Research Data


Yang, L.; Sen, S.; Schliephake, D.; Vikram, R. J.; Laube, S.; Pramanik, A.; Chauhan, A.; Heilmaier, M.; Kauffmann, A. (2024, September 5). Data from "Creep behavior of a precipitation-strengthened A2-B2 refractory high entropy alloy". doi:10.35097/0mv9vfxr8rjxbpdj 
Grosselindemann, C.; Dorn, M.; Bauer, F. M.; Seim, M.; Ewald, D. T.; Esau, D.; Geörg, M.; Rössler, R.; Pundt, A.; Weber, A. (2024, June 28). Pressurized Single Cell Testing of Solid Oxide Cells. doi:10.35097/1971 
Drescher, S.; Seils, S.; Boll, T.; Kauffmann, A.; Heilmaier, M.; Freudenberger, J. (2024, June 26). Research data from "Solid solution strengthening in single-phase Au-Cu-Ni-Pd-Pt-based high-entropy alloys". doi:10.35097/1832 
Jin, O. (2024, May 23). Raw data to the dissertation "Advanced TEM Investigations on the Effect of Additives for Reactive Hydride Composites’. doi:10.35097/pisrBTMvTriAuaJx 
Schlabach, S.; Wild, J.; Petkau, O.; Selzer, M.; Dorothee-Vinga Szabo. (2024, May 21). Using ELN Functionality of Kadi4Mat (KadiWeb) in a Materials Science Case Study of a User Facility. doi:10.5281/zenodo.11234285 
Schliephake, D.; Thota, H.; Kauffmann, A.; Wu, H.; Pundt, A.; Heilmaier, M.; Eggeler, Y. M. M. (2024, March 28). Raw Data to "The Creep-induced Micro- and Nanostructural Evolution of a Eutectic Mo-Si-Ti Alloy at 1200 °C". doi:10.35097/UevKjgWEpsUxGdfh 
Laube, S.; Winkens, G.; Kauffmann, A.; Li, J.; Kirchlechner, C.; Heilmaier, M. (2024, February 29). Raw Data to "Strength of Disordered and Ordered Al‐containing Refractory High Entropy Alloys". doi:10.35097/1784 
Hinrichs, F.; Winkens, G.; Kramer, L. K.; Schliephake, D.; Falcão, G.; Galetz, M. C.; Inui, H.; Kauffmann, A.; Heilmaier, M. (2024, January 11). Raw Data to "Overcoming barriers for high temperature alloys: oxidation and ductility". doi:10.35097/1866 
Fu, Q.; Wu, X.; Luo, X.; Ding, Z.; Indris, S.; Sarapulova, A.; Meng, Z.; Desmau, M.; Wang, Z.; Hua, W.; Kübel, C. K. U.; Schwarz, B.; Knapp, M.; Ehrenberg, H.; Wei, Y.; Dsoke, S. (2024, January 4). Ca2+ Pre-Intercalated Bilayered Vanadium Oxide for High-Performance Aqueous Mg-Ion Batteries. doi:10.35097/1858 
Mazilkin, A.; Tavakkoli, V.; Davydenko, O.; Beygelzimer, Y.; Boltynjuk, E.; Boll, T.; Straumal, B.; Baretzky, B.; Estrin, Y.; Kulagin, R. (2023, November 29). Mechanisms of structural evolution of laminates with immiscible components under high-pressure torsion. doi:10.35097/1825 
Blarr, J.; Klinder, S. (2023, November 27). 2D images of CT scans of carbon fiber reinforced polyamide 6. doi:10.35097/1822 
Winkens, G. (2023, November 2). Model code to "Strength of Disordered and Ordered Al‐containing Refractory High Entropy Alloys". doi:10.35097/1786 
Kübel, C.; Tavakkoli, V. (2023, October 30). Exploring precipitates in a severely deformed Al-Mg-Si alloy at the atomic level. (T. Scherer, A. Mazilkin & Y. Ivanisenko, Eds.). doi:10.35097/1780 
Pantenburg, I.; Cronau, M.; Boll, T.; Duncker, A.; Roling, B. (2023, October 19). Data for "Challenging Prevalent Solid Electrolyte Interphase (SEI) Models: An Atom Probe Tomography Study on a Commercial Graphite Electrode". doi:10.35097/1767 
Blarr, J. (2023, August 21). Computed tomography scans of 15 different carbon fiber reinforced polyamide 6 specimens (both original files (16 bit) and files of further cut scans (8 bit)). doi:10.35097/1707 
Winkens, G. (2023, August 3). Solid solution strengthening in Mo-Nb modelled using the Suzuki approach. doi:10.35097/1658 
Nizamoglu, S.; Gedsun, A.; Kauffmann, A. (2023, April 14). Raw Data to "Microstructure and mechanical properties of a precipitation-strengthened Fe-Al-Nb alloy". doi:10.5445/IR/1000157792 
Winkens, G. (2023, March 28). Model code to "The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys". doi:10.5445/IR/1000157208 
Winkens, G.; Kauffmann, A. (2023, March 28). Raw Data to "The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys". doi:10.5445/IR/1000157205 
Eusterholz, M. K.; Boll, T.; Ott, V.; Stüber, M.; Lu, Y.; Gebauer, J.; Ulrich, S.; Kauffmann, A.; Heilmaier, M. (2023, March 20). Research data for 10.1002/adem.202201441. doi:10.5445/IR/1000156942 
Blarr, J. (2022, December 27). 3D µCT images of specimens of carbon fiber reinforced polyamide 6 plaque, fiber orientation tensor data of these images, and three Python code files for two different algebraic and one machine learning based tensor interpolation algorithms. doi:10.5445/IR/1000153725 
Jin, O.; Shang, Y.; Huang, X.; Szabo, D. V.; Le, T. T.; Wagner, S.; Klassen, T.; Kubel, C.; Pistidda, C.; Pundt, A. (2022, October 24). Transformation Kinetics of LiBH–MgH for Hydrogen Storage. doi:10.5445/IR/1000150744 
Jin, O. (2021, December 9). Microstructural study of MgB in the LiBH-MgH composite by TEM. doi:10.5445/IR/1000140178 
Dollmann, A.; Mantha, L. S. (2021, November 12). Raw Data to the publication "Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios". doi:10.5445/IR/1000139657 
Laube, S. (2019, October 11). SEM, FIB, STEM images. XRD data. Raw Friction data. doi:10.5445/IR/1000098894