Prof_Hanemann

Prof. (apl.) Dr.-Ing. Thomas Hanemann

Lebenslauf

2011 Übernahme der Professur „Werkstoffprozesstechnik“ am Institut für Mikrosystemtechnik der Albert-Ludwigs-Universität Freiburg
2010

Ernennung zum Abteilungsleiter am Institut für Materialforschung des Karlsruher Instituts für Technologie
2009

Ernennung zum APL-Professor am Institut für Mikrosystemtechnik der Albert-Ludwigs-Universität Freiburg
2005

Habilitation am Institut für Mikrosystemtechnik der Albert-Ludwigs-Universität Freiburg
seit 2000 Delegation vom Forschungszentrum Karlsruhe an den Lehrstuhl Werkstoffprozesstechnik des Instituts (Leitung: Prof. Dr.-Ing. Jürgen Haußelt) für Mikrosystemtechnik der Albert-Ludwigs-Universität Freiburg (Gruppenleiter und Lehrbeauftragter) und in Personalunion
Gruppenleiter der Gruppe Werkstoffe und Verfahren am Institut für Materialforschung III des Forschungszentrums Karlsruhe
1995 - 2000

Wissenschaftlicher Mitarbeiter am Institut für Materialforschung III (heute Institut für Angewandte Materialen) des Forschungszentrums Karlsruhe (heute KIT)
1994 - 1995

Gastwissenschaftler am Organic Optoelectronic Materials Department des IBM Forschungszentrums in Almaden, San Jose, Kalifornien
1993

Promotion zum Dr.-Ing. (Chemie) am Institut für Physikalische Chemie, TU Darmstadt, Thema: „Untersuchungen an niedermolekularen und polymeren Guest-Host-Systemen“
1989 - 1994

Wissenschaftlicher Mitarbeiter am Institut für Physikalische Chemie der TU Darmstadt
1987

Diplom-Ingenieur (Chemie) am Institut für Organische Chemie der Technischen Hochschule Darmstadt (heute Technische Universität Darmstadt)
24.03.1963

geboren in Darmstadt

Forschungsfelder

  • 3D-Druck von Polymeren und Kompositbauteilen mittels STL und FDM
  • Prozesskette Mikropulverspritzgießen von Keramiken und Metallen
  • Materialentwicklung im Bereich Lithium-Ionen-Batterien
  • Entwicklung von Polymeren mit maßgeschneiderten optischen Eigenschaften (Universität Freiburg)
  • Prozessierung und Mikrostrukturierung von Funktionskeramiken (Universität Freiburg)

