High temperature oxidation protection in body-centered cubic superalloys
Kauffmann, A.; Gorr, B.; Heilmaier, M.
2025. Scripta Materialia, 267, Article no: 116784. doi:10.1016/j.scriptamat.2025.116784

Improved oxidation behavior of M–20Cr–20Ta (M: Ni, Fe, Co) ternary alloys by formation of complex Cr–Ta-based oxides
Tang, C.; Schäfer, B.; Schroer, C.; Gorr, B.
2025. Corrosion Science, 249, Article no: 112847. doi:10.1016/j.corsci.2025.112847

Experimental investigation and thermodynamic assessment of Cr-Mo-Si ternary system
Ramasamy Chitra, A.; Gorr, B.
2025, May 26. 52nd International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (2025), Busan, South Korea, May 25–30, 2025

Phase formation in Ta-Mo-Cr-Ti-Al refractory high entropy alloys: CALPHAD-aided prediction and experimental study
Khanchych, K.; Gorr, B.
2025, May. 52nd International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (2025), Busan, South Korea, May 25–30, 2025

High-dose neutron irradiation of beryllium and titanium beryllide: Summary and outlook
Chakin, V.; Rolli, R.; Schneider, H.-C.; Gaisin, R.; Vladimirov, P.; Klimenkov, M.; Duerrschnabel, M.; Zimber, N.; Rieth, M.; Gorr, B.; Hernández, F. A.; Radloff, D.; Fedorov, A.; Zmitko, M.; Nakamichi, M.; Udartsev, S.
2025. Nuclear Materials and Energy, 42, 101910. doi:10.1016/j.nme.2025.101910

Embrittlement of chromium alloys after neutron irradiation at high temperatures to damage doses of 10–46 dpa
Chakin, V.; Gaisin, R.; Bonnekoh, C.; Duerrschnabel, M.; Rieth, M.; Gorr, B.; Brodnikikovsky, M.; Krapivka, M.; Firstov, S.
2025. Nuclear Materials and Energy, 42, Article no: 101871. doi:10.1016/j.nme.2025.101871

Phase Equilibria in the V-Rich Region of the V-Si-B System at 1400 °C
Yang, W.; Hasemann, G.; Carrion Saldaña, M.; Gorr, B.; Schwaiger, R.; Krüger, M.
2025. Journal of Phase Equilibria and Diffusion, 46 (1), 151–169. doi:10.1007/s11669-025-01177-4

The W7-X ECRH gyrotron diamond output window: Oil and water cooled window performance at 1.5 MW operation
Aiello, G.; Gantenbein, G.; Gorr, B.; Jelonnek, J.; Laqua, H. P.; Meier, A.; Scherer, T.; Schreck, S.; Strauss, D.; Thumm, M.
2025. Fusion Engineering and Design, 211, 114814. doi:10.1016/j.fusengdes.2025.114814

Phase Evolution During High-Energy Ball Milling and Annealing of Ti-Doped Mo-V-Si-B Alloys
Zang, D.; Becker, J.; Betke, U.; Hasemann, G.; Khanchych, K.; Gorr, B.; Krüger, M.
2025. Materials, 18 (11), Art.-Nr.: 2494. doi:10.3390/ma18112494

CALPHAD‐Guided Prediction and Interpretation of Phase Formation in Ta–Mo–Cr–Ti–Al Refractory High‐Entropy Alloys
Khanchych, K.; Tang, C.; Schroer, C.; Schäfer, B.; Jung, J.; Dürrschnabel, M.; Jäntsch, U.; Gorr, B.
2025. Advanced Engineering Materials, Art.-Nr.: 2500527. doi:10.1002/adem.202500527

Mechanisms of Structure Evolution During Metal Deposition in Lithium- and Sodium-Metal Batteries. PhD dissertation
Becherer, J.
2024, October 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000174631

Modelling Single-Phase Disordered A2 Microstructure in TaMoCrTiAl-based Refractory High-Entropy Alloys
Khanchych, K.; Gorr, B.; Schroer, C.; Tang, C.
2024, September. Materials Science and Engineering Congress (MSE 2024), Darmstadt, Germany, September 24–26, 2024

