Publikationsliste
On the characterization of MPA CVD diamond for fracture toughness measurements
Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
2024. 49th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Perth, Australia, September 1–6, 2024
Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
2024. 49th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Perth, Australia, September 1–6, 2024
On the characterization of MPA CVD diamond for fracture toughness measurements
Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
2024. 49th IEEE International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Institute of Electrical and Electronics Engineers (IEEE)
Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
2024. 49th IEEE International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Institute of Electrical and Electronics Engineers (IEEE)
Towards fracture toughness measurements of MPA CVD diamond in nuclear fusion devices
Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T. A.; Strauss, D.; Wild, C.; Woerner, E.
2023. 48th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2023), Montreal, Canada, September 17–22, 2023
Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T. A.; Strauss, D.; Wild, C.; Woerner, E.
2023. 48th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2023), Montreal, Canada, September 17–22, 2023
Stability of Two-Phase Microstructures in Al-Containing Refractory Compositionally Complex Alloys
Yang, L.; Sen, S.; Vikram, R. J.; Schliephake, D.; Laube, S.; Pramanik, A.; Chauhan, A.; Gorr, B.; Heilmaier, M.; Kauffmann, A.
2024, August 20. 32nd International Materials Research Congress (IMRC 2024), Cancún, Mexico, August 18–23, 2024
Yang, L.; Sen, S.; Vikram, R. J.; Schliephake, D.; Laube, S.; Pramanik, A.; Chauhan, A.; Gorr, B.; Heilmaier, M.; Kauffmann, A.
2024, August 20. 32nd International Materials Research Congress (IMRC 2024), Cancún, Mexico, August 18–23, 2024
Experimentelle Charakterisierung und Simulation der Schädigungsentwicklung in Vorgerüst-Arbeitswalzen
Fota, K.; Cestonaro, A.; Heisterkamp, P.; Spannagel, F.; Jacke, H.; Gorr, B.; Christ, H.-J.
2019. Hrsg.: H.-J. Christ Prüftechnik – Kennwertermittlung – Schadensvermeidung, Tagung Werkstoffprüfung 2019, 03.-04. Dez. 2019 in Neu-Ulm, INVENTUM GmbH, Sankt Augistin, 2019, 385–390
Fota, K.; Cestonaro, A.; Heisterkamp, P.; Spannagel, F.; Jacke, H.; Gorr, B.; Christ, H.-J.
2019. Hrsg.: H.-J. Christ Prüftechnik – Kennwertermittlung – Schadensvermeidung, Tagung Werkstoffprüfung 2019, 03.-04. Dez. 2019 in Neu-Ulm, INVENTUM GmbH, Sankt Augistin, 2019, 385–390
Oxidation Performance of Mo‐Si‐B Alloys: Implications through Alloying and Pre‐Treatment
Burk, S.; Gorr, B.; Christ, H.-J.
2011. Supplemental Proceedings – Materials Processing and Energy Materials, 627–634, John Wiley and Sons. doi:10.1002/9781118062111.ch72
Burk, S.; Gorr, B.; Christ, H.-J.
2011. Supplemental Proceedings – Materials Processing and Energy Materials, 627–634, John Wiley and Sons. doi:10.1002/9781118062111.ch72
High temperature oxidation of multiphase Mo-Si-B-X alloys
Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ:, H.-J.
2008. Managing Corrosion for Sustainability, Proc. of EUROCORR 2008 – The European Corrosion Congress, 7.-11. September 2008, Edinburgh, UK, European Federation of Corrosion
Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ:, H.-J.
2008. Managing Corrosion for Sustainability, Proc. of EUROCORR 2008 – The European Corrosion Congress, 7.-11. September 2008, Edinburgh, UK, European Federation of Corrosion
Characterizing the Carburization of Ethylene Pyrolysis Tubes by Means of Non-Destructive Magnetic Measurements and Thermodynamics Calculations
Trindade, V. B.; Silva, I. C.; Gorr, B.; Dille, J.; Jacques, P. J.; Rebello, J. M. A.; Bruno, A. C.; Christ, H.-J.
2007. Annual Congress of the European Federation of Corrosion (EUROCORR) 2007, Annual Congress of the European Federation of Corrosion (2007), Freiburg im Breisgau, Deutschland, 09.09.2007–13.09.2007
Trindade, V. B.; Silva, I. C.; Gorr, B.; Dille, J.; Jacques, P. J.; Rebello, J. M. A.; Bruno, A. C.; Christ, H.-J.
2007. Annual Congress of the European Federation of Corrosion (EUROCORR) 2007, Annual Congress of the European Federation of Corrosion (2007), Freiburg im Breisgau, Deutschland, 09.09.2007–13.09.2007
Effect of Different Cr and Ni Additions on Oxidation Behavior of Co-Re-Based Alloys
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2020. JOM, 72 (1), 393–402. doi:10.1007/s11837-019-03868-z
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2020. JOM, 72 (1), 393–402. doi:10.1007/s11837-019-03868-z
The effect of Ni and Si additions on the oxidation behaviour of Co-17Re-18Cr alloys
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2019. Corrosion Science, 159, Artkl.Nr.: 108135. doi:10.1016/j.corsci.2019.108135
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2019. Corrosion Science, 159, Artkl.Nr.: 108135. doi:10.1016/j.corsci.2019.108135
Influence of σ Phase on the Allotropic Transformation of the Matrix in Co-Re-Cr-Based Alloys with Ni Addition
Dörries, K.; Mukherji, D.; Rösler, J.; Esleben, K.; Gorr, B.; Christ, H.-J.