Publikationen


Influence of the layer orientation and the binder system on the mechanical behavior of titanium components manufactured by Metal Fused Filament Fabrication (MF3)
Eickhoff, R.; Antusch, S.; Tesari, I.; Mikulics, M.; Hardtdegen, H. H.; Nötzel, D.; Kutlu, A.; Hanemann, T.
2026. Materials Science and Engineering: A, 975, 150905. doi:10.1016/j.msea.2026.150905
Evaluating high-boiling binary carbonate mixtures for enhanced lithium-ion battery safety
Hofmann, A.; Wang, Z.; Hanemann, T.
2026. Journal of Applied Electrochemistry, 56 (6), Art.Nr: 112. doi:10.1007/s10800-026-02492-5
Development of a soda-lime glass feedstock for injection molding
Zürn, M.; Antusch, S.; Nötzel, D.; Schrage, A.; Walter, H.; Hanemann, T.
2026. Materials, 19 (5), Art.-Nr.: 854. doi:10.3390/ma19050854
Biological Response of Osteoblasts to Zirconia Manufactured via FFF, DLP, and Milling
Roser, C. J.; Erber, R.; Zenthöfer, A.; Rues, S.; Lux, C. J.; Nötzel, D.; Eickhoff, R.; Hanemann, T.
2025. Journal of Functional Biomaterials, 16 (11), Article no: 397. doi:10.3390/jfb16110397
Barium Strontium Titanate: Comparison of Material Properties Obtained via Solid-State and Sol–Gel Synthesis
Hanemann, T.; Ade, M.; Cimen, E.; Schoenfelder, J.; Honnef, K.; Wapler, M.; Ketterer, I.
2025. Ceramics, 8 (4), Art.-Nr.: 126. doi:10.3390/ceramics8040126
Ceramic fused filament fabrication (CF) of zirconia implants by using flexible, partially water-soluble binder systems
Eickhoff, R.; Nötzel, D.; Oral, G.; Scholz, M.; Hanemann, T.
2025. Materials & Design, 254, 114148. doi:10.1016/j.matdes.2025.114148
Metal fused filament fabrication (MF) of Ti-6Al-4 V implants by using flexible, partially water-soluble binder systems
Eickhoff, R.; Antusch, S.; Nötzel, D.; Hanemann, T.
2025. Materials & Design, 254, 114088. doi:10.1016/j.matdes.2025.114088
Characterization of Material Extrusion-Printed Amorphous Poly(Ether Ketone Ketone) (PEKK) Parts
Hanemann, T.; Klein, A.; Baumgärtner, S.; Jung, J.; Wilhelm, D.; Antusch, S.
2025. Polymers, 17 (8), 1069. doi:10.3390/polym17081069
Development of Flexible and Partly Water-Soluble Binder Systems for Metal Fused Filament Fabrication (MF) of Ti-6Al-4V Parts
Eickhoff, R.; Antusch, S.; Nötzel, D.; Probst, M.; Hanemann, T.
2024. Polymers, 16 (17), Art.-Nr.: 2548. doi:10.3390/polym16172548
Evaluation of Material Extrusion Printed PEEK Mold Inserts for Usage in Ceramic Injection Molding
Hanemann, T.; Klein, A.; Walter, H.; Wilhelm, D.; Antusch, S.
2024. Journal of manufacturing and materials processing, 8 (4), Article no: 156. doi:10.3390/jmmp8040156
Additive manufacturing of novel complex tungsten components via electron beam melting: Basic properties and evaluation of the high heat flux behavior
Antusch, S.; Klein, A.; Baumgärtner, S.; Bonnekoh, C.; Böswirth, B.; Dorow-Gerspach, D.; Dietrich, S.; Ehrhardt, M.; Ghidersa, B. E.; Greuner, H.; Guttmann, M.; Hanemann, T.; Jung, J.; Konrad, J.; Rieth, M.
2024. Nuclear Materials and Energy, 39, Art.-Nr.: 101683. doi:10.1016/j.nme.2024.101683
Development of a Polyethylene Glycol/Polymethyl Methacrylate-Based Binder System for a Borosilicate Glass Filler Suitable for Injection Molding
Zürn, M.; Schrage, A.; Antusch, S.; Bohn, N.; Holzer, P.; Hanemann, T.
2024. Materials, 17 (6), Art.-Nr.: 1396. doi:10.3390/ma17061396
Development of Inkjet Printable Formulations Based on Polyorganosilazane and Divinylbenzene
Qazzazie-Hauser, A.; Honnef, K.; Hanemann, T.
2023. Polymers, 15 (23), 4512. doi:10.3390/polym15234512
Negative temperature coefficient and positive temperature coefficient behavior of electrically conductive silicone/carbon black composites
Nagel, J.; Hanemann, T.; Rapp, B. E.; Finnah, G.
2023. Journal of Composite Materials, 57 (26), 4183–4196. doi:10.1177/00219983231207357
Characterization of the Metal Fused Filament Fabrication Process for Manufacturing of Pure Copper Inductors
Schüßler, P.; Franke, J.; Czink, S.; Antusch, S.; Mayer, D.; Laube, S.; Hanemann, T.; Schulze, V.; Dietrich, S.
2023. Materials, 16 (20), Art.-Nr.: 6678. doi:10.3390/ma16206678
Material Extrusion 3D Printing of PEEK-Based Composites
Hanemann, T.; Klein, A.; Baumgärtner, S.; Jung, J.; Wilhelm, D.; Antusch, S.
2023. Polymers, 15 (16), Art.-Nr.: 3412. doi:10.3390/polym15163412
New Partially Water-Soluble Feedstocks for Additive Manufacturing of Ti6Al4V Parts by Material Extrusion
Eickhoff, R.; Antusch, S.; Nötzel, D.; Hanemann, T.
2023. Materials, 16 (8), Art.-Nr.: 3162. doi:10.3390/ma16083162
Effect of Flame Retardants and Electrolyte Variations on Li-Ion Batteries
Fulik, N.; Hofmann, A.; Nötzel, D.; Müller, M.; Reuter, I.; Müller, F.; Smith, A.; Hanemann, T.
