hellmaier, M.; Möslang, A.
    2015. Intermetallics 2015, Bad Staffelstein, September 28 - October 2, 2015
  1559. ASTEC modeling aspects of QUENCH bundle tests on air ingress
    Muscher, H.
    2015. CESAM Project 2nd Periodic Workshop, Bologna, I, February 23-26, 2015
  1560. Ab-initio study of hydrogen on beryllium surfaces
    Bachurin, D. V.; Vladimirov, P. V.
    2015. Proceedings of the 11th IEA International Workshop on Beryllium Technology (BeWS-11), Barcelona, Spain, 12-13 September 2013., 159–168, KIT Scientific Publishing
  1561. Interaction of dislocation tripoles with a standing sound wave
    Murzaev, R. T.; Bachurin, D. V.; Nazarov, A. A.
    2015. The physics of metals and metallography, 116 (10), 1057–1065. doi:10.1134/S0031918X15100105
  1562. Ab initio study of hydrogen on beryllium surfaces
    Bachurin, D. V.; Vladimirov, P. V.
    2015. Surface science, 641, 198–203. doi:10.1016/j.susc.2015.07.008
  1563. Advanced steels for water cooled applications
    Hoffmann, J.; Rieth, M.
    2015. European Fusion Programme Workshop 2015, Bled, SLO, November 30 - December 2, 2015
  1564. Thermophysical properties of oxide cathode materials for lithium-ion batteries
    Gotcu-Freis, P.; Seifert, H. J.
    2015. EMN Meeting on Photocatalysis, Las Vegas, Nev., November 21-24, 2015
  1565. Improvement of RAFM steels through thermo-mechanical treatments
    Hoffmann, J.; Rieth, M.; Commin, L.; Fernandez, P.; Roldan, M.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1566. Processing and properties of advanced ceramics and composites VII
    Mahmoud, M. M.; Bhalla, A. S.; Bandal, N. P.; Singh, J. P.; Castro, R. H. R.; Manjooran, N. J.; Pickrell, G.; Johnson, S.; Brennecka, G.; Singh, G.; Zhu, D.
    2015. John Wiley and Sons
  1567. Microstructural anisotropy of ferritic ODS alloys after different production routes
    Hoffmann, J.; Rieth, M.; Commin, L.; Antusch, S.
    2015. Fusion engineering and design, 98-99, 1986–1990. doi:10.1016/j.fusengdes.2015.05.002
  1568. New experimental heat capacity and enthalpy of formation of lithium cobalt oxide
    Gotcu-Freis, P.; Cupid, D. M.; Rohde, M.; Seifert, H. J.
    2015. The journal of chemical thermodynamics, 84, 118–127. doi:10.1016/j.jct.2014.12.007
  1569. Crystallisation studies of Si₃N₄-Al₂O₃-SiO₂-Y₂O₃ glass-ceramics under different heat-treatment conditions
    Ahmad, S.; Ludwig, T.; Herrmann, M.; Mahmoud, M. M.; Lippmann, W.; Seifert, H. J.
    2015. Journal of the European Ceramic Society, 35, 2261–2268. doi:10.1016/j.jeurceramsoc.2015.02.018
  1570. Microwave rapid conversion of sol gel-derived hydroxyapatite into β-tricalcium phosphate
    Hassan, M. N.; Mahmoud, M. M.; Abd El-Fattah, A.; Kandil, S.
    2015. Journal of sol gel science and technology, 76 (1), 74–81. doi:10.1007/s10971-015-3753-x
  1571. Femtosecond laser structuring of novel electrodes for 3D fuel cell design with increased reaction surface
    Faubert, P.; Müller, C.; Reinecke, H.; Smyrek, P.; Pröll, J.; Pfleging, W.
    2015. Materials Research Society Spring Meeting 2015, San Francisco, Calif., April 6-10, 2015
  1572. Manufacturing of advanced Li(NiMnCo)O₂ electrodes for lithium-ion batteries
    Smyrek, P.; Pröll, J.; Rakebrandt, J. H.; Seifert, H. J.; Pfleging, W.
    2015. SPIE Photonics West, San Francisco, Calif., February 7-12, 2015
  1573. Surface micro-structuring of intercalation cathode materials for lithium-ion batteries a study of laser-assisted cone formation
    Pfleging, W.; Smyrek, P.; Hund, J.; Bergfeldt, T.; Pröll, J.
    2015. SPIE Photonics West, San Francisco, Calif., February 7-12, 2015
  1574. Femtosecond laser patterning of lithium-ion battery separator materials: impact on liquid electrolyte wetting and cell performance
    Pröll, J.; Schmitz, B.; Niemöller, A.; Robertz, B.; Schäfer, M.; Torge, M.; Smyrek, P.; Seifert, H. J.; Pfleging, W.
    2015. SPIE Photonics West, San Francisco, Calif., February 7-12, 2015
  1575. Electrochemical and kinetic studies of ultrafast laser structured LiFePO₄ electrodes
    Mangang, M.; Gotcu-Freis, P.; Seifert, H. J.; Pfleging, W.
    2015. SPIE Photonics West, San Francisco, Calif., February 7-12, 2015
  1576. Laser-assisted materials processing for the development and production of optimized lithium-ion batteries
    Pfleging, W.; Mangang, M.; Smyrek, P.; Pröll, J.
    2015. 24.Internationale wissenschaftliche Konferenz Mittweida, 19.-20.November 2015
  1577. Liquie-metal corrosion of steel in HLM
    Schroer, C.
    2015. Heavy Liquid Metal Summer School, Mol, B, June 15-19, 2015
  1578. Effect of post-weld heat treatment on microstructure, hardness and impact toughness at 77 K of electron beam welds of NIFS-HEAT-2 and CEA-J57 heats of V-4Ti-4Cr alloy
    Tsisar, V.; Nagasaka, T.; Le Flem, M.; Yeliseyeva, O.; Konys, J.; Muroga, T.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1579. Femtosecond laser structuring of novel electrodes for 3D fuel cell design with increased reaction surface
    Faubert, P.; Müller, C.; Reinecke, H.; Smyrek, P.; Pröll, J.; Pfleging, W.
    2015. The Development of Oxygen Reduction Reaction (ORR) and Oxygen Evolution Reaction (OER) Materials in Energy Storage and Conversion Systems : Proceedings of Symposium K of theMaterials Research Society Spring Meeting 2015, San Francisco, CA, April 6-10, 2015. Ed.: E. Roduner, 7–13, MRS. doi:10.1557/opl.2015.507
  1580. Manufacturing of advanced Li(NiMnCo)O₂ electrodes for lithium-ion batteries
    Smyrek, P.; Pröll, J.; Rakebrandt, J. H.; Seifert, H. J.; Pfleging, W.
    2015. Laser-based Micro- and Nanoprocessing IX : Proceedings of SPIE Photonics West, San Francisco, Calif., February 7-12, 2015. Ed.: U. Klotzbach, Paper 93511D, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2078160
  1581. Surface micro-structuring of intercalation cathode materials for lithium-ion batteries a study of laser-assisted cone formation
    Pfleging, W.; Smyrek, P.; Hund, J.; Bergfeldt, T.; Pröll, J.
    2015. Laser-based Micro- and Nanoprocessing IX : Proceedings of SPIE Photonics West, San Francisco, Calif., February 7-12, 2015. Ed.: U. Klotzbach, Article no 93511E, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2077763
  1582. Femtosecond laser patterning of lithium-ion battery separator materials: impact on liquid electrolyte wetting and cell performance
    Pröll, J.; Schmitz, B.; Niemöller, A.; Robertz, B.; Schäfer, M.; Torge, M.; Smyrek, P.; Seifert, H. J.; Pfleging, W.
    2015. Laser-based Micro- and Nanoprocessing IX : Proceedings of SPIE Photonics West, San Francisco, Calif., February 7-12, 2015. Ed.: U. Klotzbach, Article no 93511F, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2079018
  1583. Electrochemical and kinetic studies of ultrafast laser structured LiFePO₄ electrodes
    Mangang, M.; Gotcu-Freis, P.; Seifert, H. J.; Pfleging, W.
    2015. Laser-based Micro- and Nanoprocessing IX : Proceedings of SPIE Photonics West, San Francisco, Calif., February 7-12, 2015. Ed.: U. Klotzbach, Article no 93510K, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2078900
  1584. Laser-assisted materials processing for the development and production of optimized lithium-ion batteries
    Pfleging, W.; Mangang, M.; Smyrek, P.; Pröll, J.
    2015. Scientific Reports : Journal of the University of Applied Sciences Mittweida = Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH), (4), 1–4
  1585. Thermal behavior and electrochemical heat generation in a commercial 40 Ah lithium ion pouch cell
    Schuster, E.; Ziebert, C.; Melcher, A.; Rohde, M.; Seifert, H. J.
    2015. Journal of power sources, 286, 580–589. doi:10.1016/j.jpowsour.2015.03.170
  1586. Laser surface textured titanium alloy (Ti-6Al-4V) : Part 2 - Studies on bio-compatibility
    Kumari, R.; Scharnweber, T.; Pfleging, W.; Besser, H.; Majumdar, J. D.
    2015. Applied surface science, 357 (Part A), 750–758. doi:10.1016/j.apsusc.2015.08.255
  1587. Laser surface textured titanium alloy (Ti-6Al-4V): Part 1 - Surface characterization
    Pfleging, W.; Kumari, R.; Besser, H.; Scharnweber, T.; Majumdar, J. D.
    2015. Applied surface science, 355, 104–111. doi:10.1016/j.apsusc.2015.06.175
  1588. A polymerized C₆₀ coating enhancing interfacial stability at three-dimensional LiCoO₂ in high-potential regime
    Hudaya, C.; Halim, M.; Pröll, J.; Besser, H.; Choi, W.; Pfleging, W.; Seifert, H. J.; Lee, J. K.
    2015. Journal of power sources, 298, 1–7. doi:10.1016/j.jpowsour.2015.08.044
  1589. Three-dimensional silicon/carbon core-shell electrode as an anode material for lithium-ion batteries
    Kin, J. S.; Pfleging, W.; Kohler, R.; Seifert, H. J.; Kim, T. Y.; Byun, D.; Jung, H. G.; Choi, W.; Lee, J. K.
    2015. Journal of power sources, 279, 13–20. doi:10.1016/j.jpowsour.2014.12.041
  1590. A new high performance micro wave plasma source
    Ulrich, S.; Ye, J.; Stüber, M.; Leiste, H.
    2015. robeko Hausmesse und Workshop für Plasmatechnologie, Münchweiler, 29.September - 1.Oktober 2015
  1591. New HiPIMS - microwave plasma source - hybrid technology for tribological and protective coatings
    Ulrich, S.; Ye, J.; Stüber, M.; Leiste, H.
    2015. 10th Asian-European International Conference on Plasma Surface Engineering (AEPSE2015), Jeju, Korea, September 20-24, 2015
  1592. Entwicklung einer Hochleistungsmikrowellenplasmaquelle und Integration derselben in eine industrielle Beschichtungsanlage
    Ulrich, S.; Ye, J.; Schweiger, S.; Stüber, M.; Leiste, H.
    2015. Treffen der INPLAS Arbeitsgruppe ’Neuartige Plasmaquellen und -prozesse’, Alzenau, 19.März 2015
  1593. Festkörper Dünnschicht Lithium-Ionen Batterien
    Ulrich, S.; Fischer, J.; Stragela, M.; Seemann, K.; Leiste, H.; Stüber, M.; Seifert, H. J.
    2015. Vakuum-Beschichtung und Plasma-Oberflächentechnik (V2015), Workshop 3, ’Dünnschicht-Technologie für Energiesysteme’, Dresden, 12.-15.Oktober 2015
  1594. Ausgewählte nanoskalige Mikrostruktur-Eigenschafts-Korrelationen von Hartstoffschichten
    Ulrich, S.; Ziebert, C.; Stüber, M.; Leiste, H.
    2015. EFDS Workshop ’Morphologie und Mikrostruktur Dünner Schichten und deren Beeinflussung’, Dresden, Deutschland, 12. März 2015
  1595. Nanoskalige Hochleistungsschutzschichten zum Surface Engineering von Zerspan- und Umformwerkzeugen
    Ulrich, S.; Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.
    2015. Werkstoffwoche, Dresden, 14.-17. September 2015
  1596. Influence of the substrate topography on the constitution of Li-rich Li-Ni-Mn-Co-O thin film for battery application
    Strafela, M.; Seemann, K.; Leiste, H.; Seifert, H. J.; Ulrich, S.
    2015. 9th Symposium on Vacuum Based Science and Technology, Kolobrzeg, PL, November 17-19, 2015
  1597. Combined XRD and EXAFS study of Cr-Al-N gradient samples
    Krause, B.; Stüber, M.; Zimina, A.; Trappen, M.; Steininger, R.; Ulrich, S.; Kotapati, S.; Mangold, S.; Ye, J.; Baumbach, T.
    2015. 16th International Conference on X-Ray Absorption Fine Structure (XAFS16), Karlsruhe, August 23-28, 2015
  1598. Magnetic properties of square Py nanowires: Irradiation dose and geometry dependence
    Ehrmann, A.; Blachowicz, T.; Komraus, S.; Nees, M. K.; Jakobs, P. J.; Leiste, H.; Mathes, M.; Schaarschmidt, M.
    2015. Journal of applied physics, 117, 173903/1–5. doi:10.1063/1.4919839
  1599. Hot extrusion of Be-Ti powder
    Kurinskiy, P.; Leiste, H.; Goraieb, A. A.; Mueller, S.
    2015. Fusion engineering and design, 98-99, 1817–1820. doi:10.1016/j.fusengdes.2015.04.037
  1600. Thin-film calorimetry: Analytical tool for in-situ characterization of lithium ion batteries
    Wulfmeier, H.; Albrecht, D.; Fischer, J.; Ivanov, S.; Bund, A.; Ulrich, S.; Fritze, H.
    2015. Connections / Athena papers, 162, A727-A736. doi:10.1149/2.0741504jes
  1601. Phase field crystal modeling of ternary solidification microstructures
    Berghoff, M.; Nestler, B.
    2015. Computational condensed matter, 4, 46–58. doi:10.1016/j.cocom.2015.08.002
  1602. Innovative materials and processes for liquid metal energy conversion systems (HEMCP-AMTEC)
    Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Weisenburger, A.; Müller, G.
    2015. Kolloquium zur offiziellen Eröffnung der Helmholtz Energy Materials Characterization Platform (HEMCP), Jülich, 20.November 2015
  1603. Structural materials lifetime assessment through modelling and experimental validation: The EUROFusion IREMEV project
    Dudarev, S. L.; Rieth, M.; Diegele, E.; Apostolopoulos, G.; De Backer, A.; Barthe, M. F.; Becquart, C. S.; Caillard, D.; Caturla, M. J.; Dubiel, S. M.; Dupuy, L. M.; Fernandez, P.; Fu, C. C.; Gaganidze, E.; Gilbert, M. R.; Klimenkov, M.; Ma, P. W.; Marinica, M. C.; Mason, D.; Mergia, K.; Meslin, E.; Nguyen-Manh, D.; Nordlund, K.; Olsson, P.; Ortiz, C. J.; Proville, L.; Radiguet, B.; Rio, E. del; Robertson, C.; Sand, A. E.; Soisson, F.; Terentyev, D.; Ventelon, L.; Willaime, F.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1604. The impact of materials R&D on the operation of a water-cooled DEMO divertor
    Rieth, M.; Antusch, S.; Reiser, J.; Hoffmann, J.; Klimenkov, M.; Brezinsek, S.; Biel, W.; Coenen, J.; Linke, J.; Linsmeier, C.; Litnovsky, A.; Loewenhoff, T.; Pintsuk, G.; Unterberg, B.; Wirtz, M.; Greuner, H.; Kallenbach, A.; Neu, R.; Riesch, J.; You, J. H.; Barrett, T.; Domptail, F.; Dudarev, S.; Fursdon, M.; Gilbert, M.; Garrison, L. M.; Snead, L. L.; Katoh, Y.; Armstrong, D.; Roberts, S.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1605. Nanostructure evolution in ODS steels under ion irradiation
    Rogozhkin, S.; Bogachev, A.; Korchuganova, O.; Nikitin, A.; Orlov, N.; Aleev, A.; Zaluzhnyi, A.; Kulevoy, T.; Chalykh, B.; Lindau, R.; Möslang, A.; Vladimirov, P.; Klimenkov, M.; Heilmaier, M.; Wagner, J.; Seils, S.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1606. Experimental investigation of high He/dpa microstructural effects in neutron irradiated B alloyed EUROFER by means of small angle neutron scattering (SANS) and electron microscopy
    Coppola, R.; Klimenkov, M.; Lindau, R.; Möslang, A.; Valli, M.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1607. Comparative small angle neutron scattering (SANS) study of EUROFER steel neutron irradiated in mixed (HFR) and fast spectrum (BOR60) reactors
    Coppola, R.; Gaganidze, E.; Klimenkov, M.; Dethloff, C.; Lindau, R.; Valli, M.; Aktaa, J.; Möslang, A.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, Germany, October 11-16, 2015
  1608. Transmission electron microscopy at samples of thermo-mechanically treated RAFM steels
    Jäntsch, U.; Klimenkov, M.; Hoffmann, J.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1609. A fabrication study on austenitic ODS steel
    Gräning, T.; Hoffmann, J.; Antusch, S.; Klimenkov, M.; Rieth, M.; Möslang, A.; Müller, S.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1610. Hydrogen driven microstructural changes of ODS-EUROFER under tensile loading
    Emelyanova, O. V.; Ganchenkova, M. G.; Malitskiy, E.; Yagodzinskyy, Y. N.; Klimenkov, M.; Borodin, V. A.; Vladimirov, P. V.; Lindau, R.; Dzhumaev, P. S.; Möslang, A.; Hanninen, H.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1611. Status and upgrade of the ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Rapson, C.; Reich, M.; Schubert, M.; Schütz, H.; Treutterer, W.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Gantenbein, G.; Jelonnek, J.; Kasparek, W.; Lechte, C.; Plaum, B.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Pepov, I. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2015. (ASDEX Upgrade Team, Ed.), Workshop on RF Heating Technology of Fusion Plasmas 2015, Tokyo, J, August 31 - September 2, 2015 Book of Abstracts
  1612. Thermochemistry of selected compositions in the LiNiO₂-LiMnO₂ (NMC) system as positive electrode materials for Li-ion batteries
    Masoumi, M.; Cupid, D. M.; Reichmann, T. L.; Gotcu-Freis, P.; Seifert, H. J.
    2015. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2015), Warszawa, PL, September 20-24, 2015
  1613. Tungsten (W) foil laminates for structural divertor applications
    Reiser, J.; Bonk, S.; Bonnekoh, C.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Hoffmann, A.; Wurster, S.; Nemeth, A.; Franke, P.; Weingärtner, T.; Rieth, M.; Möslang, A.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12- 16, 2015
  1614. Dynamische Lastverteilung auf einem HPC Framework mit nachrichtenbasierter Kommunikation
    Heisler, C.; Hötzer, J.; Maier, M.; Reiter, A.; Selzer, M.; Nestler, B.
    2015. Forschung aktuell, 2015, 16–18
  1615. Quantitative phase-field modeling of phase transitions across the length scales through high performance computing
    Selzer, M.
    2015. 1st International Workshop on Software Solutions for ICME, Aachen, June 24-27, 2014
  1616. Microstructural and electrochemical comparison of as deposited and heat treated Li-Ni-Mn-Co-O thin film cathodes for Lithium-ion batteries
    Strafela, M.; Fischer, J.; Seemann, K.; Leiste, H.; Seifert, H. J.; Ulrich, S.
    2015. Lithium Battery Discussions (LiBD2015), Arcachon, F, June 21-26, 2015
  1617. Influence of substrate material and annealing process on phase and crack formation of LIB electrodes in the system Li-Mn-O
    Strafela, M.; Fischer, J.; Arikan, N.; Mozaffari-Jovein, H.; Seifert, H. J.; Ulrich, S.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1618. Constitution and microstructure correlations of magnetron sputtered Li-Ni-Mn-Co-O thin film cathodes for lithium-ion batteries
    Strafela, M.; Fischer, J.; Leiste, H.; Rinke, M.; Bergfeldt, T.; Ulrich, S.; Seifert, H. J.
    2015. 3. Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 26. Juni 2014
  1619. Modellierung und Simulation der Starrkörperbewegung in Rückschlagventilen
    Jainta, M.; Reiter, A.; August, A.; Moik, F.; Nestler, B.
    2015. Forschung aktuell, 2015, 13–15
  1620. Sonnenbäder am Nordpol: Das Eisbär-Prinzip für Gebäude
    August, A.; Nestler, B.; Kneer, A.
    2015. Horizonte : Forschung an Fachhochschulen in Baden-Württemberg, (45), 68
  1621. Testing candidate interlayers for an enhanced water-cooled divertor target
    Hancock, D.; Barrett, T.; Foster, J.; Fursdon, M.; Keech, G.; McIntosh, S.; Timmis, W.; Rieth, M.; Reiser, J.
    2015. Fusion engineering and design, 98-99, 1323–1327. doi:10.1016/j.fusengdes.2014.12.026
  1622. Enhancing the DEMO divertor target by interlayer engineering
    Barrett, T. R.; McIntosh, S. C.; Fursdon, M.; Hancock, D.; Timmis, W.; Coleman, M.; Rieth, M.; Reiser, J.
    2015. Fusion engineering and design, 98-99, 1216–1220. doi:10.1016/j.fusengdes.2015.03.031
  1623. Ductility in ultrafine-grained (UFG) tungsten foil: Correlation between microstructure and mechanical properties
    Bonk, S.; Reiser, J.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Rieth, M.
    2015. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2015), Warszawa, PL, September 20-24, 2015
  1624. Development of sandwich flow channel inserts for an EU DEMO dual coolant blanket concept
    Norajitra, P.; Basuki, W. W.; Gonzalez, M.; Rapisarda, D.; Rohde, M.; Spatafora, L.
    2015. Fusion science and technology, 68 (3), 501–506. doi:10.13182/FST14-932
  1625. ITER ECRH upper launcher: Test plan for qualification of the diamond torus window prototype III
    Schreck, S.; Aiello, G.; Meier, A.; Scherer, T.; Gagliardi, M.; Saibene, G.
    2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
  1626. ITER ECRH upper launcher torus diamond window : Prototyping, testing and qualification
    Schreck, S.; Aiello, G.; Meier, A.; Strauss, D.; Ikeda, R.; Oda, Y.; Sakamoto, K.; Takahashi, K.; Scherer, T.
    2015. Fusion engineering and design, 96-97, 593–596. doi:10.1016/j.fusengdes.2015.02.002
  1627. From W7-X towards ITER and beyond: Status and progress in EU fusion gyrotron developments
    Jelonnek, J.; Aiello, G.; Avramidis, K.; Franck, J.; Gantenbein, G.; Grossetti, G.; Hesch, K.; Illy, S.; Jin, J.; Kalaria, P.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Samartsev, A.; Scherer, T.; Strauss, D.; Wu, C.; Thumm, M.; Alberti, S.; Braunmueller, F.; Genoud, J.; Hogge, J. P.; Schlatter, C.; Tran, T. M.; Tran, M. Q.; Chelis, I.; Vomvoridis, J. L.; Ioannidis, Z. C.; Latsas, G.; Tigelis, I. G.; Bruschi, A.; Lontano, M.; Hermann, V.; Legrand, F.; Rozier, Y.; ALbajar, F.; Bonicelli, T.; Cismondi, F.
    2015. Proceedings of the 16th International Vacuum Electronics Conference (IVEC), Beijing, China, April 27-29, 2015, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IVEC.2015.7223795
  1628. Analytical study of Z-phase precipitation in 9%Cr ferritic a
    Klimenkov, M.; Jäntsch, U.; Hoffmann, J.; Rieth, M.
    2015. Microscopy Conference 2015, Göttingen, September 6-11, 2015 Book of Abstracts
  1629. Soft X-ray emission spectroscopy used for the characterization of a-C and CNₓ thin films
    Nepijko, S. A.; Chernenkaya, A.; Medjanik, K.; Chernov, S. V.; Klimenkov, M.; Vlasenko, O. V.; Petrovskaya, S. S.; Odnodvorets, L. V.; Zaulichnyy, Y. V.; Schönhense, G.
    2015. Thin solid films, 577, 109–113. doi:10.1016/j.tsf.2015.01.065
  1630. Characterization and magnetic properties of nanoparticles based on FePt solid solution with an oxide shell
    Shpetnyi, I.; Kovalenko, A. S.; Klimenkov, M.; Protsenko, I. Y.; Chernov, S. V.; Nepijko, S. A.; Elmers, H. J.; Schönhense, G.
    2015. Journal of magnetism and magnetic materials, 373, 231–235. doi:10.1016/j.jmmm.2014.01.071
  1631. Comparative study of helium effects on EU-ODS EUROFER and EUROFER97 by nanoindentation and TEM
    Roldan, M.; Fernandez, P.; Rams, J.; Jimenez-Rey, D.; Materna-Morris, E.; Klimenkov, M.
    2015. Journal of nuclear materials, 460, 226–234. doi:10.1016/j.jnucmat.2015.02.025
  1632. Enthalpy of formation of Li₁₋ₓMn₂₋ₓO₄ (0<x<0.1) spinel phases
    Cupid, D. M.; Reif, A.; Seifert, H. J.
    2015. Thermochimica acta, 599, 35–41. doi:10.1016/j.tca.2014.11.003
  1633. Wolfram-Laminatrohre als Strukturkomponente für innovative Hochtemperaturenergiekonversionssysteme
    Reiser, J.; Bonk, S.; Bonnekoh, C.; Hoffmann, J.; Jäntsch, U.; Klimenkov, M.; Rieth, M.; Hoffmann, A.; Wurster, S.; Nemeth, A.
    2015. Werkstoffwoche, Dresden, 14.-17. September 2015
  1634. The European contribution to the EX system: status and main challenges
    Albajar, F.; Bonicelli, T.; Carannante, G.; Castillo, A.; Cauvard, F.; Cavinato, M.; Cismondi, F.; Gagliardi, M.; Saibene, G.; Sartori, F.; Darbos, C.; Gandini, F.; Gassmann, T.; Henderson, M.; Takahashi, K.; Alberti, S.; Avramidis, K.; Braunmüller, F.; Bin, W.; Bruschi, A.; Chelis, J.; Dammertz, G.; Fasel, D.; Gantenbein, G.; Hogge, J. P.; Illy, S.; Ioannidis, Z.; Jelonnek, J.; Jin, J.; Latsas, G.; Pagonakis, I.; Rzesnicki, T.; Siravo, U.; Thumm, M.; Tigelis, J.; Tran, M. Q.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Hermann, V.; Rozier, Y.; Bader, M.; Arnold, F.
    2015. Workshop on RF Heating Technology of Fusion Plasmas 2015, Tokyo, J, August 31 - September 2, 2015 Book of Abstracts
  1635. Developments for future EU DEMO gyrotrons - 2015 updata on developments within EUROfusion
    Jelonnek, J.; Aiello, G.; Alberti, S.; Avramidis, K.; Braunmüller, F.; Franck, J.; Franke, T.; Gantenbein, G.; Genoud, J.; Grossetti, G.; Granucci, G.; Illy, S.; Ioannidis, Z.; Kalaria, P.; Pagonakis, I.; Rzesnicki, T.; Ruess, S.; Scherer, T.; Strauss, D.; Tigelis, I.; Thumm, M.; Tran, M. Q.; Tran, T. M.; Tsilis, E.; Wu, C.; Zhang, J.
    2015. Workshop on RF Heating Technology of Fusion Plasmas 2015, Tokyo, J, August 31 - September 2, 2015 Book of Abstracts
  1636. Diamond window diagnostics - concepts update
    Mazzocchi, F.; Meier, A.; Bodnar, G.; Scherer, T. A.
    2015. Workshop on RF Heating Technology of Fusion Plasmas 2015, Tokyo, J, August 31 - September 2, 2015
  1637. Ray-tracing of a double-disc window unit for fusion applications
    Vaccaro, A.; Scherer, T. A.
    2015. Workshop on RF Heating Technology of Fusion Plasmas 2015, Tokyo, J, August 31 - September 2, 2015
  1638. Integration of electron cyclotron launchers in the EU DEMO
    Grossetti, G.; Aiello, G.; Jelonnek, J.; Poli, E.; Scherer, T.; Strauß, D.; Tardini, G.; Vaccaro, A.; Zohm, H.
    2015. Workshop on RF Heating Technology of Fusion Plasmas 2015, Tokyo, J, August 31 - September 2, 2015 Book of Abstracts
  1639. Optical measurements of heat treated silica samples
    Mazzocchi, F.; Scherer, T.; Saavedra, R.; Martinez, P. M.
    2015. 40th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2025), Hong Kong, Hong Kong, August 23–28, 2015
  1640. Optical measurements of heat treated silica samples
    Mazzocchi, F.; Scherer, T.; Saavedra, R.; Martinez, P. M.
    2015. Proceedings of the 40th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2015), Hong Kong, China, August 23-28, 2015, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2015.7327424
  1641. Neutron imaging investigations of the secondary hydriding of nuclear fuel cladding alloys during loss of coolant accidents
    Grosse, M.; Roessger, C.; Stuckert, J.; Steinbrueck, M.; Kaestner, A.; Kardjilov, N.; Schillinger, B.
    2015. Physics procedia, 69, 436–444. doi:10.1016/j.phpro.2015.07.061
  1642. Mechanical and microstructural investigations of tungsten and doped tungsten materials produced via powder injection molding
    Antusch, S.; Armstrong, D. E. J.; Britton, T. B.; Commin, L.; Gibson, J. S. K. L.; Greuner, H.; Hoffmann, J.; Knabl, W.; Pintsuk, G.; Rieth, M.; Roberts, S. G.; Weingaertner, T.
    2015. Nuclear Materials and Energy, 3 (3-4), 22–31. doi:10.1016/j.nme.2015.04.002
  1643. Phase-field elasticity model based on mechanical jump conditions
    Schneider, D.; Tschukin, O.; Choudhury, A.; Selzer, M.; Böhlke, T.; Nestler, B.
    2015. Computational mechanics, 55 (5), 887–901. doi:10.1007/s00466-015-1141-6
  1644. Electrochemical-calorimetric studies on different lithium-ion cells
    Lei, B.; Ziebert, C.; Melcher, A.; Rohde, M.; Seifert, H. J.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1645. Parameter Identification For Equivalent Circuit Models Of Li-Ion Batteries Using The Current Interruption Technique
    Melcher, A.; Ziebert, C.; Lei, B.; Rohde, M.; Seifert, H. J.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1646. Table-driven Li-Ion Battery Cell Model for a BMS Development Platform
    Melcher, A.; Ziebert, C.; Gulbins, M.; Markwirth, T.; Uhle, T.; Haase, J.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1647. Influence of driving cycles on Li-ion cells studied by electrochemicalcalorimetric measurements
    Ziebert, C.; Melcher, A.; Lei, B.; Rohde, M.; Seifert, H. J.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1648. Lithium ion transport kinetic in ultrafast laser structured LiFePO4 composite electrodes
    Mangang, M.; Gotcu-Freis, P.; Seifert, H. J.; Pfleging, W.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1649. Influence of substrate material and annealing process on phase and crack formation of LIB electrodes in the system Li-Mn-O
    Strafela, M.; Fischer, J.; Arikan, N.; Mozaffari-Jovein, H.; Seifert, H. J.; Ulrich, S.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1650. Materials research for energy supply at Karlsruhe Institute of Technology
    Krüssmann, R.; Gräning, T.; Janda, D.; Ruck, S.; Schneider, D.; Strassberger, L.; Vladimirov, P.; Yurechko-Hussy, M.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1651. The Reprocessing and Activation of Advanced Tritium Breeder Pebbles
    Leys, O.; Mukai, K.; Knitter, R.; Pereslavtsev, P.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1652. Influences on the barite precipitation from geothermal brines
    Canic, T.; Baur, S.; Bergfeldt, T.; Kuhn, D.
    2015. World Geothermal Congress (WGC 2015), Melbourne, AUS, April 19-24, 2015
  1653. Influences on the barite precipitation from geothermal brines
    Canic, T.; Baur, S.; Bergfeldt, T.; Kuhn, D.
    2015. World Geothermal Congress (WGC 2015), Melbourne, AUS, April 19-24, 2015, Paper 27009, International Geothermal Association (IGA)
  1654. Table-driven Li-Ion Battery Cell Model for a BMS Development Platform
    Melcher, A.; Ziebert, C.; Gulbins, M.; Markwirth, T.; Uhle, T.; Haase, J.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1655. Modeling Thermal Runaway Of Li-Ion Batteries - A Mathematical Ansatz
    Melcher, A.; Ziebert, C.; Lei, B.; Rohde, M.; Seifert, H. J.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1656. Microwave processing of hydroxyapatite scaffolds
    Hassan, M. N.; Link, G.; Mahmoud, M. M.; El-Fattah, A. A.; Kandil, S.
    2015. Materials Science and Technology (MS & T 2015), Columbus, Ohio, October 4-8, 2015
  1657. Hydrides and fracture of pure zirconium and zircaloy-4 hydrogenated at temperatures typical for loss-of-coolant accident conditions
    Pshenichnikov, A.; Stuckert, J.; Walter, M.; Litvinov, D.
    2015. 23rd International Conference on Nuclear Engineering (ICONE23), Chiba, J, May 17-21, 2015
  1658. Circuits and applications of increasing of the HiPIMS deposition rate for an industrial scale
    Mark, G.; Mark, M.; Ulrich, S.; Stüber, M.; Ye, J.; Schweiger, S.; Leiste, H.
    2015. International Conference on Metallurgical Coatings and Thin Films (ICMCTF’15), San Diego, Calif., April 20-24, 2015
  1659. Nanoskalige Hochleistungsschutzschichten zum Surface Engineering von Zerspan- und Umformwerkzeugen
    Ulrich, S.; Leiste, H.; Stüber, M.
    2015. Symposium zur Werkstoffwoche Surface Engineering, Dresden, 14.-17.September 2015
  1660. Secondary hydrogenation of zircaloy-4 cladding tubes during LOCA bundle tests performed at KIT
    Roessger, C.; Stuckert, J.; Grosse, M.; Steinbrück, M.
    2015. International Conference on Hydrogen Storage Embrittlement and Applications (Hy-SEA 2014), Rio de Janeiro, BR, October 26-30, 2014
  1661. Hydrides and fracture of pure zirconium and zircaloy-4 hydrogenated at temperatures typical for loss-of-coolant accident conditions
    Pshenichnikov, A.; Stuckert, J.; Walter, M.; Litvinov, D.
    2015. 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy, ICONE 2015; Makuhari MesseChiba, Japan, 17 - 21 May 2015. Proceedings, Paper ICONE23–1724, The American Society of Mechanical Engineers (ASME)
  1662. Laser moulding, a new low-cost fabrication process for micro- and nanostructured components
    Wissmann, M.; Besser, H.; Beiser, M.; Pfleging, W.
    2015. Microsystem technologies, 21, 1543–1549. doi:10.1007/s00542-014-2227-3
  1663. Modelling of hydrogen interactions with beryllium surfaces in fusion reactor
    Vladimirov, P.; Bachurin, D.; Stihl, C.
    2015. International workshop on Models and Data for Plasma-Material Interaction in Fusion Devices (MoD-PMI 2015), Marseille, F, May 25-27, 2015
  1664. Influence of subsurface microstructure on the running-in of an AlSi alloy
    Linsler, D.; Schlarb, T.; Weingärtner, T.; Scherge, M.
    2015. Wear, 332-333, 926–931. doi:10.1016/j.wear.2015.02.044
  1665. Re-design of double-disc WU with respect to stray radiation/cooling issues. Ray-tracing approach
    Scherer, T.; Vaccaro, A.
    2015. 27th Joint Russian-German Workshop on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 29 - July 4, 2015
  1666. Recent status of the ITER-torus window
    Scherer, T.; Aiello, G.; Schreck, S.; Meier, A.; Strauss, D.
    2015. 27th Joint Russian-German Workshop on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 29 - July 4, 2015
  1667. Radiation level analysis for the port cell of the ITER electron cyclotron-heating upper launcher
    Weinhorst, B.; Fischer, U.; Lu, L.; Strauss, D.; Spaeh, P.; Scherer, T.; Leichtle, D.
    2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, 14th - 18th September 2015
  1668. Electrolyte mixtures based on ethylene carbonate and dimethyl sulfone for Li-ion batteries with improved safety characteristics
    Hofmann, A.; Migeot, M.; Thißen, E.; Schulz, M.; Heinzmann, R.; Indris, S.; Bergfeldt, T.; Lei, B.; Ziebert, C.; Hanemann, T.
    2015. ChemSusChem, 8, 1892–1900. doi:10.1002/cssc.201500263
  1669. Tungsten (W) laminate pipes for innovative high temperature energy conversion systems
    Reiser, J.; Rieth, M.; Möslang, A.; Greuner, H.; Armstrong, D. E. J.; Denk, T.; Gräning, T.; Hering, W.; Hoffmann, J.; Leiste, H.; Mrotzek, T.; Pippan, R.; Schulmeyer, W.; Weingärtner, T.; Zabernig, A.
    2015. Advanced engineering materials, 17 (4), 491–501. doi:10.1002/adem.201400204
  1670. Microstructure and mechanical properties of Zircaloy-4 cladding hydrogenated at temperatures typical for loss-of-coolant accident (LOCA) conditions
    Pshenichnikov, A.; Stuckert, J.; Walter, M.
    2015. Nuclear engineering and design, 283, 33–39. doi:10.1016/j.nucengdes.2014.06.022
  1671. Post-test calculation of the QUENCH-17 bundle experiment with debris formation and bottom water reflood using thermal hydraulic and severe fuel damage code SOCRAT/V3
    Vasiliev, A.; Stuckert, J.
    2015. Nuclear engineering and design, 283, 21–32. doi:10.1016/j.nucengdes.2014.03.011
  1672. A comparison of core degradation phenomena in the CORA, QUENCH, Phebus SFD and Phebus FP experiments
    Haste, T.; Steinbrück, M.; Barrachin, M.; Luze, O. de; Grosse, M.; Stuckert, J.
    2015. Nuclear engineering and design, 283, 8–20. doi:10.1016/j.nucengdes.2014.06.035
  1673. The ITER EC H&CD upper launcher: Methodology in the FEM analysis of the diamond window unit subject to seismic and baking loads
    Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Speh, P.; Strauss, D.; Vaccaro, A.; Gagliardi, M.; Saibene, G.; Goodman, T. P.; Krause, A.; Sanchez, F.
    2015. 26th Symposium on Fusion Engineering (SOFE 2015), Austin, Tex., May 31 - June 4, 2015
  1674. Cooling design and analysis of the ITER EC upper launcher
    Spaeh, P.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.; Weinhorst, B.; KRause, A.; Nousiainen, R.
    2015. 26th Symposium on Fusion Engineering (SOFE 2015), Austin, Tex., May 31 - June 4, 2015
  1675. Material constraints due to neutron irradiation and degradation
    Möslang, A.
    2015. 15th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC 2015), Aix-en-Provence, F, May 18-22, 2015
  1676. Grwth of αCr₂O₃ thin films on α-Al₂O₃ substrate at low temperature by r.f.magnetron sputtering
    Gao, Y.; Leiste, H.; Stueber, M.; Ulrich, S.
    2015. 5th European Conference on Crystal Growth (ECCG 5), Bologna, I, September 9-11, 2015
  1677. Mechanical compression tests of beryllium pebbles after neutron irradiation up to 3000 appm helium production
    Chakin, V.; Rolli, R.; Moeslang, A.; Zmitko, M.
    2015. Fusion engineering and design, 93, 36–42. doi:10.1016/j.fusengdes.2015.02.019
  1678. Boron effect on the microstructure of 9% Cr ferritic-martensitic steels
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2015. Journal of nuclear materials, 462, 280–288. doi:10.1016/j.jnucmat.2015.03.002
  1679. Microstructure of out-of-pile annealed neutron irradiated beryllium studied by X-ray tomography
    Vladimirov, P.; Ferrero, C.; Chakin, V.; Kurinskiy, P.; Moeslang, A.; Pieritz, R.; Weitkamp, T.; Brun, E.
    2015. Acta materialia, 88, 293–301. doi:10.1016/j.actamat.2015.01.045
  1680. Nanostructure evolution in ODS Eurofer steel under irradiation up to 32 dpa
    Rogozhkin, S. V.; Orlov, N. N.; Aleev, A. A.; Zaluzhnyi, A. G.; Kozodaev, M. A.; Kuibeda, R. P.; Kulevoy, T. V.; Nikitin, A. A.; Chalykh, B. B.; Lindau, R.; Möslang, A.; Vladimirov, P.
    2015. The physics of metals and metallography, 116, 72–78. doi:10.1134/S0031918X15010093
  1681. Nanoscale characterization of 13.5% Cr oxide dispersion strengthened steels with various titanium concentrations
    Rogozhkin, S. V.; Orlov, N. N.; Nikitin, A. A.; Aleev, A. A.; Zaluzhnyi, A. G.; Kozodaev, M. A.; Lindau, R.; Möslang, A.; Vladimirov, P.
    2015. Inorganic materials / Applied research, 6, 151–155. doi:10.1134/S2075113315020136
  1682. Crystallization of lithium disilicate glass using high frequency microwave processing
    Mahmoud, M. M.; Thumm, M.
    2015. Journal of the European Ceramic Society, 35 (10), 2915–2922. doi:10.1016/j.jeurceramsoc.2015.04.006
  1683. Tungsten laminates made of ultrafine-grained (UFG) tungsten foil. Ageing of tungsten-titanium (W-Ti) laminates
    Reiser, J.; Franke, P.; Weingärtner, T.; Hoffmann, J.; Hoffmann, A.; Rieth, M.
    2015. International Journal of Refractory Metals and Hard Materials, 51, 264–274. doi:10.1016/j.ijrmhm.2015.04.032
  1684. Integration of new experiments into the reflood map
    Hering, W.; Homann, C.; Stuckert, J.
    2015. International Congress on Advances in Nuclear Power Plants (ICAPP 2015), Nice, F, May 3-6, 2015
  1685. Integration of new experiments into the reflood map
    Hering, W.; Homann, C.; Stuckert, J.
    2015. International Congress on Advances in Nuclear Power Plants (ICAPP 2015), Nice, F, May 3-6, 2015, 1420–1428, Omnipress
  1686. Diamond window. High power RF transmission and diagnostics
    Mazzocchi, F.; Scherer, T.
    2015. 9th International Conference on New Diamonds and Nano Carbons, Shizuoka, J, May 24-28, 2015
  1687. Dielectric properties of single crystalline diamond wafers with large area at microwave wavelengths
    Yamada, H.; Meier, A.; Mazzocchi, F.; Schreck, S.; Scherer, T.
    2015. Diamond and related materials, 58, 1–4. doi:10.1016/j.diamond.2015.05.004
  1688. Diamond windows diagnostics for nuclear fusion applications. Early concepts
    Mazzocchi, F.; Aiello, G.; Meier, A.; Schreck, S.; Spaeh, P.; Strauss, D.; Scherer, T.
    2015. The European physical journal / Web of Conferences, 87, 04007/1–4. doi:10.1051/epjconf/20158704007
  1689. Recent progress in the development of helium-cooled divertor for DEMO
    Norajitra, P.; Basuki, W. W.; Giniyatulin, R.; Hernandez, C.; Kuznetsov, V.; Mazoul, I. V.; Richou, M.; Spatafora, L.
    2015. Fusion science and technology, 67 (4), 732–744. doi:10.13182/FST14-832
  1690. Influence of cold work on solution-based corrosion attack on 1.4970 (15-15Ti) austenitic steel in static liquid lead-bismuth eutectic at 550⁰C and <= 10⁻⁸ mass % dissolved oxygen
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2015. 23rd International Conference on Nuclear Engineering (ICONE23), Chiba, J, May 17-21, 2015
  1691. Characterization of silicon-containing ferritic/martensitic steel after exposure to oxygen -containing flowing lead-bismuth eutectic at 450 and 550⁰C
    Schroer, C.; Koch, V.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2015. 23rd International Conference on Nuclear Engineering (ICONE23), Chiba, J, May 17-21, 2015
  1692. Manufacturing and characterization of PIM-W materials as PFMs
    Pintsuk, G.; Antusch, S.; Rieth, M.; Wirtz, M.
    2015. 15th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC 2015), Aix-en-Provence, F, May 18-22, 2015
  1693. Materials for DEMO and reactor applications. Boundary condition and new concepts
    Coenen, J. W.; Antusch, S.; Aumann, M.; Biel, W.; Du, J.; Engels, J.; Heuer, S.; Houben, A.; Hoeschen, T.; Jasper, B.; Koch, F.; Litnovsky, A.; Mao, Y.; Neu, R.; Pintsuk, G.; Riesch, J.; Rasinski, M.; Reiser, J.; Rieth, M.; Unterberg, B.; Weber, T.; Wegener, T.; You, J. H.; Linsmeier, C.
    2015. 15th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC 2015), Aix-en-Provence, F, May 18-22, 2015
  1694. Influence of cold work on solution-based corrosion attack on 1.4970 (15-15Ti) austenitic steel in static liquid lead-bismuth eutectic at 550⁰C and <= 10⁻⁸ mass % dissolved oxygen
    Tsisar, V.; Schroer, C.; Wedemeyer, O.; Skrypnik, A.; Konys, J.
    2015. 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy, ICONE 2015, Makuhari MesseChiba, Japan; 17 May 2015 - 21 May 2015 Proceedings, ICONE23–1045, The American Society of Mechanical Engineers (ASME)
  1695. Quantitative analysis of hydrogen uptake, diffusion and distribution in nuclear fuel rod claddings made of zirconium alloys
    Grosse, M.
    2015. Neutron news, 26 (2), 31–33. doi:10.1080/10448632.2015.1028277
  1696. The role of the native oxide shell on the microwave sintering of copper etal powder compacts
    Mahmoud, M. M.; Link, G.; Thumm, M.
    2015. Journal of Alloys and Compounds, 627, 231–237. doi:10.1016/j.jallcom.2014.11.180
  1697. Prediction of heat conduction in open-cell foams via the diffuse interface representation of the phase-field method
    August, A.; Ettrich, J.; Rölle, M.; Schmid, S.; Berghoff, M.; Selzer, M.; Nestler, B.
    2015. International Journal of Heat and Mass Transfer, 84, 800–808. doi:10.1016/j.ijheatmasstransfer.2015.01.052
  1698. Microstructure of ferritic ODS alloys after different production routes
    Hoffmann, J.
    2015. 2nd ODISSEUS Workshop on ODS Alloys for Nuclear Applications, Oxford, GB, March 23-24
  1699. Hydrogen uptake of Zry-4 during reaction in N₂/H₂O atmosphere in the temperature range of 600 - 1100⁰C
    Grosse, M.; Steinbrück, M.; Ott, L.; Kaestner, A.
    2015. International Congress on Advances in Nuclear Power Plants (ICAPP 2015), Nice, F, May 3-6, 2015
  1700. Hydrogen uptake of Zry-4 during reaction in N₂/H₂O atmosphere in the temperature range of 600 - 1100⁰C
    Grosse, M.; Steinbrück, M.; Ott, L.; Kaestner, A.