2018. Metals, 8 (9), Artkl.Nr.: 706. doi:10.3390/met8090706
Dörries, K.; Mukherji, D.; Rösler, J.; Esleben, K.; Gorr, B.; Christ, H.-J.
2018. Metals, 8 (9), Artkl.Nr.: 706. doi:10.3390/met8090706
The effect of Ni additions on the oxidation behaviour of Co–Re–Cr high-temperature alloys
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2018. Materials at High Temperatures, 35 (1-3), 177–186. doi:10.1080/09603409.2017.1392111
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2018. Materials at High Temperatures, 35 (1-3), 177–186. doi:10.1080/09603409.2017.1392111
Effect of Atmosphere and Sample Thickness on Kinetics, Microstructure, and Compressive Stresses of Chromia Scale Grown on Ni–25Cr
Simon, D.; Gorr, B.; Christ, H. J.
2017. Oxidation of Metals, 87 (3-4), 417–429. doi:10.1007/s11085-016-9702-4
Simon, D.; Gorr, B.; Christ, H. J.
2017. Oxidation of Metals, 87 (3-4), 417–429. doi:10.1007/s11085-016-9702-4
Scaling Kinetics and Scale Microstructure of Chromia Scales Formed on Ni-25%Cr Model Alloy during Oxidation in H 2 o-Containing High and Low pO 2 Test Gas at 1000°C
Hänsel, M.; Shemet, V.; Turan, E.; Kijatkin, I.; Simon, D.; Gorr, B.; Christ, H.-J.
2015. ECS Transactions, 66 (18), 1–21. doi:10.1149/06618.0001ecst
Hänsel, M.; Shemet, V.; Turan, E.; Kijatkin, I.; Simon, D.; Gorr, B.; Christ, H.-J.
2015. ECS Transactions, 66 (18), 1–21. doi:10.1149/06618.0001ecst
Microstructure and Oxidation Mechanism Evolution of Co–17Re–25Cr–2Si in the Temperature Range 800–1,100 °C
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2015. Oxidation of Metals, 83 (5-6), 465–483. doi:10.1007/s11085-014-9515-2
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2015. Oxidation of Metals, 83 (5-6), 465–483. doi:10.1007/s11085-014-9515-2
Effect of specimen thickness on chromia scaling of Ni25Cr in N 2 –O 2 –H 2 O test gases at 1000°C
Hänsel, M.; Turan, E.; Shemet, V.; Grüner, D.; Breuer, U.; Simon, D.; Gorr, B.; Christ, H.-J.; Quadakkers, W. J.
2015. Materials at High Temperatures, 32 (1-2), 160–166. doi:10.1179/0960340914Z.00000000092
Hänsel, M.; Turan, E.; Shemet, V.; Grüner, D.; Breuer, U.; Simon, D.; Gorr, B.; Christ, H.-J.; Quadakkers, W. J.
2015. Materials at High Temperatures, 32 (1-2), 160–166. doi:10.1179/0960340914Z.00000000092
Effect of in-situ gas changes on thermally grown chromia scales formed on Ni–25Cr alloy at 1000°C in atmospheres with and without water vapour
Simon, D.; Gorr, B.; Hänsel, M.; Shemet, V.; Christ, H.-J.; Quadakkers, W. J.
2015. Materials at High Temperatures, 32 (1-2), 238–247. doi:10.1179/0960340914Z.000000000108
Simon, D.; Gorr, B.; Hänsel, M.; Shemet, V.; Christ, H.-J.; Quadakkers, W. J.
2015. Materials at High Temperatures, 32 (1-2), 238–247. doi:10.1179/0960340914Z.000000000108
The effect of alloyed nickel on the short-term high temperature oxidation behaviour of Co–Re–Cr-based alloys
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2015. Corrosion Science, 93, 19–26. doi:10.1016/j.corsci.2015.01.004
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2015. Corrosion Science, 93, 19–26. doi:10.1016/j.corsci.2015.01.004
Oxidation mechanisms of lanthanum-alloyed Mo–Si–B
Majumdar, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
2014. Corrosion Science, 88, 360–371. doi:10.1016/j.corsci.2014.07.058
Majumdar, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
2014. Corrosion Science, 88, 360–371. doi:10.1016/j.corsci.2014.07.058
Thermodynamic calculations in the development of high-temperature Co–Re-based alloys
Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2014. Journal of Alloys and Compounds, 582, 50–58. doi:10.1016/j.jallcom.2013.07.055
Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2014. Journal of Alloys and Compounds, 582, 50–58. doi:10.1016/j.jallcom.2013.07.055
Optimization of Cr-Content for High-Temperature Oxidation Behavior of Co–Re–Si-Base Alloys
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2013. Oxidation of Metals, 80 (1-2), 49–59. doi:10.1007/s11085-013-9369-z
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2013. Oxidation of Metals, 80 (1-2), 49–59. doi:10.1007/s11085-013-9369-z
Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
Gorr, B.; Burk, S.; Depka, T.; Somsen, C.; Abu-Samra, H.; Christ, H.-J.; Eggeler, G.
2012. International Journal of Materials Research, 103 (1), 24–30. doi:10.3139/146.110626
Gorr, B.; Burk, S.; Depka, T.; Somsen, C.; Abu-Samra, H.; Christ, H.-J.; Eggeler, G.
2012. International Journal of Materials Research, 103 (1), 24–30. doi:10.3139/146.110626
High-Temperature Oxidation Behaviour of Co-Re-Cr-Based Alloys: Limitations and Ways to Improve
Gorr, B.; Christ, H.-J.