2023. Batteries, 9 (2), 82. doi:10.3390/batteries9020082
Development of a Contactless Conductivity Sensor in Flowing Micro Systems for Cerium Nitrate
Zürn, M.; Hanemann, T.
2022. Processes, 10 (10), Article no: 2075. doi:10.3390/pr10102075
Feedstock Development for Material Extrusion-Based Printing of Ti6Al4V Parts
Eickhoff, R.; Antusch, S.; Baumgärtner, S.; Nötzel, D.; Hanemann, T.
2022. Materials, 15 (18), Art.-Nr.: 6442. doi:10.3390/ma15186442
Enhanced PTC Effect in Polyamide/Carbon Black Composites
Nagel, J.; Hanemann, T.; Rapp, B. E.; Finnah, G.
2022. Materials, 15 (15), 5400. doi:10.3390/ma15155400
Novel Phosphonium-Based Ionic Liquid Electrolytes for Battery Applications
Hofmann, A.; Rauber, D.; Wang, T.-M.; Hempelmann, R.; Kay, C. W. M.; Hanemann, T.
2022. Molecules, 27 (15), Art.Nr.: 4729. doi:10.3390/molecules27154729
Dataset of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells
Hofmann, A.; Wang, Z.; Bautista, S. P.; Weil, M.; Müller, F.; Löwe, R.; Schneider, L.; Mohsin, I. U.; Hanemann, T.
2022. Data in Brief, 40, Article no: 107775. doi:10.1016/j.dib.2021.107775
Überwachung der kontinuierlichen hydrothermalen Synthese mittels Impedanzspektroskopie 
Schüßler, C.; Zürn, M.; Hanemann, T.; Türk, M.
2022. Chemie - Ingenieur - Technik, 94 (3), 281–288. doi:10.1002/cite.202100146
Poly(ionic liquid) Based Composite Electrolytes for Lithium Ion Batteries
Löwe, R.; Hanemann, T.; Zinkevich, T.; Hofmann, A.
2021. Polymers, 13 (24), Article no: 4469. doi:10.3390/polym13244469
Comprehensive characterization of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells
Hofmann, A.; Wang, Z.; Bautista, S. P.; Weil, M.; Müller, F.; Löwe, R.; Schneider, L.; Mohsin, I. U.; Hanemann, T.
2021. Electrochimica acta, 403, Art.Nr.: 139670. doi:10.1016/j.electacta.2021.139670
Printing of Zirconia Parts via Fused Filament Fabrication
Nötzel, D.; Eickhoff, R.; Pfeifer, C.; Hanemann, T.
2021. Materials, 14 (19), Art.-Nr.: 5467. doi:10.3390/ma14195467
Formulation of a Ceramic Ink for 3D Inkjet Printing
Graf, D.; Jung, J.; Hanemann, T.
2021. Micromachines, 12 (9), 1136. doi:10.3390/mi12091136
Development of actual powder layer height depending on nominal layer thicknesses and selection of laser parameters
Jansen, D.; Hanemann, T.; Radek, M.; Rota, A.; Schröpfer, J.; Heilmaier, M.
2021. Journal of materials processing technology, 298, Art.-Nr.: 117305. doi:10.1016/j.jmatprotec.2021.117305
Crosslinking Behavior of UV-Cured Polyorganosilazane as Polymer-Derived Ceramic Precursor in Ambient and Nitrogen Atmosphere
Qazzazie-Hauser, A.; Honnef, K.; Hanemann, T.
2021. Polymers, 13 (15), Art. Nr.: 2424. doi:10.3390/polym13152424
Structure-Property Relation of Trimethyl Ammonium Ionic Liquids for Battery Applications
Rauber, D.; Hofmann, A.; Philippi, F.; Kay, C. W. M.; Zinkevich, T.; Hanemann, T.; Hempelmann, R.
2021. Applied Sciences, 11 (12), 5679. doi:10.3390/app11125679
Structure–Property Relationship of Polymerized Ionic Liquids for Solid-State Electrolyte Membranes
Löwe, R.; Hanemann, T.; Zinkevich, T.; Hofmann, A.
2021. Polymers, 13 (5), 792. doi:10.3390/polym13050792
Influence of Temperature and Plastic Strain on Deformation Mechanisms and Kink Band Formation in Homogenized HfNbTaTiZr
Chen, H.; Hanemann, T.; Seils, S.; Schliephake, D.; Tirunilai, A. S.; Heilmaier, M.; Weiss, K.-P.; Kauffmann, A.
2021. Crystals, 11 (2), 81. doi:10.3390/cryst11020081
3D-Printed Hermetic Alumina Housings
Eickenscheidt, M.; Langenmair, M.; Dbouk, A.; Nötzel, D.; Hanemann, T.; Stieglitz, T.
2021. Materials, 14 (1), Art. Nr.: 200. doi:10.3390/ma14010200
Dimensionless Enthalpy as Characteristic Factor for Process Control in Laser Powder Bed Fusion
Hanemann, T.; Seyfert, C.; Holfelder, P.; Rota, A.; Heilmaier, M.
2020. Journal of Laser Micro/Nanoengineering, 15 (3), 257–266. doi:10.2961/jlmn.2020.03.2017
New Feedstock System for Fused Filament Fabrication of Sintered Alumina Parts
Nötzel, D.; Hanemann, T.
2020. Materials, 13 (19), Art.-Nr.: 4461. doi:10.3390/ma13194461
Dislocation-based Serrated Plastic Flow of High Entropy Alloys at Cryogenic Temperatures
Tirunilai, A. S.; Hanemann, T.; Weiss, K.-P.; Freudenberger, J.; Heilmaier, M.; Kauffmann, A.
2020. Acta materialia, 200, 980–991. doi:10.1016/j.actamat.2020.09.052
Investigations on the Processing of Ceramic Filled Inks for 3D InkJet Printing
Graf, D.; Qazzazie, A.; Hanemann, T.
2020. Materials, 13 (11), Art. Nr.: 2587. doi:10.3390/ma13112587
Development of a multi-material stereolithography 3D printing device
Khatri, B.; Frey, M.; Raouf-Fahmy, A.; Scharla, M.-V.; Hanemann, T.