    2015. International Congress on Advances in Nuclear Power Plants (ICAPP 2015), Nice, F, May 3-6, 2015 Proceedings, Paper 15045, Omnipress
  1701. Mould insert fabrication of a single-mode fibre connector alignment structure optimized by justified partial metallization
    Wissmann, M.; Barie, N.; Guttmann, M.; Schneider, M.; Kolew, A.; Besser, H.; Pfleging, W.; Hofmann, A.; Erps, J. van; Beri, S.; Watte, J.
    2015. Journal of micromechanics and microengineering, 25, 035008/1–13. doi:10.1088/0960-1317/25/3/035008
  1702. ICMCTF 2012 - preface
    Abadias, G.; Aouadi, S.; Petrov, I.; Rebholz, C.; Stüber, M.; Veprek, S.
    2015. Surface and coatings technology, 215, 1. doi:10.1016/j.surfcoat.2012.10.071
  1703. Chemical compatibility of Eurofer steel with sodium-potassium NaK-78 eutectic alloy
    Abou Sena, A.; Arbeiter, F.; Baumgartner, S.; Böttcher, T.; Heinzel, A.; Piecha, H.; Zinn, K.
    2015. 26th Symposium on Fusion Engineering (SOFE 2015), Austin, TX, USA, May 31–June 4, 2015
  1704. Funktionelle PVD-Viellagenschichten aus den Systemen Fe-Co-Hf-N, Ti-N und Ti-Al-N für die Hochfrequenz-Sensorik. PhD dissertation
    Krüger, K.
    2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000047089
  1705. Analysis of the secondary cladding hydrogenation during the QUENCH-LOCA bundle tests with zircaloy-4 claddings and its influence on the cladding embrittlement
    Große, M.; Stuckert, J.; Rössger, C.; Steinbrück, M.; Walter, M.; Kaestner, A.
    2015. 17th International Symposium on Zirconium in the Nuclear Industry; Hyderabad, Andhra Pradesh; India, 3 February 2013 - 7 February 2013 Ed.: R. J. Comstock, 1054–1073, ASTM International. doi:10.1520/STP154320120155
  1706. Aufbau eines Versuchsstandes für den ECH Upper Launcher in ITER - Schlussbericht zum Vorhaben 3FUS0010 (KIT Scientific Reports ; 7694)
    Scherer, T.; Aiello, G.; Meier, A.; Schreck, S.; Strauß, D.; Späh, P.; Vaccaro, A.
    2015. KIT Scientific Publishing. doi:10.5445/KSP/1000047037
  1707. High power ECRH and ECCD in moderately collisional ASDEX upgrade H-modes and status of EC system upgrade
    Stober, J.; Sommer, F.; Angioni, C.; Bock, A.; Fable, E.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Petzold, B.; Poli, E.; Schubert, M.; Schütz, H.; Wagner, D.; Zohm, H.; Kasparek, W.; Plaum, B.; Meier, A.; Scherer, T.; Strauß, D.; Jelonnek, J.; Thumm, M.; Litvak, A.; Denisov, G. G.; Chirkov, A. V.; Tai, E. M.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Soluyanov, E. A.; Malygin, V.
    2015. (ASDEX Upgrade Team, Ed.) The European physical journal / Web of Conferences, 87, 02004/1–6. doi:10.1051/epjconf/20158702004
  1708. Corrosion and hydrogen uptake in zirconium claddings irradiated in light water reactors
    Abolhassani, S.; Bart, G.; Bertsch, J.; Grosse, M.; Hallstadius, L.; Hermann, A.; Kuri, G.; Ledergerber, G.; Lemaignan, C.; Martin, M.; Portier, S.; Proff, C.; Restani, R.; Valance, S.; Valizadeh, S.; Wiese, H.
    2015. Zirconium in the Nuclear Industry : 17th International Symposium, Hyderabad, IND, February 3-7, 2013 West. Ed.: R. J. Comstock, 540–573, ASTM International. doi:10.1520/STP154320130007
  1709. Status of EU’s contribution to the ITER EC system
    Albajar, F.; Aiello, G.; Alberti, S.; Arnold, F.; Avramidis, K.; Bader, M.; Batista, R.; Bertizzolo, R.; Bonicelli, T.; Braunmüller, F.; Brescan, C.; Bruschi, A.; Burg, B. von; Camino, K.; Carannante, G.; Casarin, V.; Castillo, A.; Cauvard, F.; Cavalieri, C.; Cavinato, M.; Chavan, R.; Chelis, J.; Cismondi, F.; Combescure, D.; Darbos, C.; Farina, D.; Fasel, D.; Figini, L.; Gagliardi, M.; Gandini, F.; Gantenbein, G.; Gassmann, T.; Gessner, R.; Goodman, T. P.; Gracia, V.; Grossetti, G.; Heemskerk, C.; Henderson, M.; Hermann, V.; Hogge, J. P.; Illy, S.; Ioannidis, Z.; Jelonnek, J.; Jin, J.; Kasparek, W.; Koning, J.; Krause, A. S.; Landis, J. D.; Latsas, G.; Li, F.; Mazzocchi, F.; Meier, A.; Moro, A.; Nousiainen, R.; Purohit, D.; Nowak, S.; Omori, T.; Oosterhout, J. van; Pacheco, J.; Pagonakis, I.; Platania, P.; Poli, E.; Preis, A. K.; Ronden, D.; Rozier, Y.; Rzesnicki, T.; Saibene, G.; Sanchez, F.; Sartori, F.; Sauter, O.; Scherer, T.; Schlatter, C.; Schreck, S.; Serikov, A.; Siravo, U.; Sozzi, C.; Spaeh, P.; Spichiger, A.; Strauss, D.; Takahashi, K.; Thumm, M.; Tigelis, J.; Vaccaro, A.; Vomvoridis, J.; Tran, M. Q.; Weinhorst, B.
    2015. EPJ Web of Conferences, 87, 04004/1–6. doi:10.1051/epjconf/20158704004
  1710. Electron cyclotron waves for current drive and neo-classical tearing mode mitigation in a DEMO machine
    Grossetti, G.; Jelonnek, J.; Poli, E.; Strauß, D.; Vaccaro, A.; Zohm, H.
    2015. 40th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2015), Hong Kong, China, August 23-28, 2015
  1711. Microstructural changes of EUROFER-ODS steel after neutron irradiation
    Klimenkov, M.; Lindau, R.; Jäntsch, U.; Schneider, H. C.; Möslang, A.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12-16, 2015
  1712. Mikrostruktur-Eigenschafts-Korrelationen von Hartstoffschichten
    Ulrich, S.; Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.
    2015. Workshop ’Morphologie und Mikrostruktur dünner Schichten und deren Beeinflussung’, Dresden, 12. März 2015
  1713. CuCrZr alloys reinforced by Tungsten. A candidate material for structural divertor applications for DEMO
    Hoffmann, J.; Antusch, S.; Hohe, J.; Mueller, S.; Reiser, J.; Rieth, M.; Widak, V.
    2015. 12th International Conference on the Mechanical Behavior of Materials (ICM 2015), Karlsruhe, May 10-14, 2015
  1714. Microstructural characterization of neutron irradiated Tungsten
    Klimenkov, M.; Jäntsch, U.; Rieth, M.; Armstrong, D. E. J.; Gibson, J.; Roberts, S. G.
    2015. 17th International Conference on Fusion Reactor Materials, Aachen, October 12-16, 2015
  1715. Phase-field simulations of large-scale microstructures by integrated parallel algorithms
    Hötzer, J.; Jainta, M.; Vondrous, A.; Ettrich, J.; August, A.; Stubenvoll, D.; Reichardt, M.; Selzer, M.; Nestler, B.
    2015. High Performance Computing in Science and Engineering ’14 : Transactions of the High Performance Computing Center, Stuttgart (HLRS), 2014. Hrsg.: W. E. Nagel, 629–644, Springer. doi:10.1007/978-3-319-10810-0_41
  1716. From W7-X towards ITER and beyond: Status and progress in EU fusion gyrotron developments
    Jelonnek, J.; Aiello, G.; Avramidis, K.; Franck, J.; Gantenbein, G.; Grossetti, G.; Hesch, K.; Illy, S.; Jin, J.; Kalaria, P.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Samartsev, A.; Scherer, T.; Strauss, D.; Wu, C.; Thumm, M.; Alberti, S.; Braunmueller, F.; Genoud, J.; Hogge, J. P.; Schlatter, C.; Tran, T. M.; Tran, M. Q.; Chelis, I.; Vomvoridis, J. L.; Ioannidis, Z. C.; Latsas, G.; Tigelis, I. G.; Bruschi, A.; Lontano, M.; Hermann, V.; Legrand, F.; Rozier, Y.; ALbajar, F.; Bonicelli, T.; Cismondi, F.
    2015. 16th International Vacuum Electronics Conference (IVEC), Beijing, China, April 27-29, 2015
  1717. Materials research for energy supply at Karlsruhe Institute of Technology
    Krüssmann, R.; Gräning, T.; Janda, D.; Ruck, S.; Schneider, D.; Strassberger, L.; Vladimirov, P.; Yurechko-Hussy, M.
    2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
  1718. Vergleich von Zircaloy und Siliziumkarbid für nukleare Anwendungen
    Severloh, P.; Avincola, V.; Stegmaier, U.; Steinbrück, M.
    2015. 49. Metallographie-Tagung, Dresden, 16.-18. September 2015
  1719. Tailored surface-enhanced raman nanopillar arrays fabricated by laser-assisted replication for biomolecular detection using organic semiconductor lasers
    Liu, X.; Lebedkin, S.; Besser, H.; Pfleging, W.; Prinz, S.; Wissmann, M.; Schwab, P. M.; Nazarenko, I.; Guttmann, M.; Kappes, M. M.; Lemmer, U.
    2015. ACS nano, 9, 260–270. doi:10.1021/nn506589a
  1720. Sauerstoffhaltige, lithographisch strukturierte und plasmachemisch modifizierte amorphe Kohlenstoffschichten. PhD dissertation
    Danneil, F. D.
    2015. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000046613
  1721. Thermodynamic modeling and simulations for lithium-ion batteries and their materials
    Lepple, M.; Cupid, D. M.; Ziebert, C.; Rohde, M.; Melcher, A.; Seifert, H. J.
    2015. 39th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2015), Daytona Beach, Fla., January 25-30, 2015
  1722. Thermodynamic modeling and simulations for Lithium-ion batteries and their materials
    Lepple, M.; Cupid, D. M.; Ziebert, C.; Rohde, M.; Melcher, A.; Seifert, H. J.
    2015. 39th International Conference and Expo on Advanced Ceramics and Composites, ICACC’15, Daytona Beach, Florida., 25th - 30th January 2015
  1723. Parametrisierung einer Ersatzschaltung für Li-Ionenzellen durch elektrochemisch-kalorimetrische Messungen und Implementierung in der Entwurfsplattform COSIDE
    Lei, B.; Melcher, A.; Rohde, M.; Ziebert, C.; Seifert, H. J.; Gulbins, M.; Haase, J.
    2015. Batterieforum Deutschland, Berlin, 21.-23.Januar 2015
  1724. Parametisierungeiner Ersatzschaltung für Li-Ionenzellen durch elektrochemisch-kalorimetrische Messungen und Implementierung in der Entwurfsplattform COSIDE
    Lei, B.; Melcher, A.; Rohde, M.; Ziebert, C.; Seifert, H. J.; Gulbins, M.; Haase, J.
    2015. Batterieforum Deutschland, Berlin, 21.-23.Januar 2015
  1725. Microstructural study on the intermetallic compound NiAl-Cr
    Krueger, A.; Klimenkov, M.; Moeslang, A.
    2015. 12th International Conference on the Mechanical Behavior of Materials (ICM 2015), Karlsruhe, Germany, May 10–14, 2015
  1726. Estimate of the crystallization volume fraction in lithium disilicate glass-ceramics using Fourier transform infrared reflectance spectroscopy
    Mahmoud, M. M.; Folz, D. C.; Suchicital, C. T. A.; Clark, D. E.
    2015. Journal of the European Ceramic Society, 35 (2), 597–604. doi:10.1016/j.jeurceramsoc.2014.09.004
  1727. Three-dimensional silicon/carbon core-shell electrode as an anode material for lithium-ion battery
    Kim, J. S.; Kohler, R.; Pfleging, W.; Seifert, H. J.; Byun, D.; Jung, H. G.; Lee, J. K.
    2015. 227th ECS Meeting, Chicago, Ill., May 24-28, 2015
  1728. Combined crystal plasticity and phase-field method for recrystallization in a process chain of sheet metal production
    Vondrous, A.; Bienger, P.; Schreijäg, S.; Selzer, M.; Schneider, D.; Nestler, B.; Helm, D.; Mönig, R.
    2015. Computational mechanics, 55 (2), 439–452. doi:10.1007/s00466-014-1115-0
  1729. Microstructural and mechanical characterization of annealed tungsten (W) and potassium-doped tungsten foils
    Palacios, T.; Reiser, J.; Hoffmann, J.; Rieth, M.; Hoffmann, A.; Pastor, J. Y.
    2015. International journal of refractory metals & hard materials, 48, 145–149. doi:10.1016/j.ijrmhm.2014.09.005
  1730. The nature of the brittle-to-ductile transition of ultra fine grained tungsten (W) foil
    Nemeth, A. A. N.; Reiser, J.; Armstrong, D. E. J.; Rieth, M.
    2015. International journal of refractory metals & hard materials, 50, 9–15. doi:10.1016/j.ijrmhm.2014.11.005
  1731. Deviations from the parabolic kinetics during oxidation of zirconium alloys
    Steinbrück, M.; Große, M.
    2015. 17th International Symposium on Zirconium in the Nuclear Industry; Hyderabad, Andhra Pradesh; India, 3 February 2013 - 7 February 2013 Ed.: R. J. Comstock, 979–1001, ASTM International. doi:10.1520/STP154320130022
  1732. Oxidation mechanisms of lanthanum-alloyed Mo–Si–B
    Majumdar, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
    2014. Corrosion Science, 88, 360–371. doi:10.1016/j.corsci.2014.07.058
  1733. Thermodynamic calculations in the development of high-temperature Co–Re-based alloys
    Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
    2014. Journal of Alloys and Compounds, 582, 50–58. doi:10.1016/j.jallcom.2013.07.055
  1734. Glimmentladungsspektroskopie (GD-OES) zur tiefenaufgelösten Elementanalytik an PVD-Schichten
    Rinke, M.; Strafela, M.; Spitz, S.; Ulrich, S.
    2014. 18.Arbeitstagung Angewandte Oberflächenanalytik (AOFA), Kaiserslautern, 29.September - 1.Oktober 2014
  1735. Phase-field modeling of diffusion coupled crack propagation processes
    Schneider, D.; Selzer, M.; Bette, J.; Rementeria, I.; Vondrous, A.; Hoffmann, M. J.; Nestler, B.
    2014. Advanced Engineering Materials, 16 (2), 142–146. doi:10.1002/adem.201300073
  1736. Surface-Enhanced Raman Spectroscopy (SERS) using Nanopillar Arrays as Functional Substrates and an Organic Semiconductor DFB Laser as Excitation Source
    Liu, X.; Lebedkin, S.; Pfleging, W.; Besser, H.; Wissmann, M.; Nazarenko, I.; Mappes, T.; Koeber, S.; Koos, C. G.; Kappes, M.; Lemmer, U.
    2014. 2014 Conference on Lasers and Electro-Optics, CLEO: Science and Innovations : Part of CLEO 2014, San Jose, CA, June 8 - 13, 2014, paper STh4H.8, Optica Publishing Group (OSA). doi:10.1364/CLEO_SI.2014.STh4H.8
  1737. Mechanical alloying of austenitic ODS steels for high temperature applications
    Gräning, T.; Rieth, M.; Möslang, A.
    2014. Junior Euromat 2014, Lausanne, CH, July 21-25, 2014
  1738. Experimental thermophysical investigations of electrode materials
    Gotcu-Freis, P.; Cupid, D.; Rohde, M.; Seifert, H.
    2014. 4.Statustreffen des Helmholtz-Portofolios ’Elektrochemische Speicher im System - Zuverlässigkeit und Integration’, Karlsruhe, 15.-16.Oktober 2014
  1739. Thermophysical studies on Li-ion batteries
    Gotcu-Freis, P.; Pfleging, W.; Rohde, M.; Seifert, H.
    2014. Korean Battery Society Symposium, Seoul, Korea, May 30, 2014
  1740. Thermophysical investigations of cathode material for lithium-ion batteries
    Gotcu-Freis, P.; Pfleging, W.; Rohde, M.; Seifert, H. J.
    2014. 11th Conference on Solid State Chemistry (SSC 2014), Teplice, SK, July 6-11, 2014
  1741. Thermophysical properties of electrode materials for lithium-ion batteries
    Pfleging, W.; Cupid, D.; Rohde, M.; Seifert, H. J.
    2014. 20th European Conference on Thermophysical Properties (ECTP 2014), Porto, P, August 31 - September 4, 2014
  1742. Virtuelle Material- und Prozessentwicklung am Beispiel der Konstrukturausbildung in Schweißnähten
    Nestler, B.; Tschukin, O.; Jainta, M.; Daubermann, M.; Selzer, M.; Widak, V.; Hoffmann, J.; Rieth, M.
    2014. Forschungsreport für den Maschinenbau in Baden-Württemberg, 2014, 56–58
  1743. Magnetron sputtered Li-Ni-Mn-Co-O thin film cathodes for lithium-ion batteries
    Strafela, M.; Fischer, J.; Leiste, H.; Rinke, M.; Bergfeldt, T.; Ulrich, S.; Seifert, H. J.
    2014. Portfolio Treffen ’Elektrochemische Speicher im System’, Karlsruhe, 14.Oktober 2014
  1744. Zusammenhang zwischen der chemischen Zusammensetzung, Mikrostruktur und den elektrochemischen Eigenschaften von Li-Ni-Mn-Co-O Dünnschichtkathoden für Lithium-Ionen Batterien
    Strafela, M.; Fischer, J.; Leiste, H.; Rinke, M.; Bergfeldt, T.; Ulrich, S.; Seifert, H. J.
    2014. 18.Arbeitstagung Angewandte Oberflächenanalytik (AOFA), Kaiserslautern, 29.September - 1.Oktober 2014
  1745. Correlation between constitution, microstructure and electrochemical behaviour of magnetron sputtered Li-Ni-Mn-Co-O thin film cathodes for lithium-ion batteries
    Strafela, M.; Fischer, J.; Leiste, H.; Rinke, M.; Bergfeldt, T.; Ulrich, S.; Seifert, H. J.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1746. Constitution, microstructure and electrochemical behaviour of magnetron sputtered Li-Ni-Mn-Co-O thin film cathodes for lithium-ion batteries as a function of working gas and annealing pressure
    Strafela, M.; Fischer, J.; Leiste, H.; Rinke, M.; Bergfeldt, T.; Ulrich, S.; Seifert, H. J.
    2014. 14th International Conference on Plasma Surface Engineering (PSE 2014), Garmisch-Partenkirchen, September 15-19, 2014
  1747. Thin film cathodes for lithium ion batteries in the material system Li-Ni-Mn-Co-O
    Strafela, M.; Fischer, J.; Leiste, H.; Rinke, M.; Bergfeldt, T.; Ulrich, S.; Seifert, H. J.
    2014. 28th Annual MSIT Meeting, International Seminar on Heterogeneous Multicomponent Equilibria, Schloss Ringberg, Kreuth, March 9-14, 2014
  1748. Mechanische und Strömungsmechanische Topologieoptimierung mit der Phasenfeldmethode. PhD dissertation
    Selzer, M.
    2014. Dissertation, Karlsruher Institut für Technologie 2014
  1749. Digital representation of complex cellular structures for numerical simulations
    Ettrich, J.; August, A.; Roelle, M.; Nestler, B.
    2014. Cellular Materials (CellMAT 2014), Dresden, October 22-24, 2014
  1750. Open cell metal foams: Measurement and numerical modelling of fluid flow and heat transfer
    Ettrich, J.; August, A.; Nestler, B.
    2014. Cellular Materials (CellMAT 2014), Dresden, October 22-24, 2014
  1751. A numerical approach to derive analytical correlations for pressure drop and heat transfer for open cell porosities
    August, A.; Kneer, A.; Janßen-Tapken, K.; Nestler, B.
    2014. Cellular Materials (CellMAT 2014), Dresden, October 22-24, 2014
  1752. Digital representation of complex cellular structures for numerical simulations
    Ettrich, J.; August, A.; Roelle, M.; Nestler, B.
    2014. Cellular Materials (CellMAT 2014), Dresden, 22.-24. Oktober 2014, CD-ROM
  1753. Open cell metal foams: Measurement and numerical modelling of fluid flow and heat transfer
    Ettrich, J.; August, A.; Nestler, B.
    2014. Cellular Materials (CellMAT 2014), Dresden, 22.-24. Oktober 2014, CD-ROM
  1754. Metallische Schneeflocken
    Wesner, E.; August, A.; Nestler, B.
    2014. Horizonte : Forschung an Fachhochschulen in Baden-Württemberg, (43), 29–31
  1755. TEM study of impurity segregations in beryllium pebbles
    Klimenkov, M.; Chakin, V.; Möslang, A.; Rolli, R.
    2014. Journal of nuclear materials, 455, 660–664. doi:10.1016/j.jnucmat.2014.08.030
  1756. Helium influence on the microstructure and swelling of 9%Cr ferritic steel after neutron irradiation to 16.3 dpa
    Klimenkov, M.; Möslang, A.; Materna-Morris, E.
    2014. Journal of nuclear materials, 453, 54–59. doi:10.1016/j.jnucmat.2014.05.001
  1757. Thermodynamic assessment and experimental investigation of the Li-Sn system
    Li, D.; Fürtauer, S.; Flandorfer, H.; Cupid, D. M.
    2014. Calphad, 47, 181–195. doi:10.1016/j.calphad.2014.09.002
  1758. Self-organization of mesoscopic silver wires by electrochemical deposition
    Zhong, S.; Koch, T.; Walheim, S.; Roesner, H.; Nold, E.; Kobler, A.; Scherer, T.; Wang, D.; Kuebel, C.; Wang, M.; Hahn, H.; Schimmel, T.
    2014. Beilstein journal of nanotechnology, 5 (1), 1285–1290. doi:10.3762/bjnano.5.142
  1759. Effect of heavy-ion irradiation on the nanoscale state of advanced reactor ferritic-martensitic steels
    Bogachev, A.; Rogozhkin, S.; Aleev, A.; Chalykh, B.; Kulevoy, T.; Kuibeda, R.; Nikitin, A.; Orlov, N.; Zaluzhnyi, A.; Golubev, A. A.; Vladimirov, P.; Möslang, A.
    2014. Junior Euromat 2014, Lausanne, CH, July 21-25, 2014
  1760. Structure and optical properties of heterostructures based on MOCVD (AlₓGa₁₋ₓAs₁₋sub(y)Py)₁₋sub(z)Sisub(z) alloys
    Seredin, P. V.; Glotov, A. V.; Lenshin, A. S.; Arsentyey, I. N.; Vinokurov, D. A.; Prutskij, T.; Leiste, H.; Rinke, M.
    2014. Semiconductors, 48 (8), 21–29. doi:10.1134/S1063782614010217
  1761. Structural and adhesional properties of thin MoO₃ films prepared by laser coating
    Mihalev, M.; Hardalov, C.; Christov, C.; Michailov, M.; Ranguelov, B.; Leiste, H.
    2014. Journal of physics / Conference Series, 714 (1), Art.Nr.: 012022/1–17. doi:10.1088/1742-6596/514/1/012022
  1762. Structural and optical properties of heavily doped AlₓGa₁₋ₓAs₁₋sub(y)Psub(y):Mg alloys produced by metal-organic chemical vapor deposition
    Seredin, P. V.; Lenshin, A. S.; Glotov, A. V.; Arsentyey, I. N.; Vinokurov, D. A.; Tarasov, I. S.; Prutskij, T.; Leiste, H.; Rinke, M.
    2014. Semiconductors, 48 (8), 1094–1102. doi:10.1134/S1063782614080211
  1763. Correlation of microstructure and low cycle fatigue properties for 13.5Cr1.1W0.3Ti ODS steel
    He, P.; Klimenkov, M.; Möslang, A.; Lindau, R.; Seifert, H. J.
    2014. Journal of nuclear materials, 455, 167–173. doi:10.1016/j.jnucmat.2014.05.024
  1764. Hydrogen effects on tensile properties of EUROFER 97 and ODS-EUROFER steels
    Yagodzinskyy, Y.; Malitckii, E.; Ganchenkova, M.; Binyukova, S.; Emelyanova, O.; Saukkonen, T.; Hänninen, H.; Lindau, R.; Vladimirov, P.; Moeslang, A.
    2014. Journal of nuclear materials, 444, 435–440. doi:10.1016/j.jnucmat.2013.10.026
  1765. Creep-fatigue interaction in Eurofer 3 electron beam welds
    Commin, L.; Baumgärtner, S.; Dafferner, B.; Heger, S.; Rieth, M.; Möslang, A.
    2014. Fusion science and technology, 66, 131–135. doi:10.13182/FST13-744
  1766. Current status of beryllium materials for fusion blanket applications
    Vladimirov, P.; Bachurin, D.; Borodin, V.; Chakin, V.; Ganchenkova, M.; Fedorov, A.; Klimenkov, M.; Kupriyanov, I.; Moeslang, A.; Nakamichi, M.; Shibayama, T.; Van Til, S.; Zmitko, M.
    2014. Fusion science and technology, 66, 28–37. doi:10.13182/FST13-776
  1767. Long-term microstructural stability of oxide-dispersion strengthened Eurofer steel annealed at 800⁰C
    Zilnyk, K. D.; Sandim, H. R. Z.; Bolmaro, R. E.; Lindau, R.; Möslang, A.; Kostka, A.; Raabe, D.
    2014. Journal of nuclear materials, 448, 33–42. doi:10.1016/j.jnucmat.2014.01.032
  1768. Arbeitsmethoden der Materialforschung für die Fusionstechnik
    Jäntsch, U.; Rieth, M.; Klimenkov, M.; Lindau, R.
    2014. Meccanica Feminale, Furtwangen, 18.-22. Februar 2014
  1769. Development of sandwich flow channel inserts for an EU DEMO dual coolant blanket concept
    Norajitra, P.; Basuki, W. W.; Gonzalez, M.; Rapisarda, D.; Rohde, M.; Spatafora, L.
    2014. 21st Topical Meeting on the Technology of Fusion Energy (TOFE 2014), Anaheim, Calif., November 9-13, 2014
  1770. Organic semiconductor distributed feedback laser pixels for lab-on-a-chip applications fabricated by laser-assisted replication
    Liu, X.; Prinz, S.; Besser, H.; Pfleging, W.; Wissmann, M.; Vannahme, C.; Guttmann, M.; Mappes, T.; Koeber, S.; Koos, C.; Lemmer, U.
    2014. Faraday discussions, 174 (Sept), 153–164. doi:10.1039/C4FD00077C
  1771. Overview of material challenges in IFMIF test cell design
    Tian, K.; Arbeiter, F.; Heinzel, V.; Kondo, K.; Kubaschewski, M.; Mittwollen, M.; Möslang, A.
    2014. Fusion science and technology, 66, 245–251. doi:10.13182/FST13-758
  1772. Numerical study on solutal Marangoni instability in finite systems with a miscibility gap
    Wang, F.; Mukherjee, R.; Selzer, M.; Nestler, B.
    2014. Physics of fluids, 26 (12), Art.Nr. 1.4902355. doi:10.1063/1.4902355
  1773. Heat evolution and temperature increase in lithium ion cells studied by combined electrochemical-calorimetric measurements on lithium ion cells
    Rohde, M.; Ziebert, C.; Lei, B.; Seifert, H. J.
    2014. CEEES Conference ’Environmental Testing and Safety of Batteries and Fuel Cells’, Pfinztal-Berghausen, 18.09.2014, CD-ROM. doi:10.13140/2.1.1736.2729
  1774. Modeling and simulation of the thermal behavior of Li-ion Cells
    Melcher, A.; Ziebert, C.; Rohde, M.; Lei, B.; Seifert, H. J.
    2014. CEEES Conference ’Environmental Testing and Safety of Batteries and Fuel Cells’, Pfinztal-Berghausen, 18.09.2014, CD-ROM
  1775. Specific heat capacity measurements of intermetallic phases in the ternary Al-Ti-Cr system
    Kriegel, M. J.; Pavlyuchkov, D.; Fabrichnaya, O.; Rohde, M.; Rafaja, D.; Seifert, H. J.
    2014. Journal of phase equilibria and diffusion, 35, 658–665. doi:10.1007/s11669-014-0332-8
  1776. Phase evalutation during high temperature long heat treatments in the Y₂O₃-Al₂O₃-SiO₂ system
    Ahmad, S.; Ludwig, T.; Herrmann, M.; Mahmoud, M. M.; Lippmann, W.; Seifert, H. J.
    2014. Journal of the European Ceramic Society, 34, 3835–3840. doi:10.1016/j.jeurceramsoc.2014.05.025
  1777. Themophysical properties of pyrochlore and fluorite phases in the Ln₂Zr₂O₇-Y₂O₃ systems (Ln = La, Nd, Sm): 1. Pure pyrochlores and phases in the La₂Zr₂O₇-Y₂O₃ system
    Fabrichnaya, O.; Wulf, R.; Kriegel, M. J.; Savinykh, G.; Dopita, M.; Seidel, J.; Heitz, H. C.; Nashed, O.; Gross, U.; Seifert, H. J.
    2014. Journal of alloys and compounds, 586, 118–128. doi:10.1016/j.jallcom.2013.10.060
  1778. Constitution of the liquidus and solidus surfaces of the Al-Ti-Cr system
    Kriegel, M. J.; Pavlyuchkov, D.; Chmelik, D.; Fabrichnaya, O.; Korniyenko, K.; Heger, D.; Rafaja, D.; Seifert, H. J.
    2014. Journal of alloys and compounds, 584, 438–446. doi:10.1016/j.jallcom.2013.09.067
  1779. Processing and Properties of Advanced Ceramics and Composites VI:
    Singh, J. P.; Bansal, N. P.; Bhalla, A. S.; Mahmoud, M. M.; Manjooran, N. J.; Singh, G.; Lamon, J.; Choi, S. R.; Pickrell, G.; Lu, K.; Brennecka, G.; Goto, T.
    2014. Papers from the Materials Science and Technology 2013 Conf.and Exhibition (MS&T’13), Montreal, CDN, October 27-31, 2013, John Wiley and Sons
  1780. Heat evolution and temperature increase in lithium ion cells studied by combined electrochemical-calorimetric measurements on lithium ion cells
    Rohde, M.; Ziebert, C.; Lei, B.; Seifert, H. J.
    2014. CEEES Conference ’Environmental Testing and Safety of Batteries and Fuel Cells’, Pfinztal, September 18, 2014
  1781. Modeling and simulation of the thermal behavior of Li-ion Cells
    Melcher, A.; Ziebert, C.; Rohde, M.; Lei, B.; Seifert, H. J.
    2014. CEEES Conference ’Environmental Testing and Safety of Batteries and Fuel Cells’, Pfinztal, September 18, 2014
  1782. Phoshate based ceramics as solid electrolyte for high temperature Li-ion batteries
    Cui, Y.; Rohde, M.; Mahmoud, M. M.; Ziebert, C.; Seifert, H. J.
    2014. 6.Statuskolloquium der Helmholtz-Energie-Allianz ’Stationäre elektrochemische Feststoff-Speicher und -Wandler’, Bochum, 20.November 2014
  1783. Laser and microwave crytallization of phosphate based glass-ceramic for high temeprature lithium-ion battery application
    Mahmoud, M. M.; Cui, Y.; Rohde, M.; Ziebert, C.; Seifert, H. J.
    2014. Materials Science and Technology 2014 (MS&T14), Pittsburgh, Pa., October 12-16, 2014
  1784. Electrochemical-calorimetric studies of lithium-ion batteries
    Seifert, H. J.; Schuster, E.; Ziebert, C.; Rohde, M.
    2014. Materials Science and Technology 2014 (MS&T14), Pittsburgh, Pa., October 12-16, 2014
  1785. Electrochemical-calorimetric studies on lithium ion pouch cells
    Schuster, E.; Ziebert, C.; Seifert, H. J.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1786. Phosphate based glass-ceramic for high temperature lithium-ion batteries
    Cui, Y.; Mahmoud, M. M.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2014. 1st Joint Meeting of DGG - ACerS GOMD, Aachen, May 25-30, 2014
  1787. Combination of electrochemical-calorimetric studies on cylindrical lithium ion cells and thermal modelling by COMSOL multiphysics software
    Ziebert, C.; Ossipova, A.; Rohde, M.; Seifert, H. J.
    2014. Electrochemical Society Spring Meeting, Orlando, Fla., May 11-16, 2014
  1788. Phosphate based ceramics as solid electrolyte for high temperature Li ion batteries
    Cui, Y.; Rohde, M.; Ziebert, C.; Seifert, H. J.
    2014. 5.Statuskolloquium der Helmholtz-Energie-Allianz ’Stationäre elektrochemische Feststoff-Speicher und -Wandler’, Münster, 30.April 2014
  1789. Development of an all solid state thin film lithium ion battery for autarc sensors
    Ziebert, C.; Seemann, K.; Fischer, J.; Leiste, H.; Strafela, M.; Ulrich, S.; Seifert, H. J.
    2014. Helmholtz-Bosch Research Day, Stuttgart, May 5-6, 2014
  1790. Thermal and safety research on lithium and post-lithium batteries
    Ziebert, C.; Rohde, M.; Seifert, H. J.
    2014. Helmholtz-Bosch Research Day, Stuttgart, May 5-6, 2014
  1791. LATP and LAGP as solid electrolyte for high temperature lithium ion batteries
    Cui, Y.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2014. 6.Internationale Fachtagung ’Kraftwerk Batterie - Lösungen für Automobil und Energieversorgung’, Münster, 24.-26.März 2014
  1792. Electrochemical-calorimetric studies for the determination of heat data of lithium-ion cells
    Ziebert, C.; Lei, B.; Schuster, E.; Seifert, H. J.
    2014. 28th Annual MSIT Meeting, International Seminar on Heterogeneous Multicomponent Equilibria, Schloss Ringberg, Kreuth, March 9-14, 2014
  1793. Calorimetric studies of lithium ion cells and their constructing materials
    Gotcu-Freis, P.; Ossipova, A.; Rohde, M.; Schuster, E.; Ziebert, C.; Seifert, H. J.
    2014. TMS 143rd Annual Meeting & Exhibition, San Diego, Calif., February 16-20, 2014
  1794. Electrochemical-thermodynamic studies of lithium batteries
    Cupid, D.; Lepple, M.; Ossipova, A.; Reif, A.; Rohde, M.; Schuster, E.; Ziebert, C.; Seifert, H. J.
    2014. Vortr.: DLR, Stuttgart, 9.Januar 2014
  1795. Phosphate based ceramics as solid electrolyte for high temperature lithium ion batteries
    Cui, Y.; Rohde, M.; Ziebert, C.; Seifert, H. J.
    2014. Bunsen Kolloquium ’Solid-State Batteries from Fundamentals to Application’, Frankfurt, 27.-28.November 2014
  1796. Thermal runaway of Li-ion batteries. Mathematical modeling, analysis and simulation
    Melcher, A.; Ziebert, C.; Rohde, M.; Lei, B.; Seifert, H. J.
    2014. 2nd Workshop of the GAMM Activity Group on Analysis of Partial Differential Equations, Stuttgart, September 29 - October 1, 2014
  1797. Thermodynamic studies of lithium-ion cells and their materials
    Ziebert, C.; Ossipova, A.; Klingeler, R.; Rohde, M.; Seifert, H. J.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1798. Phosphate based solid electrolyte for high temperature lithium-ion bateries
    Cui, Y.; Rohde, M.; Mahmoud, M. M.; Ziebert, C.; Seifert, H. J.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1799. Electrochemical-calorimetric studies on different lithium ion cells
    Lei, B.; Ossipova, A.; Klingeler, R.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1800. Exerimental and ab initio investigations on r.f. magnetron sputtered and textured Li-Mn-O thin films with cubic spinel structure
    Fischer, J.; Music, D.; Bergfeldt, T.; Ziebert, C.; Ulrich, S.; Seifert, H. J.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1801. ECM models for Li-ion batteries. A short mathematical survey and simulations
    Melcher, A.; Ziebert, C.; Lei, B.; Rohde, M.; Seifert, H. J.
    2014. 3. Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 26. Juni 2014
  1802. Electrochemical-calorimetric studies of lithiu ion cells
    Lei, B.; Melcher, A.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2014. 3. Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 26. Juni 2014
  1803. IKEBA. Integrierte Komponentenn und integrierter Entwurf energieeffizienter Batteriesysteme
    Brugger, W.; Janz, T.; Köhler, U.; Verhaag, B.; Rohde, M.; Ziebert, C.; Seifert, H. J.; Danzer, M. A.; Schreier-Alt, T.; Dietrich, M.; Haase, J.
    2014. Batterieforum Deutschland, Berlin, 29.-31.Januar 2014
  1804. Experimental and ab initio investigations on textured Li-Mn-O spinel
    Fischer, J.; Music, D.; Bergfeldt, T.; Ziebert, C.; Ulrich, S.; Seifert, H. J.
    2014. Thin solid films, 572, 208–215. doi:10.1016/j.tsf.2014.08.018
  1805. First results of the high temperature bundle test QUENCH-L3HT with optimized ZIRLOsup(T)sup(M) claddings
    Stuckert, J.; Große, M.; Moch, J.; Rössger, C.; Steinbrück, M.; Walter, M.
    2014. Proceedings of the 20th International QUENCH Workshop, Karlsruhe, November 11-13, 2014. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1806. Update of the QUENCH programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2014. Proceedings of the 20th International QUENCH Workshop, Karlsruhe, November 11-13, 2014. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1807. Tensile behavior of RAFM alloys after neutron irradiation of up to 16.3 dpa between 250 and 450 ⁰C
    Materna-Morris, E.; Schneider, H. C.; Möslang, A.
    2014. Journal of Nuclear Materials, 455, 728–734. doi:10.1016/j.jnucmat.2014.08.054
  1808. Investigation of local structures and Li ion dynamics in Li₁̣₂Al₀̣₆Ti₁̣₄(PO₄)₃ and Li₁̣₆Al₀̣₆Ge₁̣₄(PO₄)₃ by NMR spectroscopy
    Indris, S.; Scheuermann, M.; Rohde, M.; Knapp, M.; Ehrenberg, H.
    2014. Bunsen Kolloquium ’Solid-State Batteries from Fundamentals to Application’, Frankfurt, 27.-28.November 2014
  1809. Ultrafast laser structuring of Li(NiMnCo)O₂ electrodes for lithium-ion batteries
    Smyrek, P.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2014. 1st International Energy and Environment Conference, Seoul, Korea, October 1-3, 2014
  1810. Development of 5 Ah lithium-ion batteries with laser-structured electrodes for improved electrolyte wetting and high C-rate capability
    Pröll, J.; Smyrek, P.; Seifert, H. J.; Pfleging, W.
    2014. 1st International Energy and Environment Conference, Seoul, Korea, October 1-3, 2014
  1811. Development of 3D architectures in LiFePO₄ cathode material using ultrafast laser ablation
    Mangang, M.; Seifert, H. J.; Pfleging, W.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1812. Laser ablation mechanism for modification of composite electrodes with improved electrolyte wetting behaviour
    Pröll, J.; Smyrek, P.; Weidler, P. G.; Kübel, C.; Seifert, H. J.; Pfleging, W.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1813. Einsatz von Laserprozessen zur Verbesserung der elektrochemischen Eigenschaften von LiFePO₄ Kathoden
    Mangang, M.; Seifert, H. J.; Pfleging, W.
    2014. 3. Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 26. Juni 2014
  1814. Laser transmission welding of polymers and ceramics demonstrated on PMMA and LTCC
    Kohler, R.; Torge, M.; Besser, H.; Seifert, H. J.; Pfleging, W.
    2014. International Conference on Sustainable Design and Manufacturing (SDM’2014), Cardiff, GB, April 28-30, 2014
  1815. Fs-laser microstructuring of laser-printed LiMn₂O₄ electrodes for manufacturing of 3D microbatteries
    Pröll, J.; Kim, H.; Mangang, M.; Seifert, H. J.; Pique, A.; Pfleging, W.
    2014. Laser-based Micro- and Nanoprocessing VIII, San Francisco, Calif., February 4-6, 2014
  1816. Laser generated microstructures in tape cast electrodes for rapid electrolyte wetting. New technical approach for cost efficient battery manufacturing
    Pfleging, W.; Kohler, R.; Pröll, J.
    2014. Laser-based Micro- and Nanoprocessing VIII, San Francisco, Calif., February 4-6, 2014
  1817. Ultrafast laser microstructuring of LiFePO₄ cathode material
    Mangang, M.; Pröll, J.; Tarde, C.; Seifert, H. J.; Pfleging, W.
    2014. Laser-based Micro- and Nanoprocessing VIII, San Francisco, Calif., February 4-6, 2014
  1818. Laser printed/structured thick-film electrodes for Li-ion microbatteries
    Kim, H.; Sutto, T. E.; Proell, J.; Kohler, R.; Pfleging, W.; Pique, A.
    2014. Laser-based Micro- and Nanoprocessing VIII, San Francisco, Calif., February 4-6, 2014
  1819. 3D fs-laser structuring of novel electrode materials for fuel cells
    Faubert, P.; Müller, C.; Reinecke, H.; Smyrek, P.; Proell, J.; Pfleging, W.
    2014. 9th International Workshop on Microfactories (IWMF 2014), Honolulu, Hawaii, October 5-8, 2014
  1820. Femtosecond laser modification of Li(NiCoMn)O₂ electrodes for lithium-ion batteries
    Smyrek, P.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2014. Laser Science to Photonic Applications (CLEO 2014), San Jose, Calif., June 8-13, 2014
  1821. Laser processes for development of advanced lithium-ion batteries. Increased capacity and cycle life-time
    Pfleging, W.
    2014. Laser Science to Photonic Applications (CLEO 2014), San Jose, Calif., June 8-13, 2014
  1822. Surface-enhanced Raman spectroscopy (SERS) using nanopillar arrays as functional substrates and an organic semiconductor DFB laser as excitation source
    Liu, X.; Lebedkin, S.; Pfleging, W.; Besser, H.; Wissmann, M.; Nazarenko, I.; Mappes, T.; Koeber, S.; Koos, C.; Kappes, M.; Lemmer, U.
    2014. Laser Science to Photonic Applications (CLEO 2014), San Jose, Calif., June 8-13, 2014
  1823. Laser-induced capillary microstructures in thick-film electrodes for improved electrolyte wetting behaviour and cycle liefe-time
    Pröll, J.; Kohler, R.; Seifert, H. J.; Pfleging, W.
    2014. 3rd Germany/Japan Seminar on Zero-Emission Energy, Kyoto, J, March 17-19, 2014 Book of Abstracts
  1824. Laser transmission welding of polymers and ceramics demonstrated on PMMA and LTCC
    Kohler, R.; Torge, M.; Besser, H.; Seifert, H. J.; Pfleging, W.
    2014. International Conference on Sustainable Design and Manufacturing (SDM’2014), Cardiff, Wales, UK, April 28-30, 2014 Proceedings Part 2 KES Transactions on Sustainable Design and Manufacturing, 1(2014) No.1 Special Edition - Sustainable Design and Manufacturing 2014. Ed.: R. Setchi, 950–960
  1825. Fs-laser microstructuring of laser-printed LiMn₂O₄ electrodes for manufacturing of 3D microbatteries
    Pröll, J.; Kim, H.; Mangang, M.; Seifert, H. J.; Pique, A.; Pfleging, W.
    2014. Proceedings of SPIE, 8968, Article no 896805. doi:10.1117/12.2039902
  1826. Laser generated microstructures in tape cast electrodes for rapid electrolyte wetting. New technical approach for cost efficient battery manufacturing
    Pfleging, W.; Kohler, R.; Pröll, J.
    2014. Proceedings of SPIE, 8968, Article no 89680B. doi:10.1117/12.2039635
  1827. Ultrafast laser microstructuring of LiFePO₄ cathode material
    Mangang, M.; Pröll, J.; Tarde, C.; Seifert, H. J.; Pfleging, W.
    2014. Proceedings of SPIE, 8968, Article no 89680M. doi:10.1117/12.2039604
  1828. Laser printed/structured thick-film electrodes for Li-ion microbatteries
    Kim, H.; Sutto, T. E.; Proell, J.; Kohler, R.; Pfleging, W.; Pique, A.
    2014. Proceedings of SPIE, 8968, Article no 89680L. doi:10.1117/12.2037287
  1829. 3D fs-laser structuring of novel electrode materials for fuel cells
    Faubert, P.; Müller, C.; Reinecke, H.; Smyrek, P.; Proell, J.; Pfleging, W.
    2014. 9th International Workshop on Microfactories (IWMF 2014), Honolulu, HI, October 5-8, 2014. Proceedings, 278–282
  1830. Femtosecond laser modification of Li(NiCoMn)O₂ electrodes for lithium-ion batteries
    Smyrek, P.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2014. Laser Science to Photonic Applications (CLEO 2014), San Jose, Calif., June 8-13, 2014 Proceedings Paper AW1H, Optica Publishing Group (OSA). doi:10.1364/CLEO_AT.2014.AW1H.3
  1831. Laser processes for development of advanced lithium-ion batteries. Increased capacity and cycle life-time
    Pfleging, W.
    2014. Laser Science to Photonic Applications (CLEO 2014), San Jose, CA, June 8-13, 2014 Proceedings Paper ATu3L, Optica Publishing Group (OSA). doi:10.1364/CLEO_AT.2014.ATu3L.3
  1832. ICMCTF2014 - preface
    Aouadi, S.; Broitman, E.; Stüber, M.; Veprek, S.; Franz, R.
    2014. Surface and Coatings Tchnology, 260, 1. doi:10.1016/j.surfcoat.2014.10.011
  1833. ICMCTF2014 - preface
    Aouadi, S.; Broitman, E.; Stüber, M.; Veprek, S.; Franz, R.
    2014. Thin Solid Films, 572, 1. doi:10.1016/j.tsf.2014.10.007
  1834. Special issue of Surface and Coatings Technology on 25 years of TiAlN hard coatings in research and industry
    Stüber, M.; Hultman, L.; Matthews, A.
    2014. Surface and Coatings Technology, 257(2014) (Preface). doi:10.1016/j.surfcoat.2014.08.060
  1835. Proceedings of the 11th IEA International Workshop on Beryllium Technology (BeWS-11), Barcelona, Spain, 12-13 September 2013 (KIT Scientific Reports ; 7686)
    Vladimirov, P.; Reimann, J. (Eds.)
    2014. KIT Scientific Publishing. doi:10.5445/KSP/1000044741
  1836. Modelling of cladding oxidation by air under severe accident conditions with the MAAP 4 code
    Beuzet, E.; Baumgarten, C.; Steinbrück, M.