2011. Advanced Materials Research, 278, 545–550. doi:10.4028/www.scientific.net/AMR.278.545
Gorr, B.; Christ, H.-J.
2011. Advanced Materials Research, 278, 545–550. doi:10.4028/www.scientific.net/AMR.278.545
Oxidation behavior of Mo-Si-B-(X) alloys: Macro- and microalloying (X= Cr, Zr, La2O3)
Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
2011. JOM, 63 (12), 32–36. doi:10.1007/s11837-011-0203-2
Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
2011. JOM, 63 (12), 32–36. doi:10.1007/s11837-011-0203-2
High temperature oxidation of Mo–Si–B alloys: Effect of low and very low oxygen partial pressures
Burk, S.; Gorr, B.; Christ, H.-J.
2010. Acta Materialia, 58 (18), 6154–6165. doi:10.1016/j.actamat.2010.07.034
Burk, S.; Gorr, B.; Christ, H.-J.
2010. Acta Materialia, 58 (18), 6154–6165. doi:10.1016/j.actamat.2010.07.034
Effect of Zr Addition on the High-Temperature Oxidation Behaviour of Mo–Si–B Alloys
Burk, S.; Gorr, B.; Trindade, V. B.; Christ, H.-J.
2010. Oxidation of Metals, 73 (1-2), 163–181. doi:10.1007/s11085-009-9175-9
Burk, S.; Gorr, B.; Trindade, V. B.; Christ, H.-J.
2010. Oxidation of Metals, 73 (1-2), 163–181. doi:10.1007/s11085-009-9175-9
The Effect of Pre-Oxidation Treatment on the High-Temperature Oxidation of Co–Re–Cr Model Alloys at Laboratory Air
Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
2010. Oxidation of Metals, 74 (5-6), 239–253. doi:10.1007/s11085-010-9213-7
Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
2010. Oxidation of Metals, 74 (5-6), 239–253. doi:10.1007/s11085-010-9213-7
High‐temperature oxidation behaviour of model CoReCr alloys at low oxygen partial pressure
Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
2010. Materials and Corrosion, 61 (9), 741–747. doi:10.1002/maco.200905412
Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
2010. Materials and Corrosion, 61 (9), 741–747. doi:10.1002/maco.200905412
Metallic materials for structural applications beyond nickel-based superalloys
Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
2009. JOM, 61 (7), 61–67. doi:10.1007/s11837-009-0106-7
Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
2009. JOM, 61 (7), 61–67. doi:10.1007/s11837-009-0106-7
High temperature oxidation of mechanically alloyed Mo–Si–B alloys
Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ, H.-J.
2009. Corrosion Engineering, Science and Technology, 44 (3), 168–175. doi:10.1179/174327809X419122
Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ, H.-J.
2009. Corrosion Engineering, Science and Technology, 44 (3), 168–175. doi:10.1179/174327809X419122
Oxidation behaviour of model Co–Re alloys during exposure to laboratory air at 1000°C
Gorr, B.; Trindade, V. B.; Burk, S.; Christ, H.-J.
2009. Corrosion Engineering, Science and Technology, 44 (3), 176–181. doi:10.1179/174327809X419131
Gorr, B.; Trindade, V. B.; Burk, S.; Christ, H.-J.
2009. Corrosion Engineering, Science and Technology, 44 (3), 176–181. doi:10.1179/174327809X419131
Oxidation behaviour of experimental Co–Re-base alloys in laboratory air at 1000°C
Klauke, M.; Mukherji, D.; Gorr, B.; da Trindade Filho, V. B.; Rösler, J.; Christ, H.-J.
2009. International Journal of Materials Research, 100 (1), 104–111. doi:10.3139/146.101792
Klauke, M.; Mukherji, D.; Gorr, B.; da Trindade Filho, V. B.; Rösler, J.; Christ, H.-J.
2009. International Journal of Materials Research, 100 (1), 104–111. doi:10.3139/146.101792
Oxidation Behaviour of Model Cobalt-Rhenium Alloys During Short-Term Exposure to Laboratory Air at Elevated Temperature
Gorr, B.; Trindade, V.; Burk, S.; Christ, H.-J.; Klauke, M.; Mukherji, D.; Rösler, J.
2009. Oxidation of Metals, 71 (3-4), 157–172. doi:10.1007/s11085-008-9133-y
Gorr, B.; Trindade, V.; Burk, S.; Christ, H.-J.; Klauke, M.; Mukherji, D.; Rösler, J.
2009. Oxidation of Metals, 71 (3-4), 157–172. doi:10.1007/s11085-008-9133-y
Experimental analysis and computer‐based simulation of nitridation of Ni‐base alloys—the effect of a pre‐oxidation treatment
Trindade, V. B.; Krupp, U.; Gorr, B.; Kaczorowski, D.; Girardin, G.; Christ, H.-J.
2008. Materials and Corrosion, 59 (7), 602–608. doi:10.1002/maco.200804144
Trindade, V. B.; Krupp, U.; Gorr, B.; Kaczorowski, D.; Girardin, G.; Christ, H.-J.
2008. Materials and Corrosion, 59 (7), 602–608. doi:10.1002/maco.200804144
Development of Refractory Metal-based CCAs with Improved Mechanical Properties
Laube, S.; Schellert, S.; Kauffmann, A.; Gorr, B.; Eggeler, Y. M.; Christ, H.-J.; Heilmaier, M.
2023, November 13. 3rd World Congress on High Entropy Alloys (HEA 2023), Pittsburgh, PA, USA, November 12–15, 2023
Laube, S.; Schellert, S.; Kauffmann, A.; Gorr, B.; Eggeler, Y. M.; Christ, H.-J.; Heilmaier, M.