2020. Micromachines, 11 (5), 532. doi:10.3390/mi11050532
3D Printing of ABS Barium Ferrite Composites
Hanemann, T.; Syperek, D.; Nötzel, D.
2020. Materials, 13 (6), Artice no: 1481. doi:10.3390/ma13061481
Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
Tirunilai, A. S.; Hanemann, T.; Reinhart, C.; Tschan, V.; Weiss, K.-P.; Laplanche, G.; Freudenberger, J.; Heilmaier, M.; Kauffmann, A.
2020. Materials science and engineering / A, 783, Art. Nr.: 139290. doi:10.1016/j.msea.2020.139290
Charakterisierung via FFF-Verfahren additiv gefertigter keramischer Bauteile
Nötzel, D.; Hanemann, T.; Eickhoff, R.
2019. Keramische Zeitschrift, 71 (6), 56–61. doi:10.1007/s42410-019-0074-7
Additives for Cycle Life Improvement of High‐Voltage LNMO‐Based Li‐Ion Cells
Hofmann, A.; Höweling, A.; Bohn, N.; Müller, M.; Binder, J. R.; Hanemann, T.
2019. ChemElectroChem, 6 (20), 5255–5263. doi:10.1002/celc.201901120
Powder injection molding of oxide ceramic CMC
Piotter, V.; Tueluemen, M.; Hanemann, T.; Hoffmann, M.; Ehreiser, B.
2019. Key engineering materials, 809, 148–152. doi:10.4028/www.scientific.net/KEM.809.148
Ceramic Injection Moulding using 3D-Printed Mould Inserts
Medesi, A.; Nötzel, D.; Wohlgemuth, J.; Franzreb, M.; Hanemann, T.
2019. CMT - Ceramics in Modern Technologies, 1 (2), 104–110. doi:10.29272/cmt.2019.0001
Orientation Dependent Fatigue Performance and Mechanisms of Selective Laser Melted Maraging Steel X3NiCoMoTi18-9-5
Damon, J.; Hanemann, T.; Dietrich, S.; Graf, G.; Lang, K.-H.; Schulze, V.
2019. International journal of fatigue, 127, 395–402. doi:10.1016/j.ijfatigue.2019.06.025
In-situ alloying of AlSi10Mg+Si using Selective Laser Melting to control the coefficient of thermal expansion
Hanemann, T.; Carter, L. N.; Habschied, M.; Adkins, N. J. E.; Attallah, M. M.; Heilmaier, M.
2019. Journal of alloys and compounds, 795, 8–18. doi:10.1016/j.jallcom.2019.04.260
The influence on sintering and properties of sodium niobate (NaNbO₃) ceramics by “non-stoichiometric” precursor compositions
Ruf, T.; Mauck, M.; Megnin, C.; Winkler, M.; Hillebrecht, H.; Hanemann, T.
2019. Materials chemistry and physics, 229, 437–447. doi:10.1016/j.matchemphys.2019.03.037
PVB/PEG-Based Feedstocks for Injection Molding of Alumina Microreactor Components
Medesi, A. J.; Nötzel, D.; Hanemann, T.
2019. Materials, 12 (8), Article: 1219. doi:10.3390/ma12081219
Influence of Al₂O₃ Nanoparticle Addition on a UV Cured Polyacrylate for 3D Inkjet Printing
Graf, D.; Burchard, S.; Crespo, J.; Megnin, C.; Gutsch, S.; Zacharias, M.; Hanemann, T.
2019. Polymers, 11 (4), Article: 633. doi:10.3390/polym11040633
Electrophoretic Deposition of BiVO₄ Layers on FTO Substrates for Photo Electro-chemical Cells
Megnin, C.; Mauck, M.; Hertkorn, D.; Hanemann, T.; Mueller, C.
2019. Ceramics silikáty, 63 (1), 124–130. doi:10.13168/cs.2019.0004
Overcoming oxygen inhibition effect by TODA in acrylate-based ceramic-filled inks
Rostami, N.; Graf, D.; Schranzhofer, L.; Hild, S.; Hanemann, T.
2019. Progress in organic coatings, 130, 221–225. doi:10.1016/j.porgcoat.2019.01.048
Experimental dataset on electrolyte mixtures containing fluoroethylene carbonate and lithium bis(trifluoromethanesulfonyl)imide
Wang, Z.; Hofmann, A.; Hanemann, T.
2019. Data in Brief, 23 (April), Art.Nr. 103703. doi:10.1016/j.dib.2019.103703
Investigation of Feedstock Preparation for Injection Molding of Oxide–Oxide Ceramic Composites
Tülümen, H. M.; Hanemann, T.; Piotter, V.; Stenzel, D.
2019. Journal of manufacturing and materials processing, 3 (1), 9. doi:10.3390/jmmp3010009
Polymerizable Ionic Liquids for Solid-State Polymer Electrolytes
Löwe, R.; Hanemann, T.; Hofmann, A.
2019. Molecules, 24 (2), Article: 324. doi:10.3390/molecules24020324
Low-flammable electrolytes with fluoroethylene carbonate based solvent mixtures and lithium bis(trifluoromethanesulfonyl)imide for lithium-ion batteries
Wang, Z.; Hofmann, A.; Hanemann, T.
2019. Electrochimica acta, 298, 960–972. doi:10.1016/j.electacta.2018.12.117
Fused Filament Fabrication of Small Ceramic Components
Nötzel, D.; Eickhoff, R.; Hanemann, T.
2018. Materials, 11 (8), 1463–1473. doi:10.3390/ma11081463
Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices
Khatri, B.; Lappe, K.; Habedank, M.; Mueller, T.; Megnin, C.; Hanemann, T.
2018. Polymers, 10 (6), 666–683. doi:10.3390/polym10060666
Optical and Thermomechanical Properties of Doped Polyfunctional Acrylate Copolymers
Hanemann, T.; Honnef, K.
2018. Polymers, 10 (3), Art.Nr. 337. doi:10.3390/polym10030337
Inkjet-printed internal light extraction layers for organic light emitting diodes