Stability of Two-Phase Microstructures in Al-Containing Refractory Compositionally Complex Alloys
Yang, L.; Sen, S.; Vikram, R. J.; Schliephake, D.; Laube, S.; Pramanik, A.; Chauhan, A.; Gorr, B.; Heilmaier, M.; Kauffmann, A.
2024, August 20. 32nd International Materials Research Congress (IMRC 2024), Cancún, Mexico, August 18–23, 2024

Influence of oxygen content on the corrosion behavior of MoSiTi and AlCrTiMoTa alloys in liquid lead at 650 °C
Martini, F.; Schroer, C.; Hetzler, S.; Gorr, B.
2024, June. 11th International Symposium on High Temperature Corrosion and Protection of Materials (2024), Les Embiez, France, June 9–14, 2024

Steady laminar stagnation flow NH3-H2-air flame at a plane wall: Flame extinction limit and its influence on the thermo-mechanical stress and corrosive behavior of wall materials
Yu, C.; Srikanth, S.; Böhlke, T.; Gorr, B.; Maas, U.
2024. Applications in Energy and Combustion Science, 18, 100261. doi:10.1016/j.jaecs.2024.100261

Thermodynamics and experimental investigation of the internal oxidation of Fe-Cr-Al-(Y) alloys. PhD dissertation
Miran, S.
2024, January 31. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000167919

Thermodynamic assesment of Cr-Mo-Si system
Chitra, A. R.; Gorr, B.
2024. 51st International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD 2024), Mannheim, Germany, May 26–31, 2024

On the characterization of MPA CVD diamond for fracture toughness measurements
Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
2024. 49th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Perth, Australia, September 1–6, 2024

On the characterization of MPA CVD diamond for fracture toughness measurements
Aiello, G.; Bonnekoh, C.; Gabrusenoks, J.; Gorr, B.; Meier, A.; Popov, A. I.; Scherer, T. A.; Schreck, S.; Seemann, K. M.; Strauss, D.; Wild, C.; Woerner, E.
2024. 49th IEEE International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2024), Institute of Electrical and Electronics Engineers (IEEE)

Thermo-mechanische Modellierung interpenetrierender Metall-Keramik Verbundwerkstoffe auf Basis hochhomogener Schaumstrukturen. PhD dissertation
Horny, D.
2023, December 5. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000165179

Influence of the oxidation on the optical properties of Mo-Si-Ti, Ta-Mo-Cr-Al and Ta-Mo-Cr-Ti-Al alloys
Charpentier, L.; Kauffmann, A.; Bêche, E.; Escape, C.; Laube, S.; Schliephake, D.; Esvan, J.; Gorr, B.; Soum-Glaude, A.; Heilmaier, M.
2023. Materials Today Communications, 37, Art.-Nr.: 107056. doi:10.1016/j.mtcomm.2023.107056

Development of Refractory Metal-based CCAs with Improved Mechanical Properties
Laube, S.; Schellert, S.; Kauffmann, A.; Gorr, B.; Eggeler, Y. M.; Christ, H.-J.; Heilmaier, M.
2023, November 13. 3rd World Congress on High Entropy Alloys (HEA 2023), Pittsburgh, PA, USA, November 12–15, 2023

Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Kauffmann, A.; Laube, S.
2023, July 4. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023

Liquid metals in concentrating solar power and requirements on structural materials
Schroer, C.; Yurechko-Hussy, M.; Martini, F.; Bonnekoh, C.; Rieth, M.; Gorr, B.; Weisenburger, A.; Heinzel, A.; Fetzer, R.; Müller, G.; Fuchs, J.; Onea, A.; Ruck, S.; Stieglitz, R.
2023, June 13. Helmholtz Energy Conference (2023), Koblenz, Germany, June 12–13, 2023

Lanthanum plumbide as a new neutron multiplier material
Gaisin, R.; Pereslavtsev, P.; Baumgaertner, S.; Seemann, K.; Gaisina, E.; Chakin, V.; Udartsev, S.; Vladimirov, P.; Gorr, B.
2023. Journal of Materials Research and Technology, 24, 3399–3412. doi:10.1016/j.jmrt.2023.03.211