2023, November 13. 3rd World Congress on High Entropy Alloys (HEA 2023), Pittsburgh, PA, USA, November 12–15, 2023
Steady laminar stagnation flow NH3-H2-air flame at a plane wall: Flame extinction limit and its influence on the thermo-mechanical stress and corrosive behavior of wall materials
Yu, C.; Srikanth, S.; Böhlke, T.; Gorr, B.; Maas, U.
2024. Applications in Energy and Combustion Science, 18, Article no: 100261. doi:10.1016/j.jaecs.2024.100261
Yu, C.; Srikanth, S.; Böhlke, T.; Gorr, B.; Maas, U.
2024. Applications in Energy and Combustion Science, 18, Article no: 100261. doi:10.1016/j.jaecs.2024.100261
Thermodynamics and experimental investigation of the internal oxidation of Fe-Cr-Al-(Y) alloys. PhD dissertation
Miran, S.
2024, January 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167919
Miran, S.
2024, January 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167919
Deformation Mechanisms in FCC and BCC High Entropy Alloys
Heilmaier, M.; Kauffmann, A.; Chen, H.; Schwaiger, R.; Choi, I.-C.; Sas, J.; Weiss, K. P.; Gorr, B.; Müller, F.; Christ, H.-J.; Sarma, V. S.; Freudenberger, J.
2017. Recent Progress in High Entropy and Compositionally Complex Alloys (2017), Bochum, Germany, January 12–13, 2017
Heilmaier, M.; Kauffmann, A.; Chen, H.; Schwaiger, R.; Choi, I.-C.; Sas, J.; Weiss, K. P.; Gorr, B.; Müller, F.; Christ, H.-J.; Sarma, V. S.; Freudenberger, J.
2017. Recent Progress in High Entropy and Compositionally Complex Alloys (2017), Bochum, Germany, January 12–13, 2017
Towards Fracture Toughness Measurements of MPA CVD Diamond in Nuclear Fusion Devices
Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T.; Strauss, D.; Wild, C.; Woerner, E.
2023. 2023 48th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Montreal, QC, 17th-22nd September 2023, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz57677.2023.10298860
Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T.; Strauss, D.; Wild, C.; Woerner, E.
2023. 2023 48th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Montreal, QC, 17th-22nd September 2023, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz57677.2023.10298860
Thermo-mechanische Modellierung interpenetrierender Metall-Keramik Verbundwerkstoffe auf Basis hochhomogener Schaumstrukturen. PhD dissertation
Horny, D.
2023, December 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000165179
Horny, D.
2023, December 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000165179
Influence of the oxidation on the optical properties of Mo-Si-Ti, Ta-Mo-Cr-Al and Ta-Mo-Cr-Ti-Al alloys
Charpentier, L.; Kauffmann, A.; Bêche, E.; Escape, C.; Laube, S.; Schliephake, D.; Esvan, J.; Gorr, B.; Soum-Glaude, A.; Heilmaier, M.
2023. Materials Today Communications, 37, Art.-Nr.: 107056. doi:10.1016/j.mtcomm.2023.107056
Charpentier, L.; Kauffmann, A.; Bêche, E.; Escape, C.; Laube, S.; Schliephake, D.; Esvan, J.; Gorr, B.; Soum-Glaude, A.; Heilmaier, M.
2023. Materials Today Communications, 37, Art.-Nr.: 107056. doi:10.1016/j.mtcomm.2023.107056
Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Kauffmann, A.; Laube, S.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2023. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023
Kauffmann, A.; Laube, S.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2023. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023
Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Kauffmann, A.; Laube, S.
2023, July 4. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023
Kauffmann, A.; Laube, S.
2023, July 4. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023
Lanthanum plumbide as a new neutron multiplier material
Gaisin, R.; Pereslavtsev, P.; Baumgaertner, S.; Seemann, K.; Gaisina, E.; Chakin, V.; Udartsev, S.; Vladimirov, P.; Gorr, B.
2023. Journal of Materials Research and Technology, 24, 3399–3412. doi:10.1016/j.jmrt.2023.03.211
Gaisin, R.; Pereslavtsev, P.; Baumgaertner, S.; Seemann, K.; Gaisina, E.; Chakin, V.; Udartsev, S.; Vladimirov, P.; Gorr, B.
2023. Journal of Materials Research and Technology, 24, 3399–3412. doi:10.1016/j.jmrt.2023.03.211
Liquid metals in concentrating solar power and requirements on structural materials
Schroer, C.; Yurechko-Hussy, M.; Martini, F.; Bonnekoh, C.; Rieth, M.; Gorr, B.; Weisenburger, A.; Heinzel, A.; Fetzer, R.; Müller, G.; Fuchs, J.; Onea, A.; Ruck, S.; Stieglitz, R.
2023, June 13. Helmholtz Energy Conference (2023), Koblenz, Germany, June 12–13, 2023
Schroer, C.; Yurechko-Hussy, M.; Martini, F.; Bonnekoh, C.; Rieth, M.; Gorr, B.; Weisenburger, A.; Heinzel, A.; Fetzer, R.; Müller, G.; Fuchs, J.; Onea, A.; Ruck, S.; Stieglitz, R.
2023, June 13. Helmholtz Energy Conference (2023), Koblenz, Germany, June 12–13, 2023
Pesting-Resistant Mo-Based Alloys
Obert, S.; Schliephake, D.; Hinrichs, F.; Tirunilai, A. S.; Cong, X.; Gorr, B.; Kauffmann, A.; Heilmaier, M.