Eiselt, T.; Preinfalk, J. B.; Bittkau, K.; Gomard, G.; Hanemann, T.; Lemmer, U.
2018. Flexible and printed electronics, 3 (1), Art.Nr. 015007. doi:10.1088/2058-8585/aaa37b
A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization
Khatri, B.; Lappe, K.; Noetzel, D.; Pursche, K.; Hanemann, T.
2018. Materials, 11 (2), Art.Nr. 189. doi:10.3390/ma11020189
Ink-jet printed optical waveguides
Bollgruen, P.; Wolfer, T.; Gleissner, U.; Mager, D.; Megnin, C.; Overmeyer, L.; Hanemann, T.; Korvink, J. G.
2017. Flexible and printed electronics, 2 (4), Art. Nr.: 045003. doi:10.1088/2058-8585/aa8ed6
Micron‐Sized Pored Membranes Based on Polyvinylidene Difluoride Hexafluoropropylene Prepared by Phase Inversion Techniques
Hofmann, A.; Thißen, E.; Migeot Matthias; Bohn, N.; Dietrich, S.; Hanemann, T.
2017. Polymers, 9 (10), 489/1–12. doi:10.3390/polym9100489
Pulsed laser deposition of piezoelectric lead zirconate titanate thin films maintaining a post-CMOS compatible thermal budget
Schatz, A.; Pantel, D.; Hanemann, T.
2017. Journal of applied physics, 122, 114502/1–8. doi:10.1063/1.5000367
Process Development for the Ceramic Injection Molding of Oxide Chopped Fiber Reinforced Aluminum Oxide
Tülümen, M.; Hanemann, T.; Hoffmann, M. J.; Oberacker, R.; Piotter, V.
2017. Key engineering materials, 742, 231–237. doi:10.4028/www.scientific.net/KEM.742.231
Towards low-temperature deposition of piezoelectric Pb(Zr,Ti)O₃ : Influence of pressure and temperature on the properties of pulsed laser deposited Pb(Zr,Ti)O₃
Schatz, A.; Pantel, D.; Hanemann, T.
2017. Thin solid films, 636, 680–687. doi:10.1016/j.tsf.2017.06.045
Preventing Li-ion cell explosion during thermal runaway with reduced pressure
Hofmann, A.; Uhlmann, N.; Ziebert, C.; Wiegand, O.; Schmidt, A.; Hanemann, T.
2017. Applied thermal engineering, 124, 539–544. doi:10.1016/j.applthermaleng.2017.06.056
Light intensity influence on strontium Titanate based photo-electrochemical cells
Hertkorn, D.; Megnin, C.; Müller, C.; Hanemann, T.; Reinecke, H.
2017. Ceramics silikáty, 61 (3), 179–182. doi:10.13168/cs.2017.0014
Automated Misalignment Compensating Interconnects Based on Self-Written Waveguides
Günther, A.; Schneider, S.; Rezem, M.; Wang, Y.; Gleissner, U.; Hanemann, T.; Overmeyer, L.; Reithmeier, E.; Rahlves, M.; Roth, B.
2017. Journal of lightwave technology, 35 (13), 2678–2684. doi:10.1109/JLT.2017.2692305
Development and characterization of adjustable refractive index scattering epoxy acrylate polymer layers
Eiselt, T.; Preinfalk, J.; Gleißner, U.; Lemmer, U.; Hanemann, T.
2017. Optical engineering, 56 (3), 037105–1. doi:10.1117/1.OE.56.3.037105
Large-Area Screen-Printed Internal Extraction Layers for Organic Light-Emitting Diodes
Preinfalk, J. B.; Eiselt, T.; Wehlus, T.; Rohnacher, V.; Hanemann, T.; Gomard, G.; Lemmer, U.
2017. ACS photonics, 4 (4), 928–933. doi:10.1021/acsphotonics.6b01027
Refractive index increase of acrylate-based polymers by adding soluble aromatic guest-molecules
Gleißner, U.; Bonaus, S.; Megnin, C.; Hanemann, T.
2017. Polymers for advanced technologies, 28 (4), 506–510. doi:10.1002/pat.3920
Eignung des Kunststoff-Freiformens für metallische Bauteile
Spiller, Q.; Müller, T.; Plewa, K.; Hanemann, T.; Fleischer, J.
2016. VDI-Z integrierte Produktion, (11), 1–2
Development and characterization of high refractive index and high scattering acrylate polymer layers
Eiselt, T.; Gomard, G.; Preinfalk, J.; Gleißner, U.; Lemmer, U.; Hanemann, T.
2016. Optical engineering, 55 (11), Art. Nr. 117106. doi:10.1117/1.OE.55.11.117106
Surface Analytical Study Regarding the Solid Electrolyte Interphase Composition of Nanoparticulate SnO₂ Anodes for Li-Ion Batteries
Winkler, V.; Kilibarda, G.; Schlabach, S.; Szabo, D. V.; Hanemann, T.; Bruns, M.
2016. The journal of physical chemistry <Washington, DC> / C, 120 (43), 24706–24714. doi:10.1021/acs.jpcc.6b06662
Ink-jet printed fluorescent materials as light sources for planar optical waveguides on polymer foils
Bollgruen, P.; Gleissner, U.; Wolfer, T.; Megnin, C.; Mager, D.; Overmeyer, L.; Korvink, J. G.; Hanemann, T.
2016. Optical engineering, 55 (10), Art. Nr. 107107. doi:10.1117/1.OE.55.10.107107
Fluorescent rare-earth complex doped acrylate based host-guest system for optical applications fabricated by microstructure technologies
Gleißner, U.; Megnin, C.; Hanemann, T.
2016. DGaO-Proceedings, 117. Tagung, P52
The co-casting process: A new manufacturing process for ceramic multilayer devices
Medesi, A. J.; Hagedorn, F.; Schepperle, M.; Megnin, C.; Hanemann, T.
2016. Sensors and actuators <Lausanne> / A, 251, 266–275. doi:10.1016/j.sna.2016.07.033