Formation of rutile (Cr,Ta,Ti)O₂ oxides during oxidation of refractory high entropy alloys in Ta-Mo-Cr-Ti-Al system
Schellert, S.; Weber, M.; Christ, H. J.; Wiktor, C.; Butz, B.; Galetz, M. C.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Gorr, B.
2023. Corrosion Science, 211, Art.Nr. 110885. doi:10.1016/j.corsci.2022.110885

Mechanical response of pesting-resistant Mo-Si-Ti alloys for high temperature applications
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Winkens, G.; Wu, H.; Thota, H.; Eggeler, Y.; Mücklich, F.; Engstler, M.; Gorr, B.; Heilmaier, M.
2023, January 6. International Conference on Plasticity, Damage, and Fracture (ICPDF 2023), Punta Cana, Dominican Republic, January 3–9, 2023

Towards fracture toughness measurements of MPA CVD diamond in nuclear fusion devices
Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T. A.; Strauss, D.; Wild, C.; Woerner, E.
2023. 48th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2023), Montreal, Canada, September 17–22, 2023

Towards Fracture Toughness Measurements of MPA CVD Diamond in Nuclear Fusion Devices
Aiello, G.; Estebanez, P.; Gorr, B.; Meier, A.; Schreck, S.; Scherer, T.; Strauss, D.; Wild, C.; Woerner, E.
2023. 2023 48th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Montreal, QC, 17th-22nd September 2023, 1–2, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IRMMW-THz57677.2023.10298860

Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Kauffmann, A.; Laube, S.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2023. International Conference on Processing & Manufacturing of Advanced Materials : Processing, Fabrication, Properties, Applications (Thermec 2023), Vienna, Austria, July 2–7, 2023

Thermodynamic modelling of the V–Ti–B system
Yazlak, M.; Christ, H.-J.; Yang, W.; Hasemann, G.; Krüger, M.; Gorr, B.
2022. Calphad, 79, Art.-Nr.: 102477. doi:10.1016/j.calphad.2022.102477

Pesting Resistance in High Mo Containing Alloys
Kauffmann, A.; Schliephake, D.; Obert, S.; Tirunilai, A. S.; Hinrichs, F.; Gorr, B.; Heilmaier, M.
2022, November 30. Materials Research Society: MRS Fall-Meeting and Exhibit (2022), Boston, MA, USA, November 27–December 2, 2022

Interface reactions of magnetron sputtered Si-based dual layer coating systems as oxidation protection for Mo-Si-Ti alloys
Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Schulz, U.
2022. Surface and Coatings Technology, 444, 128620. doi:10.1016/j.surfcoat.2022.128620

Pesting-Resistant Mo-Based Alloys
Obert, S.; Schliephake, D.; Hinrichs, F.; Tirunilai, A. S.; Cong, X.; Gorr, B.; Kauffmann, A.; Heilmaier, M.
2022, July 6. Scientific seminar of the Institut für Komplexe Materialien / Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden (IKM / IFW Dresden 2023), Dresden, Germany, July 6, 2022

Ternary Vss-V3Si-V5SiB2 eutectic formation in the V-Si-B system
Yang, W. G.; Hasemann, G.; Yazlak, M.; Gorr, B.; Schwaiger, R.; Krüger, M.
2022. Journal of Alloys and Compounds, 902, Art.Nr. 163722. doi:10.1016/j.jallcom.2022.163722

Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys
Laube, S.; Kauffmann, A.; Schellert, S.; Seils, S.; Tirunilai, A. S.; Greiner, C.; Eggeler, Y. M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2022. Science and Technology of Advanced Materials, 23 (1), 692–706. doi:10.1080/14686996.2022.2132118

Characterization of the Isothermal and Thermomechanical Fatigue Behavior of a Duplex Steel Considering the Alloy Microstructure
Schellert, S.; Müller, J.; Ohrndorf, A.; Gorr, B.; Butz, B.; Christ, H.-J.
2022. Metals, 12 (7), Art.Nr. 1161. doi:10.3390/met12071161

Oxidation mechanism of refractory high entropy alloys Ta-Mo-Cr-Ti-Al with varying Ta content
Schellert, S.; Gorr, B.; Laube, S.; Kauffmann, A.; Heilmaier, M.; Christ, H. J.
2021. Corrosion science, 192, Article no: 109861. doi:10.1016/j.corsci.2021.109861