    2014. 2014 Water Reactor Fuel Performance Meeting (WRFPM 2014), Sendai, J, September 14-17, 2014
  1837. Update of the QUENCH programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2014. 20th International QUENCH Workshop, Karlsruhe, November 11-13, 2014
  1838. Stress analysis study of silicon carbide cladding under accident conditions
    Avincola, V.; Shirvan, K.; Kazimi, M.
    2014. American Nuclear Society (ANS) Annual Conference, Reno, Nev., June 15-19, 2014
  1839. Silicon carbide as accident tolerant cladding: Oxidation and quench at very high temperature
    Avincola, V.; Steinbrück, M.; Grosse, M.; Seifert, H. J.
    2014. American Nuclear Society (ANS) Student Conference, University Park, PA, April 3-6, 2014
  1840. Comparison between hot isostatic pressed and extruded austenitic ODS steels
    Gräning, T.; Rieth, M.; Möslang, A.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1841. Development of nano-scaled austenitic ODS steel for high temperature applications
    Gräning, T.; Rieth, M.; Möslang, A.
    2014. 3rd Germany/Japan Seminar on Zero-Emission Energy, Kyoto, J, March 17-19, 2014
  1842. Zry-4 oxidation in mixed steam-nitrogen atmospheres
    Steinbrück, M.; Oliveira da Silva, F.; Seifert, H. J.
    2014. NuMat 2014: The Nuclear Materials Conference, Clearwater, Fla., October 27-30, 2014
  1843. A mechanism of nitridation process in the Zr-O-N system during air oxidation
    Park, S.; Fernandez-Moguel, L.; Steinbrück, M.; Birchley, J.; Prasser, H. M.; Seifert, H. J.
    2014. NuMat 2014: The Nuclear Materials Conference, Clearwater, Fla., October 27-30, 2014
  1844. Loss tangent measurement on synthetic single diamond (SCD) samples
    Mazzocchi, F.; Scherer, T. A.; Meier, A.; Torge, M.; Yamada, H.
    2014. 39th International Conference on Infrared, Millimeter, and THz Waves (IRMMW-THz 2014), Tucson, Ariz., September 14-19, 2014, Art.Nr. 6956191, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2014.6956191
  1845. Thermal behavior of a diamond window unit for fusion applications
    Vaccaro, A.; Aiello, G.; Meier, A.; Strauß, D.; Scherer, T.
    2014. 39th International Conference on Infrared, Millimeter, and THz Waves (IRMMW-THz 2014), Tucson, Ariz., September 14-19, 2014, Article no 6956504
  1846. Modelling of cladding oxidation by air under severe accident conditions with the MAAP 4 code
    Beuzet, E.; Baumgarten, C.; Steinbrück, M.
    2014. 2014 Water Reactor Fuel Performance Meeting (WRFPM 2014), Sendai, J, September 14-17, 2014, Paper 100018, Atomic Energy Society of Japan
  1847. High-temperature reaction of oxygen-stabilized α-Zr(O) with nitrogen
    Steinbrück, M.
    2014. Journal of nuclear materials, 447, 46–55. doi:10.1016/j.jnucmat.2013.12.024
  1848. Directionally solidified NiAl-Cr. Creep behavior and microstructural analysis
    Krüger, A.; Klimenkov, M.; Möslang, A.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1849. Directionally solidified eutectic NiAl-Cr. A new material for turbine blades?
    Krüger, A.; Klimenkov, M.; Möslang, A.
    2014. 3. Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 26. Juni 2014
  1850. Microstructural analysis of the creep bahavior of directionally solidified eutectic NiAl-Cr
    Krüger, A.; Klimenkov, M.; Möslang, A.
    2014. DPG-Frühjahrstagung, Fachverband Metall- und Materialphysik, Dresden, 30.März - 4.April 2014 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.49(2014), MM 18.32
  1851. The creep bahavior of the composite NiAl-Cr and its microstructure
    Krüger, A.; Klimenkov, M.; Möslang, A.
    2014. Junior Euromat 2014, Lausanne, CH, July 21-25, 2014
  1852. Synthesis of spent fuel pool accident assessments using severe accident codes
    Fleurot, J.; Lindholm, I.; Kononen, N.; Ederli, S.; Jaeckel, B.; Kaliatka, A.; Duspiva, J.; Steinbrück, M.; Hollands, T.
    2014. Annals of nuclear energy, 74, 58–71. doi:10.1016/j.anucene.2014.07.011
  1853. Heat capacities of LiCu₂O₂ and CuO in the temperature range 323-773 K and Cu₂O in the temperature range 973-1273 K
    Lepple, M.; Cupid, D. M.; Franke, P.; Seifert, H. J.
    2014. Journal of phase equilibria and diffusion, 35, 650–657. doi:10.1007/s11669-014-0335-5
  1854. The evolution of ferritic ODS alloys at KIT
    Hoffmann, J.
    2014. 2nd International Workshop on ODS Materials, Dresden, June 26-27, 2014
  1855. Materials, technologies and applications in nuclear fusion
    Rieth, M.
    2014. Short Course, Departamento de Ciencia de los Materiales of the Universidad Polit cnica de Madrid (UPM), Madrid, E, April 7-9, 2014
  1856. Tungsten - an overview on processing and fusion applications
    Rieth, M.
    2014. International Seminars ’Frontiers of Science Materials’, Madrid, April 7, 2014
  1857. Integrated European materials programme for DEMO applications: recent achievements and challenges
    Rieth, M.; Pintsuk, G.; Dudarev, S.; Gonzalez, S.; Groeschel, F.; Henry, J.; Porton, M.; Vila, R.
    2014. 28th Symposium on Fusion Technology (SOFT 2014), San Sebastian, E, September 29 - October 3, 2014
  1858. Characterization of dislocation loops in ferritic martensitic steels irradiated within the SPICE programme
    Hoffmann, J.; Klimenkov, M.; Vladimirov, P.
    2014. NuMat 2014: The Nuclear Materials Conference, Clearwater, Fla., October 27-30, 2014
  1859. Helium cooled pebble bed (HCPB) blankets: recent achievements in advanced neutron multiplier and breeder materials production
    Goraieb, A. A.; Möslang, A.; Knitter, R.; Müller, S.; Dorn, C.
    2014. 21st Topical Meeting on the Technology of Fusion Energy (TOFE 2014), Anaheim, Calif., November 9-13, 2014
  1860. R.F.magnetron sputtered Li-Mn-O films for Li-ion batteries: combined XPS and ToF-SIMS characterization
    Bruns, M.; Fischer, J.; Ehrenberg, H.; Seifert, H. J.; Ulrich, S.
    2014. 18.Arbeitstagung Angewandte Oberflächenanalytik (AOFA), Kaiserslautern, 29.September - 1.Oktober 2014
  1861. Effect of oxygen on the microstructure and hydrogen storage properties of V-Ti-Cr-Fe quaternary solid solutions
    Ulmer, U.; Asano, K.; Bergfeldt, T.; Chakravadhanula, V. S. K.; Dittmeyer, R.; Enoki, H.; Kübel, C.; Nakamura, Y.; Pohl, A.; Fichtner, M.
    2014. International journal of hydrogen energy, 39 (35), 20000–20008. doi:10.1016/j.ijhydene.2014.08.152
  1862. Temperature-dependent shift of the ferromagnetic cut-off frequency in Fe-Co-Hf-N/Ti-N multilayer films
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.
    2014. 59th Annual Magnetism and Magnetic Materials Conference, Honolulu, Hawaii, November 3-7, 2014
  1863. Modeling of thermal vacancies in metals within the framework of the compound energy formalism
    Franke, P.
    2014. Journal of phase equilibria and diffusion, 35, 780–787. doi:10.1007/s11669-014-0348-0
  1864. First results of the high temperature bundle test QUENCH-L3HT with optimized ZIRLOsup(T)sup(M) claddings
    Stuckert, J.; Große, M.; Moch, J.; Rössger, C.; Steinbrück, M.; Walter, M.
    2014. 20th International QUENCH Workshop, Karlsruhe, November 11-13, 2014
  1865. The SMARTLAM 3D-I concept: Design of microsystems from functional elements fabricated by generative manufacturing technologies
    Dickerhof, M.; Kimmig, D.; Adamietz, R.; Iseringhausen, T.; Segal, J.; Vladov, N.; Pfleging, W.; Torge, M.
    2014. Precision Assembly Technologies and Systems : 7th IFIP WG 5.5 International Precision Assembly Seminar (IPAS 2014), Chamonix, F, February 16-18, 2014. Ed.: S. Ratchev, 147–160, Springer-Verlag
  1866. Ultrafast laser structuring of Li(NiMnCo)O₂ electrodes
    Smyrek, P.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2014. 1st International Energy and Environment Conference, Seoul, Korea, September 30 - October 3, 2014
  1867. Microstructural anisotropy of ferritic ODS alloys after different production routes
    Hoffmann, J.; Rieth, M.; Commin, L.; Antusch, S.
    2014. 28th Symposium on Fusion Technology (SOFT 2014), San Sebastian, E, September 29 - October 3, 2014 Book of Abstracts
  1868. Nebulized spray pyrolysis of Al-doped Li₇La₃Zr₂O₁₂ solid electrolyte for battery applications
    Djenadic, R.; Botros, M.; Benel, C.; Clemens, O.; Indris, S.; Choudhary, A.; Bergfeldt, T.; Hahn, H.
    2014. Solid state ionics, 253, 49–56. doi:10.1016/j.ssi.2014.05.007
  1869. Laserabformung von Mikro- und Nanostrukturen
    Wissmann, M.; Besser, H.; Beiser, M.; Pfleging, W.
    2014. Mikroproduktion, (4), 38–41
  1870. Microstructure and hardness of reactivity r.f. magnetron sputtered Cr-V-O thin films in dependence on composition and substrate bias
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2014. Surface and coatings technology, 257, 355–362. doi:10.1016/j.surfcoat.2014.07.040
  1871. Contactless mechanical stress characterization using the stress dependent shift of the ferromagnetic cut-off frequency of Fe-Co-Hf-N/Ti-N multilayer coatings
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1872. Manufacturing and characterization of Li(NiMnCo)O₂ electrode materials
    Smyrek, P.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1873. Operation and upgrade of the ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Rapson, C.; Reich, M.; Schubert, M.; Schütz, H.; Treutterer, W.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Gantenbein, G.; Jelonnek, J.; Kasparek, W.; Lechte, C.; Plaum, B.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2014. ASDEX Upgrade Team (Ed.), 39th International Conference on Infrared, Millimeter, and THz Waves (IRMMW-THz 2014), Tucson, Ariz., September 14-19, 2014, Article no 6956448, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2014.6956448
  1874. Development of advanced gyrotrons
    Jelonnek, J.; Avramidis, K.; Franck, J.; Gantenbein, G.; Hesch, K.; Jin, J.; Kalaria, P.; Malygin, A.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Samartsev, A.; Schmid, M.; Scherer, T.; Strauss, D.; Thumm, M.; Wu, C.; Zhang, J.
    2014. 39th International Conference on Infrared, Millimeter, and THz Waves (IRMMW-THz 2014), Tucson, Ariz., September 14-19, 2014, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2014.6956447
  1875. Loss tangent measurement on synthetic single diamond (SCD) samples
    Mazzocchi, F.; Scherer, T. A.; Meier, A.; Torge, M.; Yamada, H.
    2014. 39th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2014), Ali Chukson, AZ, USA, September 14–19, 2014
  1876. High power ECRH and ECCD in moderately collisional ASDEX upgrade H-modes and status of EC system upgrade
    Stober, J.; Sommer, F.; Angioni, C.; Bock, A.; Fable, E.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Petzold, B.; Poli, E.; Schubert, M.; Schütz, H.; Wagner, D.; Zohm, H.; Kasparek, W.; Plaum, B.; Meier, A.; Scherer, T.; Strauß, D.; Jelonnek, J.; Thumm, M.; Litvak, A.; Denisov, G. G.; Chirkov, A. V.; Tai, E. M.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Soluyanov, E. A.; Malygin, V.
    2014. 18th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC 2014), Nara, J, April 22-25, 2014
  1877. The upgraded collective Thomson scattering diagnostic of FTU for ion temperature and PDI investigations
    Bruschi, A.; Bin, W.; Centioli, C.; D’Arcangelo, O.; Figini, L.; Galperti, C.; Garavaglia, S.; Granucci, G.; Grossetti, G.; Grosso, G.; Lubiako, L.; Minelli, D.; Nardone, A.; Moro, A.; Simonetto, A.; Tartari, U.; Vellucci, M.
    2014. 9th International Workshop ’Strong Microwaves and Terahertz Waves: Sources and Applications’, Nizhny Novgorod, Russia, July 24-30, 2014
  1878. DEMO: Assessment on ECCD efficiency with respect to engineering constraints
    Grossetti, G.; Geßner, R.; Jelonnek, J.; Poli, E.; Schreck, S.; Strauß, D.; Tardini, G.; Vaccaro, A.; Zohm, H.
    2014. 9th International Workshop ’Strong Microwaves and Terahertz Waves: Sources and Applications’, Nizhny Novgorod, Russia, July 24-30, 2014
  1879. New ideas on a DEMO ECRH system
    Zohm, H.; Grossetti, G.; Laqua, H.; Poli, E.; Tardini, G.
    2014. 26th Joint Russian-German Meeting on ECRH and Gyrotrons, Nizhny Novgorod, Russia, July 22-30, 2014
  1880. Single crystalline diamond (SCD) loss measurements and test bench concepts
    Mazzocchi, F.; Scherer, T.; Yamada, H.
    2014. Workshop on RF Heating Technology of Fusion Plasmas 2014, US-EU-JPN RF Heating Technology Workshop, Sedona, Ariz., September 22-24, 2014
  1881. Thermal behavior of a diamond window unit for fusion applications
    Vaccaro, A.; Scherer, T.
    2014. Workshop on RF Heating Technology of Fusion Plasmas 2014, US-EU-JPN RF Heating Technology Workshop, Sedona, Ariz., September 22-24, 2014
  1882. Recent upgrades of the ITER ECRH CVD torus window
    Scherer, T.
    2014. Workshop on RF Heating Technology of Fusion Plasmas 2014, US-EU-JPN RF Heating Technology Workshop, Sedona, Ariz., September 22-24, 2014
  1883. Design validation of the CVD diamond window unit for the ITER EC H&CD upper launcher
    Aiello, G.; Meier, A.; Gagliardi, M.; Saibene, G.; Schreck, S.; Strauss, D.; Vaccaro, A.; Scherer, T.
    2014. Proceedings of the 9th International Workshop ’Strong Microwaves and Terahertz Waves: Sources and Applications’, 9th International Workshop ’Strong Microwaves and Terahertz Waves: Sources and Applications’, Nizhny Novgorod, Russia, July 24-30, 2014
  1884. Design validation of the CVD diamond window unit for the ITER EC H&CD upper launcher
    Aiello, G.; Meier, A.; Gagliardi, M.; Saibene, G.; Schreck, S.; Strauss, D.; Vaccaro, A.; Scherer, T.
    2014. 9th International Workshop ’Strong Microwaves and Terahertz Waves: Sources and Applications’, Nizhny Novgorod, Russia, July 24-30, 2014
  1885. Progress in the ITER electron cyclotron heating and current drive system design
    Omori, T.; Albajar, F.; Bonicelli, T.; Carannante, G.; Cavinato, M.; Cismondi, F.; Darbos, C.; Denisov, G.; Farina, D.; Gagliardi, M.; Gandini, F.; Gassmann, T.; Goodman, T.; Hanson, G.; Henderson, M. A.; Kajiwara, K.; McElhaney, K.; Nousiainen, R.; Oda, Y.; Oustinov, A.; Parmar, D.; Popov, V. L.; Purohit, D.; Rao, S. L.; Rasmussen, D.; Rathod, V.; Ronden, D. M. S.; Saibene, G.; Sakamoto, K.; Sartori, F.; Scherer, T.; Singh, N. P.; Strauß, D.; Takahashi, K.
    2014. 28th Symposium on Fusion Technology (SOFT 2014), San Sebastian, E, September 29 - October 3, 2014
  1886. ITER ECRH upper launcher torus diamond window. Prototyping, testing and qualification
    Schreck, S.; Aiello, G.; Meier, A.; Strauss, D.; Ikeda, R.; Oda, Y.; Sakamoto, K.; Takahashi, K.; Scherer, T.
    2014. 28th Symposium on Fusion Technology (SOFT 2014), San Sebastian, E, September 29 - October 3, 2014
  1887. The upgraded collective Thomson scattering diagnostic of FTU
    Bin, W.; Bruschi, A.; D’Arcangelo, O.; Grosso, G.; Lubiako, L.; Tartari, U.; Figini, L.; Garavaglia, S.; Grossetti, G.; Moro, A.; Orsitto, F.; Centioli, C.; Galperti, C.; Granucci, G.; Mellera, V.; Minelli, D.; Nardone, A.; Simonetto, A.; Vellucci, M.
    2014. 28th Symposium on Fusion Technology (SOFT 2014), San Sebastian, E, September 29 - October 3, 2014
  1888. The EFDA goal oriented training program GOT-4 diagnostic techniques
    Mazzocchi, F.; Scherer, T.; Micolon, F.; Daudel, T.; Salasca, S.; Chantant, M.; Flammini, D.; Moro, F.; Villari, R.; Muraro, A.; Tardocchi, M.; Friese, S.; Neubauer, O.; Leysen, W.; Palermo, I.; Mota, F.; Bodnar, G.; Nemeth, J.; Morlock, C.
    2014. 28th Symposium on Fusion Technology (SOFT 2014), San Sebastian, E, September 29 - October 3, 2014
  1889. Thermal behavior of a diamond window unit for fusion applications
    Vaccaro, A.; Aiello, G.; Meier, A.; Strauß, D.; Scherer, T.
    2014. 39th International Conference on Infrared, Millimeter, and THz Waves (IRMMW-THz 2014), Tucson, Ariz., September 14-19, 2014
  1890. Diamond windows diagnostics for nuclear fusion applications. Early concepts
    Mazzocchi, F.; Aiello, G.; Meier, A.; SChreck, S.; Spaeh, P.; Strauss, D.; Scherer, T.
    2014. 18th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC 2014), Nara, J, April 22-25, 2014
  1891. Progress of the ITER EC H&CD upper launcher
    Strauss, D.; Aiello, G.; Bruschi, A.; Chavan, R.; Farina, D.; Figini, L.; Gagliardi, M.; Garcia, V.; Goodman, T. P.; Grossetti, G.; Heemskerk, C.; Henderson, M. A.; Kasparek, W.; Krause, A.; Landis, J. D.; Meier, A.; Moro, A.; Platania, P.; Plaum, B.; Poli, E.; Ronden, D.; Saibene, G.; Sanchez, F.; Sauter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Vaccaro, A.; Weinhorst, B.
    2014. Fusion engineering and design, 89, 1669–1673. doi:10.1016/j.fusengdes.2014.02.045
  1892. The ITER EC H&CD upper launcher: Seismic analysis
    Aiello, G.; Vaccaro, A.; Combescure, D.; Gessner, R.; Grossetti, G.; Meier, A.; Saibene, G.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.
    2014. Fusion engineering and design, 89, 1809–1813. doi:10.1016/j.fusengdes.2014.03.036
  1893. Impact of substrate bias variation on composition, microstructure and microhardness of r.f. magnetron sputtered Cr-V-O thin films
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1894. W laminate materials made of UFG W foil
    Reiser, J.; Nemeth, A.; Bonk, S.; Franke, P.; Weingärtner, T.; Hoffmann, J.; Rieth, M.; Möslang, A.; Armstrong, D.; Hoffmann, A.
    2014. Biennial International Conference ’Materials Science Engineering (MSE 2014)’, Darmstadt, September 23-25, 2014
  1895. Status and prospects of gyrotron development at KIT: 2014 update
    Jelonnek, J.; Avramidis, K. A.; Franck, J.; Gantenbein, G.; Hesch, K.; Illy, S.; Jin, J.; Kalaria, P.; Malygin, A.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Samartsev, A.; Schlaich, A.; Scherer, T.; Strauss, D.; Thumm, M.; Wu, C.; Zhang, J.
    2014. 4th ITG International Vacuum Electronics Workshop, Bad Honnef, October 13-14, 2014
  1896. Imaging of Li and He distribution inside steel using low-loss EELS
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2014. 18th International Microscopy Congress, Praha, CZ, September 7-12, 2014 Book of Abstracts MS-4-O-3057
  1897. Tensile properties and microstructural analysis of neutron damage and helium embrittlement in European reference steel EUROFER97
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2014. Scientific Conference ’New Materials for Innovative Development of Nuclear Power Engineering’, Dimitrovgrad, Russia, March 24-27, 2014
  1898. Radiation damage in beryllium pebbles after high-temperature exposure at HFR up to 3000 appm helium production
    Chakin, V.; Möslang, A.; Klimenkov, M.; Rolli, R.
    2014. Scientific Conference ’New Materials for Innovative Development of Nuclear Power Engineering’, Dimitrovgrad, Russia, March 24-27, 2014
  1899. TEM investigation of the He bubbles in 9%Cr ferritic steel after neutron irradiation
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2014. 18th International Microscopy Congress, Praha, CZ, September 7-12, 2014 Book of Abstracts MS-14-P-3196
  1900. A generative manufacturing-based concept for flexible, scalable manufacturing of microsystems
    Dickerhof, M.; Kimmig, D.; Adamietz, R.; Iseringhausen, T.; Segal, J.; Vladov, N.; Pfleging, W.; Torge, M.
    2014. 7th Internat.Precision Assembly Seminar (IPAS 2014), Chamonix, F, February 15-18, 2014
  1901. A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries
    Pfleging, W.; Pröll, J.
    2014. Journal of materials chemistry / A, 2 (36), 14918–14926. doi:10.1039/C4TA02353F
  1902. Shut-down dose rate analyses for the ITER electron cyclotron-heating upper launcher
    Weinhorst, B.; Serikov, A.; Fischer, U.; Lu, L.; Spaeh, P.; Strauss, D.
    2014. Fusion engineering and design, 89, 1899–1904. doi:10.1016/j.fusengdes.2014.04.073
  1903. Lasergestützte Modifikation von Lithiummanganoxid und Lithiumnickelmangankobaltoxid. PhD dissertation
    Pröll, J.
    2014. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000042254
  1904. Alternative theoretical approach of the exact ferromagnetic resonance frequency for common sample shapes by considering the phenomenological damping parameter. A tribute to C.Kittel and T.L. Gilbert
    Seemann, K.; Leiste, H.; Krüger, K.
    2014. Magnetic resonance in solids, 16 (3), Article 14301
  1905. Contactless temperature and mechanical stress inspection of Fe-Co-Hf-N/Ti-N multilayer coatings using high frequency sensor signals
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.
    2014. 10th European Conference on Magnetic Sensors and Actuators (EMSA), Wien, A, July 6-9, 2014
  1906. Status of EU’s contribution to the ITER EC system and global IO/F4E activities for system integration
    Albajar, F.; Bonicelli, T.; Batista, R.; Brescan, C.; Camino, K.; Carannante, G.; Casarin, V.; Castillo, A.; Cauvard, F.; Cavalieri, C.; Cavinato, M.; Cismondi, F.; Combescure, D.; Gagliardi, M.; Gracia, V.; Nousiainen, R.; Pacheco, J.; Preis, A. K.; Saibene, G.; Sartori, F.; Darbos, C.; Dharmesh, P.; Gandini, F.; Gassmann, T.; Henderson, M.; Takahashi, K.; Toshimichi, O.; Alberti, A.; Avramidis, K.; Braunmueller, F.; Bruschi, A.; Chelis, J.; Fasel, D.; Gantenbein, G.; Hogge, J. P.; Illy, S.; Ioannidis, Z.; Li, F.; Jelonnek, J.; Jin, J.; Latsas, G.; Pagonakis, I.; Rzesnicki, T.; Siravo, U.; Thumm, M.; Tigelis, J.; Tran, M. Q.; Aiello, G.; Bertizzolo, R.; Bruschi, A.; Chavan, R.; Farina, D.; Figini, L.; Gessner, R.; Goodman, T. P.; Grossetti, G.; Heemskerk, C.; Kasparek, W.; Koning, J.; Krause, A. S.; Landis, J. D.; Mazzocchi, F.; Meier, A.; Moro, A.; Nowak, S.; Platania, P.; Poli, E.; Ronden, D.; Sanchez, F.; Sauter, O.; Schlatter, C.; Schreck, S.; Scherer, T.; Serikov, A.; Sozzi, C.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Oosterhout, J. van; Weinhorst, B.; Hermann, V.; Rozier, Y.; Bader, M.; Arnold, F.; Burg, B. von
    2014. 18th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC 2014), Nara, J, April 22-25, 2014
  1907. High-speed plasmonic modulators
    Melikyan, A.; Alloatti, L.; Muslija, A.; Hillerkuss, D.; Schindler, P. C.; Li, J.; Palmer, R.; Korn, D.; Lindenmann, N.; Muehlbrandt, S.; Walheim, S.; Vincze, P.; Leufke, P. M.; Ulrich, S.; Ye, J.; Thourhout, D. van; Chen, B.; Dinu, R.; Sommer, M.; Hahn, H.; Schimmel, T.; Koos, C.; Kohl, M.; Freude, W.; Leuthold, J.
    2014. Integrated Photonics Research, Silicon, and Nanophotonics (IPR), San Diego, Calif., July 13-16, 2014
  1908. High-speed plasmonic modulators
    Melikyan, A.; Alloatti, L.; Muslija, A.; Hillerkuss, D.; Schindler, P. C.; Li, J.; Palmer, R.; Korn, D.; Lindenmann, N.; Muehlbrandt, S.; Walheim, S.; Vincze, P.; Leufke, P. M.; Ulrich, S.; Ye, J.; Thourhout, D. van; Chen, B.; Dinu, R.; Sommer, M.; Hahn, H.; Schimmel, T.; Koos, C.; Kohl, M.; Freude, W.; Leuthold, J.
    2014. Integrated Photonics Research, Silicon, and Nanophotonics (IPR), San Diego, CA, July 13-16, 2014, Paper IT2A.6, Optica Publishing Group (OSA). doi:10.1364/IPRSN.2014.IT2A.6
  1909. Influence of the temperature history on secondary hydriding and mechanical properties of zircaloy-4 claddings. An analysis of the QUENCH-LOCA bundle test
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2014. 22nd International Conference on Nuclear Engineering (ICONE22), Praha, CZ, July 7-11, 2014
  1910. Influence of the temperature history on secondary hydriding and mechanical properties of zircaloy-4 claddings. An analysis of the QUENCH-LOCA bundle test
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2014. 22nd International Conference on Nuclear Engineering (ICONE22), Praha, CZ, July 7-11, 2014, Paper ICONE22–30792, The American Society of Mechanical Engineers (ASME)
  1911. Operation and upgrade of the ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Rapson, C.; Reich, M.; Schubert, M.; Schütz, H.; Treutterer, W.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Gantenbein, G.; Jelonnek, J.; Kasparek, W.; Lechte, C.; Plaum, B.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2014. (ASDEX Upgrade Team, Ed.), 39th International Conference on Infrared, Millimeter, and THz Waves (IRMMW-THz 2014), Tucson, Ariz., September 14-19, 2014
  1912. Development of advanced gyrotrons
    Jelonnek, J.; Avramidis, K.; Franck, J.; Gantenbein, G.; Hesch, K.; Jin, J.; Kalaria, P.; Malygin, A.; Pagonakis, I. G.; Rzesnicki, T.; Ruess, S.; Samartsev, A.; Schmid, M.; Scherer, T.; Strauss, D.; Thumm, M.; Wu, C.; Zhang, J.
    2014. 39th International Conference on Infrared, Millimeter, and THz Waves (IRMMW-THz 2014), Tucson, Ariz., September 14-19, 2014
  1913. The role of copper oxide shell on the microwave sintering and absorption of copper metal powder compacts
    Mahmoud, M. M.; Link, G.; Jelonnek, J.; Thumm, M.
    2014. Materials Science and Technology 2014 (MS&T14), Pittsburgh, Pa., October 12-16, 2014
  1914. Temperature induced ferromagnetic resonance frequency change and resonance line broadening of a Fe-Co-Hf-N film with in-plane uniaxial anisotropy - A theoritcal and experimental study
    Seemann, K.; Krüger, K.; Leiste, H.
    2014. Journal of magnetism and magnetic materials, 369 (November), 142–146. doi:10.1016/j.jmmm.2014.06.022
  1915. Current status and recent research achievements in ferritic/martensitic steels
    Tavassoli, A. A. F.; Diegele, E.; Lindau, R.; Luzginova, N.; Tanigawa, H.
    2014. Journal of nuclear materials, 455, 269–276. doi:10.1016/j.jnucmat.2014.06.017
  1916. Influence of composition and annealing temperature on microstructure and hardness of reactively sputtered Cr-Zr-O thin films
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.
    2014. 7th Symposium on Functional Coatings and Surface Engineering (FCSE), Montreal, CDN, June 15-18, 2014
  1917. From W7-X towards a gyrotron design for DEMO: Ongoing research and development at KIT
    Jelonnek, J.; Avramidis, K. A.; Franck, J.; Gantenbein, G.; Hesch, K.; Illy, S.; Jin, J.; Malygin, A.; Pagonakis, I. G.; Rzesnicki, T.; Samartsev, A.; Schlaich, A.; Scherer, T.; Strauss, D.; Thumm, M.; Zhang, J.
    2014. 18th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC 2014), Nara, J, April 22-25, 2014
  1918. First Operation of a step-frequency tunable 1-MW gyrotron with a diamond brewster angle output window
    Gantenbein, G.; Samartsev, A.; Aiello, G.; Dammertz, G.; Jelonnek, J.; Losert, M.; Schlaich, A.; Scherer, T.; Strauss, D.; Thumm, M.; Wagner, D.
    2014. IEEE transactions on electron devices, 61, 1806–1811. doi:10.1109/TED.2013.2294739
  1919. Entwicklung von Dünnschichtkathoden für Lithium-Ionen-Batterien durch nichtreaktives HF-Magnetronzerstäuben im ternären System Lithium-Mangan-Sauerstoff. PhD dissertation
    Fischer, J.
    2014. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000041299
  1920. A Phase-Field Approach for Wetting Phenomena of Multiphase Droplets on Solid Surfaces
    Ben Said, M.; Selzer, M.; Nestler, B.; Braun, D.; Greiner, C.; Garcke, H.
    2014. Langmuir, 30 (14), 4033–4039. doi:10.1021/la500312q
  1921. Parameters influencing the hydrogen concentration and distribution in cladding tubes after LOCA: Results of bundle-scale experiments and modeling
    Grosse, M.; Stuckert, J.; Steinbrück, M.
    2014. International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Charlotte, N.C., April 6-9, 2014. Vol. 2, 850–856, American Nuclear Society
  1922. Development, characterization and testing of materials of relevance to nuclear energy sector using neutron beams - A progess report of the IAEA coordinated research project
    Grosse, M.; Balagurov, A.; Inozemtsev, V.; Lehmann, E.; Mikula, P.; Ridikas, D.; Törok, G.
    2014. International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Charlotte, N.C., April 6-9, 2014. Vol. 3, 2086–2093, American Nuclear Society
  1923. From ITER towards DEMO: Status and plans for gyrotron developments at KIT
    Jelonnek, J.; Avramidis, K. A.; Franck, J.; Gantenbein, G.; Hesch, K.; Illy, S.; Jin, J.; Kalaria, P.; Malygin, A.; Pagonakis, I. G.; Rzesnicki, T.; Samartsev, A.; Ruess, S.; Schlaich, A.; Scherer, T.; Strauss, D.; Wu, C.; Thumm, M.; Zhang, J.
    2014. 9th International Workshop ’Strong Microwaves and Terahertz Waves: Sources and Applications’, Nizhny Novgorod, Russia, July 24-30, 2014
  1924. Results of the QUENCH-DEBRIS test
    Stuckert, J.; Große, M.; Onel, Y.; Rössger, C.; Steinbrück, M.
    2014. International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Charlotte, N.C., April 6-9, 2014
  1925. Results of the QUENCH-DEBRIS test
    Stuckert, J.; Große, M.; Onel, Y.; Rössger, C.; Steinbrück, M.
    2014. International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Charlotte, N.C., April 6-9, 2014. Vol. 2, 1123–1128, American Nuclear Society
  1926. Thermodynamic investigations and modeling of copper and iron oxides used as conversion electrodes in lithium ion batteries
    Lepple, M.; Franke, P.; Cupid, D. M.; Seifert, H. J.
    2014. TMS 143rd Annual Meeting & Exhibition, San Diego, Calif., February 16-20, 2014
  1927. Thermodynamic modeling of copper and iron oxides used as conversion electrodes in lithium ion batteries
    Lepple, M.; Franke, P.; Cupid, D. M.; Seifert, H. J.
    2014. 38th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2014), Daytona Beach, Fla., January 26-31, 2014
  1928. Lasergestützte Strukturierung und Gefügemodifikation der Elektrodenmaterialien Lithiumcobaltoxid und Zinnoxid für Lithium-Ionen-Batterien. PhD dissertation
    Kohler, R.
    2014. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000039540
  1929. Influence of boron carbide on core degradation during severe accidents in LWRs
    Steinbrück, M.
    2014. Annals of nuclear energy, 64, 43–49. doi:10.1016/j.anucene.2013.09.027
  1930. Two component tungsten powder injection molding - An effective mass production process
    Antusch, S.; Commin, L.; Mueller, M.; Piotter, V.; Weingärtner, T.
    2014. Journal of nuclear materials, 447, 314–317. doi:10.1016/j.jnucmat.2013.11.007
  1931. Development, characterization and testing of materials of relevance to nuclear energy sector using neutron beams - A progess report of the IAEA coordinated research project
    Grosse, M.; Balagurov, A.; Inozemtsev, V.; Lehmann, E.; Mikula, P.; Ridikas, D.; Törok, G.
    2014. International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Charlotte, N.C., April 6-9, 2014
  1932. Parameters influencing the hydrogen concentration and distribution in cladding tubes after LOCA: Results of bundle-scale experiments and modeling
    Grosse, M.; Stuckert, J.; Steinbrück, M.
    2014. International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Charlotte, N.C., April 6-9, 2014
  1933. High-temperature oxidation of Zircaloy-4 in oxygen-nitrogen mixtures
    Steinbrück, M.; Schaffer, S.
    2014. International Symposium on High-temperature Oxidation and Corrosion (ISHOC 2014), Hakodate, J, June 23-27, 2014
  1934. High temperature steam oxidation performance of max phase (Ti₂AlC) coated zirlo
    Pantano, M.; Avincola, V.; Seze, P. A. de; McKrell, T.; Kazimi, M. S.
    2014. International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Charlotte, N.C., April 6-9, 2014
  1935. Structural materials for fusion power plants. International progress and challenges
    Möslang, A.
    2014. Nuklearforum Schweiz, 1.Forums-Treff 2014, Lausanne, CH, 27.Februar 2014
  1936. Enhanced photocatalytik activity of Au/TiO₂ nanocomposite prepared using bifunctional bridging linker
    Miljevic, M.; Geiseler, B.; Bergfeldt, T.; Bockstaller, P.; Fruk, L.
    2014. Advanced functional materials, 24 (7), 907–915. doi:10.1002/adfm.201301484
  1937. Experimental results of the QUENCH-16 bundle test on air ingress
    Stuckert, J.; Steinbrück, M.
    2014. Progress in nuclear energy, 71, 134–141. doi:10.1016/j.pnucene.2013.12.001
  1938. Electrochemical behavior of a laser microstructured fluorine doped tin oxide anode layer with a plasma pretreatment for 3D battery systems
    Park, J. H.; Kohler, R.; Pfleging, W.; Choi, W.; Seifert, H. J.; Lee, J. K.
    2014. RSC Advances, 4 (9), 4247–4252. doi:10.1039/C3RA44541K
  1939. Laser-printing and femtosecond-laser structuring of LiMn₂O₄ composite cathodes for Li-ion microbatteries
    Pröll, J.; Kim, H.; Pique, A.; Seifert, H. J.; Pfleging, W.
    2014. Journal of Power Sources, 255, 116–124. doi:10.1016/j.jpowsour.2013.12.132
  1940. Designing 3D conical-shaped lithium-ion microelectrodes
    Lim, D. G.; Chung, D. W.; Kohler, R.; Proell, J.; Scherr, C.; Pfleging, W.; Garcia, R. E.
    2014. Journal of the Electrochemical Society, 161 (3), A302-A307. doi:10.1149/2.013403jes
  1941. Ferritische ODS-Stähle - Herstellung, Umformung und Strukturanalyse. PhD dissertation
    Hoffmann, J.
    2014. KIT Scientific Publishing. doi:10.5445/KSP/1000037770
  1942. Optimization of Cr-Content for High-Temperature Oxidation Behavior of Co–Re–Si-Base Alloys
    Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
    2013. Oxidation of Metals, 80 (1-2), 49–59. doi:10.1007/s11085-013-9369-z
  1943. X-Ray Diffraction Studies of Heterostructures Based on Solid Solutions AlxGa1-xAsyP1-y : Si
    Seredin, P. V.; Glotov, A. V.; Len’shin, A. S.; Arsent’ev, I. N.; D. A. Vinokurov; Tarasov, I. S.; Leiste, H.; Ternovaya, V. E.; Prutskij, T.
    2013. Physics of the solid state, 55 (10), 2161–2164. doi:10.1134/S1063783413100296
  1944. Constitution, microstructure and mechanical properties of magnetron-sputtered TiC/a-C nanocomposite coatings
    Rinke, M.; Stüber, M.; Ziebert, C.; Lattemann, M.; Ulrich, S.
    2013. 7-th Symposium on Vacuum based Science and Technology in conjunction with the 12-th Annual Meeting of the German Vacuum Society, Kolobrzeg, PL, November 19-21, 2013
  1945. Coulometric titration for Li-ion batteries
    Gotcu-Freis, P.; Seifert, H.
    2013. WeNDeLib Summer School, Monschau, September 24-27, 2015
  1946. Thermodynamic and electrochemical investigations of electrode materials for Li-ion batteries
    Gotcu-Freis, P.; Seifert, H.
    2013. 27th International Seminar on Heterogeneous Multicomponent Equilibria: Materials Science International Team eeting, Ringberg, February 10-16, 2013
  1947. Advanced coupled simulation methods for heat transfer and stiffnessphenomena induced by fluid flow in metal foams
    Kneer, A.; Janssen-Tapken, K.; Reimann, K.; August, A.; Nestler, B.
    2013. 5th International Conference on Computational Methods for Coupled Problems in Sciennce and Engineering, Santa Eulalia, Ibiza, E, June 17-19, 2013
  1948. Development and numerical investigation of metal foam based modular latent heat storage cell
    Kneer, A.; August, A.; Nestler, B.; Martens, E.
    2013. 2nd International Conference on Materials for Energy (EnMat 2013), Karlsruhe, 12.-16. Mai 2013
  1949. Thermal conductivity of air filled open cell aluminum foams
    August, A.; Nestler, B.; Rölle, M.; Schmid, S.; Ettrich, J.
    2013. 2nd International Conference on Materials for Energy (EnMat 2013), Karlsruhe, 12.-16. Mai 2013
  1950. Constitution and microstructure of Li-Ni-Mn-Co-O thin film cathodes
    Ulrich, S.; Seifert, H. J.; Strafela, M.; Fischer, J.; Rinke, M.; Bergfeldt, T.
    2013. 3.Statustreffen des Helmholtz Portfolios ’Elektrochemische Speicher im System - Zuverlässigkeit und Integration’, Karlsruhe, 11.-12.Dezember 2013
  1951. Constitution and microstructure of magnetron sputtered Li-Ni-Mn-Co-O thin film cathodes for lithiumion batteries as a function of working gas pressure
    Strafela, M.; Fischer, J.; Rinke, M.; Bergfeldt, T.; Ulrich, S.; Seifert, H. J.
    2013. 7-th Symposium on Vacuum based Science and Technology in conjunction with the 12-th Annual Meeting of the German Vacuum Society, Kolobrzeg, PL, November 19-21, 2013
  1952. Flow anisotropy in sheared fractures with self-affine surfaces
    Schoenball, M.; Selzer, M.; Kühnle, N.; Nestler, B.; Schmittbuhl, J.; Kohl, T.
    2013. Proceedings of the European Geothermal Congress 2013, Pisa, I, June 3-7, 2013, European Geothermal Congress
  1953. Helium bubble morphology of boron alloyed EUROFER97 after neutron irradiation
    Klimenkov, M.; Möslang, A.; Materna-Morris, E.; Schneider, H. C.
    2013. Journal of Nuclear Materials / Supplement 1, 442 (1–3), S52–S57. doi:10.1016/j.jnucmat.2013.04.022
  1954. ICMCTF 2012. Preface
    Abadias, G.; Aouadi, S.; Petrov, I.; Rebholz, C.; Stüber, M.; Veprek, S.
    2013. Thin Solid Films, 528, 1. doi:10.1016/j.tsf.2012.10.098
  1955. Microstructure evolution of radio-frequency magnetron sputtered oxide thin films in the Cr-Zr-O system
    Spitz, S.; Stueber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2013. Thin Solid Films, 548, 143–149. doi:10.1016/j.tsf.2013.09.038
  1956. Creep-fatigue design rules for Eurofer97
    Özkan, F.; Aktaa, J.
    2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013
  1957. Einfluss von Näpfchentexturen auf die Reibung von Stahl 100Cr6 und SSiC im einsinnigen oder reversierenden, mediengeschmierten Gleitkontakt gegen Saphir oder SSiC-Keramik. PhD dissertation
    Mann, M.
    2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000044757
  1958. Effect of surface topography on hydrophobicity and bacterial adhesion of polystyrene
    Mohamad, A. J.; Zhu, X.; Liu, X.; Pfleging, W.; Torge, M.
    2013. International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), Suzhou, China, August 26-30, 2013
  1959. Effect of surface topography on hydrophobicity and bacterial adhesion of polystyrene
    Mohamad, A. J.; Zhu, X.; Liu, X.; Pfleging, W.; Torge, M.
    2013. Proceedings of the International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), Suzhou, CHN, August 26-30, 2013. Ed. A. Sill, 228–233, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/3M-NANO.2013.6737421
  1960. Divertor design and Materials
    Rieth, M.
    2013. Bereichsseminar ’Plasmarand und Wand’, IPP, Garching, 10.April 2013
  1961. Thin film passivation of laser generated 3D micro patterns in lithium manganese oxide cathodes
    Pröll, J.; Kohler, R.; Bruns, M.; Oberst, V.; Weidler, P. G.; Heißler, S.; Kübel, C.; Scherer, T.; Prang, R.; Seifert, H. J.; Pfleging, W.
    2013. Photonics West 2013, San Francisco, Calif., February 2-7, 2013
  1962. Laser-induced self-organizing surface structures on cathode materials for lithium-ion batteries
    Kohler, R.; Pröll, J.; Bruns, M.; Scherer, T.; Seifert, H. J.; Pfleging, W.
    2013. Photonics West 2013, San Francisco, Calif., February 2-7, 2013
  1963. The ITER EC H&CD upper launcher: Seismic analysis
    Aiello, G.; Vaccaro, A.; Combescure, D.; Gessner, R.; Grossetti, G.; Meier, A.; Saibene, G.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  1964. Conical surface structures on model thin-film electrodes and tape-cast electrode materials for lithium-ion batteries
    Kohler, R.; Proell, J.; Bruns, M.; Ulrich, S.; Seifert, H. J.; Pfleging, W.
    2013. Applied physics / A, 112 (1), 77–85. doi:10.1007/s00339-012-7205-y
  1965. Modeling of the hydrogen distribution in cladding tubes after LOCA
    Grosse, M.
    2013. 19th International QUENCH Workshop, Karlsruhe, November 19-21, 2013
  1966. Neutron and X-ray imaging investigations concerning the QUENCH program
    Grosse, M.; Nshimirimana, R.; Steinbrück, M.; Rössger, C.; Grünzweig, C.; Kaestner, A.; Kardjilov, N.; Onel, Y.
    2013. 19th International QUENCH Workshop, Karlsruhe, November 19-21, 2013
  1967. Modeling of the hydrogen distribution in cladding tubes after LOCA
    Grosse, M.
    2013. Proceedings of the 19th International QUENCH Workshop, Karlsruhe, November 19- 21, 2013. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1968. Neutron and X-ray imaging investigations concerning the QUENCH program
    Grosse, M.; Nshimirimana, R.; Steinbrück, M.; Rössger, C.; Grünzweig, C.; Kaestner, A.; Kardjilov, N.; Onel, Y.
    2013. Proceedings of the 19th International QUENCH Workshop, Karlsruhe, November 19- 21, 2013. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1969. KIT gyrotron development for future fusion applications
    Jelonnek, J.; Avramidis, K.; Franck, J.; Gantenbein, G.; Hesch, K.; Illy, S.; Jin, J.; Malygin, A.; Pagonakis, I.; Rzesnicki, T.; Samartsev, A.; Scherer, T.; Schlaich, A.; Schmid, M.; Strauss, D.; Thumm, M.; Zhang, J.
    2013. 38th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-Thz’13), Mainz, 1.-6. September 2013, Article no 6665487, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2013.6665487
  1970. Phase-field simulations at the atomic scale in comparison to molecular dynamics
    Berghoff, M.; Selzer, M.; Nestler, B.
    2013. The ScientificWorld journal, 2013, 564272. doi:10.1155/2013/564272
  1971. Efficient techniques for bridging from atomic to mesoscopic scale in phase-field simulations
    Berghoff, M.; Selzer, M.; Choudhury, A.; Nestler, B.
    2013. Journal of Computational Methods in Sciences and Engineering, 13 (5-6), 441–454. doi:10.3233/JCM-130476
  1972. Modeling and measuring the optical coupling of lumped element kinetic inductance detectors at 120-180 GHz
    Rösch, M. J.; Mattiocco, F.; Scherer, T. A.; Siegel, M.; Schuster, K.-F.
    2013. IEEE transactions on antennas and propagation, 61 (4), 1939–1946. doi:10.1109/TAP.2012.2231933
  1973. Sensitivity optimization of injection-molded photonic crystal slabs for biosensing applications
    Nazirizadeh, Y.; Oertzen, F. von; Plewa, K.; Barié, N.; Jakobs, P.-J.; Guttmann, M.; Leiste, H.; Gerken, M.
    2013. Optical materials express, 3 (5), 556–565. doi:10.1364/ome.3.000556
  1974. Tribologie - Tribologische Aspekte der Funktionssicherheit von Mikrokomponenten. (Teilprojekt D3)
    Schneider, J.; Zum Gahr, K. H.
    2013. Kraft, O. [Hrsg.] Entwicklung, Produktion und Qualitätssicherung urgeformter Mikrobauteile aus metallischen und keramischen Werkstoffen Abschlussbericht Sonderforschungsbereich 499 KIT Scientific Reports, KIT-SR 7607 (März 2013), 252–271
  1975. Overview of LWR severe accident research activities at the Karlsruhe Institute of Technology
    Miassoedov, A.; Steinbrück, M.; Tromm, W.
    2013. Transactions of the American Nuclear Society, 109, 928–930
  1976. Experimental assessment of accident scenarios for the high temperature reactor fuel system
    Seeger, O.; Avincola, V.; Laurie, M.; Bottomley, P. D. W.; Rondinella, V. V.; Allelein, H. J.