The influence of photo initiators on refractive index and glass transition temperature of optically and rheologically adjusted acrylate based polymers
Gleißner, U.; Hanemann, T.; Megnin, C.; Wieland, F.
2016. Polymers for advanced technologies, 27 (10), 1294–1300. doi:10.1002/pat.3793
Comparative surface analysis study of the solid electrolyte interphase formation on graphite anodes in lithium-ion batteries depending on the electrolyte composition [in press.]
Winkler, V.; Hanemann, T.; Bruns, M.
2016. Surface and interface analysis. doi:10.1002/sia.6139
Investigation of ternary mixtures containing 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)azanide, ethylene carbonate and lithium bis(trifluoromethanesulfonyl)azanide
Hofmann, A.; Migeot, M.; Arens, L.; Hanemann, T.
2016. International Journal of Molecular Sciences, 17 (5), 670. doi:10.3390/ijms17050670
Lowering the sintering temperature of barium strontium titanate bulk ceramics by barium strontium titanate-gel and BaCu(B₂O₅)
Gleissner, U.; Megnin, C.; Benkler, M.; Hertkorn, D.; Elsenheimer, H. C.; Schumann, K.; Paul, F.; Hanemann, T.
2016. Ceramics silikáty, 60 (1), 1–11. doi:10.13168/cs.2016.0001
Optically and rheologically tailored polymers for applications in integrated optics
Gleißner, U.; Khatri, B.; Megnin, C.; Sherman, S.; Xiao, Y.; Hofmann, M.; Günther, A.; Rahlves, M.; Roth, B.; Zappe, H.; Hanemann, T.
2016. Sensors and Actuators, A: Physical, 241, 224–230. doi:10.1016/j.sna.2016.02.029
Tailoring Optical and Rheological Properties of Host-guest Systems Based on an Epoxy Acrylate
Gleißner, U.; Hanemann, T.
2016. Materials Today: Proceedings, 3 (2), 289–293. doi:10.1016/j.matpr.2016.01.071
Investigation of Binary Mixtures Containing 1-Ethyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)azanide and Ethylene Carbonate
Hofmann, A.; Migeot, M.; Hanemann, T.
2016. Journal of Chemical and Engineering Data, 61 (1), 114–123. doi:10.1021/acs.jced.5b00338
Einfluss der Masseaufbereitung auf die Verarbeitungseigenschaften für das Mikro-Pulverspritzgießen [Loseblatt-Sammlung]
Piotter, V.; Hanemann, T.
2015. Technische Keramische Werkstoffe - 147.Ergänzungslieferung - Juli 2015. Hrsg.: J. Kriegesmann, Kapitel 3.4.8.10, Dt. Wirtschaftsdienst
Viscosity and refractive index adjustment of poly(methyl methacrylate-co-ethyleneglycol dimethacrylate) for application in microoptics
Hanemann, T.; Honnef, K.
2015. Polymers for advanced technologies, 26 (4), 294–299. doi:10.1002/pat.3428
New TiO₂ double layer nano particulate photo anode for highly efficient dye sensitized solar cells (DSSC)
Kilibarda, G.; Schlabach, S.; Szabo, D. V.; Hanemann, T.
2015. International Journal of Electrochemical Science, 10 (10), 9988–10002
Investigation of the oxidative stability of Li-ion battery electrolytes using cathode materials
Hofmann, A.; Werth, F.; Höweling, A.; Hanemann, T.
2015. ECS electrochemistry letters, 4 (12), A141-A144. doi:10.1149/2.0071512eel
Interaction of high flash point electrolytes and PE-based separators for Li-ion batteries
Hofmann, A.; Kaufmann, C.; Müller, M.; Hanemann, T.
2015. International Journal of Molecular Sciences, 16 (9), 20258–20276. doi:10.3390/ijms160920258
A novel co-casting process for piozoelectric multilayer ceramics with silver inner electrodes
Medesi, A. J.; Meier, H.; Megnin, C.; Hanemann, T.
2015. Procedia engineering, 120, 124–129. doi:10.1016/j.proeng.2015.08.581
Polymers with customizable optical and rheological properties for printable single-mode waveguides
Gleißner, U.; Sherman, S.; Megnin, C.; Zappe, H.; Hanemann, T.
2015. Procedia engineering, 120, 3–6. doi:10.1016/j.proeng.2015.08.553
Novel electrolyte mixtures based on dimmethyl sulfone, ethylene carbonate and LiPF₆ for lithium-ion batteries
Hofmann, A.; Hanemann, T.
2015. Journal of power sources, 298, 322–330. doi:10.1016/j.jpowsour.2015.08.071
Electrolyte mixtures based on ethylene carbonate and dimethyl sulfone for Li-ion batteries with improved safety characteristics
Hofmann, A.; Migeot, M.; Thißen, E.; Schulz, M.; Heinzmann, R.; Indris, S.; Bergfeldt, T.; Lei, B.; Ziebert, C.; Hanemann, T.
2015. ChemSusChem, 8, 1892–1900. doi:10.1002/cssc.201500263
Cladded self-written multimode step-index waveguides using a one-polymer approach
Günther, A.; Petermann, A. B.; Gleissner, U.; Hanemann, T.; Reithmeier, E.; Rahlves, M.; Meinhardt-Wollweber, M.; Morgner, U.; Roth, B.
2015. Optics letters, 40 (8), 1830–1833. doi:10.1364/OL.40.001830
Morphology and oxygen vacancy investigation of strontium titanate-based photo electrochemical cells
Hertkorn, D.; Benkler, M.; Gleißner, U.; Büker, F.; Megnin, C.; Müller, C.; Hanemann, T.; Reinecke, H.