Graded PVD Mo-Si interlayer between Si coating and Mo-Si-B alloys: Investigation of oxidation behaviour
Anton, R.; Hüning, S.; Laska, N.; Weber, M.; Schellert, S.; Gorr, B.; Christ, H.-J.; Schulz, U.
2021. Corrosion Science, 192, Art.-Nr.: 109843. doi:10.1016/j.corsci.2021.109843

Microstructure tailoring of Al-containing compositionally complex alloys by controlling the sequence of precipitation and ordering
Laube, S.; Schellert, S.; Srinivasan Tirunilai, A.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Acta Materialia, 218, Article no: 117217. doi:10.1016/j.actamat.2021.117217

The Effect of Al on the Formation of a CrTaO₄ Layer in Refractory High Entropy Alloys Ta-Mo-Cr-Ti-xAl
Schellert, S.; Gorr, B.; Christ, H.-J.; Pritzel, C.; Laube, S.; Kauffmann, A.; Heilmaier, M.
2021. Oxidation of metals, 96, 333–345. doi:10.1007/s11085-021-10046-7

Current Status of Research on the Oxidation Behavior of Refractory High Entropy Alloys
Gorr, B.; Schellert, S.; Müller, F.; Christ, H.-J.; Kauffmann, A.; Heilmaier, M.
2021. Advanced engineering materials, 23 (5), Art.-Nr.: 2001047. doi:10.1002/adem.202001047

Formation of complex intermetallic phases in novel refractory high-entropy alloys NbMoCrTiAl and TaMoCrTiAl: Thermodynamic assessment and experimental validation
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Laube, S.; Heilmaier, M.
2020. Journal of alloys and compounds, 842, Article no: 155726. doi:10.1016/j.jallcom.2020.155726

Effect of Y Additions on the Oxidation Behaviour of Novel Refractory High-Entropy Alloy NbMoCrTiAl at 1000 °C in Air
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Oxidation of metals, 94 (1-2), 147–163. doi:10.1007/s11085-020-09983-6

Effect of Different Cr and Ni Additions on Oxidation Behavior of Co-Re-Based Alloys
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2020. JOM, 72 (1), 393–402. doi:10.1007/s11837-019-03868-z

On the chemical and microstructural requirements for the pesting-resistance of Mo-Si-Ti alloys
Obert, S.; Kauffmann, A.; Seils, S.; Schellert, S.; Weber, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of materials research and technology, 9 (4), 8556–8567. doi:10.1016/j.jmrt.2020.06.002

Effect of Water Vapor on the Oxidation Behavior of the Eutectic High‐Temperature Alloy Mo‐20Si‐52.8Ti
Weber, M.; Gorr, B.; Christ, H.-J.; Obert, S.; Kauffmann, A.; Heilmaier, M.
2020. Advanced engineering materials, 22 (7), Art. Nr.: 2000219. doi:10.1002/adem.202000219

A new strategy to intrinsically protect refractory metal based alloys at ultra high temperatures
Gorr, B.; Müller, F.; Schellert, S.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2020. Corrosion science, 166, Art. Nr.: 108475. doi:10.1016/j.corsci.2020.108475

Controlling crystallographic ordering in Mo–Cr–Ti–Al high entropy alloys to enhance ductility
Laube, S.; Chen, H.; Kauffmann, A.; Schellert, S.; Müller, F.; Gorr, B.; Müller, J.; Butz, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of alloys and compounds, 823, Article No.153805. doi:10.1016/j.jallcom.2020.153805

The effect of Ni and Si additions on the oxidation behaviour of Co-17Re-18Cr alloys
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2019. Corrosion Science, 159, Artkl.Nr.: 108135. doi:10.1016/j.corsci.2019.108135

Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta-Nb-Mo-Cr-Ti-Al
Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C. H.; Harding, I.; Kumar, K. S.; Szabo, D. V.; Schlabach, S.; Kauffmann-Weiss, S.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Acta materialia, 176, 123–133. doi:10.1016/j.actamat.2019.07.001

On the oxidation mechanism of refractory high entropy alloys
Müller, F.; Gorr, B.; Christ, H.-J.; Müller, J.; Butz, B.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2019. Corrosion science, 159, Article: 108161. doi:10.1016/j.corsci.2019.108161