    2013. ATW - International Journal for Nuclear Power, 58, 618–625
  1977. A comparison of core degradation phenomena in the CORA, QUENCH, Phebus SFD and Phebus FP experiments
    Haste, T.; Steinbrück, M.; Barrachin, M.; Luze, O. de; Grosse, M.; Stuckert, J.
    2013. Proceedings of the 22nd International Conference Nuclear Energy for New Europe (NENE2013), Bled, SLO, September 9-12, 2013. Ed.: L. Cizelj, Nuclear Society of Slovenia
  1978. Zry-4 oxidation in mixed oxygen-nitrogen atmospheres
    Steinbrück, M.; Schaffer, S.
    2013. 19th International QUENCH Workshop, Karlsruhe, November 19-21, 2013
  1979. Update of the QUENCH programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2013. 19th International QUENCH Workshop, Karlsruhe, November 19-21, 2013
  1980. Status der Arbeiten in den AP 2.4.3 Thermochemie und AP 3.1 Thermodynamische Daten
    Dang, S.; Prill, M.; Markus, T.; Gotcu-Freis, P.; Ziebert, C.; Seifert, H. J.
    2013. 3.Statustreffen des Helmholtz Portfolios ’Elektrochemische Speicher im System - Zuverlässigkeit und Integration’, Karlsruhe, 11.-12.Dezember 2013
  1981. Electrochemical-calorimetric studies for the determination of heat data of 40 Ah lithium ion pouch cells
    Ziebert, C.; Schuster, E.; Seifert, H. J.
    2013. 4th Annual International Conference ’Battery Safety’, San Diego, Calif., November 14-15, 2013
  1982. Phosphate based ceramics as solid electrolyte for high temperature Li ion batteries
    Cui, Y.; Ziebert, C.; Rohde, M.
    2013. 4.Statuskolloquium der Helmholtz-Energie-Allianz ’Stationäre elektrochemische Feststoff-Speicher und -Wandler’, Stuttgart, 31.Oktober 2013
  1983. Electrochemical-calorimetric studies on different lithium ion pouch cells
    Schuster, E.; Ziebert, C.; Seifert, H. J.
    2013. 3rd European Energy Conference, Budapest, H, October 27-30, 2013
  1984. Status der Arbeiten im Teilvorhaben Zustandsanalyse von Li-Ionen-Zellen und -Batterien durch elektrochemisch-thermische Untersuchungen und Modellierungen im BMBF-Projekt IKEBA
    Ziebert, C.; Rohde, M.; Seifert, H. J.
    2013. 2.IKEBA Statustreffen, Dresden, 21.-22.Oktober 2013
  1985. Geplante Arbeiten des IAM-AWP im BMBF-Projekt ’Integrierte Komponenten und integrierter Entwurf energieeffizienter Batteriesysteme (IKEBA)’
    Ziebert, C.; Rohde, M.; Seifert, H. J.
    2013. IKEBA Kickoff-Meeting, Ulm, 2.-3.Juli 2013
  1986. Advanced lithium ion battery materials. Coupling thermodynamics and electrochemistry
    Seifert, H. J.; Ziebert, C.; Cupid, D. M.; Franke, P.
    2013. BIT’s 2nd Annual World Congress of Advanced Materials, Suzhou, China, June 5-7, 2013
  1987. Combined electrochemical - thermodynamic investigations of lithium ion batteries
    Ziebert, C.; Rohde, M.; Seifert, H. J.
    2013. International Conference on Energy and Sustainability, Hangzhou, China, May 11-13, 2013
  1988. Electrochemical-calorimetric studies for the determination of heat data of cylindrical lithium ion cells
    Ziebert, C.; Seifert, H. J.
    2013. 3.Statustreffen des Helmholtz Portfolios ’Elektrochemische Speicher im System - Zuverlässigkeit und Integration’, Karlsruhe, 11.-12.Dezember 2013
  1989. Electrochemical studies using GITT in cells with 3D structured intercalation cathode materials
    Gotcu-Freis, P.; Pfleging, W.; Mangang, M.; Bergfeldt, T.; Prill, M.; Markus, T.; Seifert, H. J.
    2013. 3.Statustreffen des Helmholtz Portfolios ’Elektrochemische Speicher im System - Zuverlässigkeit und Integration’, Karlsruhe, 11.-12.Dezember 2013
  1990. The EERA joint programme on energy storage
    Seifert, H. J.; Diegele, E.; Ziebert, C.
    2013. 2nd International Conference on Materials for Energy (EnMat 2013), Karlsruhe, 12.-16. Mai 2013
  1991. Electrochemical-calorimetric studies on safety fundamentals of cylindrical lithium ion cells
    Ziebert, C.; Seifert, H. J.
    2013. 2nd International Conference on Materials for Energy (EnMat 2013), Karlsruhe, 12.-16. Mai 2013
  1992. Zry-4 oxidation in mixed oxygen-nitrogen atmospheres
    Steinbrück, M.; Schaffer, S.
    2013. Proceedings of the 19th International QUENCH Workshop, Karlsruhe, November 19-21, 2013. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1993. Update of the QUENCH programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2013. Proceedings of the 19th International QUENCH Workshop, Karlsruhe, November 19-21, 2013. Hrsg.: M. Steinbrück, Karlsruher Institut für Technologie (KIT)
  1994. Energy Storage techniques
    Zieberg, C.; Seifert, H. J.
    2013. Colloquium 2013: Physics and the Energy Challenge, Bruxelles, B, April 20, 2013
  1995. Kalorimetrie für Lithium-Ionen-Batterien
    Ziebert, C.; Cupid, D. M.; Seifert, H. J.
    2013. 20.Ulm-Freiberger Kalorimetrietage, Freiberg, 27.Februar - 21.März 2013
  1996. Electrochemical-calorimetric studies on safety fundamentals of 40 Ah NMC lithium ion pouch cells
    Ziebert, C.; Schuster, E.; Seifert, H. J.
    2013. 5.Internat.Symp.’Kraftwerk Batterie’ : Lösungen für Automobil und Energieversorung, Aachen, 26.-27.Februar 2013
  1997. Experimental program QUENCH at KIT on core degradation during reflooding under LOCA conditions and in the early phase of a severe accident
    Stuckert, J.; Steinbrück, M.; Grosse, M.
    2013. Technical Meeting on Modelling of Water-Cooled Fuel Including Design-Basis and Severe Accidents, Chengdu, China, October 28 - November 1, 2013
  1998. A comparison of core degradation phenomena in the CORA, QUENCH, Phebus SFD and Phebus FP experiments
    Haste, T.; Steinbrück, M.; Barrachin, M.; Luze, O. de; Grosse, M.; Stuckert, J.
    2013. 22nd International Conference Nuclear Energy for New Europe (NENE2013), Bled, SLO, September 9-12, 2013
  1999. Deviations from the parabolic kinetics during oxidation of zirconium alloys
    Steinbrück, M.; Große, M.
    2013. 17th International Symposium on Zirconium in the Nuclear Industry, Hyderabad, IND, February 3-7, 2013
  2000. Elastocaloric cooling using shape memory alloy films
    Ossmer, H.; Chluba, C.; Krevet, B.; Quandt, E.; Rohde, M.; Kohl, M.
    2013. 13th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2013), London, GB, December 3-6, 2013
  2001. Separate-effects test on air ingress in the framework of SFP and KIT activities
    Steinbrück, M.
    2013. OECD-SFP (Sandia Fuel Program) Final Project Seminar, Paris, F, October 22-23, 2013
  2002. High-temperature oxidation and mutual interactions of materials during severe accidents in LWRs
    Steinbrück, M.
    2013. Vortr.: Ecole Nationale Superieure des Mines, Saint-Etienne, F, 18.Dezember 2013
  2003. Potential KIT contributions to ATF research
    Steinbrück, M.
    2013. 2nd Meeting on Increased Accident Tolerance of Fuels for LWRs, Issy-les-Moulineaux, F, October 28-29, 2013
  2004. Elastocaloric cooling using shape memory alloy films
    Ossmer, H.; Chluba, C.; Krevet, B.; Quandt, E.; Rohde, M.; Kohl, M.
    2013. Journal of Physics: Conference Series, 476, 012138/1–5. doi:10.1088/1742-6596/476/1/012138
  2005. Feststoffelektrolyte für Hochtemperatur-Lithiumionenbatterien
    Cui, Y.; Ziebert, C.; Rohde, M.
    2013. Breh, W. [Hrsg.] Impulse für die Zukunft der Energie : Wissenschaftliche Beiträge des KIT zur 2.Jahrestagung des KIT-Zentrums Energie Doktorandensymposium, 13.06.2013 KIT Scientific Reports, KIT-SR 7646 (Dezember 2013), 33–38
  2006. Feststoffelektrolyte für Hochtemperatur-Lithiumionenbatterien
    Cui, Y.; Ziebert, C.; Rohde, M.
    2013. Impulse für die Zukunft der Energie : 2.Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 13.Juni 2013
  2007. Ferritische ODS-Stähle - Herstellung, Umformung und Strukturanalyse. PhD dissertation
    Hoffmann, J.
    2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000037768
  2008. An additive manufacturing and e-printing based approach for flexible scalable manufacturing of microsystems
    Dickerhof, M.; Kimmig, D.; Scholz, S.; Woegener, C.; Adamietz, R.; Pfleging, W.
    2013. 10th Internat.Conf.on Multi-Material Micro Manufacture (4M 2013), San Sebastian, E, October 8-10, 2013
  2009. An additive manufacturing and e-printing based approach for flexible scalable manufacturing of microsystems
    Dickerhof, M.; Kimmig, D.; Scholz, S.; Woegener, C.; Adamietz, R.; Pfleging, W.
    2013. 4M 2013, 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, S, October 8-10, 2013. Ed.: S. Azcarate, 288–291, Research Publishing
  2010. Structural transformation of sputtered ο-LiMnO₂ thin-film cathodes induced by electrochemical cycling
    Fischer, J.; Chang, K.; Ye, J.; Ulrich, S.; Ziebert, C.; Music, D.; Hallstedt, B.; Seifert, H. J.
    2013. Thin solid films, 549, 263–267. doi:10.1016/j.tsf.2013.08.095
  2011. Microstructural characterization of neutron irradiated EUROFER97
    Klimenkov, M.
    2013. 5th Workshop on Nuclear Fe Alloys : Modeling and Experiment, Roma, I, November 28-29, 2013
  2012. A study of hardness and adhesion of laser bonded MoO₃ layers on stainless steel
    Mihalev, M.; Hardalov, C.; Christov, C. G.; Leiste, H.
    2013. 23rd National Scientific Symposium with International Participation on Meteorology and Meteorology Assurance, Sozopol, BG, September 7-11, 2013
  2013. Microstructural characterization of thin laser bonded coatings based on transitional metal oxides powder
    Mihalev, M.; Hardalov, C.; Chirstov, C. G.; Leiste, H.
    2013. 23rd National Scientific Symposium with International Participation on Meteorology and Meteorology Assurance, Sozopol, BG, September 7-11, 2013
  2014. Exploring coating materials based on the Cr-B-N system for the corrosionwear protection of stainless steels
    Dearnley, P.; Stueber, M.; Mallia, B.
    2013. 40th Internat.Conf.on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Calif., April 29 - May 3, 2013
  2015. Functionally graded tungsten/EUROFER97 interlayers for joints in helium-cooled divertor components
    Weber, T.; Aktaa, J.; Basuki, W. W.; Stüber, M.; Ulrich, S.; Vaßen, R.; Zhou, Z.; Qu, D.
    2013. 14th Internat.Conf.on Plasma-Facing Materials and Components for Fusion Applications, Jülich, May 13-17, 2013
  2016. Metastable hard (V,Al)N thin films by magnetron sputtering
    Stüber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2013. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, E, September 8-13, 2013
  2017. Entwicklung und tribologische Charakterisierung von TiC/a-C-Nanokompositen im Hinblick auf den Einsatz in mangelgeschmierten Gleitkontakten
    Schneider, J.; Stüber, M.
    2013. Tribologie Fachtagung 2013, Göttingen, 30.September - 2.Oktober 2013
  2018. Microstructure, mechanical and friction behavior of magnetronsputtered VC coatings
    Stüber, M.; Stoyanov, P.; Nold, E.; Schneider, J.; Ulrich, S.
    2013. American Vacuum Society 60th International Symposium, Long Beach, Calif., October 27 - November 1, 2013
  2019. A study of hardness and adhesion of laser bonded MoO₃ layers on stainless steel
    Mihalev, M.; Hardalov, C.; Christov, C. G.; Leiste, H.
    2013. 23rd National Scientific Symposium with International Participation on Meteorology and Meteorology Assurance, Sozopol, BG, September 7-11, 2013 Proceedings, 240–245
  2020. Microstructural characterization of thin laser bonded coatings based on transitional metal oxides powder
    Mihalev, M.; Hardalov, C.; Chirstov, C. G.; Leiste, H.
    2013. 23rd National Scientific Symposium with International Participation on Meteorology and Meteorology Assurance, Sozopol, BG, September 7-11, 2013 Proceedings, 233–238
  2021. Nonlinear nano-photonics
    Freude, W.; Alloatti, L.; Korn, D.; Lauermann, M.; Melikyan, A.; Palmer, R.; Pfleifle, J.; Schindler, P. C.; Weimann, C.; Dinu, R.; Bolten, J.; Wahlbrink, T.; Waldow, M.; Walheim, S.; Leufke, P.; Ulrich, S.; Ye, J.; Vincze, P.; Hahn, H.; Yu, H.; Bogaerts, W.; Brasch, V.; Herr, T.; Holzwarth, R.; Hartinger, K.; Stamatidis, C.; O’Keefe, M.; Stampoulidis, L.; Zimmermann, L.; Baets, R.; Schimmel, T.; Tomkos, I.; Petermann, K.; Kippenberg, T. J.; Koos, C. G.; Leuthold, J.
    2013. Frontiers in Optics: The 97th OSA Annual Meeting and Exhibit/Laser Science XXIX, Orlando, Fla., October 6-10, 2013
  2022. PVD synthesis of novel metastable solid solution oxide and oxinitride thin films
    Stüber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2013. International Conference on Processing and Manufacturing of Advanced Materials (THERMEC 2013), Las Vegas, Nev., December 2-6, 2013
  2023. Feststoffelektrolyte für Hochtemperatur-Lithiumionenbatterien. Herstellung und Charakterisierung von Feststofferelektrolyten und darauf basierenden Zellen
    Cui, Y.; Ziebert, C.; Rohde, M.
    2013. Impulse für die Zukunft der Energie : wissenschaftliche Beiträge des KIT zur 2. Jahrestagung des KIT-Zentrums Energie, Doktorandensymposium, 13.06.2013. Hrsg.: W. Breh, 33–38, KIT Scientific Publishing
  2024. Tungsten (W) foil laminate materials. Advances for innovative high temperature energy conversion systems?
    Reiser, J.; Rieth, M.; Möslang, A.; Hoffmann, J.; Franke, P.; Klimenkov, M.; Knabl, W.; Hoffmann, A.; Mrotzek, T.; Roberts, S.; Armstrong, D. E. J.; Yi, X.; Pippan, R.; Wurster, S.
    2013. Fraunhofer Seminar, Freiburg, 8.November 2013
  2025. ODS steels and their behavior under neutron irradiation
    Möslang, A.
    2013. Monaco International Fusion Energy Days (MIFED 2013), Monaco, MC, December 2-4, 2013
  2026. Ductilisation of W: Synthesis, analyses and characterization of W-laminates made of W-foils
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2013. 18th Plansee Seminar, Reutte, A, June 3-7, 2013
  2027. Wolfram-Laminatwerkstoffe
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, J.; Baumgärtner, S.; Jäntsch, U.; Klimenkov, M.; Ziegler, R.; Bohlich, D.; Hoffmann, M.; Leiste, H.; Weingärtner, T.; Nemeth, A.; Scherbarth, J.; Möslang, A.; Franke, P.; Antusch, S.; Armstrong, D. E. J.; Yi, X.; Mrotzek, T.; Hoffmann, A.
    2013. 19.Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 3.-5.Juli 2013. Hrsg.: A. Wanner. Tagungsband, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
  2028. Phases in the Al-corner of the Al-Mn-Be system
    Zupanic, F.; Markoli, B.; Naglic, I.; Weingärtner, T.; Meden, A.; Boncina, T.
    2013. Microscopy and microanalysis, 19, 1308–1316. doi:10.1017/S1431927613001852
  2029. W-laminates for structural divertor applications: W-Ti laminates
    Rieth, M.; Commin, L.; Dafferner, B.; Heger, S.; Baumgärtner, S.; Ziegler, R.
    2013. Fusion Materials Topical Group Monitoring Meeting, Bucuresti, R, July 1-2, 2013
  2030. On the use of W-Cu laminate pipes as a heat sink
    Rieth, M.; Commin, L.; Hoffmann, J.; Dafferner, B.; Heger, S.; Baumgärtner, S.
    2013. Fusion Materials Topical Group Monitoring Meeting, Bucuresti, R, July 1-2, 2013
  2031. Development of a reduced activation (austenitic) stainless steel (RASS)
    Rieth, M.; Commin, L.; Hoffmann, J.; Antusch, S.
    2013. Fusion Materials Topical Group Monitoring Meeting, Garching, February 21-22, 2013
  2032. Power plant divertor. Design options and materials
    Rieth, M.
    2013. NFRI/KIT Cooperation Meeting, Karlsruhe, February 14-15, 2013
  2033. Divertor design and Materials
    Rieth, M.
    2013. Doctoral Training Network Course ’Materials in Fusion’, Oxford, November 11-15, 2013
  2034. Tungsten - an overview of production, basic properties, processing and applications
    Armstrong, D.; Hoffmann, A.; Knabl, W.; Schulmeyer, W.; Traxler, H.; Antusch, S.; Commin, L.; Krauss, W.; Nemeth, A.; Reiser, J.
    2013. Workshop on Tungsten for Nuclear Applications, Oxford, GB, September 23-25, 2013
  2035. High-alloyed steels. Structure, phases, properties, and applications
    Rieth, M.; Möslang, A.; Jäntsch, U.
    2013. Bereichsseminar ’Plasmarand und Wand’, IPP Garching, 10.April 2013
  2036. Possible applications of tungsten materials in power production and future large-scale projects
    Rieth, M.; Reiser, J.; Hoffmann, A.; Knabi, W.; Schulmeyer, W.; Commin, L.; Antusch, S.
    2013. 18th Plansee Seminar, Reutte, A, June 3-7, 2013
  2037. Phase formation and microstructure evolution of reactively r.f. magnetron sputtered Cr-Zr oxynidride thin films
    Spitz, S.; Stueber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2013. Surface and coatings technology, 237, 149–157. doi:10.1016/j.surfcoat.2013.08.034
  2038. TEM characterization of beryllium pebbles after neutron-irradiation up to 3000 appm of helium production (HIDOBE-01)
    Klimenkov, M.; Chakin, V.; Möslang, A.; Rolli, R.
    2013. 11th IEA International Workshop on Beryllium Technology (BeWS 2013), Barcelona, E, September 12-13, 2013
  2039. TEM study of neutron irradiated beryllium pebbles
    Klimenkov, M.; Chakin, V.; Möslang, A.; Rolli, R.
    2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013
  2040. TEM characterizaion of neutron irradiated defects in EUROFERS97
    Klimenkov, M.; Möslang, A.; Lindau, R.; Coppola, R.
    2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013 Abstract on USB-Stick
  2041. TEM study of beryllium pebbles after neutron irradiation up to 3000 appm helium production
    Klimenkov, M.; Chakin, V.; Möslang, A.; Rolli, R.
    2013. Journal of Nuclear Materials, 443, 409–416. doi:10.1016/j.jnucmat.2013.07.050
  2042. Characteristics of microstructure, swelling and mechanical behaviour of titanium beryllide samples after high-dose neutron irradiation at 740 and 873 K
    Kurinskiy, P.; Moeslang, A.; Chakin, V.; Klimenko, M.; Rolli, R.; Til, S. van; Goraieb, A. A.
    2013. Fusion Engineering and Design, 88, 2198–2201. doi:10.1016/j.fusengdes.2013.05.084
  2043. Characterization of constrained beryllium pebble beds after neutron irradiation at HFR at high temperatures up to helium production of 3000 appm
    Chakin, V.; Rolli, R.; Moeslang, A.; Vladimirov, P.; Kurinskiy, P.; Til, S. van; Magielsen, A. J.; Zmitko, M.
    2013. Fusion Engineering and Design, 88, 2309–2313. doi:10.1016/j.fusengdes.2013.04.034
  2044. Investigating the effect of surface topography on hydrophobicity and bacterial attachment of polystyrene
    Mohamad, A. J.; Zhu, X.; Wellington, E. M. H.; Pfleging, W.; Liu, X.
    2013. 11th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII), Aachen, July 1-5, 2013
  2045. Laser micro processing of polymeric devices - structuring, surface modification and bonding
    Kohler, R.; Proell, J.; Besser, H.; Torge, M.; Seifert, H. J.; Pfleging, W.
    2013. International Laser Applications Symposium 2013, Nottingham, GB, March 12-13, 2013
  2046. Investigation of Li-ion diffusion rates using GITT in cells with 3D structured intercalation cathode materials
    Gotcu-Freis, P.; Seifert, H. J.; Pfleging, W.
    2013. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, E, September 8-13, 2013
  2047. Surface modification of LiFePO₄ cathode materials using ultrafast laser radiation
    Mangang, M.; Seifert, H. J.; Pfleging, W.
    2013. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, E, September 8-13, 2013
  2048. Strukturierung von LiFePO₄ mittels Ultrakurzpulslaserstrahlung. bachelor’s thesis
    Tarde, C.
    2013. Bachelorarbeit, Karlsruher Institut für Technologie 2013
  2049. Thin film passivation of laser generated 3D micro patterns in lithium manganese oxide cathodes
    Pröll, J.; Kohler, R.; Bruns, M.; Oberst, V.; Weidler, P. G.; Heißler, S.; Kübel, C.; Scherer, T.; Prang, R.; Seifert, H. J.; Pfleging, W.
    2013. Laser-based Micro- and Nanopackaging and Assembly VII: Proceedings of Photonics West, San Francisco, CA, February 6-7, 2013. Hrsg.: U. Klotzbach, 860807/1–10, Society of Photo-optical Instrumentation Engineers (SPIE)
  2050. Laser-induced self-organizing surface structures on cathode materials for lithium-ion batteries
    Kohler, R.; Pröll, J.; Bruns, M.; Scherer, T.; Seifert, H. J.; Pfleging, W.
    2013. Laser-based Micro- and Nanopackaging and Assembly VII : Proceedings of Photonics West 2013, San Francisco, CA, February 6-7, 2013. Hrsg.: U. Klotzbach, 860806/1–6, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2006372
  2051. Antiferromagnetism in UO₂ thin epitaxial films
    Bao, Z.; Springell, R.; Walker, H. C.; Leiste, H.; Kübel, K.; Prang, R.; Nisbet, G.; Langridge, S.; Ward, R. C. C.; Gouder, T.; Caciuffo, R.; Lander, G. H.
    2013. Physical review / B, 88, 134426/1–10. doi:10.1103/PhysRevB.88.134426
  2052. On the structure-property correlation and the evolution of Nanofeatures in 12-13.5% Cr oxide dispersion strengthened ferritic steels. PhD dissertation
    He, P.
    2013. KIT Scientific Publishing. doi:10.5445/KSP/1000037337
  2053. The ITER EC H&CD upper launcher: Analysis of vertical remote handling applied to the BSM maintenance
    Grossetti, G.; Aiello, G.; Heemskerk, C.; Elzendoorn, B.; Geßner, R.; Koning, J.; Meier, A.; Ronden, D.; Späh, P.; Scherer, T.; Schreck, S.; Strauß, D.; Vaccaro, A.
    2013. Fusion Engineering and Design, 88, 1929–1933. doi:10.1016/j.fusengdes.2013.05.005
  2054. Preliminary design of the ITER ECH upper launcher
    Strauss, D.; Aiello, G.; Chavan, R.; Cirant, S.; Baar, M. de; Farina, D.; Gantenbein, G.; Goodman, T.; Henderson, M. A.; Kasparek, W.; Kleefeldt, K.; Landis, J. D.; Meier, A.; Moro, A.; Platania, P.; Plaum, B.; Poli, E.; Ramponi, G.; Ronden, D.; Saibene, G.; Sanchez, F.; Sauter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Vaccaro, A.; Zohm, H.
    2013. Fusion Engineering and Design, 88, 2761–2766. doi:10.1016/j.fusengdes.2013.03.040
  2055. The ITER EC H&CD upper launcher: structural system
    Spaeh, P.; Aiello, G.; Gessner, R.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Serikov, A.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2013. Fusion Engineering and Design, 88, 878–881. doi:10.1016/j.fusengdes.2013.02.103
  2056. The ITER EC H&CD upper launcher: design, analysis and testing of a bolted joint for the blanket shield module
    Gessner, R.; Aiello, G.; Grossetti, G.; Meier, A.; Ronden, D.; Spaeh, P.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.
    2013. Fusion Engineering and Design, 88, 1881–1885. doi:10.1016/j.fusengdes.2013.01.090
  2057. The ITER EC H&CD upper launcher: EM disruption analysis
    Vaccaro, A.; Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Späh, P.; Strauß, D.; Saibene, G.; Cavinato, M.
    2013. Fusion Engineering and Design, 88, 1042–1045. doi:10.1016/j.fusengdes.2013.01.058
  2058. The ITER EC H&CD upper launcher: Maintenance concepts
    Ronden, D. M. S.; Baar, M. de; Chavan, R.; Elzendoorn, B. S. Q.; Grossetti, G.; Heemskerk, C. J. M.; Koning, J. F.; Landis, J. D.; Spaeh, P.; Strauss, D.
    2013. Fusion Engineering and Design, 88, 1982–1986. doi:10.1016/j.fusengdes.2012.12.031
  2059. Fatigue-structure correlation of 13.5%Cr ODS steels at 550⁰C for fusion application
    He, P.; Klimenkov, M.; Möslang, A.; Lindau, R.
    2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013
  2060. Neue Werkstoffe für die Solarenergiewandlung: Design, Produktion und Applikation
    Hoffmann, J.; Möslang, A.; Reiser, J.; Rieth, M.
    2013. Impulse für die Zukunft der Energie : 2.Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 13.Juni 2013
  2061. Fabrication and characterization of Al-containing ferritic ODS alloys for improved corrosion resistance
    Hoffmann, J.; Rieth, M.; Lorenz, M.; Möslang, A.
    2013. International Conference on Fast Reactors and Related Fuel Cycles, Safe Technologies and Sustainable Scenarios, Paris, F, March 4-7, 2013
  2062. Systematic XAFS investigations of the structural evolution of ytrrium-enriched oxides in ODS ferritic steels by advanced synchrotron source at ESRF
    He, P.; Liu, T.; Moeslang, A.; Nikitenko, S.
    2013. GETMAT International Workshop, Berlin, September 17-19, 2013
  2063. Progress of the ITER EC H&CD upper launcher
    Strauss, D.; Aiello, G.; Bruschi, A.; Chavan, R.; Farina, D.; Figini, L.; Gagliardi, M.; Garcia, V.; Goodman, T. P.; Grossetti, G.; Heemskerk, C.; Henderson, M. A.; Kasparek, W.; Krause, A.; Landis, J. D.; Meier, A.; Moro, A.; Platania, P.; Plaum, B.; Poli, E.; Ronden, D.; Saibene, G.; Sanchez, F.; Sauter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Vaccaro, A.; Weinhorst, B.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  2064. ITER EC H&D upper launcher: Design options and remote handling issues of the waveguide assembly
    Grossetti, G.; Aiello, G.; Chavan, R.; Geßner, R.; Goodman, T.; Heemskerk, C.; Meier, A.; Ronden, D.; Scherer, T.; Späh, P.; Schreck, S.; Strauß, D.; Vaccaro, A.; Oosterhout, J. van
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  2065. Prototyping of the blanket shield module for the ITER EC H&CD upper launcher
    Spaeh, P.; Aiello, G.; Binni, A.; Gessner, R.; Goldman, A.; Grossetti, G.; Kroiss, A.; Meier, A.; Obermeier, C.; Scherer, T.; Strauss, D.; Vaccaro, A.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  2066. Validation of the production of ODS alloys by extended x-ray absorption fine structure (EXAFS)
    Hoffmann, J.; Möslang, A.; He, P.; Rieth, M.
    2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013
  2067. Basic studies on processing of a large scale ODS batch
    Hoffmann, J.; Antusch, S.; Dafferner, B.; Commin, L.; Jäntsch, U.; Rieth, M.; Ziegler, R.
    2013. International Workshop on Structural Materials for Innovative Nuclear Systems, Idaho Falls, Idaho, October 7-10, 2013
  2068. Al-containing ferritic oxide dispersion strengthened alloys. Production, microstructure, mechanical properties and oxidation
    Hoffmann, J.; Rieth, M.; Möslang, A.
    2013. GETMAT International Workshop, Berlin, September 17-19, 2013
  2069. Al-containing ferritic oxide dispersion strengthened alloys. Production, microstructure, mechanical properties and oxidation
    Hoffmann, J.; Rieth, M.; Möslang, A.
    2013. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, E, September 8-13, 2013
  2070. Al-containing ferritic oxide dispersion strengthened alloys
    Hoffmann, J.; Rieth, M.; Möslang, A.
    2013. 2nd International Conference on Materials for Energy (EnMat 2013), Karlsruhe, 12.-16. Mai 2013
  2071. The influence of thermomechanical processing on the microstructure and mechanical properties of 13.5Cr ODS steels
    He, P.; Lindau, R.; Möeslang, A.; Sandim, H. R. Z.
    2013. Fusion Engineering and Design, 88, 2448–2452. doi:10.1016/j.fusengdes.2013.04.005
  2072. On the structure-property correlation and the evolution of Nanofeatures in 12-13.5% Cr oxide dispersion strengthened ferritic steels. PhD dissertation
    He, P.
    2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000037231
  2073. The Cu-Sn phase diagram. Part II: New thermodynamic assessment
    Li, D.; Franke, P.; Fürtauer, S.; Cupid, D.; Flandorfer, H.
    2013. Intermetallics, 34, 148–158. doi:10.1016/j.intermet.2012.10.010
  2074. The Cu-Sn phase diagram. Part I: New experimental results
    Fürtauer, S.; Li, D.; Cupid, D.; Flandorfer, H.
    2013. Intermetallics, 34, 142–147. doi:10.1016/j.intermet.2012.10.004
  2075. Comparative studies of laser annealing technique and furnace annealing by X-ray diffraction and Raman analysis of lithium manganese oxide thin films for lithium-ion batteries
    Pröll, J.; Weidler, P. G.; Kohler, R.; Mangang, A.; Heißler, S.; Seifert, H. J.; Pfleging, W.
    2013. Thin solid films, 531, 160–171. doi:10.1016/j.tsf.2013.01.015
  2076. Liquid phase formation in the system AIN-Al₂O₃-Y₂O₃. Part I: Experimental investigations
    Neher, R.; Herrmann, M.; Fabrichnaya, O.; Pavlyuchkov, D.; Seifert, H. J.
    2013. Journal of the European Ceramic Society, 33, 2447–2455. doi:10.1016/j.jeurceramsoc.2013.04.028
  2077. Modification of enamel and dentin surfaces by non-thermal atmospheric plasma
    Lehmann, A.; Rueppell, A.; Schindler, A.; Zylla, I. M.; Seifert, H. J.; Nothdurft, F.; Hannig, M.; Rupf, S.
    2013. Plasma Processes and Polymers, 10, 262–270. doi:10.1002/ppap.201200088
  2078. Phase equilibria at 1473 K in the ternary Al-Cr-Ti system
    Kriegel, M. J.; Pavlyuchkov, D.; Cupid, D. M.; Fabrichnaya, O.; Heger, D.; Rafaja, D.; Seifert, H. J.
    2013. Journal of Alloys and Compounds, 550, 519–525. doi:10.1016/j.jallcom.2012.10.123
  2079. Liquid phase formation in the system Al₂O₃-Y₂O₃-AIN: Part II. Thermodynamic assessment
    Fabrichnaya, O.; Pavlyuchkov, D.; Neher, R.; Herrmann, M.; Seifert, H. J.
    2013. Journal of the European Ceramic Society, 33, 2457–2463. doi:10.1016/j.jeurceramsoc.2013.05.004
  2080. Investigation of the lithium-rich boundary of the Li₁₊ₓMn₂₋ₓO₄ cubic spinel phase in air
    Cupid, D. M.; Lehmann, T.; Bergfeldt, T.; Berndt, H.; Seifert, H. J.
    2013. Journal of materials science, 48 (9), 3395–3403. doi:10.1007/s10853-012-7126-3
  2081. Ductilisation of W: Synthesis, analyses and characterizaton of W-laminates made of W-foils
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2013. 18th Plansee Seminar, Reutte, A, June 3-7, 2013
  2082. Neutron imaging investigations of the hydrogen related degradation of the mechanical properties of zircaloy-4 cladding tubes
    Grosse, M.; Valance, S.; Stuckert, J.; Steinbrück, M.; Walter, M.; Kaestner, A.; Hartmann, S.; Santisteban, J.
    2013. Advanced Materials Exploration with Neutrons and Synchrotron X-Rays : Proceedings of Symposium VV of MRS Fall Meeting 2012, Boston, MA., November 25-30, 2012, 89–94, MRS. doi:10.1557/opl.2013.364
  2083. A brief summary of the progress on the EFDA tungsten materials
    Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.; Aktaa, J.; Ahlgren, T.; Antusch, S.; Armstrong, D. E. J.; Balden, M.; Baluc, N.; Barthe, M. F.; Basuki, W. W.; Battabyal, M.; Becquart, C. S.; Blagoeva, D.; Boldyryeva, H.; Brinkmann, J.; Celino, M.; Ciupinski, L.; Correia, J. B.; Backer, A. de; Domain, C.; Gaganidze, E.; Garcia-Rosales, C.; Gibson, J.; Gilbert, M. R.; Giusepponi, S.; Gludovatz, B.; Greuner, H.; Heinola, K.; Höschen, T.; Hoffmann, A.; Holstein, N.; Koch, F.; Krauss, W.; Li, H.; Lindig, S.; Linke, J.; Linsmeier, C.; Lopez-Ruiz, P.; Maier, H.; Matejicek, J.; Mishra, T. P.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Opschoor, J.; Ordas, N.; Palacios, T.; Pintsuk, G.; Pippan, R.; Reiser, J.; Riesch, J.; Roberts, S. G.; Romaner, L.; Rosinski, M.; Sanchez, M.; Schulmeyer, W.; Traxler, H.; Urena, A.; Laan, J. G. van der; Veleva, L.; Wahlberg, S.; Walter, M.; Weber, T.; Weitkamp, T.; Wurster, S.; Yar, M. A.; You, J. H.; Zivelonghi, A.
    2013. Journal of Nuclear Materials / Supplement 1, 442 (1-3), S173-S180. doi:10.1016/j.jnucmat.2013.03.062
  2084. Assessment of copper based materials fr the water-cooled divertor concept of the DEMO European fusion reactor
    Commin, L.; Antusch, S.; Baumgärtner, S.; Goldacker, W.; Lukits, P.; Rieth, M.; Bolich, D.; Hoffmann, M.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, CA, June 10-14, 2013, Article no 6635275, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOFE.2013.6635275
  2085. Work package No.1: Irradiation damage - advanced characterization and modeling, FabriCharMe
    Commin, L.
    2013. GOT Program Progress Meeting, Warszawa, PL, July 15, 2013
  2086. Multicomponent powder injection molding as method for mass production, joining, and material development for tungsten armour materials
    Antusch, S.; Armstrong, D. E. J.; Britton, T. B.; Commin, L.; Gibson, J. S. K. L.; Greuner, H.; Hoffmann, J.; Knabl, W.; Müller, M.; Pintsuk, G.; Piotter, V.; Reiser, J.; Rieth, M.; Roberts, S. G.; Weingaertner, T.
    2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013
  2087. Creep-fatigue interaction in Eurofer 3 electron beam welds
    Commin, L.; Baumgärtner, S.; Dafferner, B.; Heger, S.; Rieth, M.; Möslang, A.
    2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013
  2088. Assessment of copper based materials for the water-cooled divertor concept of the DEMO European fusion reactor
    Commin, L.; Antusch, S.; Baumgärtner, S.; Goldacker, W.; Lukits, P.; Rieth, M.; Bolich, D.; Hoffmann, M.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  2089. Synthesis and electrochemical performance of nanocrystalline Al₀̣₄Mg₀̣₂Sn₀̣₄O₁̣₆ and Al₀̣₂₅Mg₀̣₃₈Sn₀̣₃₈O₁̣₅ investigated by in situ XRD, ²⁷Al/¹¹⁹Sn MAS NMR, ¹¹⁹Sn Mössbauer spectroscopy, and galvanostatic cycling
    Issac, I.; Heinzmann, R.; Kaus, M.; Zhao-Karger, Z.; Gesswein, H.; Bergfeldt, T.; Chakravadhanula, V. S. K.; Kübel, C.; Hahn, H.; Indris, S.
    2013. Journal of materials chemistry / A, 1, 13842–13852. doi:10.1039/C3TA12805A
  2090. A fail-safe and cost effective fabrication route for blanket first walls
    Commin, L.; Rieth, M.; Dafferner, B.; Zimmermann, H.; Bolich, D.; Baumgärtner, S.; Ziegler, R.; Dichiser, S.; Fabry, T.; Fischer, S.; Hildebrand, W.; Palussek, O.; Ritz, H.; Sponda, A.
    2013. Journal of Nuclear Materials, 442, 538–541. doi:10.1016/j.jnucmat.2013.07.043
  2091. Evaluation of irradiation facility options for fusion materials research and development
    Zinkle, S. J.; Möslang, A.
    2013. Fusion Engineering and Design, 88, 472–482. doi:10.1016/j.fusengdes.2013.02.081
  2092. Multimodal options for materials research to advance the basis for fusion energy in the ITER era
    Zinkle, S. J.; Möslang, A.; Muroga, T.; Tanigawa, H.
    2013. Nuclear Fusion, 53, 104024/1–13. doi:10.1088/0029-5515/53/10/104024
  2093. High-temperature thin-film calorimetry: a newly developed method applied to lithium ion battery materials
    Wulfmeier, H.; Albrecht, D.; Ivanov, S.; Fischer, J.; Ulrich, S.; Bund, A.; Fritze, H.
    2013. Journal of Materials Science, 48, 6585–6596. doi:10.1007/s10853-013-7455-x
  2094. Functionally graded vacuum plasma sprayed and magnetron sputtered tungsten/EUROFER97 interlayers for joints in helium-cooled divertor components
    Weber, T.; Stüber, M.; Ulrich, S.; Vaßen, R.; Basuki, W. W.; Lohmiller, J.; Sittel, W.; Aktaa, J.
    2013. Journal of Nuclear Materials, 436, 29–39. doi:10.1016/j.jnucmat.2013.01.286
  2095. Composition-dependent structure of polycrystalline magnetron-sputtered V-Al-C-N hard coatings studied by XRD, XPS, XANES and EXAFS
    Krause, B.; Darma, S.; Kaufholz, M.; Mangold, S.; Doyle, S.; Ulrich, S.; Leiste, H.; Stüber, M.; Baumbach, T.
    2013. Journal of applied crystallography, 46 (4), 1064–1075. doi:10.1107/S0021889813014477
  2096. Thermodynamic description of the layered O3 and O2 structural LiCoO₂-CoO₂ pseudo-binary systems
    Chang, K.; Hallstedt, B.; Music, D.; Fischer, J.; Ziebert, C.; Ulrich, S.; Seifert, H. J.
    2013. CALPHAD: Computer Coupling of phase Diagrams and Thermochemistry, 41, 6–15. doi:10.1016/j.calphad.2013.01.001
  2097. DEMO - initiation of remote maintenance requirements
    Mittwollen, M.; Madzharov, V.; Kubaschewski, M.; Boccaccini, L. V.; Grossetti, G.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  2098. Status, progress and future plans of EC RF source development at KIT
    Jelonnek, J.; Avramidis, K. A.; Franck, J.; Gantenbein, G.; Hesch, K.; Illy, S.; Pagonakis, I.; Rzesnicki, T.; Samartsev, A.; Scherer, T.; Schlaich, A.; Schmid, A.; Strauss, D.; Thumm, M.; Zhang, J.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013
  2099. DEMO - initiation of remote maintenance requirements
    Mittwollen, M.; Madzharov, V.; Kubaschewski, M.; Boccaccini, L. V.; Grossetti, G.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, CA, June 10-14, 2013, Article no 6635472, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOFE.2013.6635472
  2100. Thermodynamic aspects of copper oxides and iron oxides used as conversion electrodes for lithium ion batteries
    Lepple, M.; Cupid, D. M.; Franke, P.; Reif, A.; Seifert, H. J.
    2013. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, E, September 8-13, 2013
  2101. The ITER ECH & CD upper launcher: Steps towards final design of the first confinement system
    Spaeh, P.; Aiello, G.; Bertizzolo, R.; Chavan, R.; Gessner, R.; Goodman, T.; Grossetti, G.; Henderson, M.; Krause, A.; Landis, J. D.; Meier, A.; Ronden, D.; Saibene, G.; Scherer, T.; Schreck, S.; Serikov, A.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013 Pisacataway, N.J. : IEEE, 2013. doi:10.1109/SOFE.2013.6635321
  2102. DEMO: Heating and current drive system integration with blanket system
    Grossetti, G.; Harman, J.; Mittwollen, M.; Poli, E.; Scherer, T.; Späh, P.; Strauß, D.; Vaccaro, A.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, CA, June 10-14, 2013, Article no 6635329, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOFE.2013.6635329
  2103. The ITER EC-H&CD upper launcher: FEM analysis of the blanket shield with respect to surface and nuclear heat loads
    Vaccaro, A.; Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Späh, P.; Strauß, D.; Serikov, A.; Weinhorst, B.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013, Article no 6635394, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOFE.2013.6635394
  2104. Charpy impact properties of pure tungsten plate material in as-received and recrystallized condition (1 h at 2000⁰C (2273 K))
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2013. Journal of Nuclear Materials / Supplement 1, 442 (1-3), S204-S207. doi:10.1016/j.jnucmat.2012.10.037
  2105. Characterization of ODS (Oxide Dispersion Strengthened)Eurofer/Eurofer dissimilar electron beam welds
    Commin, L.; Rieth, M.; Widak, V.; Dafferner, B.; Heger, S.; Zimmermann, H.; Materna-Morris, E.; Lindau, R.
    2013. Journal of Nuclear Materials / Supplement 1, 442 (1-3), S552-S556. doi:10.1016/j.jnucmat.2012.11.019
  2106. New LIGA2.X process for the industrial fabrication of single of mold inserts and polymeric microparts
    Heneka, J.; Guttmann, M.; Hanemann, T.; Plewa, K.; Saile, V.
    2013. Von Bauelementen zu Systemen : MikroSystemTechnik Kongress 2013, Aachen, 14.-16.Oktober 2013
  2107. A new fully automatic PIM tool to replicate two component tungsten DEMO divertor parts
    Antusch, S.; Commin, L.; Heneka, J.; Piotter, V.; Plewa, K.; Walter, H.
    2013. Fusion engineering and design, 88, 2461–2465. doi:10.1016/j.fusengdes.2013.04.037
  2108. Candidate materials for DEMO - Uncertainties and strategies to close knowledge gaps
    Möslang, A.; Diegele, E.; Ibarra, A.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  2109. ToF-SIMS and XPS characterization of R.F. magnetron sputtered Li-Mn-O thin films for Li-ion batteries
    Bruns, M.; Fischer, J.; Ehrenberg, H.; Seifert, H. J.; Ulrich, S.
    2013. 15th European Conference on Applications of Surface and Interface Analysis (ECASIA 2013), Cagliari, I, October 13-18, 2013
  2110. High-frequency permeability changes in Fe-Co-Hf-N/Ti-N multilayer coatings for mechanical stress characterization
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.
    2013. Joint European Magnetic Symposium (JEMS 2013), Rhodos, GR, August 25-30, 2013
  2111. Fe-Co-Hf-N/Ti-N multilayer coatings with functional properties for high frequency sensor applications
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.
    2013. Euro Intelligent Materials 2013, Kiel, September 25-27, 2013
  2112. Tritium release retention properties of highly neutron-irradiated beryllium pebbles from HIDOBE-01 experiment
    Chakin, V.; Rolli, R.; Moeslang, A.; Klimenkov, M.; Kolb, M.; Vladimirov, P.; Kurinskiy, P.; Schneider, H. C.; Til, S. van; Magielsen, A. J.; Zmitko, M.
    2013. Journal of Nuclear Materials, 442 (Suppl. 1), S483-S489. doi:10.1016/j.jnucmat.2013.03.032
  2113. First measurments of beryllide vapor pressures
    Reimann, J.; Beres, O.; Colle, J. Y.; Dorn, C.; Harsch, H.; Koenigs, R.; Kurinsky, P.
    2013. Proceedings of the 10th IEA International Workshop on Beryllium Technology KIT Scientific Reports, KIT-SR 7650 (September 2013), 258–262
  2114. Synthesis, microstructure and properties of Cr-based mixed oxide thin films using reactive r.f. magnetron sputtering
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2013. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, E, September 8-13, 2013
  2115. Engineering principles for structural components of EC heating and current drive systems
    Späh, P.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 Book of Abstracts T29
  2116. The ITER ECRH upper launcher and an outlook to DEMO
    Strauss, D.; Aiello, G.; Brusci, A.; Chavan, R.; Farina, D.; Finigi, L.; Goodman, T. P.; Grossetti, G.; Henderson, M. A.; Kasparek, W.; Koning, J.; Landis, J. D.; Meier, A.; Moro, A.; Plaum, B.; Poli, E.; Ronden, D.; Saibene, G.; Sanchez, F.; Sautter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Vaccaro, A.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 Book of Abstracts T26
  2117. FEM analyses of the blanket shield module with respect to surface and nuclear heat loads
    Vaccaro, A.; Aiello, G.; Scherer, T.; Spaeh, P.; Strauss, D.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 Book of Abstracts T25
  2118. Recent developments in the design of the actual ITER CVD diamond torus window assembly
    Scherer, T. A.; Strauss, D.; Meier, A.; Aiello, G.; Gessner, R.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 Book of Abstracts T22
  2119. Seismic analysis of the CVD diamond window unit for the ITER EC H&CD upper launcher
    Aiello, G.; Meier, A.; Scherer, T.; Strauss, D.; Vaccaro, A.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 Book of Abstracts T27
  2120. Thermal stability of the ferromagnetic in-plane uniaxial anisotropy of Fe-Co-Hf-N/Ti-N multilayer films for high-frequency sensor applications
    Krüger, K.; Thede, C.; Seemann, K.; Leiste, H.; Stüber, M.; Quandt, E.
    2013. IEEE transactions on magnetics, 49, 3870–3873. doi:10.1109/TMAG.2013.2243707
  2121. Proceedings of the 10th IEA International Workshop on Beryllium Technology, September 19 - 21, 2012, Karlsruhe, Germany (KIT Scientific Reports ; 7650)
    Vladimirov, P.; Reimann, J. (Eds.)