2015. Journal of materials science, 50 (1), 40–48. doi:10.1007/s10853-014-8563-y
Low temperature sintering of PZT
Medesi, A.; Greiner, T.; Benkler, M.; Megnin, C.; Hanemann, T.
2014. Journal of physics / Conference Series, 557, 012132/1–5. doi:10.1088/1742-6596/557/1/012132
Mixtures of ionic liquid and sulfolane as electrolytes for Li-ion batteries
Hofmann, A.; Schulz, M.; Indris, S.; Heinzmann, R.; Hanemann, T.
2014. Electrochimica acta, 147, 704–711. doi:10.1016/j.electacta.2014.09.111
Tunig the optical and rheological properties of host-guest systems based on an epoxy acrylate and MMA
Gleißner, U.; Honnef, K.; Hanemann, T.
2014. Procedia Technology, 15, 161–167. doi:10.1016/j.protcy.2014.09.068
Polymer-based route to ferroelectric lead strontium titanate thin films
Benkler, M.; Hobmaier, J.; Gleißner, U.; Medesi, A.; Hertkorn, D.; Hanemann, T.
2014. Journal of applied polymer science, 131, 40901/1–7. doi:10.1002/app.40901
LIGA2.X process for mass production of single polymeric LIGA micro parts
Heneka, J.; Guttmann, M.; Plewa, K.; Mohr, J.; Hanemann, T.; Saile, V.
2014. Microsystem technologies, 20, 1955–1960. doi:10.1007/s00542-013-2015-5
Ferroelectric thin film fabrication by direct UV-lithography
Benkler, M.; Paul, F.; Schott, J.; Hanemann, T.
2014. Microsystem technologies, 20, 1859–1867. doi:10.1007/s00542-013-1963-0
Anodic aluminum dissolution in conducting salt containing electrolytes for lithium-ion batteries
Hofmann, A.; Schulz, M.; Winkler, V.; Hanemann, T.
2014. Journal of the Electrochemical Society, 161 (3), A431-A438. doi:10.1149/2.094403jes
Electrochemical performance of tin-based nano-composite electrodes using a vinylene carbonate-containing electrolyte for Li-ion cells
Kilibarda, G.; Schlabach, S.; Winkler, V.; Bruns, M.; Hanemann, T.; Szabo, D. V.
2014. Journal of power sources, 263 (October), 145–153. doi:10.1016/j.jpowsour.2014.04.030
Novel Conductive Gel Polymers Based on Acrylates and Ionic Liquids
Tosoni, M.; Schulz, M.; Hanemann, T.
2014. International Journal of Electrochemical Science, 9 (7), 3602–3617
Modeling of the electrical properties of bidirectional alkaline air electrodes
Büker, F.; Müller, C.; Hanemann, T.; Hertkorn, D.; Reinecke, H.
2014. Journal of the Electrochemical Society, 161, A1019-A1022. doi:10.1149/2.063406jes
Polymethylmethacrylate/polyethyleneglycol-based partially water soluble binder system for micro ceramic injection moulding
Hanemann, T.; Weber, O.
2014. Microsystem technologies, 20, 51–58. doi:10.1007/s00542-013-1767-2
Viscosity and refractive index tailored methacrylate-based polymers
Hanemann, T.; Honnef, K.
2014. Journal of applied polymer science, 131, 40194/1–7. doi:10.1002/app.40194
Anodic aluminum dissolution of LiTFSA containing electrolytes for Li-ion-batteries
Hofmann, A.; Merklein, L.; Schulz, M.; Hanemann, T.
2014. Electrochimica acta, 116, 388–395. doi:10.1016/j.electacta.2013.11.085
Metal-ceramic-composite casting of complex micro components
Buqezi-Ahmeti, D.; Maisenbacher, J.; Gibmeier, J.; Hanemann, T.
2013. Microsystem Technologies, 19 (2), 159–165. doi:10.1007/s00542-012-1624-8
Influence of Environmental Temperature on the Electrochemical Performance of a Tin-Based Nano-Electrode in Lithium Ion Cells
Kilibarda, G.; Schlabach, S.; Hanemann, T.; Szabo, D. V.
2013. International journal of electrochemical science, 8 (5), 6212–6219
Effect of Conducting Salts in Ionic Liquid based Electrolytes: Viscosity, Conductivity, and Li-Ion Cell Studies
Hofmann, A.; Schulz, M.; Hanemann, T.
2013. International journal of electrochemical science, 8 (8), 10170–10189
Nanoparticle surface polarity influence on the flow behavior of polymer matrix composites
Hanemann, T.
2013. Polymer Composites, 34, 1425–1432. doi:10.1002/pc.22428
Thickness variation of electrophoretically deposited strontium titanate films for photoelectrochemical energy conversion
Hertkorn, D.; Elsenheimer, H. C.; Bruch, R.; Paul, F.; Müller, C.; Hanemann, T.; Reinecke, H.
2013. Journal of Applied Physics, 114, 027020/1–5. doi:10.1063/1.4811817
Investigation of the degradation of SnO₂ electrodes for use in Li-ion cells
Kilibarda, G.; Szabo, D. V.; Schlabach, S.; Winkler, V.; Bruns, M.; Hanemann, T.
2013. Journal of power sources, 233, 139–147. doi:10.1016/j.jpowsour.2013.01.099
Green-conscious ceramic injection moulding
Weber, O.; Hanemann, T.
2013. Ceramic engineering and science proceedings, 33 (8), 63–71
Ceramic injection moulding using a partially water-soluble binder system: Effect of back-bone polymers on the process
Weber, O.; Hanemann, T.