2022, July 6. Scientific seminar of the Institut für Komplexe Materialien / Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden (IKM / IFW Dresden 2023), Dresden, Germany, July 6, 2022
Obert, S.; Schliephake, D.; Hinrichs, F.; Tirunilai, A. S.; Cong, X.; Gorr, B.; Kauffmann, A.; Heilmaier, M.
2022, July 6. Scientific seminar of the Institut für Komplexe Materialien / Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden (IKM / IFW Dresden 2023), Dresden, Germany, July 6, 2022
Mechanical response of pesting-resistant Mo-Si-Ti alloys for high temperature applications
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Winkens, G.; Wu, H.; Thota, H.; Eggeler, Y.; Mücklich, F.; Engstler, M.; Gorr, B.; Heilmaier, M.
2023, January 6. International Conference on Plasticity, Damage, and Fracture (ICPDF 2023), Punta Cana, Dominican Republic, January 3–9, 2023
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Winkens, G.; Wu, H.; Thota, H.; Eggeler, Y.; Mücklich, F.; Engstler, M.; Gorr, B.; Heilmaier, M.
2023, January 6. International Conference on Plasticity, Damage, and Fracture (ICPDF 2023), Punta Cana, Dominican Republic, January 3–9, 2023
Pesting Resistance in High Mo Containing Alloys
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Gorr, B.; Heilmaier, M.
2022, November 30. MRS Fall Meeting & Exhibit (2022), Boston, MA, USA, November 27–December 2, 2022
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Gorr, B.; Heilmaier, M.
2022, November 30. MRS Fall Meeting & Exhibit (2022), Boston, MA, USA, November 27–December 2, 2022
Formation of rutile (Cr,Ta,Ti)O₂ oxides during oxidation of refractory high entropy alloys in Ta-Mo-Cr-Ti-Al system
Schellert, S.; Weber, M.; Christ, H. J.; Wiktor, C.; Butz, B.; Galetz, M. C.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Gorr, B.
2023. Corrosion Science, 211, Art.Nr. 110885. doi:10.1016/j.corsci.2022.110885
Schellert, S.; Weber, M.; Christ, H. J.; Wiktor, C.; Butz, B.; Galetz, M. C.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Gorr, B.
2023. Corrosion Science, 211, Art.Nr. 110885. doi:10.1016/j.corsci.2022.110885
Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Laube, S.; Kauffmann, A.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y. M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2022. Science and Technology of Advanced Materials, 23 (1), 692–706. doi:10.1080/14686996.2022.2132118
Laube, S.; Kauffmann, A.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y. M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2022. Science and Technology of Advanced Materials, 23 (1), 692–706. doi:10.1080/14686996.2022.2132118
Characterization of the Isothermal and Thermomechanical Fatigue Behavior of a Duplex Steel Considering the Alloy Microstructure
Schellert, S.; Müller, J.; Ohrndorf, A.; Gorr, B.; Butz, B.; Christ, H.-J.
2022. Metals, 12 (7), Art.Nr. 1161. doi:10.3390/met12071161
Schellert, S.; Müller, J.; Ohrndorf, A.; Gorr, B.; Butz, B.; Christ, H.-J.
2022. Metals, 12 (7), Art.Nr. 1161. doi:10.3390/met12071161
Ternary Vss-V3Si-V5SiB2 eutectic formation in the V-Si-B system
Yang, W. G.; Hasemann, G.; Yazlak, M.; Gorr, B.; Schwaiger, R.; Krüger, M.
2022. Journal of Alloys and Compounds, 902, Art.Nr. 163722. doi:10.1016/j.jallcom.2022.163722
Yang, W. G.; Hasemann, G.; Yazlak, M.; Gorr, B.; Schwaiger, R.; Krüger, M.
2022. Journal of Alloys and Compounds, 902, Art.Nr. 163722. doi:10.1016/j.jallcom.2022.163722
Interface reactions of magnetron sputtered Si-based dual layer coating systems as oxidation protection for Mo-Si-Ti alloys
Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Schulz, U.
2022. Surface and Coatings Technology, 444, 128620. doi:10.1016/j.surfcoat.2022.128620
Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Schulz, U.
2022. Surface and Coatings Technology, 444, 128620. doi:10.1016/j.surfcoat.2022.128620
Graded PVD Mo-Si interlayer between Si coating and Mo-Si-B alloys: Investigation of oxidation behaviour
Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Schulz, U.
2021. Corrosion Science, 192, Art.-Nr.: 109843. doi:10.1016/j.corsci.2021.109843
Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Schulz, U.
2021. Corrosion Science, 192, Art.-Nr.: 109843. doi:10.1016/j.corsci.2021.109843
Oxidation mechanism of refractory high entropy alloys Ta-Mo-Cr-Ti-Al with varying Ta content
Schellert, S.; Gorr, B.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Christ, H. J.
2021. Corrosion science, 192, Article no: 109861. doi:10.1016/j.corsci.2021.109861
Schellert, S.; Gorr, B.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Christ, H. J.
2021. Corrosion science, 192, Article no: 109861. doi:10.1016/j.corsci.2021.109861
Microstructure tailoring of Al-containing compositionally complex alloys by controlling the sequence of precipitation and ordering
Laube, S.; Schellert, S.; Srinivasan Tirunilai, A.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Acta Materialia, 218, Article no: 117217. doi:10.1016/j.actamat.2021.117217
Laube, S.; Schellert, S.; Srinivasan Tirunilai, A.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Acta Materialia, 218, Article no: 117217. doi:10.1016/j.actamat.2021.117217
The Effect of Al on the Formation of a CrTaO₄ Layer in Refractory High Entropy Alloys Ta-Mo-Cr-Ti-xAl
Schellert, S.; Gorr, B.; Christ, H.-J.; Pritzel, C.; Laube, S.; Kauffmann, A.; Heilmaier, M.