    2013. KIT Scientific Publishing. doi:10.5445/KSP/1000036313
  2122. Status of the ITER EC H&CD system
    Gandini, F.; Albajar, F.; Alberti, S.; Avramidis, K.; Baruah, U.; Bigelow, T.; Bonicelli, T.; Bruschi, A.; Chavan, R.; Cismondi, F.; Darbos, C.; Denisov, G.; Dumur, A.; Farina, D.; Gantenbein, G.; Gassman, T.; Goodman, T. P.; Hanson, G.; Hogge, J. P.; Jean, O.; Jelonnek, J.; Kajiwara, K.; Kasparek, W.; Kobayashi, N.; Kushwah, M.; Latsas, G. P.; Moro, A.; Nazare, C.; Oda, Y.; Omori, T.; Oustinov, A.; Pagonakis, I.; Piosczyk, B.; Popov, L.; Rao, S. L.; Rasmussen, D.; Ronden, D.; Saibene, G.; Sakamoto, K.; Scherer, T.; Shapiro, M.; Singh, N. P.; Sozzi, C.; Spaeh, P.; Straus, D.; Sauter, O.; Takahashi, K.; Temkin, R.; Zohm, H.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013
  2123. The ASDEX upgrade multi-frequency ECRH system status and plans
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Schubert, M.; Schütz, H.; Zohm, H.; Jelonnek, J.; Thumm, M.; Scherer, T.; Strauss, D.; Gantenbein, G.; Kasparek, W.; Plaum, B.; Lechte, C.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013
  2124. Functionally graded tungsten/EUROFER97 interlayers for joints in helium-cooled divertor components
    Weber, T.; Aktaa, J.; Basuki, W. W.; Stüber, M.; Ulrich, S.; Vaßen, R.; Zhou, Z.; Qu, D.
    2013. 14th Internat.Conf.on Plasma-Facing Materials and Components for Fusion Applications, Jülich, May 13-17, 2013
  2125. Analysis of electromagnetic loads on EU-DEMO inboard and outboard blanket vertical segments
    Maione, I. A.; Vaccaro, A.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  2126. Parametric analysis of EM loads acting on DEMO vertical segments with respect to module’s dimension
    Maione, I. A.; Vaccaro, A.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  2127. Neutron radiograhy and tomography investigations of the secondary hydriding of zircaloy-4 during simulated loss of coolant nuclear accidents
    Grosse, M. K.; Stuckert, J.; Steinbrück, M.; Kaestner, A. P.; Hartmann, S.
    2013. Physics Procedia, 43, 294–306. doi:10.1016/j.phpro.2013.03.035
  2128. Measurement and modeling of the hydrogen distribution in nuclear fuel claddings after loss of coolant accidents
    Grosse, M.; Stuckert, J.; Steinbrück, M.; Kaestner, A.
    2013. International Conference on Neutron Scattering (ICNS 2013), Edinburgh, GB, July 8-12, 2013
  2129. Ferromagnetic resonance frequency increase and resonance line broadening of a ferromagnetic Fe-Co-Hf-N film with in-plane uniaxial anisotropy by high-frequency field perturbation
    Seemann, K.; Leiste, H.; Krüger, K.
    2013. Journal of Magnetism and Magnetic Materials, 345, 36–40. doi:10.1016/j.jmmm.2013.06.003
  2130. Verbesserung der elektrochemischen Performance von Lithium-Ionen-Zellen durch Lasermodifikation von Elektrodenmaterialien
    Mangang, M.; Kohler, R.; Pröll, J.; Seifert, H. J.; Pfleging, W.
    2013. Impulse für die Zukunft der Energie : 2.Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 13.Juni 2013
  2131. Wolfram-Laminatwerkstoffe
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, J.; Baumgärtner, S.; Jäntsch, U.; Klimenkov, M.; Ziegler, R.; Bohlich, D.; Hoffmann, M.; Leiste, H.; Weingärtner, T.; Nemeth, A.; Scherbarth, J.; Möslang, A.; Franke, P.; Antusch, S.; Armstrong, D. E. J.; Yi, X.; Mrotzek, T.; Hoffmann, A.
    2013. 19.Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 3.-5.Juli 2013
  2132. Tungsten foil laminate for structural divertor applications. Joining of tungsten foils
    Reiser, J.; Rieth, M.; Möslang, A.; Dafferner, B.; Hoffmann, J.; Mrotzek, T.; Hoffmann, A.; Armstrong, D. E. J.; Yi, X.
    2013. Journal of Nuclear Materials, 436, 47–55. doi:10.1016/j.jnucmat.2013.01.295
  2133. Tungsten foil laminate for structural divertor applications. Tensile test properties of tungsten foil
    Reiser, J.; Rieth, M.; Möslang, A.; Dafferner, B.; Hoffmann, A.; Yi, X.; Armstrong, D. E. J.
    2013. Journal of Nuclear Materials, 434, 357–368. doi:10.1016/j.jnucmat.2012.12.003
  2134. Laser micro and nano processing of metals, ceramics, and polymers
    Pfleging, W.; Kohler, R.; Südmeyer, I.; Rohde, M.
    2013. Laser-Assisted Fabrication of Materials. Ed.: J. Majumdar, 319–374, Springer-Verlag. doi:10.1007/978-3-642-28359-8_8
  2135. Transparent thin thermoplastic biochip by injection-moulding and laser transmission welding
    Singh, A.; Pfleging, W.; Beiser, M.; Malek, C. K.
    2013. Microsystem technologies, 19 (3), 445–453. doi:10.1007/s00542-012-1666-y
  2136. Thermodynamic investigations of copper oxides used as conversion type electrodes in lithium ion batteries
    Lepple, M.; Adam, R.; Cupid, D. M.; Franke, P.; Bergfeldt, T.; Wadewitz, D.; Rafaja, D.; Seifert, H. J.
    2013. Journal of materials science, 48 (17), 5818–5826. doi:10.1007/s10853-013-7374-x
  2137. Characteristics of microstructure and tritium release properties of different kinds of beryllium pebbles for application in tritium breeding modules
    Kurinskiy, P.; Vladiirov, P.; Moeslang, A.; Rolli, R.; Zmitko, M.
    2013. Jahrestagung Kerntechnik, Berlin, 14.-16. Mai 2013
  2138. The ECRH system for ASDEX upgrade - Status and plans
    Stober, J.; Wagner, D.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Reich, M.; Schubert, M.; Schütz, H.; Treutterer, W.; Zohm, H.; Flamm, J.; Gantenbein, G.; Thumm, M.; Meier, A.; Scherer, T.; Strauß, D.; Vaccaro, A.; Höhnle, H.; Kasparek, W.; Stroth, U.; Litvak, A.; Denisov, G. G.; Chirkov, A. V.; Tai, E. M.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Soluyanova, E. A.; Malygin, S. A.
    2013. (ASDEX Upgrade Team, Ed.), 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013
  2139. Seismic analysis of the CVD diamond window unit
    Aiello, G.; Vaccaro, A.; Meier, A.; Strauss, D.; Scherer, T. A.
    2013. 25th Joint Russian-German Workshop on ECRH and Gyrotrons (2013), Karlsruhe, Germany, June 24–29, 2013
  2140. The ITER ECRH upper launcher and an outlook beyond
    Strauß, D.; Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Vaccaro, A.
    2013. 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013
  2141. The ECRH system for ASDEX upgrade. Status and plans
    Stober, J.; Wagner, D.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Reich, M.; Schubert, M.; Schütz, H.; Treutterer, W.; Zohm, H.; Flamm, J.; Gantenbein, G.; Thumm, M.; Meier, A.; Scherer, T.; Strau, D.; Vaccaro, A.; Höhnle, H.; Kasparek, W.; Stroth, U.; Litvak, A.; Denisov, G. G.; Chirkov, A. V.; Tai, E. M.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Soluyanova, E. A.; Malygin, S. A.
    2013. 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013
  2142. Recent developments in the design f the actual ITER CVD diamond torus window assembly
    Scherer, T. A.; Strauss, D.; Meier, A.; Aiello, G.; Gessner, R.
    2013. 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013
  2143. Overview of remote maintenance concepts for the ITER ECH&CD upper launcher
    Grossetti, G.; Aiello, G.; Geßner, R.; Mazzochhi, F.; Meier, A.; Scherer, T. A.; Schreck, S.; Späh, P.; Strauß, D.; Vaccaro, A.
    2013. 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013
  2144. Definition of non constant heat loads in FEM analyses: nuclear heating on the BSM
    Vaccaro, A.; Aiello, G.; Späh, P.; Scherer, T. A.; Strauss, D.
    2013. 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013
  2145. DEMO: Heating and current drive system integration with blanket system
    Grossetti, G.; Harman, J.; Mittwollen, M.; Poli, E.; Scherer, T.; Späh, P.; Strauß, D.; Vaccaro, A.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  2146. The ITER EC-H&CD upper launcher: FEM analysis of the blanket shield with respect to surface and nuclear heat loads
    Vaccaro, A.; Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Späh, P.; Strauß, D.; Serikov, A.; Weinhorst, B.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  2147. The ITER ECH & CD upper launcher: Steps towards final design of the first confinement system
    Spaeh, P.; Aiello, G.; Bertizzolo, R.; Chavan, R.; Gessner, R.; Goodman, T.; Grossetti, G.; Henderson, M.; Krause, A.; Landis, J. D.; Meier, A.; Ronden, D.; Saibene, G.; Scherer, T.; Schreck, S.; Serikov, A.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  2148. Characteristics of microstructure and tritium release properties of different kinds of beryllium pebbles for application in tritium breeding modules
    Kurinskiy, P.; Vladiirov, P.; Moeslang, A.; Rolli, R.; Zmitko, M.
    2013. Jahrestagung Kerntechnik, Berlin, 14.-16. Mai 2013, INFORUM Verlags- und Verwaltungsgesellschaft mbH
  2149. Ductilisation of W: Synthesis, analyses and characterization of W-laminates made of W-foils
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2013. 18th Plansee Seminar, Reutte, A, June 3-7, 2013
  2150. In situ control of the structure formation of magnetron sputtered Vanadium carbide coatings: periodic modulation of the microstructure
    Kaufholz, M.; Krause, B.; Kotapati, S.; Stüber, M.; Ulrich, S.; Mantilla, M.; Schneider, R.; Gerthsen, D.; Baumbach, T.
    2013. Spring Meeting of the European Materials Research Society, Strasbourg, F, May 27-31, 2013, Spring Meeting of the European Materials Research Society (2013), Strasbourg, France, May 27–31, 2013
  2151. In situ study of texture development during the growth of magnetron sputtered VC1-x thin films
    Kotapati, S.; Kaufholz, M.; Krause, B.; Doyle, S.; Mantilla, M.; Stüber, M.; Ulrich, S.; Baumbach, T.
    2013. Spring Meeting of the European Materials Research Society, Strasbourg, F, May 27-31, 2013, Spring Meeting of the European Materials Research Society (2013), Strasbourg, France, May 27–31, 2013
  2152. Operation of a step-frequency tunable gyrotron with a diamond brewster angle output window
    Gantenbein, G.; Dammertz, G.; Jelonnek, J.; Losert, M.; Samartsev, A.; Schlaich, A.; Scherer, T.; Strauss, D.; Thumm, M.; Wagner, D.
    2013. 14th IEEE International Vacuum Electronics Conference (IVEC 2013), Paris, F, May 21-23, 2013, Article no 6571030, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IVEC.2013.6571030
  2153. Study of the spatial distribution of Li and He inside steel using low energy loss spectroscopy
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2013. Enhanced Data Generated by Electrons (EDGE 2013) : Internat.EELS Workshop, St.Maxime, F, MMay 26-31, 2013 Book of Abstracts
  2154. Influence of composition and substrate temperature on microstructure and properties of magnetron sputtered Cr-Zr-O thin films
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2013. Spring Meeting of the European Materials Research Society, Strasbourg, F, May 27-31, 2013
  2155. New method for detection of Li inside He bubbles formed in B¹⁰-alloyed steel after neutron irradiation
    Klimenkov, M.; Möslang, A.; Matern-Morris, E.
    2013. Micron, 46, 51–56. doi:10.1016/j.micron.2012.12.005
  2156. Development of low loss dielectric CVD diamond window units for high power microwave transmission
    Scherer, T.; Strauss, D.
    2013. New Diamond and Nano Carbons Conference 2013 (NDNC 2013), Singapore, SGP, May 19-23, 2013
  2157. Thermodynamic aspects of copper oxides used as electrodes for lithium ion batteries
    Lepple, M.; Cupid, D. M.; Franke, P.; Reif, A.; Seifert, H. J.
    2013. 2nd International Conference on Materials for Energy (EnMat 2013), Karlsruhe, 12.-16. Mai 2013
  2158. High frequency magnetoelastic measurements on Fe-Co-Hf-N/Ti-N multilayer coatings
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.
    2013. Journal of magnetism and magnetic materials, 343, 42–48. doi:10.1016/j.jmmm.2013.04.071
  2159. Einfluss der Mahlung auf die Stabilität von Böhmit in wässrigen Suspensionen. PhD dissertation
    Meyer, A.
    2013. Fraunhofer Verlag
  2160. Advances in technologies for power exhaust solutions
    Reiser, J.; Rieth, M.; Möslang, A.; Hoffmann, A.
    2013. 21st Congress ’Materials, Interfaces, Processes: New Challenges for Future Applications’, Catania, I, May 15-17, 2013
  2161. Qualification of CVD diamond window assemblies by computer tomographical inspection
    Geßner, R.; Meier, A.; Scherer, T. A.
    2013. 38th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-RHz 2013), Mainz, September 1-6, 2013
  2162. Oxidation in steam and quenching of silicon carbide as cladding for nuclear power plants
    Avincola, V.; Große, M.; Stegmaier, U.; Steinbrück, M.
    2013. American Nuclear Society 2013 Student Conf., Boston, Mass., April 4-6, 2013
  2163. Oxidation in steam and quenching of silicon carbide as cladding for nuclear power plants
    Avincola, V.; Große, M.; Stegmaier, U.; Steinbrück, M.
    2013. American Nuclear Society 2013 Student Conference, Boston, MA, April 4-6, 2013, American Nuclear Society (ANS)
  2164. Microstructure, properties and microtribological performance of magnetron-sputtered V-C coatings
    Stüber, M.; Stoyanov, P.; Nold, E.; Dienwiebel, M.; Ulrich, S.
    2013. 40th Internat.Conf.on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Calif., April 29 - May 3, 2013
  2165. A combinatorial approach to the synthesis of Cr-Zr oxynitride thin films by reactive rf magnetron sputter deposition
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2013. 40th Internat.Conf.on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Calif., April 29 - May 3, 2013
  2166. KIT gyrotron development for future fusion applications
    Jelonnek, J.; Avramidis, K.; Franck, J.; Gantenbein, G.; Hesch, K.; Illy, S.; Jin, J.; Malygin, A.; Pagonakis, I.; Rzesnicki, T.; Samartsev, A.; Scherer, T.; Schlaich, A.; Schmid, M.; Strauss, D.; Thumm, M.; Zhang, J.
    2013. 38th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2013), Mainz, September 1-6, 2013
  2167. Thermomechanical impact of gyrotron power modulation on the collector of a 2 MW, 170 GHz gyrotron
    Illy, S.; Kahl, F.; Pagonakis, I.; Vaccaro, A.
    2013. 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013
  2168. Effects of oxide particle composition on structure property relations in reduced activation ferritic oxide dispersion strengthened steels
    Hoffmann, J.; Britton, T. B.; Armstrong, D. E. J.; Roberts, S. G.; Rieth, M.
    2013. TMS 142nd Annual Meeting & Exhibition, San Antonio, Tex., March 3-7, 2013
  2169. Microstructure formation of magnetron sputtered Cr-V-O thin films in dependance of chemical composition
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.
    2013. Frühjahrstagung DPG, Sektion Kondensierte Materie, Fachverband Metall- und Materialphysik, Regensburg, 10.-15. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), MM 19.3
  2170. Wolframlaminate für die Energiewende
    Reiser, J.; Rieth, M.; Dafferner, B.; Widak, V.; Hoffmann, A.
    2013. Chancen der Energiewende : wissenschaftliche Beiträge des KIT zur 1. Jahrestagung des KIT-Zentrums Energie, 19.06.2012. Hrsg.: W. Breh, 181–186, KIT Scientific Publishing
  2171. Operation of a step-frequency tunable gyrotron with a diamond brewster angle output window
    Gantenbein, G.; Dammertz, G.; Jelonnek, J.; Losert, M.; Samartsev, A.; Schlaich, A.; Scherer, T.; Strauss, D.; Thumm, M.; Wagner, D.
    2013. 14th IEEE International Vacuum Electronics Conference (IVEC 2013), Paris, F, May 21-23, 2013
  2172. QUENCH-LOCA program at KIT on secondary hydriding and results of the commissioning bundle test QUENCH-L0
    Stuckert, J.; Große, M.; Rössger, C.; Klimenkov, M.; Steinbrück, M.; Walter, M.
    2013. Nuclear Engineering and Design, 255, 185–201. doi:10.1016/j.nucengdes.2012.10.024
  2173. A combinatorial approach to the synthesis of novel oxide and oxinitride thin films
    Stüber, M.; Spitz, S.; Leiste, H.; Ulrich, S.
    2013. Frühjahrstagung DPG, Sektion Kondensierte Materie, Fachverband Metall und Materialphysik, Regensburg, 10.-15. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), MM 19.2
  2174. Loss reduction of dielectrics: CVD diamond
    Scherer, T.
    2013. Frühjahrstagung DPG, Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 10.-15. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), DF 8.2
  2175. First results of the QUENCH-17 bundle test on debris formation
    Stuckert, J.; Moch, J.; Rössger, C.; Steinbrück, M.; Große, M.
    2013. SARNET2: WP5-COOL Review Meeting, Fuertaventura, E, February 11-14, 2013
  2176. Results of the QUENCH-16 Bundle Experiment on Air Ingress (KIT Scientific Reports ; 7634)
    Stuckert, J.; Große, M.; Hózer, Z.; Steinbrück, M.
    2013. KIT Scientific Publishing. doi:10.5445/KSP/1000034168
  2177. The influence of boron on structural properties of martensitic 8-10% Cr-steels
    Materna-Morris, E.; Klimenkov, M.; Möslang, A.
    2013. Advanced Materials Forum IV : Proceeedings of 6th International Materials Symposium, Guimaraes, P, April 18-20, 2011. Ed.: A. M. Pinto, 877–882, Trans Tech Publ. doi:10.4028/www.scientific.net/MSF.730-732.877
  2178. Neutronic analyses for the ITER electron cyclotron-heating upper launcher
    Weinhorst, B.; Serikov, A.; Fischer, U.; Spaeh, P.; Strauss, D.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT-11), Barcelona, E, September 16-20, 2013
  2179. Salzausfällungen aus Geothermalwasser - je mehr Bewegung, desto schneller
    Canic, T.; Baur, S.; Adelhelm, C.
    2013. bbr - Sonderheft Geothermie (2013), 98–102
  2180. Thermal stability of the ferromagnetic in-plane uniaxial anisotropy of Fe-Co-Hf-N/Ti-N multilayer films for high-frequency sensor applications
    Krüger, K.; Thede, C.; Seemann, K.; Leiste, H.; Stüber, M.; Quandt, E.
    2013. 12th Joint MMM/Intermag Conf., Chicago, Ill., January 14-18, 2013
  2181. Analysis of the secondary hydrogenation during the QUENCH-LOCA bundle tests with Zry-4 claddings and its influence on the cladding embrittlement
    Große, M.; Stuckert, J.; Rössger, C.; Steinbrück, M.; Walter, M.; Kaestner, A.
    2013. 17th Internat.Symp.on Zirconium in the Nuclear Industry, Hyderabad, IND, February 3-7, 2013
  2182. Development of thin film cathodes for lithium-ion batteries in the material system Li-Mn-O by r.f. magnetron sputtering
    Fischer, J.; Adelhelm, C.; Bergfeldt, T.; Chang, K.; Ziebert, C.; Leiste, H.; Stüber, M.; Ulrich, S.; Music, D.; Hallstedt, B.; Seifert, H. J.
    2013. Thin solid films, 528, 217–223. doi:10.1016/j.tsf.2012.08.058
  2183. Superconducting titanium nitride lumped element microwave resonators
    Mayer, P.; Weides, M.; Song, F.; Probst, S.; Rotzinger, H.; Stüber, M.; Leiste, H.; Sandberg, M.; Vissers, M. R.; Kline, J. S.; Gao, J.; Pappas, D.; Ustinov, A. V.
    2013. Tagung ’Kryoelektronische Bauelemente’ (Kryo’12), Freudenstadt-Lauterbad, 30.September - 2.Oktober 2012
  2184. Status der Arbeiten im Teilprojekt 3.1 ’Bestimmung thermodynamischer Daten’
    Gotcu-Freis, P.; Markus, T.; Prill, M.; Ziebert, C.; Seifert, H. J.
    2013. 2.Statustreffen des Helmholtz Portfolios ’Elektrochemische Speicher im System - Zuverlässigkeit und Integration’, Karlsruhe, 28.Januar 2013
  2185. Recent progress in research on tungsten materials for nuclear fusion applications in Europe
    Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.; Aktaa, J.; Ahlgren, T.; Antusch, S.; Armstrong, D. E. J.; Balden, M.; Baluc, N.; Barthe, M. F.; Basuki, W. W.; Battabyal, M.; Becquart, C. S.; Blagoeva, D.; Boldyryeva, H.; Brinkmann, J.; Celino, M.; Ciupinski, L.; Correia, J. B.; Backer, A. de; Domain, C.; Gaganidze, E.; Garcia-Rosales, C.; Gibson, J.; Gilbert, M. R.; Giusepponi, S.; Gludovatz, B.; Greuner, H.; Heinola, K.; Höschen, T.; Hoffmann, A.; Holstein, N.; Koch, F.; Krauss, W.; Li, H.; Lindig, S.; Linke, J.; Linsmeier, C.; Lopez-Ruiz, P.; Maier, H.; Matejicek, J.; Mishra, T. P.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Opschoor, J.; Ordas, N.; Palacios, T.; Pintsuk, G.; Pippan, R.; Reiser, J.; Riesch, J.; Roberts, S. G.; Romaner, L.; Rosinski, M.; Sanchez, M.; Schulmeyer, W.; Traxler, H.; Urena, A.; Laan, J. G. van der; Veleva, L.; Wahlberg, S.; Walter, M.; Weber, T.; Weitkamp, T.; Wurster, S.; Yar, M. A.; You, J. H.; Zivelonghi, A.
    2013. Journal of Nuclear Materials, 432, 482–500. doi:10.1016/j.jnucmat.2012.08.018
  2186. Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
    Gorr, B.; Burk, S.; Depka, T.; Somsen, C.; Abu-Samra, H.; Christ, H.-J.; Eggeler, G.
    2012. International Journal of Materials Research, 103 (1), 24–30. doi:10.3139/146.110626
  2187. Eisbärbauten - Simulation der physikalischen Eigenschaften von textilen Wärmedämmstoffen
    Römmelt, M.; August, A.; Kneer, A.; Stegmaier, T.; Nestler, B.
    2012. Forschung aktuell, 2012, 21–24
  2188. Metallische Schäume: Aktuelle Projekte am KIT-ZBS
    August, A.
    2012. Nachwuchsakademie ’Analyse und Bewertung von Eigenspannungen auf unterschiedlichen Längenskalen’, Kassel, 23.-24.April 2012
  2189. Thermal conductivity of air filled open cell aluminum foams
    August, A.; Nestler, B.; Rölle, M.; Schmid, S.; Ettrich, J.
    2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
  2190. Computational analysis of bio inspired thermal absorber systems made of textile fabrics
    Schoof, E.; Römmelt, M.; Selzer, M.; August, A.; Nestler, B.; Kneer, A.; Stegmaier, T.
    2012. International School and Conference on Biological Materials Science, Potsdam, March 20-23, 2012
  2191. Low temperature production process for hermetic transparent implant packages
    Rheinschmitt, L.; Hahn, L.; Leiste, H.; Gengenbach, U.; Bretthauer, G.
    2012. Biomedizinische Technik, 57, 180. doi:10.1515/bmt-2012-4268
  2192. A phase-field study of large-scale dendrite fragmentation in Al-Cu
    Wesner, E.; Choudhury, A.; August, A.; Berghoff, M.; Nestler, B.
    2012. Journal of crystal growth, 359 (1), 107–121. doi:10.1016/j.jcrysgro.2012.08.036
  2193. ECRH on ASDEX Upgrade : System Status, Feed-Back Control, Plasma Physics Results
    Stober, J.; Bock, A.; Höhnle, H.; Reich, M.; Sommer, F.; Treutterer, W.; Wagner, D.; Gianone, L.; Herrmann, A.; Leuterer, F.; Monaco, F.; Marascheck, M.; Mlynek, A.; Müller, S.; Münich, M.; Poli, E.; Schubert, M.; Schütz, H.; Zohm, H.; Kasparek, W.; Stroth, U.; Meier, A.; Scherer, T.; Strauβ D.; Vaccaro, A.; Flamm, J.; Thumm, M.; Litvak, A.; Denisov, G. G.; Chirkov, A. V.; Tai, E. M.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Soluyanova, E. A.; Malygin, S. A.
    2012. The European physical journal / Web of Conferences, 32 (8), Art.Nr. 02011. doi:10.1051/epjconf/20123202011
  2194. Technology Developments at KIT Towards a Magnetic Confinement Fusion Power Plant
    Hesch, K.; Aktaa, J.; Antusch, S.; Boccaccini, L. V.; Day, C.; Demange, D.; Fietz, W. H.; Gantenbein, G.; Möslang, A.; Norajitra, P.; Rieth, M.
    2012. Transactions of Fusion Science and Technology, 61 (1T), 64–69
  2195. Ceramic breeder materials
    Laan, J. G. van der; Fedorov, A. V.; Til, S. van; Reimann, J.
    2012. Radiation effects in Structural and Functional Materials for Fission and Fusion Reactors Amsterdam [u.a.] : Elsevier, 2012 (Comprehensive Nuclear Materials ; 4), 463–510
  2196. X-ray diffraction studies of heterostructures based on solid solutions AlₓGa₁₋ₓAssub(y)P₁₋sub(y): Si
    Seredin, P. V.; Ternovaya, V. E.; Glotov, A. V.; Len’shin, A. S.; Arsent’ev, I. N.; Vinokurov, D. A.; Tarasov, I. S.; Leiste, H.; Prutskij, T.
    2012. All-Russian Symposium ’Semiconductor Lasers: Physics and Technology’, St.Petersburg, Russia, November 13-16, 2013
  2197. The ITER EC H&CD upper launcher: Maintenance concepts
    Ronden, D. M. S.; Baar, M. de; Chavan, R.; Elzendoorn, B. S. Q.; Grossetti, G.; Heemskerk, C. J. M.; Koning, J. F.; Landis, J. D.; Spaeh, P.; Strauss, D.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2198. Influence of thermomechanical treatment on the mechanical properties of 13.5Cr ODS steels
    He, P.; Lindau, R.; Möeslang, A.; Sandim, H. R. Z.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2199. Thermodynamic assessments of the Al₂O₃-Al₄C₃-AIN and Al₄C₃-AIN-SiC systems
    Pavlyuchkov, D.; Fabrichnaya, O.; Herrmann, M.; Seifert, H. J.
    2012. Journal of Phase Equilibria and Diffusion, 33, 357–368. doi:10.1007/s11669-012-0073-5
  2200. Spark plasma sintering of TiC particle-reinforced molybdenum composites
    Ohser-Wiedemann, R.; Weck, C.; Martin, U.; Müller, A.; Seifert, H. J.
    2012. International Journal of Refractory Metals and Hard Materials, 32, 1–6. doi:10.1016/j.ijrmhm.2011.12.001
  2201. Phase relations in the ZrO₂-Sm₂O₃-Y₂O₃-Al₂O₃ system: experimental investigation and thermodynamic modelling
    Fabrichnaya, O.; Savinykh, G.; Zienert, T.; Schreiber, G.; Seifert, H. J.
    2012. International Journal of Materials Research, 103, 1469–1487. doi:10.3139/146.110794
  2202. Phase relations in the ZrO₂-Nd₂O₃-Y₂O₃-Al₂O₃ system: Experimental study and thermodynamic modeling
    Fabrichnaya, O.; Savinykh, G.; Schreiber, G.; Seifert, H. J.
    2012. Journal of the European Ceramic Society, 32 (12), 3171–3185. doi:10.1016/j.jeurceramsoc.2012.04.034
  2203. Neutron imaging investigations of the hydrogen related degradation of the mechanical properties of zircaloy-4 cladding tubes
    Grosse, M.; Valance, S.; Stuckert, J.; Steinbrück, M.; Walter, M.; Kaestner, A.; Hartmann, S.; Santisteban, J.
    2012. MRS Fall Meeting & Exhibit, Boston, Mass., November 25-30, 2012
  2204. Reduction of surface losses of CVD diamond by passivation methods
    Scherer, T.; Aiello, G.; Grossetti, G.; Meier, A.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Siegel, M.; Meckbach, J. M.; Scheuring, A.
    2012. 37th Internat.Conf.on Infrared, Millimeter and Terahertz waves (IRMMW-THz 2012), Wollongong, AUS, September 23-28, 2012
  2205. FEM analyses of a CVD diamond Brewster window
    Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2012. 37th Internat.Conf.on Infrared, Millimeter and Terahertz waves (IRMMW-THz 2012), Wollongong, AUS, September 23-28, 2012
  2206. FEM analyses of a CVD diamond Brewster window
    Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2012. 37th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), 2012 : 23 - 28 Sept. 2012, University of Wollongong, Australia, Art.Nr. 6380159, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2012.6380159
  2207. Laser processing and functionalization of battery materials
    Pfleging, W.; Proell, J.; Kohler, R.; Seifert, H. J.
    2012. Laser and tera-hertz science and technology : [part of] International Photonics and Optoelectronics Meetings ; Wuhan, China. 1 - 2 November 2012, Optica Publishing Group (OSA)
  2208. Detailed study of defects in thin fullerite films
    Graivoronska, K. O.; Klimenkov, M.; Solonin, Y. M.; Nepijko, S. A.; Schönhense, G.
    2012. Crystal Research and Technology, 47, 1255–1268. doi:10.1002/crat.201200304
  2209. Development of thin film cathdes for lithium-ion batteries in the material system Li-Mn-O by r.f. magnetron sputtering
    Fischer, J.; Adelhelm, C.; Bergfeldt, T.; Chang, K.; Ziebert, C.; Leiste, H.; Stüber, M.; Ulrich, S.; Music, D.; Hallstedt, B.; Seifert, H. J.
    2012. 39th Inernat.Conf.on Metallurgical Coatings and Thin Films (ICMCTF 2012), San Diego, Calif., April 23-27, 2012
  2210. In-stiu X-ray reflectivity measurements during DC sputtering of vanadium carbide thin films
    Kaufholz, M.; Krause, B.; Kotapati, S.; Ulrich, S.; Stüber, M.; Baumbach, T.
    2012. 76.Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Dünne Schichten, Berlin, 25.-30.März 2012 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.47(2012), DS 26.3
  2211. Thin film cathodes for lithium ion batteries in the material system Li-Mn-O
    Fischer, J.; Adelhelm, C.; Ziebert, C.; Leiste, H.; Stüber, M.; Ulrich, S.; Seifert, H. J.
    2012. WeNDeLIB Workshop, Gustav-Stresemann-Institut Bonn, 21.-23.Februar 2012
  2212. Amorphe Kohlenstoffschichten und deren Eignung als biofunktionale Oerflächen
    Stüber, M.
    2012. Vortr.: Hochschule Furtwangen, 24.Oktober 2012
  2213. Investigation of the conductivity in Li-Mo-O thin films
    Fischer, J.; Seemann, K.; Leiste, H.; Ulrich, S.; Seifert, H. J.; Nowak, S.; Berkemeier, F.
    2012. Junior Euromat 2012, Lausanne, CH, July 23-27, 2012
  2214. Nonlinear optics on the silicon platform
    Freude, W.; Alloatti, L.; Melikyan, A.; Palmer, R.; Korn, D.; Lindenmann, N.; Vallaitis, T.; Hillerkuss, D.; Li, J.; Barklund, A.; Dinu, R.; Wieland, J.; Fournier, M.; Fedeli, J.; Walheim, S.; Leufke, P. M.; Ulrich, S.; Vincze, P.; Hahn, H.; Yu, H.; Bogaerts, W.; Dumont, P.; Baets, R.; Breiten, B.; Diederich, F.; Beels, M. T.; Biaggio, I.; Schimmel, T.; Koos, C.; Leuthold, J.
    2012. Optical Fiber Communication Conf. (OFC), Los Angeles, Calif., March 4-8, 2012
  2215. Ferromagnetic resonance frequency increase and line broadening of a Fe₃₃Co₄₃Hf₁₀N₁₄ film by high-frequency field perturbation
    Leiste, H.; Seemann, K.; Krüger, K.
    2012. Joint European Magnetic Symposia (JEMS 2012), Parma, I, September 9-14, 2012
  2216. Investigation of the conductivity in Li-Mo-O thin films
    Fischer, J.; Seemann, K.; Leiste, H.; Ulrich, S.; Seifert, H. J.; Berkemeier, F.; Nowak, S.
    2012. Junior Euromat 2012, Lausanne, CH, July 23-27, 2012
  2217. Energy fluxes in a radio-frequency magnetrom discharge for the deposition of superhard cubic boron nitride coatings
    Bornholdt, S.; Ye, J.; Ulrich, S.; Kersten, H.
    2012. Journal of Applied Physics, 112, 123301/1–9. doi:10.1063/1.4769800
  2218. Measurement of γ rays from ¹⁵N(p,γ)¹⁶O cascade and ¹⁵N(p,α₁γ)¹²C reactions
    Imbriani, G.; deBoer, R. J.; Best, A.; Couder, M.; Gervino, G.; Görres, J.; LeBlanc, P. J.; Leiste, H.; Lemut, A.; Stech, E.; Strieder, F.; Uberseder, E.; Wiescher, M.
    2012. Physical review / C, 85 (6), Art. Nr.: 065810. doi:10.1103/PhysRevC.85.065810
  2219. Significant stress reduction of cNB layers upon ion irradiation at elevated temperatures
    Weidner, S.; Ye, J.; Geburt, S.; Ronning, C.; Ulrich, S.
    2012. Nuclear Instruments and Methods in Physics Research B, 280, 18–21. doi:10.1016/j.nimb.2012.02.001
  2220. Non-contact temperature determination of embedded magnetic phases of hard coatings by exploitation of the magnetic hysteresis
    Thede, C.; Chemnitz, S.; Teliban, I.; Bechtold, C.; Klever, C.; Stüber, M.; Quandt, E.
    2012. Sensors and Actuators A, 178, 104–109. doi:10.1016/j.sna.2012.01.027
  2221. Extension of the cubic boron nitride thin film growth phase diagram
    Weidner, S.; Geburt, S.; Milz, S.; Ye, J.; Ulrich, S.; Ronning, C.
    2012. Diamond and Related Materials, 22, 88–91. doi:10.1016/j.diamond.2011.12.024
  2222. Stress reduction in cubic boron nitride by oxygen addition: Explanation of the mechanism by ab-initio simulations
    Houska, J.; Ulrich, S.
    2012. Surface and Coatings Technology, 206, 2541–2545. doi:10.1016/j.surfcoat.2011.11.007
  2223. Overview of LWR severe accident research activities at the Karlsruhe Institute of Technology
    Miassoedov, A.; Albrecht, G.; Foit, J. J.; Jordan, T.; Steinbrück, M.; Stuckert, J.; Tromm, W.
    2012. 14th Brazilian Congress of Thermal Sciences and Engineering (ENCIT 2012), Rio de Janeiro, BR, November 18-22, 2012
  2224. Overview of LWR severe accident research activities at the Karlsruhe Institute of Technology
    Miassoedov, A.; Albrecht, G.; Foit, J. J.; Jordan, T.; Steinbrück, M.; Stuckert, J.; Tromm, W.
    2012. Proc.of 14th Brazilian Congress of Thermal Sciences and Engineering (ENCIT 2012), Rio de Janeiro, BR, November 18-22, 2012, Associacao Brasileira de Engenharia e Ciencias Mecanicas (ABCM)
  2225. Combined XRD and XAFS study of the crystalline structure of V-C-AI-N
    Darma, S.; Krause, B.; Mangold, S.; Doyle, S.; Ulrich, S.; Stüber, M.; Baumbach, T.
    2012. Spring Meeting of the European Materials Research Society, Strasbourg, F, May 14-18, 2012, Spring Meeting of the European Materials Research Society (2012), Strasbourg, France, May 17–18, 2012
  2226. In situ X-Ray Reflectivity measurements during sputtering of vanadium carbide thin films
    Kaufholz, M.; Krause, B.; Kotapati, S.; Stüber, M.; Ulrich, S.; Baumbach, T.
    2012. Spring Meeting of the European Materials Research Society, Strasbourg, F, May 14-18, 2012
  2227. Influence of the deposition geometry on the microstructure of sputter-deposited V-Al-C-N coatings
    Darma, S.; Krause, B.; Doyle, S.; Mangold, S.; Ulrich, S.; Stüber, M.; Baumbach, T.
    2012. 76.Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Dünne Schichten, Berlin, 25.-30. März 2012 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.47(2012), DS 37.19, 76. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Dünne Schichten, Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.47(2012), DS 37.19 (2012), Berlin, Germany, March 25–30, 2012
  2228. X-ray study of surface layers of air-annealed Be₁₂Ti and Be₁₂V samples using synchrotron radiation
    Kurinskiy, P.; Moeslang, A.; Chakin, V.; Slobodskyy, T.; Minkevich, A. A.; Baumbach, T.; Dorn, C.; Goraieb, A. A.
    2012. Fusion Engineering and Design, 87, 872–875. doi:10.1016/j.fusengdes.2012.02.047
  2229. Coulometric titration for lithium-ion batteries
    Gotcu-Freis, P.; Pröll, J.; Kohler, R.; Mangang, M.; Besser, H.; Pfleging, W.; Seifert, H. J.
    2012. 1st KIST-KIT Workshop on Water and Energy, Seoul, Korea, October 14-20, 2012
  2230. Stability and safety of cathode materials (with possible Al doping) for Li-ion batteries: thermodynamic and electrochemical studies
    Ziebert, C.; Seifert, H. J.
    2012. 3rd Annual Internat.Conf.on Battery Safety, Las Vegas, Nev., December 6-7, 2012
  2231. Geplante Arbeiten im Teilproject 3.1 ’Bestimmung thermodynamischer Daten’
    Gotcu-Freis, P.; Markus, T.; Pirll, M.; Ziebert, C.; Seifert, H. J.
    2012. Kick-Off Meeting des Helmholtz Portofolios ’Elektrochemische Speicher im System - Zuverlässigkeit und Integration’, Karlsruhe, 10.Mai 2012
  2232. A thermodynamic study of Li-Al-O system and application to the cathode materials for lithium-ion batteries
    Gotcu-Freis, P.; Ziebert, C.; Seifert, H. J.
    2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
  2233. Metallic foam structures, dendrites and implementation optimizations for phase-field modeling
    Vondrous, A.; Nestler, B.; August, A.; Wesner, E.; Choudhury, A.; Hötzer, J.
    2012. High performance computing in science and engineering ’ 11 : transactions of the High Performance Computing Center, Stuttgart (HLRS) 2011. Ed.: W.E. Nagel, 595–606, Springer-Verlag. doi:10.1007/978-3-642-23869-7_43
  2234. Comparison of phase-field and cellular automaton models for dendritic solidification in Al-Cu alloy
    Choudhury, A.; Reuther, K.; Wesner, E.; August, A.; Nestler, B.; Rettenmayr, M.
    2012. Computational materials science, 55, 263–268. doi:10.1016/j.commatsci.2011.12.019
  2235. Multiscale simulations on the coarsening of Cu-rich precipitates in α-Fe using kinetic Monte Carlo, molecular dynamics and phase-field simulations
    Molnar, D.; Mukherjee, R.; Choudhury, A.; Mora, A.; Binkele, P.; Selzer, M.; Nestler, B.; Schmauder, S.
    2012. Acta materialia, 60, 6961–6971. doi:10.1016/j.actamat.2012.08.051
  2236. Effect of solutal Marangoni convection on motion, coarsening, and coalescence of droplets in a monotectic system
    Wang, F.; Choudhury, A.; Selzer, M.; Mukherjee, R.; Nestler, B.
    2012. Physical review / E, 86 (6), 066318/1–13. doi:10.1103/PhysRevE.86.066318
  2237. Influence of boron carbide on core degradation during severe accidents in LWRs
    Steinbrück, M.; Stegmaier, U.
    2012. 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012
  2238. Breakaway oxidation during the QUENCH-06 experiment
    Steinbrück, M.; Freeburg, E.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2239. Update of the QUENCH programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2240. Investigation of the annealing behaviour of hydride precipitates in zircaloy-4
    Prestel, S.; Grosse, M.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2241. Neutron imaging investigations of the hydrogen related degradation of the mechanical properties of zircaloy-4 cladding tubes
    Grosse, M.; Valance, S.; Rössger, C.; Kaestner, A.; Hartmann, S.; Santisteban, J.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2242. Analysis of the hydrogen distributions in QUENCH-LOCA cladding tubes
    Grosse, M.; Stuckert, J.; Steinbrück, M.; Walter, M.; Kaestner, A.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2243. Oxidation of silicon carbide in oxygen and water steam at high temperature
    Avincola, V.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2244. Results of the reference bundle test QUENCH-L1 with Zircaloy-4 claddings and future planning of the QUENCH-LOCA program
    Stuckert, J.; Rössger, C.; Walter, M.; Große, M.; Steinbrück, M.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2245. Post-test results of the QUENCH-16 bundle test on air ingress: complex cladding oxidation during reflood and combined hydrogen
    Stuckert, J.; Steinbrück, M.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2246. Influence of boron carbide on core degradation during severe accidents in LWRs
    Steinbrück, M.; Stegmaier, U.
    2012. Proc.of the 18th Internat. QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2247. Breakaway oxidation during the QUENCH-06 experiment
    Steinbrück, M.; Freeburg, E.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2248. Update of the QUENCH programme
    Steinbrück, M.; Stuckert, J.; Große, M.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2249. Investigation of the annealing behaviour of hydride precipitates in zircaloy-4
    Prestel, S.; Grosse, M.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2250. Neutron imaging investigations of the hydrogen related degradation of the mechanical properties of zircaloy-4 cladding tubes
    Grosse, M.; Valance, S.; Rössger, C.; Kaestner, A.; Hartmann, S.; Santisteban, J.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012 , 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2251. Analysis of the hydrogen distributions in QUENCH-LOCA cladding tubes
    Grosse, M.; Stuckert, J.; Steinbrück, M.; Walter, M.; Kaestner, A.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2252. Oxidation of silicon carbide in oxygen and water steam at high temperature
    Avincola, V.
    2012. Proc.of the 18th Internat.QUENCH Workshop, Karlsruhe, November 20-22, 2012. Hrsg.: M. Steinbrück, CD-ROM, Karlsruher Institut für Technologie (KIT)
  2253. Synthesis of nanocrystalline solid solutions AlSnO (y = 0.57, 0.4) investigated by XRD, Al/Sn MAS NMR and Mössbauer spectroscopy
    Issac, I.; Heinzmann, R.; Becker, S. M.; Bräuninger, T.; Zhao-Karger, Z.; Adelhelm, C.; Kiran Chakravadhanula, V. S.; Kübel, C.; Ulrich, A. S.; Indris, S.
    2012. RSC Advances, 2 (28), 10700–10707. doi:10.1039/c2ra21540c
  2254. Reduction of surface losses of CVD diamond by passivation methods
    Scherer, T. A.; Aiello, G.; Grossetti, G.; Meier, A.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.; Siegel, M.; Meckbach, J. M.; Scheuring, A.
    2012. Proceedings of the 37th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz’12), Wollongong, Australia, September 23-38, 2012, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz.2012.6380403
  2255. Updates on ITER EC system design
    Omori, T.; Henderson, M.; Albajar, F.; Alberti, S.; deBaar, M. R.; Baruah, U.; Beckett, B.; Bigelow, T.; Bonicelli, T.; Bruschi, A.; Caughman, J.; Chavan, R.; Darbos, C.; Denisov, G.; Fasel, D.; Farina, D.; Gandini, F.; Gassman, T.; Goodman, T. P.; Hanson, G.; Hogge, J. P.; Jean, O.; Kajiwara, K.; Kasparek, W.; Kern, S.; Kobayashi, N.; Moro, A.; Nazare, C.; Oda, Y.; Paganakis, I.; Piosczyk, B.; Platania, P.; Plaum, B.; Poli, E.; Purohit, D.; Rampini, G.; Rao, S. L.; Rasmussen, D.; Ronden, D. M. S.; Saibene, G.; Sakamoto, K.; Scherer, T.; Shapiro, M.; Singh, N. P.; Strauss, D.; Sauter, O.; Takahashi, K.; Temkin, R. J.; Zohm, H.
    2012. Workshop on Physics and Technology of RF Heating of Fusion Plasmas, Nara, J, December 11-13, 2012
  2256. Operation of the multifrequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Schubert, M.; Schütz, H.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Strauss, D.; Gantenbein, G.; Flamm, J.; Kasparek, W.; Höhnle, H.; Lechte, C.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2012. Proc.of 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011, 468–470, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/irmmw-THz.2011.6105142
  2257. Grooved CVD diamond windows: grooves’ profiles and structural simulations
    Vaccaro, A.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Späh, P.; Strauss, D.; Stober, J.; Wagner, D.; Wit, H. G. M. de
    2012. Proc.of 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011, 383–384, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/irmmw-THz.2011.6105093
  2258. Dielectric properties of natural grown Tourmaline at 100 GHz
    Scherer, T. A.; Meier, A.; Landmann, A.
    2012. Proc.of 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011, 213–214, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/irmmw-THz.2011.6104883
  2259. Experimental analysis of the inserted waveguide CVD diamond window prototype for the ITER ECRH upper launcher
    Scherer, T. A.; Meier, A.; Strauss, D.; Schreck, S.; Takahashi, K.; Kajiwara, K.; Oda, Y.; Sakamoto, K.; Saibene, G.
    2012. Proc.of 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011, 40–41, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/irmmw-THz.2011.6104800
  2260. Optimization and limitation of known DEMO divertor concepts
    Reiser, J.; Rieth, M.
    2012. Fusion Engineering and Design, 87, 718–721. doi:10.1016/j.fusengdes.2012.02.010
  2261. Tungsten foil laminate for structural divertor applications - analyses and characterisation of tungsten foil
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.; Yi, X.; Armstrong, D. E. J.
    2012. Journal of Nuclear Materials, 424, 197–203. doi:10.1016/j.jnucmat.2012.02.030
  2262. The European fusion materials science programme
    Möslang, A.
    2012. German/Japan Seminar on Energy Materials, Institute of Advanced Energy, Kyoto, J, February 2-3, 2012
  2263. High temperature applications: the EU integrated fusion materials programme
    Möslang, A.; Diegele, E.; Dudarev, S.; Rieth, M.; Gonzalez de Vicente, S. M.