Experimentelle Charakterisierung und Simulation der Schädigungsentwicklung in Vorgerüst-Arbeitswalzen
Fota, K.; Cestonaro, A.; Heisterkamp, P.; Spannagel, F.; Jacke, H.; Gorr, B.; Christ, H.-J.
2019. Hrsg.: H.-J. Christ Prüftechnik – Kennwertermittlung – Schadensvermeidung, Tagung Werkstoffprüfung 2019, 03.-04. Dez. 2019 in Neu-Ulm, INVENTUM GmbH, Sankt Augistin, 2019, 385–390

Constitution, oxidation and creep of eutectic and eutectoid Mo-Si-Ti alloys
Schliephake, D.; Kauffmann, A.; Cong, X.; Gombola, C.; Azim, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Intermetallics, 104, 133–142. doi:10.1016/j.intermet.2018.10.028

The effect of Ni additions on the oxidation behaviour of Co–Re–Cr high-temperature alloys
Esleben, K.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2018. Materials at High Temperatures, 35 (1-3), 177–186. doi:10.1080/09603409.2017.1392111

Contribution of Lattice Distortion to Solid Solution Strengthening in a Series of Refractory High Entropy Alloys
Chen, H.; Kauffmann, A.; Laube, S.; Choi, I.-C.; Schwaiger, R.; Huang, Y.; Lichtenberg, K.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2018. Metallurgical and materials transactions / A, 49 (3), 772–781. doi:10.1007/s11661-017-4386-1

Influence of σ Phase on the Allotropic Transformation of the Matrix in Co-Re-Cr-Based Alloys with Ni Addition
Dörries, K.; Mukherji, D.; Rösler, J.; Esleben, K.; Gorr, B.; Christ, H.-J.
2018. Metals, 8 (9), Artkl.Nr.: 706. doi:10.3390/met8090706

Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy
Gorr, B.; Mueller, F.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Schweiger, R.; Szabo, D. V.; Heilmaier, M.
2018. TMS 2018. 147th Annual Meeting & Exhibition Supplemental Proceedings (TMS), 647–659, Springer. doi:10.1007/978-3-319-72526-0_61

Combinatorial exploration of the high entropy alloy system Co-Cr-Fe-Mn-Ni
Kauffmann, A.; Stüber, M.; Leiste, H.; Ulrich, S.; Schlabach, S.; Szabo, D. V.; Seils, S.; Gorr, B.; Chen, H.; Seifert, H.-J.; Heilmaier, M.
2017. Surface and coatings technology, 325, 174–180. doi:10.1016/j.surfcoat.2017.06.041

Effect of Ti addition on the thermal expansion anisotropy of Mo₅Si₃
Azim, M. A.; Christ, H.-J.; Gorr, B.; Kowald, T.; Lenchuk, O.; Albe, K.; Heilmaier, M.
2017. Acta materialia, 132, 25–34. doi:10.1016/j.actamat.2017.02.066

Effect of Atmosphere and Sample Thickness on Kinetics, Microstructure, and Compressive Stresses of Chromia Scale Grown on Ni–25Cr
Simon, D.; Gorr, B.; Christ, H. J.
2017. Oxidation of Metals, 87 (3-4), 417–429. doi:10.1007/s11085-016-9702-4

Deformation Mechanisms in FCC and BCC High Entropy Alloys
Heilmaier, M.; Kauffmann, A.; Chen, H.; Schwaiger, R.; Choi, I.-C.; Sas, J.; Weiss, K. P.; Gorr, B.; Müller, F.; Christ, H.-J.; Sarma, V. S.; Freudenberger, J.
2017. Recent Progress in High Entropy and Compositionally Complex Alloys (2017), Bochum, Germany, January 12–13, 2017

Effect of microalloying with silicon on high temperature oxidation resistance of novel refractory high-entropy alloy Ta-Mo-Cr-Ti-Al
Müller, F.; Gorr, B.; Christ, H.-J.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Materials at high temperatures, 35 (1-3), 168–176. doi:10.1080/09603409.2017.1389115