2021. Oxidation of metals, 96, 333–345. doi:10.1007/s11085-021-10046-7
Schellert, S.; Gorr, B.; Christ, H.-J.; Pritzel, C.; Laube, S.; Kauffmann, A.; Heilmaier, M.
2021. Oxidation of metals, 96, 333–345. doi:10.1007/s11085-021-10046-7
Current Status of Research on the Oxidation Behavior of Refractory High Entropy Alloys
Gorr, B.; Schellert, S.; Müller, F.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Advanced engineering materials, 23 (5), Art.-Nr.: 2001047. doi:10.1002/adem.202001047
Gorr, B.; Schellert, S.; Müller, F.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Advanced engineering materials, 23 (5), Art.-Nr.: 2001047. doi:10.1002/adem.202001047
Effect of Y Additions on the Oxidation Behaviour of Novel Refractory High-Entropy Alloy NbMoCrTiAl at 1000 °C in Air
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Oxidation of metals, 94 (1-2), 147–163. doi:10.1007/s11085-020-09983-6
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Oxidation of metals, 94 (1-2), 147–163. doi:10.1007/s11085-020-09983-6
On the chemical and microstructural requirements for the pesting-resistance of Mo-Si-Ti alloys
Obert, S.; Kauffmann, A.; Seils, S.; Schellert, S.; Weber, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of materials research and technology, 9 (4), 8556–8567. doi:10.1016/j.jmrt.2020.06.002
Obert, S.; Kauffmann, A.; Seils, S.; Schellert, S.; Weber, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of materials research and technology, 9 (4), 8556–8567. doi:10.1016/j.jmrt.2020.06.002
Formation of complex intermetallic phases in novel refractory high-entropy alloys NbMoCrTiAl and TaMoCrTiAl: Thermodynamic assessment and experimental validation
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Laube, S.; Heilmaier, M.
2020. Journal of alloys and compounds, 842, Article no: 155726. doi:10.1016/j.jallcom.2020.155726
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Laube, S.; Heilmaier, M.
2020. Journal of alloys and compounds, 842, Article no: 155726. doi:10.1016/j.jallcom.2020.155726
Effect of Water Vapor on the Oxidation Behavior of the Eutectic High‐Temperature Alloy Mo‐20Si‐52.8Ti
Weber, M.; Gorr, B.; Christ, H.-J.; Obert, S.; Kauffmann, A.; Heilmaier, M.
2020. Advanced engineering materials, 22 (7), Art. Nr.: 2000219. doi:10.1002/adem.202000219
Weber, M.; Gorr, B.; Christ, H.-J.; Obert, S.; Kauffmann, A.; Heilmaier, M.
2020. Advanced engineering materials, 22 (7), Art. Nr.: 2000219. doi:10.1002/adem.202000219
A new strategy to intrinsically protect refractory metal based alloys at ultra high temperatures
Gorr, B.; Müller, F.; Schellert, S.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Corrosion science, 166, Art. Nr.: 108475. doi:10.1016/j.corsci.2020.108475
Gorr, B.; Müller, F.; Schellert, S.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Corrosion science, 166, Art. Nr.: 108475. doi:10.1016/j.corsci.2020.108475
Controlling crystallographic ordering in Mo–Cr–Ti–Al high entropy alloys to enhance ductility
Laube, S.; Chen, H.; Kauffmann, A.; Schellert, S.; Müller, F.; Gorr, B.; Müller, J.; Butz, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of alloys and compounds, 823, Article No.153805. doi:10.1016/j.jallcom.2020.153805
Laube, S.; Chen, H.; Kauffmann, A.; Schellert, S.; Müller, F.; Gorr, B.; Müller, J.; Butz, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of alloys and compounds, 823, Article No.153805. doi:10.1016/j.jallcom.2020.153805
On the oxidation mechanism of refractory high entropy alloys
Müller, F.; Gorr, B.; Christ, H.-J.; Müller, J.; Butz, B.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2019. Corrosion science, 159, Article: 108161. doi:10.1016/j.corsci.2019.108161
Müller, F.; Gorr, B.; Christ, H.-J.; Müller, J.; Butz, B.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2019. Corrosion science, 159, Article: 108161. doi:10.1016/j.corsci.2019.108161
Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta-Nb-Mo-Cr-Ti-Al
Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C. H.; Harding, I.; Kumar, K. S.; Szabo, D. V.; Schlabach, S.; Kauffmann-Weiss, S.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Acta materialia, 176, 123–133. doi:10.1016/j.actamat.2019.07.001
Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C. H.; Harding, I.; Kumar, K. S.; Szabo, D. V.; Schlabach, S.; Kauffmann-Weiss, S.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Acta materialia, 176, 123–133. doi:10.1016/j.actamat.2019.07.001
Constitution, oxidation and creep of eutectic and eutectoid Mo-Si-Ti alloys
Schliephake, D.; Kauffmann, A.; Cong, X.; Gombola, C.; Azim, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Intermetallics, 104, 133–142. doi:10.1016/j.intermet.2018.10.028
Schliephake, D.; Kauffmann, A.; Cong, X.; Gombola, C.; Azim, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Intermetallics, 104, 133–142. doi:10.1016/j.intermet.2018.10.028
Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy
Gorr, B.; Mueller, F.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Schweiger, R.; Szabo, D. V.; Heilmaier, M.