    2012. 2nd European Energy Conference (E2C), Maastricht, NL, April 17-20, 2012
  2264. Overview on fatigue results after neutron irradiation of EUROFER steel
    Möslang, A.; Klimenkov, M.; Lindau, R.; Materna-Morris, E.; Rieth, M.
    2012. 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), Mamallapuram, IND, January 22-25, 2012
  2265. Selected divertor studies and experiments
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. 20th European Fusion Physics Workshop, Ericeira, P, December3-5, 2012
  2266. Laser processing and functionalization of battery materials
    Pfleging, W.; Proell, J.; Kohler, R.; Seifert, H. J.
    2012. Conf.on Frontiers of Manufacturing with Photons, Energetic Particles and Power Fields (MP3 2012), Wuhan, Chaina, November 1-2, 2012
  2267. Divertor design and materials
    Rieth, M.
    2012. Vortr.: Universität Oxford, GB, 6.November 2012
  2268. Wohin mit dem Strom
    Torge, M.; Pröll, J.; Kohler, R.; Pfleging, W.
    2012. Wissenschaftsfestival ’Rätsel der Materie’, Göttingen, 18.-22.September 2012
  2269. Laser generated 3D microstructures in lithium manganese oxide cathodes
    Proell, J.; Kohler, R.; Torge, M.; Mangang, M.; Besser, H.; Pfleging, W.
    2012. 1st KIST-KIT Workshop on Water and Energy, Seoul, Korea, October 14-20, 2012
  2270. Laser-Prozesstechnologien für Oberflächenstrukturierung und Werkstoffbearbeitung
    Pfleging, W.
    2012. Opening Werkstofftechnik-Labor, Hochschule Tuttlingen, 24.Oktober 2012
  2271. Laser processing of thick film electrode materials for Li-ion bateries
    Pfleging, W.; Kohler, R.; Torge, M.; Mangang, M.; Besser, H.; Proell, J.
    2012. 1st KIST-KIT Workshop on Water and Energy, Seoul, Korea, October 14-20, 2012
  2272. Lasermodifizierung von Elektrodenmaterialien
    Pfleging, W.; Mangang, M.
    2012. Elektrochemische Speicher im System - Zuverlässigkeit und Integration, Portofolio Workshop, Karlsruhe, 10.Mai 2012
  2273. Interface of nanoparticle-coated electropolished stents
    Neumeister, A.; Bartke, D.; Bärsch, N.; Weingärtner, T.; Guetaz, L.; Montani, A.; Compagnini, G.; Barcikowski, S.
    2012. Langmuir, 28 (33), 12060–12066. doi:10.1021/la300308w
  2274. Laser-printed and processed LiCoO₂ cathode thick films for Li-ion microbatteries
    Kim, H.; Proell, J.; Kohler, R.; Pfleging, W.; Pique, A.
    2012. Journal of Laser Micro/Nanoengineering, 7, 320–325. doi:10.2961/jlmn.2012.03.0016
  2275. Results of the reference bundle test QUENCH-L1 with Zircaloy-4 claddings and future planning of the QUENCH-LOCA program
    Stuckert, J.; Rössger, C.; Walter, M.; Große, M.; Steinbrück, M.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2276. Post-test results of the QUENCH-16 bundle test on air ingress: complex cladding oxidation during reflood and combined hydrogen
    Stuckert, J.; Steinbrück, M.
    2012. 18th Internat.QUENCH-Workshop, Karlsruhe, November 20-22, 2012
  2277. Status, Vorarbeiten und geplante Arbeiten des IAM-AWP in der Helmholtz-Energie-Allianz ’Stationäre elektrochemische Feststoff-Speicher und -Wandler
    Cui, Y.; Ziebert, C.; Rohde, M.; Seifert, H. J.
    2012. 2.Statustreffen der Helmholtz-Energie-Allianz ’Stationäre elektrochemische Feststoff-Speicher und -Wandler’, Jülich, 24.Oktober 2012
  2278. Annual report of the EERA joint programme on energy storage
    Ziebert, C.; Conte, M.; Seifert, H. J.
    2012. EERA Joint Programme Coordinator Meeting, Bruxelles, B, October 22, 2012
  2279. Electrochemical-calorimetric studies on safety fundamentals of lithium ion battery pouch cells
    Schuster, E.; Ziebert, C.; Seifert, H. J.
    2012. Pacific RIM Meeting on Electrochemical and Solid State Science, Honolulu, Hawaii, October 7-12, 2012
  2280. Geplante Arbeiten des IAM-AWP in der Helmholtz-Energie-Allianz ’Stationäre elektrochemische Feststoff-Speicher und -Wandler
    Ziebert, C.; Rohde, M.; Seifert, H. J.
    2012. 1.Statustreffen der Helmholtz-Energie-Allianz ’Stationäre elektrochemische Feststoff-Speicher und -Wandler’, Jülich, 23.Mai 2012
  2281. Status of the EERA joint programme on energy storage
    Seifert, H. J.; Ziebert, C.
    2012. 2nd EERA Annual Congress, Bruxelles, B, May 2-3, 2012
  2282. Material development for solid state electrolytes for advanced Li-ion cells
    Rohde, M.; Ziebert, C.; Seifert, H. J.
    2012. 2nd European Energy Conf., Maastricht, NL, April 17-20
  2283. Electrochemical-calorimetric studies on safety fundamentals of lithium ion battery pouch cells
    Schuster, E.; Ziebert, C.; Seifert, H. J.
    2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
  2284. The EERA joint programme on enegy storage
    Seifert, H. J.; Ziebert, C.
    2012. 2nd European Energy Conf., Maastricht, NL, April 17-20
  2285. Annealing behaviour of rafm ods-eurofear steel
    Sandim, H. R. Z.; Renzetti, R. A.; Padilha, A. F.; Möslang, A.; Lindau, R.; Raabe, D.
    2012. Fusion Science and Technology, 61, 136–140
  2286. Thermodynamics and phase diagrams for lithium ion batteries
    Schuster, E.; Lepple, M.; Cupid, D. M.; Franke, P.; Ziebert, C.; Seifert, H. J.
    2012. Phase Equilibria : Materials for the Future ; APDIC 4th World Round Robin Seminar, London, GB, June 25, 2012
  2287. Work package No.1: Irradiation damage - advanced characterization and modelling
    Commin, L.
    2012. FabriCharMe GOT Program Progress Meeting, Saclay, F, November 12, 2012
  2288. Effect of warm pre-stressing on fracture toughness of Eurofer97 steel
    Ilchuk, N.; Commin, L.; Spätig, P.; Odette, G. R.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2289. Fail safe and cost effective fabrication of a first wall by diffusion welding
    Commin, L.; Rieth, M.; Dafferner, B.; Zimmermann, H.; Bölich, D.; Baumgärtner, S.; Ziegler, R.; Dichiser, S.; Fabry, T.; Fischer, S.; Hildebrand, W.; Palussek, O.; Ritz, H.; Sponda, A.
    2012. 2nd Joint IAEA - EC Topical Meeting on Development of New Structural Materials for Advanced Fission and Fusion Reactor Systems, Ispra, I, April 16-20, 2012
  2290. Material development for the water-cooled divertor concept of the DEMO European fusion reactor
    Commin, L.; Antusch, S.; Goldacker, W.; Lukits, P.; Rieth, M.; Bolich, D.; Hoffmann, M.
    2012. Nuclear Materials Conf. (NuMat 2012), Osaka, J, October 22-25, 2012
  2291. Characterization of ODS-Eurofer/Eurofer dissimilar electron beam welds
    Commin, L.; Rieth, M.; Widak, V.; Dafferner, B.; Heger, S.; Zimmermann, H.; Materna-Morris, E.; Lindau, R.
    2012. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2292. Progress in the integration of test blanket systems in ITER equatorial port cells and in the interfaces definition
    Pascal, R.; Beloglazov, S.; Bonagiri, S.; Commin, L.; Cortes, P.; Giancarli, L. M.; Gliss, C.; Iseli, M.; Lanza, R.; Levesy, B.; Martins, J. P.; Neviere, J. C.; Patisson, L.; Plutino, D.; Shu, W.; Swami, H. L.
    2012. 10th Internat.Symp.on Fusion Nuclear Technology (ISFNT 2011), Portland, Oreg., September 11-16, 2011
  2293. Thermodynamics and phase diagrams for lithium ion batteries
    Cupid, D. M.; Ziebert, C.; Schuster, E.; Seifert, H. J.
    2012. Phase Equilibria : Materials for the Future ; APDIC 4th World Round Robin Seminar, London, GB, June 25, 2012, 29–32, Institute of Materials
  2294. Progress in the integration of test blanket systems in ITER equatorial port cells and in the interfaces definition
    Pascal, R.; Beloglazov, S.; Bonagiri, S.; Commin, L.; Cortes, P.; Giancarli, L. M.; Gliss, C.; Iseli, M.; Lanza, R.; Levesy, B.; Martins, J. P.; Neviere, J. C.; Patisson, L.; Plutino, D.; Shu, W.; Swami, H. L.
    2012. Fusion Engineering and Design, 87, 1347–1351. doi:10.1016/j.fusengdes.2012.03.010
  2295. Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds
    Commin, L.; Dumont, M.; Rotinat, R.; Pierron, F.; Masse, J. E.; Barrallier, L.
    2012. Materials Science and Engineering A, 551, 288–292. doi:10.1016/j.msea.2012.05.021
  2296. Preliminary design of the ITER ECH upper launcher
    Strauss, D.; Aiello, G.; Chavan, R.; Cirant, S.; deBaar, M.; Farina, D.; Gantenbein, G.; Goodman, T.; Henderson, M. A.; Kasparek, W.; Kleefeldt, K.; Landis, J. D.; Meier, A.; Moro, A.; Platania, P.; Plaum, B.; Poli, E.; Ramponi, G.; Ronden, D.; Saibene, G.; Sanchez, F.; Sauter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Vaccaro, A.; Zohm, H.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2297. ITER ECRH diamond window technology status
    Scherer, T. A.; Strauss, D.; Vaccaro, A.; Aiello, G.; Schreck, S.; Meier, A.; Späh, K.; Takahashi, K.; Kajiwara, K.; Oda, Y.; Sakamoto, K.
    2012. Workshop on Physics and Technology of RF Heating of Fusion Plasmas, Nara, J, December 11-13, 2012
  2298. The ITEREC H&CD upper launcher: design develoments towards final design
    Schreck, S.; Aiello, G.; Meier, A.; Scherer, T. A.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2012. Workshop on Physics and Technology of RF Heating of Fusion Plasmas, Nara, J, December 11-13, 2012
  2299. Tomographic atom probe study of un- and irradiated ODS EUROFER steel
    Rogozhkin, S.; Aleev, A.; Klimenkov, M.; Lindau, R.; Möslang, A.; Nikitin, A.; Vladimirov, P.; Zaluzhnyi, A.
    2012. 2nd Joint IAEA - EC Topical Meeting on Development of New Structural Materials for Advanced Fission and Fusion Reactor Systems, Ispra, I, April 16-20, 2012
  2300. Investigations on the joining of 9-20Cr ODS and Non-ODS steels applying diffusion, electron beam and friction stir welding
    Commin, L.; Jäntsch, U.; Klimenkov, M.; Lindau, R.; Möslang, A.; Norajitra, P.; Bergmann, L.; Santos, J. F. dos
    2012. 2nd Joint IAEA - EC Topical Meeting on Development of New Structural Materials for Advanced Fission and Fusion Reactor Systems, Ispra, I, April 16-20, 2012
  2301. Investigations of high concentration of helium atoms effects on microstructure and mechanical property changes in EUROFER ODS materials
    Ryazanov, A. I.; Chugonov, O. K.; Latushkin, S. T.; Lindau, R.; Möslang, A.; Prikhodko, K. E.; Semenov, E. V.; Unezhev, V. N.; Vladimirov, P.
    2012. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2302. Recent progress of R&D activities on reduced activation ferritic/martensitic steels
    Huang, Q.; Baluc, N.; Dai, Y.; Jitsukawa, S.; Kimura, A.; Kurtz, R. J.; Lindau, R.; Muroga, T.; Odette, G. R.; Raj, B.; Stoller, R. E.; Tan, L.; Tanigawa, H.; Tavassoli, A. F.; Wan, F.; Wu, Y.
    2012. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2303. Advanced materials characterization and modeling using synchrotron, neutron, TEM, and novel micro-mechanical techniques. A European effort to accelerate fusion materials development
    Linsmeier, C.; Fu, C. C.; Kaprolat, A.; Nielsen, S. F.; Mergia, K.; Schäublin, R.; Lindau, R.; Bolt, H.; FEMaS Partners
    2012. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2304. The ITER EC H&CD upper launcher: EM disruption analysis
    Vaccaro, A.; Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Späh, P.; Strauß, D.; Saibene, G.; Cavinato, M.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2305. The ITER EC H&CD upper launcher: vertical remote handling applied to the BSM maintenance
    Grossetti, G.; Aiello, G.; Heemskerk, C.; Elzendoorn, B.; Geßner, R.; Koning, J.; Meier, A.; Ronden, D.; Späh, P.; Scherer, T.; Schreck, S.; Strauß, D.; Vaccaro, A.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2306. Nano-scaled materials for fusion power plants
    Lindau, R.; Möslang, A.
    2012. 5th German-Japanese Symp.on Nanostructures, 5th Internat.Symp.on Nanostructures OZ-12, Wenden-Olpe, March 4-6, 2012
  2307. Thermodynamic description of the Li-Cu-O system for conversion type electrode materials for lithium ion batteries
    Lepple, M.; Cupid, D. M.; Franke, P.; Ziebert, C.; Seifert, H. J.
    2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
  2308. Thermodynamic aspects of the Li-Cu-Fe-O system used for conversion type electrode materials for lithium ion batteries
    Lepple, M.; Cupid, D.; Franke, P.; Ziebert, C.; Seifert, H. J.
    2012. Junior Euromat 2012, Lausanne, CH, July 23-27, 2012
  2309. Thermodynamics of copper oxide conversion type electrodes for lithium-ion batteries
    Lepple, M.; Cupid, D. M.; Franke, P.; Ziebert, C.; Seifert, H. J.
    2012. 1st KIC InnoEnergy Scientist Conf., Leuven, B, November 4-9, 2012
  2310. Raspukhanie, termodesorbcionnye i mekhaniceskie svojstva berillida titana pri vysokodoznom nejtronnom obluchenii. Das Schwellen sowie Thermodesorptions- und mechanische Eigenschaften von Titanberyllid bei hoher Neutronenstrahldosis. PhD dissertation
    Kurinskiy, P. E.
    2012. Dissertation, Staatliche Universität Uljanowsk 2012
  2311. Manufacturing studies of double wall components for the ITER EC H&CD upper launcher
    Späh, P.; Aiello, G.; Goldmann, A.; Kleefeldt, K.; Kroiss, A.; Meier, A.; Obermeier, C.; Scherer, T.; Schreck, S.; Serikov, A.; Strauss, D.; Vaccaro, A.
    2012. Fusion Engineering and Design, 87, 956–960. doi:10.1016/j.fusengdes.2012.02.046
  2312. Early core degradation with special emphasis on oxidation and B₄C control rod failure
    Steinbrück, M.
    2012. Internat.Seminar on Fuel Degradation Mechanisms in Severe Accidents, Tokyo, J, October 26, 2012
  2313. High-temperature oxidation and mutual interactions of materials during severe nuclear accidents
    Steinbrück, M.; Große, M.; Stuckert, J.
    2012. Nuclear Materials Conf. (NuMat 2012), Osaka, J, October 22-25, 2012
  2314. Influence of boron carbide on core degradation during severe accidents in LWRs
    Steinbrück, M.
    2012. 20th Internat.Conf.on Nuclear Engineering (ICONE20), Anaheim, Calif., July 30 - August 3, 2012
  2315. Oxidation of zirconium alloys in mixed atmospheres containing nitrogen
    Steinbrück, M.
    2012. EFC Workshop ’Beyond Single Oxidants’, Frankfurt, September 19-21, 2012
  2316. Selected aspects of materials behavior during severe nuclear accidents in nuclear reactors
    Steinbrück, M.
    2012. HiTemp 2012 Conf., München, September 11-13, 2012
  2317. Influence of boron carbide on core degradation during severe accidents in LWRs
    Steinbrück, M.
    2012. Proc.of the 2012 20th Internat.Conf.on Nuclear Engineering Collocated with the ASME 2012 Power Conf., Anaheim, Calif., July 30 - August 3, 2012, DVD, The American Society of Mechanical Engineers (ASME)
  2318. Role of He in swelling of neutron irradiated beryllium
    Vladimirov, P.; Borodin, V.
    2012. 10th IEA Internat.Workshop on Beryllium Technology, Karlsruhe, September 19-21, 2012
  2319. Comparative study of hydrogen uptake and diffusion in ODS steels
    Malitckii, E.; Yagodzinskyy, Y.; Ganchenkova, M.; Binyukova, S.; Hänninen, H.; Lindau, R.; Vladimirov, P.; Möslang, A.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2320. TEM characterization of precipitates in EUROFER 97
    Klimenkov, M.; Lindau, R.; Materna-Morris, E.; Möslang, A.
    2012. Progress in Nuclear Energy, 57, 8–13. doi:10.1016/j.pnucene.2011.10.006
  2321. Characterization of microstructural and mechanical properties of a reduced activation ferritic oxide dispersion strengthened steel
    Eiselt, C. C.; Klimenkov, M.; Lindau, R.; Möslang, A.
    2012. Journal of Nuclear Materials, 416, 30–34. doi:10.1016/j.jnucmat.2011.03.017
  2322. Morpho-topological volume analysis of porous materials for nuclear applications
    Pieritz, R.; Spino, J.; Vladimirov, P.; Ferrero, C.
    2012. International Journal of Materials Research, 103, 250–257. doi:10.3139/146.110670
  2323. X-ray phase contrast and fluorescence nanotomography for material studies
    Suhonen, H.; Xu, F.; Helfen, L.; Ferrero, C.; Vladimirov, P.; Cloetens, P.
    2012. International Journal of Materials Research, 103, 179–183. doi:10.3139/146.110664
  2324. XAFS and TEM studies of the structural evolution of yttrium-enriched oxides in nanostructured ferritic alloys fabricated by a powder metallurgy process
    He, P.; Liu, T.; Möslang, A.; Lindau, R.; Ziegler, R.; Hoffmann, J.; Kurinskiy, P.; Commin, L.; Vladimirov, P.; Nikitenko, S.; Silveir, M.
    2012. Materials Chemistry and Physics, 136, 990–998. doi:10.1016/j.matchemphys.2012.08.038
  2325. W/Mo-Laminatrohre für Hochtemperaturanwendungen
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. DFG-Nachwuchsakademie Materialwissenschaft und Werkstofftechnik, Attendorn, 29.-31.Oktober 2012
  2326. Divertor from the technology perspective
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. 1st IAEA DEMO Programme Workshop (DPW-2012), Los Angeles, Calif., October 15-18, 2012
  2327. Ductile tungsten (W) pipes for divertor applications
    Reiser, J.; Rieth, M.; Dafferner, B.; Commin, L.; Hoffmann, A.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2328. Experimental investigations on a step-frequency tunable gyrotron with a diamond Brewster angle output window
    Gantenbein, G.; Samartsev, A.; Dammertz, G.; Jelonnek, J.; Losert, M.; Schlaich, A.; Scherer, T.; Strauss, D.; Thumm, M.; Wagner, D.
    2012. Workshop on Physics and Technology of RF Heating of Fusion Plasmas, Nara, J, December 11-13, 2012
  2329. Development of lithium manganese based thin film cathodes for lithium-ion batteries by r.f.magnetron sputtering
    Fischer, J.; Adelhelm, C.; Ziebert, C.; Ulrich, S.; Leiste, H.; Schuster, E.; Seifert, H. J.
    2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
  2330. The ITER EC H&CD upper launcher: design, analysis and testing of a bolted joint for the blanket shield module
    Gessner, R.; Aiello, G.; Grossetti, G.; Meier, A.; Ronden, D.; Spach, P.; Scherer, T.; Schreck, S.; Strauss, D.; Vaccaro, A.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2331. Investigations of dissimilar welds of the high temperature steels P91 and PM2000
    Widak, V.; Dafferner, B.; Heger, S.; Rieth, M.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2332. Recrystallization of ODS alloys
    Hoffmann, J.; Armstrong, D. E. J.; Britton, B. E.; Rieth, M.
    2012. ODS Alloys for Nuclear Applications Workshop, Oxford, GB, September 24-26, 2012
  2333. The ITER EC H&CD upper launcher: structural system
    Spaeh, P.; Aiello, G.; Gessner, R.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Serikov, A.; Strauss, D.; Vaccaro, A.; Weinhorst, B.
    2012. 27th Symp.on Fusion Technology (SOFT 2012), Liege, B, September 24-28, 2012
  2334. Low temperature production process for hermetic transparent implant packages
    Rheinschmitt, L.; Hahn, L.; Leiste, H.; Gengenbach, U.; Bretthauer, G.
    2012. BMT 2012 : 46.Jahrestagung der Deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Jena, 16.-19.September 2012
  2335. Role of lithium in the formation of He bubbles in boron-alloyed steel after neutron irradiation
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2012. 15th European Microscopy Congress (EMC 2012), Manchester, GB, September 16-21, 2012
  2336. TEM study of boron effect on the microstructure of 9CrWTaVB martensitic steel
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.; Jäntsch, U.
    2012. 15th European Microscopy Congress (EMC 2012), Manchester, GB, September 16-21, 2012
  2337. Role of lithium in the formation of He bubbles in boron-alloyed steel after neutron irradiation
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2012. 15th European Microscopy Congress (EMC 2012), Manchester, GB, September 16-21, 2012
  2338. TEM study of boron effect on the microstructure of 9CrWTaVB martensitic steel
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.; Jäntsch, U.
    2012. 15th European Microscopy Congress (EMC 2012), Manchester, GB, September 16-21, 2012
  2339. Synthesis and characterisation of novel magnetron sputtered Cr-Zr-O thin films with corundum-type structure
    Spitz, S.; Stüber, M.; Diechle, D.; Leiste, H.; Ulrich, S.; Seifert, H. J.
    2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
  2340. Mikrostrukturelle Untersuchungen am Transmissions-Elektronen-Mikroskop
    Jäntsch, U.; Klimenkov, M.; Rieth, M.
    2012. 46. Metallographie-Tagung der Deutschen Gesellschaft für Materialkunde. Rostock, 19.-21.September 2012
  2341. Fe₃₂Co₄₄Hf₁₂N₁₂/TiN multilayer coatings with combined wear resistant and ferromagnetic properties for in-situ high frequency sensor applications
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.; Seifert, H. J.
    2012. Biannual Internat.Conf.on Materials Science Engineering (MSE 2012), Darmstadt, September 25-27, 2012
  2342. Structural, magnetic and mechanical investigations on Fe₃₂Co₄₄Hf₁₂N₁₂/TiN thin multilayer coatings with wear resistant and ferromagnetic properties
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.; Seifert, H. J.
    2012. 13th Internat.Conf.on Plasma Surface Engineering (PSE 2012), Garmisch- Partenkirchen, September 10-14, 2012
  2343. Synthesis and characterisation of reactively r.f.magnetron sputtered Cr-Zr-O thin films
    Spitz, S.; Stueber, M.; Leiste, H.; Ulrich, S.
    2012. 13th Internat.Conf.on Plasma Surface Engineering (PSE 2012), Garmisch-Partenkirchen, September 10-14, 2012
  2344. Magnetron sputtering of Al-Cr-O thin films at various substrate temperatures
    Diechle, D.; Stueber, M.; Leiste, H.; Ulrich, S.; Schier, V.
    2012. 13th Internat.Conf.on Plasma Surface Engineering (PSE 2012), Garmisch-Partenkirchen, September 10-14, 2012
  2345. Surface characteristics and wettability of magnetron-sputtered oxygen containing amorphous carbon (a-C:O) thin films
    Stüber, M.; Danneil, F.; Rinke, M.; Ulrich, S.; Welle, A.; Lewin, E.; Jansson, U.
    2012. Internat.Conf.on Diamond and Carbon Materials, Granada, E, September 3-6, 2012
  2346. CVD diamond Brewster window: feasibility study by FEM analysis
    Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2012. EPJ Web of Conferences, 32, Art.Nr. 04014/1–6. doi:10.1051/epjconf/20123204014
  2347. Untersuchung der Kinektik von Barytausfällungen aus Geothermalwasser unter dem Einfluss von Scherung und verschiedenen typischen Wärmeaustauscher-Geometrien
    Canic, T.; Baur, S.; Kuhn, D.; Adelhelm, C.; Seibt, A.; Wolfgramm, M.; Rauppach, K.; Möllmann, G. U.
    2012. Abschlussbericht zum BMU Vorhaben FKZ:0325160 Hannover : TIB, 2012
  2348. Herstellung und Charakterisierung oxidbasierter PVD-Hartstoffschichten in den Stoffsystemen Al-Cr-O und Al-Cr-O-N. PhD dissertation
    Diechle, D.
    2012. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000029586
  2349. Two component tungsten powder injection molding for mass production of the He-cooled DEMO divertor parts
    Antusch, S.; Müller, M.; Norajitra, P.; Pintsuk, G.; Piotter, V.; Ritzhaupt-Kleissl, H. J.; Weingärtner, T.
    2012. Fusion science and technology, 62, 110–115
  2350. Composition and microstructure of r.f. magnetron sputter-deposited Cr-Zr-O thin films
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.
    2012. KIT PhD Symp.2012, Karlsruhe, 22.März 2012
  2351. In situ study of the temperature-dependent crystallization process of vanadium carbide
    Kotapati, S.; Darma, S.; Kaufholz, M.; Krause, B.; Baumbach, T.; Mantilla, M.; Weigel, R.; Stüber, M.; Ulrich, S.
    2012. KIT PhD Symp.2012, Karlsruhe, 22.März 2012
  2352. Combined ferromagnetic and mechanical properties of Fe₃₂Co₄₄Hf₁₂N₁₂ / TiN multilayer coatings for high frequency sensor applications
    Krueger, K.; Stueber, M.; Seemann, K.; Leiste, H.; Ulrich, S.
    2012. KIT PhD Symp.2012, Karlsruhe, 22.März 2012
  2353. Duktilisierung von Wolfram : Synthese, Analyse und Charakterisierung von Wolframlaminaten aus Wolframfolie. PhD dissertation
    Reiser, J.
    2012. KIT Scientific Publishing. doi:10.5445/KSP/1000029305
  2354. Vom Laser zur Lithium-Ionen-Batterie. Neue Chancen für Green Photonics
    Mangang, M.; Proell, J.; Kohler, R.; Pfleging, W.
    2012. Chancen der Energiewende : 1.Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 19.Juni 2012
  2355. Experimental results of the QUENCH-16 bundle test on air ingress
    Stuckert, J.; Steinbrück, M.
    2012. Internat.Congress on the Advances in Nuclear Power Plants (ICAPP 12), Chicago, Ill., June 24-28, 2012, CD-ROM, American Nuclear Society (ANS)
  2356. QUENCH-LOCA program at KIT and results of the QUENCH-L0 bundle test
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2012. Jahrestagung Kerntechnik 2012, Stuttgart, 22.-24.Mai 2012, CD-ROM, INFORUM Verlags- und Verwaltungsgesellschaft mbH
  2357. Nanosecond and picosecond laser structuring of electrode materials for lithium-ion batteries
    Kohler, R.; Proell, J.; Besser, H.; Torge, M.; Scholz, S.; Dobrev, T.; Ulrich, S.; Pfleging, W.
    2012. Materials Research Society Fall Meeting, Boston, Mass., November 28 - December 2, 2011
  2358. Influence of laser-generated surface structures on electrochemical performance of lithium cobalt oxide
    Kohler, R.; Proell, J.; Ulrich, S.; Przybylski, M.; Seifert, H. J.; Pfleging, W.
    2012. Laser-Based Micro- and Nanopackaging and Assembly VI : San Francisco, Calif., January 24-26, 2012
  2359. Laser adjusted three-dimensional Li-Mn-O cathode architectures for secondary lithium-ion cells
    Pröll, J.; Kohler, R.; Torge, M.; Bruns, M.; Przybylski, M.; Ulrich, S.; Seifert, H. J.; Pfleging, W.
    2012. Laser-Based Micro- and Nanopackaging and Assembly VI : San Francisco, Calif., January 24-26, 2012
  2360. Nanosecond and picosecond laser structuring of electrode materials for lithium-ion batteries
    Kohler, R.; Proell, J.; Besser, H.; Torge, M.; Scholz, S.; Dobrev, T.; Ulrich, S.; Pfleging, W.
    2012. Mobile Energy : Proc. of Symp. F of MRS Fall Meeting 2011, Boston, Mass., November 28 - December 2, 2011, mrsf11–1388-f08, MRS. doi:10.1557/opl.2012.1174
  2361. Influence of laser-generated surface structures on electrochemical performance of lithium cobalt oxide
    Kohler, R.; Proell, J.; Ulrich, S.; Przybylski, M.; Seifert, H. J.; Pfleging, W.
    2012. Laser-based micro- and nanopackaging and assembly VI : Proc.of Photonics West 2012, San Francisco, Calif., January 24-26, 2012. Ed.: F. Bachmann, 82440T/1–7, Society of Photo-optical Instrumentation Engineers (SPIE)
  2362. Laser adjusted three-dimensional Li-Mn-O cathode architectures for secondary lithium-ion cells
    Pröll, J.; Kohler, R.; Torge, M.; Bruns, M.; Przybylski, M.; Ulrich, S.; Seifert, H. J.; Pfleging, W.
    2012. Laser-based micro- and nanopackaging and assembly VI : Proc.of Photonics West 2012, San Francisco, Calif., January 24-26, 2012. Ed.: F. Bachmann, 82440S/1–10, Society of Photo-optical Instrumentation Engineers (SPIE)
  2363. Laser-based micro- and nanopackaging and assembly VI, San Francisco, Calif., January 24-26, 2012
    Bachmann, F. G.; Pfleging, W.; Washio, K.; Amako, J.; Hoving, W.; Lu, Y.
    2012. Society of Photo-optical Instrumentation Engineers (SPIE)
  2364. Optimierte Fertigungslogistik - Neuartige Elektrolytbefüllung für Lithium-Ionen-Zellen
    Wollersheim, O.; Pfleging, W.
    2012. ATZ-Elektronik, 7 (01), 52–55
  2365. Applications of dual beam SEM/FIB for microstructure analysis of refractory materials
    Jäntsch, U.; Klimenkov, M.; Rieth, M.; Scherer, T.
    2012. 7.FIB-Workshop, Dresden, 25.-27.Juni 2012
  2366. Experimental results of the QUENCH-16 bundle test on air ingress
    Stuckert, J.; Steinbrück, M.
    2012. Internat.Congress on the Advances in Nuclear Power Plants (ICAPP 12), Chicago, Ill., June 24-28, 2012
  2367. The impact of refractory material properties on the helium cooled divertor design
    Rieth, M.; Reiser, J.; Dafferner, B.; Baumgärtner, S.
    2012. Transactions of Fusion Science and Technology, 61, 381–384
  2368. TEM study of mechanically alloyed ODS steel powder
    Hoffmann, J.; Klimenkov, M.; Lindau, R.; Rieth, M.
    2012. Journal of Nuclear Materials, 428, 165–169. doi:10.1016/j.jnucmat.2011.09.034
  2369. Characterization of precipitates in nano structured 14% Cr ODS alloys for fusion application
    He, P.; Klimenkov, M.; Lindau, R.; Möslang, A.
    2012. Journal of Nuclear Materials, 428, 131–138. doi:10.1016/j.jnucmat.2011.08.026
  2370. Application of neutron radiography to study material processes during hypothetical severe accidents in nuclear reactors
    Große, M.; Steinbrück, M.; Stuckert, J.; Kastner, A.; Schillinger, B.
    2012. Journal of Materials Science, 47, 6505–6512. doi:10.1007/s10853-011-5553-1
  2371. Materials behavior during the early phase of a severe nuclear accident
    Steinbrück, M.
    2012. Diagnostics of Materials and Industrial Components : 4th Scientific and Technological Conf., Gdansk, PL, May 31 - June 2, 2012
  2372. Separate effects experiments in the framework of the QUENCH program at KIT
    Steinbrück, M.; Große, M.; Stuckert, J.
    2012. Final Seminar of the Phebus Programme, Aie-en-Provence, F, June 13-15, 2012
  2373. What happens during nuclear accidents? Contributions of neutron imaging to nuclear safety
    Große, M.; Kaestner, A.; Schillinger, B.
    2012. Neutron Imaging User Symposium (NIUS 2012), Bad Zurzach, CH, April 15-18, 2012
  2374. Analysis of the absorbed hydrogen in cladding tubes applied in the QUENCH-LOCA tests
    Grosse, M.; Rössger, K.; Stuckert, J.; Steinbrück, M.; Walter, M.; Klimenkov, M.; Kaestner, A.
    2012. Internat.Congress on the Advances in Nuclear Power Plants (ICAPP 12), Chicago, Ill., June 24-28, 2012
  2375. Which process occurring in the fuel cladding during nuclear accidents? Contributions of neutron imaging to nuclear safety
    Grosse, M.
    2012. Vortr.: Queens University, Kingston, CDN, 22.Juni 2012
  2376. Neutron radiography and tomography investigations of the secondary hydriding of Zry-4 during loss of cooland nuclear accidents
    Grosse, M. K.; Stuckert, J.; Steinbrück, M.; Kaestner, A. P.; Hartmann, S.
    2012. 7th Internat.Topical Meeting on Neutron Radiography (ITMNR-7), Kingston, CDN, June 16-24
  2377. High-temperature oxidation of zircaloy-4 (Zr-1.5Sn) in steam, oxygen, nitrogen and mixed atmospheres
    Steinbrück, M.
    2012. 8th Internat.Symp.on High-Temperature Corrosion and Protection of Materials (HTCPM 2012), Les Embiez, F, May 20-25, 2012
  2378. Study of boron behaviour in the primary circuit of water reactors under severe accident conditions: a comparison of Phebus FPT3 results with other recent integral and separate-effects data
    Haste, T.; Payot, F.; Dominguez, C.; March, P.; Simondi-Teisseire, B.; Steinbrück, M.
    2012. Nuclear Engineering and Design, 246, 147–156. doi:10.1016/j.nucengdes.2011.08.031
  2379. Thin film cathodes in the materials system Li-Mn-O for lithium-ion batteries
    Fischer, J.; Adelhelm, C.; Ziebert, C.; Stüber, M.; Ulrich, S.; Leiste, H.; Seifert, H. J.
    2012. Chancen der Energiewende : 1.Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 19.Juni 2012
  2380. Investigations of dissimilar electron beam welds on P91 and PM2000 steels
    Widak, V.; Dafferner, B.; Heger, S.; Rieth, M.
    2012. The Energy and Materials Research Conf. (EMR 2012), Torremolinos, E, June 20-22, 2012
  2381. In situ X-ray study of vanadium carbide
    Krause, B.; Darma, S.; Baumbach, T.; Stüber, M.; Ulrich, S.
    2012. Diffraction Analysis of the Microstructure of Materials : 6th Size-Strain Conf., Hyeres, Presqu’Ile de Giens, F, October 17-20, 2011
  2382. Microstructure of thin (V,Al)(C,N) hard coatings
    Darma, S.; Krause, B.; Doyle, S.; Stüber, M.; Ziebert, C.; Ulrich, S.; Baumbach, T.
    2012. Diffraction Analysis of the Microstructure of Materials : 6th Size-Strain Conf., Hyeres, Presqu’Ile de Giens, F, October 17-20, 2011
  2383. Investigation on different oxides as candidates for nano-sized ODS particles in reduced-activation ferritic (RAF) steels
    Hoffmann, J.
    2012. Ajou-KIT-Kyoto University Joint International Symp., Kyoto, J, January 31 - February 1, 2012
  2384. Investigation on different oxides as candidates for nano-sized ODS particles in reduced-activation ferritic (RAF) steels
    Hoffmann, J.; Rieth, M.; Lindau, R.; Klimenkov, M.; Möslang, A.; Zschommler Sandim, H. R.
    2012. 2nd Joint IAEA - EC Topical Meeting on Development of New Structural Materials for Advanced Fission and Fusion Reactor Systems, Ispra, I, April 16-20, 2012
  2385. Microstructural characterizations of hot rolled ferritic ODS alloys
    Hoffmann, J.
    2012. Materials for Fusion and Fission Group Seminar, University of Oxford, GB, March 30, 2012
  2386. Current status of the KIT ODS steel development programme
    Hoffmann, J.; Rieth, M.; Lindau, R.; Klimenkov, M.; Möslang, A.; Armstrong, D.; Britton, B.
    2012. KIT-CCFE Divertor Technology Workshop, Culham, GB, May 29, 2012
  2387. Refraktär-Laminate für die Energiewende
    Reiser, J.; Rieth, M.; Dafferner, B.; Widak, V.; Hoffmann, A.
    2012. Chancen der Energiewende : 1.Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 19.Juni 2012
  2388. Modular deposition chamber for in situ X-ray experiments during RF and DC magnetron sputtering
    Krause, B.; Darma, S.; Kaufholz, M.; Gräfe, H. H.; Ulrich, S.; Mantilla, M.; Weigel, R.; Rembold, S.; Baumbach, T.
    2012. Journal of Synchrotron Radiation, 19, 216–222. doi:10.1107/S0909049511052320
  2389. Powder injection molding (PIM) - a multi-purpose process for armor part fabrication and materials development
    Antusch, S.; Commin, L.; Müller, M.; Piotter, V.; Rieth, M.; Walter, H.; Weingärtner, T.
    2012. Vortr.: Universität Oxford, GB, 30.Mai 2012
  2390. QUENCH-LOCA program at KIT and results of the QUENCH-L0 bundle test
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2012. Jahrestagung Kerntechnik 2012, Stuttgart, 22.-24.Mai 2012
  2391. QUENCH-LOCA program at KIT and results of the QUENCH L0 bundle test
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2012. LOCA-Workshop, Lyon, F, May 29-30, 2012
  2392. W laminates and their possible use in divertor technology
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. KIT-CCFE Divertor Technology Workshop, Culham, GB, May 29, 2012
  2393. Divertor mockup testing - KIT plans for 2012-2013
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. KIT-CCFE Divertor Technology Workshop, Culham, GB, May 29, 2012
  2394. Basic divertor design studies
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. KIT-CCFE Divertor Technology Workshop, Culham, GB, May 29, 2012
  2395. Tribologisches Verhalten von Keramik/Metall-Friktionspaarungen mit lasertexturierter Wirkfläche unter ölgeschmierter, einsinniger Gleitbeanspruchung. PhD dissertation
    Wauthier, K.
    2012. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000028743
  2396. Fe₃₂Co₄₄Hf₁₂N₁₂/TiN multilayer coatings for non-contact high frequency sensor applications
    Krüger, K.; Seemann, K.; Leiste, H.; Stüber, M.; Ulrich, S.
    2012. 76. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Magnetismus, Berlin, D, 25.-30. März 2012 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.47(2012), MA 38.9
  2397. Composition and microstructure of r.f. magnetron sputter-deposited Cr-Zr-O thin films
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.
    2012. 76. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Dünne Schichten, Berlin, D, 25.-30. März 2012 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.47(2012), DS 26.4
  2398. The transmission of high-power microwaves via dielectric diamond windows: Design, qualification and first steps towards a broadband diamond window in the range of 30GHz to several THz for actual and future fusion devices
    Scherer, T. A.; Strauss, D.
    2012. 76. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Dielektrische Festkörper, Berlin, D, 25.-30. März 2012 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.47(2012), DF 17.7
  2399. Microwave radiation losses in surface modified CVD diamond
    Scherer, T. A.; Strauss, D.; Meier, A.; Nebel, C.
    2012. New Diamond and Nanocarbons Conf. (NDNC), San Juan, Costa Rica, May 20-24, 2012 Book of Abstracts
  2400. The transmission of high-power microwaves via diamond window: design, qualification and first steps towards a broadband diamond window in the range of 30 GHz to several THz
    Strauss, D.; Scherer, T. A.
    2012. New Diamond and Nanocarbons Conf. (NDNC), San Juan, Costa Rica, May 20-24, 2012 Book of Abstracts
  2401. ECRH on ASDEX upgrade. System status, feed-back control, plasma physics results
    Stober, J.; Reich, M.; Sommer, F.; Wagner, D.; Angioni, C.; Bock, A.; Giannone, L.; Herrmann, A.; Leuterer, F.; Maraschek, M.; Mlynek, A.; Monaco, F.; Müller, S.; Münich, M.; Poli, E.; Schubert, M.; Schütz, H.; Treutterer, W.; Zohm, H.; Meier, A.; Scherer, T.; Strauß, D.; Vaccaro, A.; Flamm, J.; Thumm, M.; Höhnle, H.; Kasparek, W.; Stroth, U.; Litvak, A.; Denisov, G. G.; Chirkov, A. V.; Tai, E. M.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Soluyanova, A.; Malygin, S. A.
    2012. 17th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-17), Deurne, NL, May 7-10. 2012 Book of Abstracts
  2402. Modeling of QUENCH-16 experiment with MAAP4 severe accident code
    Beuzet, E.; Steinbrück, M.; Stuckert, J.
    2012. Topical Meeting on Safety in Reactor Operations (TopSafe 2012), Helsinki, SF, April 22-26, 2012
  2403. Metallische Hochtemperaturwerkstoffe und deren mechanisch-technologische Prüfung
    Reiser, J.; Rieth, M.; Dafferner, B.
    2012. Metall Symp., Ulm, 22.Mai 2012
  2404. Impact of nitrogen on phase formation, microstructure and properties of reactively r.f. magnetron sputtered Cr-Zr-O-N thin films
    Spitz, S.; Stüber, M.; Leiste, H.; Ulrich, S.
    2012. Spring Meeting of the European Materials Research Society, Strasbourg, F, May 14-18, 2012
  2405. Progress of the ITER ECRH upper launcher development
    Strauss, D.; Aiello, G.; Brusci, A.; Chavan, R.; Farina, D.; Figini, L.; Goodman, T.; Heemskerk, C.; Henderson, M.; Kasparek, W.; Koning, J.; Landis, J. D.; Meier, A.; Moro, A.; Platania, P.; Plaum, B.; Poli, E.; Ramponi, G.; Ronden, D.; Saibene, G.; Sanchez, F.; Sauter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Vaccaro, A.; Zohm, H.
    2012. 17th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-17), Deurne, NL, May 7-10. 2012
  2406. CVD diamond Brewster window: feasibility study by FEM analysis
    Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2012. 17th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (2012), Deurne, Netherlands, May 7–10, 2012
  2407. Progress in the ITER electron cyclotron system development
    Henderson, M. A.; Darbos, C.; Albajar, F.; Alberti, S.; deBaar, M.; Baruah, U.; Becket, B.; Bigelow, T.; Bonicelli, T.; Bruschi, A.; Caughman, J.; Chavan, R.; Denisov, G.; Farina, D.; Fasel, D.; Gandini, F.; Gassman, T.; Goodman, T. P.; Hogge, J. P.; Jean, O.; Kajiwara, K.; Kasparek, W.; Kern, S.; Kobayashi, N.; Moro, A.; Nazare, C.; Oda, Y.; Omori, T.; Purohit, D.; Ramponi, G.; Rao, S. L.; Rasmussen, D.; Ronden, D.; Saibene, G.; Sakamoto, K.; Sauter, O.; Shapiro, M.; Scherer, T.; Singh, N. P.; Strauss, D.; Takahashi, K.; Temkin, R.; Zohm, H.
    2012. 17th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-17), Deurne, NL, May 7-10. 2012
  2408. Modeling of QUENCH-16 experiment with MAAP4 severe accident code
    Beuzet, E.; Steinbrück, M.; Stuckert, J.
    2012. Topical Meeting on Safety in Reactor Operations (TopSafe 2012 Transactions), Helsinki, SF, April 22-26, 2012, 265–271, European Nuclear Society
  2409. Investigation on different oxides as candidates for nano-sized oDS particles in reduced-activation ferritic (RAF) steels
    Hoffmann, J.
    2012. Materials for Fusion and Fission Group Seminar, University of Oxford, GB, March 30, 2012
  2410. Ductilisation of tungsten: tungsten laminate
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. Ajou-KIT-Kyoto University Joint International Symp., Kyoto, J, January 31 - February 1, 2012
  2411. Experiments of the LACOMECO project at KIT
    Miassoedov, A.; Kuznetsov, M.; Steinbrück, M.; Kudriakov, S.; Hozer, Z.; Kljenak, I.; Meignen, R.; Seiler, J. M.; Teodorczyk, A.
    2012. 5th European Review Meeting on Severe Accident Research (ERMSAR 2012), Köln, March 21-23, 2012, CD-ROM
  2412. On the fracture toughness of fine-grained Mo-3Si-1B (wt.%) alloys at ambient to elevated (1300⁰C) temperatures
    Lemberg, J. A.; Middlemas, M. R.; Weingärtner, T.; Gludovatz, B.; Cochran, J. K.; Ritchie, R. O.
    2012. Intermetallics, 20, 141–154. doi:10.1016/j.intermet.2011.09.003
  2413. Atom probe tomography of nanoscaled features of oxide-dispersion-strengthened ODS Eurofer steel in the initial state and after neutron irradiation
    Rogozhkin, S. V.; Aleev, A. A.; Zaluzhnyi, A. G.; Iskanderov, N. A.; Nikitin, A. A.; Vladimirov, P.; Lindau, R.; Möslang, A.
    2012. The physics of metals and metallography, 113 (1), 98–105. doi:10.1134/S0031918X12010103
  2414. Theoretic 3-D study of the high-frequency magnetic moment dynamics in thin ferromagnetic films with in-plane uniaxial anisotropy by considering eddy-current generation
    Seemann, K.; Leiste, H.; Krüger, K.
    2012. Journal of Magnetism and Magnetic Materials, 324, 1926–1932. doi:10.1016/j.jmmm.2012.01.042
  2415. On the comparison of the polarisation behaviour of exchange-biased AF/F NiMn/Fe₃₇Co₄₈Hf₁₅ bi-layer and multi-layer films with increased ferromagnetic cut-off frequencies
    Seemann, K.; Leiste, H.; Krüger, K.
    2012. Journal of Magnetism and Magnetic Materials, 324, 1165–1171. doi:10.1016/j.jmmm.2011.11.002
  2416. 3D structures in battery materials
    Pröll, J.; Kohler, R.; Mangang, A.; Ulrich, S.; Ziebert, C.; Pfleging, W.
    2012. Journal of Laser Micro/Nanoengineering, 7 (1), 97–104. doi:10.2961/jlmn.2012.01.0019
  2417. Diode laser heat treatment of lithium manganese oxide films
    Pröll, J.; Kohler, R.; Mangang, A.; Ulrich, S.; Bruns, M.; Seifert, H. J.; Pfleging, W.
    2012. Applied Surface Science, 258, 5146–5152. doi:10.1016/j.apsusc.2012.01.156
  2418. High-temperature oxidation in nuclear reactor systems
    Grosse, M.