Effect of Ti content and nitrogen on the high-temperature oxidation behavior of (Mo,Ti)5Si3
Azim, M. A.; Gorr, B.; Christ, H.-J.; Lenchuk, O.; Albe, K.; Schliephake, D.; Heilmaier, M.
2017. Intermetallics, 90, 103–112. doi:10.1016/j.intermet.2017.05.023

Characterization of Oxidation Kinetics of Mo-Si-B-Based Materials
Azim, M. A.; Gorr, B.; Christ, H.-J.; Heilmaier, M.; Koch, U.; Engelhard, M.
2017. Oxidation of metals, 87 (1-2), 89–108. doi:10.1007/s11085-016-9659-3

High-Temperature Oxidation Behavior of Refractory High-Entropy Alloys : Effect of Alloy Composition
Gorr, B.; Müller, F.; Azim, M.; Christ, H.-J.; Müller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2017. Oxidation of metals, 88 (3-4), 339–349. doi:10.1007/s11085-016-9696-y

Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al
Chen, H.; Kauffmann, A.; Gorr, B.; Schliephake, D.; Seemüller, C.; Wagner, J. N.; Christ, H.-J.; Heilmaier, M.
2016. Journal of alloys and compounds, 661, 206–215. doi:10.1016/j.jallcom.2015.11.050

High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb-20Mo-20Cr-20Ti-20Al with and without Si addition
Gorr, B.; Mueller, F.; Christ, H.-J.; Mueller, T.; Chen, H.; Kauffmann, A.; Heilmaier, M.
2016. Journal of alloys and compounds, 688, Part B, 468–477. doi:10.1016/j.jallcom.2016.07.219

Microstructure Evolution in a New Refractory High-Entropy Alloy W-Mo-Cr-Ti-Al
Gorr, B.; Azim, M.; Christ, H.-J.; Chen, H.; Szabo, D. V.; Kauffmann, A.; Heilmaier, M.
2016. Metallurgical and Materials Transactions A, 47, 961–970. doi:10.1007/s11661-015-3246-0

Scaling Kinetics and Scale Microstructure of Chromia Scales Formed on Ni-25%Cr Model Alloy during Oxidation in H 2 o-Containing High and Low pO 2 Test Gas at 1000°C
Hänsel, M.; Shemet, V.; Turan, E.; Kijatkin, I.; Simon, D.; Gorr, B.; Christ, H.-J.
2015. ECS Transactions, 66 (18), 1–21. doi:10.1149/06618.0001ecst

Microstructure and Oxidation Mechanism Evolution of Co–17Re–25Cr–2Si in the Temperature Range 800–1,100 °C
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2015. Oxidation of Metals, 83 (5-6), 465–483. doi:10.1007/s11085-014-9515-2

The effect of alloyed nickel on the short-term high temperature oxidation behaviour of Co–Re–Cr-based alloys
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2015. Corrosion Science, 93, 19–26. doi:10.1016/j.corsci.2015.01.004

Effect of specimen thickness on chromia scaling of Ni25Cr in N 2 –O 2 –H 2 O test gases at 1000°C
Hänsel, M.; Turan, E.; Shemet, V.; Grüner, D.; Breuer, U.; Simon, D.; Gorr, B.; Christ, H.-J.; Quadakkers, W. J.
2015. Materials at High Temperatures, 32 (1-2), 160–166. doi:10.1179/0960340914Z.00000000092

Effect of in-situ gas changes on thermally grown chromia scales formed on Ni–25Cr alloy at 1000°C in atmospheres with and without water vapour
Simon, D.; Gorr, B.; Hänsel, M.; Shemet, V.; Christ, H.-J.; Quadakkers, W. J.
2015. Materials at High Temperatures, 32 (1-2), 238–247. doi:10.1179/0960340914Z.000000000108

Mechanisms of oxide scale formation on yttrium-alloyed Mo-Si-B containing fine-grained microstructure
Majumdar, S.; Dönges, B.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
2015. Corrosion science, 90, 76–88. doi:10.1016/j.corsci.2014.09.017

Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys
Gorr, B.; Azim, M.; Christ, H.-J.; Mueller, T.; Schliephake, D.; Heilmaier, M.
2015. Journal of alloys and compounds, 624, 270–278. doi:10.1016/j.jallcom.2014.11.012