2018. TMS 2018. 147th Annual Meeting & Exhibition Supplemental Proceedings (TMS), 647–659, Springer. doi:10.1007/978-3-319-72526-0_61
Gorr, B.; Mueller, F.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Schweiger, R.; Szabo, D. V.; Heilmaier, M.
2018. TMS 2018. 147th Annual Meeting & Exhibition Supplemental Proceedings (TMS), 647–659, Springer. doi:10.1007/978-3-319-72526-0_61
Contribution of Lattice Distortion to Solid Solution Strengthening in a Series of Refractory High Entropy Alloys
Chen, H.; Kauffmann, A.; Laube, S.; Choi, I.-C.; Schwaiger, R.; Huang, Y.; Lichtenberg, K.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2018. Metallurgical and materials transactions / A, 49 (3), 772–781. doi:10.1007/s11661-017-4386-1
Chen, H.; Kauffmann, A.; Laube, S.; Choi, I.-C.; Schwaiger, R.; Huang, Y.; Lichtenberg, K.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2018. Metallurgical and materials transactions / A, 49 (3), 772–781. doi:10.1007/s11661-017-4386-1
Effect of microalloying with silicon on high temperature oxidation resistance of novel refractory high-entropy alloy Ta-Mo-Cr-Ti-Al
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Materials at high temperatures, 35 (1-3), 168–176. doi:10.1080/09603409.2017.1389115
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Materials at high temperatures, 35 (1-3), 168–176. doi:10.1080/09603409.2017.1389115
Effect of Ti content and nitrogen on the high-temperature oxidation behavior of (Mo,Ti)5Si3
Azim, M. A.; Gorr, B.; Christ, H.-J.; Lenchuk, O.; Albe, K.; Schliephake, D.; Heilmaier, M.
2017. Intermetallics, 90, 103–112. doi:10.1016/j.intermet.2017.05.023
Azim, M. A.; Gorr, B.; Christ, H.-J.; Lenchuk, O.; Albe, K.; Schliephake, D.; Heilmaier, M.
2017. Intermetallics, 90, 103–112. doi:10.1016/j.intermet.2017.05.023
Characterization of Oxidation Kinetics of Mo-Si-B-Based Materials
Azim, M. A.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Koch, U.; Engelhard, M.
2017. Oxidation of metals, 87 (1-2), 89–108. doi:10.1007/s11085-016-9659-3
Azim, M. A.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Koch, U.; Engelhard, M.
2017. Oxidation of metals, 87 (1-2), 89–108. doi:10.1007/s11085-016-9659-3
Combinatorial exploration of the high entropy alloy system Co-Cr-Fe-Mn-Ni
Kauffmann, A.; Stüber, M.; Leiste, H.; Ulrich, S.; Schlabach, S.; Szabo, D. V.; Seils, S.; Gorr, B.; Chen, H.; Seifert, H.-J.; Heilmaier, M.
2017. Surface and coatings technology, 325, 174–180. doi:10.1016/j.surfcoat.2017.06.041
Kauffmann, A.; Stüber, M.; Leiste, H.; Ulrich, S.; Schlabach, S.; Szabo, D. V.; Seils, S.; Gorr, B.; Chen, H.; Seifert, H.-J.; Heilmaier, M.
2017. Surface and coatings technology, 325, 174–180. doi:10.1016/j.surfcoat.2017.06.041
Effect of Ti addition on the thermal expansion anisotropy of Mo₅Si₃
Azim, M. A.; Christ, H.-J.; Gorr, B.; Kowald, T.; Lenchuk, O.; Albe, K.; Heilmaier, M.
2017. Acta materialia, 132, 25–34. doi:10.1016/j.actamat.2017.02.066
Azim, M. A.; Christ, H.-J.; Gorr, B.; Kowald, T.; Lenchuk, O.; Albe, K.; Heilmaier, M.
2017. Acta materialia, 132, 25–34. doi:10.1016/j.actamat.2017.02.066
High-Temperature Oxidation Behavior of Refractory High-Entropy Alloys : Effect of Alloy Composition
Gorr, B.; Müller, F.; Azim, M.; Christ, H.-J.; Müller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Oxidation of metals, 88 (3-4), 339–349. doi:10.1007/s11085-016-9696-y
Gorr, B.; Müller, F.; Azim, M.; Christ, H.-J.; Müller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Oxidation of metals, 88 (3-4), 339–349. doi:10.1007/s11085-016-9696-y
High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb-20Mo-20Cr-20Ti-20Al with and without Si addition
Gorr, B.; Mueller, F.; Christ, H.-J.; Mueller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2016. Journal of alloys and compounds, 688, Part B, 468–477. doi:10.1016/j.jallcom.2016.07.219
Gorr, B.; Mueller, F.; Christ, H.-J.; Mueller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2016. Journal of alloys and compounds, 688, Part B, 468–477. doi:10.1016/j.jallcom.2016.07.219
Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al
Chen, H.; Kauffmann, A.; Gorr, B.; Schliephake, D.; Seemüller, C.; Wagner, J. N.; Christ, H.-J.; Heilmaier, M.
2016. Journal of alloys and compounds, 661, 206–215. doi:10.1016/j.jallcom.2015.11.050
Chen, H.; Kauffmann, A.; Gorr, B.; Schliephake, D.; Seemüller, C.; Wagner, J. N.; Christ, H.-J.; Heilmaier, M.