    2012. Feron, D. [Hrsg.] Nuclear Corrosion Science and Engineering Oxford [u.a.] : Woodhead Publ., 2012 (Woodhead Publishing Series in Energy ; 22)
  2419. Thermal conductivity of highly neutron-irradiated beryllium in nuclear fusion reactors
    Chakin, V.; Reimann, J.; Moeslang, A.; Latypov, R.; Obukhov, A.
    2012. Progress in Nuclear Energy, 57, 2–7. doi:10.1016/j.pnucene.2011.11.011
  2420. Tungsten - an overview of general properties and possible structural applications in fusion power plants
    Rieth, M.
    2012. Challenges to Developing W-Based Materials for Fusion Applications, Santa Barbara, Calif., February 13-15, 2012
  2421. W laminate
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. Challenges to Developing W-Based Materials for Fusion Applications, Santa Barbara, Calif., February 13-15, 2012
  2422. Brazing / mockup fabrication / deep drawing
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. Challenges to Developing W-Based Materials for Fusion Applications, Santa Barbara, Calif., February 13-15, 2012
  2423. Comparative view on high-temperature oxidation of zirconium alloys in various atmospheres
    Steinbrück, M.
    2012. GfKORR-Arbeitskreis ’Korrosionsschutz bei erhöhten Temperaturen’, Frankfurt, 24.Januar 2012
  2424. Ductile tungsten (W) pipes for structural applications
    Reiser, J.; Rieth, M.; Möslang, A.; dafferner, B.; Hoffmann, A.; Schulmeyer, W.
    2012. Managing Intellectual Property, Dispute Prevention and Technology Transfer in Fusion, Barcelona, E, Novemebr 28-29, 2011
  2425. Tungsten foil laminate for structural divertor applications - basics and outlook
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2012. Journal of Nuclear Materials, 423, 1–8. doi:10.1016/j.jnucmat.2012.01.010
  2426. Experimental examination of the wear behaviour of the VAIN tool coating by strip drawing process
    Liewald, M.; Wagner, S.; Becker, D.; Ziebert, C.; Pesch, P.; Kolozsvari, S.
    2012. International Journal of Advanced Manufacturing Technology, 58, 495–501. doi:10.1007/s00170-011-3412-5
  2427. In-situ investigation of hydrogen diffusion in zircaloy-4 by means of neutron radiography
    Grosse, M.; den Berg, M. van; Goulet, C.; Kaestner, A.
    2012. Journal of Physics: Conference Series, 340, 0012106/1–8. doi:10.1088/1742-6596/340/1/012106
  2428. Secondary hydriding during LOCA - results from the QUENCH-L0 test
    Grosse, M.; Stuckert, J.; Steinbrück, M.; Kaestner, A.
    2012. Journal of Nuclear Materials, 420, 575–582. doi:10.1016/j.jnucmat.2011.11.045
  2429. Aufbau, Struktur und Eigenschaftsprofile von Viellagenschichtsystemen aus Tantal- oder Titannitriden mit Eisenkobaltlagen. PhD dissertation
    Klever, C.
    2012. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000026753
  2430. Oxidation behavior of Mo-Si-B-(X) alloys: Macro- and microalloying (X= Cr, Zr, La2O3)
    Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
    2011. JOM, 63 (12), 32–36. doi:10.1007/s11837-011-0203-2
  2431. High-Temperature Oxidation Behaviour of Co-Re-Cr-Based Alloys: Limitations and Ways to Improve
    Gorr, B.; Christ, H.-J.
    2011. Advanced Materials Research, 278, 545–550. doi:10.4028/www.scientific.net/AMR.278.545
  2432. Oxidation Performance of Mo‐Si‐B Alloys: Implications through Alloying and Pre‐Treatment
    Burk, S.; Gorr, B.; Christ, H.-J.
    2011. Supplemental Proceedings – Materials Processing and Energy Materials, 627–634, John Wiley and Sons. doi:10.1002/9781118062111.ch72
  2433. Metallic foam structures, dendrites and implementation optimizations for phase-field modeling
    Vondrous, A.; Nestler, B.; August, A.; Wesner, E.; Choudhury, A.; Hötzer, J.
    2011. High Performance Computing in Science and Engineering, Stuttgart, October 4-5, 2011
  2434. Simulation of heat propagation in open cell metal foams
    August, A.
    2011. Euromat 2011 : European Congress and Exhibition on Advanced Materials and Processes, Montpellier, F, September 12-15, 2011
  2435. Phase field simulations of heat propagation in open cell metal foam
    August, A.
    2011. Materials Research Society Spring Meeting, San Francisco, Calif., April 25-29, 2011
  2436. Phase-field study of the fragmentation secondary arm in Al-Cu alloys
    Wesner, E.; Choudhury, A.; August, A.; Berghoff, M.; Nestler, B.
    2011. Euromat 2011 : European Congress and Exhibition on Advanced Materials and Processes, Montpellier, F, September 12-15, 2011
  2437. Anisotropic lattice changes and ferromagnetic order in Sr₁₋ₓCaₓRuO₃
    Wissinger, M.; Fuchs, D.; Dieterle, L.; Leiste, H.; Schneider, R.; Gerthsen, D.; Löhneysen, H. von
    2011. Physical Review B, 83 (14), 144430/1–9. doi:10.1103/PhysRevB.83.144430
  2438. The effect of a homogenizing optic on residual stresses and shear strength of laser brazed ceramic/steel-joints
    Südmeyer, I.; Besser, H.; Grein, M.; Liesching, B.; Rohde, M.; Schneider, J.
    2011. Laser-based micro- and nanopackaging and assembly V, San Francisco, California, United States, 25 - 27 January 2011. Ed.: W. Pfleging, 792108/1–8, Society of Photo-optical Instrumentation Engineers (SPIE)
  2439. Work package No.1: Irradiation damage - advanced characterization and modelling
    Commin, L.
    2011. FabriCharMe GOT Program Progress Meeting, Karlsruhe, November 14, 2011
  2440. Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties
    Commin, L.; Dumont, M.; Rotinat, R.; Pierron, F.; Masse, J. E.; Barrallier, L.
    2011. Materials Science and Engineering A, 528, 2049–2055. doi:10.1016/j.msea.2010.11.061
  2441. Contribution of Tore Supra in preparation of ITER
    Saoutic, B.; Abiteboul, J.; Allegretti, L.; Allfrey, S.; Ane, J. M.; Aniel, T.; Argouarch, A.; Artaud, J. F.; Aumenier, M. H.; Balme, S.; Basiuk, V.; Baulaigue, O.; Bayetti, P.; Becoulet, A.; Becoulet, M.; Benkadda, M. S.; Benoit, F.; Berger-by, G.; Bernard, J. M.; Bertrand, B.; Beyer, P.; Bigand, A.; Blum, J.; Boilson, S.; Bonhomme, G.; Bottollier-Curtet, H.; Bouchand, C.; Bouquey, F.; Bourdelle, C.; Bourmaud, S.; Brault, C.; Bremond, S.; Brosset, C.; Bucalossi, J.; Buravand, Y.; Cara, P.; Catherine-Dumont, V.; Casati, A.; Chantant, M.; Chatelier, M.; Chevet, G.; Ciazynski, D.; Ciraolo, G.; Clairet, F.; Coatanea-Gouchet, M.; Colas, L.; Commin, L.; Corbel, E.; Corre, Y.; Courtois, X.; Dachicourt, R.; Dapena Febrer, M.; Davi Joanny, M.; Daviot, R.; Esch, H. de; Decker, J.; Decool, P.; Delaporte, P.; Delchambre, E.; Delmas, E.; Delpech, L.; Desgranges, C.; Devynck, P.; Dittmar, T.; Doceul, L.; Douai, D.; Dougnac, H.; Duchateau, J. L.; Dugue, B.; Dumas, N.; Dumont, R.; Durocher, A.; Duthoit, F. X.; Ekedahl, A.; Elbeze, D.; El Khaldi, M.; Escourbiac, F.; Faisse, F.; Falchetto, G.; Farge, M.; Farjon, J. L.; Faury, M.; Fedorczak, N.; Fenzi-Bonizec, C.; Firdaouss, M.; Frauel, Y.; Garbet, X.; Garcia, J.; Gardarein, J. L.; Gargiulo, L.; Garibaldi, P.; Gauthier, E.; Gaye, O.; Geraud, A.; Geynet, M.; Ghendrih, P.; Giacalone, I.; Gibert, S.; Gil, C.; Giruzzi, G.; Goniche, M.; Grandgirard, V.; Grisolia, C.; Gros, G.; Grosman, A.; Guigon, R.; Guilhem, D.; Guillerminet, B.; Guirlet, R.; Gunn, J.; Gurcan, O.; Hacquin, S.; Hatchressian, J. C.; Hennequin, P.; Hernandez, C.; Hertout, P.; Heuraux, S.; Hillairet, J.; Hoang, G. T.; Honore, C.; Houry, M.; Hutter, T.; Huynh, P.; Huysmans, G.; Imbeaux, F.; Joffrin, E.; Johner, J.; Jourd’heuil, L.; Katharria, Y. S.; Keller, D.; Kim, S. H.; Kocan, M.; Kubic, M.; Lacroix, B.; Lamaison, V.; Latu, G.; Lausenaz, Y.; Laviron, C.; Leroux, F.; Letellier, L.; Lipa, M.; Litaudon, X.; Loarer, T.; Lotte, P.; Madeleine, S.; Magaud, P.; Maget, P.; Magne, R.; Manenc, L.; Marandet, Y.; Marbach, G.; Marechal, J. L.; Marfisi, L.; Martin, C.; Martin, G.; Martin, V.; Martinez, A.; Martins, J. P.; Masset, R.; Mazon, D.; Mellet, N.; Mercadier, L.; Merle, A.; Meshcheriakov, D.; Meyer, O.; Million, L.; Missirlian, M.; Mollard, P.; Moncada, V.; Monier-Garbet, P.; Moreau, D.; Moreau, P.; Morini, L.; Nannini, M.; Naiim Habib, M.; Nardon, E.; Nehme, H.; Nguyen, C.; Nicollet, S.; Nouilletas, R.; Ohsako, T.; Ottaviani, M.; Pamela, S.; Parrat, H.; Pastor, P.; Pecquet, A. L.; Pegourie, B.; Peysson, Y.; Porchy, I.; Portafaix, C.; Preynas, M.; Prou, M.; Raharijaona, J. M.; Ravenel, N.; Reux, C.; Reynaud, P.; Richou, M.; Roche, H.; Roubin, P.; Sabot, R.; Saint-Laurent, F.; Salasca, S.; Samaille, F.; Santagiustina, A.; Sarazin, Y.; Semerok, A.; Schlosser, J.; Schneider, M.; Schubert, M.; Schwander, F.; Segui, J. L.; Selig, G.; Sharma, P.; Signoret, J.; Simonin, A.; Song, S.; Sonnendruker, E.; Sourbier, F.; Spuig, P.; Tamain, P.; Tena, M.; Theis, J. M.; Thouvenin, D.; Torre, A.; Travere, J. M.; Tsitrone, E.; Vallet, J. C.; Plas, E. van der; Vatry, A.; Verger, J. M.; Vermare, L.; Villecroze, F.; Villegas, D.; Volpe, R.; Vulliez, K.; Wagrez, J.; Wauters, T.; Zani, L.; Zarzoso, D.; Zou, X. L.
    2011. Nuclear Fusion, 51, 090104/1–12. doi:10.1088/0029-5515/51/9/094014
  2442. Review on the EFDA work programme on nano-structured ODS RAF steels
    Baluc, N.; Boutard, J. L.; Dudarev, S. L.; Rieth, M.; Brito Correia, J.; Fournier, B.; Henry, J.; Legendre, F.; Leguey, T.; Lewandowska, M.; Lindau, R.; Marquis, E.; Munoz, A.; Radiguet, B.; Oksiuta, Z.
    2011. Journal of Nuclear Materials, 417, 149–153. doi:10.1016/j.jnucmat.2010.12.065
  2443. Microstructure of oxide dispersion strengthened Eurofer and iron-chromium alloys investigated by means of small-angle neutron scattering and transmission electron microscopy
    Heintze, C.; Bergner, F.; Ulbricht, A.; Hernandez-Mayoral, M.; Keiderling, U.; Lindau, R.; Weissgärber, T.
    2011. Journal of Nuclear Materials, 416, 35–39. doi:10.1016/j.jnucmat.2010.11.102
  2444. Tensile and fracture toughness properties of the nanostructured oxide dispersion strengthened ferritic alloy 13Cr-1W-0.3Ti-0.3Y₂O₃
    Eiselt, C. C.; Klimenkov, M.; Lindau, R.; Möslang, A.; Odette, G. R.; Yamamoto, T.; Gragg, D.
    2011. Journal of Nuclear Materials, 417, 193–196. doi:10.1016/j.jnucmat.2010.12.066
  2445. Mechanical and microstructural characterization of electron beam welded reduced activation oxide dispersion strengthened - Eurofer steel
    Lindau, R.; Klimenkov, M.; Jäntsch, U.; Möslang, A.; Commin, L.
    2011. Journal of Nuclear Materials, 416, 22–29. doi:10.1016/j.jnucmat.2011.01.025
  2446. Development of welding technologies for the manufacturing of European tritium breeder blanket modules
    Poitevin, Y.; Aubert, P.; Diegele, E.; Dinechin, G. de; Rey, J.; Rieth, M.; Rigal, E.; Weth, A. von der; Boutard, J. L.; Tavassoli, F.
    2011. Journal of nuclear materials, 417, 36–42. doi:10.1016/j.jnucmat.2010.12.259
  2447. Deep drawing of tungsten plates for structural divertor applications in future fusion devices
    Reiser, J.; Rieth, M.; Dafferner, B.; Baumgärtner, S.; Ziegler, R.; Hoffmann, A.
    2011. Fusion engineering and design, 86, 2049–2953. doi:10.1016/j.fusengdes.2011.07.011
  2448. Synthesis of Al-Cr-O-N thin films in corundum and f.c.c. structure by reactive r.f. magnetron sputtering
    Stueber, M.; Diechle, D.; Leiste, H.; Ulrich, S.
    2011. Thin solid films, 519, 4025–4031. doi:10.1016/j.tsf.2011.01.144
  2449. Influence of impurities on the fracture behavior of tungsten
    Gludovatz, B.; Wurster, S.; Weingärtner, T.; Hoffmann, A.; Pippan, R.
    2011. Philosophical Magazine, 91 (22), 3006–3020. doi:10.1080/14786435.2011.558861
  2450. Development of magnetic nanoactuator systems
    Hartbaum, J.; Jakobs, P.; Leiste, H.; Kohl, M.
    2011. Microelectronic Engineering, 88 (8), 2263–2266. doi:10.1016/j.mee.2011.01.053
  2451. The effects of temperature on crack propagation in Bcc iron
    Borodin, V. A.; Vladimirov, P. V.; Moeslang, A.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2452. Ab initio static and molecular dynamics studies of helium behavior in beryllium
    Vladimirov, P. V.; Moeslang, A.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2453. Molecular dynamics simulations of quasi-brittle crack development in iron
    Borodin, V. A.; Vladimirov, P. V.
    2011. Journal of Nuclear Materials, 415, 320–328. doi:10.1016/j.jnucmat.2011.04.052
  2454. Modeling of yttrium, oxygen atoms and vacancies in γ-iron lattice
    Gopejenko, A.; Zhukovskii, Y. F.; Vladimirov, P. V.; Kotomin, E. A.; Möslang, A.
    2011. Journal of Nuclear Materials, 416, 40–44. doi:10.1016/j.jnucmat.2010.11.088
  2455. Three-dimensional atomistic modelig of microcrack propagation in iron
    Borodin, V. A.; Vladimirov, P. V.
    2011. Journal of Nuclear Materials, 416, 49–54. doi:10.1016/j.jnucmat.2010.12.224
  2456. Towards in situ-process control in tribological or tool applications: A material concept for the design of smart thin film wear sensors
    Ulrich, S.; Klever, C.; Leiste, H.; Seemann, K.; Stüber, M.
    2011. NATO Advanced Study Institute on Nanotechnological Basis for Advanced Sensors, Sozopol, BG, May 30 - June 11, 2011
  2457. Deposition and high temperature stability of reactively magnetron sputtered Al-Cr-O and Al-Cr-O-N thin films
    Diechle, D.; Cavaleiro, A.; Leiste, H.; Schier, V.; Stueber, M.; Ulrich, S.
    2011. 38th Internat.Conf.on Metallurgical Coatings & Thin Films (ICMCTF 2011), San Diego, Calif., May 2-6, 2011 Book of Abstracts 410
  2458. Large scale deposition of TiC/a-C nanocomposite coatings by magnetron sputtering using nocel ceramic compound targets
    Stueber, M.; Ulrich, S.; Leiste, H.; Polcik, P.; O’Sullivan, M.
    2011. 38th Internat.Conf.on Metallurgical Coatings & Thin Films (ICMCTF 2011), San Diego, Calif., May 2-6, 2011
  2459. Towards in situ-process control in tribological or tool applications: A material concept for the design of smart thin film wear sensors
    Ulrich, S.; Klever, C.; Leiste, H.; Seemann, K.; Stüber, M.
    2011. Reithmaier, J.P. [Hrsg.] Nanotechnological Basis for Advanced Sensors : Proc.of theNATO Advanced Study Institute on Nanotechnological Basis for Advanced Sensors, Sozopol, BG, May 30 - June 11, 2011 Dordrech, NL : Springer Science and Business Media B.V., 2011 (NATO Science for Peace and Security Series : Series B: Pbysics and Biophysics), 519–527
  2460. Investigation of the initial growth of ultrananocrystalline diamond films by multiwavelength Raman spectroscopy
    Kulisch, W.; Popov, C.; Rauscher, H.; Rinke, M.; Veres, M.
    2011. Diamond and Related Materials, 20, 1076–1080. doi:10.1016/j.diamond.2011.03.042
  2461. Thermal stability in oxidative and protective environments of a-C:H cap layer on a functional gradient coating
    Louro, C.; Wagner Moura, C.; Carvalho, N.; Stueber, M.; Cavaleiro, A.
    2011. Diamond and Related Materials, 20, 57–63. doi:10.1016/j.diamond.2010.11.010
  2462. Study of helium bubble evolution in highly neutron-irradiated beryllium by using X-ray micro tomography and metallography methods
    Chakin, V.; Rolli, R.; Moeslang, A.; Kurinskiy, P.; Vladimirov, P.; Ferrero, C.; Pieritz, R.; Renterghem, W. van
    2011. Physica Scripta, T145, 014012/1–6. doi:10.1088/0031-8949/2011/T145/014012
  2463. Microstructure-property correlation of 13.5%Cr nanostructured ODS steels for fusion application
    He, P.; Klimenkov, M.; Lindau, R.; Möslang, A.
    2011. 1st Internat.Workshop on Dispersion Strengthened Steels for Advanced Nuclear Applications (DIANA I), Aussois, April 4-8, 2011
  2464. Neutron radiography: a powerful tool for fast, quantitative and non-destructive determination of hydrogen concentration and distribution in zirconium alloys
    Grosse, M.
    2011. Journal of ASTM International, 8 (4), 575–591. doi:10.1520/JAI103251
  2465. W-based alloys for advanced divertor designs: options and environmental impact of state-of-the-art alloys
    El-Guebaly, L.; Kurtz, R.; Rieth, M.; Kurishita, H.; Robinson, A.
    2011. (ARIES Team., Ed.) Fusion Science and Technology, 60, 185–189
  2466. Generierung offenporiger metallischer Schaumstrukturen zur Simulation der Wärmeübertragungseigenschaften
    Rölle, M.; August, A.; Selzer, M.; Nestler, B.
    2011. Forschung aktuell, 2011, 21–23
  2467. Analysis of thermal evolution in textile fabrics using advanced microstructure simulation techniques
    Römmelt, M.; August, A.; Nestler, B.; Kneer, A.
    2011. 5th Internat.Conf.on Textile Composites and Inflatable Structures (Structural Membranes 2011), Barcelona, E, October 5-7, 2011
  2468. Hydrogen diffusion under stress concentration applied to DHC: a feasibility study using neutron
    Valance, S.; Grosse, M.; Bertsch, J.; Kaestner, A.
    2011. 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011
  2469. Neutron radiography investigations to study the material behaviour in loss of coolant nuclear accidents
    Grosse, M.; Kaestner, A.
    2011. 2nd Joint Users’ Meeting @ PSI, Villigen, CH, September 15-16, 2011
  2470. Neutron radiography investigations of the hydrogen uptake of fuel cladding tubes during LOCA and severe accidents
    Grosse, M.
    2011. IAEA CRP Meeting, Beijing, China, September 19-23, 2011
  2471. Combined ferromagnetic and mechanical properties of Fe₃₂Co₄₄Hf₁₂N₁₂/TiN multilayer coatings for high frequency sensor applications
    Krueger, K.; Stueber, M.; Seemann, K.; Keiste, H.
    2011. European School on Magnetism, Targoviste, R, August 22 - September 2, 2011
  2472. Analysis of thermal evolution in textile fabrics using advanced microstructure simulation techniques
    Römmelt, M.; August, A.; Nestler, B.; Kneer, A.
    2011. 5th Internat.Conf.on Textile Composites and Inflatable Structures (Structural Membranes 2011), Barcelona, E, October 5-7, 2011. Ed.: E. Onate, 614–626
  2473. Hydrogen diffusion under stress concentration applied to DHC: a feasibility study using neutron
    Valance, S.; Grosse, M.; Bertsch, J.; Kaestner, A.
    2011. Steinbrück, M. [Hrsg.] Proc.of the 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011 CD-ROM Karlsruhe : Karlsruhe Inst.of Technology, Campus North, 2011 urn:nbn:de:0005-900129
  2474. Inovative Methoden zur Auslegung von Umformwerkzeugen im Fahrzeugbau (IMAUF)
    Roll, K.; Bogon, P.; Ziebert, C.
    2011. Düsseldorf : VDI-Verl., 2011 (Fortschritt-Berichte VDI : Reihe 2: Fertigungstechnik ; 679)
  2475. Offenporige metallische Schäume
    August, A.; Nestler, B.; Kneer, A.; Wendler, F.; Rölle, M.; Selzer, M.
    2011. Werkstoffe in der Fertigung, 2011 (6), 45–46
  2476. Thermodynamic modeling in nuclear related materials systems
    Seifert, H. J.
    2011. 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011
  2477. Thermodynamic modeling in nuclear related materials systems
    Seifert, H. J.
    2011. Steinbrück, M. [Hrsg.] Proc.of the 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011 CD-ROM Karlsruhe : Karlsruhe Inst.of Technology, Campus North, 2011 urn:nbn:de:0005-900129
  2478. Experimental results of the QUENCH-16 bundle tests on air ingress, performed within the framework of the LACOMECO project
    Stuckert, J.; Hozer, Z.; Moch, J.; Rössger, C.; Stegmaier, U.; Steinbrück, M.
    2011. Steinbrück, M. [Hrsg.] Proc.of the 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011 CD-ROM Karlsruhe : Karlsruhe Inst.of Technology, Campus North, 2011 urn:nbn:de:0005-900129
  2479. Experimental parameters influencing the amount of hydrogen absorbed in Zr alloys during steam oxidation
    Grosse, M.
    2011. 17th Internat.QUENCH-Workshop, Karlsruhe, November 22-24, 2011
  2480. Update of the QUENCH program
    Steinbrück, M.; Stuckert, J.; Große, M.; Walter, M.
    2011. 17th Internat.QUENCH-Workshop, Karlsruhe, November 22-24, 2011
  2481. Recent results of KIT separate-effect tests on oxidation of zirconium alloy cladding
    Steinbrück, M.; Gerhards, U.; Große, M.; Leiste, H.; Prestel, S.; Stegmaier, U.
    2011. 17th Internat.QUENCH-Workshop, Karlsruhe, November 22-24, 2011
  2482. High temperature reaction of α-Zr(O) with nitrogen
    Steinbrück, M.; Jung, M.
    2011. Internat.Congress on Advances in Nuclear Power Plants (ICAPP 2011), Nice, F, May 2-5, 2011
  2483. Separate-effects tests on high-temperature behavior of zircaloy-2
    Steinbrück, M.
    2011. 3rd Meeting of the Programme Review Group of the OECD-NEA SFP Project, Albuquerque, N.M., May 15-16, 2011
  2484. Verhalten von Hüllrohrmaterialien bei Large Break LOCA (QUENCH-LOCA test series)
    Steinbrück, M.; Stuckert, J.; Große, M.; Walter, M.
    2011. Workshop ’Status VGB Schwerpunktförderung’, E.ON Hannover, 27.Oktober 2011
  2485. Comparative view on high-temperature oxidation of zirconium alloys in various atmospheres
    Steinbrück, M.
    2011. Seizing the Opportunity: Nuclear’s Bright Future : ANS Annual Meeting, Hollywood, Fla., June 26-30, 2011
  2486. Experimental parameters influencing the amount of hydrogen absorbed in Zr alloys during steam oxidation
    Grosse, M.
    2011. Steinbrück, M. [Hrsg.] Proc.of the 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011 CD-ROM Karlsruhe : Karlsruhe Inst.of Technology, Campus North, 2011 urn:nbn:de:0005-900129
  2487. Update of the QUENCH program
    Steinbrück, M.; Stuckert, J.; Große, M.; Walter, M.
    2011. Steinbrück, M. [Hrsg.] Proc.of the 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011 CD-ROM Karlsruhe : Karlsruhe Inst.of Technology, Campus North, 2011 urn:nbn:de:0005-900129
  2488. Recent results of KIT separate-effect tests on oxidation of zirconium alloy cladding
    Steinbrück, M.; Gerhards, U.; Große, M.; Leiste, H.; Prestel, S.; Stegmaier, U.
    2011. Steinbrück, M. [Hrsg.] Proc.of the 17th Internat.QUENCH Workshop, Karlsruhe, November 22-24, 2011 CD-ROM Karlsruhe : Karlsruhe Inst.of Technology, Campus North, 2011 urn:nbn:de:0005-900129
  2489. High temperature reaction of α-Zr(O) with nitrogen
    Steinbrück, M.; Jung, M.
    2011. Internat.Congress on Advances in Nuclear Power Plants (ICAPP 2011), Nice, F, May 2-5, 2011 Proc.on CD-ROM Paper 11395 Paris : SFEN, 2011
  2490. Oxidation of advanced zirconium cladding alloys in steam at temperatures in the range of 600-1200 ⁰ C
    Steinbrück, M.; Ver, N.; Große, M.
    2011. Oxidation of Metals, 76, 215–232. doi:10.1007/s11085-011-9249-3
  2491. Air oxidation of zircaloy-4, M5 and ZIRLOsup(T)sup(M) cladding alloys at high temperatures
    Steinbrück, M.; Böttcher, M.
    2011. Journal of Nuclear Materials, 414, 276–285. doi:10.1016/j.jnucmat.2011.04.012
  2492. Nanoscale PVD multilayer coatings
    Ziebert, C.; Stüber, M.; Leiste, H.; Ulrich, S.; Holleck, H.
    2011. Buschow, K.H. [Hrsg.] Encyclopedia of Materials : Science and Technology Amsterdam [u.a.] : Elsevier Online Update 2011. doi:10.1016/B978-0-08-043152-9.02267-3
  2493. Rasterelektronenmikroskopische Untersuchungen von Barytkristallen nach Fällung aus solinarem Modell-Geothermalwasser - zur Reduzierung von Barytscaling in geothermischen Anlagen
    Wolfgramm, M.; Rauppach, K.; Seibt, A.; Müller, K.; Canic, T.; Baur, S.; Adelhelm, C.
    2011. Geothermiekongress, Bochum, 15.-17.November 2011 Tagungsband auf CD-ROM Berlin : GtV bundesverband Geothermie e.V., 2011
  2494. Kinetik von Barytausfällungen aus Geothermalwasser. Einfluss der Scherung
    Canic, T.; Baur, S.; Adelhelm, C.; Seibt, A.; Müller, K.; Rauppach, K.; Wolfgramm, M.
    2011. Geothermiekongress, Bochum, 15.-17.November 2011 Tagungsband auf CD-ROM Berlin : GtV bundesverband Geothermie e.V., 2011
  2495. Surface Plasmon Polariton Absorption Modulator
    Melikyan, A.; Lindenmann, N.; Walheim, S.; Leufke, P. M.; Ulrich, S.; Ye, J.; Vincze, P.; Hahn, H.; Schimmel, T.; Koos, C.; Freude, W.; Leuthold, J.
    2011. Optics Express, 19 (9), 8855–8869. doi:10.1364/OE.19.008855
  2496. In-situ investigation of hydrogen diffusion in zircaloy-4 by means of neutron radiography
    Grosse, M.; den Berg, M. van; Kaestner, A.; Schillinger, B.
    2011. 5th European Conf.on Neutron Scattering (ECNS 2011), Praha, CZ, July 17-22, 2011
  2497. Nitriding behavior of nickel-based superalloys at 1273 K and above
    Grosse, M.; Sporn, M.; Menden, M.
    2011. Internat.Congress on Advances in Nuclear Power Plants (ICAPP 2011), Nice, F, May 2-5, 2011
  2498. Secondary hydriding during LOCA - results from the QUENCH-L0 test
    Grosse, M.; Stuckert, J.; Steinbrück, M.; Kaestner, A.
    2011. European Materials Research Society Bilateral Energy Conf., Nice, F, May 9-13, 2011
  2499. Nitriding behavior of nickel-based superalloys at 1273 K and above
    Grosse, M.; Sporn, M.; Menden, M.
    2011. Internat.Congress on Advances in Nuclear Power Plants (ICAPP 2011), Nice, F, May 2-5, 2011 Proc.on CD-ROM Paper 11036 Paris : SFEN, 2011
  2500. International tungsten development efforts and the gas cooled divertor design
    Rieth, M.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2501. Tungsten - Properties, possible and impossible applications
    Rieth, M.
    2011. Institutsseminar, Karlsruher Institut für Technologie, 8.Dezember 2011
  2502. Assessment of the physics and technology requirements for a fusion DEMO
    Wolf, R. C.; Aktaa, J.; Antusch, S.; Biel, W.; Boccaccini, L. V.; Bornschein, B.; Brezinsek, S.; Cismondi, F.; Day, C.; Demange, D.; Fantz, U.; Fietz, W.; Franzen, P.; Gantenbein, G.; Ghidersa, B. E.; Giegerich, T.; Gunter, S.; Hauer, V.; Heller, R.; Hesch, K.; Igitkhanov, Y.; Kallenbach, A.; Kern, S.; Knitter, R.; Konig, R.; Konys, J.; Koslowski, H. R.; Lackner, K.; Landman, I.; Lehnen, M.; Lietzow, R.; Linke, J.; Linsmeier, C.; Meister, H.; Mertens, P.; Mittwollen, M.; Moslang, A.; Neubauer, O.; Noe, M.; Norajitra, P.; Noterdaeme, J. M.; Pautasso, G.; Phillips, V.; Reiter, D.; Rieth, M.; Roth, J.; Tardini, G.; Treutterer, W.; Schauer, F.; Schlachter, S.; Strauß, D.; Unterberg, B.; Weiss, K.; You, J. H.; Zohm, H.
    2011. Integration of Fusion Science and Technology for Steady State Operation : 21st Internat.Toki Conf., Toki City, Gifu, J, November 28 - December 1, 2011
  2503. Scherfestigkeit und tribologisches Verhalten von lasergelöteten Keramik-Stahl-Verbunden
    Schneider, J.; Südmeyer, I.; Rohde, M.
    2011. Abschlusskolloquium des Sonderforschungsbereichs 483 ’Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe’, Karlsruhe, 25.Oktober 2011
  2504. The effect of a homogenizing optic on residual stresses and shear strength of laser brazed ceramic/steel-joints
    Südmeyer, I.; Rohde, M.; Besser, H.; Grein, M.; Liesching, B.; Schneider, J.
    2011. Laser-Based Micro- and Nanopackaging and Assembly V : San Francisco, Calif., January 25-27, 2011
  2505. Investigations on thermal, mechanical and tribological properties of ceramic/steel joints
    Südmeyer, I.; Schneider, J.; Rohde, M.
    2011. 12th Conf.of the European Ceramic Society, Stockholm, S, June 19-23, 2011
  2506. Residual stresses and shear strength of laser brazed Al₂O₃/steel-joints
    Südmeyer, I.; Liesching, B.; Härtelt, M.; Rohde, M.
    2011. 12th Conf.of the European Ceramic Society, Stockholm, S, June 19-23, 2011
  2507. Review of the EFDA programme on tungsten materials technology and science
    Rieth, M.; Boutard, J. L.; Dudarev, S. L.; Ahlgren, T.; Antusch, S.; Baluc, N.; Barthe, M. F.; Becquart, C. S.; Ciupinski, L.; Correia, J. B.; Domain, C.; Fikar, J.; Fortuna, E.; Fu, C. C.; Gaganidze, E.; Galan, T. L.; Garcia-Rosales, C.; Gludovatz, B.; Greuner, H.; Heinola, K.; Holstein, N.; Juslin, N.; Koch, F.; Krauss, W.; Kurzydlowski, K. J.; Linke, J.; Linsmeier, C.; Luzginova, N.; Maier, H.; Martinez, M. S.; Missiaen, J. M.; Muhammed, M.; Munoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Norajitra, P.; Opschoor, J.; Pintsuk, G.; Pippan, R.; Ritz, G.; Romaner, L.; Rupp, D.; Schäublin, R.; Schlosser, J.; Uytdenhouwen, I.; Laan, J. G. van der; Veleva, L.; Ventelon, L.; Wahlberg, S.; Willaime, F.; Wurster, S.; Yar, M. A.
    2011. Journal of Nuclear Materials, 417, 463–467. doi:10.1016/j.jnucmat.2011.01.075
  2508. Synthesis of Al-Cr-O and Al-Cr-O-N thin films in corundum-type structure by reactive r.f. magnetron sputtering
    Stüber, M.; Diechle, D.; Leiste, H.; Ulrich, S.
    2011. American Vacuum Society 58th Internat.Symp.and Exhibition, Nashville, Tenn., October 30 - November 4, 2011 Book of Abstracts
  2509. Magnetron sputtered nanocrystalline metastable (V,Al)(C,N) hard coatings
    Stüber, M.; Ulrich, S.; Leiste, H.; Holleck, H.
    2011. Surface and Coatings Technology, 206, 610–616. doi:10.1016/j.surfcoat.2011.07.052
  2510. Combinatorial approach to the growth of α-(Al₁₋ₓ,Crₓ)₂₊sub(δ)(O₁₋sub(y),Nsub(y))₃ solid solution strengthened thin films by reactive r.f. magnetron sputtering
    Diechle, D.; Stueber, M.; Leiste, H.; Ulrich, S.
    2011. Surface and Coatings Technology, 206, 1545–1551. doi:10.1016/j.surfcoat.2011.06.052
  2511. Nanocrystalline Ti₂sub(/)₃Sn₁sub(/)₃O₂ as anode material for Li-ion batteries
    Issac, I.; Scheuermann, M.; Becker, S. M.; Bardaji, E. G.; Adelhelm, C.; Wang, D.; Kübel, C.; Indris, S.
    2011. Journal of Power Sources, 196, 9689–9695. doi:10.1016/j.jpowsour.2011.07.046
  2512. Technology developments at KIT towards a magnetic confinement fusion power plant
    Hesch, K.; Aktaa, J.; Antusch, S.; Boccaccini, L. V.; Day, C.; Demange, D.; Fietz, W.; Gantenbein, G.; Möslang, A.; Norajitra, P.; Rieth, M.
    2011. 15th Internat.Conf.on Emerging Nuclear Energy Systems (ICENES 2011), San Francisco, Calif., May 15-19, 2011
  2513. Laser-induced conical micro structures on thin film model electrodes and tape cast electrode materials
    Pfleging, W.; Proell, J.; Bruns, M.; Ulrich, S.; Kohler, R.
    2011. 11th Internat.Conf.on Laser Ablation, Playa del Carmen, Cancun, MEX, November 13-19, 2011 Book of Abstracts
  2514. Ductile tungsten (W) pipes for structural applications
    Reiser, J.; Rieth, M.; Dafferner, B.; Möslang, A.; Schlulmeyer, W.; Hoffmann, A.
    2011. Conf.on Intellectual Property, Dispute Prevention and Technology Transfer, Barcelona, E, November 28-29, 2011
  2515. Structural design and analysis of an ECRH launcher for JET
    Späh, P.; Vaccaro, A.; Aiello, G.; Giruzzi, G.; Lennholm, M.; Sozzi, C.; Strauss, D.
    2011. 38th IEEE Internat.Conf.on Plasma Science (ICOPS) and 24th Symp.on Fusion Engineering (SOFE), Chicago, Ill., June 26-30, 2011 Proc.publ.online Piscataway, N.J. : IEEE, 2011 Paper, P3–17. doi:10.1109/SOFE.2011.6052319
  2516. Investigation of microwave and THz radiation losses in CVD diamond and chemically modified diamond
    Scherer, T.; Strauss, D.; Meier, A.; Mathis, Y. L.; Judin, V.; Müller-Sebert, W.; Smirnov, W.; Nebel, C.
    2011. Materials Research Society Fall Meeting 2010, Boston, Mass., November 29 - December 3, 2010 Diamond Electronics and Bioelectronics : Fundamentals to Applications IV ; Proc.of Symp.A of MRS Fall Meeting 2010, Boston, Mass., November 29 - December 3, 2010 Warrendale, Pa. : MRS, 2011 mrsf10-1282-a15-01 (Materials Research Society Symposium Proceedings ; 1282). doi:10.1557/opl.2011.452
  2517. Experimental results of the QUENCH-16 bundle tests on air ingress, performed within the framework of the LACOMECO project
    Stuckert, J.; Hozer, Z.; Moch, J.; Rössger, C.; Stegmaier, U.; Steinbrück, M.
    2011. 17th Internat.QUENCH-Workshop, Karlsruhe, November 22-24, 2011
  2518. Effect of the heat-induced corrosion on the mechanical behavior of EUROFER97 derived by instrumented indentations
    Sacksteder, I.; Cherville, J. H.; Weingärtner, T.; Trouillet, V.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2519. Comparison microstructural investigation of neutron irradiated Eurofer-97 and ODS Eurofer-97 steel
    Coppola, R.; Klimenkov, M.; Lindau, R.; Möslang, A.; Valli, M.; Wiedenmann, A.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2520. Microstrutural response on high temperature low cycle fatigue of ODS Eurofer and 13.5% Cr ODS steels
    He, P.; Klimenkov, M.; Lindau, R.; Möslang, A.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2521. Microstructural and mechanical characterization of friction stir welded reduced activation Eurofer and Eurofer-ODS steels
    Lindau, R.; Klimenkov, M.; Jäntsch, U.; Möslang, A.; Bergmann, L.; Staron, P.; Fischer, T.; Santos, J. F. dos
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2522. Characterization of radiation induced defects in EUROFER 97 after neutron irradiation
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.
    2011. Journal of Nuclear Materials, 417, 124–126. doi:10.1016/j.jnucmat.2010.12.261
  2523. TEM study of hydrogen-containing precipitates in Al-containing ODS steel
    Klimenkov, M.
    2011. Journal of Nuclear Materials, 417, 197–200. doi:10.1016/j.jnucmat.2010.12.070
  2524. Mechanical properties and TEM examination of RAFM steels irradiated up to 70 dpa in BOR-60
    Gaganidze, E.; Petersen, C.; Materna-Morris, E.; Dethloff, C.; Weiß, O. J.; Aktaa, J.; Povstyanko, A.; Fedoseev, A.; Makarov, O.; Prokhorov, V.
    2011. Journal of Nuclear Materials, 417, 93–98. doi:10.1016/j.jnucmat.2010.12.047
  2525. Quantitative measurement of argon inside of nano-sized bubbles in ODS steels
    Klimenkov, M.
    2011. Journal of Nuclear Materials, 411, 160–162. doi:10.1016/j.jnucmat.2011.01.104
  2526. Charakterisierung von Scherfestigkeit und tribologischem Verhalten lasergefügter Keramik/Stahl-Verbunde im Hinblick auf den Einsatz in PKW-Trockenkupplungen
    Südmeyer, I.; Rohde, M.; Schneider, J.
    2011. Abschlusskolloquium Sonderforschungsbereich 483 "Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe", 25. Oktober 2011, Kongresszentrum Karlsruhe. Hrsg.: A. Albers, 141–150, KIT Scientific Publishing
  2527. Kinetik von Barytausfällungen aus Geothermalwasser. Einfluss der Scherung
    Canic, T.; Baur, S.; Adelhelm, C.; Seibt, A.; Müller, K.; Rauppach, K.; Wolfgramm, M.
    2011. Geothermiekongress, Bochum, 15.-17.November 2011
  2528. Rasterelektronenmikroskopische Untersuchungen von Barytkristallen nach Fällung aus salinarem Modell-Geothermalwasser - zur Reduzierung von Barytscaling in geothermischen Anlagen
    Wolfgramm, M.; Rauppach, K.; Seibt, A.; Müller, K.; Canic, T.; Baur, S.; Adelhelm, C.
    2011. Geothermiekongress, Bochum, 15.-17.November 2011
  2529. XPS and ToFSIMS characterization of laser modified films for Li-ion battery cathodes
    Bruns, M.; Kohler, R.; Proell, J.; Pfleging, W.
    2011. American Vacuum Society 58th Internat.Symp.and Exhibition, Nashville, Tenn., October 30 - November 4, 2011
  2530. Experimental results of the commissioning bundle test QUENCH-L0 performed in the framework of the QUENCH-LOCA program
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2011. Internat.Congress on Advances in Nuclear Power Plants (ICAPP 2011), Nice, F, May 2-5, 2011 Proc.on CD-ROM Paper 11226 Paris : SFEN, 2011
  2531. Influence of deposition temperature and bias voltage on the crystalline phase of Er₂O₃ thin films deposited by filtered cathodic arc
    Adelhelm, C.; Pickert, T.; Koch, F.; Balden, M.; Jahn, S.; Rinke, M.; Maier, H.
    2011. Journal of Nuclear Materials, 417, 798–801. doi:10.1016/j.jnucmat.2010.12.163
  2532. High Performance Computations of Monte Carlo Radiation Transport for ITER Fusion Neutronics
    Serikov, A.; Fischer, U.; Grosse, D.; Leichtle, D.; Strauss, D.
    2011. Computational Methods in Science and Engineering - Proceedings of the Workshop SimLabs@KIT, November 29 - 30, 2010, Karlsruhe, Germany. Ed.: I. Kondov, 135–148, KIT Scientific Publishing
  2533. Characterization and optimization of a nanoscale ferritic oxide-dispersion-strengthened (ODS) alloy
    Hoffmann, J.; Klimenkov, M.; Lindau, R.; Rieth, M.
    2011. Fusion PhD Seminar, Bad Herrenalb, 27.-28.Juni 2011
  2534. TEM study of mechanically alloyed ODS powder
    Hoffmann, J.; Klemenkov, M.; Lindau, R.; Rieth, M.
    2011. 1st Internat.Workshop on Dispersion Strengthened Steels for Advanced Nuclear Applications (DIANA I), Aussois, April 4-8, 2011
  2535. Mechanical and microstructural characterization of different oxides for oxide dispersion-strengthened (ODS) steels
    Hoffmann, J.; Lindau, R.; Rieth, M.
    2011. Evolution of Metals Structures : Modeling, Characterization and Design ; Gordon Research Conf.Physical Metallurgy, Easton, Mass., July 31- August 5, 2011
  2536. Microstructural and tritium release examination of titanium beryllides
    Chakin, V.; Klimenkov, M.; Rolli, R.; Kurinskiy, P.; Moeslang, A.; Dorn, C.
    2011. Journal of Nuclear Materials, 417, 769–774. doi:10.1016/j.jnucmat.2010.12.142
  2537. Tungsten for structural divertor parts
    Reiser, J.; Rieth, M.; Dafferner, B.
    2011. Fusion PhD Seminar, Bad Herrenalb, 27.-28.Juni 2011
  2538. Development of high performance materials for nuclear fusion power plants
    Rieth, M.
    2011. 2nd Brazilian-German Frontiers of Science and Technology Symp.2011, Potsdam, September 8-11, 2011
  2539. Influence of thickness and notch on impact bending properties of pure tungsten plate material
    Reiser, J.; Rieth, M.; Dafferner, B.; Hoffmann, A.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2540. Optimization and limitations of known DEMO divertor concepts
    Reiser, J.; Rieth, M.
    2011. 10th Internat.Symp.on Fusion Nuclear Technology (ISFNT 2011), Portland, Oreg., September 11-16, 2011
  2541. Review on the EFDA programme on tungsten materials
    Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2542. Neutronic analyses for the upper ports in the neutral beam cell of ITER
    Serikov, A.; Fischer, U.; Grosse, D.; Loughlin, M. J.; Majerle, M.; Schreck, S.; Spaeh, P.; Strauss, D.
    2011. Fusion Science and Technology, 69, 708–714
  2543. Evolution of shielding computations for the ITER upper ECH launcher
    Serikov, A.; Fischer, U.; Grosse, D.; Spaeh, P.; Strauss, D.
    2011. Nuclear Technology, 175, 238–250
  2544. Comparative study of fusion relevant properties of Be₁₂V and Be₁₂Ti
    Kurinskiy, P.; Moeslang, A.; Chakin, V.; Rolli, R.; Alves, E.; Alves, L. C.; Franco, N.; Dorn, C.; Goraieb, A. A.
    2011. 26th Symp.on Fusion Technology (SOFT 2010), Porto, P, September 27 - October 1, 2010
  2545. Low cycle fatigue behavior of EUROFER97-steel after 16.3 dpa neutron irradiation at 250, 350 and 450⁰C
    Materna-Morris, E.; Möslang, A.; Schneider, H. C.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2546. Microstructural characterisation of boron alloyed EUROFER 97 after neutron irradiation
    Klimenkov, M.; Materna-Morris, E.; Möslang, A.; Schneider, H. C.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2547. Tritiumpermeation, retention and release properties of beryllium pebbles
    Chakin, V.; Möslang, A.; Kurinskiy, P.; Rolli, R.; Schneider, H. C.; Alves, E.; Alves, L. C.
    2011. 26th Symp.on Fusion Technology (SOFT 2010), Porto, P, September 27 - October 1, 2010
  2548. TEM study of irradiation induced copper precipitation in the presence of helium
    Klimenkov, M.; Materna-Morris, E.; Vladimiriov, P.; Möslang, A.; Schneider, H. C.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2549. Tritium release and retention properties of highly neutron irradiated beryllium pebbles from HIDOBE-01 experiment
    Chakin, V.; Moeslang, A.; Vladimirov, P.; Kurinskiy, P.; Rolli, R.; Schneider, H. C.; Til, S. van; Hegeman, J. B. J.; Zmitko, M.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2550. Effect of 16.3 dpa neutron irradiation on fatigue lifetime of the RAFM steel EUROFER97
    Materna-Morris, E.; Möslang, A.; Rolli, R.; Schneider, H. C.
    2011. Fusion Engineering and Design, 86, 2607–2610. doi:10.1016/j.fusengdes.2011.03.060
  2551. Comparative study of fusion relevant properties of Be₁₂V and Be₁₂Ti
    Kurinskiy, P.; Chakin, V.; Moeslang, A.; Rolli, R.; Alves, E.; Alves, L. C.; Franco, N.; Dorn, C.; Goraieb, A. A.