Creep Resistance and Oxidation Behavior of Novel Mo-Si-B-Ti Alloys
Azim, M. A.; Schliephake, D.; Hochmuth, C.; Gorr, B.; Christ, H.-J.; Glatzel, U.; Heilmaier, M.
2015. JOM, 67 (11), 2621–2628. doi:10.1007/s11837-015-1560-z

Oxidation mechanisms of lanthanum-alloyed Mo–Si–B
Majumdar, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.
2014. Corrosion Science, 88, 360–371. doi:10.1016/j.corsci.2014.07.058

High-temperature oxidation behavior of Mo-Si-B-based and Co-Re-Cr-based alloys
Gorr, B.; Wang, L.; Burk, S.; Azim, M.; Majumdar, S.; Christ, H.-J.; Mukherji, D.; Rösler, J.; Schliephake, D.; Heilmaier, M.
2014. Intermetallics, 48, 34–43. doi:10.1016/j.intermet.2013.10.008

Thermodynamic calculations in the development of high-temperature Co–Re-based alloys
Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2014. Journal of Alloys and Compounds, 582, 50–58. doi:10.1016/j.jallcom.2013.07.055

High-Temperature Creep and Oxidation Behavior of Mo-Si-B Alloys with High Ti Contents
Schliephake, D.; Azim, M.; Klinski-Wetzel, K. von; Gorr, B.; Christ, H.-J.; Bei, H.; George, E. P.; Heilmaier, M.
2014. Metallurgical and materials transactions / A, 45 (3), 1102–1111. doi:10.1007/s11661-013-1944-z

Effect of Ti (Macro-) Alloying on the High-Temperature Oxidation Behavior of Ternary Mo–Si–B Alloys at 820–1,300 °C
Azimovna Azim, M.; Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Bornemann, R.; Bolívar, P. H.
2013. Oxidation of metals, 80 (3-4), 231–242. doi:10.1007/s11085-013-9375-1

Optimization of Cr-Content for High-Temperature Oxidation Behavior of Co–Re–Si-Base Alloys
Wang, L.; Gorr, B.; Christ, H.-J.; Mukherji, D.; Rösler, J.
2013. Oxidation of Metals, 80 (1-2), 49–59. doi:10.1007/s11085-013-9369-z

Effect of Yttrium Alloying on Intermediate to High-Temperature Oxidation Behavior of Mo-Si-B Alloys
Majumdar, S.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2013. Metallurgical and materials transactions / A, 44 (5), 2243–2257. doi:10.1007/s11661-012-1589-3

Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
Gorr, B.; Burk, S.; Depka, T.; Somsen, C.; Abu-Samra, H.; Christ, H.-J.; Eggeler, G.
2012. International Journal of Materials Research, 103 (1), 24–30. doi:10.3139/146.110626

High-temperature oxidation behaviour of a single phase (Mo,Ti)5Si3 (Mo-Si-Ti) alloy
Burk, S.; Gorr, B.; Christ, H.-J.; Schliephake, D.; Heilmaier, M.; Hochmuth, C.; Glatzel, U.
2012. Scripta materialia, 66 (5), 223–226. doi:10.1016/j.scriptamat.2011.10.042

Oxidation behavior of Mo-Si-B-(X) alloys: Macro- and microalloying (X= Cr, Zr, La2O3)
Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
2011. JOM, 63 (12), 32–36. doi:10.1007/s11837-011-0203-2

High-Temperature Oxidation Behaviour of Co-Re-Cr-Based Alloys: Limitations and Ways to Improve
Gorr, B.; Christ, H.-J.
2011. Advanced Materials Research, 278, 545–550. doi:10.4028/www.scientific.net/AMR.278.545

Oxidation Performance of Mo‐Si‐B Alloys: Implications through Alloying and Pre‐Treatment
Burk, S.; Gorr, B.; Christ, H.-J.
2011. Supplemental Proceedings – Materials Processing and Energy Materials, 627–634, John Wiley and Sons. doi:10.1002/9781118062111.ch72