2013. Ceramic engineering and science proceedings, 33 (8), 53–61
Gel electrolytes based on ionic liquids for advanced lithium polymer batteries
Hofmann, A.; Schulz, M.; Hanemann, T.
2013. Electrochimica Acta, 89, 823–831. doi:10.1016/j.electacta.2012.10.144
Suppressed lithiumm dendrite growth in lithium batteries using ionic liquid electrolytes: Investigation by electrochemical impedance spectroscopy, scanning electron microscopy, and in situ ⁷Li nuclear magnetic resonance spectroscopy
Schweikert, N.; Hofmann, A.; Schulz, M.; Scheuermann, M.; Boles, S. T.; Hanemann, T.; Hahn, H.; Indris, S.
2013. Journal of Power Sources, 228, 237–243. doi:10.1016/j.jpowsour.2012.11.124
Polymer nanocomposites for optical applications
Szabo, D. V.; Hanemann, T.
2012. Gao, F. [Hrsg.] Advances in Polymer Nanocomposites : Types and Applications Oxford [u.a.] : Woodhead Publ., 2012 (Woodhead Publishing in Materials), 567–604
Realization of embedded capacitors using polymer matrix composites with barium titanate as high-k-active filler
Hanemann, T.; Schumacher, B.
2012. Microsystem Technologies, 18, 745–751. doi:10.1007/s00542-012-1458-4
Simulation of micro powder injection moulding : Powder segregation and yield stress effects during form filling
Greiner, A.; Kauzlaric, D.; Korvink, J. G.; Heldele, R.; Schulz, M.; Piotter, V.; Hanemann, T.; Weber, O.; Haußelt, J.
2011. Journal of the European Ceramic Society, 31 (14), 2525–2534. doi:10.1016/j.jeurceramsoc.2011.02.008
Fatty acid surfactant structure-feedstock flow properties: correlation for high-pressure ceramic injection molding
Hanemann, T.; Heldele, R.
2011. International Journal of Applied Ceramic Technology, 8, 1296–1304. doi:10.1111/j.1744-7402.2011.02612.x
Tailoring the optical and thermomechanical properties of polymer host-guest systems
Hanemann, T.; Honnef, K.
2011. Journal of Applied Polymer Science, 122, 3514–3519. doi:10.1002/app.34759
Dielectric property improvement of polymer-nanosized strontium titanate-composites for applications in microelectronics
Hanemann, T.; Gesswein, H.; Schumacher, B.
2011. Microsystem Technologies, 17, 1529–1535. doi:10.1007/s00542-011-1322-y
Influence of stearic acid concentration on the processing of ZrO₂-containing feedstocks suitable for micropowder injection molding
Hanemann, T.; Heldele, R.; Mueller, T.; Haußelt, J.
2011. International Journal of Applied Ceramic Technology, 8, 865–872. doi:10.1111/j.1744-7402.2010.02519.x
New methacrylate-based feedstock systems for micro powder injection moulding
Hanemann, T.; Honnef, K.; Müller, T.; Weber, O.
2011. Microsystem Technologies, 17, 451–457. doi:10.1007/s00542-011-1243-9
Development of new polymer-BaTiO₃-composites with improved permittivity for embedded capacitors
Hanemann, T.; Gesswein, H.; Schumacher, B.
2011. Microsystem Technologies, 17, 195–201. doi:10.1007/s00542-010-1197-3
Nanoparticles in polymer-matrix composites
Schlabach, S.; Ochs, R.; Hanemann, T.; Szabo, D. V.
2011. Microsystem technologies, 17, 183–193. doi:10.1007/s00542-010-1176-8
Development of two-component micropowder injection molding (2C MicroPIM): characteristics of applicable materials
Ruh, A.; Hanemann, T.; Heldele, R.; Piotter, V.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2011. International Journal of Applied Ceramic Technology, 8, 194–202. doi:10.1111/j.1744-7402.2009.02427.x
Polymer-nanoparticle composites: From synthesis to modern applications
Hanemann, T.; Szabo, D. V.
2010. Materials, 3, 3468–3517. doi:10.3390/ma3063468
Temperature treatment of nano-scaled barium titanate filler to improve the dielectric properties of high-k polymer based composites
Schumacher, B.; Geßwein, H.; Haußelt, J.; Hanemann, T.
2010. Microelectronic Engineering, 87, 1978–83. doi:10.1016/j.mee.2009.12.018
Modern alchemy: ceramic feedstock optimization by surfactant screening
Hanemann, T.; Heldele, R.
2010. Ceramic Forum International - Berichte der Deutschen Keramischen Gesellschaft, 87 (4), E38-E40
Metal and ceramic parts fabricated by microminiature powder injection molding
Piotter, V.; Hanemann, T.; Heldele, R.; Müller, M.; Müller, T.; Plewa, K.; Ruh, A.
2010. International Journal of Powder Metallurgy, 46 (2), 21–28
Tuning the dielectric constant of polymers using organic dopants
Hanemann, T.; Schumacher, B.; Haußelt, J.
2010. Microelectronic Engineering, 87, 533–36. doi:10.1016/j.mee.2009.05.015
Polymerization conditions influence on the thermomechanical and dielectric properties of unsaturated polyester-styrene-copolymers
Hanemann, T.; Schumacher, B.; Haußelt, J.
2010. Microelectronic Engineering, 87, 15–19. doi:10.1016/j.mee.2009.05.014