    2011. Fusion Engineering and Design, 86, 2454–2457. doi:10.1016/j.fusengdes.2010.12.065
  2552. Pores and cracks in highly neutron irradiated beryllium
    Chakin, V.; Rolli, R.; Schneider, H. C.; Moeslang, A.; Kurinskiy, P.; Renterghem, W. van
    2011. Journal of Nuclear Materials, 416, 3–8. doi:10.1016/j.jnucmat.2010.11.098
  2553. Tritium permeation, retention and release properties of beryllium pebbles
    Chakin, V.; Möslang, A.; Kurinskiy, P.; Rolli, R.; Schneider, H. C.; Alves, E.; Alves, L. C.
    2011. Fusion Engineering and Design, 86, 2338–2342. doi:10.1016/j.fusengdes.2011.01.091
  2554. Determining irradiation damage and recovery by instrumented indentation in RAFM steel
    Sacksteder, I.; Schneider, H. C.; Materna-Morris, E.
    2011. Journal of Nuclear Materials, 417, 127–130. doi:10.1016/j.jnucmat.2011.02.012
  2555. Effect of the heat-induced corrosion on the mechanical behavior of EUROFER97 derived by instrumented indentations
    Sacksteder, I.; Cherville, J. H.; Weingärtner, T.; Trouillet, V.
    2011. 7th Internat.Workshop on Direct and Inverse Problems in Piezoelectricity, Oer-Erkenschwick, October 4-7, 2011
  2556. Approach of a new testing method on the basis of Eurofer-Eurofer welding joints
    Scherwitz, M.; Schneider, H. C.; Materna-Morris, E.; Aktaa, J.
    2011. Workshop on Ion Implantation as a Neutron Irradiation Analogue, Oxford, GB, September 26-28, 2011
  2557. Experimental analysis of the inserted waveguide CVD diamond window prototype for the ITER ECRH upper launcher
    Scherer, T. A.; Meier, A.; Strauss, D.; Schreck, S.; Takahashi, K.; Kajiwara, K.; Oda, Y.; Sakamoto, K.; Saibene, G.
    2011. 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011
  2558. Grooved CVD diamond windows: grooves’ profiles and structural simulations
    Vaccaro, A.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Späh, P.; Strauss, D.; Stober, J.; Wagner, D.; Denisov, G. G.; Wit, H. G. M. de
    2011. US-EU-JPN RF Heating Technology Workshop, Austin, Tex., October 10-12, 2011
  2559. Recent upgrades of the ITER ECRH launcher double wall structure and the new CVD torus diamond window design II
    Scherer, T. A.; Strauss, D.; Vaccaro, A.; Aiello, G.; Schreck, S.; Meier, A.; Späh, P.; Takahashi, K.; Kajiwara, K.; Oda, Y.; Sakamoto, K.
    2011. US-EU-JPN RF Heating Technology Workshop, Austin, Tex., October 10-12, 2011
  2560. Multi-frequency ECRH system at ASDEX upgrade status and activities
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Schubert, M.; Schütz, H.; Zohm, H.; Erckmann, V.; Thumm, M.; Scherer, T.; Strauss, D.; Meier, A.; Gantenbein, G.; Flamm, J.; Kasparek, W.; Höhnle, H.; Lechte, C.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Petelin, M. I.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, V. E.
    2011. (ASDEX Upgrade Team, Ed.), US-EU-JPN RF Heating Technology Workshop, Austin, Tex., October 10-12, 2011
  2561. Grooved CVD diamond windows: grooves’ profiles and structural simulations
    Vaccaro, A.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Späh, P.; Strauss, D.; Stober, J.; Wagner, D.; Wit, H. G. M. de
    2011. 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011
  2562. Dielectric properties of natural grown Tourmaline at 100 GHz
    Scherer, T. A.; Meier, A.; Landmann, A.
    2011. 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011
  2563. Manufacturing studies of double wall components for the ITER EC H&CD upper launcher
    Späh, P.; Aiello, G.; Kleefeldt, K.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, d.; Vaccaro, A.; Serikov, A.; Goldmann, A.; Kroiss, A.; Obermeier, C.
    2011. 10th Internat.Symp.on Fusion Nuclear Technology (ISFNT 2011), Portland, Oreg., September 11-16, 2011
  2564. The ITER EC H&CD upper launcher: structural design
    Spaeh, P.; Aiello, G.; Baar, M. de; Chavan, R.; Elzendoorn, B.; Goodman, T.; Henderson, M.; Kleefeldt, K.; Landis, J. D.; Meier, A.; Ronden, D.; Saibene, G.; Scherer, T.; Schreck, S.; Serikov, A.; Strauss, D.; Vaccaro, A.
    2011. 26th Symp.on Fusion Technology (SOFT 2010), Porto, P, September 27 - October 1, 2010
  2565. TEM study of irradiation induced copper precipitation in boron alloyed EUROFER97 steel
    Klimenkov, M.; Vladimirov, P.; Möslang, A.; Materna-Morris, E.; Schneider, H. C.
    2011. International Journal of Materials Research, 102, 1089–1093. doi:10.3139/146.110570
  2566. The ITER EC H&CD upper launcher: structural design
    Spaeh, P.; Aiello, G.; Baar, M. de; Chavan, R.; Elzendoorn, B.; Goodman, T.; Henderson, M.; Kleefeldt, K.; Landis, J. D.; Meier, A.; Ronden, D.; Saibene, G.; Scherer, T.; Schreck, S.; Serikov, A.; Strauss, D.; Vaccaro, A.
    2011. Fusion Engineering and Design, 86, 724–727. doi:10.1016/j.fusengdes.2011.03.115
  2567. The ITER EC H&CD upper launcher: transient mechanical analysis
    Vaccaro, A.; Aiello, G.; Kleefeldt, K.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.
    2011. 26th Symp.on Fusion Technology (SOFT 2010), Porto, P, September 27 - October 1, 2010
  2568. Outgassing measurements for the ITER EC H&CD upper launcher
    Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2011. Symposium on Fusion Technology (SOFT 2010), Porto, Portugal, September 27–October 1, 2010
  2569. The ITER EC H&CD upper launcher: transient mechanical analysis
    Vaccaro, A.; Aiello, G.; Kleefeldt, K.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.
    2011. Fusion Engineering and Design, 86, 851–854. doi:10.1016/j.fusengdes.2011.01.073
  2570. Overview of the ITER EC H&CD system and its capabilities
    Omori, T.; Henderson, M. A.; Albajar, F.; Alberti, S.; Baruah, U.; Bigelow, T.; Beckett, B.; Bertizzolo, R.; Bonicelli, T.; Bruschi, A.; Caughman, J.; Chavan, R.; Cirant, S.; Collazos, A.; Cox, D.; Darbos, C.; Baar, M. R. de; Denisov, G.; Farina, D.; Gandini, F.; Gassmann, T.; Goodman, T. P.; Heidinger, R.; Hogge, J. P.; Illy, S.; Jean, O.; Jin, J.; Kajiwara, K.; Kasparek, W.; Kasugai, A.; Kern, S.; Kobayashi, N.; Kumric, H.; Landis, J. D.; Moro, A.; Nazare, C.; Oda, Y.; Pagonakis, I.; Piosczyk, B.; Platania, P.; Plaum, B.; Poli, E.; Porte, L.; Purohit, D.; Ramponi, G.; Rao, S. L.; Rasmussen, D. A.; Ronden, D. M. S.; Rzesnicki, T.; Saibene, G.; Sakamoto, K.; Sanchez, F.; Scherer, T.; Shapiro, M.; Sozzi, C.; Spaeh, P.; Strauss, D.; Sauter, O.; Takahashi, K.; Temkin, R.; Thumm, M.; Tran, M. Q.; Udintsev, V.; Zohm, H.
    2011. Fusion Engineering and Design, 86, 951–954. doi:10.1016/j.fusengdes.2011.02.040
  2571. Outgassing measurements for the ITER EC H&CD upper launcher
    Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2011. Fusion Engineering and Design, 86, 2474–2477. doi:10.1016/j.fusengdes.2011.01.128
  2572. Development and qualification of functional materials for the EU test blanket modules: strategy and R&D activities
    Zmitko, M.; Poitevin, Y.; Boccaccini, L.; Salavy, J. F.; Knitter, R.; Möslang, A.; Magielsen, A. J.; Hegemann, J. B. J.; Lässer, R.
    2011. Journal of Nuclear Materials, 417, 678–683. doi:10.1016/j.jnucmat.2011.02.009
  2573. Laser-assisted surface engineering of thin film electrode materias for lithium-ion batteries
    Pfleging, W.; Kohler, R.; Scholz, S.; Ziebert, C.; Proell, J.
    2011. Lu, Y. [Hrsg.] Laser-Material Interactions at Micro/Nanoscales : Proc.of Symp.TT of MRS Spring Meeting 2011, San Francisco, Calif., April 25-29, 2011 Warrendale, Pa. : MRS, 2011 mrss11-1365-tt05-02 (Materials Research Society Symposium Proceedings ; 1365). doi:10.1557/opl.2011.1317
  2574. In-situ neutron radiography investigations of hydrogen diffusion and absorption in zirconium alloys
    Grosse, M.; den Berg, M. van; Goulet, C.; Lehmann, E.; Schillinger, B.
    2011. Nuclear Instruments and Methods in Physics Research A, 651, 253–257. doi:10.1016/j.nima.2010.12.070
  2575. Wavelength dependent neutron transmission and radiography investigations of the high temperature behaviour of materials applied in nuclear fuel and control rod claddings
    Grosse, M.; Steinbrück, M.; Kaestner, A.
    2011. Nuclear Instruments and Methods in Physics Research A, 651, 315–319. doi:10.1016/j.nima.2011.02.102
  2576. QUENCH-LOCA program at KIT and results of the QUENCH L0 bundle test
    Stuckert, J.; Große, M.; Steinbrück, M.; Walter, M.
    2011. HI Temp Conf.2011, Boston, Mass., September 20-22, 2011
  2577. Investigations of microwave absorption of surface modified CVD diamond disks for fusion applications
    Scherer, T. A.; Strauss, D.; Schreck, S.; Meier, A.; Müller-Sebert, W.; Nebel, C.
    2011. 22nd European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes and Nitrides (DIAMOND 2011), Garmisch-Partenkirchen, September 4-8, 2011
  2578. CVD diamond torus windows for ITER ECRH prototype design and experimental investigations
    Schreck, S.; Scherer, T. A.; Strauss, D.; Meier, A.; Sakomoto, K.; Takahashi, K.; Kajiwara, K.; Oda, Y.; Saibene, G.
    2011. 8th Internat.Workshop ’Strong Microwaves and Terahertz Waves : Sources and Applications’, Nizhny Novgorod, Russia, July 9-16, 2011 Proc. Nizhny Novgorod : Russian Academy of Sciences, 2011, 335–336
  2579. Conceptual design of an ECRH system for JET
    JET EFDA Contributors; Sozzi, C.; Giruzzi, G.; Lennholm, M.; Parkin, A.; Aiello, G.; Bellinger, M.; Bird, J.; Bouquey, F.; Braune, H.; Bruschi, A.; Butcher, P.; Clay, R.; Luna, E. de la; Denisov, G.; Edlington, T.; Fanthome, J.; Farina, D.; Farthing, J.; Figini, L.; Garavaglia, S.; Garcia, J.; Gardener, M.; Gerbaud, T.; Granucci, G.; Hay, H.; Henderson, M.; Hotchin, S.; Ilyin, V. N.; Jennison, M.; Kasparek, W.; Khilar, P.; Kirneva, N.; Kislov, D.; Knipe, S.; Kuyanov, A.; Litaudon, X.; Litvak, A. G.; Moro, A.; Nowak, S.; Parail, V.; Plau, B.; Saibene, G.; Späh, P.; Strauss, D.; Trukhina, E.; Vaccaro, A.; Vagdama, A.; Vdovin, V.
    2011. Proceedings of the 8th Internat.Workshop ’Strong Microwaves and Terahertz Waves : Sources and Applications’. Ed.: N. Novgorod, 163–164, Russian Academy of Sciences (RAS)
  2580. Laser microstructuring and annealing processes for lithium manganese oxide cathodes
    Pröll, J.; Kohler, R.; Torge, M.; Ulrich, S.; Ziebert, C.; Bruns, M.; Seifert, H. J.; Pfleging, W.
    2011. Applied Surface Science, 257, 9968–9976. doi:10.1016/j.apsusc.2011.06.117
  2581. Experimental and calculation results of the integral reflood test QUENCH-15 with ZIRLOsup(T)sup(M) cladding tubes in comparison with results of previous QUENCH tests
    Stuckert, J.; Birchley, J.; Große, B.; Jaeckel, B.; Steinbrück, M.
    2011. Nuclear Engineering and Design, 241, 3224–3233. doi:10.1016/j.nucengdes.2011.05.004
  2582. Present status of the 24 MW 170 GHz ITER EC H & D system
    Henderson, M.; Albajar, F.; Alberti, S.; Baruah, U.; Bigelow, T.; Becket, B.; Bertizzolo, R.; Bonicelli, T.; Bruschi, A.; Caughman, J.; Chavan, R.; Cirant, S.; Darbos, C.; deBaar, M.; Denisov, G.; Farina, D.; Gandini, F.; Gassmann, T.; Goodman, T. P.; Heidinger, R.; Hogge, J. P.; Kajiwara, K.; Kasparak, W.; Kasugai, A.; Kern, S.; Kobayashi, N.; Landis, J. D.; Li, F.; Litvak, A.; Moro, A.; Myasnikov, V.; Nazare, C.; Oda, J.; Omori, T.; Pagonakis, I.; Parmar, D.; Peters, B.; Platania, P.; Plaum, B.; Poli, E.; Porte, L.; Piosczyk, B.; Purohit, D.; Ramponi, G.; Rao, S. L.; Rasmussen, D.; Ronden, D.; Saibene, G.; Sakamoto, K.; Sanchez, F.; Scherer, T.; Schreck, S.; Singh, N. P.; Shapiro, M.; Sozzi, C.; Spaeh, P.; Strauss, D.; Sauter, O.; Tai, E.; Takahashi, K.; Temkin, R.; Thomas, P.; Thumm, M.; Zohm, H.
    2011. 8th Internat.Workshop ’Strong Microwaves and Terahertz Waves : Sources and Applications’, Nizhny Novgorod, Russia, July 9-16, 2011 Proc. Nizhny Novgorod : Russian Academy of Sciences, 2011, 21–22
  2583. Laser modification and characterization of Li-Mb-O thin film cathodes for lithium-ion batteries
    Pröll, J.; Kohler, R.; Adelhelm, c.; Bruns, M.; Torge, M.; Heißler, S.; Przybylski, M.; Ziebert, C.; Pfleging, W.
    2011. Laser-Based Micro- and Nanopackaging and Assembly V, San Francisco, Calif., January 25-27, 2011
  2584. Laser processing of SnO₂ electrode materials for manufacturing of 3D micro-batteries
    Kohler, R.; Proell, J.; Ulrich, S.; Przybylski, M.; Pfleging, W.
    2011. Laser-Based Micro- and Nanopackaging and Assembly V : San Francisco, Calif., January 25-27, 2011
  2585. 3D structures in battery materials
    Pfleging, W.; Kohler, R.; Bruns, M.; Ziebert, C.; Proell, J.
    2011. 12th Internat.Symp.on Laser Precision Microfabrication (LPM 2011), Takamatsu, J, June 7-10, 2011 Book of Abstracts
  2586. Laser modification and characterization of Li-Mb-O thin film cathodes for lithium-ion batteries
    Pröll, J.; Kohler, R.; Adelhelm, c.; Bruns, M.; Torge, M.; Heißler, S.; Przybylski, M.; Ziebert, C.; Pfleging, W.
    2011. Pfleging, W. [Hrsg.] Laser-Based Micro- and Nanopackaging and A sembly V : Proc.of Photonics West 2011, San Francisco, Calif., January 25-27, 2011 Bellingham, Wash.: SPIE, 2011 Q/1-14 (Proceedings of SPIE ; 7921) Also publ.online, 79210
  2587. Laser processing of SnO₂ electrode materials for manufacturing of 3D micro-batteries
    Kohler, R.; Proell, J.; Ulrich, S.; Przybylski, M.; Pfleging, W.
    2011. Pfleging, W. [Hrsg.] Laser-based micro- and nanopackaging and assembly V : Proc.of Photonics West 2011, San Francisco, Calif., January 25-27, 2011 Bellingham, Wash.: SPIE, 2011 P/1-11 (Proceedings of SPIE ; 7921) Also publ.online, 79210
  2588. Laser-based micro- and nanopackaging and assembly V
    Pfleging, W.; Lu, Y.; Washio, K.; Amako, J.; Hoving, W.
    2011. Proc.of Photonics West 2011, San Francisco, Calif., January 25-27, 2011 Bellingham, Wash.: SPIE, 2011 (Proceedings of SPIE ; 7921) Also publ.online
  2589. High performance computations of Monte Carlo radiation transport for ITER fusion neutronics
    Serikov, A.; Fischer, U.; Grosse, D.; Leichtle, D.; Strauss, D.
    2011. Workshop SimLabs @ KIT, Karlsruhe, November 29-30, 2010
  2590. Hocheistungswerkstoffe für den Fusionsreaktor
    Möslang, A.
    2011. Physikalisches Kolloquium, Friedrich-Schiller-Universität, Jena, 10Januar 2011
  2591. Annealing effects on microstructure and coercive field of ferritic-martensitic ODS Eurofer steel
    Renzetti, R. A.; Sandim, H. R. Z.; Sandim, M. J. R.; Santos, A. D.; Möslang, A.; Raabe, D.
    2011. Materials Science and Engineering A, 528, 1442–1447. doi:10.1016/j.msea.2010.10.051
  2592. Recent applications of small-angle neutron scattering in the characterization of irradiated steels for nuclear technologies
    Coppola, R.; Klimenkov, M.; Lindau, R.; Möslang, A.; Valli, M.; Wiedenmann, A.
    2011. Journal of Nuclear Materials, 409, 100–105. doi:10.1016/j.jnucmat.2010.09.012
  2593. Atom probe characterization of nano-scaled features in irradiated ODS Eurofer steel
    Rogozhkin, S. V.; Aleev, A. A.; Zaluzhnyi, A. G.; Nikitin, A. a.; Iskandarov, N. A.; Vladimirov, P.; Lindau, R.; Möslang, A.
    2011. Journal of Nuclear Materials, 409, 94–99. doi:10.1016/j.jnucmat.2010.09.021
  2594. Investigation of oxide particles in unirradiated ODS Eurofer by tomographic atom probe
    Aleev, A. A.; Iskandarov, N. A.; Klimenkov, M.; Lindau, R.; Möslang, A.; Nikitin, A. A.; Rogozhkin, S. V.; Vladimirov, P.; Zaluzhnyi, A. G.
    2011. Journal of Nuclear Materials, 409, 65–71. doi:10.1016/j.jnucmat.2010.09.008
  2595. Combinatorial approach for the development of solid state electrolytes in the system Li-V-Si-O for thin film Li-ion batteries
    Ziebert, C.; Knorr, A.; Thiel, N.; Fischer, J.; Kohler, R.; Pröll, J.; Pfleging, W.; Ulrich, S.; Seifert, H. J.
    2011. Lithium Batteries Discussion 2011, Arcachon, F, June 12-17, 2011
  2596. Combinatorial approach for the development of solid state electrolytes in the system Li-V-Si-O for thin film Li-ion batteries
    Ziebert, C.; Knorr, A.; Thiel, N.; Fischer, J.; Kohler, R.; Pröll, J.; Pfleging, W.; Ulrich, S.; Seifert, H. J.
    2011. Lithium Batteries Discussion 2011, Arcachon, F, June 12-17, 2011 Extendet Abstracts publ.in the web
  2597. Composition, microstructure and mechanical properties of boron-containing multilayer coatings for hot forming tools
    Paschke, H.; Stüber, M.; Ziebert, C.; Bistron, M.; Mayrhofer, P.
    2011. Surface and coatings technology / Supplement, 205 (2), S24-S28. doi:10.1016/j.surfcoat.2011.04.097
  2598. Ion bombardment-induced nanocrystallization of magnetron-sputtered chromium carbide thin films
    Ziebert, C.; Ye, J.; Stüber, M.; Ulrich, S.; Edinger, M.; Barzen, I.
    2011. Surface and Coatings Technology, 205, 4844–4849. doi:10.1016/j.surfcoat.2011.04.080
  2599. Structural design and analysis of an ECRH launcher for JET
    Späh, P.; Vaccaro, A.; Aiello, G.; Giruzzi, G.; Lennholm, M.; Sozzi, C.; Strauss, D.
    2011. 38th IEEE Internat.Conf.on Plasma Science (ICOPS) and 24th Symp.on Fusion Engineering (SOFE), Chicago, Ill., June 26-30, 2011
  2600. Conceptual design of an ECRH system for JET
    JET EFDA Contributors; Sozzi, C.; Giruzzi, G.; Lennholm, M.; Parkin, A.; Aiello, G.; Bellinger, M.; Bird, J.; Bouquey, F.; Braune, H.; Bruschi, A.; Butcher, P.; Clay, R.; Luna, E. de la; Denisov, G.; Edlington, T.; fanthome, J.; Farina, d.; Farthing, J.; Figini, L.; Garavaglia, S.; Garcia, J.; Gardener, M.; Gerbaud, T.; Granucci, G.; Hay, H.; Henderson, M.; Hotchin, S.; Ilyin, V. N.; Jennison, M.; Kasparek, W.; Khilar, P.; Kirneva, N.; Kislov, D.; Knipe, S.; Kuyanov, A.; Litaudon, X.; Litvak, A. G.; Moro, A.; Nowak, S.; Parail, V.; Plau, B.; Saibene, G.; Späh, P.; Strauss, D.; Trukhina, E.; Vaccaro, A.; Vagdama, A.; Vdovin, V.
    2011. 8th International Workshop ’Strong Microwaves and Terahertz Waves : Sources and Applications’ (2011), St Petersburg, Russia, July 9–16, 2011
  2601. Validation of the mechanical alloying process of ODS steel powder
    Hoffmann, J.; Klimenkov, M.; Lindau, R.; Rieth, M.
    2011. Jahrestagung Kerntechnik, Berlin, 17.-19.Mai 2011 Berlin : INFORUM GmbH, 2011 CD-ROM
  2602. Validation of the mechanical alloying process of ODS steel powder
    Hoffmann, J.; Klimenkov, M.; Lindau, R.; Rieth, M.
    2011. Jahrestagung Kerntechnik, Berlin, 17.-19.Mai 2011 Berlin : INFORUM GmbH, 2011 CD-ROM
  2603. Experimental results of the commissioning bundle test QUENCH-L0 performed in the framework of the QUENCH-LOCA program
    Stuckert, J.; Große, M.; Rössger, C.; Steinbrück, M.; Walter, M.
    2011. Internat.Congress on Advances in Nuclear Power Plants (ICAPP 2011), Nice, F, May 2-5, 2011
  2604. Cross sections for proton-induced reactions on Pd isotopes at energies relevant for the γ process
    Dillmann, I.; Coquard, L.; Domingo-Pardo, C.; Käppeler, F.; Marganiec, J.; Uberseder, E.; Giesen, U.; Heiske, A.; Feinberg, G.; Hentschel, D.; Hilpp, S.; Leiste, H.; Rauscher, T.; Thielemann, F. K.
    2011. Physical Review C, 84, 015802/1–11. doi:10.1103/PhysRevC.84.015802
  2605. Structural and functional materials
    Aktaa, J.; Rieth, M.; Knitter, R.; Konys, J.; Landman, I.; You, J. H.; Linsmeier, C.; Linke, J.; Mertens, P.
    2011. Follow-up Workshop on R&D Towards DEMO, IPP Garching, May 2-3, 2011
  2606. Preliminary design of the ITER ECH upper launcher
    Strauss, D.; Aiello, G.; Chavan, R.; Cirant, S.; deBaar, M.; Farina, D.; Gantenbein, G.; Goodman, T.; Henderson, M. A.; Kasparek, W.; Kleefeldt, K.; Landis, J. D.; Meier, A.; Moro, A.; Plaum, B.; Poli, E.; Ramponi, G.; Ronden, D.; Saibene, G.; Sanchez, F.; Sautter, O.; Scherer, T.; Schreck, S.; Serikov, A.; Sozzi, C.; Spaeh, P.; Vaccaro, A.; Zohm, H.
    2011. 38th IEEE Internat.Conf.on Plasma Science (ICOPS) and 24th Symp.on Fusion Engineering (SOFE), Chicago, Ill., June 26-30, 2011 Abstract online DOI:10.1109/10.1109/PLASMA.2011.5993099. doi:10.1109/PLASMA.2011.5993099
  2607. Present status of the 24 MW 170 GHz ITER EC H & D system
    Henderson, M.; Albajar, F.; Alberti, S.; Baruah, U.; Bigelow, T.; Becket, B.; Bertizzolo, R.; Bonicelli, T.; Bruschi, A.; Caughman, J.; Chavan, R.; Cirant, S.; Darbos, C.; deBaar, M.; Denisov, G.; Farina, D.; Gandini, F.; Gassmann, T.; Goodman, T. P.; Heidinger, R.; Hogge, J. P.; Kajiwara, K.; Kasparak, W.; Kasugai, A.; Kern, S.; Kobayashi, N.; Landis, J. D.; Moro, A.; Nazare, C.; Oda, J.; Omori, T.; Pagonakis, I.; Parmar, D.; Platania, P.; Plaum, B.; Poli, E.; Porte, L.; Piosczyk, B.; Purohit, D.; Ramponi, G.; Rao, S. L.; Rasmussen, D.; Ronden, D.; Saibene, G.; Sakamoto, K.; Sanchez, F.; Scherer, T.; Singh, N. P.; Shapiro, M.; Sozzi, C.; Spaeh, P.; Strauss, D.; Sauter, O.; Takahashi, K.; Temkin, R.; Thomas, P.; Thumm, M.; Zohm, H.
    2011. 8th Internat.Workshop ’Strong Microwaves and Terahertz Waves : Sources and Applications’, Nizhny Novgorod, Russia, July 9-16, 2011
  2608. Control of wettability of hydrogenated amorphous carbon thin films by laser-assisted micro- and nanostructuring
    Pfleging, W.; Kohler, R.; Torgue, M.; Trouillet, V.; Danneil, F.; Stüber, M.
    2011. Applied Surface Science, 257, 7907–7912. doi:10.1016/j.apsusc.2011.02.126
  2609. High-temperature oxidation of zirconium alloys in various atmospheres
    Steinbrück, M.
    2011. HI Temp Conf.2011, Boston, Mass., September 20-22, 2011
  2610. Low and high power microwave testing of the new prototype II ITER torus CVD diamond window with inserted waveguides
    Scherer, T. A.; Meier, A.; Strauss, D.; Schreck, S.; Takahashi, K.; Kajiwara, K.; Oda, Y.; Sakamoto, K.
    2011. 23rd Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, May 23-28, 2011 Folien auf CD-ROM
  2611. Grooved CVD diamond windows: Grooves’ profiles and structural simulations
    Vaccaro, A.; Aiello, G.; Scherer, T.; Schreck, S.; Meier, A.; Späh, P.; Strauss, D.; Stober, J.; Wagner, D.
    2011. 23rd Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, May 23-28, 2011 Folien auf CD-ROM
  2612. Outgassing measurements for the ITER EC H&CD upper launcher
    Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.
    2011. 23rd Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, May 23-28, 2011 Folien auf CD-ROM
  2613. CVD diamond torus windows for ITER ECRH prototype design and experimental investigations
    Schreck, S.; Scherer, T. A.; Strauss, D.; Meier, A.; Sakomoto, K.; Takahashi, K.; Kajiwara, K.; Oda, Y.; Saibene, G.
    2011. 8th Internat.Workshop ’Strong Microwaves and Terahertz Waves : Sources and Applications’, Nizhny Novgorod, Russia, July 9-16, 2011
  2614. The impact of refractory material properties on the helium cooled divertor design
    Rieth, M.; Reiser, J.; Dafferner, B.; Baumgärtner, S.
    2011. 15th Internat.Conf.on Emerging Nuclear Energy Systems (ICENES 2011), San Francisco, Calif., May 15-19, 2011
  2615. Two component tungsten powder injection molding for mass production of the He-cooled DEMO divertor parts
    Antusch, S.; Müller, M.; Norajitra, P.; Pintsuk, G.; Piotter, V.; Ritzhaupt-Kleissl, H. J.; Weingärtner, T.
    2011. 15th Internat.Conf.on Fusion Reactor Materials, Charleston, S.C., October 16-22, 2011
  2616. Analytical TEM characterization of precipitates in EUROFER 97
    Klimenkov, M.; Materna-Morris, E.; Lindau, R.; Möslang, A.
    2011. European Materials Research Society Bilateral Energy Conf., Nice, F, May 9-13, 2011
  2617. Microstructure analysis of tungsten materials produced by different fabrication routes
    Jäntsch, U.; Klimenkov, M.; Rieth, M.; Scherer, T.; Hoffmann, A.
    2011. 13th Internat.Workshop on Plasma-Facing Materials and Components for Fusion Applications, 1st Internat. Conf.on Fusion Energy Materials Science, Rosenheim, May 9-13, 2011 Book of Abstracts
  2618. Analytical TEM investigation of boron alloyed EUROFER 97
    Klimenkov, M.; Materna-Morris, E.; Lindau, R.
    2011. 13th Internat.Workshop on Plasma-Facing Materials and Components for Fusion Applications, 1st Internat. Conf.on Fusion Energy Materials Science, Rosenheim, May 9-13, 2011 Book of Abstracts
  2619. Energieströme in einer HF-Magnetonquelle zur Abscheidung superharter c-BN Schichten
    Bornholdt, S.; Ye, J.; Ulrich, S.; Kersten, H.
    2011. Frühjahrstagung DPG, Fachverband Plasmaphysik, Kiel, 28.-31.März 2011 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.46(2011).3
  2620. Effect of anisotropic lattice changes on ferromagnetic order in Sr₁₋ₓCaₓRuO₃
    Wissinger, M.; Fuchs, D.; Dieterle, L.; Leiste, H.; Schneider, R.; Gerthsen, D.; Löhneysen, H. von
    2011. Frühjahrstagung DPG, Fachverband Magnetismus, Dresden, 13.-18.März 2011 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.46(2011) MA 46.9
  2621. Significant stress reduction of cBN layers upon ion irradiation at elevated temperatures
    Weidner, S.; Geburt, S.; Ye, J.; Ulrich, S.; Ronning, C.
    2011. Frühjahrstagung DPG, Fachverband Dünne Schichten, Dresden, 13.-18.März 2011 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.46(2011) DS 42.83
  2622. CVD diamond for sub-mm and THz applications
    Scherer, T.; Strauss, D.; Meier, A.
    2011. Frühjahrstagung DPG, Fachverband Dielektrische Festkörper, Dresden, 13.-18.März 2011 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.46(2011) DF 18.3
  2623. Status and plans for an extension of the ECRH systems on ASDEX upgrade
    Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Schubert, M.; Schütz, H.; Wagner, D.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Gantenbein, G.; Flamm, J.; Kasparek, W.; Lecht, C.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.; Belov, Y.
    2011. 23rd Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, May 23-28, 2011 Folien auf CD-ROM
  2624. ECH beyond ITER: broadband diamond windows
    Strauss, D.; Flamm, J.; Gantenbein, G.; Meier, A.; Scherer, T. A.; Thumm, M.; Vaccaro, A.; Stober, J.; Wagner, D.; Denisov, G. G.
    2011. 23rd Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, May 23-28, 2011 Folien auf CD-ROM
  2625. Silicon oil DC200(R)5CST as an alternative coolant for CVD diamond windows
    Vaccaro, A.; Aiello, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Gantenbein, G.
    2011. Prater, R. [Hrsg.] Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-16) : Proc.of the 16th Joint Workshop, Sanya, China, April 12-15, 2010 Singapore [u.a.] : World Scientific, 2011 Incl.CD-ROM, 401–409
  2626. Recent upgrades of the ITER ECRH CVD torus diamond window design and investigation of dielectric diamond properties
    Scherer, T. A.; Strauss, D.; Vaccaro, A.; Aiello, G.; Schreck, S.; Meier, A.; Späh, P.
    2011. Prater, R. [Hrsg.] Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-16) : Proc.of the 16th Joint Workshop, Sanya, China, April 12-15, 2010 Singapore [u.a.] : World Scientific, 2011 Incl.CD-ROM, 396–400
  2627. Deflections and vibrations of the ITER ECRH upper launcher
    Strauss, D.; Scherer, T.; Aiello, G.; Meier, A.; Schreck, S.; Späh, P.; Vaccaro, A.
    2011. Prater, R. [Hrsg.] Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC-16) : Proc.of the 16th Joint Workshop, Sanya, China, April 12-15, 2010 Singapore [u.a.] : World Scientific, 2011 Incl.CD-ROM, 370–375
  2628. Operation of the multifrequency ECRH system at ASDEX upgrade
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Münich, M.; Schubert, M.; Schütz, H.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Gantenbein, G.; Flamm, J.; Kasparek, W.; Höhnle, H.; Lechte, C.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2011. 36th Internat.Conf.on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2011), Houston, Tex., October 2-7, 2011
  2629. Laser micromachining of polymers
    Khan Malek, C. G.; Pfleging, W.; Roth, S.
    2011. del Campo, A. [Hrsg.] Generating Micro- and Nanopatterns on Polymeric Materials Weinheim : Wiley-VCH, 2011, 141–162. doi:10.1002/9783527633449.ch8
  2630. Laser micro-structuring of magnetron-sputtered SnOₓ thin films as anode materials for lithium ion batteries
    Kohler, K.; Besser, H.; Hagen, M.; Ye, J.; Ziebert, C.; Ulrich, S.; Proell, J.; Pfleging, W.
    2011. Microsystem Technologies, 17, 225–232. doi:10.1007/s00542-011-1259-1
  2631. Results of Severe Fuel Damage Experiment QUENCH-15 with ZIRLO cladding tubes. (KIT Scientific Reports ; 7576)
    Stuckert, J.; Große, M.; Stegmaier, U.; Steinbrück, M.
    2011. KIT Scientific Publishing. doi:10.5445/KSP/1000022788
  2632. In situ Raman spectroscopy to monitor the hydrolysis of acetal in microreactors
    Rinke, G.; Ewinger, A.; Kerschbaum, S.; Rinke, M.
    2011. Microfluidics and Nanofluidics, 10, 145–153. doi:10.1007/s10404-010-0654-8
  2633. ECRH on ASDEX Upgrade-system extension, new modes of operation, plasma physics results
    Stober, J.; Wagner, D.; Gianone, I.; Leuterer, F.; Monaco, F.; Marascheck, M.; Mlynek, A.; Mszanowski, U.; Mnich, M.; Poli, E.
    2011. Electron cyclotron emission and electron cyclotron resonance heating - Proceedings of the 16th Joint Workshop, Sanya, China, 12 - 15 April, 2010. Ed.: R. Prater, 28–41, World Scientific Publishing. doi:10.1142/9789814340274_0003
  2634. The ITER EC H&CD System
    Henderson, M.; Becket, B.; Cox, C.; Darbos, C.; Gandini, F.; Gassman, T.; Jean, O.; Nazare, C.; Omori, T.; Purohit, D.; Tanga, A.; Udintsev, V.; Albajar, F.; Bonicelli, T.; Heidinger, R.; Saibene, G.; Alberti, S.; Bertizzolo, R.; Chavan, R.; Collazos, A.; Goodman, T. P.; Hogge, J. P.; Landis, J. D.; Paganakis, I.; Porte, L.; Sanchez, F.; Sauter, O.; Tran, M. Q.; Zucca, C.; Baruah, U.; Kushwah, M.; Singh, N. P.; Rao, S. L.; Bigelow, T.; Caughman, J.; Rasmussen, D.; Bruschi, A.; Cirant, S.; Farina, D.; Moro, A.; Platania, P.; Ramponi, G.; Sozzi, C.; Baar, M. de; Ronden, D.; Denisov, G.; Kajiwara, K.; Kasugai, A.; Kobayashi, N.; Oda, Y.; Sakamoto, K.; Takahashi, K.; Kasparek, W.; Kumric, H.; Plaum, B.; Aiello, G.; Gantenbein, G.; Illy, S.; Jin, J.; Kern, S.; Meier, A.; Piosczyk, B.; Rzesnicki, T.; Scherer, T.; Schreck, S.; Serikov, A.; Spaeh, P.; Strauss, D.; Thumm, M.; Vaccaro, A.; Poli, E.; Zohm, H.; Shapiro, M.; Temkin, R.
    2011. Electron cyclotron emission and electron cyclotron resonance heating - Proceedings of the 16th Joint Workshop, Sanya, China, 12 - 15 April, 2010. Ed.: R. Prater, 353–363, World Scientific Publishing
  2635. Cluster-Antrag KERAMET: Löten von SiC-Keramik mit Metall für Hochtemperaturanwendungen
    Südmeyer, I.
    2011. Sitzung der Technischen Kommission des Verbands der Keramischen Industrie, Eschenfelden, 17.März 2011
  2636. Recent upgrades and extensions of the ASDEX upgrade ECRH system
    Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Münich, M.; Schmid-Lorch, D.; Schütz, H.; Zohm, H.; Thumm, M.; Scherer, T.; Meier, A.; Gantenbein, G.; Flamm, J.; Kasparek, W.; Höhnle, H.; Lechte, C.; Litvak, A. G.; Denisov, G. C.; Chirkov, A.; Popov, L. G.; Nichiporenko, V. O.; Myasnikov, V. E.; Tai, E. M.; Solyanova, E. A.; Malygin, S. A.
    2011. Journal of infrared, millimeter, and terahertz waves, 32 (3), 274–282. doi:10.1007/s10762-010-9703-3
  2637. Realisierung und Optimierung von Dünnschichtkomponenten für Li-Ionen-Batterien mittels HF-Magnetronzerstäubung und Laserprozesstechnik
    Ziebert, C.; Ketterer, B.; Hagen, M.; Knorr, A.; Thiel, N.; Fischer, J.; Kohler, R.; Pröll, J.; Pfleging, W.; Ulrich, S.
    2011. EFDS Workshop ’Technologien für die dezentrale Energiespeicherung auf Basis innovativer Akkumulatoren’, Dresden, 24.März 2011
  2638. Influence of deposition parameters on constitution, microstructure, and ionic conductivity of magnetron sputtered thin film solid state electrolytes in the material system Li-V-Si-O
    Ziebert, C.; Knorr, A.; Thiel, N.; Rinke, M.; Seemann, K.; Ulrich, S.; Gerthsen, D.; Schimmel, T.
    2011. 3.Tagung Kraftwerk Batterie - Lösungen für Automobil und Energieversorgung, Aachen, 1.-2.März 2011
  2639. Development of Li-Mn-O thin film cathodes for lithium-ion batteries by magnetron sputtering and laser-assisted structuring and annealing
    Ziebert, C.; Fischer, J.; Thiel, N.; Pröll, J.; Kohler, R.; Rinke, M.; Ulrich, S.; Pfleging, W.
    2011. 38th Internat.Conf.on Metallurgical Coatings & Thin Films (ICMCTF 2011), San Diego, Calif., May 2-6, 2011
  2640. First-principles modeling of tungsten-based alloys for fusion power plant applications
    Nguyen-Manh, D.; Muzyk, M.; Kurzydlowski, K. J.; Baluc, N. L.; Rieth, M.; Dudarev, S. L.
    2011. Sandera, P. [Hrsg.] Selected, Peer-reviewed Papers from the 6th Internat.Conf.’Materials Structure and Micromechanics of Fracture (MSMF-6)’, Brno, CZ, June 28-30, 2010 Stafa-Zuerich : Trans Tech Publ., 2011 (Key Engineering Materials ; 465)
  2641. First-principles modeling of tungsten-based alloys for fusion power plant applications
    Nguyen-Manh, D.; Muzyk, M.; Kurzydlowski, K. J.; Baluc, N. L.; Rieth, M.; Dudarev, S. L.
    2011. Sandera, P. [Hrsg.] Selected, Peer-reviewed Papers from the 6th Internat.Conf.’Materials Structure and Micromechanics of Fracture (MSMF-6)’, Brno, CZ, June 28-30, 2010 Stafa-Zuerich : Trans Tech Publ., 2011 (Key Engineering Materials ; 465), 15–20. doi:10.4028/www.scientific.net/KEM.465.15
  2642. Tungsten as a structural divertor material
    Rieth, M.; Armstrong, D.; Dafferner, B.; Heger, S.; Hoffmann, A.; Hoffmann, M. D.; Jäntsch, U.; Kübel, C.; Materna-Morris, E.; Reiser, J.; Rohde, M.; Scherer, T.; Widak, V.; Zimmermann, H.
    2011. Vincenzini, P. [Hrsg.] Selected Papers from the 5th Forum on New Materials, Part of CIMTEC 2010 - 12th Internat.Conf.on Modern Materials and Technologies, Montecatini Terme, I, June 6-18, 2010 Stafa-Zürich : Trans Tech Publ., 2011 (Advances in Science and Technology ; 73), 11–21. doi:10.4028/www.scientific.net/AST.73.11
  2643. Molecular dynamics simulations of the sputtering process of silicon and the homoepitaxial growth of a Si coating on silicon
    Prskalo, A. P.; Schmauder, S.; Ziebert, C.; Ye, J.; Ulrich, S.
    2011. Computational Materials Science, 59, 1320–1325. doi:10.1016/j.commatsci.2010.08.006
  2644. The Effect of Pre-Oxidation Treatment on the High-Temperature Oxidation of Co–Re–Cr Model Alloys at Laboratory Air
    Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
    2010. Oxidation of Metals, 74 (5-6), 239–253. doi:10.1007/s11085-010-9213-7
  2645. High temperature oxidation of Mo–Si–B alloys: Effect of low and very low oxygen partial pressures
    Burk, S.; Gorr, B.; Christ, H.-J.
    2010. Acta Materialia, 58 (18), 6154–6165. doi:10.1016/j.actamat.2010.07.034
  2646. High‐temperature oxidation behaviour of model CoReCr alloys at low oxygen partial pressure
    Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
    2010. Materials and Corrosion, 61 (9), 741–747. doi:10.1002/maco.200905412
  2647. Effect of Zr Addition on the High-Temperature Oxidation Behaviour of Mo–Si–B Alloys
    Burk, S.; Gorr, B.; Trindade, V. B.; Christ, H.-J.
    2010. Oxidation of Metals, 73 (1-2), 163–181. doi:10.1007/s11085-009-9175-9
  2648. Mechanical properties of pre-hydrogenated (600 - 5000 wppm) cladding segments
    Stuckert, J.; Große, M.; Walter, M.
    2010. Steinbrück, M. [Hrsg.] Proc.of the 16th Internat.QUENCH Workshop, Karlsruhe, November 16-18, 2010 CD-ROM Karlsruhe : Karlsruhe Inst.of Technology, Campus North, 2010 urn:nbn:de:0005-900101, 16th International QUENCH Workshop (2010), Karlsruhe, Germany, November 16–18, 2010
  2649. Metallic materials for structural applications beyond nickel-based superalloys
    Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
    2009. JOM, 61 (7), 61–67. doi:10.1007/s11837-009-0106-7
  2650. High temperature oxidation of mechanically alloyed Mo–Si–B alloys
    Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ, H.-J.
    2009. Corrosion Engineering, Science and Technology, 44 (3), 168–175. doi:10.1179/174327809X419122
  2651. Oxidation behaviour of model Co–Re alloys during exposure to laboratory air at 1000°C
    Gorr, B.; Trindade, V. B.; Burk, S.; Christ, H.-J.
    2009. Corrosion Engineering, Science and Technology, 44 (3), 176–181. doi:10.1179/174327809X419131
  2652. Oxidation Behaviour of Model Cobalt-Rhenium Alloys During Short-Term Exposure to Laboratory Air at Elevated Temperature
    Gorr, B.; Trindade, V.; Burk, S.; Christ, H.-J.; Klauke, M.; Mukherji, D.; Rösler, J.
    2009. Oxidation of Metals, 71 (3-4), 157–172. doi:10.1007/s11085-008-9133-y
  2653. Oxidation behaviour of experimental Co–Re-base alloys in laboratory air at 1000°C
    Klauke, M.; Mukherji, D.; Gorr, B.; da Trindade Filho, V. B.; Rösler, J.; Christ, H.-J.
    2009. International Journal of Materials Research, 100 (1), 104–111. doi:10.3139/146.101792
  2654. Experimental analysis and computer‐based simulation of nitridation of Ni‐base alloys—the effect of a pre‐oxidation treatment
    Trindade, V. B.; Krupp, U.; Gorr, B.; Kaczorowski, D.; Girardin, G.; Christ, H.-J.
    2008. Materials and Corrosion, 59 (7), 602–608. doi:10.1002/maco.200804144
  2655. High temperature oxidation of multiphase Mo-Si-B-X alloys
    Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ:, H.-J.
    2008. Managing Corrosion for Sustainability, Proc. of EUROCORR 2008 – The European Corrosion Congress, 7.-11. September 2008, Edinburgh, UK, European Federation of Corrosion
  2656. Characterizing the Carburization of Ethylene Pyrolysis Tubes by Means of Non-Destructive Magnetic Measurements and Thermodynamics Calculations
    Trindade, V. B.; Silva, I. C.; Gorr, B.; Dille, J.; Jacques, P. J.; Rebello, J. M. A.; Bruno, A. C.; Christ, H.-J.
    2007. Annual Congress of the European Federation of Corrosion (EUROCORR) 2007, Annual Congress of the European Federation of Corrosion (2007), Freiburg im Breisgau, Deutschland, 09.09.2007–13.09.2007
  2657. Experimental investigation of the late phase of spent fuel pool accidents
    Kunstar, M.; Matus, L.; Ver, N.; Pinter, A.; Hozer, Z.; Steinbrück, M.; Stuckert, J.
    2007. International journal of nuclear energy science and technology, 3 (3), 287. doi:10.1504/IJNEST.2007.016667
  2658. Mo-Si-Ti (Molybdenum - Silicon - Titanium)
    Bondar, A.; Lukas, H. L.
    2006. Ternary Alloy Systems: Phase Diagrams, Crystallographic and Thermodynamic Data critically evaluated by MSIT® · Light Metal Systems. Part 4 . Ed.: G. Effenberg, 385–405, Springer Nature
  2659. ZRO₂ and UO₂ dissolution by molten Zircalloy
    Stuckert, J.; Miassoedov, A.; Hayward, P. J.; Hofmann, P.; Veshchunov, M.
    2002. Proceedings of the International Conference Nuclear Energy for New Europe 2002 (NENE 2002), Kranjska Gora, SLO, September 9-12, 2002. Ed.: I. Jencic, 251–258, Nuclear Society of Slovenia
  2660. Depth-resolved X-ray analysis of residual stresses in graded PVD coatings of Ti(C,N)
    Dümmer, T.; Eigenmann, B.; Stüber, M.; Leiste, H.; Löhe, D.; Müller, H.; Vöhringer, O.
    1999. International journal of materials research, 90 (10), 780–787