Oxidation behaviour of Mo-Si-B-(X) alloys: Macro- and Microalloying (X= Cr, Zr, La2O3)
Burk, S.; Gorr, B.; Krüger, M.; Heilmaier, M.; Christ, H.-J.
2011. JOM: The Journal of the Minerals, Metals & Materials Society, 63 (12), 32–36

The Effect of Pre-Oxidation Treatment on the High-Temperature Oxidation of Co–Re–Cr Model Alloys at Laboratory Air
Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
2010. Oxidation of Metals, 74 (5-6), 239–253. doi:10.1007/s11085-010-9213-7

High temperature oxidation of Mo–Si–B alloys: Effect of low and very low oxygen partial pressures
Burk, S.; Gorr, B.; Christ, H.-J.
2010. Acta Materialia, 58 (18), 6154–6165. doi:10.1016/j.actamat.2010.07.034

High‐temperature oxidation behaviour of model CoReCr alloys at low oxygen partial pressure
Gorr, B.; Burk, S.; Trindade, V. B.; Christ, H.-J.
2010. Materials and Corrosion, 61 (9), 741–747. doi:10.1002/maco.200905412

Effect of Zr Addition on the High-Temperature Oxidation Behaviour of Mo–Si–B Alloys
Burk, S.; Gorr, B.; Trindade, V. B.; Christ, H.-J.
2010. Oxidation of Metals, 73 (1-2), 163–181. doi:10.1007/s11085-009-9175-9

Metallic materials for structural applications beyond nickel-based superalloys
Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
2009. JOM, 61 (7), 61–67. doi:10.1007/s11837-009-0106-7

High temperature oxidation of mechanically alloyed Mo–Si–B alloys
Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ, H.-J.
2009. Corrosion Engineering, Science and Technology, 44 (3), 168–175. doi:10.1179/174327809X419122

Oxidation behaviour of model Co–Re alloys during exposure to laboratory air at 1000°C
Gorr, B.; Trindade, V. B.; Burk, S.; Christ, H.-J.
2009. Corrosion Engineering, Science and Technology, 44 (3), 176–181. doi:10.1179/174327809X419131

Oxidation Behaviour of Model Cobalt-Rhenium Alloys During Short-Term Exposure to Laboratory Air at Elevated Temperature
Gorr, B.; Trindade, V.; Burk, S.; Christ, H.-J.; Klauke, M.; Mukherji, D.; Rösler, J.
2009. Oxidation of Metals, 71 (3-4), 157–172. doi:10.1007/s11085-008-9133-y

Oxidation behaviour of experimental Co–Re-base alloys in laboratory air at 1000°C
Klauke, M.; Mukherji, D.; Gorr, B.; da Trindade Filho, V. B.; Rösler, J.; Christ, H.-J.
2009. International Journal of Materials Research, 100 (1), 104–111. doi:10.3139/146.101792

Metallic materials for structural applications beyond nickel-based superalloys
Heilmaier, M.; Krüger, M.; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, C.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
2009. JOM: The Journal of the Minerals, Metals & Materials Society, 61 (7), 61–67

Experimental analysis and computer‐based simulation of nitridation of Ni‐base alloys—the effect of a pre‐oxidation treatment
Trindade, V. B.; Krupp, U.; Gorr, B.; Kaczorowski, D.; Girardin, G.; Christ, H.-J.
2008. Materials and Corrosion, 59 (7), 602–608. doi:10.1002/maco.200804144

High temperature oxidation of multiphase Mo-Si-B-X alloys
Burk, S.; Gorr, B.; Trindade, V. B.; Krupp, U.; Christ:, H.-J.
2008. Managing Corrosion for Sustainability, Proc. of EUROCORR 2008 – The European Corrosion Congress, 7.-11. September 2008, Edinburgh, UK, European Federation of Corrosion

Characterizing the Carburization of Ethylene Pyrolysis Tubes by Means of Non-Destructive Magnetic Measurements and Thermodynamics Calculations
Trindade, V. B.; Silva, I. C.; Gorr, B.; Dille, J.; Jacques, P. J.; Rebello, J. M. A.; Bruno, A. C.; Christ, H.-J.
2007. Annual Congress of the European Federation of Corrosion (EUROCORR) 2007, Annual Congress of the European Federation of Corrosion (2007), Freiburg im Breisgau, Deutschland, 09.09.2007–13.09.2007