2016. Journal of alloys and compounds, 661, 206–215. doi:10.1016/j.jallcom.2015.11.050
High-Temperature Creep and Oxidation Behavior of Mo-Si-B Alloys with High Ti Contents
Schliephake, D.; Azim, M.; Klinski-Wetzel, K. von; Gorr, B.; Christ, H.-J.; Bei, H.; George, E. P.; Heilmaier, M.
2014. Metallurgical and materials transactions / A, 45 (3), 1102–1111. doi:10.1007/s11661-013-1944-z
Schliephake, D.; Azim, M.; Klinski-Wetzel, K. von; Gorr, B.; Christ, H.-J.; Bei, H.; George, E. P.; Heilmaier, M.
2014. Metallurgical and materials transactions / A, 45 (3), 1102–1111. doi:10.1007/s11661-013-1944-z
Mechanisms of oxide scale formation on yttrium-alloyed Mo-Si-B containing fine-grained microstructure
Majumdar, S.; Dönges, B.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
2015. Corrosion science, 90, 76–88. doi:10.1016/j.corsci.2014.09.017
Majumdar, S.; Dönges, B.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
2015. Corrosion science, 90, 76–88. doi:10.1016/j.corsci.2014.09.017
Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys
Gorr, B.; Azim, M.; Christ, H.-J.; Mueller, T.; Schliephake, D.; Heilmaier, M.
2015. Journal of alloys and compounds, 624, 270–278. doi:10.1016/j.jallcom.2014.11.012
Gorr, B.; Azim, M.; Christ, H.-J.; Mueller, T.; Schliephake, D.; Heilmaier, M.
2015. Journal of alloys and compounds, 624, 270–278. doi:10.1016/j.jallcom.2014.11.012
Creep Resistance and Oxidation Behavior of Novel Mo-Si-B-Ti Alloys
Azim, M. A.; Schliephake, D.; Hochmuth, C.; Gorr, B.; Christ, H.-J.; Glatzel, U.; Heilmaier, M.
2015. JOM, 67 (11), 2621–2628. doi:10.1007/s11837-015-1560-z
Azim, M. A.; Schliephake, D.; Hochmuth, C.; Gorr, B.; Christ, H.-J.; Glatzel, U.; Heilmaier, M.
2015. JOM, 67 (11), 2621–2628. doi:10.1007/s11837-015-1560-z
Microstructure Evolution in a New Refractory High-Entropy Alloy W-Mo-Cr-Ti-Al
Gorr, B.; Azim, M.; Christ, H.-J.; Chen, H.; Szabo, D. V.; Kauffmann, A.; Heilmaier, M.
2016. Metallurgical and Materials Transactions A, 47, 961–970. doi:10.1007/s11661-015-3246-0
Gorr, B.; Azim, M.; Christ, H.-J.; Chen, H.; Szabo, D. V.; Kauffmann, A.; Heilmaier, M.
2016. Metallurgical and Materials Transactions A, 47, 961–970. doi:10.1007/s11661-015-3246-0
Effect of Ti (Macro-) Alloying on the High-Temperature Oxidation Behavior of Ternary Mo–Si–B Alloys at 820–1,300 °C
Azimovna Azim, M.; Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Bornemann, R.; Bolívar, P. H.
2013. Oxidation of metals, 80 (3-4), 231–242. doi:10.1007/s11085-013-9375-1
Azimovna Azim, M.; Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Bornemann, R.; Bolívar, P. H.
2013. Oxidation of metals, 80 (3-4), 231–242. doi:10.1007/s11085-013-9375-1
High-temperature oxidation behavior of Mo-Si-B-based and Co-Re-Cr-based alloys
Gorr, B.; Wang, L.; Burk, S.; Azim, M.; Majumdar, S.; Christ, H.-J.; Mukherji, D.; Rösler, J.; Schliephake, D.; Heilmaier, M.
2014. Intermetallics, 48, 34–43. doi:10.1016/j.intermet.2013.10.008
Gorr, B.; Wang, L.; Burk, S.; Azim, M.; Majumdar, S.; Christ, H.-J.; Mukherji, D.; Rösler, J.; Schliephake, D.; Heilmaier, M.
2014. Intermetallics, 48, 34–43. doi:10.1016/j.intermet.2013.10.008
Effect of Yttrium Alloying on Intermediate to High-Temperature Oxidation Behavior of Mo-Si-B Alloys
Majumdar, S.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2013. Metallurgical and materials transactions / A, 44 (5), 2243–2257. doi:10.1007/s11661-012-1589-3
Majumdar, S.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2013. Metallurgical and materials transactions / A, 44 (5), 2243–2257. doi:10.1007/s11661-012-1589-3
Metallic materials for structural applications beyond nickel-based superalloys
Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
2009. JOM: The Journal of the Minerals, Metals & Materials Society, 61 (7), 61–67
Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
2009. JOM: The Journal of the Minerals, Metals & Materials Society, 61 (7), 61–67
Oxidation behaviour of Mo-Si-B-(X) alloys: Macro- and Microalloying (X= Cr, Zr, La2O3)
Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
2011. JOM: The Journal of the Minerals, Metals & Materials Society, 63 (12), 32–36
Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
2011. JOM: The Journal of the Minerals, Metals & Materials Society, 63 (12), 32–36
High-temperature oxidation behaviour of a single phase (Mo,Ti)5Si3 (Mo-Si-Ti) alloy
Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Hochmuth, C.; Glatzel, U.
2012. Scripta materialia, 66 (5), 223–226. doi:10.1016/j.scriptamat.2011.10.042
Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Hochmuth, C.; Glatzel, U.
2012. Scripta materialia, 66 (5), 223–226. doi:10.1016/j.scriptamat.2011.10.042